| /* |
| * QEMU PPC PREP hardware System Emulator |
| * |
| * Copyright (c) 2003-2007 Jocelyn Mayer |
| * Copyright (c) 2017 Hervé Poussineau |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "qemu/osdep.h" |
| #include "cpu.h" |
| #include "hw/hw.h" |
| #include "hw/timer/m48t59.h" |
| #include "hw/char/serial.h" |
| #include "hw/block/fdc.h" |
| #include "net/net.h" |
| #include "sysemu/sysemu.h" |
| #include "hw/isa/isa.h" |
| #include "hw/pci/pci.h" |
| #include "hw/pci/pci_host.h" |
| #include "hw/ppc/ppc.h" |
| #include "hw/boards.h" |
| #include "qemu/error-report.h" |
| #include "qemu/log.h" |
| #include "hw/ide.h" |
| #include "hw/loader.h" |
| #include "hw/timer/mc146818rtc.h" |
| #include "hw/isa/pc87312.h" |
| #include "hw/net/ne2000-isa.h" |
| #include "sysemu/arch_init.h" |
| #include "sysemu/kvm.h" |
| #include "sysemu/qtest.h" |
| #include "exec/address-spaces.h" |
| #include "trace.h" |
| #include "elf.h" |
| #include "qemu/units.h" |
| #include "kvm_ppc.h" |
| |
| /* SMP is not enabled, for now */ |
| #define MAX_CPUS 1 |
| |
| #define MAX_IDE_BUS 2 |
| |
| #define CFG_ADDR 0xf0000510 |
| |
| #define BIOS_SIZE (1 * MiB) |
| #define BIOS_FILENAME "ppc_rom.bin" |
| #define KERNEL_LOAD_ADDR 0x01000000 |
| #define INITRD_LOAD_ADDR 0x01800000 |
| |
| /* Constants for devices init */ |
| static const int ide_iobase[2] = { 0x1f0, 0x170 }; |
| static const int ide_iobase2[2] = { 0x3f6, 0x376 }; |
| static const int ide_irq[2] = { 13, 13 }; |
| |
| #define NE2000_NB_MAX 6 |
| |
| static uint32_t ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 0x280, 0x380 }; |
| static int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 }; |
| |
| /* ISA IO ports bridge */ |
| #define PPC_IO_BASE 0x80000000 |
| |
| /* Fake super-io ports for PREP platform (Intel 82378ZB) */ |
| typedef struct sysctrl_t { |
| qemu_irq reset_irq; |
| Nvram *nvram; |
| uint8_t state; |
| uint8_t syscontrol; |
| int contiguous_map; |
| qemu_irq contiguous_map_irq; |
| int endian; |
| } sysctrl_t; |
| |
| enum { |
| STATE_HARDFILE = 0x01, |
| }; |
| |
| static sysctrl_t *sysctrl; |
| |
| static void PREP_io_800_writeb (void *opaque, uint32_t addr, uint32_t val) |
| { |
| sysctrl_t *sysctrl = opaque; |
| |
| trace_prep_io_800_writeb(addr - PPC_IO_BASE, val); |
| switch (addr) { |
| case 0x0092: |
| /* Special port 92 */ |
| /* Check soft reset asked */ |
| if (val & 0x01) { |
| qemu_irq_raise(sysctrl->reset_irq); |
| } else { |
| qemu_irq_lower(sysctrl->reset_irq); |
| } |
| /* Check LE mode */ |
| if (val & 0x02) { |
| sysctrl->endian = 1; |
| } else { |
| sysctrl->endian = 0; |
| } |
| break; |
| case 0x0800: |
| /* Motorola CPU configuration register : read-only */ |
| break; |
| case 0x0802: |
| /* Motorola base module feature register : read-only */ |
| break; |
| case 0x0803: |
| /* Motorola base module status register : read-only */ |
| break; |
| case 0x0808: |
| /* Hardfile light register */ |
| if (val & 1) |
| sysctrl->state |= STATE_HARDFILE; |
| else |
| sysctrl->state &= ~STATE_HARDFILE; |
| break; |
| case 0x0810: |
| /* Password protect 1 register */ |
| if (sysctrl->nvram != NULL) { |
| NvramClass *k = NVRAM_GET_CLASS(sysctrl->nvram); |
| (k->toggle_lock)(sysctrl->nvram, 1); |
| } |
| break; |
| case 0x0812: |
| /* Password protect 2 register */ |
| if (sysctrl->nvram != NULL) { |
| NvramClass *k = NVRAM_GET_CLASS(sysctrl->nvram); |
| (k->toggle_lock)(sysctrl->nvram, 2); |
| } |
| break; |
| case 0x0814: |
| /* L2 invalidate register */ |
| // tlb_flush(first_cpu, 1); |
| break; |
| case 0x081C: |
| /* system control register */ |
| sysctrl->syscontrol = val & 0x0F; |
| break; |
| case 0x0850: |
| /* I/O map type register */ |
| sysctrl->contiguous_map = val & 0x01; |
| qemu_set_irq(sysctrl->contiguous_map_irq, sysctrl->contiguous_map); |
| break; |
| default: |
| printf("ERROR: unaffected IO port write: %04" PRIx32 |
| " => %02" PRIx32"\n", addr, val); |
| break; |
| } |
| } |
| |
| static uint32_t PREP_io_800_readb (void *opaque, uint32_t addr) |
| { |
| sysctrl_t *sysctrl = opaque; |
| uint32_t retval = 0xFF; |
| |
| switch (addr) { |
| case 0x0092: |
| /* Special port 92 */ |
| retval = sysctrl->endian << 1; |
| break; |
| case 0x0800: |
| /* Motorola CPU configuration register */ |
| retval = 0xEF; /* MPC750 */ |
| break; |
| case 0x0802: |
| /* Motorola Base module feature register */ |
| retval = 0xAD; /* No ESCC, PMC slot neither ethernet */ |
| break; |
| case 0x0803: |
| /* Motorola base module status register */ |
| retval = 0xE0; /* Standard MPC750 */ |
| break; |
| case 0x080C: |
| /* Equipment present register: |
| * no L2 cache |
| * no upgrade processor |
| * no cards in PCI slots |
| * SCSI fuse is bad |
| */ |
| retval = 0x3C; |
| break; |
| case 0x0810: |
| /* Motorola base module extended feature register */ |
| retval = 0x39; /* No USB, CF and PCI bridge. NVRAM present */ |
| break; |
| case 0x0814: |
| /* L2 invalidate: don't care */ |
| break; |
| case 0x0818: |
| /* Keylock */ |
| retval = 0x00; |
| break; |
| case 0x081C: |
| /* system control register |
| * 7 - 6 / 1 - 0: L2 cache enable |
| */ |
| retval = sysctrl->syscontrol; |
| break; |
| case 0x0823: |
| /* */ |
| retval = 0x03; /* no L2 cache */ |
| break; |
| case 0x0850: |
| /* I/O map type register */ |
| retval = sysctrl->contiguous_map; |
| break; |
| default: |
| printf("ERROR: unaffected IO port: %04" PRIx32 " read\n", addr); |
| break; |
| } |
| trace_prep_io_800_readb(addr - PPC_IO_BASE, retval); |
| |
| return retval; |
| } |
| |
| |
| #define NVRAM_SIZE 0x2000 |
| |
| static void fw_cfg_boot_set(void *opaque, const char *boot_device, |
| Error **errp) |
| { |
| fw_cfg_modify_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]); |
| } |
| |
| static void ppc_prep_reset(void *opaque) |
| { |
| PowerPCCPU *cpu = opaque; |
| |
| cpu_reset(CPU(cpu)); |
| } |
| |
| static const MemoryRegionPortio prep_portio_list[] = { |
| /* System control ports */ |
| { 0x0092, 1, 1, .read = PREP_io_800_readb, .write = PREP_io_800_writeb, }, |
| { 0x0800, 0x52, 1, |
| .read = PREP_io_800_readb, .write = PREP_io_800_writeb, }, |
| /* Special port to get debug messages from Open-Firmware */ |
| { 0x0F00, 4, 1, .write = PPC_debug_write, }, |
| PORTIO_END_OF_LIST(), |
| }; |
| |
| static PortioList prep_port_list; |
| |
| /*****************************************************************************/ |
| /* NVRAM helpers */ |
| static inline uint32_t nvram_read(Nvram *nvram, uint32_t addr) |
| { |
| NvramClass *k = NVRAM_GET_CLASS(nvram); |
| return (k->read)(nvram, addr); |
| } |
| |
| static inline void nvram_write(Nvram *nvram, uint32_t addr, uint32_t val) |
| { |
| NvramClass *k = NVRAM_GET_CLASS(nvram); |
| (k->write)(nvram, addr, val); |
| } |
| |
| static void NVRAM_set_byte(Nvram *nvram, uint32_t addr, uint8_t value) |
| { |
| nvram_write(nvram, addr, value); |
| } |
| |
| static uint8_t NVRAM_get_byte(Nvram *nvram, uint32_t addr) |
| { |
| return nvram_read(nvram, addr); |
| } |
| |
| static void NVRAM_set_word(Nvram *nvram, uint32_t addr, uint16_t value) |
| { |
| nvram_write(nvram, addr, value >> 8); |
| nvram_write(nvram, addr + 1, value & 0xFF); |
| } |
| |
| static uint16_t NVRAM_get_word(Nvram *nvram, uint32_t addr) |
| { |
| uint16_t tmp; |
| |
| tmp = nvram_read(nvram, addr) << 8; |
| tmp |= nvram_read(nvram, addr + 1); |
| |
| return tmp; |
| } |
| |
| static void NVRAM_set_lword(Nvram *nvram, uint32_t addr, uint32_t value) |
| { |
| nvram_write(nvram, addr, value >> 24); |
| nvram_write(nvram, addr + 1, (value >> 16) & 0xFF); |
| nvram_write(nvram, addr + 2, (value >> 8) & 0xFF); |
| nvram_write(nvram, addr + 3, value & 0xFF); |
| } |
| |
| static void NVRAM_set_string(Nvram *nvram, uint32_t addr, const char *str, |
| uint32_t max) |
| { |
| int i; |
| |
| for (i = 0; i < max && str[i] != '\0'; i++) { |
| nvram_write(nvram, addr + i, str[i]); |
| } |
| nvram_write(nvram, addr + i, str[i]); |
| nvram_write(nvram, addr + max - 1, '\0'); |
| } |
| |
| static uint16_t NVRAM_crc_update (uint16_t prev, uint16_t value) |
| { |
| uint16_t tmp; |
| uint16_t pd, pd1, pd2; |
| |
| tmp = prev >> 8; |
| pd = prev ^ value; |
| pd1 = pd & 0x000F; |
| pd2 = ((pd >> 4) & 0x000F) ^ pd1; |
| tmp ^= (pd1 << 3) | (pd1 << 8); |
| tmp ^= pd2 | (pd2 << 7) | (pd2 << 12); |
| |
| return tmp; |
| } |
| |
| static uint16_t NVRAM_compute_crc (Nvram *nvram, uint32_t start, uint32_t count) |
| { |
| uint32_t i; |
| uint16_t crc = 0xFFFF; |
| int odd; |
| |
| odd = count & 1; |
| count &= ~1; |
| for (i = 0; i != count; i++) { |
| crc = NVRAM_crc_update(crc, NVRAM_get_word(nvram, start + i)); |
| } |
| if (odd) { |
| crc = NVRAM_crc_update(crc, NVRAM_get_byte(nvram, start + i) << 8); |
| } |
| |
| return crc; |
| } |
| |
| #define CMDLINE_ADDR 0x017ff000 |
| |
| static int PPC_NVRAM_set_params (Nvram *nvram, uint16_t NVRAM_size, |
| const char *arch, |
| uint32_t RAM_size, int boot_device, |
| uint32_t kernel_image, uint32_t kernel_size, |
| const char *cmdline, |
| uint32_t initrd_image, uint32_t initrd_size, |
| uint32_t NVRAM_image, |
| int width, int height, int depth) |
| { |
| uint16_t crc; |
| |
| /* Set parameters for Open Hack'Ware BIOS */ |
| NVRAM_set_string(nvram, 0x00, "QEMU_BIOS", 16); |
| NVRAM_set_lword(nvram, 0x10, 0x00000002); /* structure v2 */ |
| NVRAM_set_word(nvram, 0x14, NVRAM_size); |
| NVRAM_set_string(nvram, 0x20, arch, 16); |
| NVRAM_set_lword(nvram, 0x30, RAM_size); |
| NVRAM_set_byte(nvram, 0x34, boot_device); |
| NVRAM_set_lword(nvram, 0x38, kernel_image); |
| NVRAM_set_lword(nvram, 0x3C, kernel_size); |
| if (cmdline) { |
| /* XXX: put the cmdline in NVRAM too ? */ |
| pstrcpy_targphys("cmdline", CMDLINE_ADDR, RAM_size - CMDLINE_ADDR, |
| cmdline); |
| NVRAM_set_lword(nvram, 0x40, CMDLINE_ADDR); |
| NVRAM_set_lword(nvram, 0x44, strlen(cmdline)); |
| } else { |
| NVRAM_set_lword(nvram, 0x40, 0); |
| NVRAM_set_lword(nvram, 0x44, 0); |
| } |
| NVRAM_set_lword(nvram, 0x48, initrd_image); |
| NVRAM_set_lword(nvram, 0x4C, initrd_size); |
| NVRAM_set_lword(nvram, 0x50, NVRAM_image); |
| |
| NVRAM_set_word(nvram, 0x54, width); |
| NVRAM_set_word(nvram, 0x56, height); |
| NVRAM_set_word(nvram, 0x58, depth); |
| crc = NVRAM_compute_crc(nvram, 0x00, 0xF8); |
| NVRAM_set_word(nvram, 0xFC, crc); |
| |
| return 0; |
| } |
| |
| /* PowerPC PREP hardware initialisation */ |
| static void ppc_prep_init(MachineState *machine) |
| { |
| ram_addr_t ram_size = machine->ram_size; |
| const char *kernel_filename = machine->kernel_filename; |
| const char *kernel_cmdline = machine->kernel_cmdline; |
| const char *initrd_filename = machine->initrd_filename; |
| const char *boot_device = machine->boot_order; |
| MemoryRegion *sysmem = get_system_memory(); |
| PowerPCCPU *cpu = NULL; |
| CPUPPCState *env = NULL; |
| Nvram *m48t59; |
| #if 0 |
| MemoryRegion *xcsr = g_new(MemoryRegion, 1); |
| #endif |
| int linux_boot, i, nb_nics1; |
| MemoryRegion *ram = g_new(MemoryRegion, 1); |
| uint32_t kernel_base, initrd_base; |
| long kernel_size, initrd_size; |
| DeviceState *dev; |
| PCIHostState *pcihost; |
| PCIBus *pci_bus; |
| PCIDevice *pci; |
| ISABus *isa_bus; |
| ISADevice *isa; |
| int ppc_boot_device; |
| DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS]; |
| |
| sysctrl = g_malloc0(sizeof(sysctrl_t)); |
| |
| linux_boot = (kernel_filename != NULL); |
| |
| /* init CPUs */ |
| for (i = 0; i < smp_cpus; i++) { |
| cpu = POWERPC_CPU(cpu_create(machine->cpu_type)); |
| env = &cpu->env; |
| |
| if (env->flags & POWERPC_FLAG_RTC_CLK) { |
| /* POWER / PowerPC 601 RTC clock frequency is 7.8125 MHz */ |
| cpu_ppc_tb_init(env, 7812500UL); |
| } else { |
| /* Set time-base frequency to 100 Mhz */ |
| cpu_ppc_tb_init(env, 100UL * 1000UL * 1000UL); |
| } |
| qemu_register_reset(ppc_prep_reset, cpu); |
| } |
| |
| /* allocate RAM */ |
| memory_region_allocate_system_memory(ram, NULL, "ppc_prep.ram", ram_size); |
| memory_region_add_subregion(sysmem, 0, ram); |
| |
| if (linux_boot) { |
| kernel_base = KERNEL_LOAD_ADDR; |
| /* now we can load the kernel */ |
| kernel_size = load_image_targphys(kernel_filename, kernel_base, |
| ram_size - kernel_base); |
| if (kernel_size < 0) { |
| error_report("could not load kernel '%s'", kernel_filename); |
| exit(1); |
| } |
| /* load initrd */ |
| if (initrd_filename) { |
| initrd_base = INITRD_LOAD_ADDR; |
| initrd_size = load_image_targphys(initrd_filename, initrd_base, |
| ram_size - initrd_base); |
| if (initrd_size < 0) { |
| error_report("could not load initial ram disk '%s'", |
| initrd_filename); |
| exit(1); |
| } |
| } else { |
| initrd_base = 0; |
| initrd_size = 0; |
| } |
| ppc_boot_device = 'm'; |
| } else { |
| kernel_base = 0; |
| kernel_size = 0; |
| initrd_base = 0; |
| initrd_size = 0; |
| ppc_boot_device = '\0'; |
| /* For now, OHW cannot boot from the network. */ |
| for (i = 0; boot_device[i] != '\0'; i++) { |
| if (boot_device[i] >= 'a' && boot_device[i] <= 'f') { |
| ppc_boot_device = boot_device[i]; |
| break; |
| } |
| } |
| if (ppc_boot_device == '\0') { |
| error_report("No valid boot device for Mac99 machine"); |
| exit(1); |
| } |
| } |
| |
| if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) { |
| error_report("Only 6xx bus is supported on PREP machine"); |
| exit(1); |
| } |
| |
| dev = qdev_create(NULL, "raven-pcihost"); |
| if (bios_name == NULL) { |
| bios_name = BIOS_FILENAME; |
| } |
| qdev_prop_set_string(dev, "bios-name", bios_name); |
| qdev_prop_set_uint32(dev, "elf-machine", PPC_ELF_MACHINE); |
| qdev_prop_set_bit(dev, "is-legacy-prep", true); |
| pcihost = PCI_HOST_BRIDGE(dev); |
| object_property_add_child(qdev_get_machine(), "raven", OBJECT(dev), NULL); |
| qdev_init_nofail(dev); |
| pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0"); |
| if (pci_bus == NULL) { |
| error_report("Couldn't create PCI host controller"); |
| exit(1); |
| } |
| sysctrl->contiguous_map_irq = qdev_get_gpio_in(dev, 0); |
| |
| /* PCI -> ISA bridge */ |
| pci = pci_create_simple(pci_bus, PCI_DEVFN(1, 0), "i82378"); |
| cpu = POWERPC_CPU(first_cpu); |
| qdev_connect_gpio_out(&pci->qdev, 0, |
| cpu->env.irq_inputs[PPC6xx_INPUT_INT]); |
| sysbus_connect_irq(&pcihost->busdev, 0, qdev_get_gpio_in(&pci->qdev, 9)); |
| sysbus_connect_irq(&pcihost->busdev, 1, qdev_get_gpio_in(&pci->qdev, 11)); |
| sysbus_connect_irq(&pcihost->busdev, 2, qdev_get_gpio_in(&pci->qdev, 9)); |
| sysbus_connect_irq(&pcihost->busdev, 3, qdev_get_gpio_in(&pci->qdev, 11)); |
| isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(pci), "isa.0")); |
| |
| /* Super I/O (parallel + serial ports) */ |
| isa = isa_create(isa_bus, TYPE_PC87312_SUPERIO); |
| dev = DEVICE(isa); |
| qdev_prop_set_uint8(dev, "config", 13); /* fdc, ser0, ser1, par0 */ |
| qdev_init_nofail(dev); |
| |
| /* init basic PC hardware */ |
| pci_vga_init(pci_bus); |
| |
| nb_nics1 = nb_nics; |
| if (nb_nics1 > NE2000_NB_MAX) |
| nb_nics1 = NE2000_NB_MAX; |
| for(i = 0; i < nb_nics1; i++) { |
| if (nd_table[i].model == NULL) { |
| nd_table[i].model = g_strdup("ne2k_isa"); |
| } |
| if (strcmp(nd_table[i].model, "ne2k_isa") == 0) { |
| isa_ne2000_init(isa_bus, ne2000_io[i], ne2000_irq[i], |
| &nd_table[i]); |
| } else { |
| pci_nic_init_nofail(&nd_table[i], pci_bus, "ne2k_pci", NULL); |
| } |
| } |
| |
| ide_drive_get(hd, ARRAY_SIZE(hd)); |
| for(i = 0; i < MAX_IDE_BUS; i++) { |
| isa_ide_init(isa_bus, ide_iobase[i], ide_iobase2[i], ide_irq[i], |
| hd[2 * i], |
| hd[2 * i + 1]); |
| } |
| |
| cpu = POWERPC_CPU(first_cpu); |
| sysctrl->reset_irq = cpu->env.irq_inputs[PPC6xx_INPUT_HRESET]; |
| |
| portio_list_init(&prep_port_list, NULL, prep_portio_list, sysctrl, "prep"); |
| portio_list_add(&prep_port_list, isa_address_space_io(isa), 0x0); |
| |
| /* |
| * PowerPC control and status register group: unimplemented, |
| * would be at address 0xFEFF0000. |
| */ |
| |
| if (machine_usb(machine)) { |
| pci_create_simple(pci_bus, -1, "pci-ohci"); |
| } |
| |
| m48t59 = m48t59_init_isa(isa_bus, 0x0074, NVRAM_SIZE, 2000, 59); |
| if (m48t59 == NULL) |
| return; |
| sysctrl->nvram = m48t59; |
| |
| /* Initialise NVRAM */ |
| PPC_NVRAM_set_params(m48t59, NVRAM_SIZE, "PREP", ram_size, |
| ppc_boot_device, |
| kernel_base, kernel_size, |
| kernel_cmdline, |
| initrd_base, initrd_size, |
| /* XXX: need an option to load a NVRAM image */ |
| 0, |
| graphic_width, graphic_height, graphic_depth); |
| } |
| |
| static void prep_machine_init(MachineClass *mc) |
| { |
| mc->deprecation_reason = "use 40p machine type instead"; |
| mc->desc = "PowerPC PREP platform"; |
| mc->init = ppc_prep_init; |
| mc->block_default_type = IF_IDE; |
| mc->max_cpus = MAX_CPUS; |
| mc->default_boot_order = "cad"; |
| mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("602"); |
| mc->default_display = "std"; |
| } |
| |
| static int prep_set_cmos_checksum(DeviceState *dev, void *opaque) |
| { |
| uint16_t checksum = *(uint16_t *)opaque; |
| ISADevice *rtc; |
| |
| if (object_dynamic_cast(OBJECT(dev), TYPE_MC146818_RTC)) { |
| rtc = ISA_DEVICE(dev); |
| rtc_set_memory(rtc, 0x2e, checksum & 0xff); |
| rtc_set_memory(rtc, 0x3e, checksum & 0xff); |
| rtc_set_memory(rtc, 0x2f, checksum >> 8); |
| rtc_set_memory(rtc, 0x3f, checksum >> 8); |
| |
| object_property_add_alias(qdev_get_machine(), "rtc-time", OBJECT(rtc), |
| "date", NULL); |
| } |
| return 0; |
| } |
| |
| static void ibm_40p_init(MachineState *machine) |
| { |
| CPUPPCState *env = NULL; |
| uint16_t cmos_checksum; |
| PowerPCCPU *cpu; |
| DeviceState *dev, *i82378_dev; |
| SysBusDevice *pcihost, *s; |
| Nvram *m48t59 = NULL; |
| PCIBus *pci_bus; |
| ISABus *isa_bus; |
| void *fw_cfg; |
| int i; |
| uint32_t kernel_base = 0, initrd_base = 0; |
| long kernel_size = 0, initrd_size = 0; |
| char boot_device; |
| |
| /* init CPU */ |
| cpu = POWERPC_CPU(cpu_create(machine->cpu_type)); |
| env = &cpu->env; |
| if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) { |
| error_report("only 6xx bus is supported on this machine"); |
| exit(1); |
| } |
| |
| if (env->flags & POWERPC_FLAG_RTC_CLK) { |
| /* POWER / PowerPC 601 RTC clock frequency is 7.8125 MHz */ |
| cpu_ppc_tb_init(env, 7812500UL); |
| } else { |
| /* Set time-base frequency to 100 Mhz */ |
| cpu_ppc_tb_init(env, 100UL * 1000UL * 1000UL); |
| } |
| qemu_register_reset(ppc_prep_reset, cpu); |
| |
| /* PCI host */ |
| dev = qdev_create(NULL, "raven-pcihost"); |
| if (!bios_name) { |
| bios_name = "openbios-ppc"; |
| } |
| qdev_prop_set_string(dev, "bios-name", bios_name); |
| qdev_prop_set_uint32(dev, "elf-machine", PPC_ELF_MACHINE); |
| pcihost = SYS_BUS_DEVICE(dev); |
| object_property_add_child(qdev_get_machine(), "raven", OBJECT(dev), NULL); |
| qdev_init_nofail(dev); |
| pci_bus = PCI_BUS(qdev_get_child_bus(dev, "pci.0")); |
| if (!pci_bus) { |
| error_report("could not create PCI host controller"); |
| exit(1); |
| } |
| |
| /* PCI -> ISA bridge */ |
| i82378_dev = DEVICE(pci_create_simple(pci_bus, PCI_DEVFN(11, 0), "i82378")); |
| qdev_connect_gpio_out(i82378_dev, 0, |
| cpu->env.irq_inputs[PPC6xx_INPUT_INT]); |
| sysbus_connect_irq(pcihost, 0, qdev_get_gpio_in(i82378_dev, 15)); |
| isa_bus = ISA_BUS(qdev_get_child_bus(i82378_dev, "isa.0")); |
| |
| /* Memory controller */ |
| dev = DEVICE(isa_create(isa_bus, "rs6000-mc")); |
| qdev_prop_set_uint32(dev, "ram-size", machine->ram_size); |
| qdev_init_nofail(dev); |
| |
| /* RTC */ |
| dev = DEVICE(isa_create(isa_bus, TYPE_MC146818_RTC)); |
| qdev_prop_set_int32(dev, "base_year", 1900); |
| qdev_init_nofail(dev); |
| |
| /* initialize CMOS checksums */ |
| cmos_checksum = 0x6aa9; |
| qbus_walk_children(BUS(isa_bus), prep_set_cmos_checksum, NULL, NULL, NULL, |
| &cmos_checksum); |
| |
| /* add some more devices */ |
| if (defaults_enabled()) { |
| m48t59 = NVRAM(isa_create_simple(isa_bus, "isa-m48t59")); |
| |
| dev = DEVICE(isa_create(isa_bus, "cs4231a")); |
| qdev_prop_set_uint32(dev, "iobase", 0x830); |
| qdev_prop_set_uint32(dev, "irq", 10); |
| qdev_init_nofail(dev); |
| |
| dev = DEVICE(isa_create(isa_bus, "pc87312")); |
| qdev_prop_set_uint32(dev, "config", 12); |
| qdev_init_nofail(dev); |
| |
| dev = DEVICE(isa_create(isa_bus, "prep-systemio")); |
| qdev_prop_set_uint32(dev, "ibm-planar-id", 0xfc); |
| qdev_prop_set_uint32(dev, "equipment", 0xc0); |
| qdev_init_nofail(dev); |
| |
| dev = DEVICE(pci_create_simple(pci_bus, PCI_DEVFN(1, 0), |
| "lsi53c810")); |
| lsi53c8xx_handle_legacy_cmdline(dev); |
| qdev_connect_gpio_out(dev, 0, qdev_get_gpio_in(i82378_dev, 13)); |
| |
| /* XXX: s3-trio at PCI_DEVFN(2, 0) */ |
| pci_vga_init(pci_bus); |
| |
| for (i = 0; i < nb_nics; i++) { |
| pci_nic_init_nofail(&nd_table[i], pci_bus, "pcnet", |
| i == 0 ? "3" : NULL); |
| } |
| } |
| |
| /* Prepare firmware configuration for OpenBIOS */ |
| dev = qdev_create(NULL, TYPE_FW_CFG_MEM); |
| fw_cfg = FW_CFG(dev); |
| qdev_prop_set_uint32(dev, "data_width", 1); |
| qdev_prop_set_bit(dev, "dma_enabled", false); |
| object_property_add_child(OBJECT(qdev_get_machine()), TYPE_FW_CFG, |
| OBJECT(fw_cfg), NULL); |
| qdev_init_nofail(dev); |
| s = SYS_BUS_DEVICE(dev); |
| sysbus_mmio_map(s, 0, CFG_ADDR); |
| sysbus_mmio_map(s, 1, CFG_ADDR + 2); |
| |
| if (machine->kernel_filename) { |
| /* load kernel */ |
| kernel_base = KERNEL_LOAD_ADDR; |
| kernel_size = load_image_targphys(machine->kernel_filename, |
| kernel_base, |
| machine->ram_size - kernel_base); |
| if (kernel_size < 0) { |
| error_report("could not load kernel '%s'", |
| machine->kernel_filename); |
| exit(1); |
| } |
| fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_base); |
| fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size); |
| /* load initrd */ |
| if (machine->initrd_filename) { |
| initrd_base = INITRD_LOAD_ADDR; |
| initrd_size = load_image_targphys(machine->initrd_filename, |
| initrd_base, |
| machine->ram_size - initrd_base); |
| if (initrd_size < 0) { |
| error_report("could not load initial ram disk '%s'", |
| machine->initrd_filename); |
| exit(1); |
| } |
| fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_base); |
| fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size); |
| } |
| if (machine->kernel_cmdline && *machine->kernel_cmdline) { |
| fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, CMDLINE_ADDR); |
| pstrcpy_targphys("cmdline", CMDLINE_ADDR, TARGET_PAGE_SIZE, |
| machine->kernel_cmdline); |
| fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA, |
| machine->kernel_cmdline); |
| fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, |
| strlen(machine->kernel_cmdline) + 1); |
| } |
| boot_device = 'm'; |
| } else { |
| boot_device = machine->boot_order[0]; |
| } |
| |
| fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus); |
| fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)machine->ram_size); |
| fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, ARCH_PREP); |
| |
| fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_WIDTH, graphic_width); |
| fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_HEIGHT, graphic_height); |
| fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_DEPTH, graphic_depth); |
| |
| fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_IS_KVM, kvm_enabled()); |
| if (kvm_enabled()) { |
| #ifdef CONFIG_KVM |
| uint8_t *hypercall; |
| |
| fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, kvmppc_get_tbfreq()); |
| hypercall = g_malloc(16); |
| kvmppc_get_hypercall(env, hypercall, 16); |
| fw_cfg_add_bytes(fw_cfg, FW_CFG_PPC_KVM_HC, hypercall, 16); |
| fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_KVM_PID, getpid()); |
| #endif |
| } else { |
| fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, NANOSECONDS_PER_SECOND); |
| } |
| fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, boot_device); |
| qemu_register_boot_set(fw_cfg_boot_set, fw_cfg); |
| |
| /* Prepare firmware configuration for Open Hack'Ware */ |
| if (m48t59) { |
| PPC_NVRAM_set_params(m48t59, NVRAM_SIZE, "PREP", ram_size, |
| boot_device, |
| kernel_base, kernel_size, |
| machine->kernel_cmdline, |
| initrd_base, initrd_size, |
| /* XXX: need an option to load a NVRAM image */ |
| 0, |
| graphic_width, graphic_height, graphic_depth); |
| } |
| } |
| |
| static void ibm_40p_machine_init(MachineClass *mc) |
| { |
| mc->desc = "IBM RS/6000 7020 (40p)", |
| mc->init = ibm_40p_init; |
| mc->max_cpus = 1; |
| mc->default_ram_size = 128 * MiB; |
| mc->block_default_type = IF_SCSI; |
| mc->default_boot_order = "c"; |
| mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("604"); |
| mc->default_display = "std"; |
| } |
| |
| DEFINE_MACHINE("40p", ibm_40p_machine_init) |
| DEFINE_MACHINE("prep", prep_machine_init) |