| /* |
| * QEMU ARM CPU |
| * |
| * Copyright (c) 2012 SUSE LINUX Products GmbH |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see |
| * <http://www.gnu.org/licenses/gpl-2.0.html> |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "target/arm/idau.h" |
| #include "qemu/error-report.h" |
| #include "qapi/error.h" |
| #include "cpu.h" |
| #include "internals.h" |
| #include "qemu-common.h" |
| #include "exec/exec-all.h" |
| #include "hw/qdev-properties.h" |
| #if !defined(CONFIG_USER_ONLY) |
| #include "hw/loader.h" |
| #endif |
| #include "hw/arm/arm.h" |
| #include "sysemu/sysemu.h" |
| #include "sysemu/hw_accel.h" |
| #include "kvm_arm.h" |
| #include "disas/capstone.h" |
| #include "fpu/softfloat.h" |
| |
| static void arm_cpu_set_pc(CPUState *cs, vaddr value) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| |
| cpu->env.regs[15] = value; |
| } |
| |
| static bool arm_cpu_has_work(CPUState *cs) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| |
| return (cpu->power_state != PSCI_OFF) |
| && cs->interrupt_request & |
| (CPU_INTERRUPT_FIQ | CPU_INTERRUPT_HARD |
| | CPU_INTERRUPT_VFIQ | CPU_INTERRUPT_VIRQ |
| | CPU_INTERRUPT_EXITTB); |
| } |
| |
| void arm_register_pre_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, |
| void *opaque) |
| { |
| ARMELChangeHook *entry = g_new0(ARMELChangeHook, 1); |
| |
| entry->hook = hook; |
| entry->opaque = opaque; |
| |
| QLIST_INSERT_HEAD(&cpu->pre_el_change_hooks, entry, node); |
| } |
| |
| void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHookFn *hook, |
| void *opaque) |
| { |
| ARMELChangeHook *entry = g_new0(ARMELChangeHook, 1); |
| |
| entry->hook = hook; |
| entry->opaque = opaque; |
| |
| QLIST_INSERT_HEAD(&cpu->el_change_hooks, entry, node); |
| } |
| |
| static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) |
| { |
| /* Reset a single ARMCPRegInfo register */ |
| ARMCPRegInfo *ri = value; |
| ARMCPU *cpu = opaque; |
| |
| if (ri->type & (ARM_CP_SPECIAL | ARM_CP_ALIAS)) { |
| return; |
| } |
| |
| if (ri->resetfn) { |
| ri->resetfn(&cpu->env, ri); |
| return; |
| } |
| |
| /* A zero offset is never possible as it would be regs[0] |
| * so we use it to indicate that reset is being handled elsewhere. |
| * This is basically only used for fields in non-core coprocessors |
| * (like the pxa2xx ones). |
| */ |
| if (!ri->fieldoffset) { |
| return; |
| } |
| |
| if (cpreg_field_is_64bit(ri)) { |
| CPREG_FIELD64(&cpu->env, ri) = ri->resetvalue; |
| } else { |
| CPREG_FIELD32(&cpu->env, ri) = ri->resetvalue; |
| } |
| } |
| |
| static void cp_reg_check_reset(gpointer key, gpointer value, gpointer opaque) |
| { |
| /* Purely an assertion check: we've already done reset once, |
| * so now check that running the reset for the cpreg doesn't |
| * change its value. This traps bugs where two different cpregs |
| * both try to reset the same state field but to different values. |
| */ |
| ARMCPRegInfo *ri = value; |
| ARMCPU *cpu = opaque; |
| uint64_t oldvalue, newvalue; |
| |
| if (ri->type & (ARM_CP_SPECIAL | ARM_CP_ALIAS | ARM_CP_NO_RAW)) { |
| return; |
| } |
| |
| oldvalue = read_raw_cp_reg(&cpu->env, ri); |
| cp_reg_reset(key, value, opaque); |
| newvalue = read_raw_cp_reg(&cpu->env, ri); |
| assert(oldvalue == newvalue); |
| } |
| |
| /* CPUClass::reset() */ |
| static void arm_cpu_reset(CPUState *s) |
| { |
| ARMCPU *cpu = ARM_CPU(s); |
| ARMCPUClass *acc = ARM_CPU_GET_CLASS(cpu); |
| CPUARMState *env = &cpu->env; |
| |
| acc->parent_reset(s); |
| |
| memset(env, 0, offsetof(CPUARMState, end_reset_fields)); |
| |
| g_hash_table_foreach(cpu->cp_regs, cp_reg_reset, cpu); |
| g_hash_table_foreach(cpu->cp_regs, cp_reg_check_reset, cpu); |
| |
| env->vfp.xregs[ARM_VFP_FPSID] = cpu->reset_fpsid; |
| env->vfp.xregs[ARM_VFP_MVFR0] = cpu->mvfr0; |
| env->vfp.xregs[ARM_VFP_MVFR1] = cpu->mvfr1; |
| env->vfp.xregs[ARM_VFP_MVFR2] = cpu->mvfr2; |
| |
| cpu->power_state = cpu->start_powered_off ? PSCI_OFF : PSCI_ON; |
| s->halted = cpu->start_powered_off; |
| |
| if (arm_feature(env, ARM_FEATURE_IWMMXT)) { |
| env->iwmmxt.cregs[ARM_IWMMXT_wCID] = 0x69051000 | 'Q'; |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_AARCH64)) { |
| /* 64 bit CPUs always start in 64 bit mode */ |
| env->aarch64 = 1; |
| #if defined(CONFIG_USER_ONLY) |
| env->pstate = PSTATE_MODE_EL0t; |
| /* Userspace expects access to DC ZVA, CTL_EL0 and the cache ops */ |
| env->cp15.sctlr_el[1] |= SCTLR_UCT | SCTLR_UCI | SCTLR_DZE; |
| /* and to the FP/Neon instructions */ |
| env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 20, 2, 3); |
| #else |
| /* Reset into the highest available EL */ |
| if (arm_feature(env, ARM_FEATURE_EL3)) { |
| env->pstate = PSTATE_MODE_EL3h; |
| } else if (arm_feature(env, ARM_FEATURE_EL2)) { |
| env->pstate = PSTATE_MODE_EL2h; |
| } else { |
| env->pstate = PSTATE_MODE_EL1h; |
| } |
| env->pc = cpu->rvbar; |
| #endif |
| } else { |
| #if defined(CONFIG_USER_ONLY) |
| /* Userspace expects access to cp10 and cp11 for FP/Neon */ |
| env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 20, 4, 0xf); |
| #endif |
| } |
| |
| #if defined(CONFIG_USER_ONLY) |
| env->uncached_cpsr = ARM_CPU_MODE_USR; |
| /* For user mode we must enable access to coprocessors */ |
| env->vfp.xregs[ARM_VFP_FPEXC] = 1 << 30; |
| if (arm_feature(env, ARM_FEATURE_IWMMXT)) { |
| env->cp15.c15_cpar = 3; |
| } else if (arm_feature(env, ARM_FEATURE_XSCALE)) { |
| env->cp15.c15_cpar = 1; |
| } |
| #else |
| /* SVC mode with interrupts disabled. */ |
| env->uncached_cpsr = ARM_CPU_MODE_SVC; |
| env->daif = PSTATE_D | PSTATE_A | PSTATE_I | PSTATE_F; |
| |
| if (arm_feature(env, ARM_FEATURE_M)) { |
| uint32_t initial_msp; /* Loaded from 0x0 */ |
| uint32_t initial_pc; /* Loaded from 0x4 */ |
| uint8_t *rom; |
| uint32_t vecbase; |
| |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { |
| env->v7m.secure = true; |
| } else { |
| /* This bit resets to 0 if security is supported, but 1 if |
| * it is not. The bit is not present in v7M, but we set it |
| * here so we can avoid having to make checks on it conditional |
| * on ARM_FEATURE_V8 (we don't let the guest see the bit). |
| */ |
| env->v7m.aircr = R_V7M_AIRCR_BFHFNMINS_MASK; |
| } |
| |
| /* In v7M the reset value of this bit is IMPDEF, but ARM recommends |
| * that it resets to 1, so QEMU always does that rather than making |
| * it dependent on CPU model. In v8M it is RES1. |
| */ |
| env->v7m.ccr[M_REG_NS] = R_V7M_CCR_STKALIGN_MASK; |
| env->v7m.ccr[M_REG_S] = R_V7M_CCR_STKALIGN_MASK; |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| /* in v8M the NONBASETHRDENA bit [0] is RES1 */ |
| env->v7m.ccr[M_REG_NS] |= R_V7M_CCR_NONBASETHRDENA_MASK; |
| env->v7m.ccr[M_REG_S] |= R_V7M_CCR_NONBASETHRDENA_MASK; |
| } |
| |
| /* Unlike A/R profile, M profile defines the reset LR value */ |
| env->regs[14] = 0xffffffff; |
| |
| env->v7m.vecbase[M_REG_S] = cpu->init_svtor & 0xffffff80; |
| |
| /* Load the initial SP and PC from offset 0 and 4 in the vector table */ |
| vecbase = env->v7m.vecbase[env->v7m.secure]; |
| rom = rom_ptr(vecbase); |
| if (rom) { |
| /* Address zero is covered by ROM which hasn't yet been |
| * copied into physical memory. |
| */ |
| initial_msp = ldl_p(rom); |
| initial_pc = ldl_p(rom + 4); |
| } else { |
| /* Address zero not covered by a ROM blob, or the ROM blob |
| * is in non-modifiable memory and this is a second reset after |
| * it got copied into memory. In the latter case, rom_ptr |
| * will return a NULL pointer and we should use ldl_phys instead. |
| */ |
| initial_msp = ldl_phys(s->as, vecbase); |
| initial_pc = ldl_phys(s->as, vecbase + 4); |
| } |
| |
| env->regs[13] = initial_msp & 0xFFFFFFFC; |
| env->regs[15] = initial_pc & ~1; |
| env->thumb = initial_pc & 1; |
| } |
| |
| /* AArch32 has a hard highvec setting of 0xFFFF0000. If we are currently |
| * executing as AArch32 then check if highvecs are enabled and |
| * adjust the PC accordingly. |
| */ |
| if (A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_V) { |
| env->regs[15] = 0xFFFF0000; |
| } |
| |
| /* M profile requires that reset clears the exclusive monitor; |
| * A profile does not, but clearing it makes more sense than having it |
| * set with an exclusive access on address zero. |
| */ |
| arm_clear_exclusive(env); |
| |
| env->vfp.xregs[ARM_VFP_FPEXC] = 0; |
| #endif |
| |
| if (arm_feature(env, ARM_FEATURE_PMSA)) { |
| if (cpu->pmsav7_dregion > 0) { |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| memset(env->pmsav8.rbar[M_REG_NS], 0, |
| sizeof(*env->pmsav8.rbar[M_REG_NS]) |
| * cpu->pmsav7_dregion); |
| memset(env->pmsav8.rlar[M_REG_NS], 0, |
| sizeof(*env->pmsav8.rlar[M_REG_NS]) |
| * cpu->pmsav7_dregion); |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { |
| memset(env->pmsav8.rbar[M_REG_S], 0, |
| sizeof(*env->pmsav8.rbar[M_REG_S]) |
| * cpu->pmsav7_dregion); |
| memset(env->pmsav8.rlar[M_REG_S], 0, |
| sizeof(*env->pmsav8.rlar[M_REG_S]) |
| * cpu->pmsav7_dregion); |
| } |
| } else if (arm_feature(env, ARM_FEATURE_V7)) { |
| memset(env->pmsav7.drbar, 0, |
| sizeof(*env->pmsav7.drbar) * cpu->pmsav7_dregion); |
| memset(env->pmsav7.drsr, 0, |
| sizeof(*env->pmsav7.drsr) * cpu->pmsav7_dregion); |
| memset(env->pmsav7.dracr, 0, |
| sizeof(*env->pmsav7.dracr) * cpu->pmsav7_dregion); |
| } |
| } |
| env->pmsav7.rnr[M_REG_NS] = 0; |
| env->pmsav7.rnr[M_REG_S] = 0; |
| env->pmsav8.mair0[M_REG_NS] = 0; |
| env->pmsav8.mair0[M_REG_S] = 0; |
| env->pmsav8.mair1[M_REG_NS] = 0; |
| env->pmsav8.mair1[M_REG_S] = 0; |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { |
| if (cpu->sau_sregion > 0) { |
| memset(env->sau.rbar, 0, sizeof(*env->sau.rbar) * cpu->sau_sregion); |
| memset(env->sau.rlar, 0, sizeof(*env->sau.rlar) * cpu->sau_sregion); |
| } |
| env->sau.rnr = 0; |
| /* SAU_CTRL reset value is IMPDEF; we choose 0, which is what |
| * the Cortex-M33 does. |
| */ |
| env->sau.ctrl = 0; |
| } |
| |
| set_flush_to_zero(1, &env->vfp.standard_fp_status); |
| set_flush_inputs_to_zero(1, &env->vfp.standard_fp_status); |
| set_default_nan_mode(1, &env->vfp.standard_fp_status); |
| set_float_detect_tininess(float_tininess_before_rounding, |
| &env->vfp.fp_status); |
| set_float_detect_tininess(float_tininess_before_rounding, |
| &env->vfp.standard_fp_status); |
| set_float_detect_tininess(float_tininess_before_rounding, |
| &env->vfp.fp_status_f16); |
| #ifndef CONFIG_USER_ONLY |
| if (kvm_enabled()) { |
| kvm_arm_reset_vcpu(cpu); |
| } |
| #endif |
| |
| hw_breakpoint_update_all(cpu); |
| hw_watchpoint_update_all(cpu); |
| } |
| |
| bool arm_cpu_exec_interrupt(CPUState *cs, int interrupt_request) |
| { |
| CPUClass *cc = CPU_GET_CLASS(cs); |
| CPUARMState *env = cs->env_ptr; |
| uint32_t cur_el = arm_current_el(env); |
| bool secure = arm_is_secure(env); |
| uint32_t target_el; |
| uint32_t excp_idx; |
| bool ret = false; |
| |
| if (interrupt_request & CPU_INTERRUPT_FIQ) { |
| excp_idx = EXCP_FIQ; |
| target_el = arm_phys_excp_target_el(cs, excp_idx, cur_el, secure); |
| if (arm_excp_unmasked(cs, excp_idx, target_el)) { |
| cs->exception_index = excp_idx; |
| env->exception.target_el = target_el; |
| cc->do_interrupt(cs); |
| ret = true; |
| } |
| } |
| if (interrupt_request & CPU_INTERRUPT_HARD) { |
| excp_idx = EXCP_IRQ; |
| target_el = arm_phys_excp_target_el(cs, excp_idx, cur_el, secure); |
| if (arm_excp_unmasked(cs, excp_idx, target_el)) { |
| cs->exception_index = excp_idx; |
| env->exception.target_el = target_el; |
| cc->do_interrupt(cs); |
| ret = true; |
| } |
| } |
| if (interrupt_request & CPU_INTERRUPT_VIRQ) { |
| excp_idx = EXCP_VIRQ; |
| target_el = 1; |
| if (arm_excp_unmasked(cs, excp_idx, target_el)) { |
| cs->exception_index = excp_idx; |
| env->exception.target_el = target_el; |
| cc->do_interrupt(cs); |
| ret = true; |
| } |
| } |
| if (interrupt_request & CPU_INTERRUPT_VFIQ) { |
| excp_idx = EXCP_VFIQ; |
| target_el = 1; |
| if (arm_excp_unmasked(cs, excp_idx, target_el)) { |
| cs->exception_index = excp_idx; |
| env->exception.target_el = target_el; |
| cc->do_interrupt(cs); |
| ret = true; |
| } |
| } |
| |
| return ret; |
| } |
| |
| #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64) |
| static bool arm_v7m_cpu_exec_interrupt(CPUState *cs, int interrupt_request) |
| { |
| CPUClass *cc = CPU_GET_CLASS(cs); |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| bool ret = false; |
| |
| /* ARMv7-M interrupt masking works differently than -A or -R. |
| * There is no FIQ/IRQ distinction. Instead of I and F bits |
| * masking FIQ and IRQ interrupts, an exception is taken only |
| * if it is higher priority than the current execution priority |
| * (which depends on state like BASEPRI, FAULTMASK and the |
| * currently active exception). |
| */ |
| if (interrupt_request & CPU_INTERRUPT_HARD |
| && (armv7m_nvic_can_take_pending_exception(env->nvic))) { |
| cs->exception_index = EXCP_IRQ; |
| cc->do_interrupt(cs); |
| ret = true; |
| } |
| return ret; |
| } |
| #endif |
| |
| #ifndef CONFIG_USER_ONLY |
| static void arm_cpu_set_irq(void *opaque, int irq, int level) |
| { |
| ARMCPU *cpu = opaque; |
| CPUARMState *env = &cpu->env; |
| CPUState *cs = CPU(cpu); |
| static const int mask[] = { |
| [ARM_CPU_IRQ] = CPU_INTERRUPT_HARD, |
| [ARM_CPU_FIQ] = CPU_INTERRUPT_FIQ, |
| [ARM_CPU_VIRQ] = CPU_INTERRUPT_VIRQ, |
| [ARM_CPU_VFIQ] = CPU_INTERRUPT_VFIQ |
| }; |
| |
| switch (irq) { |
| case ARM_CPU_VIRQ: |
| case ARM_CPU_VFIQ: |
| assert(arm_feature(env, ARM_FEATURE_EL2)); |
| /* fall through */ |
| case ARM_CPU_IRQ: |
| case ARM_CPU_FIQ: |
| if (level) { |
| cpu_interrupt(cs, mask[irq]); |
| } else { |
| cpu_reset_interrupt(cs, mask[irq]); |
| } |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| static void arm_cpu_kvm_set_irq(void *opaque, int irq, int level) |
| { |
| #ifdef CONFIG_KVM |
| ARMCPU *cpu = opaque; |
| CPUState *cs = CPU(cpu); |
| int kvm_irq = KVM_ARM_IRQ_TYPE_CPU << KVM_ARM_IRQ_TYPE_SHIFT; |
| |
| switch (irq) { |
| case ARM_CPU_IRQ: |
| kvm_irq |= KVM_ARM_IRQ_CPU_IRQ; |
| break; |
| case ARM_CPU_FIQ: |
| kvm_irq |= KVM_ARM_IRQ_CPU_FIQ; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| kvm_irq |= cs->cpu_index << KVM_ARM_IRQ_VCPU_SHIFT; |
| kvm_set_irq(kvm_state, kvm_irq, level ? 1 : 0); |
| #endif |
| } |
| |
| static bool arm_cpu_virtio_is_big_endian(CPUState *cs) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| |
| cpu_synchronize_state(cs); |
| return arm_cpu_data_is_big_endian(env); |
| } |
| |
| #endif |
| |
| static inline void set_feature(CPUARMState *env, int feature) |
| { |
| env->features |= 1ULL << feature; |
| } |
| |
| static inline void unset_feature(CPUARMState *env, int feature) |
| { |
| env->features &= ~(1ULL << feature); |
| } |
| |
| static int |
| print_insn_thumb1(bfd_vma pc, disassemble_info *info) |
| { |
| return print_insn_arm(pc | 1, info); |
| } |
| |
| static void arm_disas_set_info(CPUState *cpu, disassemble_info *info) |
| { |
| ARMCPU *ac = ARM_CPU(cpu); |
| CPUARMState *env = &ac->env; |
| bool sctlr_b; |
| |
| if (is_a64(env)) { |
| /* We might not be compiled with the A64 disassembler |
| * because it needs a C++ compiler. Leave print_insn |
| * unset in this case to use the caller default behaviour. |
| */ |
| #if defined(CONFIG_ARM_A64_DIS) |
| info->print_insn = print_insn_arm_a64; |
| #endif |
| info->cap_arch = CS_ARCH_ARM64; |
| info->cap_insn_unit = 4; |
| info->cap_insn_split = 4; |
| } else { |
| int cap_mode; |
| if (env->thumb) { |
| info->print_insn = print_insn_thumb1; |
| info->cap_insn_unit = 2; |
| info->cap_insn_split = 4; |
| cap_mode = CS_MODE_THUMB; |
| } else { |
| info->print_insn = print_insn_arm; |
| info->cap_insn_unit = 4; |
| info->cap_insn_split = 4; |
| cap_mode = CS_MODE_ARM; |
| } |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| cap_mode |= CS_MODE_V8; |
| } |
| if (arm_feature(env, ARM_FEATURE_M)) { |
| cap_mode |= CS_MODE_MCLASS; |
| } |
| info->cap_arch = CS_ARCH_ARM; |
| info->cap_mode = cap_mode; |
| } |
| |
| sctlr_b = arm_sctlr_b(env); |
| if (bswap_code(sctlr_b)) { |
| #ifdef TARGET_WORDS_BIGENDIAN |
| info->endian = BFD_ENDIAN_LITTLE; |
| #else |
| info->endian = BFD_ENDIAN_BIG; |
| #endif |
| } |
| info->flags &= ~INSN_ARM_BE32; |
| #ifndef CONFIG_USER_ONLY |
| if (sctlr_b) { |
| info->flags |= INSN_ARM_BE32; |
| } |
| #endif |
| } |
| |
| uint64_t arm_cpu_mp_affinity(int idx, uint8_t clustersz) |
| { |
| uint32_t Aff1 = idx / clustersz; |
| uint32_t Aff0 = idx % clustersz; |
| return (Aff1 << ARM_AFF1_SHIFT) | Aff0; |
| } |
| |
| static void arm_cpu_initfn(Object *obj) |
| { |
| CPUState *cs = CPU(obj); |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cs->env_ptr = &cpu->env; |
| cpu->cp_regs = g_hash_table_new_full(g_int_hash, g_int_equal, |
| g_free, g_free); |
| |
| QLIST_INIT(&cpu->pre_el_change_hooks); |
| QLIST_INIT(&cpu->el_change_hooks); |
| |
| #ifndef CONFIG_USER_ONLY |
| /* Our inbound IRQ and FIQ lines */ |
| if (kvm_enabled()) { |
| /* VIRQ and VFIQ are unused with KVM but we add them to maintain |
| * the same interface as non-KVM CPUs. |
| */ |
| qdev_init_gpio_in(DEVICE(cpu), arm_cpu_kvm_set_irq, 4); |
| } else { |
| qdev_init_gpio_in(DEVICE(cpu), arm_cpu_set_irq, 4); |
| } |
| |
| cpu->gt_timer[GTIMER_PHYS] = timer_new(QEMU_CLOCK_VIRTUAL, GTIMER_SCALE, |
| arm_gt_ptimer_cb, cpu); |
| cpu->gt_timer[GTIMER_VIRT] = timer_new(QEMU_CLOCK_VIRTUAL, GTIMER_SCALE, |
| arm_gt_vtimer_cb, cpu); |
| cpu->gt_timer[GTIMER_HYP] = timer_new(QEMU_CLOCK_VIRTUAL, GTIMER_SCALE, |
| arm_gt_htimer_cb, cpu); |
| cpu->gt_timer[GTIMER_SEC] = timer_new(QEMU_CLOCK_VIRTUAL, GTIMER_SCALE, |
| arm_gt_stimer_cb, cpu); |
| qdev_init_gpio_out(DEVICE(cpu), cpu->gt_timer_outputs, |
| ARRAY_SIZE(cpu->gt_timer_outputs)); |
| |
| qdev_init_gpio_out_named(DEVICE(cpu), &cpu->gicv3_maintenance_interrupt, |
| "gicv3-maintenance-interrupt", 1); |
| qdev_init_gpio_out_named(DEVICE(cpu), &cpu->pmu_interrupt, |
| "pmu-interrupt", 1); |
| #endif |
| |
| /* DTB consumers generally don't in fact care what the 'compatible' |
| * string is, so always provide some string and trust that a hypothetical |
| * picky DTB consumer will also provide a helpful error message. |
| */ |
| cpu->dtb_compatible = "qemu,unknown"; |
| cpu->psci_version = 1; /* By default assume PSCI v0.1 */ |
| cpu->kvm_target = QEMU_KVM_ARM_TARGET_NONE; |
| |
| if (tcg_enabled()) { |
| cpu->psci_version = 2; /* TCG implements PSCI 0.2 */ |
| } |
| } |
| |
| static Property arm_cpu_reset_cbar_property = |
| DEFINE_PROP_UINT64("reset-cbar", ARMCPU, reset_cbar, 0); |
| |
| static Property arm_cpu_reset_hivecs_property = |
| DEFINE_PROP_BOOL("reset-hivecs", ARMCPU, reset_hivecs, false); |
| |
| static Property arm_cpu_rvbar_property = |
| DEFINE_PROP_UINT64("rvbar", ARMCPU, rvbar, 0); |
| |
| static Property arm_cpu_has_el2_property = |
| DEFINE_PROP_BOOL("has_el2", ARMCPU, has_el2, true); |
| |
| static Property arm_cpu_has_el3_property = |
| DEFINE_PROP_BOOL("has_el3", ARMCPU, has_el3, true); |
| |
| static Property arm_cpu_cfgend_property = |
| DEFINE_PROP_BOOL("cfgend", ARMCPU, cfgend, false); |
| |
| /* use property name "pmu" to match other archs and virt tools */ |
| static Property arm_cpu_has_pmu_property = |
| DEFINE_PROP_BOOL("pmu", ARMCPU, has_pmu, true); |
| |
| static Property arm_cpu_has_mpu_property = |
| DEFINE_PROP_BOOL("has-mpu", ARMCPU, has_mpu, true); |
| |
| /* This is like DEFINE_PROP_UINT32 but it doesn't set the default value, |
| * because the CPU initfn will have already set cpu->pmsav7_dregion to |
| * the right value for that particular CPU type, and we don't want |
| * to override that with an incorrect constant value. |
| */ |
| static Property arm_cpu_pmsav7_dregion_property = |
| DEFINE_PROP_UNSIGNED_NODEFAULT("pmsav7-dregion", ARMCPU, |
| pmsav7_dregion, |
| qdev_prop_uint32, uint32_t); |
| |
| /* M profile: initial value of the Secure VTOR */ |
| static Property arm_cpu_initsvtor_property = |
| DEFINE_PROP_UINT32("init-svtor", ARMCPU, init_svtor, 0); |
| |
| static void arm_cpu_post_init(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| /* M profile implies PMSA. We have to do this here rather than |
| * in realize with the other feature-implication checks because |
| * we look at the PMSA bit to see if we should add some properties. |
| */ |
| if (arm_feature(&cpu->env, ARM_FEATURE_M)) { |
| set_feature(&cpu->env, ARM_FEATURE_PMSA); |
| } |
| |
| if (arm_feature(&cpu->env, ARM_FEATURE_CBAR) || |
| arm_feature(&cpu->env, ARM_FEATURE_CBAR_RO)) { |
| qdev_property_add_static(DEVICE(obj), &arm_cpu_reset_cbar_property, |
| &error_abort); |
| } |
| |
| if (!arm_feature(&cpu->env, ARM_FEATURE_M)) { |
| qdev_property_add_static(DEVICE(obj), &arm_cpu_reset_hivecs_property, |
| &error_abort); |
| } |
| |
| if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) { |
| qdev_property_add_static(DEVICE(obj), &arm_cpu_rvbar_property, |
| &error_abort); |
| } |
| |
| if (arm_feature(&cpu->env, ARM_FEATURE_EL3)) { |
| /* Add the has_el3 state CPU property only if EL3 is allowed. This will |
| * prevent "has_el3" from existing on CPUs which cannot support EL3. |
| */ |
| qdev_property_add_static(DEVICE(obj), &arm_cpu_has_el3_property, |
| &error_abort); |
| |
| #ifndef CONFIG_USER_ONLY |
| object_property_add_link(obj, "secure-memory", |
| TYPE_MEMORY_REGION, |
| (Object **)&cpu->secure_memory, |
| qdev_prop_allow_set_link_before_realize, |
| OBJ_PROP_LINK_STRONG, |
| &error_abort); |
| #endif |
| } |
| |
| if (arm_feature(&cpu->env, ARM_FEATURE_EL2)) { |
| qdev_property_add_static(DEVICE(obj), &arm_cpu_has_el2_property, |
| &error_abort); |
| } |
| |
| if (arm_feature(&cpu->env, ARM_FEATURE_PMU)) { |
| qdev_property_add_static(DEVICE(obj), &arm_cpu_has_pmu_property, |
| &error_abort); |
| } |
| |
| if (arm_feature(&cpu->env, ARM_FEATURE_PMSA)) { |
| qdev_property_add_static(DEVICE(obj), &arm_cpu_has_mpu_property, |
| &error_abort); |
| if (arm_feature(&cpu->env, ARM_FEATURE_V7)) { |
| qdev_property_add_static(DEVICE(obj), |
| &arm_cpu_pmsav7_dregion_property, |
| &error_abort); |
| } |
| } |
| |
| if (arm_feature(&cpu->env, ARM_FEATURE_M_SECURITY)) { |
| object_property_add_link(obj, "idau", TYPE_IDAU_INTERFACE, &cpu->idau, |
| qdev_prop_allow_set_link_before_realize, |
| OBJ_PROP_LINK_STRONG, |
| &error_abort); |
| qdev_property_add_static(DEVICE(obj), &arm_cpu_initsvtor_property, |
| &error_abort); |
| } |
| |
| qdev_property_add_static(DEVICE(obj), &arm_cpu_cfgend_property, |
| &error_abort); |
| } |
| |
| static void arm_cpu_finalizefn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| ARMELChangeHook *hook, *next; |
| |
| g_hash_table_destroy(cpu->cp_regs); |
| |
| QLIST_FOREACH_SAFE(hook, &cpu->pre_el_change_hooks, node, next) { |
| QLIST_REMOVE(hook, node); |
| g_free(hook); |
| } |
| QLIST_FOREACH_SAFE(hook, &cpu->el_change_hooks, node, next) { |
| QLIST_REMOVE(hook, node); |
| g_free(hook); |
| } |
| } |
| |
| static void arm_cpu_realizefn(DeviceState *dev, Error **errp) |
| { |
| CPUState *cs = CPU(dev); |
| ARMCPU *cpu = ARM_CPU(dev); |
| ARMCPUClass *acc = ARM_CPU_GET_CLASS(dev); |
| CPUARMState *env = &cpu->env; |
| int pagebits; |
| Error *local_err = NULL; |
| |
| /* If we needed to query the host kernel for the CPU features |
| * then it's possible that might have failed in the initfn, but |
| * this is the first point where we can report it. |
| */ |
| if (cpu->host_cpu_probe_failed) { |
| if (!kvm_enabled()) { |
| error_setg(errp, "The 'host' CPU type can only be used with KVM"); |
| } else { |
| error_setg(errp, "Failed to retrieve host CPU features"); |
| } |
| return; |
| } |
| |
| #ifndef CONFIG_USER_ONLY |
| /* The NVIC and M-profile CPU are two halves of a single piece of |
| * hardware; trying to use one without the other is a command line |
| * error and will result in segfaults if not caught here. |
| */ |
| if (arm_feature(env, ARM_FEATURE_M)) { |
| if (!env->nvic) { |
| error_setg(errp, "This board cannot be used with Cortex-M CPUs"); |
| return; |
| } |
| } else { |
| if (env->nvic) { |
| error_setg(errp, "This board can only be used with Cortex-M CPUs"); |
| return; |
| } |
| } |
| #endif |
| |
| cpu_exec_realizefn(cs, &local_err); |
| if (local_err != NULL) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| |
| /* Some features automatically imply others: */ |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| set_feature(env, ARM_FEATURE_V7); |
| set_feature(env, ARM_FEATURE_ARM_DIV); |
| set_feature(env, ARM_FEATURE_LPAE); |
| } |
| if (arm_feature(env, ARM_FEATURE_V7)) { |
| set_feature(env, ARM_FEATURE_VAPA); |
| set_feature(env, ARM_FEATURE_THUMB2); |
| set_feature(env, ARM_FEATURE_MPIDR); |
| if (!arm_feature(env, ARM_FEATURE_M)) { |
| set_feature(env, ARM_FEATURE_V6K); |
| } else { |
| set_feature(env, ARM_FEATURE_V6); |
| } |
| |
| /* Always define VBAR for V7 CPUs even if it doesn't exist in |
| * non-EL3 configs. This is needed by some legacy boards. |
| */ |
| set_feature(env, ARM_FEATURE_VBAR); |
| } |
| if (arm_feature(env, ARM_FEATURE_V6K)) { |
| set_feature(env, ARM_FEATURE_V6); |
| set_feature(env, ARM_FEATURE_MVFR); |
| } |
| if (arm_feature(env, ARM_FEATURE_V6)) { |
| set_feature(env, ARM_FEATURE_V5); |
| set_feature(env, ARM_FEATURE_JAZELLE); |
| if (!arm_feature(env, ARM_FEATURE_M)) { |
| set_feature(env, ARM_FEATURE_AUXCR); |
| } |
| } |
| if (arm_feature(env, ARM_FEATURE_V5)) { |
| set_feature(env, ARM_FEATURE_V4T); |
| } |
| if (arm_feature(env, ARM_FEATURE_M)) { |
| set_feature(env, ARM_FEATURE_THUMB_DIV); |
| } |
| if (arm_feature(env, ARM_FEATURE_ARM_DIV)) { |
| set_feature(env, ARM_FEATURE_THUMB_DIV); |
| } |
| if (arm_feature(env, ARM_FEATURE_VFP4)) { |
| set_feature(env, ARM_FEATURE_VFP3); |
| set_feature(env, ARM_FEATURE_VFP_FP16); |
| } |
| if (arm_feature(env, ARM_FEATURE_VFP3)) { |
| set_feature(env, ARM_FEATURE_VFP); |
| } |
| if (arm_feature(env, ARM_FEATURE_LPAE)) { |
| set_feature(env, ARM_FEATURE_V7MP); |
| set_feature(env, ARM_FEATURE_PXN); |
| } |
| if (arm_feature(env, ARM_FEATURE_CBAR_RO)) { |
| set_feature(env, ARM_FEATURE_CBAR); |
| } |
| if (arm_feature(env, ARM_FEATURE_THUMB2) && |
| !arm_feature(env, ARM_FEATURE_M)) { |
| set_feature(env, ARM_FEATURE_THUMB_DSP); |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_V7) && |
| !arm_feature(env, ARM_FEATURE_M) && |
| !arm_feature(env, ARM_FEATURE_PMSA)) { |
| /* v7VMSA drops support for the old ARMv5 tiny pages, so we |
| * can use 4K pages. |
| */ |
| pagebits = 12; |
| } else { |
| /* For CPUs which might have tiny 1K pages, or which have an |
| * MPU and might have small region sizes, stick with 1K pages. |
| */ |
| pagebits = 10; |
| } |
| if (!set_preferred_target_page_bits(pagebits)) { |
| /* This can only ever happen for hotplugging a CPU, or if |
| * the board code incorrectly creates a CPU which it has |
| * promised via minimum_page_size that it will not. |
| */ |
| error_setg(errp, "This CPU requires a smaller page size than the " |
| "system is using"); |
| return; |
| } |
| |
| /* This cpu-id-to-MPIDR affinity is used only for TCG; KVM will override it. |
| * We don't support setting cluster ID ([16..23]) (known as Aff2 |
| * in later ARM ARM versions), or any of the higher affinity level fields, |
| * so these bits always RAZ. |
| */ |
| if (cpu->mp_affinity == ARM64_AFFINITY_INVALID) { |
| cpu->mp_affinity = arm_cpu_mp_affinity(cs->cpu_index, |
| ARM_DEFAULT_CPUS_PER_CLUSTER); |
| } |
| |
| if (cpu->reset_hivecs) { |
| cpu->reset_sctlr |= (1 << 13); |
| } |
| |
| if (cpu->cfgend) { |
| if (arm_feature(&cpu->env, ARM_FEATURE_V7)) { |
| cpu->reset_sctlr |= SCTLR_EE; |
| } else { |
| cpu->reset_sctlr |= SCTLR_B; |
| } |
| } |
| |
| if (!cpu->has_el3) { |
| /* If the has_el3 CPU property is disabled then we need to disable the |
| * feature. |
| */ |
| unset_feature(env, ARM_FEATURE_EL3); |
| |
| /* Disable the security extension feature bits in the processor feature |
| * registers as well. These are id_pfr1[7:4] and id_aa64pfr0[15:12]. |
| */ |
| cpu->id_pfr1 &= ~0xf0; |
| cpu->id_aa64pfr0 &= ~0xf000; |
| } |
| |
| if (!cpu->has_el2) { |
| unset_feature(env, ARM_FEATURE_EL2); |
| } |
| |
| if (!cpu->has_pmu) { |
| unset_feature(env, ARM_FEATURE_PMU); |
| cpu->id_aa64dfr0 &= ~0xf00; |
| } |
| |
| if (!arm_feature(env, ARM_FEATURE_EL2)) { |
| /* Disable the hypervisor feature bits in the processor feature |
| * registers if we don't have EL2. These are id_pfr1[15:12] and |
| * id_aa64pfr0_el1[11:8]. |
| */ |
| cpu->id_aa64pfr0 &= ~0xf00; |
| cpu->id_pfr1 &= ~0xf000; |
| } |
| |
| /* MPU can be configured out of a PMSA CPU either by setting has-mpu |
| * to false or by setting pmsav7-dregion to 0. |
| */ |
| if (!cpu->has_mpu) { |
| cpu->pmsav7_dregion = 0; |
| } |
| if (cpu->pmsav7_dregion == 0) { |
| cpu->has_mpu = false; |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_PMSA) && |
| arm_feature(env, ARM_FEATURE_V7)) { |
| uint32_t nr = cpu->pmsav7_dregion; |
| |
| if (nr > 0xff) { |
| error_setg(errp, "PMSAv7 MPU #regions invalid %" PRIu32, nr); |
| return; |
| } |
| |
| if (nr) { |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| /* PMSAv8 */ |
| env->pmsav8.rbar[M_REG_NS] = g_new0(uint32_t, nr); |
| env->pmsav8.rlar[M_REG_NS] = g_new0(uint32_t, nr); |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { |
| env->pmsav8.rbar[M_REG_S] = g_new0(uint32_t, nr); |
| env->pmsav8.rlar[M_REG_S] = g_new0(uint32_t, nr); |
| } |
| } else { |
| env->pmsav7.drbar = g_new0(uint32_t, nr); |
| env->pmsav7.drsr = g_new0(uint32_t, nr); |
| env->pmsav7.dracr = g_new0(uint32_t, nr); |
| } |
| } |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { |
| uint32_t nr = cpu->sau_sregion; |
| |
| if (nr > 0xff) { |
| error_setg(errp, "v8M SAU #regions invalid %" PRIu32, nr); |
| return; |
| } |
| |
| if (nr) { |
| env->sau.rbar = g_new0(uint32_t, nr); |
| env->sau.rlar = g_new0(uint32_t, nr); |
| } |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_EL3)) { |
| set_feature(env, ARM_FEATURE_VBAR); |
| } |
| |
| register_cp_regs_for_features(cpu); |
| arm_cpu_register_gdb_regs_for_features(cpu); |
| |
| init_cpreg_list(cpu); |
| |
| #ifndef CONFIG_USER_ONLY |
| if (cpu->has_el3 || arm_feature(env, ARM_FEATURE_M_SECURITY)) { |
| cs->num_ases = 2; |
| |
| if (!cpu->secure_memory) { |
| cpu->secure_memory = cs->memory; |
| } |
| cpu_address_space_init(cs, ARMASIdx_S, "cpu-secure-memory", |
| cpu->secure_memory); |
| } else { |
| cs->num_ases = 1; |
| } |
| cpu_address_space_init(cs, ARMASIdx_NS, "cpu-memory", cs->memory); |
| |
| /* No core_count specified, default to smp_cpus. */ |
| if (cpu->core_count == -1) { |
| cpu->core_count = smp_cpus; |
| } |
| #endif |
| |
| qemu_init_vcpu(cs); |
| cpu_reset(cs); |
| |
| acc->parent_realize(dev, errp); |
| } |
| |
| static ObjectClass *arm_cpu_class_by_name(const char *cpu_model) |
| { |
| ObjectClass *oc; |
| char *typename; |
| char **cpuname; |
| const char *cpunamestr; |
| |
| cpuname = g_strsplit(cpu_model, ",", 1); |
| cpunamestr = cpuname[0]; |
| #ifdef CONFIG_USER_ONLY |
| /* For backwards compatibility usermode emulation allows "-cpu any", |
| * which has the same semantics as "-cpu max". |
| */ |
| if (!strcmp(cpunamestr, "any")) { |
| cpunamestr = "max"; |
| } |
| #endif |
| typename = g_strdup_printf(ARM_CPU_TYPE_NAME("%s"), cpunamestr); |
| oc = object_class_by_name(typename); |
| g_strfreev(cpuname); |
| g_free(typename); |
| if (!oc || !object_class_dynamic_cast(oc, TYPE_ARM_CPU) || |
| object_class_is_abstract(oc)) { |
| return NULL; |
| } |
| return oc; |
| } |
| |
| /* CPU models. These are not needed for the AArch64 linux-user build. */ |
| #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64) |
| |
| static void arm926_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,arm926"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_VFP); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_TEST_CLEAN); |
| set_feature(&cpu->env, ARM_FEATURE_JAZELLE); |
| cpu->midr = 0x41069265; |
| cpu->reset_fpsid = 0x41011090; |
| cpu->ctr = 0x1dd20d2; |
| cpu->reset_sctlr = 0x00090078; |
| } |
| |
| static void arm946_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,arm946"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_PMSA); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| cpu->midr = 0x41059461; |
| cpu->ctr = 0x0f004006; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void arm1026_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,arm1026"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_VFP); |
| set_feature(&cpu->env, ARM_FEATURE_AUXCR); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_TEST_CLEAN); |
| set_feature(&cpu->env, ARM_FEATURE_JAZELLE); |
| cpu->midr = 0x4106a262; |
| cpu->reset_fpsid = 0x410110a0; |
| cpu->ctr = 0x1dd20d2; |
| cpu->reset_sctlr = 0x00090078; |
| cpu->reset_auxcr = 1; |
| { |
| /* The 1026 had an IFAR at c6,c0,0,1 rather than the ARMv6 c6,c0,0,2 */ |
| ARMCPRegInfo ifar = { |
| .name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.ifar_ns), |
| .resetvalue = 0 |
| }; |
| define_one_arm_cp_reg(cpu, &ifar); |
| } |
| } |
| |
| static void arm1136_r2_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| /* What qemu calls "arm1136_r2" is actually the 1136 r0p2, ie an |
| * older core than plain "arm1136". In particular this does not |
| * have the v6K features. |
| * These ID register values are correct for 1136 but may be wrong |
| * for 1136_r2 (in particular r0p2 does not actually implement most |
| * of the ID registers). |
| */ |
| |
| cpu->dtb_compatible = "arm,arm1136"; |
| set_feature(&cpu->env, ARM_FEATURE_V6); |
| set_feature(&cpu->env, ARM_FEATURE_VFP); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS); |
| cpu->midr = 0x4107b362; |
| cpu->reset_fpsid = 0x410120b4; |
| cpu->mvfr0 = 0x11111111; |
| cpu->mvfr1 = 0x00000000; |
| cpu->ctr = 0x1dd20d2; |
| cpu->reset_sctlr = 0x00050078; |
| cpu->id_pfr0 = 0x111; |
| cpu->id_pfr1 = 0x1; |
| cpu->id_dfr0 = 0x2; |
| cpu->id_afr0 = 0x3; |
| cpu->id_mmfr0 = 0x01130003; |
| cpu->id_mmfr1 = 0x10030302; |
| cpu->id_mmfr2 = 0x01222110; |
| cpu->id_isar0 = 0x00140011; |
| cpu->id_isar1 = 0x12002111; |
| cpu->id_isar2 = 0x11231111; |
| cpu->id_isar3 = 0x01102131; |
| cpu->id_isar4 = 0x141; |
| cpu->reset_auxcr = 7; |
| } |
| |
| static void arm1136_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,arm1136"; |
| set_feature(&cpu->env, ARM_FEATURE_V6K); |
| set_feature(&cpu->env, ARM_FEATURE_V6); |
| set_feature(&cpu->env, ARM_FEATURE_VFP); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS); |
| cpu->midr = 0x4117b363; |
| cpu->reset_fpsid = 0x410120b4; |
| cpu->mvfr0 = 0x11111111; |
| cpu->mvfr1 = 0x00000000; |
| cpu->ctr = 0x1dd20d2; |
| cpu->reset_sctlr = 0x00050078; |
| cpu->id_pfr0 = 0x111; |
| cpu->id_pfr1 = 0x1; |
| cpu->id_dfr0 = 0x2; |
| cpu->id_afr0 = 0x3; |
| cpu->id_mmfr0 = 0x01130003; |
| cpu->id_mmfr1 = 0x10030302; |
| cpu->id_mmfr2 = 0x01222110; |
| cpu->id_isar0 = 0x00140011; |
| cpu->id_isar1 = 0x12002111; |
| cpu->id_isar2 = 0x11231111; |
| cpu->id_isar3 = 0x01102131; |
| cpu->id_isar4 = 0x141; |
| cpu->reset_auxcr = 7; |
| } |
| |
| static void arm1176_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,arm1176"; |
| set_feature(&cpu->env, ARM_FEATURE_V6K); |
| set_feature(&cpu->env, ARM_FEATURE_VFP); |
| set_feature(&cpu->env, ARM_FEATURE_VAPA); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS); |
| set_feature(&cpu->env, ARM_FEATURE_EL3); |
| cpu->midr = 0x410fb767; |
| cpu->reset_fpsid = 0x410120b5; |
| cpu->mvfr0 = 0x11111111; |
| cpu->mvfr1 = 0x00000000; |
| cpu->ctr = 0x1dd20d2; |
| cpu->reset_sctlr = 0x00050078; |
| cpu->id_pfr0 = 0x111; |
| cpu->id_pfr1 = 0x11; |
| cpu->id_dfr0 = 0x33; |
| cpu->id_afr0 = 0; |
| cpu->id_mmfr0 = 0x01130003; |
| cpu->id_mmfr1 = 0x10030302; |
| cpu->id_mmfr2 = 0x01222100; |
| cpu->id_isar0 = 0x0140011; |
| cpu->id_isar1 = 0x12002111; |
| cpu->id_isar2 = 0x11231121; |
| cpu->id_isar3 = 0x01102131; |
| cpu->id_isar4 = 0x01141; |
| cpu->reset_auxcr = 7; |
| } |
| |
| static void arm11mpcore_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,arm11mpcore"; |
| set_feature(&cpu->env, ARM_FEATURE_V6K); |
| set_feature(&cpu->env, ARM_FEATURE_VFP); |
| set_feature(&cpu->env, ARM_FEATURE_VAPA); |
| set_feature(&cpu->env, ARM_FEATURE_MPIDR); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| cpu->midr = 0x410fb022; |
| cpu->reset_fpsid = 0x410120b4; |
| cpu->mvfr0 = 0x11111111; |
| cpu->mvfr1 = 0x00000000; |
| cpu->ctr = 0x1d192992; /* 32K icache 32K dcache */ |
| cpu->id_pfr0 = 0x111; |
| cpu->id_pfr1 = 0x1; |
| cpu->id_dfr0 = 0; |
| cpu->id_afr0 = 0x2; |
| cpu->id_mmfr0 = 0x01100103; |
| cpu->id_mmfr1 = 0x10020302; |
| cpu->id_mmfr2 = 0x01222000; |
| cpu->id_isar0 = 0x00100011; |
| cpu->id_isar1 = 0x12002111; |
| cpu->id_isar2 = 0x11221011; |
| cpu->id_isar3 = 0x01102131; |
| cpu->id_isar4 = 0x141; |
| cpu->reset_auxcr = 1; |
| } |
| |
| static void cortex_m3_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_M); |
| set_feature(&cpu->env, ARM_FEATURE_M_MAIN); |
| cpu->midr = 0x410fc231; |
| cpu->pmsav7_dregion = 8; |
| cpu->id_pfr0 = 0x00000030; |
| cpu->id_pfr1 = 0x00000200; |
| cpu->id_dfr0 = 0x00100000; |
| cpu->id_afr0 = 0x00000000; |
| cpu->id_mmfr0 = 0x00000030; |
| cpu->id_mmfr1 = 0x00000000; |
| cpu->id_mmfr2 = 0x00000000; |
| cpu->id_mmfr3 = 0x00000000; |
| cpu->id_isar0 = 0x01141110; |
| cpu->id_isar1 = 0x02111000; |
| cpu->id_isar2 = 0x21112231; |
| cpu->id_isar3 = 0x01111110; |
| cpu->id_isar4 = 0x01310102; |
| cpu->id_isar5 = 0x00000000; |
| } |
| |
| static void cortex_m4_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_M); |
| set_feature(&cpu->env, ARM_FEATURE_M_MAIN); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); |
| cpu->midr = 0x410fc240; /* r0p0 */ |
| cpu->pmsav7_dregion = 8; |
| cpu->id_pfr0 = 0x00000030; |
| cpu->id_pfr1 = 0x00000200; |
| cpu->id_dfr0 = 0x00100000; |
| cpu->id_afr0 = 0x00000000; |
| cpu->id_mmfr0 = 0x00000030; |
| cpu->id_mmfr1 = 0x00000000; |
| cpu->id_mmfr2 = 0x00000000; |
| cpu->id_mmfr3 = 0x00000000; |
| cpu->id_isar0 = 0x01141110; |
| cpu->id_isar1 = 0x02111000; |
| cpu->id_isar2 = 0x21112231; |
| cpu->id_isar3 = 0x01111110; |
| cpu->id_isar4 = 0x01310102; |
| cpu->id_isar5 = 0x00000000; |
| } |
| |
| static void cortex_m33_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| set_feature(&cpu->env, ARM_FEATURE_V8); |
| set_feature(&cpu->env, ARM_FEATURE_M); |
| set_feature(&cpu->env, ARM_FEATURE_M_MAIN); |
| set_feature(&cpu->env, ARM_FEATURE_M_SECURITY); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB_DSP); |
| cpu->midr = 0x410fd213; /* r0p3 */ |
| cpu->pmsav7_dregion = 16; |
| cpu->sau_sregion = 8; |
| cpu->id_pfr0 = 0x00000030; |
| cpu->id_pfr1 = 0x00000210; |
| cpu->id_dfr0 = 0x00200000; |
| cpu->id_afr0 = 0x00000000; |
| cpu->id_mmfr0 = 0x00101F40; |
| cpu->id_mmfr1 = 0x00000000; |
| cpu->id_mmfr2 = 0x01000000; |
| cpu->id_mmfr3 = 0x00000000; |
| cpu->id_isar0 = 0x01101110; |
| cpu->id_isar1 = 0x02212000; |
| cpu->id_isar2 = 0x20232232; |
| cpu->id_isar3 = 0x01111131; |
| cpu->id_isar4 = 0x01310132; |
| cpu->id_isar5 = 0x00000000; |
| cpu->clidr = 0x00000000; |
| cpu->ctr = 0x8000c000; |
| } |
| |
| static void arm_v7m_class_init(ObjectClass *oc, void *data) |
| { |
| CPUClass *cc = CPU_CLASS(oc); |
| |
| #ifndef CONFIG_USER_ONLY |
| cc->do_interrupt = arm_v7m_cpu_do_interrupt; |
| #endif |
| |
| cc->cpu_exec_interrupt = arm_v7m_cpu_exec_interrupt; |
| } |
| |
| static const ARMCPRegInfo cortexr5_cp_reginfo[] = { |
| /* Dummy the TCM region regs for the moment */ |
| { .name = "ATCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0, |
| .access = PL1_RW, .type = ARM_CP_CONST }, |
| { .name = "BTCM", .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 1, |
| .access = PL1_RW, .type = ARM_CP_CONST }, |
| { .name = "DCACHE_INVAL", .cp = 15, .opc1 = 0, .crn = 15, .crm = 5, |
| .opc2 = 0, .access = PL1_W, .type = ARM_CP_NOP }, |
| REGINFO_SENTINEL |
| }; |
| |
| static void cortex_r5_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB_DIV); |
| set_feature(&cpu->env, ARM_FEATURE_ARM_DIV); |
| set_feature(&cpu->env, ARM_FEATURE_V7MP); |
| set_feature(&cpu->env, ARM_FEATURE_PMSA); |
| cpu->midr = 0x411fc153; /* r1p3 */ |
| cpu->id_pfr0 = 0x0131; |
| cpu->id_pfr1 = 0x001; |
| cpu->id_dfr0 = 0x010400; |
| cpu->id_afr0 = 0x0; |
| cpu->id_mmfr0 = 0x0210030; |
| cpu->id_mmfr1 = 0x00000000; |
| cpu->id_mmfr2 = 0x01200000; |
| cpu->id_mmfr3 = 0x0211; |
| cpu->id_isar0 = 0x2101111; |
| cpu->id_isar1 = 0x13112111; |
| cpu->id_isar2 = 0x21232141; |
| cpu->id_isar3 = 0x01112131; |
| cpu->id_isar4 = 0x0010142; |
| cpu->id_isar5 = 0x0; |
| cpu->mp_is_up = true; |
| cpu->pmsav7_dregion = 16; |
| define_arm_cp_regs(cpu, cortexr5_cp_reginfo); |
| } |
| |
| static void cortex_r5f_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cortex_r5_initfn(obj); |
| set_feature(&cpu->env, ARM_FEATURE_VFP3); |
| } |
| |
| static const ARMCPRegInfo cortexa8_cp_reginfo[] = { |
| { .name = "L2LOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 0, |
| .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "L2AUXCR", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 2, |
| .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| |
| static void cortex_a8_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,cortex-a8"; |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_VFP3); |
| set_feature(&cpu->env, ARM_FEATURE_NEON); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_EL3); |
| cpu->midr = 0x410fc080; |
| cpu->reset_fpsid = 0x410330c0; |
| cpu->mvfr0 = 0x11110222; |
| cpu->mvfr1 = 0x00011111; |
| cpu->ctr = 0x82048004; |
| cpu->reset_sctlr = 0x00c50078; |
| cpu->id_pfr0 = 0x1031; |
| cpu->id_pfr1 = 0x11; |
| cpu->id_dfr0 = 0x400; |
| cpu->id_afr0 = 0; |
| cpu->id_mmfr0 = 0x31100003; |
| cpu->id_mmfr1 = 0x20000000; |
| cpu->id_mmfr2 = 0x01202000; |
| cpu->id_mmfr3 = 0x11; |
| cpu->id_isar0 = 0x00101111; |
| cpu->id_isar1 = 0x12112111; |
| cpu->id_isar2 = 0x21232031; |
| cpu->id_isar3 = 0x11112131; |
| cpu->id_isar4 = 0x00111142; |
| cpu->dbgdidr = 0x15141000; |
| cpu->clidr = (1 << 27) | (2 << 24) | 3; |
| cpu->ccsidr[0] = 0xe007e01a; /* 16k L1 dcache. */ |
| cpu->ccsidr[1] = 0x2007e01a; /* 16k L1 icache. */ |
| cpu->ccsidr[2] = 0xf0000000; /* No L2 icache. */ |
| cpu->reset_auxcr = 2; |
| define_arm_cp_regs(cpu, cortexa8_cp_reginfo); |
| } |
| |
| static const ARMCPRegInfo cortexa9_cp_reginfo[] = { |
| /* power_control should be set to maximum latency. Again, |
| * default to 0 and set by private hook |
| */ |
| { .name = "A9_PWRCTL", .cp = 15, .crn = 15, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_power_control) }, |
| { .name = "A9_DIAG", .cp = 15, .crn = 15, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_diagnostic) }, |
| { .name = "A9_PWRDIAG", .cp = 15, .crn = 15, .crm = 0, .opc1 = 0, .opc2 = 2, |
| .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_power_diagnostic) }, |
| { .name = "NEONBUSY", .cp = 15, .crn = 15, .crm = 1, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST }, |
| /* TLB lockdown control */ |
| { .name = "TLB_LOCKR", .cp = 15, .crn = 15, .crm = 4, .opc1 = 5, .opc2 = 2, |
| .access = PL1_W, .resetvalue = 0, .type = ARM_CP_NOP }, |
| { .name = "TLB_LOCKW", .cp = 15, .crn = 15, .crm = 4, .opc1 = 5, .opc2 = 4, |
| .access = PL1_W, .resetvalue = 0, .type = ARM_CP_NOP }, |
| { .name = "TLB_VA", .cp = 15, .crn = 15, .crm = 5, .opc1 = 5, .opc2 = 2, |
| .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST }, |
| { .name = "TLB_PA", .cp = 15, .crn = 15, .crm = 6, .opc1 = 5, .opc2 = 2, |
| .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST }, |
| { .name = "TLB_ATTR", .cp = 15, .crn = 15, .crm = 7, .opc1 = 5, .opc2 = 2, |
| .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST }, |
| REGINFO_SENTINEL |
| }; |
| |
| static void cortex_a9_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,cortex-a9"; |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_VFP3); |
| set_feature(&cpu->env, ARM_FEATURE_VFP_FP16); |
| set_feature(&cpu->env, ARM_FEATURE_NEON); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); |
| set_feature(&cpu->env, ARM_FEATURE_EL3); |
| /* Note that A9 supports the MP extensions even for |
| * A9UP and single-core A9MP (which are both different |
| * and valid configurations; we don't model A9UP). |
| */ |
| set_feature(&cpu->env, ARM_FEATURE_V7MP); |
| set_feature(&cpu->env, ARM_FEATURE_CBAR); |
| cpu->midr = 0x410fc090; |
| cpu->reset_fpsid = 0x41033090; |
| cpu->mvfr0 = 0x11110222; |
| cpu->mvfr1 = 0x01111111; |
| cpu->ctr = 0x80038003; |
| cpu->reset_sctlr = 0x00c50078; |
| cpu->id_pfr0 = 0x1031; |
| cpu->id_pfr1 = 0x11; |
| cpu->id_dfr0 = 0x000; |
| cpu->id_afr0 = 0; |
| cpu->id_mmfr0 = 0x00100103; |
| cpu->id_mmfr1 = 0x20000000; |
| cpu->id_mmfr2 = 0x01230000; |
| cpu->id_mmfr3 = 0x00002111; |
| cpu->id_isar0 = 0x00101111; |
| cpu->id_isar1 = 0x13112111; |
| cpu->id_isar2 = 0x21232041; |
| cpu->id_isar3 = 0x11112131; |
| cpu->id_isar4 = 0x00111142; |
| cpu->dbgdidr = 0x35141000; |
| cpu->clidr = (1 << 27) | (1 << 24) | 3; |
| cpu->ccsidr[0] = 0xe00fe019; /* 16k L1 dcache. */ |
| cpu->ccsidr[1] = 0x200fe019; /* 16k L1 icache. */ |
| define_arm_cp_regs(cpu, cortexa9_cp_reginfo); |
| } |
| |
| #ifndef CONFIG_USER_ONLY |
| static uint64_t a15_l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| /* Linux wants the number of processors from here. |
| * Might as well set the interrupt-controller bit too. |
| */ |
| return ((smp_cpus - 1) << 24) | (1 << 23); |
| } |
| #endif |
| |
| static const ARMCPRegInfo cortexa15_cp_reginfo[] = { |
| #ifndef CONFIG_USER_ONLY |
| { .name = "L2CTLR", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 2, |
| .access = PL1_RW, .resetvalue = 0, .readfn = a15_l2ctlr_read, |
| .writefn = arm_cp_write_ignore, }, |
| #endif |
| { .name = "L2ECTLR", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 3, |
| .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| |
| static void cortex_a7_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,cortex-a7"; |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_VFP4); |
| set_feature(&cpu->env, ARM_FEATURE_NEON); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); |
| set_feature(&cpu->env, ARM_FEATURE_ARM_DIV); |
| set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); |
| set_feature(&cpu->env, ARM_FEATURE_LPAE); |
| set_feature(&cpu->env, ARM_FEATURE_EL3); |
| cpu->kvm_target = QEMU_KVM_ARM_TARGET_CORTEX_A7; |
| cpu->midr = 0x410fc075; |
| cpu->reset_fpsid = 0x41023075; |
| cpu->mvfr0 = 0x10110222; |
| cpu->mvfr1 = 0x11111111; |
| cpu->ctr = 0x84448003; |
| cpu->reset_sctlr = 0x00c50078; |
| cpu->id_pfr0 = 0x00001131; |
| cpu->id_pfr1 = 0x00011011; |
| cpu->id_dfr0 = 0x02010555; |
| cpu->pmceid0 = 0x00000000; |
| cpu->pmceid1 = 0x00000000; |
| cpu->id_afr0 = 0x00000000; |
| cpu->id_mmfr0 = 0x10101105; |
| cpu->id_mmfr1 = 0x40000000; |
| cpu->id_mmfr2 = 0x01240000; |
| cpu->id_mmfr3 = 0x02102211; |
| cpu->id_isar0 = 0x01101110; |
| cpu->id_isar1 = 0x13112111; |
| cpu->id_isar2 = 0x21232041; |
| cpu->id_isar3 = 0x11112131; |
| cpu->id_isar4 = 0x10011142; |
| cpu->dbgdidr = 0x3515f005; |
| cpu->clidr = 0x0a200023; |
| cpu->ccsidr[0] = 0x701fe00a; /* 32K L1 dcache */ |
| cpu->ccsidr[1] = 0x201fe00a; /* 32K L1 icache */ |
| cpu->ccsidr[2] = 0x711fe07a; /* 4096K L2 unified cache */ |
| define_arm_cp_regs(cpu, cortexa15_cp_reginfo); /* Same as A15 */ |
| } |
| |
| static void cortex_a15_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "arm,cortex-a15"; |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_VFP4); |
| set_feature(&cpu->env, ARM_FEATURE_NEON); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); |
| set_feature(&cpu->env, ARM_FEATURE_ARM_DIV); |
| set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CBAR_RO); |
| set_feature(&cpu->env, ARM_FEATURE_LPAE); |
| set_feature(&cpu->env, ARM_FEATURE_EL3); |
| cpu->kvm_target = QEMU_KVM_ARM_TARGET_CORTEX_A15; |
| cpu->midr = 0x412fc0f1; |
| cpu->reset_fpsid = 0x410430f0; |
| cpu->mvfr0 = 0x10110222; |
| cpu->mvfr1 = 0x11111111; |
| cpu->ctr = 0x8444c004; |
| cpu->reset_sctlr = 0x00c50078; |
| cpu->id_pfr0 = 0x00001131; |
| cpu->id_pfr1 = 0x00011011; |
| cpu->id_dfr0 = 0x02010555; |
| cpu->pmceid0 = 0x0000000; |
| cpu->pmceid1 = 0x00000000; |
| cpu->id_afr0 = 0x00000000; |
| cpu->id_mmfr0 = 0x10201105; |
| cpu->id_mmfr1 = 0x20000000; |
| cpu->id_mmfr2 = 0x01240000; |
| cpu->id_mmfr3 = 0x02102211; |
| cpu->id_isar0 = 0x02101110; |
| cpu->id_isar1 = 0x13112111; |
| cpu->id_isar2 = 0x21232041; |
| cpu->id_isar3 = 0x11112131; |
| cpu->id_isar4 = 0x10011142; |
| cpu->dbgdidr = 0x3515f021; |
| cpu->clidr = 0x0a200023; |
| cpu->ccsidr[0] = 0x701fe00a; /* 32K L1 dcache */ |
| cpu->ccsidr[1] = 0x201fe00a; /* 32K L1 icache */ |
| cpu->ccsidr[2] = 0x711fe07a; /* 4096K L2 unified cache */ |
| define_arm_cp_regs(cpu, cortexa15_cp_reginfo); |
| } |
| |
| static void ti925t_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V4T); |
| set_feature(&cpu->env, ARM_FEATURE_OMAPCP); |
| cpu->midr = ARM_CPUID_TI925T; |
| cpu->ctr = 0x5109149; |
| cpu->reset_sctlr = 0x00000070; |
| } |
| |
| static void sa1100_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "intel,sa1100"; |
| set_feature(&cpu->env, ARM_FEATURE_STRONGARM); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| cpu->midr = 0x4401A11B; |
| cpu->reset_sctlr = 0x00000070; |
| } |
| |
| static void sa1110_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_STRONGARM); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| cpu->midr = 0x6901B119; |
| cpu->reset_sctlr = 0x00000070; |
| } |
| |
| static void pxa250_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| cpu->midr = 0x69052100; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa255_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| cpu->midr = 0x69052d00; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa260_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| cpu->midr = 0x69052903; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa261_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| cpu->midr = 0x69052d05; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa262_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| cpu->midr = 0x69052d06; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270a0_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = 0x69054110; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270a1_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = 0x69054111; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270b0_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = 0x69054112; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270b1_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = 0x69054113; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270c0_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = 0x69054114; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270c5_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu->dtb_compatible = "marvell,xscale"; |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = 0x69054117; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| #ifndef TARGET_AARCH64 |
| /* -cpu max: if KVM is enabled, like -cpu host (best possible with this host); |
| * otherwise, a CPU with as many features enabled as our emulation supports. |
| * The version of '-cpu max' for qemu-system-aarch64 is defined in cpu64.c; |
| * this only needs to handle 32 bits. |
| */ |
| static void arm_max_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| if (kvm_enabled()) { |
| kvm_arm_set_cpu_features_from_host(cpu); |
| } else { |
| cortex_a15_initfn(obj); |
| #ifdef CONFIG_USER_ONLY |
| /* We don't set these in system emulation mode for the moment, |
| * since we don't correctly set the ID registers to advertise them, |
| */ |
| set_feature(&cpu->env, ARM_FEATURE_V8); |
| set_feature(&cpu->env, ARM_FEATURE_VFP4); |
| set_feature(&cpu->env, ARM_FEATURE_NEON); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); |
| set_feature(&cpu->env, ARM_FEATURE_V8_AES); |
| set_feature(&cpu->env, ARM_FEATURE_V8_SHA1); |
| set_feature(&cpu->env, ARM_FEATURE_V8_SHA256); |
| set_feature(&cpu->env, ARM_FEATURE_V8_PMULL); |
| set_feature(&cpu->env, ARM_FEATURE_CRC); |
| set_feature(&cpu->env, ARM_FEATURE_V8_RDM); |
| set_feature(&cpu->env, ARM_FEATURE_V8_FCMA); |
| #endif |
| } |
| } |
| #endif |
| |
| #endif /* !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64) */ |
| |
| typedef struct ARMCPUInfo { |
| const char *name; |
| void (*initfn)(Object *obj); |
| void (*class_init)(ObjectClass *oc, void *data); |
| } ARMCPUInfo; |
| |
| static const ARMCPUInfo arm_cpus[] = { |
| #if !defined(CONFIG_USER_ONLY) || !defined(TARGET_AARCH64) |
| { .name = "arm926", .initfn = arm926_initfn }, |
| { .name = "arm946", .initfn = arm946_initfn }, |
| { .name = "arm1026", .initfn = arm1026_initfn }, |
| /* What QEMU calls "arm1136-r2" is actually the 1136 r0p2, i.e. an |
| * older core than plain "arm1136". In particular this does not |
| * have the v6K features. |
| */ |
| { .name = "arm1136-r2", .initfn = arm1136_r2_initfn }, |
| { .name = "arm1136", .initfn = arm1136_initfn }, |
| { .name = "arm1176", .initfn = arm1176_initfn }, |
| { .name = "arm11mpcore", .initfn = arm11mpcore_initfn }, |
| { .name = "cortex-m3", .initfn = cortex_m3_initfn, |
| .class_init = arm_v7m_class_init }, |
| { .name = "cortex-m4", .initfn = cortex_m4_initfn, |
| .class_init = arm_v7m_class_init }, |
| { .name = "cortex-m33", .initfn = cortex_m33_initfn, |
| .class_init = arm_v7m_class_init }, |
| { .name = "cortex-r5", .initfn = cortex_r5_initfn }, |
| { .name = "cortex-r5f", .initfn = cortex_r5f_initfn }, |
| { .name = "cortex-a7", .initfn = cortex_a7_initfn }, |
| { .name = "cortex-a8", .initfn = cortex_a8_initfn }, |
| { .name = "cortex-a9", .initfn = cortex_a9_initfn }, |
| { .name = "cortex-a15", .initfn = cortex_a15_initfn }, |
| { .name = "ti925t", .initfn = ti925t_initfn }, |
| { .name = "sa1100", .initfn = sa1100_initfn }, |
| { .name = "sa1110", .initfn = sa1110_initfn }, |
| { .name = "pxa250", .initfn = pxa250_initfn }, |
| { .name = "pxa255", .initfn = pxa255_initfn }, |
| { .name = "pxa260", .initfn = pxa260_initfn }, |
| { .name = "pxa261", .initfn = pxa261_initfn }, |
| { .name = "pxa262", .initfn = pxa262_initfn }, |
| /* "pxa270" is an alias for "pxa270-a0" */ |
| { .name = "pxa270", .initfn = pxa270a0_initfn }, |
| { .name = "pxa270-a0", .initfn = pxa270a0_initfn }, |
| { .name = "pxa270-a1", .initfn = pxa270a1_initfn }, |
| { .name = "pxa270-b0", .initfn = pxa270b0_initfn }, |
| { .name = "pxa270-b1", .initfn = pxa270b1_initfn }, |
| { .name = "pxa270-c0", .initfn = pxa270c0_initfn }, |
| { .name = "pxa270-c5", .initfn = pxa270c5_initfn }, |
| #ifndef TARGET_AARCH64 |
| { .name = "max", .initfn = arm_max_initfn }, |
| #endif |
| #ifdef CONFIG_USER_ONLY |
| { .name = "any", .initfn = arm_max_initfn }, |
| #endif |
| #endif |
| { .name = NULL } |
| }; |
| |
| static Property arm_cpu_properties[] = { |
| DEFINE_PROP_BOOL("start-powered-off", ARMCPU, start_powered_off, false), |
| DEFINE_PROP_UINT32("psci-conduit", ARMCPU, psci_conduit, 0), |
| DEFINE_PROP_UINT32("midr", ARMCPU, midr, 0), |
| DEFINE_PROP_UINT64("mp-affinity", ARMCPU, |
| mp_affinity, ARM64_AFFINITY_INVALID), |
| DEFINE_PROP_INT32("node-id", ARMCPU, node_id, CPU_UNSET_NUMA_NODE_ID), |
| DEFINE_PROP_INT32("core-count", ARMCPU, core_count, -1), |
| DEFINE_PROP_END_OF_LIST() |
| }; |
| |
| #ifdef CONFIG_USER_ONLY |
| static int arm_cpu_handle_mmu_fault(CPUState *cs, vaddr address, int size, |
| int rw, int mmu_idx) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| |
| env->exception.vaddress = address; |
| if (rw == 2) { |
| cs->exception_index = EXCP_PREFETCH_ABORT; |
| } else { |
| cs->exception_index = EXCP_DATA_ABORT; |
| } |
| return 1; |
| } |
| #endif |
| |
| static gchar *arm_gdb_arch_name(CPUState *cs) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| |
| if (arm_feature(env, ARM_FEATURE_IWMMXT)) { |
| return g_strdup("iwmmxt"); |
| } |
| return g_strdup("arm"); |
| } |
| |
| static void arm_cpu_class_init(ObjectClass *oc, void *data) |
| { |
| ARMCPUClass *acc = ARM_CPU_CLASS(oc); |
| CPUClass *cc = CPU_CLASS(acc); |
| DeviceClass *dc = DEVICE_CLASS(oc); |
| |
| device_class_set_parent_realize(dc, arm_cpu_realizefn, |
| &acc->parent_realize); |
| dc->props = arm_cpu_properties; |
| |
| acc->parent_reset = cc->reset; |
| cc->reset = arm_cpu_reset; |
| |
| cc->class_by_name = arm_cpu_class_by_name; |
| cc->has_work = arm_cpu_has_work; |
| cc->cpu_exec_interrupt = arm_cpu_exec_interrupt; |
| cc->dump_state = arm_cpu_dump_state; |
| cc->set_pc = arm_cpu_set_pc; |
| cc->gdb_read_register = arm_cpu_gdb_read_register; |
| cc->gdb_write_register = arm_cpu_gdb_write_register; |
| #ifdef CONFIG_USER_ONLY |
| cc->handle_mmu_fault = arm_cpu_handle_mmu_fault; |
| #else |
| cc->do_interrupt = arm_cpu_do_interrupt; |
| cc->do_unaligned_access = arm_cpu_do_unaligned_access; |
| cc->do_transaction_failed = arm_cpu_do_transaction_failed; |
| cc->get_phys_page_attrs_debug = arm_cpu_get_phys_page_attrs_debug; |
| cc->asidx_from_attrs = arm_asidx_from_attrs; |
| cc->vmsd = &vmstate_arm_cpu; |
| cc->virtio_is_big_endian = arm_cpu_virtio_is_big_endian; |
| cc->write_elf64_note = arm_cpu_write_elf64_note; |
| cc->write_elf32_note = arm_cpu_write_elf32_note; |
| #endif |
| cc->gdb_num_core_regs = 26; |
| cc->gdb_core_xml_file = "arm-core.xml"; |
| cc->gdb_arch_name = arm_gdb_arch_name; |
| cc->gdb_get_dynamic_xml = arm_gdb_get_dynamic_xml; |
| cc->gdb_stop_before_watchpoint = true; |
| cc->debug_excp_handler = arm_debug_excp_handler; |
| cc->debug_check_watchpoint = arm_debug_check_watchpoint; |
| #if !defined(CONFIG_USER_ONLY) |
| cc->adjust_watchpoint_address = arm_adjust_watchpoint_address; |
| #endif |
| |
| cc->disas_set_info = arm_disas_set_info; |
| #ifdef CONFIG_TCG |
| cc->tcg_initialize = arm_translate_init; |
| #endif |
| } |
| |
| #ifdef CONFIG_KVM |
| static void arm_host_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| kvm_arm_set_cpu_features_from_host(cpu); |
| } |
| |
| static const TypeInfo host_arm_cpu_type_info = { |
| .name = TYPE_ARM_HOST_CPU, |
| #ifdef TARGET_AARCH64 |
| .parent = TYPE_AARCH64_CPU, |
| #else |
| .parent = TYPE_ARM_CPU, |
| #endif |
| .instance_init = arm_host_initfn, |
| }; |
| |
| #endif |
| |
| static void cpu_register(const ARMCPUInfo *info) |
| { |
| TypeInfo type_info = { |
| .parent = TYPE_ARM_CPU, |
| .instance_size = sizeof(ARMCPU), |
| .instance_init = info->initfn, |
| .class_size = sizeof(ARMCPUClass), |
| .class_init = info->class_init, |
| }; |
| |
| type_info.name = g_strdup_printf("%s-" TYPE_ARM_CPU, info->name); |
| type_register(&type_info); |
| g_free((void *)type_info.name); |
| } |
| |
| static const TypeInfo arm_cpu_type_info = { |
| .name = TYPE_ARM_CPU, |
| .parent = TYPE_CPU, |
| .instance_size = sizeof(ARMCPU), |
| .instance_init = arm_cpu_initfn, |
| .instance_post_init = arm_cpu_post_init, |
| .instance_finalize = arm_cpu_finalizefn, |
| .abstract = true, |
| .class_size = sizeof(ARMCPUClass), |
| .class_init = arm_cpu_class_init, |
| }; |
| |
| static const TypeInfo idau_interface_type_info = { |
| .name = TYPE_IDAU_INTERFACE, |
| .parent = TYPE_INTERFACE, |
| .class_size = sizeof(IDAUInterfaceClass), |
| }; |
| |
| static void arm_cpu_register_types(void) |
| { |
| const ARMCPUInfo *info = arm_cpus; |
| |
| type_register_static(&arm_cpu_type_info); |
| type_register_static(&idau_interface_type_info); |
| |
| while (info->name) { |
| cpu_register(info); |
| info++; |
| } |
| |
| #ifdef CONFIG_KVM |
| type_register_static(&host_arm_cpu_type_info); |
| #endif |
| } |
| |
| type_init(arm_cpu_register_types) |