| /* |
| * RAM allocation and memory access |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2.1 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "exec/page-vary.h" |
| #include "qapi/error.h" |
| |
| #include "qemu/cutils.h" |
| #include "qemu/cacheflush.h" |
| #include "qemu/hbitmap.h" |
| #include "qemu/madvise.h" |
| #include "qemu/lockable.h" |
| |
| #ifdef CONFIG_TCG |
| #include "hw/core/tcg-cpu-ops.h" |
| #endif /* CONFIG_TCG */ |
| |
| #include "exec/exec-all.h" |
| #include "exec/page-protection.h" |
| #include "exec/target_page.h" |
| #include "hw/qdev-core.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/boards.h" |
| #include "sysemu/xen.h" |
| #include "sysemu/kvm.h" |
| #include "sysemu/tcg.h" |
| #include "sysemu/qtest.h" |
| #include "qemu/timer.h" |
| #include "qemu/config-file.h" |
| #include "qemu/error-report.h" |
| #include "qemu/qemu-print.h" |
| #include "qemu/log.h" |
| #include "qemu/memalign.h" |
| #include "exec/memory.h" |
| #include "exec/ioport.h" |
| #include "sysemu/dma.h" |
| #include "sysemu/hostmem.h" |
| #include "sysemu/hw_accel.h" |
| #include "sysemu/xen-mapcache.h" |
| #include "trace.h" |
| |
| #ifdef CONFIG_FALLOCATE_PUNCH_HOLE |
| #include <linux/falloc.h> |
| #endif |
| |
| #include "qemu/rcu_queue.h" |
| #include "qemu/main-loop.h" |
| #include "exec/translate-all.h" |
| #include "sysemu/replay.h" |
| |
| #include "exec/memory-internal.h" |
| #include "exec/ram_addr.h" |
| |
| #include "qemu/pmem.h" |
| |
| #include "migration/vmstate.h" |
| |
| #include "qemu/range.h" |
| #ifndef _WIN32 |
| #include "qemu/mmap-alloc.h" |
| #endif |
| |
| #include "monitor/monitor.h" |
| |
| #ifdef CONFIG_LIBDAXCTL |
| #include <daxctl/libdaxctl.h> |
| #endif |
| |
| //#define DEBUG_SUBPAGE |
| |
| /* ram_list is read under rcu_read_lock()/rcu_read_unlock(). Writes |
| * are protected by the ramlist lock. |
| */ |
| RAMList ram_list = { .blocks = QLIST_HEAD_INITIALIZER(ram_list.blocks) }; |
| |
| static MemoryRegion *system_memory; |
| static MemoryRegion *system_io; |
| |
| AddressSpace address_space_io; |
| AddressSpace address_space_memory; |
| |
| static MemoryRegion io_mem_unassigned; |
| |
| typedef struct PhysPageEntry PhysPageEntry; |
| |
| struct PhysPageEntry { |
| /* How many bits skip to next level (in units of L2_SIZE). 0 for a leaf. */ |
| uint32_t skip : 6; |
| /* index into phys_sections (!skip) or phys_map_nodes (skip) */ |
| uint32_t ptr : 26; |
| }; |
| |
| #define PHYS_MAP_NODE_NIL (((uint32_t)~0) >> 6) |
| |
| /* Size of the L2 (and L3, etc) page tables. */ |
| #define ADDR_SPACE_BITS 64 |
| |
| #define P_L2_BITS 9 |
| #define P_L2_SIZE (1 << P_L2_BITS) |
| |
| #define P_L2_LEVELS (((ADDR_SPACE_BITS - TARGET_PAGE_BITS - 1) / P_L2_BITS) + 1) |
| |
| typedef PhysPageEntry Node[P_L2_SIZE]; |
| |
| typedef struct PhysPageMap { |
| struct rcu_head rcu; |
| |
| unsigned sections_nb; |
| unsigned sections_nb_alloc; |
| unsigned nodes_nb; |
| unsigned nodes_nb_alloc; |
| Node *nodes; |
| MemoryRegionSection *sections; |
| } PhysPageMap; |
| |
| struct AddressSpaceDispatch { |
| MemoryRegionSection *mru_section; |
| /* This is a multi-level map on the physical address space. |
| * The bottom level has pointers to MemoryRegionSections. |
| */ |
| PhysPageEntry phys_map; |
| PhysPageMap map; |
| }; |
| |
| #define SUBPAGE_IDX(addr) ((addr) & ~TARGET_PAGE_MASK) |
| typedef struct subpage_t { |
| MemoryRegion iomem; |
| FlatView *fv; |
| hwaddr base; |
| uint16_t sub_section[]; |
| } subpage_t; |
| |
| #define PHYS_SECTION_UNASSIGNED 0 |
| |
| static void io_mem_init(void); |
| static void memory_map_init(void); |
| static void tcg_log_global_after_sync(MemoryListener *listener); |
| static void tcg_commit(MemoryListener *listener); |
| |
| /** |
| * CPUAddressSpace: all the information a CPU needs about an AddressSpace |
| * @cpu: the CPU whose AddressSpace this is |
| * @as: the AddressSpace itself |
| * @memory_dispatch: its dispatch pointer (cached, RCU protected) |
| * @tcg_as_listener: listener for tracking changes to the AddressSpace |
| */ |
| typedef struct CPUAddressSpace { |
| CPUState *cpu; |
| AddressSpace *as; |
| struct AddressSpaceDispatch *memory_dispatch; |
| MemoryListener tcg_as_listener; |
| } CPUAddressSpace; |
| |
| struct DirtyBitmapSnapshot { |
| ram_addr_t start; |
| ram_addr_t end; |
| unsigned long dirty[]; |
| }; |
| |
| static void phys_map_node_reserve(PhysPageMap *map, unsigned nodes) |
| { |
| static unsigned alloc_hint = 16; |
| if (map->nodes_nb + nodes > map->nodes_nb_alloc) { |
| map->nodes_nb_alloc = MAX(alloc_hint, map->nodes_nb + nodes); |
| map->nodes = g_renew(Node, map->nodes, map->nodes_nb_alloc); |
| alloc_hint = map->nodes_nb_alloc; |
| } |
| } |
| |
| static uint32_t phys_map_node_alloc(PhysPageMap *map, bool leaf) |
| { |
| unsigned i; |
| uint32_t ret; |
| PhysPageEntry e; |
| PhysPageEntry *p; |
| |
| ret = map->nodes_nb++; |
| p = map->nodes[ret]; |
| assert(ret != PHYS_MAP_NODE_NIL); |
| assert(ret != map->nodes_nb_alloc); |
| |
| e.skip = leaf ? 0 : 1; |
| e.ptr = leaf ? PHYS_SECTION_UNASSIGNED : PHYS_MAP_NODE_NIL; |
| for (i = 0; i < P_L2_SIZE; ++i) { |
| memcpy(&p[i], &e, sizeof(e)); |
| } |
| return ret; |
| } |
| |
| static void phys_page_set_level(PhysPageMap *map, PhysPageEntry *lp, |
| hwaddr *index, uint64_t *nb, uint16_t leaf, |
| int level) |
| { |
| PhysPageEntry *p; |
| hwaddr step = (hwaddr)1 << (level * P_L2_BITS); |
| |
| if (lp->skip && lp->ptr == PHYS_MAP_NODE_NIL) { |
| lp->ptr = phys_map_node_alloc(map, level == 0); |
| } |
| p = map->nodes[lp->ptr]; |
| lp = &p[(*index >> (level * P_L2_BITS)) & (P_L2_SIZE - 1)]; |
| |
| while (*nb && lp < &p[P_L2_SIZE]) { |
| if ((*index & (step - 1)) == 0 && *nb >= step) { |
| lp->skip = 0; |
| lp->ptr = leaf; |
| *index += step; |
| *nb -= step; |
| } else { |
| phys_page_set_level(map, lp, index, nb, leaf, level - 1); |
| } |
| ++lp; |
| } |
| } |
| |
| static void phys_page_set(AddressSpaceDispatch *d, |
| hwaddr index, uint64_t nb, |
| uint16_t leaf) |
| { |
| /* Wildly overreserve - it doesn't matter much. */ |
| phys_map_node_reserve(&d->map, 3 * P_L2_LEVELS); |
| |
| phys_page_set_level(&d->map, &d->phys_map, &index, &nb, leaf, P_L2_LEVELS - 1); |
| } |
| |
| /* Compact a non leaf page entry. Simply detect that the entry has a single child, |
| * and update our entry so we can skip it and go directly to the destination. |
| */ |
| static void phys_page_compact(PhysPageEntry *lp, Node *nodes) |
| { |
| unsigned valid_ptr = P_L2_SIZE; |
| int valid = 0; |
| PhysPageEntry *p; |
| int i; |
| |
| if (lp->ptr == PHYS_MAP_NODE_NIL) { |
| return; |
| } |
| |
| p = nodes[lp->ptr]; |
| for (i = 0; i < P_L2_SIZE; i++) { |
| if (p[i].ptr == PHYS_MAP_NODE_NIL) { |
| continue; |
| } |
| |
| valid_ptr = i; |
| valid++; |
| if (p[i].skip) { |
| phys_page_compact(&p[i], nodes); |
| } |
| } |
| |
| /* We can only compress if there's only one child. */ |
| if (valid != 1) { |
| return; |
| } |
| |
| assert(valid_ptr < P_L2_SIZE); |
| |
| /* Don't compress if it won't fit in the # of bits we have. */ |
| if (P_L2_LEVELS >= (1 << 6) && |
| lp->skip + p[valid_ptr].skip >= (1 << 6)) { |
| return; |
| } |
| |
| lp->ptr = p[valid_ptr].ptr; |
| if (!p[valid_ptr].skip) { |
| /* If our only child is a leaf, make this a leaf. */ |
| /* By design, we should have made this node a leaf to begin with so we |
| * should never reach here. |
| * But since it's so simple to handle this, let's do it just in case we |
| * change this rule. |
| */ |
| lp->skip = 0; |
| } else { |
| lp->skip += p[valid_ptr].skip; |
| } |
| } |
| |
| void address_space_dispatch_compact(AddressSpaceDispatch *d) |
| { |
| if (d->phys_map.skip) { |
| phys_page_compact(&d->phys_map, d->map.nodes); |
| } |
| } |
| |
| static inline bool section_covers_addr(const MemoryRegionSection *section, |
| hwaddr addr) |
| { |
| /* Memory topology clips a memory region to [0, 2^64); size.hi > 0 means |
| * the section must cover the entire address space. |
| */ |
| return int128_gethi(section->size) || |
| range_covers_byte(section->offset_within_address_space, |
| int128_getlo(section->size), addr); |
| } |
| |
| static MemoryRegionSection *phys_page_find(AddressSpaceDispatch *d, hwaddr addr) |
| { |
| PhysPageEntry lp = d->phys_map, *p; |
| Node *nodes = d->map.nodes; |
| MemoryRegionSection *sections = d->map.sections; |
| hwaddr index = addr >> TARGET_PAGE_BITS; |
| int i; |
| |
| for (i = P_L2_LEVELS; lp.skip && (i -= lp.skip) >= 0;) { |
| if (lp.ptr == PHYS_MAP_NODE_NIL) { |
| return §ions[PHYS_SECTION_UNASSIGNED]; |
| } |
| p = nodes[lp.ptr]; |
| lp = p[(index >> (i * P_L2_BITS)) & (P_L2_SIZE - 1)]; |
| } |
| |
| if (section_covers_addr(§ions[lp.ptr], addr)) { |
| return §ions[lp.ptr]; |
| } else { |
| return §ions[PHYS_SECTION_UNASSIGNED]; |
| } |
| } |
| |
| /* Called from RCU critical section */ |
| static MemoryRegionSection *address_space_lookup_region(AddressSpaceDispatch *d, |
| hwaddr addr, |
| bool resolve_subpage) |
| { |
| MemoryRegionSection *section = qatomic_read(&d->mru_section); |
| subpage_t *subpage; |
| |
| if (!section || section == &d->map.sections[PHYS_SECTION_UNASSIGNED] || |
| !section_covers_addr(section, addr)) { |
| section = phys_page_find(d, addr); |
| qatomic_set(&d->mru_section, section); |
| } |
| if (resolve_subpage && section->mr->subpage) { |
| subpage = container_of(section->mr, subpage_t, iomem); |
| section = &d->map.sections[subpage->sub_section[SUBPAGE_IDX(addr)]]; |
| } |
| return section; |
| } |
| |
| /* Called from RCU critical section */ |
| static MemoryRegionSection * |
| address_space_translate_internal(AddressSpaceDispatch *d, hwaddr addr, hwaddr *xlat, |
| hwaddr *plen, bool resolve_subpage) |
| { |
| MemoryRegionSection *section; |
| MemoryRegion *mr; |
| Int128 diff; |
| |
| section = address_space_lookup_region(d, addr, resolve_subpage); |
| /* Compute offset within MemoryRegionSection */ |
| addr -= section->offset_within_address_space; |
| |
| /* Compute offset within MemoryRegion */ |
| *xlat = addr + section->offset_within_region; |
| |
| mr = section->mr; |
| |
| /* MMIO registers can be expected to perform full-width accesses based only |
| * on their address, without considering adjacent registers that could |
| * decode to completely different MemoryRegions. When such registers |
| * exist (e.g. I/O ports 0xcf8 and 0xcf9 on most PC chipsets), MMIO |
| * regions overlap wildly. For this reason we cannot clamp the accesses |
| * here. |
| * |
| * If the length is small (as is the case for address_space_ldl/stl), |
| * everything works fine. If the incoming length is large, however, |
| * the caller really has to do the clamping through memory_access_size. |
| */ |
| if (memory_region_is_ram(mr)) { |
| diff = int128_sub(section->size, int128_make64(addr)); |
| *plen = int128_get64(int128_min(diff, int128_make64(*plen))); |
| } |
| return section; |
| } |
| |
| /** |
| * address_space_translate_iommu - translate an address through an IOMMU |
| * memory region and then through the target address space. |
| * |
| * @iommu_mr: the IOMMU memory region that we start the translation from |
| * @addr: the address to be translated through the MMU |
| * @xlat: the translated address offset within the destination memory region. |
| * It cannot be %NULL. |
| * @plen_out: valid read/write length of the translated address. It |
| * cannot be %NULL. |
| * @page_mask_out: page mask for the translated address. This |
| * should only be meaningful for IOMMU translated |
| * addresses, since there may be huge pages that this bit |
| * would tell. It can be %NULL if we don't care about it. |
| * @is_write: whether the translation operation is for write |
| * @is_mmio: whether this can be MMIO, set true if it can |
| * @target_as: the address space targeted by the IOMMU |
| * @attrs: transaction attributes |
| * |
| * This function is called from RCU critical section. It is the common |
| * part of flatview_do_translate and address_space_translate_cached. |
| */ |
| static MemoryRegionSection address_space_translate_iommu(IOMMUMemoryRegion *iommu_mr, |
| hwaddr *xlat, |
| hwaddr *plen_out, |
| hwaddr *page_mask_out, |
| bool is_write, |
| bool is_mmio, |
| AddressSpace **target_as, |
| MemTxAttrs attrs) |
| { |
| MemoryRegionSection *section; |
| hwaddr page_mask = (hwaddr)-1; |
| |
| do { |
| hwaddr addr = *xlat; |
| IOMMUMemoryRegionClass *imrc = memory_region_get_iommu_class_nocheck(iommu_mr); |
| int iommu_idx = 0; |
| IOMMUTLBEntry iotlb; |
| |
| if (imrc->attrs_to_index) { |
| iommu_idx = imrc->attrs_to_index(iommu_mr, attrs); |
| } |
| |
| iotlb = imrc->translate(iommu_mr, addr, is_write ? |
| IOMMU_WO : IOMMU_RO, iommu_idx); |
| |
| if (!(iotlb.perm & (1 << is_write))) { |
| goto unassigned; |
| } |
| |
| addr = ((iotlb.translated_addr & ~iotlb.addr_mask) |
| | (addr & iotlb.addr_mask)); |
| page_mask &= iotlb.addr_mask; |
| *plen_out = MIN(*plen_out, (addr | iotlb.addr_mask) - addr + 1); |
| *target_as = iotlb.target_as; |
| |
| section = address_space_translate_internal( |
| address_space_to_dispatch(iotlb.target_as), addr, xlat, |
| plen_out, is_mmio); |
| |
| iommu_mr = memory_region_get_iommu(section->mr); |
| } while (unlikely(iommu_mr)); |
| |
| if (page_mask_out) { |
| *page_mask_out = page_mask; |
| } |
| return *section; |
| |
| unassigned: |
| return (MemoryRegionSection) { .mr = &io_mem_unassigned }; |
| } |
| |
| /** |
| * flatview_do_translate - translate an address in FlatView |
| * |
| * @fv: the flat view that we want to translate on |
| * @addr: the address to be translated in above address space |
| * @xlat: the translated address offset within memory region. It |
| * cannot be @NULL. |
| * @plen_out: valid read/write length of the translated address. It |
| * can be @NULL when we don't care about it. |
| * @page_mask_out: page mask for the translated address. This |
| * should only be meaningful for IOMMU translated |
| * addresses, since there may be huge pages that this bit |
| * would tell. It can be @NULL if we don't care about it. |
| * @is_write: whether the translation operation is for write |
| * @is_mmio: whether this can be MMIO, set true if it can |
| * @target_as: the address space targeted by the IOMMU |
| * @attrs: memory transaction attributes |
| * |
| * This function is called from RCU critical section |
| */ |
| static MemoryRegionSection flatview_do_translate(FlatView *fv, |
| hwaddr addr, |
| hwaddr *xlat, |
| hwaddr *plen_out, |
| hwaddr *page_mask_out, |
| bool is_write, |
| bool is_mmio, |
| AddressSpace **target_as, |
| MemTxAttrs attrs) |
| { |
| MemoryRegionSection *section; |
| IOMMUMemoryRegion *iommu_mr; |
| hwaddr plen = (hwaddr)(-1); |
| |
| if (!plen_out) { |
| plen_out = &plen; |
| } |
| |
| section = address_space_translate_internal( |
| flatview_to_dispatch(fv), addr, xlat, |
| plen_out, is_mmio); |
| |
| iommu_mr = memory_region_get_iommu(section->mr); |
| if (unlikely(iommu_mr)) { |
| return address_space_translate_iommu(iommu_mr, xlat, |
| plen_out, page_mask_out, |
| is_write, is_mmio, |
| target_as, attrs); |
| } |
| if (page_mask_out) { |
| /* Not behind an IOMMU, use default page size. */ |
| *page_mask_out = ~TARGET_PAGE_MASK; |
| } |
| |
| return *section; |
| } |
| |
| /* Called from RCU critical section */ |
| IOMMUTLBEntry address_space_get_iotlb_entry(AddressSpace *as, hwaddr addr, |
| bool is_write, MemTxAttrs attrs) |
| { |
| MemoryRegionSection section; |
| hwaddr xlat, page_mask; |
| |
| /* |
| * This can never be MMIO, and we don't really care about plen, |
| * but page mask. |
| */ |
| section = flatview_do_translate(address_space_to_flatview(as), addr, &xlat, |
| NULL, &page_mask, is_write, false, &as, |
| attrs); |
| |
| /* Illegal translation */ |
| if (section.mr == &io_mem_unassigned) { |
| goto iotlb_fail; |
| } |
| |
| /* Convert memory region offset into address space offset */ |
| xlat += section.offset_within_address_space - |
| section.offset_within_region; |
| |
| return (IOMMUTLBEntry) { |
| .target_as = as, |
| .iova = addr & ~page_mask, |
| .translated_addr = xlat & ~page_mask, |
| .addr_mask = page_mask, |
| /* IOTLBs are for DMAs, and DMA only allows on RAMs. */ |
| .perm = IOMMU_RW, |
| }; |
| |
| iotlb_fail: |
| return (IOMMUTLBEntry) {0}; |
| } |
| |
| /* Called from RCU critical section */ |
| MemoryRegion *flatview_translate(FlatView *fv, hwaddr addr, hwaddr *xlat, |
| hwaddr *plen, bool is_write, |
| MemTxAttrs attrs) |
| { |
| MemoryRegion *mr; |
| MemoryRegionSection section; |
| AddressSpace *as = NULL; |
| |
| /* This can be MMIO, so setup MMIO bit. */ |
| section = flatview_do_translate(fv, addr, xlat, plen, NULL, |
| is_write, true, &as, attrs); |
| mr = section.mr; |
| |
| if (xen_enabled() && memory_access_is_direct(mr, is_write)) { |
| hwaddr page = ((addr & TARGET_PAGE_MASK) + TARGET_PAGE_SIZE) - addr; |
| *plen = MIN(page, *plen); |
| } |
| |
| return mr; |
| } |
| |
| typedef struct TCGIOMMUNotifier { |
| IOMMUNotifier n; |
| MemoryRegion *mr; |
| CPUState *cpu; |
| int iommu_idx; |
| bool active; |
| } TCGIOMMUNotifier; |
| |
| static void tcg_iommu_unmap_notify(IOMMUNotifier *n, IOMMUTLBEntry *iotlb) |
| { |
| TCGIOMMUNotifier *notifier = container_of(n, TCGIOMMUNotifier, n); |
| |
| if (!notifier->active) { |
| return; |
| } |
| tlb_flush(notifier->cpu); |
| notifier->active = false; |
| /* We leave the notifier struct on the list to avoid reallocating it later. |
| * Generally the number of IOMMUs a CPU deals with will be small. |
| * In any case we can't unregister the iommu notifier from a notify |
| * callback. |
| */ |
| } |
| |
| static void tcg_register_iommu_notifier(CPUState *cpu, |
| IOMMUMemoryRegion *iommu_mr, |
| int iommu_idx) |
| { |
| /* Make sure this CPU has an IOMMU notifier registered for this |
| * IOMMU/IOMMU index combination, so that we can flush its TLB |
| * when the IOMMU tells us the mappings we've cached have changed. |
| */ |
| MemoryRegion *mr = MEMORY_REGION(iommu_mr); |
| TCGIOMMUNotifier *notifier = NULL; |
| int i; |
| |
| for (i = 0; i < cpu->iommu_notifiers->len; i++) { |
| notifier = g_array_index(cpu->iommu_notifiers, TCGIOMMUNotifier *, i); |
| if (notifier->mr == mr && notifier->iommu_idx == iommu_idx) { |
| break; |
| } |
| } |
| if (i == cpu->iommu_notifiers->len) { |
| /* Not found, add a new entry at the end of the array */ |
| cpu->iommu_notifiers = g_array_set_size(cpu->iommu_notifiers, i + 1); |
| notifier = g_new0(TCGIOMMUNotifier, 1); |
| g_array_index(cpu->iommu_notifiers, TCGIOMMUNotifier *, i) = notifier; |
| |
| notifier->mr = mr; |
| notifier->iommu_idx = iommu_idx; |
| notifier->cpu = cpu; |
| /* Rather than trying to register interest in the specific part |
| * of the iommu's address space that we've accessed and then |
| * expand it later as subsequent accesses touch more of it, we |
| * just register interest in the whole thing, on the assumption |
| * that iommu reconfiguration will be rare. |
| */ |
| iommu_notifier_init(¬ifier->n, |
| tcg_iommu_unmap_notify, |
| IOMMU_NOTIFIER_UNMAP, |
| 0, |
| HWADDR_MAX, |
| iommu_idx); |
| memory_region_register_iommu_notifier(notifier->mr, ¬ifier->n, |
| &error_fatal); |
| } |
| |
| if (!notifier->active) { |
| notifier->active = true; |
| } |
| } |
| |
| void tcg_iommu_free_notifier_list(CPUState *cpu) |
| { |
| /* Destroy the CPU's notifier list */ |
| int i; |
| TCGIOMMUNotifier *notifier; |
| |
| for (i = 0; i < cpu->iommu_notifiers->len; i++) { |
| notifier = g_array_index(cpu->iommu_notifiers, TCGIOMMUNotifier *, i); |
| memory_region_unregister_iommu_notifier(notifier->mr, ¬ifier->n); |
| g_free(notifier); |
| } |
| g_array_free(cpu->iommu_notifiers, true); |
| } |
| |
| void tcg_iommu_init_notifier_list(CPUState *cpu) |
| { |
| cpu->iommu_notifiers = g_array_new(false, true, sizeof(TCGIOMMUNotifier *)); |
| } |
| |
| /* Called from RCU critical section */ |
| MemoryRegionSection * |
| address_space_translate_for_iotlb(CPUState *cpu, int asidx, hwaddr orig_addr, |
| hwaddr *xlat, hwaddr *plen, |
| MemTxAttrs attrs, int *prot) |
| { |
| MemoryRegionSection *section; |
| IOMMUMemoryRegion *iommu_mr; |
| IOMMUMemoryRegionClass *imrc; |
| IOMMUTLBEntry iotlb; |
| int iommu_idx; |
| hwaddr addr = orig_addr; |
| AddressSpaceDispatch *d = cpu->cpu_ases[asidx].memory_dispatch; |
| |
| for (;;) { |
| section = address_space_translate_internal(d, addr, &addr, plen, false); |
| |
| iommu_mr = memory_region_get_iommu(section->mr); |
| if (!iommu_mr) { |
| break; |
| } |
| |
| imrc = memory_region_get_iommu_class_nocheck(iommu_mr); |
| |
| iommu_idx = imrc->attrs_to_index(iommu_mr, attrs); |
| tcg_register_iommu_notifier(cpu, iommu_mr, iommu_idx); |
| /* We need all the permissions, so pass IOMMU_NONE so the IOMMU |
| * doesn't short-cut its translation table walk. |
| */ |
| iotlb = imrc->translate(iommu_mr, addr, IOMMU_NONE, iommu_idx); |
| addr = ((iotlb.translated_addr & ~iotlb.addr_mask) |
| | (addr & iotlb.addr_mask)); |
| /* Update the caller's prot bits to remove permissions the IOMMU |
| * is giving us a failure response for. If we get down to no |
| * permissions left at all we can give up now. |
| */ |
| if (!(iotlb.perm & IOMMU_RO)) { |
| *prot &= ~(PAGE_READ | PAGE_EXEC); |
| } |
| if (!(iotlb.perm & IOMMU_WO)) { |
| *prot &= ~PAGE_WRITE; |
| } |
| |
| if (!*prot) { |
| goto translate_fail; |
| } |
| |
| d = flatview_to_dispatch(address_space_to_flatview(iotlb.target_as)); |
| } |
| |
| assert(!memory_region_is_iommu(section->mr)); |
| *xlat = addr; |
| return section; |
| |
| translate_fail: |
| /* |
| * We should be given a page-aligned address -- certainly |
| * tlb_set_page_with_attrs() does so. The page offset of xlat |
| * is used to index sections[], and PHYS_SECTION_UNASSIGNED = 0. |
| * The page portion of xlat will be logged by memory_region_access_valid() |
| * when this memory access is rejected, so use the original untranslated |
| * physical address. |
| */ |
| assert((orig_addr & ~TARGET_PAGE_MASK) == 0); |
| *xlat = orig_addr; |
| return &d->map.sections[PHYS_SECTION_UNASSIGNED]; |
| } |
| |
| void cpu_address_space_init(CPUState *cpu, int asidx, |
| const char *prefix, MemoryRegion *mr) |
| { |
| CPUAddressSpace *newas; |
| AddressSpace *as = g_new0(AddressSpace, 1); |
| char *as_name; |
| |
| assert(mr); |
| as_name = g_strdup_printf("%s-%d", prefix, cpu->cpu_index); |
| address_space_init(as, mr, as_name); |
| g_free(as_name); |
| |
| /* Target code should have set num_ases before calling us */ |
| assert(asidx < cpu->num_ases); |
| |
| if (asidx == 0) { |
| /* address space 0 gets the convenience alias */ |
| cpu->as = as; |
| } |
| |
| /* KVM cannot currently support multiple address spaces. */ |
| assert(asidx == 0 || !kvm_enabled()); |
| |
| if (!cpu->cpu_ases) { |
| cpu->cpu_ases = g_new0(CPUAddressSpace, cpu->num_ases); |
| cpu->cpu_ases_count = cpu->num_ases; |
| } |
| |
| newas = &cpu->cpu_ases[asidx]; |
| newas->cpu = cpu; |
| newas->as = as; |
| if (tcg_enabled()) { |
| newas->tcg_as_listener.log_global_after_sync = tcg_log_global_after_sync; |
| newas->tcg_as_listener.commit = tcg_commit; |
| newas->tcg_as_listener.name = "tcg"; |
| memory_listener_register(&newas->tcg_as_listener, as); |
| } |
| } |
| |
| void cpu_address_space_destroy(CPUState *cpu, int asidx) |
| { |
| CPUAddressSpace *cpuas; |
| |
| assert(cpu->cpu_ases); |
| assert(asidx >= 0 && asidx < cpu->num_ases); |
| /* KVM cannot currently support multiple address spaces. */ |
| assert(asidx == 0 || !kvm_enabled()); |
| |
| cpuas = &cpu->cpu_ases[asidx]; |
| if (tcg_enabled()) { |
| memory_listener_unregister(&cpuas->tcg_as_listener); |
| } |
| |
| address_space_destroy(cpuas->as); |
| g_free_rcu(cpuas->as, rcu); |
| |
| if (asidx == 0) { |
| /* reset the convenience alias for address space 0 */ |
| cpu->as = NULL; |
| } |
| |
| if (--cpu->cpu_ases_count == 0) { |
| g_free(cpu->cpu_ases); |
| cpu->cpu_ases = NULL; |
| } |
| } |
| |
| AddressSpace *cpu_get_address_space(CPUState *cpu, int asidx) |
| { |
| /* Return the AddressSpace corresponding to the specified index */ |
| return cpu->cpu_ases[asidx].as; |
| } |
| |
| /* Called from RCU critical section */ |
| static RAMBlock *qemu_get_ram_block(ram_addr_t addr) |
| { |
| RAMBlock *block; |
| |
| block = qatomic_rcu_read(&ram_list.mru_block); |
| if (block && addr - block->offset < block->max_length) { |
| return block; |
| } |
| RAMBLOCK_FOREACH(block) { |
| if (addr - block->offset < block->max_length) { |
| goto found; |
| } |
| } |
| |
| fprintf(stderr, "Bad ram offset %" PRIx64 "\n", (uint64_t)addr); |
| abort(); |
| |
| found: |
| /* It is safe to write mru_block outside the BQL. This |
| * is what happens: |
| * |
| * mru_block = xxx |
| * rcu_read_unlock() |
| * xxx removed from list |
| * rcu_read_lock() |
| * read mru_block |
| * mru_block = NULL; |
| * call_rcu(reclaim_ramblock, xxx); |
| * rcu_read_unlock() |
| * |
| * qatomic_rcu_set is not needed here. The block was already published |
| * when it was placed into the list. Here we're just making an extra |
| * copy of the pointer. |
| */ |
| ram_list.mru_block = block; |
| return block; |
| } |
| |
| void tlb_reset_dirty_range_all(ram_addr_t start, ram_addr_t length) |
| { |
| CPUState *cpu; |
| ram_addr_t start1; |
| RAMBlock *block; |
| ram_addr_t end; |
| |
| assert(tcg_enabled()); |
| end = TARGET_PAGE_ALIGN(start + length); |
| start &= TARGET_PAGE_MASK; |
| |
| RCU_READ_LOCK_GUARD(); |
| block = qemu_get_ram_block(start); |
| assert(block == qemu_get_ram_block(end - 1)); |
| start1 = (uintptr_t)ramblock_ptr(block, start - block->offset); |
| CPU_FOREACH(cpu) { |
| tlb_reset_dirty(cpu, start1, length); |
| } |
| } |
| |
| /* Note: start and end must be within the same ram block. */ |
| bool cpu_physical_memory_test_and_clear_dirty(ram_addr_t start, |
| ram_addr_t length, |
| unsigned client) |
| { |
| DirtyMemoryBlocks *blocks; |
| unsigned long end, page, start_page; |
| bool dirty = false; |
| RAMBlock *ramblock; |
| uint64_t mr_offset, mr_size; |
| |
| if (length == 0) { |
| return false; |
| } |
| |
| end = TARGET_PAGE_ALIGN(start + length) >> TARGET_PAGE_BITS; |
| start_page = start >> TARGET_PAGE_BITS; |
| page = start_page; |
| |
| WITH_RCU_READ_LOCK_GUARD() { |
| blocks = qatomic_rcu_read(&ram_list.dirty_memory[client]); |
| ramblock = qemu_get_ram_block(start); |
| /* Range sanity check on the ramblock */ |
| assert(start >= ramblock->offset && |
| start + length <= ramblock->offset + ramblock->used_length); |
| |
| while (page < end) { |
| unsigned long idx = page / DIRTY_MEMORY_BLOCK_SIZE; |
| unsigned long offset = page % DIRTY_MEMORY_BLOCK_SIZE; |
| unsigned long num = MIN(end - page, |
| DIRTY_MEMORY_BLOCK_SIZE - offset); |
| |
| dirty |= bitmap_test_and_clear_atomic(blocks->blocks[idx], |
| offset, num); |
| page += num; |
| } |
| |
| mr_offset = (ram_addr_t)(start_page << TARGET_PAGE_BITS) - ramblock->offset; |
| mr_size = (end - start_page) << TARGET_PAGE_BITS; |
| memory_region_clear_dirty_bitmap(ramblock->mr, mr_offset, mr_size); |
| } |
| |
| if (dirty) { |
| cpu_physical_memory_dirty_bits_cleared(start, length); |
| } |
| |
| return dirty; |
| } |
| |
| DirtyBitmapSnapshot *cpu_physical_memory_snapshot_and_clear_dirty |
| (MemoryRegion *mr, hwaddr offset, hwaddr length, unsigned client) |
| { |
| DirtyMemoryBlocks *blocks; |
| ram_addr_t start, first, last; |
| unsigned long align = 1UL << (TARGET_PAGE_BITS + BITS_PER_LEVEL); |
| DirtyBitmapSnapshot *snap; |
| unsigned long page, end, dest; |
| |
| start = memory_region_get_ram_addr(mr); |
| /* We know we're only called for RAM MemoryRegions */ |
| assert(start != RAM_ADDR_INVALID); |
| start += offset; |
| |
| first = QEMU_ALIGN_DOWN(start, align); |
| last = QEMU_ALIGN_UP(start + length, align); |
| |
| snap = g_malloc0(sizeof(*snap) + |
| ((last - first) >> (TARGET_PAGE_BITS + 3))); |
| snap->start = first; |
| snap->end = last; |
| |
| page = first >> TARGET_PAGE_BITS; |
| end = last >> TARGET_PAGE_BITS; |
| dest = 0; |
| |
| WITH_RCU_READ_LOCK_GUARD() { |
| blocks = qatomic_rcu_read(&ram_list.dirty_memory[client]); |
| |
| while (page < end) { |
| unsigned long idx = page / DIRTY_MEMORY_BLOCK_SIZE; |
| unsigned long ofs = page % DIRTY_MEMORY_BLOCK_SIZE; |
| unsigned long num = MIN(end - page, |
| DIRTY_MEMORY_BLOCK_SIZE - ofs); |
| |
| assert(QEMU_IS_ALIGNED(ofs, (1 << BITS_PER_LEVEL))); |
| assert(QEMU_IS_ALIGNED(num, (1 << BITS_PER_LEVEL))); |
| ofs >>= BITS_PER_LEVEL; |
| |
| bitmap_copy_and_clear_atomic(snap->dirty + dest, |
| blocks->blocks[idx] + ofs, |
| num); |
| page += num; |
| dest += num >> BITS_PER_LEVEL; |
| } |
| } |
| |
| cpu_physical_memory_dirty_bits_cleared(start, length); |
| |
| memory_region_clear_dirty_bitmap(mr, offset, length); |
| |
| return snap; |
| } |
| |
| bool cpu_physical_memory_snapshot_get_dirty(DirtyBitmapSnapshot *snap, |
| ram_addr_t start, |
| ram_addr_t length) |
| { |
| unsigned long page, end; |
| |
| assert(start >= snap->start); |
| assert(start + length <= snap->end); |
| |
| end = TARGET_PAGE_ALIGN(start + length - snap->start) >> TARGET_PAGE_BITS; |
| page = (start - snap->start) >> TARGET_PAGE_BITS; |
| |
| while (page < end) { |
| if (test_bit(page, snap->dirty)) { |
| return true; |
| } |
| page++; |
| } |
| return false; |
| } |
| |
| /* Called from RCU critical section */ |
| hwaddr memory_region_section_get_iotlb(CPUState *cpu, |
| MemoryRegionSection *section) |
| { |
| AddressSpaceDispatch *d = flatview_to_dispatch(section->fv); |
| return section - d->map.sections; |
| } |
| |
| static int subpage_register(subpage_t *mmio, uint32_t start, uint32_t end, |
| uint16_t section); |
| static subpage_t *subpage_init(FlatView *fv, hwaddr base); |
| |
| static uint16_t phys_section_add(PhysPageMap *map, |
| MemoryRegionSection *section) |
| { |
| /* The physical section number is ORed with a page-aligned |
| * pointer to produce the iotlb entries. Thus it should |
| * never overflow into the page-aligned value. |
| */ |
| assert(map->sections_nb < TARGET_PAGE_SIZE); |
| |
| if (map->sections_nb == map->sections_nb_alloc) { |
| map->sections_nb_alloc = MAX(map->sections_nb_alloc * 2, 16); |
| map->sections = g_renew(MemoryRegionSection, map->sections, |
| map->sections_nb_alloc); |
| } |
| map->sections[map->sections_nb] = *section; |
| memory_region_ref(section->mr); |
| return map->sections_nb++; |
| } |
| |
| static void phys_section_destroy(MemoryRegion *mr) |
| { |
| bool have_sub_page = mr->subpage; |
| |
| memory_region_unref(mr); |
| |
| if (have_sub_page) { |
| subpage_t *subpage = container_of(mr, subpage_t, iomem); |
| object_unref(OBJECT(&subpage->iomem)); |
| g_free(subpage); |
| } |
| } |
| |
| static void phys_sections_free(PhysPageMap *map) |
| { |
| while (map->sections_nb > 0) { |
| MemoryRegionSection *section = &map->sections[--map->sections_nb]; |
| phys_section_destroy(section->mr); |
| } |
| g_free(map->sections); |
| g_free(map->nodes); |
| } |
| |
| static void register_subpage(FlatView *fv, MemoryRegionSection *section) |
| { |
| AddressSpaceDispatch *d = flatview_to_dispatch(fv); |
| subpage_t *subpage; |
| hwaddr base = section->offset_within_address_space |
| & TARGET_PAGE_MASK; |
| MemoryRegionSection *existing = phys_page_find(d, base); |
| MemoryRegionSection subsection = { |
| .offset_within_address_space = base, |
| .size = int128_make64(TARGET_PAGE_SIZE), |
| }; |
| hwaddr start, end; |
| |
| assert(existing->mr->subpage || existing->mr == &io_mem_unassigned); |
| |
| if (!(existing->mr->subpage)) { |
| subpage = subpage_init(fv, base); |
| subsection.fv = fv; |
| subsection.mr = &subpage->iomem; |
| phys_page_set(d, base >> TARGET_PAGE_BITS, 1, |
| phys_section_add(&d->map, &subsection)); |
| } else { |
| subpage = container_of(existing->mr, subpage_t, iomem); |
| } |
| start = section->offset_within_address_space & ~TARGET_PAGE_MASK; |
| end = start + int128_get64(section->size) - 1; |
| subpage_register(subpage, start, end, |
| phys_section_add(&d->map, section)); |
| } |
| |
| |
| static void register_multipage(FlatView *fv, |
| MemoryRegionSection *section) |
| { |
| AddressSpaceDispatch *d = flatview_to_dispatch(fv); |
| hwaddr start_addr = section->offset_within_address_space; |
| uint16_t section_index = phys_section_add(&d->map, section); |
| uint64_t num_pages = int128_get64(int128_rshift(section->size, |
| TARGET_PAGE_BITS)); |
| |
| assert(num_pages); |
| phys_page_set(d, start_addr >> TARGET_PAGE_BITS, num_pages, section_index); |
| } |
| |
| /* |
| * The range in *section* may look like this: |
| * |
| * |s|PPPPPPP|s| |
| * |
| * where s stands for subpage and P for page. |
| */ |
| void flatview_add_to_dispatch(FlatView *fv, MemoryRegionSection *section) |
| { |
| MemoryRegionSection remain = *section; |
| Int128 page_size = int128_make64(TARGET_PAGE_SIZE); |
| |
| /* register first subpage */ |
| if (remain.offset_within_address_space & ~TARGET_PAGE_MASK) { |
| uint64_t left = TARGET_PAGE_ALIGN(remain.offset_within_address_space) |
| - remain.offset_within_address_space; |
| |
| MemoryRegionSection now = remain; |
| now.size = int128_min(int128_make64(left), now.size); |
| register_subpage(fv, &now); |
| if (int128_eq(remain.size, now.size)) { |
| return; |
| } |
| remain.size = int128_sub(remain.size, now.size); |
| remain.offset_within_address_space += int128_get64(now.size); |
| remain.offset_within_region += int128_get64(now.size); |
| } |
| |
| /* register whole pages */ |
| if (int128_ge(remain.size, page_size)) { |
| MemoryRegionSection now = remain; |
| now.size = int128_and(now.size, int128_neg(page_size)); |
| register_multipage(fv, &now); |
| if (int128_eq(remain.size, now.size)) { |
| return; |
| } |
| remain.size = int128_sub(remain.size, now.size); |
| remain.offset_within_address_space += int128_get64(now.size); |
| remain.offset_within_region += int128_get64(now.size); |
| } |
| |
| /* register last subpage */ |
| register_subpage(fv, &remain); |
| } |
| |
| void qemu_flush_coalesced_mmio_buffer(void) |
| { |
| if (kvm_enabled()) |
| kvm_flush_coalesced_mmio_buffer(); |
| } |
| |
| void qemu_mutex_lock_ramlist(void) |
| { |
| qemu_mutex_lock(&ram_list.mutex); |
| } |
| |
| void qemu_mutex_unlock_ramlist(void) |
| { |
| qemu_mutex_unlock(&ram_list.mutex); |
| } |
| |
| GString *ram_block_format(void) |
| { |
| RAMBlock *block; |
| char *psize; |
| GString *buf = g_string_new(""); |
| |
| RCU_READ_LOCK_GUARD(); |
| g_string_append_printf(buf, "%24s %8s %18s %18s %18s %18s %3s\n", |
| "Block Name", "PSize", "Offset", "Used", "Total", |
| "HVA", "RO"); |
| |
| RAMBLOCK_FOREACH(block) { |
| psize = size_to_str(block->page_size); |
| g_string_append_printf(buf, "%24s %8s 0x%016" PRIx64 " 0x%016" PRIx64 |
| " 0x%016" PRIx64 " 0x%016" PRIx64 " %3s\n", |
| block->idstr, psize, |
| (uint64_t)block->offset, |
| (uint64_t)block->used_length, |
| (uint64_t)block->max_length, |
| (uint64_t)(uintptr_t)block->host, |
| block->mr->readonly ? "ro" : "rw"); |
| |
| g_free(psize); |
| } |
| |
| return buf; |
| } |
| |
| static int find_min_backend_pagesize(Object *obj, void *opaque) |
| { |
| long *hpsize_min = opaque; |
| |
| if (object_dynamic_cast(obj, TYPE_MEMORY_BACKEND)) { |
| HostMemoryBackend *backend = MEMORY_BACKEND(obj); |
| long hpsize = host_memory_backend_pagesize(backend); |
| |
| if (host_memory_backend_is_mapped(backend) && (hpsize < *hpsize_min)) { |
| *hpsize_min = hpsize; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int find_max_backend_pagesize(Object *obj, void *opaque) |
| { |
| long *hpsize_max = opaque; |
| |
| if (object_dynamic_cast(obj, TYPE_MEMORY_BACKEND)) { |
| HostMemoryBackend *backend = MEMORY_BACKEND(obj); |
| long hpsize = host_memory_backend_pagesize(backend); |
| |
| if (host_memory_backend_is_mapped(backend) && (hpsize > *hpsize_max)) { |
| *hpsize_max = hpsize; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * TODO: We assume right now that all mapped host memory backends are |
| * used as RAM, however some might be used for different purposes. |
| */ |
| long qemu_minrampagesize(void) |
| { |
| long hpsize = LONG_MAX; |
| Object *memdev_root = object_resolve_path("/objects", NULL); |
| |
| object_child_foreach(memdev_root, find_min_backend_pagesize, &hpsize); |
| return hpsize; |
| } |
| |
| long qemu_maxrampagesize(void) |
| { |
| long pagesize = 0; |
| Object *memdev_root = object_resolve_path("/objects", NULL); |
| |
| object_child_foreach(memdev_root, find_max_backend_pagesize, &pagesize); |
| return pagesize; |
| } |
| |
| #ifdef CONFIG_POSIX |
| static int64_t get_file_size(int fd) |
| { |
| int64_t size; |
| #if defined(__linux__) |
| struct stat st; |
| |
| if (fstat(fd, &st) < 0) { |
| return -errno; |
| } |
| |
| /* Special handling for devdax character devices */ |
| if (S_ISCHR(st.st_mode)) { |
| g_autofree char *subsystem_path = NULL; |
| g_autofree char *subsystem = NULL; |
| |
| subsystem_path = g_strdup_printf("/sys/dev/char/%d:%d/subsystem", |
| major(st.st_rdev), minor(st.st_rdev)); |
| subsystem = g_file_read_link(subsystem_path, NULL); |
| |
| if (subsystem && g_str_has_suffix(subsystem, "/dax")) { |
| g_autofree char *size_path = NULL; |
| g_autofree char *size_str = NULL; |
| |
| size_path = g_strdup_printf("/sys/dev/char/%d:%d/size", |
| major(st.st_rdev), minor(st.st_rdev)); |
| |
| if (g_file_get_contents(size_path, &size_str, NULL, NULL)) { |
| return g_ascii_strtoll(size_str, NULL, 0); |
| } |
| } |
| } |
| #endif /* defined(__linux__) */ |
| |
| /* st.st_size may be zero for special files yet lseek(2) works */ |
| size = lseek(fd, 0, SEEK_END); |
| if (size < 0) { |
| return -errno; |
| } |
| return size; |
| } |
| |
| static int64_t get_file_align(int fd) |
| { |
| int64_t align = -1; |
| #if defined(__linux__) && defined(CONFIG_LIBDAXCTL) |
| struct stat st; |
| |
| if (fstat(fd, &st) < 0) { |
| return -errno; |
| } |
| |
| /* Special handling for devdax character devices */ |
| if (S_ISCHR(st.st_mode)) { |
| g_autofree char *path = NULL; |
| g_autofree char *rpath = NULL; |
| struct daxctl_ctx *ctx; |
| struct daxctl_region *region; |
| int rc = 0; |
| |
| path = g_strdup_printf("/sys/dev/char/%d:%d", |
| major(st.st_rdev), minor(st.st_rdev)); |
| rpath = realpath(path, NULL); |
| if (!rpath) { |
| return -errno; |
| } |
| |
| rc = daxctl_new(&ctx); |
| if (rc) { |
| return -1; |
| } |
| |
| daxctl_region_foreach(ctx, region) { |
| if (strstr(rpath, daxctl_region_get_path(region))) { |
| align = daxctl_region_get_align(region); |
| break; |
| } |
| } |
| daxctl_unref(ctx); |
| } |
| #endif /* defined(__linux__) && defined(CONFIG_LIBDAXCTL) */ |
| |
| return align; |
| } |
| |
| static int file_ram_open(const char *path, |
| const char *region_name, |
| bool readonly, |
| bool *created) |
| { |
| char *filename; |
| char *sanitized_name; |
| char *c; |
| int fd = -1; |
| |
| *created = false; |
| for (;;) { |
| fd = open(path, readonly ? O_RDONLY : O_RDWR); |
| if (fd >= 0) { |
| /* |
| * open(O_RDONLY) won't fail with EISDIR. Check manually if we |
| * opened a directory and fail similarly to how we fail ENOENT |
| * in readonly mode. Note that mkstemp() would imply O_RDWR. |
| */ |
| if (readonly) { |
| struct stat file_stat; |
| |
| if (fstat(fd, &file_stat)) { |
| close(fd); |
| if (errno == EINTR) { |
| continue; |
| } |
| return -errno; |
| } else if (S_ISDIR(file_stat.st_mode)) { |
| close(fd); |
| return -EISDIR; |
| } |
| } |
| /* @path names an existing file, use it */ |
| break; |
| } |
| if (errno == ENOENT) { |
| if (readonly) { |
| /* Refuse to create new, readonly files. */ |
| return -ENOENT; |
| } |
| /* @path names a file that doesn't exist, create it */ |
| fd = open(path, O_RDWR | O_CREAT | O_EXCL, 0644); |
| if (fd >= 0) { |
| *created = true; |
| break; |
| } |
| } else if (errno == EISDIR) { |
| /* @path names a directory, create a file there */ |
| /* Make name safe to use with mkstemp by replacing '/' with '_'. */ |
| sanitized_name = g_strdup(region_name); |
| for (c = sanitized_name; *c != '\0'; c++) { |
| if (*c == '/') { |
| *c = '_'; |
| } |
| } |
| |
| filename = g_strdup_printf("%s/qemu_back_mem.%s.XXXXXX", path, |
| sanitized_name); |
| g_free(sanitized_name); |
| |
| fd = mkstemp(filename); |
| if (fd >= 0) { |
| unlink(filename); |
| g_free(filename); |
| break; |
| } |
| g_free(filename); |
| } |
| if (errno != EEXIST && errno != EINTR) { |
| return -errno; |
| } |
| /* |
| * Try again on EINTR and EEXIST. The latter happens when |
| * something else creates the file between our two open(). |
| */ |
| } |
| |
| return fd; |
| } |
| |
| static void *file_ram_alloc(RAMBlock *block, |
| ram_addr_t memory, |
| int fd, |
| bool truncate, |
| off_t offset, |
| Error **errp) |
| { |
| uint32_t qemu_map_flags; |
| void *area; |
| |
| block->page_size = qemu_fd_getpagesize(fd); |
| if (block->mr->align % block->page_size) { |
| error_setg(errp, "alignment 0x%" PRIx64 |
| " must be multiples of page size 0x%zx", |
| block->mr->align, block->page_size); |
| return NULL; |
| } else if (block->mr->align && !is_power_of_2(block->mr->align)) { |
| error_setg(errp, "alignment 0x%" PRIx64 |
| " must be a power of two", block->mr->align); |
| return NULL; |
| } else if (offset % block->page_size) { |
| error_setg(errp, "offset 0x%" PRIx64 |
| " must be multiples of page size 0x%zx", |
| offset, block->page_size); |
| return NULL; |
| } |
| block->mr->align = MAX(block->page_size, block->mr->align); |
| #if defined(__s390x__) |
| if (kvm_enabled()) { |
| block->mr->align = MAX(block->mr->align, QEMU_VMALLOC_ALIGN); |
| } |
| #endif |
| |
| if (memory < block->page_size) { |
| error_setg(errp, "memory size 0x" RAM_ADDR_FMT " must be equal to " |
| "or larger than page size 0x%zx", |
| memory, block->page_size); |
| return NULL; |
| } |
| |
| memory = ROUND_UP(memory, block->page_size); |
| |
| /* |
| * ftruncate is not supported by hugetlbfs in older |
| * hosts, so don't bother bailing out on errors. |
| * If anything goes wrong with it under other filesystems, |
| * mmap will fail. |
| * |
| * Do not truncate the non-empty backend file to avoid corrupting |
| * the existing data in the file. Disabling shrinking is not |
| * enough. For example, the current vNVDIMM implementation stores |
| * the guest NVDIMM labels at the end of the backend file. If the |
| * backend file is later extended, QEMU will not be able to find |
| * those labels. Therefore, extending the non-empty backend file |
| * is disabled as well. |
| */ |
| if (truncate && ftruncate(fd, offset + memory)) { |
| perror("ftruncate"); |
| } |
| |
| qemu_map_flags = (block->flags & RAM_READONLY) ? QEMU_MAP_READONLY : 0; |
| qemu_map_flags |= (block->flags & RAM_SHARED) ? QEMU_MAP_SHARED : 0; |
| qemu_map_flags |= (block->flags & RAM_PMEM) ? QEMU_MAP_SYNC : 0; |
| qemu_map_flags |= (block->flags & RAM_NORESERVE) ? QEMU_MAP_NORESERVE : 0; |
| area = qemu_ram_mmap(fd, memory, block->mr->align, qemu_map_flags, offset); |
| if (area == MAP_FAILED) { |
| error_setg_errno(errp, errno, |
| "unable to map backing store for guest RAM"); |
| return NULL; |
| } |
| |
| block->fd = fd; |
| block->fd_offset = offset; |
| return area; |
| } |
| #endif |
| |
| /* Allocate space within the ram_addr_t space that governs the |
| * dirty bitmaps. |
| * Called with the ramlist lock held. |
| */ |
| static ram_addr_t find_ram_offset(ram_addr_t size) |
| { |
| RAMBlock *block, *next_block; |
| ram_addr_t offset = RAM_ADDR_MAX, mingap = RAM_ADDR_MAX; |
| |
| assert(size != 0); /* it would hand out same offset multiple times */ |
| |
| if (QLIST_EMPTY_RCU(&ram_list.blocks)) { |
| return 0; |
| } |
| |
| RAMBLOCK_FOREACH(block) { |
| ram_addr_t candidate, next = RAM_ADDR_MAX; |
| |
| /* Align blocks to start on a 'long' in the bitmap |
| * which makes the bitmap sync'ing take the fast path. |
| */ |
| candidate = block->offset + block->max_length; |
| candidate = ROUND_UP(candidate, BITS_PER_LONG << TARGET_PAGE_BITS); |
| |
| /* Search for the closest following block |
| * and find the gap. |
| */ |
| RAMBLOCK_FOREACH(next_block) { |
| if (next_block->offset >= candidate) { |
| next = MIN(next, next_block->offset); |
| } |
| } |
| |
| /* If it fits remember our place and remember the size |
| * of gap, but keep going so that we might find a smaller |
| * gap to fill so avoiding fragmentation. |
| */ |
| if (next - candidate >= size && next - candidate < mingap) { |
| offset = candidate; |
| mingap = next - candidate; |
| } |
| |
| trace_find_ram_offset_loop(size, candidate, offset, next, mingap); |
| } |
| |
| if (offset == RAM_ADDR_MAX) { |
| fprintf(stderr, "Failed to find gap of requested size: %" PRIu64 "\n", |
| (uint64_t)size); |
| abort(); |
| } |
| |
| trace_find_ram_offset(size, offset); |
| |
| return offset; |
| } |
| |
| static void qemu_ram_setup_dump(void *addr, ram_addr_t size) |
| { |
| int ret; |
| |
| /* Use MADV_DONTDUMP, if user doesn't want the guest memory in the core */ |
| if (!machine_dump_guest_core(current_machine)) { |
| ret = qemu_madvise(addr, size, QEMU_MADV_DONTDUMP); |
| if (ret) { |
| perror("qemu_madvise"); |
| fprintf(stderr, "madvise doesn't support MADV_DONTDUMP, " |
| "but dump-guest-core=off specified\n"); |
| } |
| } |
| } |
| |
| const char *qemu_ram_get_idstr(RAMBlock *rb) |
| { |
| return rb->idstr; |
| } |
| |
| void *qemu_ram_get_host_addr(RAMBlock *rb) |
| { |
| return rb->host; |
| } |
| |
| ram_addr_t qemu_ram_get_offset(RAMBlock *rb) |
| { |
| return rb->offset; |
| } |
| |
| ram_addr_t qemu_ram_get_used_length(RAMBlock *rb) |
| { |
| return rb->used_length; |
| } |
| |
| ram_addr_t qemu_ram_get_max_length(RAMBlock *rb) |
| { |
| return rb->max_length; |
| } |
| |
| bool qemu_ram_is_shared(RAMBlock *rb) |
| { |
| return rb->flags & RAM_SHARED; |
| } |
| |
| bool qemu_ram_is_noreserve(RAMBlock *rb) |
| { |
| return rb->flags & RAM_NORESERVE; |
| } |
| |
| /* Note: Only set at the start of postcopy */ |
| bool qemu_ram_is_uf_zeroable(RAMBlock *rb) |
| { |
| return rb->flags & RAM_UF_ZEROPAGE; |
| } |
| |
| void qemu_ram_set_uf_zeroable(RAMBlock *rb) |
| { |
| rb->flags |= RAM_UF_ZEROPAGE; |
| } |
| |
| bool qemu_ram_is_migratable(RAMBlock *rb) |
| { |
| return rb->flags & RAM_MIGRATABLE; |
| } |
| |
| void qemu_ram_set_migratable(RAMBlock *rb) |
| { |
| rb->flags |= RAM_MIGRATABLE; |
| } |
| |
| void qemu_ram_unset_migratable(RAMBlock *rb) |
| { |
| rb->flags &= ~RAM_MIGRATABLE; |
| } |
| |
| bool qemu_ram_is_named_file(RAMBlock *rb) |
| { |
| return rb->flags & RAM_NAMED_FILE; |
| } |
| |
| int qemu_ram_get_fd(RAMBlock *rb) |
| { |
| return rb->fd; |
| } |
| |
| /* Called with the BQL held. */ |
| void qemu_ram_set_idstr(RAMBlock *new_block, const char *name, DeviceState *dev) |
| { |
| RAMBlock *block; |
| |
| assert(new_block); |
| assert(!new_block->idstr[0]); |
| |
| if (dev) { |
| char *id = qdev_get_dev_path(dev); |
| if (id) { |
| snprintf(new_block->idstr, sizeof(new_block->idstr), "%s/", id); |
| g_free(id); |
| } |
| } |
| pstrcat(new_block->idstr, sizeof(new_block->idstr), name); |
| |
| RCU_READ_LOCK_GUARD(); |
| RAMBLOCK_FOREACH(block) { |
| if (block != new_block && |
| !strcmp(block->idstr, new_block->idstr)) { |
| fprintf(stderr, "RAMBlock \"%s\" already registered, abort!\n", |
| new_block->idstr); |
| abort(); |
| } |
| } |
| } |
| |
| /* Called with the BQL held. */ |
| void qemu_ram_unset_idstr(RAMBlock *block) |
| { |
| /* FIXME: arch_init.c assumes that this is not called throughout |
| * migration. Ignore the problem since hot-unplug during migration |
| * does not work anyway. |
| */ |
| if (block) { |
| memset(block->idstr, 0, sizeof(block->idstr)); |
| } |
| } |
| |
| size_t qemu_ram_pagesize(RAMBlock *rb) |
| { |
| return rb->page_size; |
| } |
| |
| /* Returns the largest size of page in use */ |
| size_t qemu_ram_pagesize_largest(void) |
| { |
| RAMBlock *block; |
| size_t largest = 0; |
| |
| RAMBLOCK_FOREACH(block) { |
| largest = MAX(largest, qemu_ram_pagesize(block)); |
| } |
| |
| return largest; |
| } |
| |
| static int memory_try_enable_merging(void *addr, size_t len) |
| { |
| if (!machine_mem_merge(current_machine)) { |
| /* disabled by the user */ |
| return 0; |
| } |
| |
| return qemu_madvise(addr, len, QEMU_MADV_MERGEABLE); |
| } |
| |
| /* |
| * Resizing RAM while migrating can result in the migration being canceled. |
| * Care has to be taken if the guest might have already detected the memory. |
| * |
| * As memory core doesn't know how is memory accessed, it is up to |
| * resize callback to update device state and/or add assertions to detect |
| * misuse, if necessary. |
| */ |
| int qemu_ram_resize(RAMBlock *block, ram_addr_t newsize, Error **errp) |
| { |
| const ram_addr_t oldsize = block->used_length; |
| const ram_addr_t unaligned_size = newsize; |
| |
| assert(block); |
| |
| newsize = TARGET_PAGE_ALIGN(newsize); |
| newsize = REAL_HOST_PAGE_ALIGN(newsize); |
| |
| if (block->used_length == newsize) { |
| /* |
| * We don't have to resize the ram block (which only knows aligned |
| * sizes), however, we have to notify if the unaligned size changed. |
| */ |
| if (unaligned_size != memory_region_size(block->mr)) { |
| memory_region_set_size(block->mr, unaligned_size); |
| if (block->resized) { |
| block->resized(block->idstr, unaligned_size, block->host); |
| } |
| } |
| return 0; |
| } |
| |
| if (!(block->flags & RAM_RESIZEABLE)) { |
| error_setg_errno(errp, EINVAL, |
| "Size mismatch: %s: 0x" RAM_ADDR_FMT |
| " != 0x" RAM_ADDR_FMT, block->idstr, |
| newsize, block->used_length); |
| return -EINVAL; |
| } |
| |
| if (block->max_length < newsize) { |
| error_setg_errno(errp, EINVAL, |
| "Size too large: %s: 0x" RAM_ADDR_FMT |
| " > 0x" RAM_ADDR_FMT, block->idstr, |
| newsize, block->max_length); |
| return -EINVAL; |
| } |
| |
| /* Notify before modifying the ram block and touching the bitmaps. */ |
| if (block->host) { |
| ram_block_notify_resize(block->host, oldsize, newsize); |
| } |
| |
| cpu_physical_memory_clear_dirty_range(block->offset, block->used_length); |
| block->used_length = newsize; |
| cpu_physical_memory_set_dirty_range(block->offset, block->used_length, |
| DIRTY_CLIENTS_ALL); |
| memory_region_set_size(block->mr, unaligned_size); |
| if (block->resized) { |
| block->resized(block->idstr, unaligned_size, block->host); |
| } |
| return 0; |
| } |
| |
| /* |
| * Trigger sync on the given ram block for range [start, start + length] |
| * with the backing store if one is available. |
| * Otherwise no-op. |
| * @Note: this is supposed to be a synchronous op. |
| */ |
| void qemu_ram_msync(RAMBlock *block, ram_addr_t start, ram_addr_t length) |
| { |
| /* The requested range should fit in within the block range */ |
| g_assert((start + length) <= block->used_length); |
| |
| #ifdef CONFIG_LIBPMEM |
| /* The lack of support for pmem should not block the sync */ |
| if (ramblock_is_pmem(block)) { |
| void *addr = ramblock_ptr(block, start); |
| pmem_persist(addr, length); |
| return; |
| } |
| #endif |
| if (block->fd >= 0) { |
| /** |
| * Case there is no support for PMEM or the memory has not been |
| * specified as persistent (or is not one) - use the msync. |
| * Less optimal but still achieves the same goal |
| */ |
| void *addr = ramblock_ptr(block, start); |
| if (qemu_msync(addr, length, block->fd)) { |
| warn_report("%s: failed to sync memory range: start: " |
| RAM_ADDR_FMT " length: " RAM_ADDR_FMT, |
| __func__, start, length); |
| } |
| } |
| } |
| |
| /* Called with ram_list.mutex held */ |
| static void dirty_memory_extend(ram_addr_t new_ram_size) |
| { |
| unsigned int old_num_blocks = ram_list.num_dirty_blocks; |
| unsigned int new_num_blocks = DIV_ROUND_UP(new_ram_size, |
| DIRTY_MEMORY_BLOCK_SIZE); |
| int i; |
| |
| /* Only need to extend if block count increased */ |
| if (new_num_blocks <= old_num_blocks) { |
| return; |
| } |
| |
| for (i = 0; i < DIRTY_MEMORY_NUM; i++) { |
| DirtyMemoryBlocks *old_blocks; |
| DirtyMemoryBlocks *new_blocks; |
| int j; |
| |
| old_blocks = qatomic_rcu_read(&ram_list.dirty_memory[i]); |
| new_blocks = g_malloc(sizeof(*new_blocks) + |
| sizeof(new_blocks->blocks[0]) * new_num_blocks); |
| |
| if (old_num_blocks) { |
| memcpy(new_blocks->blocks, old_blocks->blocks, |
| old_num_blocks * sizeof(old_blocks->blocks[0])); |
| } |
| |
| for (j = old_num_blocks; j < new_num_blocks; j++) { |
| new_blocks->blocks[j] = bitmap_new(DIRTY_MEMORY_BLOCK_SIZE); |
| } |
| |
| qatomic_rcu_set(&ram_list.dirty_memory[i], new_blocks); |
| |
| if (old_blocks) { |
| g_free_rcu(old_blocks, rcu); |
| } |
| } |
| |
| ram_list.num_dirty_blocks = new_num_blocks; |
| } |
| |
| static void ram_block_add(RAMBlock *new_block, Error **errp) |
| { |
| const bool noreserve = qemu_ram_is_noreserve(new_block); |
| const bool shared = qemu_ram_is_shared(new_block); |
| RAMBlock *block; |
| RAMBlock *last_block = NULL; |
| bool free_on_error = false; |
| ram_addr_t ram_size; |
| Error *err = NULL; |
| |
| qemu_mutex_lock_ramlist(); |
| new_block->offset = find_ram_offset(new_block->max_length); |
| |
| if (!new_block->host) { |
| if (xen_enabled()) { |
| xen_ram_alloc(new_block->offset, new_block->max_length, |
| new_block->mr, &err); |
| if (err) { |
| error_propagate(errp, err); |
| qemu_mutex_unlock_ramlist(); |
| return; |
| } |
| } else { |
| new_block->host = qemu_anon_ram_alloc(new_block->max_length, |
| &new_block->mr->align, |
| shared, noreserve); |
| if (!new_block->host) { |
| error_setg_errno(errp, errno, |
| "cannot set up guest memory '%s'", |
| memory_region_name(new_block->mr)); |
| qemu_mutex_unlock_ramlist(); |
| return; |
| } |
| memory_try_enable_merging(new_block->host, new_block->max_length); |
| free_on_error = true; |
| } |
| } |
| |
| if (new_block->flags & RAM_GUEST_MEMFD) { |
| int ret; |
| |
| assert(kvm_enabled()); |
| assert(new_block->guest_memfd < 0); |
| |
| ret = ram_block_discard_require(true); |
| if (ret < 0) { |
| error_setg_errno(errp, -ret, |
| "cannot set up private guest memory: discard currently blocked"); |
| error_append_hint(errp, "Are you using assigned devices?\n"); |
| goto out_free; |
| } |
| |
| new_block->guest_memfd = kvm_create_guest_memfd(new_block->max_length, |
| 0, errp); |
| if (new_block->guest_memfd < 0) { |
| qemu_mutex_unlock_ramlist(); |
| goto out_free; |
| } |
| } |
| |
| ram_size = (new_block->offset + new_block->max_length) >> TARGET_PAGE_BITS; |
| dirty_memory_extend(ram_size); |
| /* Keep the list sorted from biggest to smallest block. Unlike QTAILQ, |
| * QLIST (which has an RCU-friendly variant) does not have insertion at |
| * tail, so save the last element in last_block. |
| */ |
| RAMBLOCK_FOREACH(block) { |
| last_block = block; |
| if (block->max_length < new_block->max_length) { |
| break; |
| } |
| } |
| if (block) { |
| QLIST_INSERT_BEFORE_RCU(block, new_block, next); |
| } else if (last_block) { |
| QLIST_INSERT_AFTER_RCU(last_block, new_block, next); |
| } else { /* list is empty */ |
| QLIST_INSERT_HEAD_RCU(&ram_list.blocks, new_block, next); |
| } |
| ram_list.mru_block = NULL; |
| |
| /* Write list before version */ |
| smp_wmb(); |
| ram_list.version++; |
| qemu_mutex_unlock_ramlist(); |
| |
| cpu_physical_memory_set_dirty_range(new_block->offset, |
| new_block->used_length, |
| DIRTY_CLIENTS_ALL); |
| |
| if (new_block->host) { |
| qemu_ram_setup_dump(new_block->host, new_block->max_length); |
| qemu_madvise(new_block->host, new_block->max_length, QEMU_MADV_HUGEPAGE); |
| /* |
| * MADV_DONTFORK is also needed by KVM in absence of synchronous MMU |
| * Configure it unless the machine is a qtest server, in which case |
| * KVM is not used and it may be forked (eg for fuzzing purposes). |
| */ |
| if (!qtest_enabled()) { |
| qemu_madvise(new_block->host, new_block->max_length, |
| QEMU_MADV_DONTFORK); |
| } |
| ram_block_notify_add(new_block->host, new_block->used_length, |
| new_block->max_length); |
| } |
| return; |
| |
| out_free: |
| if (free_on_error) { |
| qemu_anon_ram_free(new_block->host, new_block->max_length); |
| new_block->host = NULL; |
| } |
| } |
| |
| #ifdef CONFIG_POSIX |
| RAMBlock *qemu_ram_alloc_from_fd(ram_addr_t size, MemoryRegion *mr, |
| uint32_t ram_flags, int fd, off_t offset, |
| Error **errp) |
| { |
| RAMBlock *new_block; |
| Error *local_err = NULL; |
| int64_t file_size, file_align; |
| |
| /* Just support these ram flags by now. */ |
| assert((ram_flags & ~(RAM_SHARED | RAM_PMEM | RAM_NORESERVE | |
| RAM_PROTECTED | RAM_NAMED_FILE | RAM_READONLY | |
| RAM_READONLY_FD | RAM_GUEST_MEMFD)) == 0); |
| |
| if (xen_enabled()) { |
| error_setg(errp, "-mem-path not supported with Xen"); |
| return NULL; |
| } |
| |
| if (kvm_enabled() && !kvm_has_sync_mmu()) { |
| error_setg(errp, |
| "host lacks kvm mmu notifiers, -mem-path unsupported"); |
| return NULL; |
| } |
| |
| size = TARGET_PAGE_ALIGN(size); |
| size = REAL_HOST_PAGE_ALIGN(size); |
| |
| file_size = get_file_size(fd); |
| if (file_size > offset && file_size < (offset + size)) { |
| error_setg(errp, "backing store size 0x%" PRIx64 |
| " does not match 'size' option 0x" RAM_ADDR_FMT, |
| file_size, size); |
| return NULL; |
| } |
| |
| file_align = get_file_align(fd); |
| if (file_align > 0 && file_align > mr->align) { |
| error_setg(errp, "backing store align 0x%" PRIx64 |
| " is larger than 'align' option 0x%" PRIx64, |
| file_align, mr->align); |
| return NULL; |
| } |
| |
| new_block = g_malloc0(sizeof(*new_block)); |
| new_block->mr = mr; |
| new_block->used_length = size; |
| new_block->max_length = size; |
| new_block->flags = ram_flags; |
| new_block->guest_memfd = -1; |
| new_block->host = file_ram_alloc(new_block, size, fd, !file_size, offset, |
| errp); |
| if (!new_block->host) { |
| g_free(new_block); |
| return NULL; |
| } |
| |
| ram_block_add(new_block, &local_err); |
| if (local_err) { |
| g_free(new_block); |
| error_propagate(errp, local_err); |
| return NULL; |
| } |
| return new_block; |
| |
| } |
| |
| |
| RAMBlock *qemu_ram_alloc_from_file(ram_addr_t size, MemoryRegion *mr, |
| uint32_t ram_flags, const char *mem_path, |
| off_t offset, Error **errp) |
| { |
| int fd; |
| bool created; |
| RAMBlock *block; |
| |
| fd = file_ram_open(mem_path, memory_region_name(mr), |
| !!(ram_flags & RAM_READONLY_FD), &created); |
| if (fd < 0) { |
| error_setg_errno(errp, -fd, "can't open backing store %s for guest RAM", |
| mem_path); |
| if (!(ram_flags & RAM_READONLY_FD) && !(ram_flags & RAM_SHARED) && |
| fd == -EACCES) { |
| /* |
| * If we can open the file R/O (note: will never create a new file) |
| * and we are dealing with a private mapping, there are still ways |
| * to consume such files and get RAM instead of ROM. |
| */ |
| fd = file_ram_open(mem_path, memory_region_name(mr), true, |
| &created); |
| if (fd < 0) { |
| return NULL; |
| } |
| assert(!created); |
| close(fd); |
| error_append_hint(errp, "Consider opening the backing store" |
| " read-only but still creating writable RAM using" |
| " '-object memory-backend-file,readonly=on,rom=off...'" |
| " (see \"VM templating\" documentation)\n"); |
| } |
| return NULL; |
| } |
| |
| block = qemu_ram_alloc_from_fd(size, mr, ram_flags, fd, offset, errp); |
| if (!block) { |
| if (created) { |
| unlink(mem_path); |
| } |
| close(fd); |
| return NULL; |
| } |
| |
| return block; |
| } |
| #endif |
| |
| static |
| RAMBlock *qemu_ram_alloc_internal(ram_addr_t size, ram_addr_t max_size, |
| void (*resized)(const char*, |
| uint64_t length, |
| void *host), |
| void *host, uint32_t ram_flags, |
| MemoryRegion *mr, Error **errp) |
| { |
| RAMBlock *new_block; |
| Error *local_err = NULL; |
| int align; |
| |
| assert((ram_flags & ~(RAM_SHARED | RAM_RESIZEABLE | RAM_PREALLOC | |
| RAM_NORESERVE | RAM_GUEST_MEMFD)) == 0); |
| assert(!host ^ (ram_flags & RAM_PREALLOC)); |
| |
| align = qemu_real_host_page_size(); |
| align = MAX(align, TARGET_PAGE_SIZE); |
| size = ROUND_UP(size, align); |
| max_size = ROUND_UP(max_size, align); |
| |
| new_block = g_malloc0(sizeof(*new_block)); |
| new_block->mr = mr; |
| new_block->resized = resized; |
| new_block->used_length = size; |
| new_block->max_length = max_size; |
| assert(max_size >= size); |
| new_block->fd = -1; |
| new_block->guest_memfd = -1; |
| new_block->page_size = qemu_real_host_page_size(); |
| new_block->host = host; |
| new_block->flags = ram_flags; |
| ram_block_add(new_block, &local_err); |
| if (local_err) { |
| g_free(new_block); |
| error_propagate(errp, local_err); |
| return NULL; |
| } |
| return new_block; |
| } |
| |
| RAMBlock *qemu_ram_alloc_from_ptr(ram_addr_t size, void *host, |
| MemoryRegion *mr, Error **errp) |
| { |
| return qemu_ram_alloc_internal(size, size, NULL, host, RAM_PREALLOC, mr, |
| errp); |
| } |
| |
| RAMBlock *qemu_ram_alloc(ram_addr_t size, uint32_t ram_flags, |
| MemoryRegion *mr, Error **errp) |
| { |
| assert((ram_flags & ~(RAM_SHARED | RAM_NORESERVE | RAM_GUEST_MEMFD)) == 0); |
| return qemu_ram_alloc_internal(size, size, NULL, NULL, ram_flags, mr, errp); |
| } |
| |
| RAMBlock *qemu_ram_alloc_resizeable(ram_addr_t size, ram_addr_t maxsz, |
| void (*resized)(const char*, |
| uint64_t length, |
| void *host), |
| MemoryRegion *mr, Error **errp) |
| { |
| return qemu_ram_alloc_internal(size, maxsz, resized, NULL, |
| RAM_RESIZEABLE, mr, errp); |
| } |
| |
| static void reclaim_ramblock(RAMBlock *block) |
| { |
| if (block->flags & RAM_PREALLOC) { |
| ; |
| } else if (xen_enabled()) { |
| xen_invalidate_map_cache_entry(block->host); |
| #ifndef _WIN32 |
| } else if (block->fd >= 0) { |
| qemu_ram_munmap(block->fd, block->host, block->max_length); |
| close(block->fd); |
| #endif |
| } else { |
| qemu_anon_ram_free(block->host, block->max_length); |
| } |
| |
| if (block->guest_memfd >= 0) { |
| close(block->guest_memfd); |
| ram_block_discard_require(false); |
| } |
| |
| g_free(block); |
| } |
| |
| void qemu_ram_free(RAMBlock *block) |
| { |
| if (!block) { |
| return; |
| } |
| |
| if (block->host) { |
| ram_block_notify_remove(block->host, block->used_length, |
| block->max_length); |
| } |
| |
| qemu_mutex_lock_ramlist(); |
| QLIST_REMOVE_RCU(block, next); |
| ram_list.mru_block = NULL; |
| /* Write list before version */ |
| smp_wmb(); |
| ram_list.version++; |
| call_rcu(block, reclaim_ramblock, rcu); |
| qemu_mutex_unlock_ramlist(); |
| } |
| |
| #ifndef _WIN32 |
| void qemu_ram_remap(ram_addr_t addr, ram_addr_t length) |
| { |
| RAMBlock *block; |
| ram_addr_t offset; |
| int flags; |
| void *area, *vaddr; |
| int prot; |
| |
| RAMBLOCK_FOREACH(block) { |
| offset = addr - block->offset; |
| if (offset < block->max_length) { |
| vaddr = ramblock_ptr(block, offset); |
| if (block->flags & RAM_PREALLOC) { |
| ; |
| } else if (xen_enabled()) { |
| abort(); |
| } else { |
| flags = MAP_FIXED; |
| flags |= block->flags & RAM_SHARED ? |
| MAP_SHARED : MAP_PRIVATE; |
| flags |= block->flags & RAM_NORESERVE ? MAP_NORESERVE : 0; |
| prot = PROT_READ; |
| prot |= block->flags & RAM_READONLY ? 0 : PROT_WRITE; |
| if (block->fd >= 0) { |
| area = mmap(vaddr, length, prot, flags, block->fd, |
| offset + block->fd_offset); |
| } else { |
| flags |= MAP_ANONYMOUS; |
| area = mmap(vaddr, length, prot, flags, -1, 0); |
| } |
| if (area != vaddr) { |
| error_report("Could not remap addr: " |
| RAM_ADDR_FMT "@" RAM_ADDR_FMT "", |
| length, addr); |
| exit(1); |
| } |
| memory_try_enable_merging(vaddr, length); |
| qemu_ram_setup_dump(vaddr, length); |
| } |
| } |
| } |
| } |
| #endif /* !_WIN32 */ |
| |
| /* |
| * Return a host pointer to guest's ram. |
| * For Xen, foreign mappings get created if they don't already exist. |
| * |
| * @block: block for the RAM to lookup (optional and may be NULL). |
| * @addr: address within the memory region. |
| * @size: pointer to requested size (optional and may be NULL). |
| * size may get modified and return a value smaller than |
| * what was requested. |
| * @lock: wether to lock the mapping in xen-mapcache until invalidated. |
| * @is_write: hint wether to map RW or RO in the xen-mapcache. |
| * (optional and may always be set to true). |
| * |
| * Called within RCU critical section. |
| */ |
| static void *qemu_ram_ptr_length(RAMBlock *block, ram_addr_t addr, |
| hwaddr *size, bool lock, |
| bool is_write) |
| { |
| hwaddr len = 0; |
| |
| if (size && *size == 0) { |
| return NULL; |
| } |
| |
| if (block == NULL) { |
| block = qemu_get_ram_block(addr); |
| addr -= block->offset; |
| } |
| if (size) { |
| *size = MIN(*size, block->max_length - addr); |
| len = *size; |
| } |
| |
| if (xen_enabled() && block->host == NULL) { |
| /* We need to check if the requested address is in the RAM |
| * because we don't want to map the entire memory in QEMU. |
| * In that case just map the requested area. |
| */ |
| if (xen_mr_is_memory(block->mr)) { |
| return xen_map_cache(block->mr, block->offset + addr, |
| len, block->offset, |
| lock, lock, is_write); |
| } |
| |
| block->host = xen_map_cache(block->mr, block->offset, |
| block->max_length, |
| block->offset, |
| 1, lock, is_write); |
| } |
| |
| return ramblock_ptr(block, addr); |
| } |
| |
| /* |
| * Return a host pointer to ram allocated with qemu_ram_alloc. |
| * This should not be used for general purpose DMA. Use address_space_map |
| * or address_space_rw instead. For local memory (e.g. video ram) that the |
| * device owns, use memory_region_get_ram_ptr. |
| * |
| * Called within RCU critical section. |
| */ |
| void *qemu_map_ram_ptr(RAMBlock *ram_block, ram_addr_t addr) |
| { |
| return qemu_ram_ptr_length(ram_block, addr, NULL, false, true); |
| } |
| |
| /* Return the offset of a hostpointer within a ramblock */ |
| ram_addr_t qemu_ram_block_host_offset(RAMBlock *rb, void *host) |
| { |
| ram_addr_t res = (uint8_t *)host - (uint8_t *)rb->host; |
| assert((uintptr_t)host >= (uintptr_t)rb->host); |
| assert(res < rb->max_length); |
| |
| return res; |
| } |
| |
| RAMBlock *qemu_ram_block_from_host(void *ptr, bool round_offset, |
| ram_addr_t *offset) |
| { |
| RAMBlock *block; |
| uint8_t *host = ptr; |
| |
| if (xen_enabled()) { |
| ram_addr_t ram_addr; |
| RCU_READ_LOCK_GUARD(); |
| ram_addr = xen_ram_addr_from_mapcache(ptr); |
| if (ram_addr == RAM_ADDR_INVALID) { |
| return NULL; |
| } |
| |
| block = qemu_get_ram_block(ram_addr); |
| if (block) { |
| *offset = ram_addr - block->offset; |
| } |
| return block; |
| } |
| |
| RCU_READ_LOCK_GUARD(); |
| block = qatomic_rcu_read(&ram_list.mru_block); |
| if (block && block->host && host - block->host < block->max_length) { |
| goto found; |
| } |
| |
| RAMBLOCK_FOREACH(block) { |
| /* This case append when the block is not mapped. */ |
| if (block->host == NULL) { |
| continue; |
| } |
| if (host - block->host < block->max_length) { |
| goto found; |
| } |
| } |
| |
| return NULL; |
| |
| found: |
| *offset = (host - block->host); |
| if (round_offset) { |
| *offset &= TARGET_PAGE_MASK; |
| } |
| return block; |
| } |
| |
| /* |
| * Finds the named RAMBlock |
| * |
| * name: The name of RAMBlock to find |
| * |
| * Returns: RAMBlock (or NULL if not found) |
| */ |
| RAMBlock *qemu_ram_block_by_name(const char *name) |
| { |
| RAMBlock *block; |
| |
| RAMBLOCK_FOREACH(block) { |
| if (!strcmp(name, block->idstr)) { |
| return block; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| /* |
| * Some of the system routines need to translate from a host pointer |
| * (typically a TLB entry) back to a ram offset. |
| */ |
| ram_addr_t qemu_ram_addr_from_host(void *ptr) |
| { |
| RAMBlock *block; |
| ram_addr_t offset; |
| |
| block = qemu_ram_block_from_host(ptr, false, &offset); |
| if (!block) { |
| return RAM_ADDR_INVALID; |
| } |
| |
| return block->offset + offset; |
| } |
| |
| ram_addr_t qemu_ram_addr_from_host_nofail(void *ptr) |
| { |
| ram_addr_t ram_addr; |
| |
| ram_addr = qemu_ram_addr_from_host(ptr); |
| if (ram_addr == RAM_ADDR_INVALID) { |
| error_report("Bad ram pointer %p", ptr); |
| abort(); |
| } |
| return ram_addr; |
| } |
| |
| static MemTxResult flatview_read(FlatView *fv, hwaddr addr, |
| MemTxAttrs attrs, void *buf, hwaddr len); |
| static MemTxResult flatview_write(FlatView *fv, hwaddr addr, MemTxAttrs attrs, |
| const void *buf, hwaddr len); |
| static bool flatview_access_valid(FlatView *fv, hwaddr addr, hwaddr len, |
| bool is_write, MemTxAttrs attrs); |
| |
| static MemTxResult subpage_read(void *opaque, hwaddr addr, uint64_t *data, |
| unsigned len, MemTxAttrs attrs) |
| { |
| subpage_t *subpage = opaque; |
| uint8_t buf[8]; |
| MemTxResult res; |
| |
| #if defined(DEBUG_SUBPAGE) |
| printf("%s: subpage %p len %u addr " HWADDR_FMT_plx "\n", __func__, |
| subpage, len, addr); |
| #endif |
| res = flatview_read(subpage->fv, addr + subpage->base, attrs, buf, len); |
| if (res) { |
| return res; |
| } |
| *data = ldn_p(buf, len); |
| return MEMTX_OK; |
| } |
| |
| static MemTxResult subpage_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned len, MemTxAttrs attrs) |
| { |
| subpage_t *subpage = opaque; |
| uint8_t buf[8]; |
| |
| #if defined(DEBUG_SUBPAGE) |
| printf("%s: subpage %p len %u addr " HWADDR_FMT_plx |
| " value %"PRIx64"\n", |
| __func__, subpage, len, addr, value); |
| #endif |
| stn_p(buf, len, value); |
| return flatview_write(subpage->fv, addr + subpage->base, attrs, buf, len); |
| } |
| |
| static bool subpage_accepts(void *opaque, hwaddr addr, |
| unsigned len, bool is_write, |
| MemTxAttrs attrs) |
| { |
| subpage_t *subpage = opaque; |
| #if defined(DEBUG_SUBPAGE) |
| printf("%s: subpage %p %c len %u addr " HWADDR_FMT_plx "\n", |
| __func__, subpage, is_write ? 'w' : 'r', len, addr); |
| #endif |
| |
| return flatview_access_valid(subpage->fv, addr + subpage->base, |
| len, is_write, attrs); |
| } |
| |
| static const MemoryRegionOps subpage_ops = { |
| .read_with_attrs = subpage_read, |
| .write_with_attrs = subpage_write, |
| .impl.min_access_size = 1, |
| .impl.max_access_size = 8, |
| .valid.min_access_size = 1, |
| .valid.max_access_size = 8, |
| .valid.accepts = subpage_accepts, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static int subpage_register(subpage_t *mmio, uint32_t start, uint32_t end, |
| uint16_t section) |
| { |
| int idx, eidx; |
| |
| if (start >= TARGET_PAGE_SIZE || end >= TARGET_PAGE_SIZE) |
| return -1; |
| idx = SUBPAGE_IDX(start); |
| eidx = SUBPAGE_IDX(end); |
| #if defined(DEBUG_SUBPAGE) |
| printf("%s: %p start %08x end %08x idx %08x eidx %08x section %d\n", |
| __func__, mmio, start, end, idx, eidx, section); |
| #endif |
| for (; idx <= eidx; idx++) { |
| mmio->sub_section[idx] = section; |
| } |
| |
| return 0; |
| } |
| |
| static subpage_t *subpage_init(FlatView *fv, hwaddr base) |
| { |
| subpage_t *mmio; |
| |
| /* mmio->sub_section is set to PHYS_SECTION_UNASSIGNED with g_malloc0 */ |
| mmio = g_malloc0(sizeof(subpage_t) + TARGET_PAGE_SIZE * sizeof(uint16_t)); |
| mmio->fv = fv; |
| mmio->base = base; |
| memory_region_init_io(&mmio->iomem, NULL, &subpage_ops, mmio, |
| NULL, TARGET_PAGE_SIZE); |
| mmio->iomem.subpage = true; |
| #if defined(DEBUG_SUBPAGE) |
| printf("%s: %p base " HWADDR_FMT_plx " len %08x\n", __func__, |
| mmio, base, TARGET_PAGE_SIZE); |
| #endif |
| |
| return mmio; |
| } |
| |
| static uint16_t dummy_section(PhysPageMap *map, FlatView *fv, MemoryRegion *mr) |
| { |
| assert(fv); |
| MemoryRegionSection section = { |
| .fv = fv, |
| .mr = mr, |
| .offset_within_address_space = 0, |
| .offset_within_region = 0, |
| .size = int128_2_64(), |
| }; |
| |
| return phys_section_add(map, §ion); |
| } |
| |
| MemoryRegionSection *iotlb_to_section(CPUState *cpu, |
| hwaddr index, MemTxAttrs attrs) |
| { |
| int asidx = cpu_asidx_from_attrs(cpu, attrs); |
| CPUAddressSpace *cpuas = &cpu->cpu_ases[asidx]; |
| AddressSpaceDispatch *d = cpuas->memory_dispatch; |
| int section_index = index & ~TARGET_PAGE_MASK; |
| MemoryRegionSection *ret; |
| |
| assert(section_index < d->map.sections_nb); |
| ret = d->map.sections + section_index; |
| assert(ret->mr); |
| assert(ret->mr->ops); |
| |
| return ret; |
| } |
| |
| static void io_mem_init(void) |
| { |
| memory_region_init_io(&io_mem_unassigned, NULL, &unassigned_mem_ops, NULL, |
| NULL, UINT64_MAX); |
| } |
| |
| AddressSpaceDispatch *address_space_dispatch_new(FlatView *fv) |
| { |
| AddressSpaceDispatch *d = g_new0(AddressSpaceDispatch, 1); |
| uint16_t n; |
| |
| n = dummy_section(&d->map, fv, &io_mem_unassigned); |
| assert(n == PHYS_SECTION_UNASSIGNED); |
| |
| d->phys_map = (PhysPageEntry) { .ptr = PHYS_MAP_NODE_NIL, .skip = 1 }; |
| |
| return d; |
| } |
| |
| void address_space_dispatch_free(AddressSpaceDispatch *d) |
| { |
| phys_sections_free(&d->map); |
| g_free(d); |
| } |
| |
| static void do_nothing(CPUState *cpu, run_on_cpu_data d) |
| { |
| } |
| |
| static void tcg_log_global_after_sync(MemoryListener *listener) |
| { |
| CPUAddressSpace *cpuas; |
| |
| /* Wait for the CPU to end the current TB. This avoids the following |
| * incorrect race: |
| * |
| * vCPU migration |
| * ---------------------- ------------------------- |
| * TLB check -> slow path |
| * notdirty_mem_write |
| * write to RAM |
| * mark dirty |
| * clear dirty flag |
| * TLB check -> fast path |
| * read memory |
| * write to RAM |
| * |
| * by pushing the migration thread's memory read after the vCPU thread has |
| * written the memory. |
| */ |
| if (replay_mode == REPLAY_MODE_NONE) { |
| /* |
| * VGA can make calls to this function while updating the screen. |
| * In record/replay mode this causes a deadlock, because |
| * run_on_cpu waits for rr mutex. Therefore no races are possible |
| * in this case and no need for making run_on_cpu when |
| * record/replay is enabled. |
| */ |
| cpuas = container_of(listener, CPUAddressSpace, tcg_as_listener); |
| run_on_cpu(cpuas->cpu, do_nothing, RUN_ON_CPU_NULL); |
| } |
| } |
| |
| static void tcg_commit_cpu(CPUState *cpu, run_on_cpu_data data) |
| { |
| CPUAddressSpace *cpuas = data.host_ptr; |
| |
| cpuas->memory_dispatch = address_space_to_dispatch(cpuas->as); |
| tlb_flush(cpu); |
| } |
| |
| static void tcg_commit(MemoryListener *listener) |
| { |
| CPUAddressSpace *cpuas; |
| CPUState *cpu; |
| |
| assert(tcg_enabled()); |
| /* since each CPU stores ram addresses in its TLB cache, we must |
| reset the modified entries */ |
| cpuas = container_of(listener, CPUAddressSpace, tcg_as_listener); |
| cpu = cpuas->cpu; |
| |
| /* |
| * Defer changes to as->memory_dispatch until the cpu is quiescent. |
| * Otherwise we race between (1) other cpu threads and (2) ongoing |
| * i/o for the current cpu thread, with data cached by mmu_lookup(). |
| * |
| * In addition, queueing the work function will kick the cpu back to |
| * the main loop, which will end the RCU critical section and reclaim |
| * the memory data structures. |
| * |
| * That said, the listener is also called during realize, before |
| * all of the tcg machinery for run-on is initialized: thus halt_cond. |
| */ |
| if (cpu->halt_cond) { |
| async_run_on_cpu(cpu, tcg_commit_cpu, RUN_ON_CPU_HOST_PTR(cpuas)); |
| } else { |
| tcg_commit_cpu(cpu, RUN_ON_CPU_HOST_PTR(cpuas)); |
| } |
| } |
| |
| static void memory_map_init(void) |
| { |
| system_memory = g_malloc(sizeof(*system_memory)); |
| |
| memory_region_init(system_memory, NULL, "system", UINT64_MAX); |
| address_space_init(&address_space_memory, system_memory, "memory"); |
| |
| system_io = g_malloc(sizeof(*system_io)); |
| memory_region_init_io(system_io, NULL, &unassigned_io_ops, NULL, "io", |
| 65536); |
| address_space_init(&address_space_io, system_io, "I/O"); |
| } |
| |
| MemoryRegion *get_system_memory(void) |
| { |
| return system_memory; |
| } |
| |
| MemoryRegion *get_system_io(void) |
| { |
| return system_io; |
| } |
| |
| static void invalidate_and_set_dirty(MemoryRegion *mr, hwaddr addr, |
| hwaddr length) |
| { |
| uint8_t dirty_log_mask = memory_region_get_dirty_log_mask(mr); |
| ram_addr_t ramaddr = memory_region_get_ram_addr(mr); |
| |
| /* We know we're only called for RAM MemoryRegions */ |
| assert(ramaddr != RAM_ADDR_INVALID); |
| addr += ramaddr; |
| |
| /* No early return if dirty_log_mask is or becomes 0, because |
| * cpu_physical_memory_set_dirty_range will still call |
| * xen_modified_memory. |
| */ |
| if (dirty_log_mask) { |
| dirty_log_mask = |
| cpu_physical_memory_range_includes_clean(addr, length, dirty_log_mask); |
| } |
| if (dirty_log_mask & (1 << DIRTY_MEMORY_CODE)) { |
| assert(tcg_enabled()); |
| tb_invalidate_phys_range(addr, addr + length - 1); |
| dirty_log_mask &= ~(1 << DIRTY_MEMORY_CODE); |
| } |
| cpu_physical_memory_set_dirty_range(addr, length, dirty_log_mask); |
| } |
| |
| void memory_region_flush_rom_device(MemoryRegion *mr, hwaddr addr, hwaddr size) |
| { |
| /* |
| * In principle this function would work on other memory region types too, |
| * but the ROM device use case is the only one where this operation is |
| * necessary. Other memory regions should use the |
| * address_space_read/write() APIs. |
| */ |
| assert(memory_region_is_romd(mr)); |
| |
| invalidate_and_set_dirty(mr, addr, size); |
| } |
| |
| int memory_access_size(MemoryRegion *mr, unsigned l, hwaddr addr) |
| { |
| unsigned access_size_max = mr->ops->valid.max_access_size; |
| |
| /* Regions are assumed to support 1-4 byte accesses unless |
| otherwise specified. */ |
| if (access_size_max == 0) { |
| access_size_max = 4; |
| } |
| |
| /* Bound the maximum access by the alignment of the address. */ |
| if (!mr->ops->impl.unaligned) { |
| unsigned align_size_max = addr & -addr; |
| if (align_size_max != 0 && align_size_max < access_size_max) { |
| access_size_max = align_size_max; |
| } |
| } |
| |
| /* Don't attempt accesses larger than the maximum. */ |
| if (l > access_size_max) { |
| l = access_size_max; |
| } |
| l = pow2floor(l); |
| |
| return l; |
| } |
| |
| bool prepare_mmio_access(MemoryRegion *mr) |
| { |
| bool release_lock = false; |
| |
| if (!bql_locked()) { |
| bql_lock(); |
| release_lock = true; |
| } |
| if (mr->flush_coalesced_mmio) { |
| qemu_flush_coalesced_mmio_buffer(); |
| } |
| |
| return release_lock; |
| } |
| |
| /** |
| * flatview_access_allowed |
| * @mr: #MemoryRegion to be accessed |
| * @attrs: memory transaction attributes |
| * @addr: address within that memory region |
| * @len: the number of bytes to access |
| * |
| * Check if a memory transaction is allowed. |
| * |
| * Returns: true if transaction is allowed, false if denied. |
| */ |
| static bool flatview_access_allowed(MemoryRegion *mr, MemTxAttrs attrs, |
| hwaddr addr, hwaddr len) |
| { |
| if (likely(!attrs.memory)) { |
| return true; |
| } |
| if (memory_region_is_ram(mr)) { |
| return true; |
| } |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "Invalid access to non-RAM device at " |
| "addr 0x%" HWADDR_PRIX ", size %" HWADDR_PRIu ", " |
| "region '%s'\n", addr, len, memory_region_name(mr)); |
| return false; |
| } |
| |
| static MemTxResult flatview_write_continue_step(MemTxAttrs attrs, |
| const uint8_t *buf, |
| hwaddr len, hwaddr mr_addr, |
| hwaddr *l, MemoryRegion *mr) |
| { |
| if (!flatview_access_allowed(mr, attrs, mr_addr, *l)) { |
| return MEMTX_ACCESS_ERROR; |
| } |
| |
| if (!memory_access_is_direct(mr, true)) { |
| uint64_t val; |
| MemTxResult result; |
| bool release_lock = prepare_mmio_access(mr); |
| |
| *l = memory_access_size(mr, *l, mr_addr); |
| /* |
| * XXX: could force current_cpu to NULL to avoid |
| * potential bugs |
| */ |
| |
| /* |
| * Assure Coverity (and ourselves) that we are not going to OVERRUN |
| * the buffer by following ldn_he_p(). |
| */ |
| #ifdef QEMU_STATIC_ANALYSIS |
| assert((*l == 1 && len >= 1) || |
| (*l == 2 && len >= 2) || |
| (*l == 4 && len >= 4) || |
| (*l == 8 && len >= 8)); |
| #endif |
| val = ldn_he_p(buf, *l); |
| result = memory_region_dispatch_write(mr, mr_addr, val, |
| size_memop(*l), attrs); |
| if (release_lock) { |
| bql_unlock(); |
| } |
| |
| return result; |
| } else { |
| /* RAM case */ |
| uint8_t *ram_ptr = qemu_ram_ptr_length(mr->ram_block, mr_addr, l, |
| false, true); |
| |
| memmove(ram_ptr, buf, *l); |
| invalidate_and_set_dirty(mr, mr_addr, *l); |
| |
| return MEMTX_OK; |
| } |
| } |
| |
| /* Called within RCU critical section. */ |
| static MemTxResult flatview_write_continue(FlatView *fv, hwaddr addr, |
| MemTxAttrs attrs, |
| const void *ptr, |
| hwaddr len, hwaddr mr_addr, |
| hwaddr l, MemoryRegion *mr) |
| { |
| MemTxResult result = MEMTX_OK; |
| const uint8_t *buf = ptr; |
| |
| for (;;) { |
| result |= flatview_write_continue_step(attrs, buf, len, mr_addr, &l, |
| mr); |
| |
| len -= l; |
| buf += l; |
| addr += l; |
| |
| if (!len) { |
| break; |
| } |
| |
| l = len; |
| mr = flatview_translate(fv, addr, &mr_addr, &l, true, attrs); |
| } |
| |
| return result; |
| } |
| |
| /* Called from RCU critical section. */ |
| static MemTxResult flatview_write(FlatView *fv, hwaddr addr, MemTxAttrs attrs, |
| const void *buf, hwaddr len) |
| { |
| hwaddr l; |
| hwaddr mr_addr; |
| MemoryRegion *mr; |
| |
| l = len; |
| mr = flatview_translate(fv, addr, &mr_addr, &l, true, attrs); |
| if (!flatview_access_allowed(mr, attrs, addr, len)) { |
| return MEMTX_ACCESS_ERROR; |
| } |
| return flatview_write_continue(fv, addr, attrs, buf, len, |
| mr_addr, l, mr); |
| } |
| |
| static MemTxResult flatview_read_continue_step(MemTxAttrs attrs, uint8_t *buf, |
| hwaddr len, hwaddr mr_addr, |
| hwaddr *l, |
| MemoryRegion *mr) |
| { |
| if (!flatview_access_allowed(mr, attrs, mr_addr, *l)) { |
| return MEMTX_ACCESS_ERROR; |
| } |
| |
| if (!memory_access_is_direct(mr, false)) { |
| /* I/O case */ |
| uint64_t val; |
| MemTxResult result; |
| bool release_lock = prepare_mmio_access(mr); |
| |
| *l = memory_access_size(mr, *l, mr_addr); |
| result = memory_region_dispatch_read(mr, mr_addr, &val, size_memop(*l), |
| attrs); |
| |
| /* |
| * Assure Coverity (and ourselves) that we are not going to OVERRUN |
| * the buffer by following stn_he_p(). |
| */ |
| #ifdef QEMU_STATIC_ANALYSIS |
| assert((*l == 1 && len >= 1) || |
| (*l == 2 && len >= 2) || |
| (*l == 4 && len >= 4) || |
| (*l == 8 && len >= 8)); |
| #endif |
| stn_he_p(buf, *l, val); |
| |
| if (release_lock) { |
| bql_unlock(); |
| } |
| return result; |
| } else { |
| /* RAM case */ |
| uint8_t *ram_ptr = qemu_ram_ptr_length(mr->ram_block, mr_addr, l, |
| false, false); |
| |
| memcpy(buf, ram_ptr, *l); |
| |
| return MEMTX_OK; |
| } |
| } |
| |
| /* Called within RCU critical section. */ |
| MemTxResult flatview_read_continue(FlatView *fv, hwaddr addr, |
| MemTxAttrs attrs, void *ptr, |
| hwaddr len, hwaddr mr_addr, hwaddr l, |
| MemoryRegion *mr) |
| { |
| MemTxResult result = MEMTX_OK; |
| uint8_t *buf = ptr; |
| |
| fuzz_dma_read_cb(addr, len, mr); |
| for (;;) { |
| result |= flatview_read_continue_step(attrs, buf, len, mr_addr, &l, mr); |
| |
| len -= l; |
| buf += l; |
| addr += l; |
| |
| if (!len) { |
| break; |
| } |
| |
| l = len; |
| mr = flatview_translate(fv, addr, &mr_addr, &l, false, attrs); |
| } |
| |
| return result; |
| } |
| |
| /* Called from RCU critical section. */ |
| static MemTxResult flatview_read(FlatView *fv, hwaddr addr, |
| MemTxAttrs attrs, void *buf, hwaddr len) |
| { |
| hwaddr l; |
| hwaddr mr_addr; |
| MemoryRegion *mr; |
| |
| l = len; |
| mr = flatview_translate(fv, addr, &mr_addr, &l, false, attrs); |
| if (!flatview_access_allowed(mr, attrs, addr, len)) { |
| return MEMTX_ACCESS_ERROR; |
| } |
| return flatview_read_continue(fv, addr, attrs, buf, len, |
| mr_addr, l, mr); |
| } |
| |
| MemTxResult address_space_read_full(AddressSpace *as, hwaddr addr, |
| MemTxAttrs attrs, void *buf, hwaddr len) |
| { |
| MemTxResult result = MEMTX_OK; |
| FlatView *fv; |
| |
| if (len > 0) { |
| RCU_READ_LOCK_GUARD(); |
| fv = address_space_to_flatview(as); |
| result = flatview_read(fv, addr, attrs, buf, len); |
| } |
| |
| return result; |
| } |
| |
| MemTxResult address_space_write(AddressSpace *as, hwaddr addr, |
| MemTxAttrs attrs, |
| const void *buf, hwaddr len) |
| { |
| MemTxResult result = MEMTX_OK; |
| FlatView *fv; |
| |
| if (len > 0) { |
| RCU_READ_LOCK_GUARD(); |
| fv = address_space_to_flatview(as); |
| result = flatview_write(fv, addr, attrs, buf, len); |
| } |
| |
| return result; |
| } |
| |
| MemTxResult address_space_rw(AddressSpace *as, hwaddr addr, MemTxAttrs attrs, |
| void *buf, hwaddr len, bool is_write) |
| { |
| if (is_write) { |
| return address_space_write(as, addr, attrs, buf, len); |
| } else { |
| return address_space_read_full(as, addr, attrs, buf, len); |
| } |
| } |
| |
| MemTxResult address_space_set(AddressSpace *as, hwaddr addr, |
| uint8_t c, hwaddr len, MemTxAttrs attrs) |
| { |
| #define FILLBUF_SIZE 512 |
| uint8_t fillbuf[FILLBUF_SIZE]; |
| int l; |
| MemTxResult error = MEMTX_OK; |
| |
| memset(fillbuf, c, FILLBUF_SIZE); |
| while (len > 0) { |
| l = len < FILLBUF_SIZE ? len : FILLBUF_SIZE; |
| error |= address_space_write(as, addr, attrs, fillbuf, l); |
| len -= l; |
| addr += l; |
| } |
| |
| return error; |
| } |
| |
| void cpu_physical_memory_rw(hwaddr addr, void *buf, |
| hwaddr len, bool is_write) |
| { |
| address_space_rw(&address_space_memory, addr, MEMTXATTRS_UNSPECIFIED, |
| buf, len, is_write); |
| } |
| |
| enum write_rom_type { |
| WRITE_DATA, |
| FLUSH_CACHE, |
| }; |
| |
| static inline MemTxResult address_space_write_rom_internal(AddressSpace *as, |
| hwaddr addr, |
| MemTxAttrs attrs, |
| const void *ptr, |
| hwaddr len, |
| enum write_rom_type type) |
| { |
| hwaddr l; |
| uint8_t *ram_ptr; |
| hwaddr addr1; |
| MemoryRegion *mr; |
| const uint8_t *buf = ptr; |
| |
| RCU_READ_LOCK_GUARD(); |
| while (len > 0) { |
| l = len; |
| mr = address_space_translate(as, addr, &addr1, &l, true, attrs); |
| |
| if (!(memory_region_is_ram(mr) || |
| memory_region_is_romd(mr))) { |
| l = memory_access_size(mr, l, addr1); |
| } else { |
| /* ROM/RAM case */ |
| ram_ptr = qemu_map_ram_ptr(mr->ram_block, addr1); |
| switch (type) { |
| case WRITE_DATA: |
| memcpy(ram_ptr, buf, l); |
| invalidate_and_set_dirty(mr, addr1, l); |
| break; |
| case FLUSH_CACHE: |
| flush_idcache_range((uintptr_t)ram_ptr, (uintptr_t)ram_ptr, l); |
| break; |
| } |
| } |
| len -= l; |
| buf += l; |
| addr += l; |
| } |
| return MEMTX_OK; |
| } |
| |
| /* used for ROM loading : can write in RAM and ROM */ |
| MemTxResult address_space_write_rom(AddressSpace *as, hwaddr addr, |
| MemTxAttrs attrs, |
| const void *buf, hwaddr len) |
| { |
| return address_space_write_rom_internal(as, addr, attrs, |
| buf, len, WRITE_DATA); |
| } |
| |
| void cpu_flush_icache_range(hwaddr start, hwaddr len) |
| { |
| /* |
| * This function should do the same thing as an icache flush that was |
| * triggered from within the guest. For TCG we are always cache coherent, |
| * so there is no need to flush anything. For KVM / Xen we need to flush |
| * the host's instruction cache at least. |
| */ |
| if (tcg_enabled()) { |
| return; |
| } |
| |
| address_space_write_rom_internal(&address_space_memory, |
| start, MEMTXATTRS_UNSPECIFIED, |
| NULL, len, FLUSH_CACHE); |
| } |
| |
| /* |
| * A magic value stored in the first 8 bytes of the bounce buffer struct. Used |
| * to detect illegal pointers passed to address_space_unmap. |
| */ |
| #define BOUNCE_BUFFER_MAGIC 0xb4017ceb4ffe12ed |
| |
| typedef struct { |
| uint64_t magic; |
| MemoryRegion *mr; |
| hwaddr addr; |
| size_t len; |
| uint8_t buffer[]; |
| } BounceBuffer; |
| |
| static void |
| address_space_unregister_map_client_do(AddressSpaceMapClient *client) |
| { |
| QLIST_REMOVE(client, link); |
| g_free(client); |
| } |
| |
| static void address_space_notify_map_clients_locked(AddressSpace *as) |
| { |
| AddressSpaceMapClient *client; |
| |
| while (!QLIST_EMPTY(&as->map_client_list)) { |
| client = QLIST_FIRST(&as->map_client_list); |
| qemu_bh_schedule(client->bh); |
| address_space_unregister_map_client_do(client); |
| } |
| } |
| |
| void address_space_register_map_client(AddressSpace *as, QEMUBH *bh) |
| { |
| AddressSpaceMapClient *client = g_malloc(sizeof(*client)); |
| |
| QEMU_LOCK_GUARD(&as->map_client_list_lock); |
| client->bh = bh; |
| QLIST_INSERT_HEAD(&as->map_client_list, client, link); |
| /* Write map_client_list before reading bounce_buffer_size. */ |
| smp_mb(); |
| if (qatomic_read(&as->bounce_buffer_size) < as->max_bounce_buffer_size) { |
| address_space_notify_map_clients_locked(as); |
| } |
| } |
| |
| void cpu_exec_init_all(void) |
| { |
| qemu_mutex_init(&ram_list.mutex); |
| /* The data structures we set up here depend on knowing the page size, |
| * so no more changes can be made after this point. |
| * In an ideal world, nothing we did before we had finished the |
| * machine setup would care about the target page size, and we could |
| * do this much later, rather than requiring board models to state |
| * up front what their requirements are. |
| */ |
| finalize_target_page_bits(); |
| io_mem_init(); |
| memory_map_init(); |
| } |
| |
| void address_space_unregister_map_client(AddressSpace *as, QEMUBH *bh) |
| { |
| AddressSpaceMapClient *client; |
| |
| QEMU_LOCK_GUARD(&as->map_client_list_lock); |
| QLIST_FOREACH(client, &as->map_client_list, link) { |
| if (client->bh == bh) { |
| address_space_unregister_map_client_do(client); |
| break; |
| } |
| } |
| } |
| |
| static void address_space_notify_map_clients(AddressSpace *as) |
| { |
| QEMU_LOCK_GUARD(&as->map_client_list_lock); |
| address_space_notify_map_clients_locked(as); |
| } |
| |
| static bool flatview_access_valid(FlatView *fv, hwaddr addr, hwaddr len, |
| bool is_write, MemTxAttrs attrs) |
| { |
| MemoryRegion *mr; |
| hwaddr l, xlat; |
| |
| while (len > 0) { |
| l = len; |
| mr = flatview_translate(fv, addr, &xlat, &l, is_write, attrs); |
| if (!memory_access_is_direct(mr, is_write)) { |
| l = memory_access_size(mr, l, addr); |
| if (!memory_region_access_valid(mr, xlat, l, is_write, attrs)) { |
| return false; |
| } |
| } |
| |
| len -= l; |
| addr += l; |
| } |
| return true; |
| } |
| |
| bool address_space_access_valid(AddressSpace *as, hwaddr addr, |
| hwaddr len, bool is_write, |
| MemTxAttrs attrs) |
| { |
| FlatView *fv; |
| |
| RCU_READ_LOCK_GUARD(); |
| fv = address_space_to_flatview(as); |
| return flatview_access_valid(fv, addr, len, is_write, attrs); |
| } |
| |
| static hwaddr |
| flatview_extend_translation(FlatView *fv, hwaddr addr, |
| hwaddr target_len, |
| MemoryRegion *mr, hwaddr base, hwaddr len, |
| bool is_write, MemTxAttrs attrs) |
| { |
| hwaddr done = 0; |
| hwaddr xlat; |
| MemoryRegion *this_mr; |
| |
| for (;;) { |
| target_len -= len; |
| addr += len; |
| done += len; |
| if (target_len == 0) { |
| return done; |
| } |
| |
| len = target_len; |
| this_mr = flatview_translate(fv, addr, &xlat, |
| &len, is_write, attrs); |
| if (this_mr != mr || xlat != base + done) { |
| return done; |
| } |
| } |
| } |
| |
| /* Map a physical memory region into a host virtual address. |
| * May map a subset of the requested range, given by and returned in *plen. |
| * May return NULL if resources needed to perform the mapping are exhausted. |
| * Use only for reads OR writes - not for read-modify-write operations. |
| * Use address_space_register_map_client() to know when retrying the map |
| * operation is likely to succeed. |
| */ |
| void *address_space_map(AddressSpace *as, |
| hwaddr addr, |
| hwaddr *plen, |
| bool is_write, |
| MemTxAttrs attrs) |
| { |
| hwaddr len = *plen; |
| hwaddr l, xlat; |
| MemoryRegion *mr; |
| FlatView *fv; |
| |
| trace_address_space_map(as, addr, len, is_write, *(uint32_t *) &attrs); |
| |
| if (len == 0) { |
| return NULL; |
| } |
| |
| l = len; |
| RCU_READ_LOCK_GUARD(); |
| fv = address_space_to_flatview(as); |
| mr = flatview_translate(fv, addr, &xlat, &l, is_write, attrs); |
| |
| if (!memory_access_is_direct(mr, is_write)) { |
| size_t used = qatomic_read(&as->bounce_buffer_size); |
| for (;;) { |
| hwaddr alloc = MIN(as->max_bounce_buffer_size - used, l); |
| size_t new_size = used + alloc; |
| size_t actual = |
| qatomic_cmpxchg(&as->bounce_buffer_size, used, new_size); |
| if (actual == used) { |
| l = alloc; |
| break; |
| } |
| used = actual; |
| } |
| |
| if (l == 0) { |
| *plen = 0; |
| return NULL; |
| } |
| |
| BounceBuffer *bounce = g_malloc0(l + sizeof(BounceBuffer)); |
| bounce->magic = BOUNCE_BUFFER_MAGIC; |
| memory_region_ref(mr); |
| bounce->mr = mr; |
| bounce->addr = addr; |
| bounce->len = l; |
| |
| if (!is_write) { |
| flatview_read(fv, addr, attrs, |
| bounce->buffer, l); |
| } |
| |
| *plen = l; |
| return bounce->buffer; |
| } |
| |
| memory_region_ref(mr); |
| *plen = flatview_extend_translation(fv, addr, len, mr, xlat, |
| l, is_write, attrs); |
| fuzz_dma_read_cb(addr, *plen, mr); |
| return qemu_ram_ptr_length(mr->ram_block, xlat, plen, true, is_write); |
| } |
| |
| /* Unmaps a memory region previously mapped by address_space_map(). |
| * Will also mark the memory as dirty if is_write is true. access_len gives |
| * the amount of memory that was actually read or written by the caller. |
| */ |
| void address_space_unmap(AddressSpace *as, void *buffer, hwaddr len, |
| bool is_write, hwaddr access_len) |
| { |
| MemoryRegion *mr; |
| ram_addr_t addr1; |
| |
| mr = memory_region_from_host(buffer, &addr1); |
| if (mr != NULL) { |
| if (is_write) { |
| invalidate_and_set_dirty(mr, addr1, access_len); |
| } |
| if (xen_enabled()) { |
| xen_invalidate_map_cache_entry(buffer); |
| } |
| memory_region_unref(mr); |
| return; |
| } |
| |
| |
| BounceBuffer *bounce = container_of(buffer, BounceBuffer, buffer); |
| assert(bounce->magic == BOUNCE_BUFFER_MAGIC); |
| |
| if (is_write) { |
| address_space_write(as, bounce->addr, MEMTXATTRS_UNSPECIFIED, |
| bounce->buffer, access_len); |
| } |
| |
| qatomic_sub(&as->bounce_buffer_size, bounce->len); |
| bounce->magic = ~BOUNCE_BUFFER_MAGIC; |
| memory_region_unref(bounce->mr); |
| g_free(bounce); |
| /* Write bounce_buffer_size before reading map_client_list. */ |
| smp_mb(); |
| address_space_notify_map_clients(as); |
| } |
| |
| void *cpu_physical_memory_map(hwaddr addr, |
| hwaddr *plen, |
| bool is_write) |
| { |
| return address_space_map(&address_space_memory, addr, plen, is_write, |
| MEMTXATTRS_UNSPECIFIED); |
| } |
| |
| void cpu_physical_memory_unmap(void *buffer, hwaddr len, |
| bool is_write, hwaddr access_len) |
| { |
| return address_space_unmap(&address_space_memory, buffer, len, is_write, access_len); |
| } |
| |
| #define ARG1_DECL AddressSpace *as |
| #define ARG1 as |
| #define SUFFIX |
| #define TRANSLATE(...) address_space_translate(as, __VA_ARGS__) |
| #define RCU_READ_LOCK(...) rcu_read_lock() |
| #define RCU_READ_UNLOCK(...) rcu_read_unlock() |
| #include "memory_ldst.c.inc" |
| |
| int64_t address_space_cache_init(MemoryRegionCache *cache, |
| AddressSpace *as, |
| hwaddr addr, |
| hwaddr len, |
| bool is_write) |
| { |
| AddressSpaceDispatch *d; |
| hwaddr l; |
| MemoryRegion *mr; |
| Int128 diff; |
| |
| assert(len > 0); |
| |
| l = len; |
| cache->fv = address_space_get_flatview(as); |
| d = flatview_to_dispatch(cache->fv); |
| cache->mrs = *address_space_translate_internal(d, addr, &cache->xlat, &l, true); |
| |
| /* |
| * cache->xlat is now relative to cache->mrs.mr, not to the section itself. |
| * Take that into account to compute how many bytes are there between |
| * cache->xlat and the end of the section. |
| */ |
| diff = int128_sub(cache->mrs.size, |
| int128_make64(cache->xlat - cache->mrs.offset_within_region)); |
| l = int128_get64(int128_min(diff, int128_make64(l))); |
| |
| mr = cache->mrs.mr; |
| memory_region_ref(mr); |
| if (memory_access_is_direct(mr, is_write)) { |
| /* We don't care about the memory attributes here as we're only |
| * doing this if we found actual RAM, which behaves the same |
| * regardless of attributes; so UNSPECIFIED is fine. |
| */ |
| l = flatview_extend_translation(cache->fv, addr, len, mr, |
| cache->xlat, l, is_write, |
| MEMTXATTRS_UNSPECIFIED); |
| cache->ptr = qemu_ram_ptr_length(mr->ram_block, cache->xlat, &l, true, |
| is_write); |
| } else { |
| cache->ptr = NULL; |
| } |
| |
| cache->len = l; |
| cache->is_write = is_write; |
| return l; |
| } |
| |
| void address_space_cache_invalidate(MemoryRegionCache *cache, |
| hwaddr addr, |
| hwaddr access_len) |
| { |
| assert(cache->is_write); |
| if (likely(cache->ptr)) { |
| invalidate_and_set_dirty(cache->mrs.mr, addr + cache->xlat, access_len); |
| } |
| } |
| |
| void address_space_cache_destroy(MemoryRegionCache *cache) |
| { |
| if (!cache->mrs.mr) { |
| return; |
| } |
| |
| if (xen_enabled()) { |
| xen_invalidate_map_cache_entry(cache->ptr); |
| } |
| memory_region_unref(cache->mrs.mr); |
| flatview_unref(cache->fv); |
| cache->mrs.mr = NULL; |
| cache->fv = NULL; |
| } |
| |
| /* Called from RCU critical section. This function has the same |
| * semantics as address_space_translate, but it only works on a |
| * predefined range of a MemoryRegion that was mapped with |
| * address_space_cache_init. |
| */ |
| static inline MemoryRegion *address_space_translate_cached( |
| MemoryRegionCache *cache, hwaddr addr, hwaddr *xlat, |
| hwaddr *plen, bool is_write, MemTxAttrs attrs) |
| { |
| MemoryRegionSection section; |
| MemoryRegion *mr; |
| IOMMUMemoryRegion *iommu_mr; |
| AddressSpace *target_as; |
| |
| assert(!cache->ptr); |
| *xlat = addr + cache->xlat; |
| |
| mr = cache->mrs.mr; |
| iommu_mr = memory_region_get_iommu(mr); |
| if (!iommu_mr) { |
| /* MMIO region. */ |
| return mr; |
| } |
| |
| section = address_space_translate_iommu(iommu_mr, xlat, plen, |
| NULL, is_write, true, |
| &target_as, attrs); |
| return section.mr; |
| } |
| |
| /* Called within RCU critical section. */ |
| static MemTxResult address_space_write_continue_cached(MemTxAttrs attrs, |
| const void *ptr, |
| hwaddr len, |
| hwaddr mr_addr, |
| hwaddr l, |
| MemoryRegion *mr) |
| { |
| MemTxResult result = MEMTX_OK; |
| const uint8_t *buf = ptr; |
| |
| for (;;) { |
| result |= flatview_write_continue_step(attrs, buf, len, mr_addr, &l, |
| mr); |
| |
| len -= l; |
| buf += l; |
| mr_addr += l; |
| |
| if (!len) { |
| break; |
| } |
| |
| l = len; |
| } |
| |
| return result; |
| } |
| |
| /* Called within RCU critical section. */ |
| static MemTxResult address_space_read_continue_cached(MemTxAttrs attrs, |
| void *ptr, hwaddr len, |
| hwaddr mr_addr, hwaddr l, |
| MemoryRegion *mr) |
| { |
| MemTxResult result = MEMTX_OK; |
| uint8_t *buf = ptr; |
| |
| for (;;) { |
| result |= flatview_read_continue_step(attrs, buf, len, mr_addr, &l, mr); |
| len -= l; |
| buf += l; |
| mr_addr += l; |
| |
| if (!len) { |
| break; |
| } |
| l = len; |
| } |
| |
| return result; |
| } |
| |
| /* Called from RCU critical section. address_space_read_cached uses this |
| * out of line function when the target is an MMIO or IOMMU region. |
| */ |
| MemTxResult |
| address_space_read_cached_slow(MemoryRegionCache *cache, hwaddr addr, |
| void *buf, hwaddr len) |
| { |
| hwaddr mr_addr, l; |
| MemoryRegion *mr; |
| |
| l = len; |
| mr = address_space_translate_cached(cache, addr, &mr_addr, &l, false, |
| MEMTXATTRS_UNSPECIFIED); |
| return address_space_read_continue_cached(MEMTXATTRS_UNSPECIFIED, |
| buf, len, mr_addr, l, mr); |
| } |
| |
| /* Called from RCU critical section. address_space_write_cached uses this |
| * out of line function when the target is an MMIO or IOMMU region. |
| */ |
| MemTxResult |
| address_space_write_cached_slow(MemoryRegionCache *cache, hwaddr addr, |
| const void *buf, hwaddr len) |
| { |
| hwaddr mr_addr, l; |
| MemoryRegion *mr; |
| |
| l = len; |
| mr = address_space_translate_cached(cache, addr, &mr_addr, &l, true, |
| MEMTXATTRS_UNSPECIFIED); |
| return address_space_write_continue_cached(MEMTXATTRS_UNSPECIFIED, |
| buf, len, mr_addr, l, mr); |
| } |
| |
| #define ARG1_DECL MemoryRegionCache *cache |
| #define ARG1 cache |
| #define SUFFIX _cached_slow |
| #define TRANSLATE(...) address_space_translate_cached(cache, __VA_ARGS__) |
| #define RCU_READ_LOCK() ((void)0) |
| #define RCU_READ_UNLOCK() ((void)0) |
| #include "memory_ldst.c.inc" |
| |
| /* virtual memory access for debug (includes writing to ROM) */ |
| int cpu_memory_rw_debug(CPUState *cpu, vaddr addr, |
| void *ptr, size_t len, bool is_write) |
| { |
| hwaddr phys_addr; |
| vaddr l, page; |
| uint8_t *buf = ptr; |
| |
| cpu_synchronize_state(cpu); |
| while (len > 0) { |
| int asidx; |
| MemTxAttrs attrs; |
| MemTxResult res; |
| |
| page = addr & TARGET_PAGE_MASK; |
| phys_addr = cpu_get_phys_page_attrs_debug(cpu, page, &attrs); |
| asidx = cpu_asidx_from_attrs(cpu, attrs); |
| /* if no physical page mapped, return an error */ |
| if (phys_addr == -1) |
| return -1; |
| l = (page + TARGET_PAGE_SIZE) - addr; |
| if (l > len) |
| l = len; |
| phys_addr += (addr & ~TARGET_PAGE_MASK); |
| if (is_write) { |
| res = address_space_write_rom(cpu->cpu_ases[asidx].as, phys_addr, |
| attrs, buf, l); |
| } else { |
| res = address_space_read(cpu->cpu_ases[asidx].as, phys_addr, |
| attrs, buf, l); |
| } |
| if (res != MEMTX_OK) { |
| return -1; |
| } |
| len -= l; |
| buf += l; |
| addr += l; |
| } |
| return 0; |
| } |
| |
| bool cpu_physical_memory_is_io(hwaddr phys_addr) |
| { |
| MemoryRegion*mr; |
| hwaddr l = 1; |
| |
| RCU_READ_LOCK_GUARD(); |
| mr = address_space_translate(&address_space_memory, |
| phys_addr, &phys_addr, &l, false, |
| MEMTXATTRS_UNSPECIFIED); |
| |
| return !(memory_region_is_ram(mr) || memory_region_is_romd(mr)); |
| } |
| |
| int qemu_ram_foreach_block(RAMBlockIterFunc func, void *opaque) |
| { |
| RAMBlock *block; |
| int ret = 0; |
| |
| RCU_READ_LOCK_GUARD(); |
| RAMBLOCK_FOREACH(block) { |
| ret = func(block, opaque); |
| if (ret) { |
| break; |
| } |
| } |
| return ret; |
| } |
| |
| /* |
| * Unmap pages of memory from start to start+length such that |
| * they a) read as 0, b) Trigger whatever fault mechanism |
| * the OS provides for postcopy. |
| * The pages must be unmapped by the end of the function. |
| * Returns: 0 on success, none-0 on failure |
| * |
| */ |
| int ram_block_discard_range(RAMBlock *rb, uint64_t start, size_t length) |
| { |
| int ret = -1; |
| |
| uint8_t *host_startaddr = rb->host + start; |
| |
| if (!QEMU_PTR_IS_ALIGNED(host_startaddr, rb->page_size)) { |
| error_report("%s: Unaligned start address: %p", |
| __func__, host_startaddr); |
| goto err; |
| } |
| |
| if ((start + length) <= rb->max_length) { |
| bool need_madvise, need_fallocate; |
| if (!QEMU_IS_ALIGNED(length, rb->page_size)) { |
| error_report("%s: Unaligned length: %zx", __func__, length); |
| goto err; |
| } |
| |
| errno = ENOTSUP; /* If we are missing MADVISE etc */ |
| |
| /* The logic here is messy; |
| * madvise DONTNEED fails for hugepages |
| * fallocate works on hugepages and shmem |
| * shared anonymous memory requires madvise REMOVE |
| */ |
| need_madvise = (rb->page_size == qemu_real_host_page_size()); |
| need_fallocate = rb->fd != -1; |
| if (need_fallocate) { |
| /* For a file, this causes the area of the file to be zero'd |
| * if read, and for hugetlbfs also causes it to be unmapped |
| * so a userfault will trigger. |
| */ |
| #ifdef CONFIG_FALLOCATE_PUNCH_HOLE |
| /* |
| * fallocate() will fail with readonly files. Let's print a |
| * proper error message. |
| */ |
| if (rb->flags & RAM_READONLY_FD) { |
| error_report("%s: Discarding RAM with readonly files is not" |
| " supported", __func__); |
| goto err; |
| |
| } |
| /* |
| * We'll discard data from the actual file, even though we only |
| * have a MAP_PRIVATE mapping, possibly messing with other |
| * MAP_PRIVATE/MAP_SHARED mappings. There is no easy way to |
| * change that behavior whithout violating the promised |
| * semantics of ram_block_discard_range(). |
| * |
| * Only warn, because it works as long as nobody else uses that |
| * file. |
| */ |
| if (!qemu_ram_is_shared(rb)) { |
| warn_report_once("%s: Discarding RAM" |
| " in private file mappings is possibly" |
| " dangerous, because it will modify the" |
| " underlying file and will affect other" |
| " users of the file", __func__); |
| } |
| |
| ret = fallocate(rb->fd, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE, |
| start, length); |
| if (ret) { |
| ret = -errno; |
| error_report("%s: Failed to fallocate %s:%" PRIx64 " +%zx (%d)", |
| __func__, rb->idstr, start, length, ret); |
| goto err; |
| } |
| #else |
| ret = -ENOSYS; |
| error_report("%s: fallocate not available/file" |
| "%s:%" PRIx64 " +%zx (%d)", |
| __func__, rb->idstr, start, length, ret); |
| goto err; |
| #endif |
| } |
| if (need_madvise) { |
| /* For normal RAM this causes it to be unmapped, |
| * for shared memory it causes the local mapping to disappear |
| * and to fall back on the file contents (which we just |
| * fallocate'd away). |
| */ |
| #if defined(CONFIG_MADVISE) |
| if (qemu_ram_is_shared(rb) && rb->fd < 0) { |
| ret = madvise(host_startaddr, length, QEMU_MADV_REMOVE); |
| } else { |
| ret = madvise(host_startaddr, length, QEMU_MADV_DONTNEED); |
| } |
| if (ret) { |
| ret = -errno; |
| error_report("%s: Failed to discard range " |
| "%s:%" PRIx64 " +%zx (%d)", |
| __func__, rb->idstr, start, length, ret); |
| goto err; |
| } |
| #else |
| ret = -ENOSYS; |
| error_report("%s: MADVISE not available %s:%" PRIx64 " +%zx (%d)", |
| __func__, rb->idstr, start, length, ret); |
| goto err; |
| #endif |
| } |
| trace_ram_block_discard_range(rb->idstr, host_startaddr, length, |
| need_madvise, need_fallocate, ret); |
| } else { |
| error_report("%s: Overrun block '%s' (%" PRIu64 "/%zx/" RAM_ADDR_FMT")", |
| __func__, rb->idstr, start, length, rb->max_length); |
| } |
| |
| err: |
| return ret; |
| } |
| |
| int ram_block_discard_guest_memfd_range(RAMBlock *rb, uint64_t start, |
| size_t length) |
| { |
| int ret = -1; |
| |
| #ifdef CONFIG_FALLOCATE_PUNCH_HOLE |
| ret = fallocate(rb->guest_memfd, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE, |
| start, length); |
| |
| if (ret) { |
| ret = -errno; |
| error_report("%s: Failed to fallocate %s:%" PRIx64 " +%zx (%d)", |
| __func__, rb->idstr, start, length, ret); |
| } |
| #else |
| ret = -ENOSYS; |
| error_report("%s: fallocate not available %s:%" PRIx64 " +%zx (%d)", |
| __func__, rb->idstr, start, length, ret); |
| #endif |
| |
| return ret; |
| } |
| |
| bool ramblock_is_pmem(RAMBlock *rb) |
| { |
| return rb->flags & RAM_PMEM; |
| } |
| |
| static void mtree_print_phys_entries(int start, int end, int skip, int ptr) |
| { |
| if (start == end - 1) { |
| qemu_printf("\t%3d ", start); |
| } else { |
| qemu_printf("\t%3d..%-3d ", start, end - 1); |
| } |
| qemu_printf(" skip=%d ", skip); |
| if (ptr == PHYS_MAP_NODE_NIL) { |
| qemu_printf(" ptr=NIL"); |
| } else if (!skip) { |
| qemu_printf(" ptr=#%d", ptr); |
| } else { |
| qemu_printf(" ptr=[%d]", ptr); |
| } |
| qemu_printf("\n"); |
| } |
| |
| #define MR_SIZE(size) (int128_nz(size) ? (hwaddr)int128_get64( \ |
| int128_sub((size), int128_one())) : 0) |
| |
| void mtree_print_dispatch(AddressSpaceDispatch *d, MemoryRegion *root) |
| { |
| int i; |
| |
| qemu_printf(" Dispatch\n"); |
| qemu_printf(" Physical sections\n"); |
| |
| for (i = 0; i < d->map.sections_nb; ++i) { |
| MemoryRegionSection *s = d->map.sections + i; |
| const char *names[] = { " [unassigned]", " [not dirty]", |
| " [ROM]", " [watch]" }; |
| |
| qemu_printf(" #%d @" HWADDR_FMT_plx ".." HWADDR_FMT_plx |
| " %s%s%s%s%s", |
| i, |
| s->offset_within_address_space, |
| s->offset_within_address_space + MR_SIZE(s->size), |
| s->mr->name ? s->mr->name : "(noname)", |
| i < ARRAY_SIZE(names) ? names[i] : "", |
| s->mr == root ? " [ROOT]" : "", |
| s == d->mru_section ? " [MRU]" : "", |
| s->mr->is_iommu ? " [iommu]" : ""); |
| |
| if (s->mr->alias) { |
| qemu_printf(" alias=%s", s->mr->alias->name ? |
| s->mr->alias->name : "noname"); |
| } |
| qemu_printf("\n"); |
| } |
| |
| qemu_printf(" Nodes (%d bits per level, %d levels) ptr=[%d] skip=%d\n", |
| P_L2_BITS, P_L2_LEVELS, d->phys_map.ptr, d->phys_map.skip); |
| for (i = 0; i < d->map.nodes_nb; ++i) { |
| int j, jprev; |
| PhysPageEntry prev; |
| Node *n = d->map.nodes + i; |
| |
| qemu_printf(" [%d]\n", i); |
| |
| for (j = 0, jprev = 0, prev = *n[0]; j < ARRAY_SIZE(*n); ++j) { |
| PhysPageEntry *pe = *n + j; |
| |
| if (pe->ptr == prev.ptr && pe->skip == prev.skip) { |
| continue; |
| } |
| |
| mtree_print_phys_entries(jprev, j, prev.skip, prev.ptr); |
| |
| jprev = j; |
| prev = *pe; |
| } |
| |
| if (jprev != ARRAY_SIZE(*n)) { |
| mtree_print_phys_entries(jprev, j, prev.skip, prev.ptr); |
| } |
| } |
| } |
| |
| /* Require any discards to work. */ |
| static unsigned int ram_block_discard_required_cnt; |
| /* Require only coordinated discards to work. */ |
| static unsigned int ram_block_coordinated_discard_required_cnt; |
| /* Disable any discards. */ |
| static unsigned int ram_block_discard_disabled_cnt; |
| /* Disable only uncoordinated discards. */ |
| static unsigned int ram_block_uncoordinated_discard_disabled_cnt; |
| static QemuMutex ram_block_discard_disable_mutex; |
| |
| static void ram_block_discard_disable_mutex_lock(void) |
| { |
| static gsize initialized; |
| |
| if (g_once_init_enter(&initialized)) { |
| qemu_mutex_init(&ram_block_discard_disable_mutex); |
| g_once_init_leave(&initialized, 1); |
| } |
| qemu_mutex_lock(&ram_block_discard_disable_mutex); |
| } |
| |
| static void ram_block_discard_disable_mutex_unlock(void) |
| { |
| qemu_mutex_unlock(&ram_block_discard_disable_mutex); |
| } |
| |
| int ram_block_discard_disable(bool state) |
| { |
| int ret = 0; |
| |
| ram_block_discard_disable_mutex_lock(); |
| if (!state) { |
| ram_block_discard_disabled_cnt--; |
| } else if (ram_block_discard_required_cnt || |
| ram_block_coordinated_discard_required_cnt) { |
| ret = -EBUSY; |
| } else { |
| ram_block_discard_disabled_cnt++; |
| } |
| ram_block_discard_disable_mutex_unlock(); |
| return ret; |
| } |
| |
| int ram_block_uncoordinated_discard_disable(bool state) |
| { |
| int ret = 0; |
| |
| ram_block_discard_disable_mutex_lock(); |
| if (!state) { |
| ram_block_uncoordinated_discard_disabled_cnt--; |
| } else if (ram_block_discard_required_cnt) { |
| ret = -EBUSY; |
| } else { |
| ram_block_uncoordinated_discard_disabled_cnt++; |
| } |
| ram_block_discard_disable_mutex_unlock(); |
| return ret; |
| } |
| |
| int ram_block_discard_require(bool state) |
| { |
| int ret = 0; |
| |
| ram_block_discard_disable_mutex_lock(); |
| if (!state) { |
| ram_block_discard_required_cnt--; |
| } else if (ram_block_discard_disabled_cnt || |
| ram_block_uncoordinated_discard_disabled_cnt) { |
| ret = -EBUSY; |
| } else { |
| ram_block_discard_required_cnt++; |
| } |
| ram_block_discard_disable_mutex_unlock(); |
| return ret; |
| } |
| |
| int ram_block_coordinated_discard_require(bool state) |
| { |
| int ret = 0; |
| |
| ram_block_discard_disable_mutex_lock(); |
| if (!state) { |
| ram_block_coordinated_discard_required_cnt--; |
| } else if (ram_block_discard_disabled_cnt) { |
| ret = -EBUSY; |
| } else { |
| ram_block_coordinated_discard_required_cnt++; |
| } |
| ram_block_discard_disable_mutex_unlock(); |
| return ret; |
| } |
| |
| bool ram_block_discard_is_disabled(void) |
| { |
| return qatomic_read(&ram_block_discard_disabled_cnt) || |
| qatomic_read(&ram_block_uncoordinated_discard_disabled_cnt); |
| } |
| |
| bool ram_block_discard_is_required(void) |
| { |
| return qatomic_read(&ram_block_discard_required_cnt) || |
| qatomic_read(&ram_block_coordinated_discard_required_cnt); |
| } |