| #ifndef QEMU_TIMER_H |
| #define QEMU_TIMER_H |
| |
| #include "qemu-common.h" |
| #include "notify.h" |
| #include <time.h> |
| #include <sys/time.h> |
| |
| #ifdef _WIN32 |
| #include <windows.h> |
| #endif |
| |
| /* timers */ |
| |
| #define SCALE_MS 1000000 |
| #define SCALE_US 1000 |
| #define SCALE_NS 1 |
| |
| typedef struct QEMUClock QEMUClock; |
| typedef void QEMUTimerCB(void *opaque); |
| |
| /* The real time clock should be used only for stuff which does not |
| change the virtual machine state, as it is run even if the virtual |
| machine is stopped. The real time clock has a frequency of 1000 |
| Hz. */ |
| extern QEMUClock *rt_clock; |
| |
| /* The virtual clock is only run during the emulation. It is stopped |
| when the virtual machine is stopped. Virtual timers use a high |
| precision clock, usually cpu cycles (use ticks_per_sec). */ |
| extern QEMUClock *vm_clock; |
| |
| /* The host clock should be use for device models that emulate accurate |
| real time sources. It will continue to run when the virtual machine |
| is suspended, and it will reflect system time changes the host may |
| undergo (e.g. due to NTP). The host clock has the same precision as |
| the virtual clock. */ |
| extern QEMUClock *host_clock; |
| |
| int64_t qemu_get_clock_ns(QEMUClock *clock); |
| void qemu_clock_enable(QEMUClock *clock, int enabled); |
| void qemu_clock_warp(QEMUClock *clock); |
| |
| void qemu_register_clock_reset_notifier(QEMUClock *clock, Notifier *notifier); |
| void qemu_unregister_clock_reset_notifier(QEMUClock *clock, |
| Notifier *notifier); |
| |
| QEMUTimer *qemu_new_timer(QEMUClock *clock, int scale, |
| QEMUTimerCB *cb, void *opaque); |
| void qemu_free_timer(QEMUTimer *ts); |
| void qemu_del_timer(QEMUTimer *ts); |
| void qemu_mod_timer(QEMUTimer *ts, int64_t expire_time); |
| int qemu_timer_pending(QEMUTimer *ts); |
| int qemu_timer_expired(QEMUTimer *timer_head, int64_t current_time); |
| |
| void qemu_run_all_timers(void); |
| int qemu_alarm_pending(void); |
| int64_t qemu_next_icount_deadline(void); |
| void configure_alarms(char const *opt); |
| void configure_icount(const char *option); |
| int qemu_calculate_timeout(void); |
| void init_clocks(void); |
| int init_timer_alarm(void); |
| void quit_timers(void); |
| |
| int64_t cpu_get_ticks(void); |
| void cpu_enable_ticks(void); |
| void cpu_disable_ticks(void); |
| |
| static inline QEMUTimer *qemu_new_timer_ns(QEMUClock *clock, QEMUTimerCB *cb, |
| void *opaque) |
| { |
| return qemu_new_timer(clock, SCALE_NS, cb, opaque); |
| } |
| |
| static inline QEMUTimer *qemu_new_timer_ms(QEMUClock *clock, QEMUTimerCB *cb, |
| void *opaque) |
| { |
| return qemu_new_timer(clock, SCALE_MS, cb, opaque); |
| } |
| |
| static inline int64_t qemu_get_clock_ms(QEMUClock *clock) |
| { |
| return qemu_get_clock_ns(clock) / SCALE_MS; |
| } |
| |
| static inline int64_t get_ticks_per_sec(void) |
| { |
| return 1000000000LL; |
| } |
| |
| /* real time host monotonic timer */ |
| static inline int64_t get_clock_realtime(void) |
| { |
| struct timeval tv; |
| |
| gettimeofday(&tv, NULL); |
| return tv.tv_sec * 1000000000LL + (tv.tv_usec * 1000); |
| } |
| |
| /* Warning: don't insert tracepoints into these functions, they are |
| also used by simpletrace backend and tracepoints would cause |
| an infinite recursion! */ |
| #ifdef _WIN32 |
| extern int64_t clock_freq; |
| |
| static inline int64_t get_clock(void) |
| { |
| LARGE_INTEGER ti; |
| QueryPerformanceCounter(&ti); |
| return muldiv64(ti.QuadPart, get_ticks_per_sec(), clock_freq); |
| } |
| |
| #else |
| |
| extern int use_rt_clock; |
| |
| static inline int64_t get_clock(void) |
| { |
| #if defined(__linux__) || (defined(__FreeBSD__) && __FreeBSD_version >= 500000) \ |
| || defined(__DragonFly__) || defined(__FreeBSD_kernel__) |
| if (use_rt_clock) { |
| struct timespec ts; |
| clock_gettime(CLOCK_MONOTONIC, &ts); |
| return ts.tv_sec * 1000000000LL + ts.tv_nsec; |
| } else |
| #endif |
| { |
| /* XXX: using gettimeofday leads to problems if the date |
| changes, so it should be avoided. */ |
| return get_clock_realtime(); |
| } |
| } |
| #endif |
| |
| void qemu_get_timer(QEMUFile *f, QEMUTimer *ts); |
| void qemu_put_timer(QEMUFile *f, QEMUTimer *ts); |
| |
| /* ptimer.c */ |
| typedef struct ptimer_state ptimer_state; |
| typedef void (*ptimer_cb)(void *opaque); |
| |
| ptimer_state *ptimer_init(QEMUBH *bh); |
| void ptimer_set_period(ptimer_state *s, int64_t period); |
| void ptimer_set_freq(ptimer_state *s, uint32_t freq); |
| void ptimer_set_limit(ptimer_state *s, uint64_t limit, int reload); |
| uint64_t ptimer_get_count(ptimer_state *s); |
| void ptimer_set_count(ptimer_state *s, uint64_t count); |
| void ptimer_run(ptimer_state *s, int oneshot); |
| void ptimer_stop(ptimer_state *s); |
| |
| /* icount */ |
| int64_t qemu_icount_round(int64_t count); |
| extern int64_t qemu_icount; |
| extern int use_icount; |
| extern int icount_time_shift; |
| extern int64_t qemu_icount_bias; |
| int64_t cpu_get_icount(void); |
| |
| /*******************************************/ |
| /* host CPU ticks (if available) */ |
| |
| #if defined(_ARCH_PPC) |
| |
| static inline int64_t cpu_get_real_ticks(void) |
| { |
| int64_t retval; |
| #ifdef _ARCH_PPC64 |
| /* This reads timebase in one 64bit go and includes Cell workaround from: |
| http://ozlabs.org/pipermail/linuxppc-dev/2006-October/027052.html |
| */ |
| __asm__ __volatile__ ("mftb %0\n\t" |
| "cmpwi %0,0\n\t" |
| "beq- $-8" |
| : "=r" (retval)); |
| #else |
| /* http://ozlabs.org/pipermail/linuxppc-dev/1999-October/003889.html */ |
| unsigned long junk; |
| __asm__ __volatile__ ("mfspr %1,269\n\t" /* mftbu */ |
| "mfspr %L0,268\n\t" /* mftb */ |
| "mfspr %0,269\n\t" /* mftbu */ |
| "cmpw %0,%1\n\t" |
| "bne $-16" |
| : "=r" (retval), "=r" (junk)); |
| #endif |
| return retval; |
| } |
| |
| #elif defined(__i386__) |
| |
| static inline int64_t cpu_get_real_ticks(void) |
| { |
| int64_t val; |
| asm volatile ("rdtsc" : "=A" (val)); |
| return val; |
| } |
| |
| #elif defined(__x86_64__) |
| |
| static inline int64_t cpu_get_real_ticks(void) |
| { |
| uint32_t low,high; |
| int64_t val; |
| asm volatile("rdtsc" : "=a" (low), "=d" (high)); |
| val = high; |
| val <<= 32; |
| val |= low; |
| return val; |
| } |
| |
| #elif defined(__hppa__) |
| |
| static inline int64_t cpu_get_real_ticks(void) |
| { |
| int val; |
| asm volatile ("mfctl %%cr16, %0" : "=r"(val)); |
| return val; |
| } |
| |
| #elif defined(__ia64) |
| |
| static inline int64_t cpu_get_real_ticks(void) |
| { |
| int64_t val; |
| asm volatile ("mov %0 = ar.itc" : "=r"(val) :: "memory"); |
| return val; |
| } |
| |
| #elif defined(__s390__) |
| |
| static inline int64_t cpu_get_real_ticks(void) |
| { |
| int64_t val; |
| asm volatile("stck 0(%1)" : "=m" (val) : "a" (&val) : "cc"); |
| return val; |
| } |
| |
| #elif defined(__sparc_v8plus__) || defined(__sparc_v8plusa__) || defined(__sparc_v9__) |
| |
| static inline int64_t cpu_get_real_ticks (void) |
| { |
| #if defined(_LP64) |
| uint64_t rval; |
| asm volatile("rd %%tick,%0" : "=r"(rval)); |
| return rval; |
| #else |
| union { |
| uint64_t i64; |
| struct { |
| uint32_t high; |
| uint32_t low; |
| } i32; |
| } rval; |
| asm volatile("rd %%tick,%1; srlx %1,32,%0" |
| : "=r"(rval.i32.high), "=r"(rval.i32.low)); |
| return rval.i64; |
| #endif |
| } |
| |
| #elif defined(__mips__) && \ |
| ((defined(__mips_isa_rev) && __mips_isa_rev >= 2) || defined(__linux__)) |
| /* |
| * binutils wants to use rdhwr only on mips32r2 |
| * but as linux kernel emulate it, it's fine |
| * to use it. |
| * |
| */ |
| #define MIPS_RDHWR(rd, value) { \ |
| __asm__ __volatile__ (".set push\n\t" \ |
| ".set mips32r2\n\t" \ |
| "rdhwr %0, "rd"\n\t" \ |
| ".set pop" \ |
| : "=r" (value)); \ |
| } |
| |
| static inline int64_t cpu_get_real_ticks(void) |
| { |
| /* On kernels >= 2.6.25 rdhwr <reg>, $2 and $3 are emulated */ |
| uint32_t count; |
| static uint32_t cyc_per_count = 0; |
| |
| if (!cyc_per_count) { |
| MIPS_RDHWR("$3", cyc_per_count); |
| } |
| |
| MIPS_RDHWR("$2", count); |
| return (int64_t)(count * cyc_per_count); |
| } |
| |
| #elif defined(__alpha__) |
| |
| static inline int64_t cpu_get_real_ticks(void) |
| { |
| uint64_t cc; |
| uint32_t cur, ofs; |
| |
| asm volatile("rpcc %0" : "=r"(cc)); |
| cur = cc; |
| ofs = cc >> 32; |
| return cur - ofs; |
| } |
| |
| #else |
| /* The host CPU doesn't have an easily accessible cycle counter. |
| Just return a monotonically increasing value. This will be |
| totally wrong, but hopefully better than nothing. */ |
| static inline int64_t cpu_get_real_ticks (void) |
| { |
| static int64_t ticks = 0; |
| return ticks++; |
| } |
| #endif |
| |
| #ifdef NEED_CPU_H |
| /* Deterministic execution requires that IO only be performed on the last |
| instruction of a TB so that interrupts take effect immediately. */ |
| static inline int can_do_io(CPUState *env) |
| { |
| if (!use_icount) |
| return 1; |
| |
| /* If not executing code then assume we are ok. */ |
| if (!env->current_tb) |
| return 1; |
| |
| return env->can_do_io != 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_PROFILER |
| static inline int64_t profile_getclock(void) |
| { |
| return cpu_get_real_ticks(); |
| } |
| |
| extern int64_t qemu_time, qemu_time_start; |
| extern int64_t tlb_flush_time; |
| extern int64_t dev_time; |
| #endif |
| |
| #endif |