| /* |
| * ARM Versatile Platform/Application Baseboard System emulation. |
| * |
| * Copyright (c) 2005-2007 CodeSourcery. |
| * Written by Paul Brook |
| * |
| * This code is licenced under the GPL. |
| */ |
| |
| #include "sysbus.h" |
| #include "arm-misc.h" |
| #include "primecell.h" |
| #include "devices.h" |
| #include "net.h" |
| #include "sysemu.h" |
| #include "pci.h" |
| #include "boards.h" |
| |
| /* Primary interrupt controller. */ |
| |
| typedef struct vpb_sic_state |
| { |
| SysBusDevice busdev; |
| uint32_t level; |
| uint32_t mask; |
| uint32_t pic_enable; |
| qemu_irq parent[32]; |
| int irq; |
| } vpb_sic_state; |
| |
| static void vpb_sic_update(vpb_sic_state *s) |
| { |
| uint32_t flags; |
| |
| flags = s->level & s->mask; |
| qemu_set_irq(s->parent[s->irq], flags != 0); |
| } |
| |
| static void vpb_sic_update_pic(vpb_sic_state *s) |
| { |
| int i; |
| uint32_t mask; |
| |
| for (i = 21; i <= 30; i++) { |
| mask = 1u << i; |
| if (!(s->pic_enable & mask)) |
| continue; |
| qemu_set_irq(s->parent[i], (s->level & mask) != 0); |
| } |
| } |
| |
| static void vpb_sic_set_irq(void *opaque, int irq, int level) |
| { |
| vpb_sic_state *s = (vpb_sic_state *)opaque; |
| if (level) |
| s->level |= 1u << irq; |
| else |
| s->level &= ~(1u << irq); |
| if (s->pic_enable & (1u << irq)) |
| qemu_set_irq(s->parent[irq], level); |
| vpb_sic_update(s); |
| } |
| |
| static uint32_t vpb_sic_read(void *opaque, target_phys_addr_t offset) |
| { |
| vpb_sic_state *s = (vpb_sic_state *)opaque; |
| |
| switch (offset >> 2) { |
| case 0: /* STATUS */ |
| return s->level & s->mask; |
| case 1: /* RAWSTAT */ |
| return s->level; |
| case 2: /* ENABLE */ |
| return s->mask; |
| case 4: /* SOFTINT */ |
| return s->level & 1; |
| case 8: /* PICENABLE */ |
| return s->pic_enable; |
| default: |
| printf ("vpb_sic_read: Bad register offset 0x%x\n", (int)offset); |
| return 0; |
| } |
| } |
| |
| static void vpb_sic_write(void *opaque, target_phys_addr_t offset, |
| uint32_t value) |
| { |
| vpb_sic_state *s = (vpb_sic_state *)opaque; |
| |
| switch (offset >> 2) { |
| case 2: /* ENSET */ |
| s->mask |= value; |
| break; |
| case 3: /* ENCLR */ |
| s->mask &= ~value; |
| break; |
| case 4: /* SOFTINTSET */ |
| if (value) |
| s->mask |= 1; |
| break; |
| case 5: /* SOFTINTCLR */ |
| if (value) |
| s->mask &= ~1u; |
| break; |
| case 8: /* PICENSET */ |
| s->pic_enable |= (value & 0x7fe00000); |
| vpb_sic_update_pic(s); |
| break; |
| case 9: /* PICENCLR */ |
| s->pic_enable &= ~value; |
| vpb_sic_update_pic(s); |
| break; |
| default: |
| printf ("vpb_sic_write: Bad register offset 0x%x\n", (int)offset); |
| return; |
| } |
| vpb_sic_update(s); |
| } |
| |
| static CPUReadMemoryFunc * const vpb_sic_readfn[] = { |
| vpb_sic_read, |
| vpb_sic_read, |
| vpb_sic_read |
| }; |
| |
| static CPUWriteMemoryFunc * const vpb_sic_writefn[] = { |
| vpb_sic_write, |
| vpb_sic_write, |
| vpb_sic_write |
| }; |
| |
| static int vpb_sic_init(SysBusDevice *dev) |
| { |
| vpb_sic_state *s = FROM_SYSBUS(vpb_sic_state, dev); |
| int iomemtype; |
| int i; |
| |
| qdev_init_gpio_in(&dev->qdev, vpb_sic_set_irq, 32); |
| for (i = 0; i < 32; i++) { |
| sysbus_init_irq(dev, &s->parent[i]); |
| } |
| s->irq = 31; |
| iomemtype = cpu_register_io_memory(vpb_sic_readfn, |
| vpb_sic_writefn, s); |
| sysbus_init_mmio(dev, 0x1000, iomemtype); |
| /* ??? Save/restore. */ |
| return 0; |
| } |
| |
| /* Board init. */ |
| |
| /* The AB and PB boards both use the same core, just with different |
| peripherans and expansion busses. For now we emulate a subset of the |
| PB peripherals and just change the board ID. */ |
| |
| static struct arm_boot_info versatile_binfo; |
| |
| static void versatile_init(ram_addr_t ram_size, |
| const char *boot_device, |
| const char *kernel_filename, const char *kernel_cmdline, |
| const char *initrd_filename, const char *cpu_model, |
| int board_id) |
| { |
| CPUState *env; |
| ram_addr_t ram_offset; |
| qemu_irq *cpu_pic; |
| qemu_irq pic[32]; |
| qemu_irq sic[32]; |
| DeviceState *dev; |
| PCIBus *pci_bus; |
| NICInfo *nd; |
| int n; |
| int done_smc = 0; |
| |
| if (!cpu_model) |
| cpu_model = "arm926"; |
| env = cpu_init(cpu_model); |
| if (!env) { |
| fprintf(stderr, "Unable to find CPU definition\n"); |
| exit(1); |
| } |
| ram_offset = qemu_ram_alloc(ram_size); |
| /* ??? RAM should repeat to fill physical memory space. */ |
| /* SDRAM at address zero. */ |
| cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM); |
| |
| arm_sysctl_init(0x10000000, 0x41007004); |
| cpu_pic = arm_pic_init_cpu(env); |
| dev = sysbus_create_varargs("pl190", 0x10140000, |
| cpu_pic[0], cpu_pic[1], NULL); |
| for (n = 0; n < 32; n++) { |
| pic[n] = qdev_get_gpio_in(dev, n); |
| } |
| dev = sysbus_create_simple("versatilepb_sic", 0x10003000, NULL); |
| for (n = 0; n < 32; n++) { |
| sysbus_connect_irq(sysbus_from_qdev(dev), n, pic[n]); |
| sic[n] = qdev_get_gpio_in(dev, n); |
| } |
| |
| sysbus_create_simple("pl050_keyboard", 0x10006000, sic[3]); |
| sysbus_create_simple("pl050_mouse", 0x10007000, sic[4]); |
| |
| dev = sysbus_create_varargs("versatile_pci", 0x40000000, |
| sic[27], sic[28], sic[29], sic[30], NULL); |
| pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci"); |
| |
| /* The Versatile PCI bridge does not provide access to PCI IO space, |
| so many of the qemu PCI devices are not useable. */ |
| for(n = 0; n < nb_nics; n++) { |
| nd = &nd_table[n]; |
| |
| if ((!nd->model && !done_smc) || strcmp(nd->model, "smc91c111") == 0) { |
| smc91c111_init(nd, 0x10010000, sic[25]); |
| done_smc = 1; |
| } else { |
| pci_nic_init_nofail(nd, "rtl8139", NULL); |
| } |
| } |
| if (usb_enabled) { |
| usb_ohci_init_pci(pci_bus, -1); |
| } |
| n = drive_get_max_bus(IF_SCSI); |
| while (n >= 0) { |
| pci_create_simple(pci_bus, -1, "lsi53c895a"); |
| n--; |
| } |
| |
| sysbus_create_simple("pl011", 0x101f1000, pic[12]); |
| sysbus_create_simple("pl011", 0x101f2000, pic[13]); |
| sysbus_create_simple("pl011", 0x101f3000, pic[14]); |
| sysbus_create_simple("pl011", 0x10009000, sic[6]); |
| |
| sysbus_create_simple("pl080", 0x10130000, pic[17]); |
| sysbus_create_simple("sp804", 0x101e2000, pic[4]); |
| sysbus_create_simple("sp804", 0x101e3000, pic[5]); |
| |
| /* The versatile/PB actually has a modified Color LCD controller |
| that includes hardware cursor support from the PL111. */ |
| sysbus_create_simple("pl110_versatile", 0x10120000, pic[16]); |
| |
| sysbus_create_varargs("pl181", 0x10005000, sic[22], sic[1], NULL); |
| sysbus_create_varargs("pl181", 0x1000b000, sic[23], sic[2], NULL); |
| |
| /* Add PL031 Real Time Clock. */ |
| sysbus_create_simple("pl031", 0x101e8000, pic[10]); |
| |
| /* Memory map for Versatile/PB: */ |
| /* 0x10000000 System registers. */ |
| /* 0x10001000 PCI controller config registers. */ |
| /* 0x10002000 Serial bus interface. */ |
| /* 0x10003000 Secondary interrupt controller. */ |
| /* 0x10004000 AACI (audio). */ |
| /* 0x10005000 MMCI0. */ |
| /* 0x10006000 KMI0 (keyboard). */ |
| /* 0x10007000 KMI1 (mouse). */ |
| /* 0x10008000 Character LCD Interface. */ |
| /* 0x10009000 UART3. */ |
| /* 0x1000a000 Smart card 1. */ |
| /* 0x1000b000 MMCI1. */ |
| /* 0x10010000 Ethernet. */ |
| /* 0x10020000 USB. */ |
| /* 0x10100000 SSMC. */ |
| /* 0x10110000 MPMC. */ |
| /* 0x10120000 CLCD Controller. */ |
| /* 0x10130000 DMA Controller. */ |
| /* 0x10140000 Vectored interrupt controller. */ |
| /* 0x101d0000 AHB Monitor Interface. */ |
| /* 0x101e0000 System Controller. */ |
| /* 0x101e1000 Watchdog Interface. */ |
| /* 0x101e2000 Timer 0/1. */ |
| /* 0x101e3000 Timer 2/3. */ |
| /* 0x101e4000 GPIO port 0. */ |
| /* 0x101e5000 GPIO port 1. */ |
| /* 0x101e6000 GPIO port 2. */ |
| /* 0x101e7000 GPIO port 3. */ |
| /* 0x101e8000 RTC. */ |
| /* 0x101f0000 Smart card 0. */ |
| /* 0x101f1000 UART0. */ |
| /* 0x101f2000 UART1. */ |
| /* 0x101f3000 UART2. */ |
| /* 0x101f4000 SSPI. */ |
| |
| versatile_binfo.ram_size = ram_size; |
| versatile_binfo.kernel_filename = kernel_filename; |
| versatile_binfo.kernel_cmdline = kernel_cmdline; |
| versatile_binfo.initrd_filename = initrd_filename; |
| versatile_binfo.board_id = board_id; |
| arm_load_kernel(env, &versatile_binfo); |
| } |
| |
| static void vpb_init(ram_addr_t ram_size, |
| const char *boot_device, |
| const char *kernel_filename, const char *kernel_cmdline, |
| const char *initrd_filename, const char *cpu_model) |
| { |
| versatile_init(ram_size, |
| boot_device, |
| kernel_filename, kernel_cmdline, |
| initrd_filename, cpu_model, 0x183); |
| } |
| |
| static void vab_init(ram_addr_t ram_size, |
| const char *boot_device, |
| const char *kernel_filename, const char *kernel_cmdline, |
| const char *initrd_filename, const char *cpu_model) |
| { |
| versatile_init(ram_size, |
| boot_device, |
| kernel_filename, kernel_cmdline, |
| initrd_filename, cpu_model, 0x25e); |
| } |
| |
| static QEMUMachine versatilepb_machine = { |
| .name = "versatilepb", |
| .desc = "ARM Versatile/PB (ARM926EJ-S)", |
| .init = vpb_init, |
| .use_scsi = 1, |
| }; |
| |
| static QEMUMachine versatileab_machine = { |
| .name = "versatileab", |
| .desc = "ARM Versatile/AB (ARM926EJ-S)", |
| .init = vab_init, |
| .use_scsi = 1, |
| }; |
| |
| static void versatile_machine_init(void) |
| { |
| qemu_register_machine(&versatilepb_machine); |
| qemu_register_machine(&versatileab_machine); |
| } |
| |
| machine_init(versatile_machine_init); |
| |
| static void versatilepb_register_devices(void) |
| { |
| sysbus_register_dev("versatilepb_sic", sizeof(vpb_sic_state), |
| vpb_sic_init); |
| } |
| |
| device_init(versatilepb_register_devices) |
