| /* |
| * Copyright (c) 2018 Intel Corporation |
| * Copyright (c) 2019 Red Hat, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2 or later, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/error-report.h" |
| #include "qemu/cutils.h" |
| #include "qemu/units.h" |
| #include "qapi/error.h" |
| #include "qapi/visitor.h" |
| #include "qapi/qapi-visit-common.h" |
| #include "sysemu/sysemu.h" |
| #include "sysemu/cpus.h" |
| #include "sysemu/numa.h" |
| #include "sysemu/reset.h" |
| #include "sysemu/runstate.h" |
| #include "acpi-microvm.h" |
| #include "microvm-dt.h" |
| |
| #include "hw/loader.h" |
| #include "hw/irq.h" |
| #include "hw/i386/kvm/clock.h" |
| #include "hw/i386/microvm.h" |
| #include "hw/i386/x86.h" |
| #include "target/i386/cpu.h" |
| #include "hw/intc/i8259.h" |
| #include "hw/timer/i8254.h" |
| #include "hw/rtc/mc146818rtc.h" |
| #include "hw/char/serial.h" |
| #include "hw/display/ramfb.h" |
| #include "hw/i386/topology.h" |
| #include "hw/i386/e820_memory_layout.h" |
| #include "hw/i386/fw_cfg.h" |
| #include "hw/virtio/virtio-mmio.h" |
| #include "hw/acpi/acpi.h" |
| #include "hw/acpi/generic_event_device.h" |
| #include "hw/pci-host/gpex.h" |
| #include "hw/usb/xhci.h" |
| |
| #include "elf.h" |
| #include "kvm/kvm_i386.h" |
| #include "hw/xen/start_info.h" |
| |
| #define MICROVM_QBOOT_FILENAME "qboot.rom" |
| #define MICROVM_BIOS_FILENAME "bios-microvm.bin" |
| |
| static void microvm_set_rtc(MicrovmMachineState *mms, MC146818RtcState *s) |
| { |
| X86MachineState *x86ms = X86_MACHINE(mms); |
| int val; |
| |
| val = MIN(x86ms->below_4g_mem_size / KiB, 640); |
| mc146818rtc_set_cmos_data(s, 0x15, val); |
| mc146818rtc_set_cmos_data(s, 0x16, val >> 8); |
| /* extended memory (next 64MiB) */ |
| if (x86ms->below_4g_mem_size > 1 * MiB) { |
| val = (x86ms->below_4g_mem_size - 1 * MiB) / KiB; |
| } else { |
| val = 0; |
| } |
| if (val > 65535) { |
| val = 65535; |
| } |
| mc146818rtc_set_cmos_data(s, 0x17, val); |
| mc146818rtc_set_cmos_data(s, 0x18, val >> 8); |
| mc146818rtc_set_cmos_data(s, 0x30, val); |
| mc146818rtc_set_cmos_data(s, 0x31, val >> 8); |
| /* memory between 16MiB and 4GiB */ |
| if (x86ms->below_4g_mem_size > 16 * MiB) { |
| val = (x86ms->below_4g_mem_size - 16 * MiB) / (64 * KiB); |
| } else { |
| val = 0; |
| } |
| if (val > 65535) { |
| val = 65535; |
| } |
| mc146818rtc_set_cmos_data(s, 0x34, val); |
| mc146818rtc_set_cmos_data(s, 0x35, val >> 8); |
| /* memory above 4GiB */ |
| val = x86ms->above_4g_mem_size / 65536; |
| mc146818rtc_set_cmos_data(s, 0x5b, val); |
| mc146818rtc_set_cmos_data(s, 0x5c, val >> 8); |
| mc146818rtc_set_cmos_data(s, 0x5d, val >> 16); |
| } |
| |
| static void create_gpex(MicrovmMachineState *mms) |
| { |
| X86MachineState *x86ms = X86_MACHINE(mms); |
| MemoryRegion *mmio32_alias; |
| MemoryRegion *mmio64_alias; |
| MemoryRegion *mmio_reg; |
| MemoryRegion *ecam_alias; |
| MemoryRegion *ecam_reg; |
| DeviceState *dev; |
| int i; |
| |
| dev = qdev_new(TYPE_GPEX_HOST); |
| sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); |
| |
| /* Map only the first size_ecam bytes of ECAM space */ |
| ecam_alias = g_new0(MemoryRegion, 1); |
| ecam_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0); |
| memory_region_init_alias(ecam_alias, OBJECT(dev), "pcie-ecam", |
| ecam_reg, 0, mms->gpex.ecam.size); |
| memory_region_add_subregion(get_system_memory(), |
| mms->gpex.ecam.base, ecam_alias); |
| |
| /* Map the MMIO window into system address space so as to expose |
| * the section of PCI MMIO space which starts at the same base address |
| * (ie 1:1 mapping for that part of PCI MMIO space visible through |
| * the window). |
| */ |
| mmio_reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1); |
| if (mms->gpex.mmio32.size) { |
| mmio32_alias = g_new0(MemoryRegion, 1); |
| memory_region_init_alias(mmio32_alias, OBJECT(dev), "pcie-mmio32", mmio_reg, |
| mms->gpex.mmio32.base, mms->gpex.mmio32.size); |
| memory_region_add_subregion(get_system_memory(), |
| mms->gpex.mmio32.base, mmio32_alias); |
| } |
| if (mms->gpex.mmio64.size) { |
| mmio64_alias = g_new0(MemoryRegion, 1); |
| memory_region_init_alias(mmio64_alias, OBJECT(dev), "pcie-mmio64", mmio_reg, |
| mms->gpex.mmio64.base, mms->gpex.mmio64.size); |
| memory_region_add_subregion(get_system_memory(), |
| mms->gpex.mmio64.base, mmio64_alias); |
| } |
| |
| for (i = 0; i < GPEX_NUM_IRQS; i++) { |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, |
| x86ms->gsi[mms->gpex.irq + i]); |
| } |
| } |
| |
| static int microvm_ioapics(MicrovmMachineState *mms) |
| { |
| if (!x86_machine_is_acpi_enabled(X86_MACHINE(mms))) { |
| return 1; |
| } |
| if (mms->ioapic2 == ON_OFF_AUTO_OFF) { |
| return 1; |
| } |
| return 2; |
| } |
| |
| static void microvm_devices_init(MicrovmMachineState *mms) |
| { |
| const char *default_firmware; |
| X86MachineState *x86ms = X86_MACHINE(mms); |
| ISABus *isa_bus; |
| GSIState *gsi_state; |
| int ioapics; |
| int i; |
| |
| /* Core components */ |
| ioapics = microvm_ioapics(mms); |
| gsi_state = g_malloc0(sizeof(*gsi_state)); |
| x86ms->gsi = qemu_allocate_irqs(gsi_handler, gsi_state, |
| IOAPIC_NUM_PINS * ioapics); |
| |
| isa_bus = isa_bus_new(NULL, get_system_memory(), get_system_io(), |
| &error_abort); |
| isa_bus_register_input_irqs(isa_bus, x86ms->gsi); |
| |
| ioapic_init_gsi(gsi_state, OBJECT(mms)); |
| if (ioapics > 1) { |
| x86ms->ioapic2 = ioapic_init_secondary(gsi_state); |
| } |
| |
| if (kvm_enabled()) { |
| kvmclock_create(true); |
| } |
| |
| mms->virtio_irq_base = 5; |
| mms->virtio_num_transports = 8; |
| if (x86ms->ioapic2) { |
| mms->pcie_irq_base = 16; /* 16 -> 19 */ |
| /* use second ioapic (24 -> 47) for virtio-mmio irq lines */ |
| mms->virtio_irq_base = IO_APIC_SECONDARY_IRQBASE; |
| mms->virtio_num_transports = IOAPIC_NUM_PINS; |
| } else if (x86_machine_is_acpi_enabled(x86ms)) { |
| mms->pcie_irq_base = 12; /* 12 -> 15 */ |
| mms->virtio_irq_base = 16; /* 16 -> 23 */ |
| } |
| |
| for (i = 0; i < mms->virtio_num_transports; i++) { |
| sysbus_create_simple("virtio-mmio", |
| VIRTIO_MMIO_BASE + i * 512, |
| x86ms->gsi[mms->virtio_irq_base + i]); |
| } |
| |
| /* Optional and legacy devices */ |
| if (x86_machine_is_acpi_enabled(x86ms)) { |
| DeviceState *dev = qdev_new(TYPE_ACPI_GED); |
| qdev_prop_set_uint32(dev, "ged-event", ACPI_GED_PWR_DOWN_EVT); |
| sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, GED_MMIO_BASE); |
| /* sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, GED_MMIO_BASE_MEMHP); */ |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, GED_MMIO_BASE_REGS); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, |
| x86ms->gsi[GED_MMIO_IRQ]); |
| x86ms->acpi_dev = HOTPLUG_HANDLER(dev); |
| } |
| |
| if (x86_machine_is_acpi_enabled(x86ms) && machine_usb(MACHINE(mms))) { |
| DeviceState *dev = qdev_new(TYPE_XHCI_SYSBUS); |
| qdev_prop_set_uint32(dev, "intrs", 1); |
| qdev_prop_set_uint32(dev, "slots", XHCI_MAXSLOTS); |
| qdev_prop_set_uint32(dev, "p2", 8); |
| qdev_prop_set_uint32(dev, "p3", 8); |
| sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, MICROVM_XHCI_BASE); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, |
| x86ms->gsi[MICROVM_XHCI_IRQ]); |
| } |
| |
| if (x86_machine_is_acpi_enabled(x86ms) && mms->pcie == ON_OFF_AUTO_ON) { |
| /* use topmost 25% of the address space available */ |
| hwaddr phys_size = (hwaddr)1 << X86_CPU(first_cpu)->phys_bits; |
| if (phys_size > 0x1000000ll) { |
| mms->gpex.mmio64.size = phys_size / 4; |
| mms->gpex.mmio64.base = phys_size - mms->gpex.mmio64.size; |
| } |
| mms->gpex.mmio32.base = PCIE_MMIO_BASE; |
| mms->gpex.mmio32.size = PCIE_MMIO_SIZE; |
| mms->gpex.ecam.base = PCIE_ECAM_BASE; |
| mms->gpex.ecam.size = PCIE_ECAM_SIZE; |
| mms->gpex.irq = mms->pcie_irq_base; |
| create_gpex(mms); |
| x86ms->pci_irq_mask = ((1 << (mms->pcie_irq_base + 0)) | |
| (1 << (mms->pcie_irq_base + 1)) | |
| (1 << (mms->pcie_irq_base + 2)) | |
| (1 << (mms->pcie_irq_base + 3))); |
| } else { |
| x86ms->pci_irq_mask = 0; |
| } |
| |
| if (x86ms->pic == ON_OFF_AUTO_ON || x86ms->pic == ON_OFF_AUTO_AUTO) { |
| qemu_irq *i8259; |
| |
| i8259 = i8259_init(isa_bus, x86_allocate_cpu_irq()); |
| for (i = 0; i < ISA_NUM_IRQS; i++) { |
| gsi_state->i8259_irq[i] = i8259[i]; |
| } |
| g_free(i8259); |
| } |
| |
| if (x86ms->pit == ON_OFF_AUTO_ON || x86ms->pit == ON_OFF_AUTO_AUTO) { |
| if (kvm_pit_in_kernel()) { |
| kvm_pit_init(isa_bus, 0x40); |
| } else { |
| i8254_pit_init(isa_bus, 0x40, 0, NULL); |
| } |
| } |
| |
| if (mms->rtc == ON_OFF_AUTO_ON || |
| (mms->rtc == ON_OFF_AUTO_AUTO && !kvm_enabled())) { |
| microvm_set_rtc(mms, mc146818_rtc_init(isa_bus, 2000, NULL)); |
| } |
| |
| if (mms->isa_serial) { |
| serial_hds_isa_init(isa_bus, 0, 1); |
| } |
| |
| default_firmware = x86_machine_is_acpi_enabled(x86ms) |
| ? MICROVM_BIOS_FILENAME |
| : MICROVM_QBOOT_FILENAME; |
| x86_bios_rom_init(MACHINE(mms), default_firmware, get_system_memory(), true); |
| } |
| |
| static void microvm_memory_init(MicrovmMachineState *mms) |
| { |
| MachineState *machine = MACHINE(mms); |
| X86MachineState *x86ms = X86_MACHINE(mms); |
| MemoryRegion *ram_below_4g, *ram_above_4g; |
| MemoryRegion *system_memory = get_system_memory(); |
| FWCfgState *fw_cfg; |
| ram_addr_t lowmem = 0xc0000000; /* 3G */ |
| int i; |
| |
| if (machine->ram_size > lowmem) { |
| x86ms->above_4g_mem_size = machine->ram_size - lowmem; |
| x86ms->below_4g_mem_size = lowmem; |
| } else { |
| x86ms->above_4g_mem_size = 0; |
| x86ms->below_4g_mem_size = machine->ram_size; |
| } |
| |
| ram_below_4g = g_malloc(sizeof(*ram_below_4g)); |
| memory_region_init_alias(ram_below_4g, NULL, "ram-below-4g", machine->ram, |
| 0, x86ms->below_4g_mem_size); |
| memory_region_add_subregion(system_memory, 0, ram_below_4g); |
| |
| e820_add_entry(0, x86ms->below_4g_mem_size, E820_RAM); |
| |
| if (x86ms->above_4g_mem_size > 0) { |
| ram_above_4g = g_malloc(sizeof(*ram_above_4g)); |
| memory_region_init_alias(ram_above_4g, NULL, "ram-above-4g", |
| machine->ram, |
| x86ms->below_4g_mem_size, |
| x86ms->above_4g_mem_size); |
| memory_region_add_subregion(system_memory, 0x100000000ULL, |
| ram_above_4g); |
| e820_add_entry(0x100000000ULL, x86ms->above_4g_mem_size, E820_RAM); |
| } |
| |
| fw_cfg = fw_cfg_init_io_dma(FW_CFG_IO_BASE, FW_CFG_IO_BASE + 4, |
| &address_space_memory); |
| |
| fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, machine->smp.cpus); |
| fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, machine->smp.max_cpus); |
| fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)machine->ram_size); |
| fw_cfg_add_i32(fw_cfg, FW_CFG_IRQ0_OVERRIDE, 1); |
| fw_cfg_add_file(fw_cfg, "etc/e820", e820_table, |
| sizeof(struct e820_entry) * e820_get_num_entries()); |
| |
| rom_set_fw(fw_cfg); |
| |
| if (machine->kernel_filename != NULL) { |
| x86_load_linux(x86ms, fw_cfg, 0, true); |
| } |
| |
| if (mms->option_roms) { |
| for (i = 0; i < nb_option_roms; i++) { |
| rom_add_option(option_rom[i].name, option_rom[i].bootindex); |
| } |
| } |
| |
| x86ms->fw_cfg = fw_cfg; |
| x86ms->ioapic_as = &address_space_memory; |
| } |
| |
| static gchar *microvm_get_mmio_cmdline(gchar *name, uint32_t virtio_irq_base) |
| { |
| gchar *cmdline; |
| gchar *separator; |
| long int index; |
| int ret; |
| |
| separator = g_strrstr(name, "."); |
| if (!separator) { |
| return NULL; |
| } |
| |
| if (qemu_strtol(separator + 1, NULL, 10, &index) != 0) { |
| return NULL; |
| } |
| |
| cmdline = g_malloc0(VIRTIO_CMDLINE_MAXLEN); |
| ret = g_snprintf(cmdline, VIRTIO_CMDLINE_MAXLEN, |
| " virtio_mmio.device=512@0x%lx:%ld", |
| VIRTIO_MMIO_BASE + index * 512, |
| virtio_irq_base + index); |
| if (ret < 0 || ret >= VIRTIO_CMDLINE_MAXLEN) { |
| g_free(cmdline); |
| return NULL; |
| } |
| |
| return cmdline; |
| } |
| |
| static void microvm_fix_kernel_cmdline(MachineState *machine) |
| { |
| X86MachineState *x86ms = X86_MACHINE(machine); |
| MicrovmMachineState *mms = MICROVM_MACHINE(machine); |
| BusState *bus; |
| BusChild *kid; |
| char *cmdline; |
| |
| /* |
| * Find MMIO transports with attached devices, and add them to the kernel |
| * command line. |
| * |
| * Yes, this is a hack, but one that heavily improves the UX without |
| * introducing any significant issues. |
| */ |
| cmdline = g_strdup(machine->kernel_cmdline); |
| bus = sysbus_get_default(); |
| QTAILQ_FOREACH(kid, &bus->children, sibling) { |
| DeviceState *dev = kid->child; |
| |
| if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MMIO)) { |
| VirtIOMMIOProxy *mmio = VIRTIO_MMIO(OBJECT(dev)); |
| VirtioBusState *mmio_virtio_bus = &mmio->bus; |
| BusState *mmio_bus = &mmio_virtio_bus->parent_obj; |
| |
| if (!QTAILQ_EMPTY(&mmio_bus->children)) { |
| gchar *mmio_cmdline = microvm_get_mmio_cmdline |
| (mmio_bus->name, mms->virtio_irq_base); |
| if (mmio_cmdline) { |
| char *newcmd = g_strjoin(NULL, cmdline, mmio_cmdline, NULL); |
| g_free(mmio_cmdline); |
| g_free(cmdline); |
| cmdline = newcmd; |
| } |
| } |
| } |
| } |
| |
| fw_cfg_modify_i32(x86ms->fw_cfg, FW_CFG_CMDLINE_SIZE, strlen(cmdline) + 1); |
| fw_cfg_modify_string(x86ms->fw_cfg, FW_CFG_CMDLINE_DATA, cmdline); |
| |
| g_free(cmdline); |
| } |
| |
| static void microvm_device_pre_plug_cb(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| X86CPU *cpu = X86_CPU(dev); |
| |
| cpu->host_phys_bits = true; /* need reliable phys-bits */ |
| x86_cpu_pre_plug(hotplug_dev, dev, errp); |
| } |
| |
| static void microvm_device_plug_cb(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| x86_cpu_plug(hotplug_dev, dev, errp); |
| } |
| |
| static void microvm_device_unplug_request_cb(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| error_setg(errp, "unplug not supported by microvm"); |
| } |
| |
| static void microvm_device_unplug_cb(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| error_setg(errp, "unplug not supported by microvm"); |
| } |
| |
| static HotplugHandler *microvm_get_hotplug_handler(MachineState *machine, |
| DeviceState *dev) |
| { |
| if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { |
| return HOTPLUG_HANDLER(machine); |
| } |
| return NULL; |
| } |
| |
| static void microvm_machine_state_init(MachineState *machine) |
| { |
| MicrovmMachineState *mms = MICROVM_MACHINE(machine); |
| X86MachineState *x86ms = X86_MACHINE(machine); |
| |
| microvm_memory_init(mms); |
| |
| x86_cpus_init(x86ms, CPU_VERSION_LATEST); |
| |
| microvm_devices_init(mms); |
| } |
| |
| static void microvm_machine_reset(MachineState *machine, ShutdownCause reason) |
| { |
| MicrovmMachineState *mms = MICROVM_MACHINE(machine); |
| CPUState *cs; |
| X86CPU *cpu; |
| |
| if (!x86_machine_is_acpi_enabled(X86_MACHINE(machine)) && |
| machine->kernel_filename != NULL && |
| mms->auto_kernel_cmdline && !mms->kernel_cmdline_fixed) { |
| microvm_fix_kernel_cmdline(machine); |
| mms->kernel_cmdline_fixed = true; |
| } |
| |
| qemu_devices_reset(reason); |
| |
| CPU_FOREACH(cs) { |
| cpu = X86_CPU(cs); |
| |
| x86_cpu_after_reset(cpu); |
| } |
| } |
| |
| static void microvm_machine_get_rtc(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| MicrovmMachineState *mms = MICROVM_MACHINE(obj); |
| OnOffAuto rtc = mms->rtc; |
| |
| visit_type_OnOffAuto(v, name, &rtc, errp); |
| } |
| |
| static void microvm_machine_set_rtc(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| MicrovmMachineState *mms = MICROVM_MACHINE(obj); |
| |
| visit_type_OnOffAuto(v, name, &mms->rtc, errp); |
| } |
| |
| static void microvm_machine_get_pcie(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| MicrovmMachineState *mms = MICROVM_MACHINE(obj); |
| OnOffAuto pcie = mms->pcie; |
| |
| visit_type_OnOffAuto(v, name, &pcie, errp); |
| } |
| |
| static void microvm_machine_set_pcie(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| MicrovmMachineState *mms = MICROVM_MACHINE(obj); |
| |
| visit_type_OnOffAuto(v, name, &mms->pcie, errp); |
| } |
| |
| static void microvm_machine_get_ioapic2(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| MicrovmMachineState *mms = MICROVM_MACHINE(obj); |
| OnOffAuto ioapic2 = mms->ioapic2; |
| |
| visit_type_OnOffAuto(v, name, &ioapic2, errp); |
| } |
| |
| static void microvm_machine_set_ioapic2(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| MicrovmMachineState *mms = MICROVM_MACHINE(obj); |
| |
| visit_type_OnOffAuto(v, name, &mms->ioapic2, errp); |
| } |
| |
| static bool microvm_machine_get_isa_serial(Object *obj, Error **errp) |
| { |
| MicrovmMachineState *mms = MICROVM_MACHINE(obj); |
| |
| return mms->isa_serial; |
| } |
| |
| static void microvm_machine_set_isa_serial(Object *obj, bool value, |
| Error **errp) |
| { |
| MicrovmMachineState *mms = MICROVM_MACHINE(obj); |
| |
| mms->isa_serial = value; |
| } |
| |
| static bool microvm_machine_get_option_roms(Object *obj, Error **errp) |
| { |
| MicrovmMachineState *mms = MICROVM_MACHINE(obj); |
| |
| return mms->option_roms; |
| } |
| |
| static void microvm_machine_set_option_roms(Object *obj, bool value, |
| Error **errp) |
| { |
| MicrovmMachineState *mms = MICROVM_MACHINE(obj); |
| |
| mms->option_roms = value; |
| } |
| |
| static bool microvm_machine_get_auto_kernel_cmdline(Object *obj, Error **errp) |
| { |
| MicrovmMachineState *mms = MICROVM_MACHINE(obj); |
| |
| return mms->auto_kernel_cmdline; |
| } |
| |
| static void microvm_machine_set_auto_kernel_cmdline(Object *obj, bool value, |
| Error **errp) |
| { |
| MicrovmMachineState *mms = MICROVM_MACHINE(obj); |
| |
| mms->auto_kernel_cmdline = value; |
| } |
| |
| static void microvm_machine_done(Notifier *notifier, void *data) |
| { |
| MicrovmMachineState *mms = container_of(notifier, MicrovmMachineState, |
| machine_done); |
| |
| acpi_setup_microvm(mms); |
| dt_setup_microvm(mms); |
| } |
| |
| static void microvm_powerdown_req(Notifier *notifier, void *data) |
| { |
| MicrovmMachineState *mms = container_of(notifier, MicrovmMachineState, |
| powerdown_req); |
| X86MachineState *x86ms = X86_MACHINE(mms); |
| |
| if (x86ms->acpi_dev) { |
| Object *obj = OBJECT(x86ms->acpi_dev); |
| AcpiDeviceIfClass *adevc = ACPI_DEVICE_IF_GET_CLASS(obj); |
| adevc->send_event(ACPI_DEVICE_IF(x86ms->acpi_dev), |
| ACPI_POWER_DOWN_STATUS); |
| } |
| } |
| |
| static void microvm_machine_initfn(Object *obj) |
| { |
| MicrovmMachineState *mms = MICROVM_MACHINE(obj); |
| |
| /* Configuration */ |
| mms->rtc = ON_OFF_AUTO_AUTO; |
| mms->pcie = ON_OFF_AUTO_AUTO; |
| mms->ioapic2 = ON_OFF_AUTO_AUTO; |
| mms->isa_serial = true; |
| mms->option_roms = true; |
| mms->auto_kernel_cmdline = true; |
| |
| /* State */ |
| mms->kernel_cmdline_fixed = false; |
| |
| mms->machine_done.notify = microvm_machine_done; |
| qemu_add_machine_init_done_notifier(&mms->machine_done); |
| mms->powerdown_req.notify = microvm_powerdown_req; |
| qemu_register_powerdown_notifier(&mms->powerdown_req); |
| } |
| |
| GlobalProperty microvm_properties[] = { |
| /* |
| * pcie host bridge (gpex) on microvm has no io address window, |
| * so reserving io space is not going to work. Turn it off. |
| */ |
| { "pcie-root-port", "io-reserve", "0" }, |
| }; |
| |
| static void microvm_class_init(ObjectClass *oc, void *data) |
| { |
| X86MachineClass *x86mc = X86_MACHINE_CLASS(oc); |
| MachineClass *mc = MACHINE_CLASS(oc); |
| HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc); |
| |
| mc->init = microvm_machine_state_init; |
| |
| mc->family = "microvm_i386"; |
| mc->desc = "microvm (i386)"; |
| mc->units_per_default_bus = 1; |
| mc->no_floppy = 1; |
| mc->max_cpus = 288; |
| mc->has_hotpluggable_cpus = false; |
| mc->auto_enable_numa_with_memhp = false; |
| mc->auto_enable_numa_with_memdev = false; |
| mc->default_cpu_type = TARGET_DEFAULT_CPU_TYPE; |
| mc->nvdimm_supported = false; |
| mc->default_ram_id = "microvm.ram"; |
| |
| /* Avoid relying too much on kernel components */ |
| mc->default_kernel_irqchip_split = true; |
| |
| /* Machine class handlers */ |
| mc->reset = microvm_machine_reset; |
| |
| /* hotplug (for cpu coldplug) */ |
| mc->get_hotplug_handler = microvm_get_hotplug_handler; |
| hc->pre_plug = microvm_device_pre_plug_cb; |
| hc->plug = microvm_device_plug_cb; |
| hc->unplug_request = microvm_device_unplug_request_cb; |
| hc->unplug = microvm_device_unplug_cb; |
| |
| x86mc->fwcfg_dma_enabled = true; |
| |
| object_class_property_add(oc, MICROVM_MACHINE_RTC, "OnOffAuto", |
| microvm_machine_get_rtc, |
| microvm_machine_set_rtc, |
| NULL, NULL); |
| object_class_property_set_description(oc, MICROVM_MACHINE_RTC, |
| "Enable MC146818 RTC"); |
| |
| object_class_property_add(oc, MICROVM_MACHINE_PCIE, "OnOffAuto", |
| microvm_machine_get_pcie, |
| microvm_machine_set_pcie, |
| NULL, NULL); |
| object_class_property_set_description(oc, MICROVM_MACHINE_PCIE, |
| "Enable PCIe"); |
| |
| object_class_property_add(oc, MICROVM_MACHINE_IOAPIC2, "OnOffAuto", |
| microvm_machine_get_ioapic2, |
| microvm_machine_set_ioapic2, |
| NULL, NULL); |
| object_class_property_set_description(oc, MICROVM_MACHINE_IOAPIC2, |
| "Enable second IO-APIC"); |
| |
| object_class_property_add_bool(oc, MICROVM_MACHINE_ISA_SERIAL, |
| microvm_machine_get_isa_serial, |
| microvm_machine_set_isa_serial); |
| object_class_property_set_description(oc, MICROVM_MACHINE_ISA_SERIAL, |
| "Set off to disable the instantiation an ISA serial port"); |
| |
| object_class_property_add_bool(oc, MICROVM_MACHINE_OPTION_ROMS, |
| microvm_machine_get_option_roms, |
| microvm_machine_set_option_roms); |
| object_class_property_set_description(oc, MICROVM_MACHINE_OPTION_ROMS, |
| "Set off to disable loading option ROMs"); |
| |
| object_class_property_add_bool(oc, MICROVM_MACHINE_AUTO_KERNEL_CMDLINE, |
| microvm_machine_get_auto_kernel_cmdline, |
| microvm_machine_set_auto_kernel_cmdline); |
| object_class_property_set_description(oc, |
| MICROVM_MACHINE_AUTO_KERNEL_CMDLINE, |
| "Set off to disable adding virtio-mmio devices to the kernel cmdline"); |
| |
| machine_class_allow_dynamic_sysbus_dev(mc, TYPE_RAMFB_DEVICE); |
| |
| compat_props_add(mc->compat_props, microvm_properties, |
| G_N_ELEMENTS(microvm_properties)); |
| } |
| |
| static const TypeInfo microvm_machine_info = { |
| .name = TYPE_MICROVM_MACHINE, |
| .parent = TYPE_X86_MACHINE, |
| .instance_size = sizeof(MicrovmMachineState), |
| .instance_init = microvm_machine_initfn, |
| .class_size = sizeof(MicrovmMachineClass), |
| .class_init = microvm_class_init, |
| .interfaces = (InterfaceInfo[]) { |
| { TYPE_HOTPLUG_HANDLER }, |
| { } |
| }, |
| }; |
| |
| static void microvm_machine_init(void) |
| { |
| type_register_static(µvm_machine_info); |
| } |
| type_init(microvm_machine_init); |