| /* |
| * TI OMAP processors emulation. |
| * |
| * Copyright (C) 2007-2008 Nokia Corporation |
| * Written by Andrzej Zaborowski <andrew@openedhand.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 or |
| * (at your option) version 3 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "sysemu/block-backend.h" |
| #include "sysemu/blockdev.h" |
| #include "hw/boards.h" |
| #include "hw/hw.h" |
| #include "hw/arm/arm.h" |
| #include "hw/arm/omap.h" |
| #include "sysemu/sysemu.h" |
| #include "qemu/timer.h" |
| #include "sysemu/char.h" |
| #include "hw/block/flash.h" |
| #include "hw/arm/soc_dma.h" |
| #include "hw/sysbus.h" |
| #include "audio/audio.h" |
| |
| /* Enhanced Audio Controller (CODEC only) */ |
| struct omap_eac_s { |
| qemu_irq irq; |
| MemoryRegion iomem; |
| |
| uint16_t sysconfig; |
| uint8_t config[4]; |
| uint8_t control; |
| uint8_t address; |
| uint16_t data; |
| uint8_t vtol; |
| uint8_t vtsl; |
| uint16_t mixer; |
| uint16_t gain[4]; |
| uint8_t att; |
| uint16_t max[7]; |
| |
| struct { |
| qemu_irq txdrq; |
| qemu_irq rxdrq; |
| uint32_t (*txrx)(void *opaque, uint32_t, int); |
| void *opaque; |
| |
| #define EAC_BUF_LEN 1024 |
| uint32_t rxbuf[EAC_BUF_LEN]; |
| int rxoff; |
| int rxlen; |
| int rxavail; |
| uint32_t txbuf[EAC_BUF_LEN]; |
| int txlen; |
| int txavail; |
| |
| int enable; |
| int rate; |
| |
| uint16_t config[4]; |
| |
| /* These need to be moved to the actual codec */ |
| QEMUSoundCard card; |
| SWVoiceIn *in_voice; |
| SWVoiceOut *out_voice; |
| int hw_enable; |
| } codec; |
| |
| struct { |
| uint8_t control; |
| uint16_t config; |
| } modem, bt; |
| }; |
| |
| static inline void omap_eac_interrupt_update(struct omap_eac_s *s) |
| { |
| qemu_set_irq(s->irq, (s->codec.config[1] >> 14) & 1); /* AURDI */ |
| } |
| |
| static inline void omap_eac_in_dmarequest_update(struct omap_eac_s *s) |
| { |
| qemu_set_irq(s->codec.rxdrq, (s->codec.rxavail || s->codec.rxlen) && |
| ((s->codec.config[1] >> 12) & 1)); /* DMAREN */ |
| } |
| |
| static inline void omap_eac_out_dmarequest_update(struct omap_eac_s *s) |
| { |
| qemu_set_irq(s->codec.txdrq, s->codec.txlen < s->codec.txavail && |
| ((s->codec.config[1] >> 11) & 1)); /* DMAWEN */ |
| } |
| |
| static inline void omap_eac_in_refill(struct omap_eac_s *s) |
| { |
| int left = MIN(EAC_BUF_LEN - s->codec.rxlen, s->codec.rxavail) << 2; |
| int start = ((s->codec.rxoff + s->codec.rxlen) & (EAC_BUF_LEN - 1)) << 2; |
| int leftwrap = MIN(left, (EAC_BUF_LEN << 2) - start); |
| int recv = 1; |
| uint8_t *buf = (uint8_t *) s->codec.rxbuf + start; |
| |
| left -= leftwrap; |
| start = 0; |
| while (leftwrap && (recv = AUD_read(s->codec.in_voice, buf + start, |
| leftwrap)) > 0) { /* Be defensive */ |
| start += recv; |
| leftwrap -= recv; |
| } |
| if (recv <= 0) |
| s->codec.rxavail = 0; |
| else |
| s->codec.rxavail -= start >> 2; |
| s->codec.rxlen += start >> 2; |
| |
| if (recv > 0 && left > 0) { |
| start = 0; |
| while (left && (recv = AUD_read(s->codec.in_voice, |
| (uint8_t *) s->codec.rxbuf + start, |
| left)) > 0) { /* Be defensive */ |
| start += recv; |
| left -= recv; |
| } |
| if (recv <= 0) |
| s->codec.rxavail = 0; |
| else |
| s->codec.rxavail -= start >> 2; |
| s->codec.rxlen += start >> 2; |
| } |
| } |
| |
| static inline void omap_eac_out_empty(struct omap_eac_s *s) |
| { |
| int left = s->codec.txlen << 2; |
| int start = 0; |
| int sent = 1; |
| |
| while (left && (sent = AUD_write(s->codec.out_voice, |
| (uint8_t *) s->codec.txbuf + start, |
| left)) > 0) { /* Be defensive */ |
| start += sent; |
| left -= sent; |
| } |
| |
| if (!sent) { |
| s->codec.txavail = 0; |
| omap_eac_out_dmarequest_update(s); |
| } |
| |
| if (start) |
| s->codec.txlen = 0; |
| } |
| |
| static void omap_eac_in_cb(void *opaque, int avail_b) |
| { |
| struct omap_eac_s *s = (struct omap_eac_s *) opaque; |
| |
| s->codec.rxavail = avail_b >> 2; |
| omap_eac_in_refill(s); |
| /* TODO: possibly discard current buffer if overrun */ |
| omap_eac_in_dmarequest_update(s); |
| } |
| |
| static void omap_eac_out_cb(void *opaque, int free_b) |
| { |
| struct omap_eac_s *s = (struct omap_eac_s *) opaque; |
| |
| s->codec.txavail = free_b >> 2; |
| if (s->codec.txlen) |
| omap_eac_out_empty(s); |
| else |
| omap_eac_out_dmarequest_update(s); |
| } |
| |
| static void omap_eac_enable_update(struct omap_eac_s *s) |
| { |
| s->codec.enable = !(s->codec.config[1] & 1) && /* EACPWD */ |
| (s->codec.config[1] & 2) && /* AUDEN */ |
| s->codec.hw_enable; |
| } |
| |
| static const int omap_eac_fsint[4] = { |
| 8000, |
| 11025, |
| 22050, |
| 44100, |
| }; |
| |
| static const int omap_eac_fsint2[8] = { |
| 8000, |
| 11025, |
| 22050, |
| 44100, |
| 48000, |
| 0, 0, 0, |
| }; |
| |
| static const int omap_eac_fsint3[16] = { |
| 8000, |
| 11025, |
| 16000, |
| 22050, |
| 24000, |
| 32000, |
| 44100, |
| 48000, |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| }; |
| |
| static void omap_eac_rate_update(struct omap_eac_s *s) |
| { |
| int fsint[3]; |
| |
| fsint[2] = (s->codec.config[3] >> 9) & 0xf; |
| fsint[1] = (s->codec.config[2] >> 0) & 0x7; |
| fsint[0] = (s->codec.config[0] >> 6) & 0x3; |
| if (fsint[2] < 0xf) |
| s->codec.rate = omap_eac_fsint3[fsint[2]]; |
| else if (fsint[1] < 0x7) |
| s->codec.rate = omap_eac_fsint2[fsint[1]]; |
| else |
| s->codec.rate = omap_eac_fsint[fsint[0]]; |
| } |
| |
| static void omap_eac_volume_update(struct omap_eac_s *s) |
| { |
| /* TODO */ |
| } |
| |
| static void omap_eac_format_update(struct omap_eac_s *s) |
| { |
| struct audsettings fmt; |
| |
| /* The hardware buffers at most one sample */ |
| if (s->codec.rxlen) |
| s->codec.rxlen = 1; |
| |
| if (s->codec.in_voice) { |
| AUD_set_active_in(s->codec.in_voice, 0); |
| AUD_close_in(&s->codec.card, s->codec.in_voice); |
| s->codec.in_voice = NULL; |
| } |
| if (s->codec.out_voice) { |
| omap_eac_out_empty(s); |
| AUD_set_active_out(s->codec.out_voice, 0); |
| AUD_close_out(&s->codec.card, s->codec.out_voice); |
| s->codec.out_voice = NULL; |
| s->codec.txavail = 0; |
| } |
| /* Discard what couldn't be written */ |
| s->codec.txlen = 0; |
| |
| omap_eac_enable_update(s); |
| if (!s->codec.enable) |
| return; |
| |
| omap_eac_rate_update(s); |
| fmt.endianness = ((s->codec.config[0] >> 8) & 1); /* LI_BI */ |
| fmt.nchannels = ((s->codec.config[0] >> 10) & 1) ? 2 : 1; /* MN_ST */ |
| fmt.freq = s->codec.rate; |
| /* TODO: signedness possibly depends on the CODEC hardware - or |
| * does I2S specify it? */ |
| /* All register writes are 16 bits so we we store 16-bit samples |
| * in the buffers regardless of AGCFR[B8_16] value. */ |
| fmt.fmt = AUD_FMT_U16; |
| |
| s->codec.in_voice = AUD_open_in(&s->codec.card, s->codec.in_voice, |
| "eac.codec.in", s, omap_eac_in_cb, &fmt); |
| s->codec.out_voice = AUD_open_out(&s->codec.card, s->codec.out_voice, |
| "eac.codec.out", s, omap_eac_out_cb, &fmt); |
| |
| omap_eac_volume_update(s); |
| |
| AUD_set_active_in(s->codec.in_voice, 1); |
| AUD_set_active_out(s->codec.out_voice, 1); |
| } |
| |
| static void omap_eac_reset(struct omap_eac_s *s) |
| { |
| s->sysconfig = 0; |
| s->config[0] = 0x0c; |
| s->config[1] = 0x09; |
| s->config[2] = 0xab; |
| s->config[3] = 0x03; |
| s->control = 0x00; |
| s->address = 0x00; |
| s->data = 0x0000; |
| s->vtol = 0x00; |
| s->vtsl = 0x00; |
| s->mixer = 0x0000; |
| s->gain[0] = 0xe7e7; |
| s->gain[1] = 0x6767; |
| s->gain[2] = 0x6767; |
| s->gain[3] = 0x6767; |
| s->att = 0xce; |
| s->max[0] = 0; |
| s->max[1] = 0; |
| s->max[2] = 0; |
| s->max[3] = 0; |
| s->max[4] = 0; |
| s->max[5] = 0; |
| s->max[6] = 0; |
| |
| s->modem.control = 0x00; |
| s->modem.config = 0x0000; |
| s->bt.control = 0x00; |
| s->bt.config = 0x0000; |
| s->codec.config[0] = 0x0649; |
| s->codec.config[1] = 0x0000; |
| s->codec.config[2] = 0x0007; |
| s->codec.config[3] = 0x1ffc; |
| s->codec.rxoff = 0; |
| s->codec.rxlen = 0; |
| s->codec.txlen = 0; |
| s->codec.rxavail = 0; |
| s->codec.txavail = 0; |
| |
| omap_eac_format_update(s); |
| omap_eac_interrupt_update(s); |
| } |
| |
| static uint64_t omap_eac_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct omap_eac_s *s = (struct omap_eac_s *) opaque; |
| uint32_t ret; |
| |
| if (size != 2) { |
| return omap_badwidth_read16(opaque, addr); |
| } |
| |
| switch (addr) { |
| case 0x000: /* CPCFR1 */ |
| return s->config[0]; |
| case 0x004: /* CPCFR2 */ |
| return s->config[1]; |
| case 0x008: /* CPCFR3 */ |
| return s->config[2]; |
| case 0x00c: /* CPCFR4 */ |
| return s->config[3]; |
| |
| case 0x010: /* CPTCTL */ |
| return s->control | ((s->codec.rxavail + s->codec.rxlen > 0) << 7) | |
| ((s->codec.txlen < s->codec.txavail) << 5); |
| |
| case 0x014: /* CPTTADR */ |
| return s->address; |
| case 0x018: /* CPTDATL */ |
| return s->data & 0xff; |
| case 0x01c: /* CPTDATH */ |
| return s->data >> 8; |
| case 0x020: /* CPTVSLL */ |
| return s->vtol; |
| case 0x024: /* CPTVSLH */ |
| return s->vtsl | (3 << 5); /* CRDY1 | CRDY2 */ |
| case 0x040: /* MPCTR */ |
| return s->modem.control; |
| case 0x044: /* MPMCCFR */ |
| return s->modem.config; |
| case 0x060: /* BPCTR */ |
| return s->bt.control; |
| case 0x064: /* BPMCCFR */ |
| return s->bt.config; |
| case 0x080: /* AMSCFR */ |
| return s->mixer; |
| case 0x084: /* AMVCTR */ |
| return s->gain[0]; |
| case 0x088: /* AM1VCTR */ |
| return s->gain[1]; |
| case 0x08c: /* AM2VCTR */ |
| return s->gain[2]; |
| case 0x090: /* AM3VCTR */ |
| return s->gain[3]; |
| case 0x094: /* ASTCTR */ |
| return s->att; |
| case 0x098: /* APD1LCR */ |
| return s->max[0]; |
| case 0x09c: /* APD1RCR */ |
| return s->max[1]; |
| case 0x0a0: /* APD2LCR */ |
| return s->max[2]; |
| case 0x0a4: /* APD2RCR */ |
| return s->max[3]; |
| case 0x0a8: /* APD3LCR */ |
| return s->max[4]; |
| case 0x0ac: /* APD3RCR */ |
| return s->max[5]; |
| case 0x0b0: /* APD4R */ |
| return s->max[6]; |
| case 0x0b4: /* ADWR */ |
| /* This should be write-only? Docs list it as read-only. */ |
| return 0x0000; |
| case 0x0b8: /* ADRDR */ |
| if (likely(s->codec.rxlen > 1)) { |
| ret = s->codec.rxbuf[s->codec.rxoff ++]; |
| s->codec.rxlen --; |
| s->codec.rxoff &= EAC_BUF_LEN - 1; |
| return ret; |
| } else if (s->codec.rxlen) { |
| ret = s->codec.rxbuf[s->codec.rxoff ++]; |
| s->codec.rxlen --; |
| s->codec.rxoff &= EAC_BUF_LEN - 1; |
| if (s->codec.rxavail) |
| omap_eac_in_refill(s); |
| omap_eac_in_dmarequest_update(s); |
| return ret; |
| } |
| return 0x0000; |
| case 0x0bc: /* AGCFR */ |
| return s->codec.config[0]; |
| case 0x0c0: /* AGCTR */ |
| return s->codec.config[1] | ((s->codec.config[1] & 2) << 14); |
| case 0x0c4: /* AGCFR2 */ |
| return s->codec.config[2]; |
| case 0x0c8: /* AGCFR3 */ |
| return s->codec.config[3]; |
| case 0x0cc: /* MBPDMACTR */ |
| case 0x0d0: /* MPDDMARR */ |
| case 0x0d8: /* MPUDMARR */ |
| case 0x0e4: /* BPDDMARR */ |
| case 0x0ec: /* BPUDMARR */ |
| return 0x0000; |
| |
| case 0x100: /* VERSION_NUMBER */ |
| return 0x0010; |
| |
| case 0x104: /* SYSCONFIG */ |
| return s->sysconfig; |
| |
| case 0x108: /* SYSSTATUS */ |
| return 1 | 0xe; /* RESETDONE | stuff */ |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_eac_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_eac_s *s = (struct omap_eac_s *) opaque; |
| |
| if (size != 2) { |
| omap_badwidth_write16(opaque, addr, value); |
| return; |
| } |
| |
| switch (addr) { |
| case 0x098: /* APD1LCR */ |
| case 0x09c: /* APD1RCR */ |
| case 0x0a0: /* APD2LCR */ |
| case 0x0a4: /* APD2RCR */ |
| case 0x0a8: /* APD3LCR */ |
| case 0x0ac: /* APD3RCR */ |
| case 0x0b0: /* APD4R */ |
| case 0x0b8: /* ADRDR */ |
| case 0x0d0: /* MPDDMARR */ |
| case 0x0d8: /* MPUDMARR */ |
| case 0x0e4: /* BPDDMARR */ |
| case 0x0ec: /* BPUDMARR */ |
| case 0x100: /* VERSION_NUMBER */ |
| case 0x108: /* SYSSTATUS */ |
| OMAP_RO_REG(addr); |
| return; |
| |
| case 0x000: /* CPCFR1 */ |
| s->config[0] = value & 0xff; |
| omap_eac_format_update(s); |
| break; |
| case 0x004: /* CPCFR2 */ |
| s->config[1] = value & 0xff; |
| omap_eac_format_update(s); |
| break; |
| case 0x008: /* CPCFR3 */ |
| s->config[2] = value & 0xff; |
| omap_eac_format_update(s); |
| break; |
| case 0x00c: /* CPCFR4 */ |
| s->config[3] = value & 0xff; |
| omap_eac_format_update(s); |
| break; |
| |
| case 0x010: /* CPTCTL */ |
| /* Assuming TXF and TXE bits are read-only... */ |
| s->control = value & 0x5f; |
| omap_eac_interrupt_update(s); |
| break; |
| |
| case 0x014: /* CPTTADR */ |
| s->address = value & 0xff; |
| break; |
| case 0x018: /* CPTDATL */ |
| s->data &= 0xff00; |
| s->data |= value & 0xff; |
| break; |
| case 0x01c: /* CPTDATH */ |
| s->data &= 0x00ff; |
| s->data |= value << 8; |
| break; |
| case 0x020: /* CPTVSLL */ |
| s->vtol = value & 0xf8; |
| break; |
| case 0x024: /* CPTVSLH */ |
| s->vtsl = value & 0x9f; |
| break; |
| case 0x040: /* MPCTR */ |
| s->modem.control = value & 0x8f; |
| break; |
| case 0x044: /* MPMCCFR */ |
| s->modem.config = value & 0x7fff; |
| break; |
| case 0x060: /* BPCTR */ |
| s->bt.control = value & 0x8f; |
| break; |
| case 0x064: /* BPMCCFR */ |
| s->bt.config = value & 0x7fff; |
| break; |
| case 0x080: /* AMSCFR */ |
| s->mixer = value & 0x0fff; |
| break; |
| case 0x084: /* AMVCTR */ |
| s->gain[0] = value & 0xffff; |
| break; |
| case 0x088: /* AM1VCTR */ |
| s->gain[1] = value & 0xff7f; |
| break; |
| case 0x08c: /* AM2VCTR */ |
| s->gain[2] = value & 0xff7f; |
| break; |
| case 0x090: /* AM3VCTR */ |
| s->gain[3] = value & 0xff7f; |
| break; |
| case 0x094: /* ASTCTR */ |
| s->att = value & 0xff; |
| break; |
| |
| case 0x0b4: /* ADWR */ |
| s->codec.txbuf[s->codec.txlen ++] = value; |
| if (unlikely(s->codec.txlen == EAC_BUF_LEN || |
| s->codec.txlen == s->codec.txavail)) { |
| if (s->codec.txavail) |
| omap_eac_out_empty(s); |
| /* Discard what couldn't be written */ |
| s->codec.txlen = 0; |
| } |
| break; |
| |
| case 0x0bc: /* AGCFR */ |
| s->codec.config[0] = value & 0x07ff; |
| omap_eac_format_update(s); |
| break; |
| case 0x0c0: /* AGCTR */ |
| s->codec.config[1] = value & 0x780f; |
| omap_eac_format_update(s); |
| break; |
| case 0x0c4: /* AGCFR2 */ |
| s->codec.config[2] = value & 0x003f; |
| omap_eac_format_update(s); |
| break; |
| case 0x0c8: /* AGCFR3 */ |
| s->codec.config[3] = value & 0xffff; |
| omap_eac_format_update(s); |
| break; |
| case 0x0cc: /* MBPDMACTR */ |
| case 0x0d4: /* MPDDMAWR */ |
| case 0x0e0: /* MPUDMAWR */ |
| case 0x0e8: /* BPDDMAWR */ |
| case 0x0f0: /* BPUDMAWR */ |
| break; |
| |
| case 0x104: /* SYSCONFIG */ |
| if (value & (1 << 1)) /* SOFTRESET */ |
| omap_eac_reset(s); |
| s->sysconfig = value & 0x31d; |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| return; |
| } |
| } |
| |
| static const MemoryRegionOps omap_eac_ops = { |
| .read = omap_eac_read, |
| .write = omap_eac_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static struct omap_eac_s *omap_eac_init(struct omap_target_agent_s *ta, |
| qemu_irq irq, qemu_irq *drq, omap_clk fclk, omap_clk iclk) |
| { |
| struct omap_eac_s *s = g_new0(struct omap_eac_s, 1); |
| |
| s->irq = irq; |
| s->codec.rxdrq = *drq ++; |
| s->codec.txdrq = *drq; |
| omap_eac_reset(s); |
| |
| AUD_register_card("OMAP EAC", &s->codec.card); |
| |
| memory_region_init_io(&s->iomem, NULL, &omap_eac_ops, s, "omap.eac", |
| omap_l4_region_size(ta, 0)); |
| omap_l4_attach(ta, 0, &s->iomem); |
| |
| return s; |
| } |
| |
| /* STI/XTI (emulation interface) console - reverse engineered only */ |
| struct omap_sti_s { |
| qemu_irq irq; |
| MemoryRegion iomem; |
| MemoryRegion iomem_fifo; |
| CharDriverState *chr; |
| |
| uint32_t sysconfig; |
| uint32_t systest; |
| uint32_t irqst; |
| uint32_t irqen; |
| uint32_t clkcontrol; |
| uint32_t serial_config; |
| }; |
| |
| #define STI_TRACE_CONSOLE_CHANNEL 239 |
| #define STI_TRACE_CONTROL_CHANNEL 253 |
| |
| static inline void omap_sti_interrupt_update(struct omap_sti_s *s) |
| { |
| qemu_set_irq(s->irq, s->irqst & s->irqen); |
| } |
| |
| static void omap_sti_reset(struct omap_sti_s *s) |
| { |
| s->sysconfig = 0; |
| s->irqst = 0; |
| s->irqen = 0; |
| s->clkcontrol = 0; |
| s->serial_config = 0; |
| |
| omap_sti_interrupt_update(s); |
| } |
| |
| static uint64_t omap_sti_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct omap_sti_s *s = (struct omap_sti_s *) opaque; |
| |
| if (size != 4) { |
| return omap_badwidth_read32(opaque, addr); |
| } |
| |
| switch (addr) { |
| case 0x00: /* STI_REVISION */ |
| return 0x10; |
| |
| case 0x10: /* STI_SYSCONFIG */ |
| return s->sysconfig; |
| |
| case 0x14: /* STI_SYSSTATUS / STI_RX_STATUS / XTI_SYSSTATUS */ |
| return 0x00; |
| |
| case 0x18: /* STI_IRQSTATUS */ |
| return s->irqst; |
| |
| case 0x1c: /* STI_IRQSETEN / STI_IRQCLREN */ |
| return s->irqen; |
| |
| case 0x24: /* STI_ER / STI_DR / XTI_TRACESELECT */ |
| case 0x28: /* STI_RX_DR / XTI_RXDATA */ |
| /* TODO */ |
| return 0; |
| |
| case 0x2c: /* STI_CLK_CTRL / XTI_SCLKCRTL */ |
| return s->clkcontrol; |
| |
| case 0x30: /* STI_SERIAL_CFG / XTI_SCONFIG */ |
| return s->serial_config; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_sti_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_sti_s *s = (struct omap_sti_s *) opaque; |
| |
| if (size != 4) { |
| omap_badwidth_write32(opaque, addr, value); |
| return; |
| } |
| |
| switch (addr) { |
| case 0x00: /* STI_REVISION */ |
| case 0x14: /* STI_SYSSTATUS / STI_RX_STATUS / XTI_SYSSTATUS */ |
| OMAP_RO_REG(addr); |
| return; |
| |
| case 0x10: /* STI_SYSCONFIG */ |
| if (value & (1 << 1)) /* SOFTRESET */ |
| omap_sti_reset(s); |
| s->sysconfig = value & 0xfe; |
| break; |
| |
| case 0x18: /* STI_IRQSTATUS */ |
| s->irqst &= ~value; |
| omap_sti_interrupt_update(s); |
| break; |
| |
| case 0x1c: /* STI_IRQSETEN / STI_IRQCLREN */ |
| s->irqen = value & 0xffff; |
| omap_sti_interrupt_update(s); |
| break; |
| |
| case 0x2c: /* STI_CLK_CTRL / XTI_SCLKCRTL */ |
| s->clkcontrol = value & 0xff; |
| break; |
| |
| case 0x30: /* STI_SERIAL_CFG / XTI_SCONFIG */ |
| s->serial_config = value & 0xff; |
| break; |
| |
| case 0x24: /* STI_ER / STI_DR / XTI_TRACESELECT */ |
| case 0x28: /* STI_RX_DR / XTI_RXDATA */ |
| /* TODO */ |
| return; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| return; |
| } |
| } |
| |
| static const MemoryRegionOps omap_sti_ops = { |
| .read = omap_sti_read, |
| .write = omap_sti_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static uint64_t omap_sti_fifo_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_sti_fifo_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_sti_s *s = (struct omap_sti_s *) opaque; |
| int ch = addr >> 6; |
| uint8_t byte = value; |
| |
| if (size != 1) { |
| omap_badwidth_write8(opaque, addr, size); |
| return; |
| } |
| |
| if (ch == STI_TRACE_CONTROL_CHANNEL) { |
| /* Flush channel <i>value</i>. */ |
| qemu_chr_fe_write(s->chr, (const uint8_t *) "\r", 1); |
| } else if (ch == STI_TRACE_CONSOLE_CHANNEL || 1) { |
| if (value == 0xc0 || value == 0xc3) { |
| /* Open channel <i>ch</i>. */ |
| } else if (value == 0x00) |
| qemu_chr_fe_write(s->chr, (const uint8_t *) "\n", 1); |
| else |
| qemu_chr_fe_write(s->chr, &byte, 1); |
| } |
| } |
| |
| static const MemoryRegionOps omap_sti_fifo_ops = { |
| .read = omap_sti_fifo_read, |
| .write = omap_sti_fifo_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static struct omap_sti_s *omap_sti_init(struct omap_target_agent_s *ta, |
| MemoryRegion *sysmem, |
| hwaddr channel_base, qemu_irq irq, omap_clk clk, |
| CharDriverState *chr) |
| { |
| struct omap_sti_s *s = g_new0(struct omap_sti_s, 1); |
| |
| s->irq = irq; |
| omap_sti_reset(s); |
| |
| s->chr = chr ?: qemu_chr_new("null", "null", NULL); |
| |
| memory_region_init_io(&s->iomem, NULL, &omap_sti_ops, s, "omap.sti", |
| omap_l4_region_size(ta, 0)); |
| omap_l4_attach(ta, 0, &s->iomem); |
| |
| memory_region_init_io(&s->iomem_fifo, NULL, &omap_sti_fifo_ops, s, |
| "omap.sti.fifo", 0x10000); |
| memory_region_add_subregion(sysmem, channel_base, &s->iomem_fifo); |
| |
| return s; |
| } |
| |
| /* L4 Interconnect */ |
| #define L4TA(n) (n) |
| #define L4TAO(n) ((n) + 39) |
| |
| static const struct omap_l4_region_s omap_l4_region[125] = { |
| [ 1] = { 0x40800, 0x800, 32 }, /* Initiator agent */ |
| [ 2] = { 0x41000, 0x1000, 32 }, /* Link agent */ |
| [ 0] = { 0x40000, 0x800, 32 }, /* Address and protection */ |
| [ 3] = { 0x00000, 0x1000, 32 | 16 | 8 }, /* System Control and Pinout */ |
| [ 4] = { 0x01000, 0x1000, 32 | 16 | 8 }, /* L4TAO1 */ |
| [ 5] = { 0x04000, 0x1000, 32 | 16 }, /* 32K Timer */ |
| [ 6] = { 0x05000, 0x1000, 32 | 16 | 8 }, /* L4TAO2 */ |
| [ 7] = { 0x08000, 0x800, 32 }, /* PRCM Region A */ |
| [ 8] = { 0x08800, 0x800, 32 }, /* PRCM Region B */ |
| [ 9] = { 0x09000, 0x1000, 32 | 16 | 8 }, /* L4TAO */ |
| [ 10] = { 0x12000, 0x1000, 32 | 16 | 8 }, /* Test (BCM) */ |
| [ 11] = { 0x13000, 0x1000, 32 | 16 | 8 }, /* L4TA1 */ |
| [ 12] = { 0x14000, 0x1000, 32 }, /* Test/emulation (TAP) */ |
| [ 13] = { 0x15000, 0x1000, 32 | 16 | 8 }, /* L4TA2 */ |
| [ 14] = { 0x18000, 0x1000, 32 | 16 | 8 }, /* GPIO1 */ |
| [ 16] = { 0x1a000, 0x1000, 32 | 16 | 8 }, /* GPIO2 */ |
| [ 18] = { 0x1c000, 0x1000, 32 | 16 | 8 }, /* GPIO3 */ |
| [ 19] = { 0x1e000, 0x1000, 32 | 16 | 8 }, /* GPIO4 */ |
| [ 15] = { 0x19000, 0x1000, 32 | 16 | 8 }, /* Quad GPIO TOP */ |
| [ 17] = { 0x1b000, 0x1000, 32 | 16 | 8 }, /* L4TA3 */ |
| [ 20] = { 0x20000, 0x1000, 32 | 16 | 8 }, /* WD Timer 1 (Secure) */ |
| [ 22] = { 0x22000, 0x1000, 32 | 16 | 8 }, /* WD Timer 2 (OMAP) */ |
| [ 21] = { 0x21000, 0x1000, 32 | 16 | 8 }, /* Dual WD timer TOP */ |
| [ 23] = { 0x23000, 0x1000, 32 | 16 | 8 }, /* L4TA4 */ |
| [ 24] = { 0x28000, 0x1000, 32 | 16 | 8 }, /* GP Timer 1 */ |
| [ 25] = { 0x29000, 0x1000, 32 | 16 | 8 }, /* L4TA7 */ |
| [ 26] = { 0x48000, 0x2000, 32 | 16 | 8 }, /* Emulation (ARM11ETB) */ |
| [ 27] = { 0x4a000, 0x1000, 32 | 16 | 8 }, /* L4TA9 */ |
| [ 28] = { 0x50000, 0x400, 32 | 16 | 8 }, /* Display top */ |
| [ 29] = { 0x50400, 0x400, 32 | 16 | 8 }, /* Display control */ |
| [ 30] = { 0x50800, 0x400, 32 | 16 | 8 }, /* Display RFBI */ |
| [ 31] = { 0x50c00, 0x400, 32 | 16 | 8 }, /* Display encoder */ |
| [ 32] = { 0x51000, 0x1000, 32 | 16 | 8 }, /* L4TA10 */ |
| [ 33] = { 0x52000, 0x400, 32 | 16 | 8 }, /* Camera top */ |
| [ 34] = { 0x52400, 0x400, 32 | 16 | 8 }, /* Camera core */ |
| [ 35] = { 0x52800, 0x400, 32 | 16 | 8 }, /* Camera DMA */ |
| [ 36] = { 0x52c00, 0x400, 32 | 16 | 8 }, /* Camera MMU */ |
| [ 37] = { 0x53000, 0x1000, 32 | 16 | 8 }, /* L4TA11 */ |
| [ 38] = { 0x56000, 0x1000, 32 | 16 | 8 }, /* sDMA */ |
| [ 39] = { 0x57000, 0x1000, 32 | 16 | 8 }, /* L4TA12 */ |
| [ 40] = { 0x58000, 0x1000, 32 | 16 | 8 }, /* SSI top */ |
| [ 41] = { 0x59000, 0x1000, 32 | 16 | 8 }, /* SSI GDD */ |
| [ 42] = { 0x5a000, 0x1000, 32 | 16 | 8 }, /* SSI Port1 */ |
| [ 43] = { 0x5b000, 0x1000, 32 | 16 | 8 }, /* SSI Port2 */ |
| [ 44] = { 0x5c000, 0x1000, 32 | 16 | 8 }, /* L4TA13 */ |
| [ 45] = { 0x5e000, 0x1000, 32 | 16 | 8 }, /* USB OTG */ |
| [ 46] = { 0x5f000, 0x1000, 32 | 16 | 8 }, /* L4TAO4 */ |
| [ 47] = { 0x60000, 0x1000, 32 | 16 | 8 }, /* Emulation (WIN_TRACER1SDRC) */ |
| [ 48] = { 0x61000, 0x1000, 32 | 16 | 8 }, /* L4TA14 */ |
| [ 49] = { 0x62000, 0x1000, 32 | 16 | 8 }, /* Emulation (WIN_TRACER2GPMC) */ |
| [ 50] = { 0x63000, 0x1000, 32 | 16 | 8 }, /* L4TA15 */ |
| [ 51] = { 0x64000, 0x1000, 32 | 16 | 8 }, /* Emulation (WIN_TRACER3OCM) */ |
| [ 52] = { 0x65000, 0x1000, 32 | 16 | 8 }, /* L4TA16 */ |
| [ 53] = { 0x66000, 0x300, 32 | 16 | 8 }, /* Emulation (WIN_TRACER4L4) */ |
| [ 54] = { 0x67000, 0x1000, 32 | 16 | 8 }, /* L4TA17 */ |
| [ 55] = { 0x68000, 0x1000, 32 | 16 | 8 }, /* Emulation (XTI) */ |
| [ 56] = { 0x69000, 0x1000, 32 | 16 | 8 }, /* L4TA18 */ |
| [ 57] = { 0x6a000, 0x1000, 16 | 8 }, /* UART1 */ |
| [ 58] = { 0x6b000, 0x1000, 32 | 16 | 8 }, /* L4TA19 */ |
| [ 59] = { 0x6c000, 0x1000, 16 | 8 }, /* UART2 */ |
| [ 60] = { 0x6d000, 0x1000, 32 | 16 | 8 }, /* L4TA20 */ |
| [ 61] = { 0x6e000, 0x1000, 16 | 8 }, /* UART3 */ |
| [ 62] = { 0x6f000, 0x1000, 32 | 16 | 8 }, /* L4TA21 */ |
| [ 63] = { 0x70000, 0x1000, 16 }, /* I2C1 */ |
| [ 64] = { 0x71000, 0x1000, 32 | 16 | 8 }, /* L4TAO5 */ |
| [ 65] = { 0x72000, 0x1000, 16 }, /* I2C2 */ |
| [ 66] = { 0x73000, 0x1000, 32 | 16 | 8 }, /* L4TAO6 */ |
| [ 67] = { 0x74000, 0x1000, 16 }, /* McBSP1 */ |
| [ 68] = { 0x75000, 0x1000, 32 | 16 | 8 }, /* L4TAO7 */ |
| [ 69] = { 0x76000, 0x1000, 16 }, /* McBSP2 */ |
| [ 70] = { 0x77000, 0x1000, 32 | 16 | 8 }, /* L4TAO8 */ |
| [ 71] = { 0x24000, 0x1000, 32 | 16 | 8 }, /* WD Timer 3 (DSP) */ |
| [ 72] = { 0x25000, 0x1000, 32 | 16 | 8 }, /* L4TA5 */ |
| [ 73] = { 0x26000, 0x1000, 32 | 16 | 8 }, /* WD Timer 4 (IVA) */ |
| [ 74] = { 0x27000, 0x1000, 32 | 16 | 8 }, /* L4TA6 */ |
| [ 75] = { 0x2a000, 0x1000, 32 | 16 | 8 }, /* GP Timer 2 */ |
| [ 76] = { 0x2b000, 0x1000, 32 | 16 | 8 }, /* L4TA8 */ |
| [ 77] = { 0x78000, 0x1000, 32 | 16 | 8 }, /* GP Timer 3 */ |
| [ 78] = { 0x79000, 0x1000, 32 | 16 | 8 }, /* L4TA22 */ |
| [ 79] = { 0x7a000, 0x1000, 32 | 16 | 8 }, /* GP Timer 4 */ |
| [ 80] = { 0x7b000, 0x1000, 32 | 16 | 8 }, /* L4TA23 */ |
| [ 81] = { 0x7c000, 0x1000, 32 | 16 | 8 }, /* GP Timer 5 */ |
| [ 82] = { 0x7d000, 0x1000, 32 | 16 | 8 }, /* L4TA24 */ |
| [ 83] = { 0x7e000, 0x1000, 32 | 16 | 8 }, /* GP Timer 6 */ |
| [ 84] = { 0x7f000, 0x1000, 32 | 16 | 8 }, /* L4TA25 */ |
| [ 85] = { 0x80000, 0x1000, 32 | 16 | 8 }, /* GP Timer 7 */ |
| [ 86] = { 0x81000, 0x1000, 32 | 16 | 8 }, /* L4TA26 */ |
| [ 87] = { 0x82000, 0x1000, 32 | 16 | 8 }, /* GP Timer 8 */ |
| [ 88] = { 0x83000, 0x1000, 32 | 16 | 8 }, /* L4TA27 */ |
| [ 89] = { 0x84000, 0x1000, 32 | 16 | 8 }, /* GP Timer 9 */ |
| [ 90] = { 0x85000, 0x1000, 32 | 16 | 8 }, /* L4TA28 */ |
| [ 91] = { 0x86000, 0x1000, 32 | 16 | 8 }, /* GP Timer 10 */ |
| [ 92] = { 0x87000, 0x1000, 32 | 16 | 8 }, /* L4TA29 */ |
| [ 93] = { 0x88000, 0x1000, 32 | 16 | 8 }, /* GP Timer 11 */ |
| [ 94] = { 0x89000, 0x1000, 32 | 16 | 8 }, /* L4TA30 */ |
| [ 95] = { 0x8a000, 0x1000, 32 | 16 | 8 }, /* GP Timer 12 */ |
| [ 96] = { 0x8b000, 0x1000, 32 | 16 | 8 }, /* L4TA31 */ |
| [ 97] = { 0x90000, 0x1000, 16 }, /* EAC */ |
| [ 98] = { 0x91000, 0x1000, 32 | 16 | 8 }, /* L4TA32 */ |
| [ 99] = { 0x92000, 0x1000, 16 }, /* FAC */ |
| [100] = { 0x93000, 0x1000, 32 | 16 | 8 }, /* L4TA33 */ |
| [101] = { 0x94000, 0x1000, 32 | 16 | 8 }, /* IPC (MAILBOX) */ |
| [102] = { 0x95000, 0x1000, 32 | 16 | 8 }, /* L4TA34 */ |
| [103] = { 0x98000, 0x1000, 32 | 16 | 8 }, /* SPI1 */ |
| [104] = { 0x99000, 0x1000, 32 | 16 | 8 }, /* L4TA35 */ |
| [105] = { 0x9a000, 0x1000, 32 | 16 | 8 }, /* SPI2 */ |
| [106] = { 0x9b000, 0x1000, 32 | 16 | 8 }, /* L4TA36 */ |
| [107] = { 0x9c000, 0x1000, 16 | 8 }, /* MMC SDIO */ |
| [108] = { 0x9d000, 0x1000, 32 | 16 | 8 }, /* L4TAO9 */ |
| [109] = { 0x9e000, 0x1000, 32 | 16 | 8 }, /* MS_PRO */ |
| [110] = { 0x9f000, 0x1000, 32 | 16 | 8 }, /* L4TAO10 */ |
| [111] = { 0xa0000, 0x1000, 32 }, /* RNG */ |
| [112] = { 0xa1000, 0x1000, 32 | 16 | 8 }, /* L4TAO11 */ |
| [113] = { 0xa2000, 0x1000, 32 }, /* DES3DES */ |
| [114] = { 0xa3000, 0x1000, 32 | 16 | 8 }, /* L4TAO12 */ |
| [115] = { 0xa4000, 0x1000, 32 }, /* SHA1MD5 */ |
| [116] = { 0xa5000, 0x1000, 32 | 16 | 8 }, /* L4TAO13 */ |
| [117] = { 0xa6000, 0x1000, 32 }, /* AES */ |
| [118] = { 0xa7000, 0x1000, 32 | 16 | 8 }, /* L4TA37 */ |
| [119] = { 0xa8000, 0x2000, 32 }, /* PKA */ |
| [120] = { 0xaa000, 0x1000, 32 | 16 | 8 }, /* L4TA38 */ |
| [121] = { 0xb0000, 0x1000, 32 }, /* MG */ |
| [122] = { 0xb1000, 0x1000, 32 | 16 | 8 }, |
| [123] = { 0xb2000, 0x1000, 32 }, /* HDQ/1-Wire */ |
| [124] = { 0xb3000, 0x1000, 32 | 16 | 8 }, /* L4TA39 */ |
| }; |
| |
| static const struct omap_l4_agent_info_s omap_l4_agent_info[54] = { |
| { 0, 0, 3, 2 }, /* L4IA initiatior agent */ |
| { L4TAO(1), 3, 2, 1 }, /* Control and pinout module */ |
| { L4TAO(2), 5, 2, 1 }, /* 32K timer */ |
| { L4TAO(3), 7, 3, 2 }, /* PRCM */ |
| { L4TA(1), 10, 2, 1 }, /* BCM */ |
| { L4TA(2), 12, 2, 1 }, /* Test JTAG */ |
| { L4TA(3), 14, 6, 3 }, /* Quad GPIO */ |
| { L4TA(4), 20, 4, 3 }, /* WD timer 1/2 */ |
| { L4TA(7), 24, 2, 1 }, /* GP timer 1 */ |
| { L4TA(9), 26, 2, 1 }, /* ATM11 ETB */ |
| { L4TA(10), 28, 5, 4 }, /* Display subsystem */ |
| { L4TA(11), 33, 5, 4 }, /* Camera subsystem */ |
| { L4TA(12), 38, 2, 1 }, /* sDMA */ |
| { L4TA(13), 40, 5, 4 }, /* SSI */ |
| { L4TAO(4), 45, 2, 1 }, /* USB */ |
| { L4TA(14), 47, 2, 1 }, /* Win Tracer1 */ |
| { L4TA(15), 49, 2, 1 }, /* Win Tracer2 */ |
| { L4TA(16), 51, 2, 1 }, /* Win Tracer3 */ |
| { L4TA(17), 53, 2, 1 }, /* Win Tracer4 */ |
| { L4TA(18), 55, 2, 1 }, /* XTI */ |
| { L4TA(19), 57, 2, 1 }, /* UART1 */ |
| { L4TA(20), 59, 2, 1 }, /* UART2 */ |
| { L4TA(21), 61, 2, 1 }, /* UART3 */ |
| { L4TAO(5), 63, 2, 1 }, /* I2C1 */ |
| { L4TAO(6), 65, 2, 1 }, /* I2C2 */ |
| { L4TAO(7), 67, 2, 1 }, /* McBSP1 */ |
| { L4TAO(8), 69, 2, 1 }, /* McBSP2 */ |
| { L4TA(5), 71, 2, 1 }, /* WD Timer 3 (DSP) */ |
| { L4TA(6), 73, 2, 1 }, /* WD Timer 4 (IVA) */ |
| { L4TA(8), 75, 2, 1 }, /* GP Timer 2 */ |
| { L4TA(22), 77, 2, 1 }, /* GP Timer 3 */ |
| { L4TA(23), 79, 2, 1 }, /* GP Timer 4 */ |
| { L4TA(24), 81, 2, 1 }, /* GP Timer 5 */ |
| { L4TA(25), 83, 2, 1 }, /* GP Timer 6 */ |
| { L4TA(26), 85, 2, 1 }, /* GP Timer 7 */ |
| { L4TA(27), 87, 2, 1 }, /* GP Timer 8 */ |
| { L4TA(28), 89, 2, 1 }, /* GP Timer 9 */ |
| { L4TA(29), 91, 2, 1 }, /* GP Timer 10 */ |
| { L4TA(30), 93, 2, 1 }, /* GP Timer 11 */ |
| { L4TA(31), 95, 2, 1 }, /* GP Timer 12 */ |
| { L4TA(32), 97, 2, 1 }, /* EAC */ |
| { L4TA(33), 99, 2, 1 }, /* FAC */ |
| { L4TA(34), 101, 2, 1 }, /* IPC */ |
| { L4TA(35), 103, 2, 1 }, /* SPI1 */ |
| { L4TA(36), 105, 2, 1 }, /* SPI2 */ |
| { L4TAO(9), 107, 2, 1 }, /* MMC SDIO */ |
| { L4TAO(10), 109, 2, 1 }, |
| { L4TAO(11), 111, 2, 1 }, /* RNG */ |
| { L4TAO(12), 113, 2, 1 }, /* DES3DES */ |
| { L4TAO(13), 115, 2, 1 }, /* SHA1MD5 */ |
| { L4TA(37), 117, 2, 1 }, /* AES */ |
| { L4TA(38), 119, 2, 1 }, /* PKA */ |
| { -1, 121, 2, 1 }, |
| { L4TA(39), 123, 2, 1 }, /* HDQ/1-Wire */ |
| }; |
| |
| #define omap_l4ta(bus, cs) \ |
| omap_l4ta_get(bus, omap_l4_region, omap_l4_agent_info, L4TA(cs)) |
| #define omap_l4tao(bus, cs) \ |
| omap_l4ta_get(bus, omap_l4_region, omap_l4_agent_info, L4TAO(cs)) |
| |
| /* Power, Reset, and Clock Management */ |
| struct omap_prcm_s { |
| qemu_irq irq[3]; |
| struct omap_mpu_state_s *mpu; |
| MemoryRegion iomem0; |
| MemoryRegion iomem1; |
| |
| uint32_t irqst[3]; |
| uint32_t irqen[3]; |
| |
| uint32_t sysconfig; |
| uint32_t voltctrl; |
| uint32_t scratch[20]; |
| |
| uint32_t clksrc[1]; |
| uint32_t clkout[1]; |
| uint32_t clkemul[1]; |
| uint32_t clkpol[1]; |
| uint32_t clksel[8]; |
| uint32_t clken[12]; |
| uint32_t clkctrl[4]; |
| uint32_t clkidle[7]; |
| uint32_t setuptime[2]; |
| |
| uint32_t wkup[3]; |
| uint32_t wken[3]; |
| uint32_t wkst[3]; |
| uint32_t rst[4]; |
| uint32_t rstctrl[1]; |
| uint32_t power[4]; |
| uint32_t rsttime_wkup; |
| |
| uint32_t ev; |
| uint32_t evtime[2]; |
| |
| int dpll_lock, apll_lock[2]; |
| }; |
| |
| static void omap_prcm_int_update(struct omap_prcm_s *s, int dom) |
| { |
| qemu_set_irq(s->irq[dom], s->irqst[dom] & s->irqen[dom]); |
| /* XXX or is the mask applied before PRCM_IRQSTATUS_* ? */ |
| } |
| |
| static uint64_t omap_prcm_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| struct omap_prcm_s *s = (struct omap_prcm_s *) opaque; |
| uint32_t ret; |
| |
| if (size != 4) { |
| return omap_badwidth_read32(opaque, addr); |
| } |
| |
| switch (addr) { |
| case 0x000: /* PRCM_REVISION */ |
| return 0x10; |
| |
| case 0x010: /* PRCM_SYSCONFIG */ |
| return s->sysconfig; |
| |
| case 0x018: /* PRCM_IRQSTATUS_MPU */ |
| return s->irqst[0]; |
| |
| case 0x01c: /* PRCM_IRQENABLE_MPU */ |
| return s->irqen[0]; |
| |
| case 0x050: /* PRCM_VOLTCTRL */ |
| return s->voltctrl; |
| case 0x054: /* PRCM_VOLTST */ |
| return s->voltctrl & 3; |
| |
| case 0x060: /* PRCM_CLKSRC_CTRL */ |
| return s->clksrc[0]; |
| case 0x070: /* PRCM_CLKOUT_CTRL */ |
| return s->clkout[0]; |
| case 0x078: /* PRCM_CLKEMUL_CTRL */ |
| return s->clkemul[0]; |
| case 0x080: /* PRCM_CLKCFG_CTRL */ |
| case 0x084: /* PRCM_CLKCFG_STATUS */ |
| return 0; |
| |
| case 0x090: /* PRCM_VOLTSETUP */ |
| return s->setuptime[0]; |
| |
| case 0x094: /* PRCM_CLKSSETUP */ |
| return s->setuptime[1]; |
| |
| case 0x098: /* PRCM_POLCTRL */ |
| return s->clkpol[0]; |
| |
| case 0x0b0: /* GENERAL_PURPOSE1 */ |
| case 0x0b4: /* GENERAL_PURPOSE2 */ |
| case 0x0b8: /* GENERAL_PURPOSE3 */ |
| case 0x0bc: /* GENERAL_PURPOSE4 */ |
| case 0x0c0: /* GENERAL_PURPOSE5 */ |
| case 0x0c4: /* GENERAL_PURPOSE6 */ |
| case 0x0c8: /* GENERAL_PURPOSE7 */ |
| case 0x0cc: /* GENERAL_PURPOSE8 */ |
| case 0x0d0: /* GENERAL_PURPOSE9 */ |
| case 0x0d4: /* GENERAL_PURPOSE10 */ |
| case 0x0d8: /* GENERAL_PURPOSE11 */ |
| case 0x0dc: /* GENERAL_PURPOSE12 */ |
| case 0x0e0: /* GENERAL_PURPOSE13 */ |
| case 0x0e4: /* GENERAL_PURPOSE14 */ |
| case 0x0e8: /* GENERAL_PURPOSE15 */ |
| case 0x0ec: /* GENERAL_PURPOSE16 */ |
| case 0x0f0: /* GENERAL_PURPOSE17 */ |
| case 0x0f4: /* GENERAL_PURPOSE18 */ |
| case 0x0f8: /* GENERAL_PURPOSE19 */ |
| case 0x0fc: /* GENERAL_PURPOSE20 */ |
| return s->scratch[(addr - 0xb0) >> 2]; |
| |
| case 0x140: /* CM_CLKSEL_MPU */ |
| return s->clksel[0]; |
| case 0x148: /* CM_CLKSTCTRL_MPU */ |
| return s->clkctrl[0]; |
| |
| case 0x158: /* RM_RSTST_MPU */ |
| return s->rst[0]; |
| case 0x1c8: /* PM_WKDEP_MPU */ |
| return s->wkup[0]; |
| case 0x1d4: /* PM_EVGENCTRL_MPU */ |
| return s->ev; |
| case 0x1d8: /* PM_EVEGENONTIM_MPU */ |
| return s->evtime[0]; |
| case 0x1dc: /* PM_EVEGENOFFTIM_MPU */ |
| return s->evtime[1]; |
| case 0x1e0: /* PM_PWSTCTRL_MPU */ |
| return s->power[0]; |
| case 0x1e4: /* PM_PWSTST_MPU */ |
| return 0; |
| |
| case 0x200: /* CM_FCLKEN1_CORE */ |
| return s->clken[0]; |
| case 0x204: /* CM_FCLKEN2_CORE */ |
| return s->clken[1]; |
| case 0x210: /* CM_ICLKEN1_CORE */ |
| return s->clken[2]; |
| case 0x214: /* CM_ICLKEN2_CORE */ |
| return s->clken[3]; |
| case 0x21c: /* CM_ICLKEN4_CORE */ |
| return s->clken[4]; |
| |
| case 0x220: /* CM_IDLEST1_CORE */ |
| /* TODO: check the actual iclk status */ |
| return 0x7ffffff9; |
| case 0x224: /* CM_IDLEST2_CORE */ |
| /* TODO: check the actual iclk status */ |
| return 0x00000007; |
| case 0x22c: /* CM_IDLEST4_CORE */ |
| /* TODO: check the actual iclk status */ |
| return 0x0000001f; |
| |
| case 0x230: /* CM_AUTOIDLE1_CORE */ |
| return s->clkidle[0]; |
| case 0x234: /* CM_AUTOIDLE2_CORE */ |
| return s->clkidle[1]; |
| case 0x238: /* CM_AUTOIDLE3_CORE */ |
| return s->clkidle[2]; |
| case 0x23c: /* CM_AUTOIDLE4_CORE */ |
| return s->clkidle[3]; |
| |
| case 0x240: /* CM_CLKSEL1_CORE */ |
| return s->clksel[1]; |
| case 0x244: /* CM_CLKSEL2_CORE */ |
| return s->clksel[2]; |
| |
| case 0x248: /* CM_CLKSTCTRL_CORE */ |
| return s->clkctrl[1]; |
| |
| case 0x2a0: /* PM_WKEN1_CORE */ |
| return s->wken[0]; |
| case 0x2a4: /* PM_WKEN2_CORE */ |
| return s->wken[1]; |
| |
| case 0x2b0: /* PM_WKST1_CORE */ |
| return s->wkst[0]; |
| case 0x2b4: /* PM_WKST2_CORE */ |
| return s->wkst[1]; |
| case 0x2c8: /* PM_WKDEP_CORE */ |
| return 0x1e; |
| |
| case 0x2e0: /* PM_PWSTCTRL_CORE */ |
| return s->power[1]; |
| case 0x2e4: /* PM_PWSTST_CORE */ |
| return 0x000030 | (s->power[1] & 0xfc00); |
| |
| case 0x300: /* CM_FCLKEN_GFX */ |
| return s->clken[5]; |
| case 0x310: /* CM_ICLKEN_GFX */ |
| return s->clken[6]; |
| case 0x320: /* CM_IDLEST_GFX */ |
| /* TODO: check the actual iclk status */ |
| return 0x00000001; |
| case 0x340: /* CM_CLKSEL_GFX */ |
| return s->clksel[3]; |
| case 0x348: /* CM_CLKSTCTRL_GFX */ |
| return s->clkctrl[2]; |
| case 0x350: /* RM_RSTCTRL_GFX */ |
| return s->rstctrl[0]; |
| case 0x358: /* RM_RSTST_GFX */ |
| return s->rst[1]; |
| case 0x3c8: /* PM_WKDEP_GFX */ |
| return s->wkup[1]; |
| |
| case 0x3e0: /* PM_PWSTCTRL_GFX */ |
| return s->power[2]; |
| case 0x3e4: /* PM_PWSTST_GFX */ |
| return s->power[2] & 3; |
| |
| case 0x400: /* CM_FCLKEN_WKUP */ |
| return s->clken[7]; |
| case 0x410: /* CM_ICLKEN_WKUP */ |
| return s->clken[8]; |
| case 0x420: /* CM_IDLEST_WKUP */ |
| /* TODO: check the actual iclk status */ |
| return 0x0000003f; |
| case 0x430: /* CM_AUTOIDLE_WKUP */ |
| return s->clkidle[4]; |
| case 0x440: /* CM_CLKSEL_WKUP */ |
| return s->clksel[4]; |
| case 0x450: /* RM_RSTCTRL_WKUP */ |
| return 0; |
| case 0x454: /* RM_RSTTIME_WKUP */ |
| return s->rsttime_wkup; |
| case 0x458: /* RM_RSTST_WKUP */ |
| return s->rst[2]; |
| case 0x4a0: /* PM_WKEN_WKUP */ |
| return s->wken[2]; |
| case 0x4b0: /* PM_WKST_WKUP */ |
| return s->wkst[2]; |
| |
| case 0x500: /* CM_CLKEN_PLL */ |
| return s->clken[9]; |
| case 0x520: /* CM_IDLEST_CKGEN */ |
| ret = 0x0000070 | (s->apll_lock[0] << 9) | (s->apll_lock[1] << 8); |
| if (!(s->clksel[6] & 3)) |
| /* Core uses 32-kHz clock */ |
| ret |= 3 << 0; |
| else if (!s->dpll_lock) |
| /* DPLL not locked, core uses ref_clk */ |
| ret |= 1 << 0; |
| else |
| /* Core uses DPLL */ |
| ret |= 2 << 0; |
| return ret; |
| case 0x530: /* CM_AUTOIDLE_PLL */ |
| return s->clkidle[5]; |
| case 0x540: /* CM_CLKSEL1_PLL */ |
| return s->clksel[5]; |
| case 0x544: /* CM_CLKSEL2_PLL */ |
| return s->clksel[6]; |
| |
| case 0x800: /* CM_FCLKEN_DSP */ |
| return s->clken[10]; |
| case 0x810: /* CM_ICLKEN_DSP */ |
| return s->clken[11]; |
| case 0x820: /* CM_IDLEST_DSP */ |
| /* TODO: check the actual iclk status */ |
| return 0x00000103; |
| case 0x830: /* CM_AUTOIDLE_DSP */ |
| return s->clkidle[6]; |
| case 0x840: /* CM_CLKSEL_DSP */ |
| return s->clksel[7]; |
| case 0x848: /* CM_CLKSTCTRL_DSP */ |
| return s->clkctrl[3]; |
| case 0x850: /* RM_RSTCTRL_DSP */ |
| return 0; |
| case 0x858: /* RM_RSTST_DSP */ |
| return s->rst[3]; |
| case 0x8c8: /* PM_WKDEP_DSP */ |
| return s->wkup[2]; |
| case 0x8e0: /* PM_PWSTCTRL_DSP */ |
| return s->power[3]; |
| case 0x8e4: /* PM_PWSTST_DSP */ |
| return 0x008030 | (s->power[3] & 0x3003); |
| |
| case 0x8f0: /* PRCM_IRQSTATUS_DSP */ |
| return s->irqst[1]; |
| case 0x8f4: /* PRCM_IRQENABLE_DSP */ |
| return s->irqen[1]; |
| |
| case 0x8f8: /* PRCM_IRQSTATUS_IVA */ |
| return s->irqst[2]; |
| case 0x8fc: /* PRCM_IRQENABLE_IVA */ |
| return s->irqen[2]; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_prcm_apll_update(struct omap_prcm_s *s) |
| { |
| int mode[2]; |
| |
| mode[0] = (s->clken[9] >> 6) & 3; |
| s->apll_lock[0] = (mode[0] == 3); |
| mode[1] = (s->clken[9] >> 2) & 3; |
| s->apll_lock[1] = (mode[1] == 3); |
| /* TODO: update clocks */ |
| |
| if (mode[0] == 1 || mode[0] == 2 || mode[1] == 1 || mode[1] == 2) |
| fprintf(stderr, "%s: bad EN_54M_PLL or bad EN_96M_PLL\n", |
| __FUNCTION__); |
| } |
| |
| static void omap_prcm_dpll_update(struct omap_prcm_s *s) |
| { |
| omap_clk dpll = omap_findclk(s->mpu, "dpll"); |
| omap_clk dpll_x2 = omap_findclk(s->mpu, "dpll"); |
| omap_clk core = omap_findclk(s->mpu, "core_clk"); |
| int mode = (s->clken[9] >> 0) & 3; |
| int mult, div; |
| |
| mult = (s->clksel[5] >> 12) & 0x3ff; |
| div = (s->clksel[5] >> 8) & 0xf; |
| if (mult == 0 || mult == 1) |
| mode = 1; /* Bypass */ |
| |
| s->dpll_lock = 0; |
| switch (mode) { |
| case 0: |
| fprintf(stderr, "%s: bad EN_DPLL\n", __FUNCTION__); |
| break; |
| case 1: /* Low-power bypass mode (Default) */ |
| case 2: /* Fast-relock bypass mode */ |
| omap_clk_setrate(dpll, 1, 1); |
| omap_clk_setrate(dpll_x2, 1, 1); |
| break; |
| case 3: /* Lock mode */ |
| s->dpll_lock = 1; /* After 20 FINT cycles (ref_clk / (div + 1)). */ |
| |
| omap_clk_setrate(dpll, div + 1, mult); |
| omap_clk_setrate(dpll_x2, div + 1, mult * 2); |
| break; |
| } |
| |
| switch ((s->clksel[6] >> 0) & 3) { |
| case 0: |
| omap_clk_reparent(core, omap_findclk(s->mpu, "clk32-kHz")); |
| break; |
| case 1: |
| omap_clk_reparent(core, dpll); |
| break; |
| case 2: |
| /* Default */ |
| omap_clk_reparent(core, dpll_x2); |
| break; |
| case 3: |
| fprintf(stderr, "%s: bad CORE_CLK_SRC\n", __FUNCTION__); |
| break; |
| } |
| } |
| |
| static void omap_prcm_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| struct omap_prcm_s *s = (struct omap_prcm_s *) opaque; |
| |
| if (size != 4) { |
| omap_badwidth_write32(opaque, addr, value); |
| return; |
| } |
| |
| switch (addr) { |
| case 0x000: /* PRCM_REVISION */ |
| case 0x054: /* PRCM_VOLTST */ |
| case 0x084: /* PRCM_CLKCFG_STATUS */ |
| case 0x1e4: /* PM_PWSTST_MPU */ |
| case 0x220: /* CM_IDLEST1_CORE */ |
| case 0x224: /* CM_IDLEST2_CORE */ |
| case 0x22c: /* CM_IDLEST4_CORE */ |
| case 0x2c8: /* PM_WKDEP_CORE */ |
| case 0x2e4: /* PM_PWSTST_CORE */ |
| case 0x320: /* CM_IDLEST_GFX */ |
| case 0x3e4: /* PM_PWSTST_GFX */ |
| case 0x420: /* CM_IDLEST_WKUP */ |
| case 0x520: /* CM_IDLEST_CKGEN */ |
| case 0x820: /* CM_IDLEST_DSP */ |
| case 0x8e4: /* PM_PWSTST_DSP */ |
| OMAP_RO_REG(addr); |
| return; |
| |
| case 0x010: /* PRCM_SYSCONFIG */ |
| s->sysconfig = value & 1; |
| break; |
| |
| case 0x018: /* PRCM_IRQSTATUS_MPU */ |
| s->irqst[0] &= ~value; |
| omap_prcm_int_update(s, 0); |
| break; |
| case 0x01c: /* PRCM_IRQENABLE_MPU */ |
| s->irqen[0] = value & 0x3f; |
| omap_prcm_int_update(s, 0); |
| break; |
| |
| case 0x050: /* PRCM_VOLTCTRL */ |
| s->voltctrl = value & 0xf1c3; |
| break; |
| |
| case 0x060: /* PRCM_CLKSRC_CTRL */ |
| s->clksrc[0] = value & 0xdb; |
| /* TODO update clocks */ |
| break; |
| |
| case 0x070: /* PRCM_CLKOUT_CTRL */ |
| s->clkout[0] = value & 0xbbbb; |
| /* TODO update clocks */ |
| break; |
| |
| case 0x078: /* PRCM_CLKEMUL_CTRL */ |
| s->clkemul[0] = value & 1; |
| /* TODO update clocks */ |
| break; |
| |
| case 0x080: /* PRCM_CLKCFG_CTRL */ |
| break; |
| |
| case 0x090: /* PRCM_VOLTSETUP */ |
| s->setuptime[0] = value & 0xffff; |
| break; |
| case 0x094: /* PRCM_CLKSSETUP */ |
| s->setuptime[1] = value & 0xffff; |
| break; |
| |
| case 0x098: /* PRCM_POLCTRL */ |
| s->clkpol[0] = value & 0x701; |
| break; |
| |
| case 0x0b0: /* GENERAL_PURPOSE1 */ |
| case 0x0b4: /* GENERAL_PURPOSE2 */ |
| case 0x0b8: /* GENERAL_PURPOSE3 */ |
| case 0x0bc: /* GENERAL_PURPOSE4 */ |
| case 0x0c0: /* GENERAL_PURPOSE5 */ |
| case 0x0c4: /* GENERAL_PURPOSE6 */ |
| case 0x0c8: /* GENERAL_PURPOSE7 */ |
| case 0x0cc: /* GENERAL_PURPOSE8 */ |
| case 0x0d0: /* GENERAL_PURPOSE9 */ |
| case 0x0d4: /* GENERAL_PURPOSE10 */ |
| case 0x0d8: /* GENERAL_PURPOSE11 */ |
| case 0x0dc: /* GENERAL_PURPOSE12 */ |
| case 0x0e0: /* GENERAL_PURPOSE13 */ |
| case 0x0e4: /* GENERAL_PURPOSE14 */ |
| case 0x0e8: /* GENERAL_PURPOSE15 */ |
| case 0x0ec: /* GENERAL_PURPOSE16 */ |
| case 0x0f0: /* GENERAL_PURPOSE17 */ |
| case 0x0f4: /* GENERAL_PURPOSE18 */ |
| case 0x0f8: /* GENERAL_PURPOSE19 */ |
| case 0x0fc: /* GENERAL_PURPOSE20 */ |
| s->scratch[(addr - 0xb0) >> 2] = value; |
| break; |
| |
| case 0x140: /* CM_CLKSEL_MPU */ |
| s->clksel[0] = value & 0x1f; |
| /* TODO update clocks */ |
| break; |
| case 0x148: /* CM_CLKSTCTRL_MPU */ |
| s->clkctrl[0] = value & 0x1f; |
| break; |
| |
| case 0x158: /* RM_RSTST_MPU */ |
| s->rst[0] &= ~value; |
| break; |
| case 0x1c8: /* PM_WKDEP_MPU */ |
| s->wkup[0] = value & 0x15; |
| break; |
| |
| case 0x1d4: /* PM_EVGENCTRL_MPU */ |
| s->ev = value & 0x1f; |
| break; |
| case 0x1d8: /* PM_EVEGENONTIM_MPU */ |
| s->evtime[0] = value; |
| break; |
| case 0x1dc: /* PM_EVEGENOFFTIM_MPU */ |
| s->evtime[1] = value; |
| break; |
| |
| case 0x1e0: /* PM_PWSTCTRL_MPU */ |
| s->power[0] = value & 0xc0f; |
| break; |
| |
| case 0x200: /* CM_FCLKEN1_CORE */ |
| s->clken[0] = value & 0xbfffffff; |
| /* TODO update clocks */ |
| /* The EN_EAC bit only gets/puts func_96m_clk. */ |
| break; |
| case 0x204: /* CM_FCLKEN2_CORE */ |
| s->clken[1] = value & 0x00000007; |
| /* TODO update clocks */ |
| break; |
| case 0x210: /* CM_ICLKEN1_CORE */ |
| s->clken[2] = value & 0xfffffff9; |
| /* TODO update clocks */ |
| /* The EN_EAC bit only gets/puts core_l4_iclk. */ |
| break; |
| case 0x214: /* CM_ICLKEN2_CORE */ |
| s->clken[3] = value & 0x00000007; |
| /* TODO update clocks */ |
| break; |
| case 0x21c: /* CM_ICLKEN4_CORE */ |
| s->clken[4] = value & 0x0000001f; |
| /* TODO update clocks */ |
| break; |
| |
| case 0x230: /* CM_AUTOIDLE1_CORE */ |
| s->clkidle[0] = value & 0xfffffff9; |
| /* TODO update clocks */ |
| break; |
| case 0x234: /* CM_AUTOIDLE2_CORE */ |
| s->clkidle[1] = value & 0x00000007; |
| /* TODO update clocks */ |
| break; |
| case 0x238: /* CM_AUTOIDLE3_CORE */ |
| s->clkidle[2] = value & 0x00000007; |
| /* TODO update clocks */ |
| break; |
| case 0x23c: /* CM_AUTOIDLE4_CORE */ |
| s->clkidle[3] = value & 0x0000001f; |
| /* TODO update clocks */ |
| break; |
| |
| case 0x240: /* CM_CLKSEL1_CORE */ |
| s->clksel[1] = value & 0x0fffbf7f; |
| /* TODO update clocks */ |
| break; |
| |
| case 0x244: /* CM_CLKSEL2_CORE */ |
| s->clksel[2] = value & 0x00fffffc; |
| /* TODO update clocks */ |
| break; |
| |
| case 0x248: /* CM_CLKSTCTRL_CORE */ |
| s->clkctrl[1] = value & 0x7; |
| break; |
| |
| case 0x2a0: /* PM_WKEN1_CORE */ |
| s->wken[0] = value & 0x04667ff8; |
| break; |
| case 0x2a4: /* PM_WKEN2_CORE */ |
| s->wken[1] = value & 0x00000005; |
| break; |
| |
| case 0x2b0: /* PM_WKST1_CORE */ |
| s->wkst[0] &= ~value; |
| break; |
| case 0x2b4: /* PM_WKST2_CORE */ |
| s->wkst[1] &= ~value; |
| break; |
| |
| case 0x2e0: /* PM_PWSTCTRL_CORE */ |
| s->power[1] = (value & 0x00fc3f) | (1 << 2); |
| break; |
| |
| case 0x300: /* CM_FCLKEN_GFX */ |
| s->clken[5] = value & 6; |
| /* TODO update clocks */ |
| break; |
| case 0x310: /* CM_ICLKEN_GFX */ |
| s->clken[6] = value & 1; |
| /* TODO update clocks */ |
| break; |
| case 0x340: /* CM_CLKSEL_GFX */ |
| s->clksel[3] = value & 7; |
| /* TODO update clocks */ |
| break; |
| case 0x348: /* CM_CLKSTCTRL_GFX */ |
| s->clkctrl[2] = value & 1; |
| break; |
| case 0x350: /* RM_RSTCTRL_GFX */ |
| s->rstctrl[0] = value & 1; |
| /* TODO: reset */ |
| break; |
| case 0x358: /* RM_RSTST_GFX */ |
| s->rst[1] &= ~value; |
| break; |
| case 0x3c8: /* PM_WKDEP_GFX */ |
| s->wkup[1] = value & 0x13; |
| break; |
| case 0x3e0: /* PM_PWSTCTRL_GFX */ |
| s->power[2] = (value & 0x00c0f) | (3 << 2); |
| break; |
| |
| case 0x400: /* CM_FCLKEN_WKUP */ |
| s->clken[7] = value & 0xd; |
| /* TODO update clocks */ |
| break; |
| case 0x410: /* CM_ICLKEN_WKUP */ |
| s->clken[8] = value & 0x3f; |
| /* TODO update clocks */ |
| break; |
| case 0x430: /* CM_AUTOIDLE_WKUP */ |
| s->clkidle[4] = value & 0x0000003f; |
| /* TODO update clocks */ |
| break; |
| case 0x440: /* CM_CLKSEL_WKUP */ |
| s->clksel[4] = value & 3; |
| /* TODO update clocks */ |
| break; |
| case 0x450: /* RM_RSTCTRL_WKUP */ |
| /* TODO: reset */ |
| if (value & 2) |
| qemu_system_reset_request(); |
| break; |
| case 0x454: /* RM_RSTTIME_WKUP */ |
| s->rsttime_wkup = value & 0x1fff; |
| break; |
| case 0x458: /* RM_RSTST_WKUP */ |
| s->rst[2] &= ~value; |
| break; |
| case 0x4a0: /* PM_WKEN_WKUP */ |
| s->wken[2] = value & 0x00000005; |
| break; |
| case 0x4b0: /* PM_WKST_WKUP */ |
| s->wkst[2] &= ~value; |
| break; |
| |
| case 0x500: /* CM_CLKEN_PLL */ |
| if (value & 0xffffff30) |
| fprintf(stderr, "%s: write 0s in CM_CLKEN_PLL for " |
| "future compatibility\n", __FUNCTION__); |
| if ((s->clken[9] ^ value) & 0xcc) { |
| s->clken[9] &= ~0xcc; |
| s->clken[9] |= value & 0xcc; |
| omap_prcm_apll_update(s); |
| } |
| if ((s->clken[9] ^ value) & 3) { |
| s->clken[9] &= ~3; |
| s->clken[9] |= value & 3; |
| omap_prcm_dpll_update(s); |
| } |
| break; |
| case 0x530: /* CM_AUTOIDLE_PLL */ |
| s->clkidle[5] = value & 0x000000cf; |
| /* TODO update clocks */ |
| break; |
| case 0x540: /* CM_CLKSEL1_PLL */ |
| if (value & 0xfc4000d7) |
| fprintf(stderr, "%s: write 0s in CM_CLKSEL1_PLL for " |
| "future compatibility\n", __FUNCTION__); |
| if ((s->clksel[5] ^ value) & 0x003fff00) { |
| s->clksel[5] = value & 0x03bfff28; |
| omap_prcm_dpll_update(s); |
| } |
| /* TODO update the other clocks */ |
| |
| s->clksel[5] = value & 0x03bfff28; |
| break; |
| case 0x544: /* CM_CLKSEL2_PLL */ |
| if (value & ~3) |
| fprintf(stderr, "%s: write 0s in CM_CLKSEL2_PLL[31:2] for " |
| "future compatibility\n", __FUNCTION__); |
| if (s->clksel[6] != (value & 3)) { |
| s->clksel[6] = value & 3; |
| omap_prcm_dpll_update(s); |
| } |
| break; |
| |
| case 0x800: /* CM_FCLKEN_DSP */ |
| s->clken[10] = value & 0x501; |
| /* TODO update clocks */ |
| break; |
| case 0x810: /* CM_ICLKEN_DSP */ |
| s->clken[11] = value & 0x2; |
| /* TODO update clocks */ |
| break; |
| case 0x830: /* CM_AUTOIDLE_DSP */ |
| s->clkidle[6] = value & 0x2; |
| /* TODO update clocks */ |
| break; |
| case 0x840: /* CM_CLKSEL_DSP */ |
| s->clksel[7] = value & 0x3fff; |
| /* TODO update clocks */ |
| break; |
| case 0x848: /* CM_CLKSTCTRL_DSP */ |
| s->clkctrl[3] = value & 0x101; |
| break; |
| case 0x850: /* RM_RSTCTRL_DSP */ |
| /* TODO: reset */ |
| break; |
| case 0x858: /* RM_RSTST_DSP */ |
| s->rst[3] &= ~value; |
| break; |
| case 0x8c8: /* PM_WKDEP_DSP */ |
| s->wkup[2] = value & 0x13; |
| break; |
| case 0x8e0: /* PM_PWSTCTRL_DSP */ |
| s->power[3] = (value & 0x03017) | (3 << 2); |
| break; |
| |
| case 0x8f0: /* PRCM_IRQSTATUS_DSP */ |
| s->irqst[1] &= ~value; |
| omap_prcm_int_update(s, 1); |
| break; |
| case 0x8f4: /* PRCM_IRQENABLE_DSP */ |
| s->irqen[1] = value & 0x7; |
| omap_prcm_int_update(s, 1); |
| break; |
| |
| case 0x8f8: /* PRCM_IRQSTATUS_IVA */ |
| s->irqst[2] &= ~value; |
| omap_prcm_int_update(s, 2); |
| break; |
| case 0x8fc: /* PRCM_IRQENABLE_IVA */ |
| s->irqen[2] = value & 0x7; |
| omap_prcm_int_update(s, 2); |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| return; |
| } |
| } |
| |
| static const MemoryRegionOps omap_prcm_ops = { |
| .read = omap_prcm_read, |
| .write = omap_prcm_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_prcm_reset(struct omap_prcm_s *s) |
| { |
| s->sysconfig = 0; |
| s->irqst[0] = 0; |
| s->irqst[1] = 0; |
| s->irqst[2] = 0; |
| s->irqen[0] = 0; |
| s->irqen[1] = 0; |
| s->irqen[2] = 0; |
| s->voltctrl = 0x1040; |
| s->ev = 0x14; |
| s->evtime[0] = 0; |
| s->evtime[1] = 0; |
| s->clkctrl[0] = 0; |
| s->clkctrl[1] = 0; |
| s->clkctrl[2] = 0; |
| s->clkctrl[3] = 0; |
| s->clken[1] = 7; |
| s->clken[3] = 7; |
| s->clken[4] = 0; |
| s->clken[5] = 0; |
| s->clken[6] = 0; |
| s->clken[7] = 0xc; |
| s->clken[8] = 0x3e; |
| s->clken[9] = 0x0d; |
| s->clken[10] = 0; |
| s->clken[11] = 0; |
| s->clkidle[0] = 0; |
| s->clkidle[2] = 7; |
| s->clkidle[3] = 0; |
| s->clkidle[4] = 0; |
| s->clkidle[5] = 0x0c; |
| s->clkidle[6] = 0; |
| s->clksel[0] = 0x01; |
| s->clksel[1] = 0x02100121; |
| s->clksel[2] = 0x00000000; |
| s->clksel[3] = 0x01; |
| s->clksel[4] = 0; |
| s->clksel[7] = 0x0121; |
| s->wkup[0] = 0x15; |
| s->wkup[1] = 0x13; |
| s->wkup[2] = 0x13; |
| s->wken[0] = 0x04667ff8; |
| s->wken[1] = 0x00000005; |
| s->wken[2] = 5; |
| s->wkst[0] = 0; |
| s->wkst[1] = 0; |
| s->wkst[2] = 0; |
| s->power[0] = 0x00c; |
| s->power[1] = 4; |
| s->power[2] = 0x0000c; |
| s->power[3] = 0x14; |
| s->rstctrl[0] = 1; |
| s->rst[3] = 1; |
| omap_prcm_apll_update(s); |
| omap_prcm_dpll_update(s); |
| } |
| |
| static void omap_prcm_coldreset(struct omap_prcm_s *s) |
| { |
| s->setuptime[0] = 0; |
| s->setuptime[1] = 0; |
| memset(&s->scratch, 0, sizeof(s->scratch)); |
| s->rst[0] = 0x01; |
| s->rst[1] = 0x00; |
| s->rst[2] = 0x01; |
| s->clken[0] = 0; |
| s->clken[2] = 0; |
| s->clkidle[1] = 0; |
| s->clksel[5] = 0; |
| s->clksel[6] = 2; |
| s->clksrc[0] = 0x43; |
| s->clkout[0] = 0x0303; |
| s->clkemul[0] = 0; |
| s->clkpol[0] = 0x100; |
| s->rsttime_wkup = 0x1002; |
| |
| omap_prcm_reset(s); |
| } |
| |
| static struct omap_prcm_s *omap_prcm_init(struct omap_target_agent_s *ta, |
| qemu_irq mpu_int, qemu_irq dsp_int, qemu_irq iva_int, |
| struct omap_mpu_state_s *mpu) |
| { |
| struct omap_prcm_s *s = g_new0(struct omap_prcm_s, 1); |
| |
| s->irq[0] = mpu_int; |
| s->irq[1] = dsp_int; |
| s->irq[2] = iva_int; |
| s->mpu = mpu; |
| omap_prcm_coldreset(s); |
| |
| memory_region_init_io(&s->iomem0, NULL, &omap_prcm_ops, s, "omap.pcrm0", |
| omap_l4_region_size(ta, 0)); |
| memory_region_init_io(&s->iomem1, NULL, &omap_prcm_ops, s, "omap.pcrm1", |
| omap_l4_region_size(ta, 1)); |
| omap_l4_attach(ta, 0, &s->iomem0); |
| omap_l4_attach(ta, 1, &s->iomem1); |
| |
| return s; |
| } |
| |
| /* System and Pinout control */ |
| struct omap_sysctl_s { |
| struct omap_mpu_state_s *mpu; |
| MemoryRegion iomem; |
| |
| uint32_t sysconfig; |
| uint32_t devconfig; |
| uint32_t psaconfig; |
| uint32_t padconf[0x45]; |
| uint8_t obs; |
| uint32_t msuspendmux[5]; |
| }; |
| |
| static uint32_t omap_sysctl_read8(void *opaque, hwaddr addr) |
| { |
| |
| struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; |
| int pad_offset, byte_offset; |
| int value; |
| |
| switch (addr) { |
| case 0x030 ... 0x140: /* CONTROL_PADCONF - only used in the POP */ |
| pad_offset = (addr - 0x30) >> 2; |
| byte_offset = (addr - 0x30) & (4 - 1); |
| |
| value = s->padconf[pad_offset]; |
| value = (value >> (byte_offset * 8)) & 0xff; |
| |
| return value; |
| |
| default: |
| break; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static uint32_t omap_sysctl_read(void *opaque, hwaddr addr) |
| { |
| struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; |
| |
| switch (addr) { |
| case 0x000: /* CONTROL_REVISION */ |
| return 0x20; |
| |
| case 0x010: /* CONTROL_SYSCONFIG */ |
| return s->sysconfig; |
| |
| case 0x030 ... 0x140: /* CONTROL_PADCONF - only used in the POP */ |
| return s->padconf[(addr - 0x30) >> 2]; |
| |
| case 0x270: /* CONTROL_DEBOBS */ |
| return s->obs; |
| |
| case 0x274: /* CONTROL_DEVCONF */ |
| return s->devconfig; |
| |
| case 0x28c: /* CONTROL_EMU_SUPPORT */ |
| return 0; |
| |
| case 0x290: /* CONTROL_MSUSPENDMUX_0 */ |
| return s->msuspendmux[0]; |
| case 0x294: /* CONTROL_MSUSPENDMUX_1 */ |
| return s->msuspendmux[1]; |
| case 0x298: /* CONTROL_MSUSPENDMUX_2 */ |
| return s->msuspendmux[2]; |
| case 0x29c: /* CONTROL_MSUSPENDMUX_3 */ |
| return s->msuspendmux[3]; |
| case 0x2a0: /* CONTROL_MSUSPENDMUX_4 */ |
| return s->msuspendmux[4]; |
| case 0x2a4: /* CONTROL_MSUSPENDMUX_5 */ |
| return 0; |
| |
| case 0x2b8: /* CONTROL_PSA_CTRL */ |
| return s->psaconfig; |
| case 0x2bc: /* CONTROL_PSA_CMD */ |
| case 0x2c0: /* CONTROL_PSA_VALUE */ |
| return 0; |
| |
| case 0x2b0: /* CONTROL_SEC_CTRL */ |
| return 0x800000f1; |
| case 0x2d0: /* CONTROL_SEC_EMU */ |
| return 0x80000015; |
| case 0x2d4: /* CONTROL_SEC_TAP */ |
| return 0x8000007f; |
| case 0x2b4: /* CONTROL_SEC_TEST */ |
| case 0x2f0: /* CONTROL_SEC_STATUS */ |
| case 0x2f4: /* CONTROL_SEC_ERR_STATUS */ |
| /* Secure mode is not present on general-pusrpose device. Outside |
| * secure mode these values cannot be read or written. */ |
| return 0; |
| |
| case 0x2d8: /* CONTROL_OCM_RAM_PERM */ |
| return 0xff; |
| case 0x2dc: /* CONTROL_OCM_PUB_RAM_ADD */ |
| case 0x2e0: /* CONTROL_EXT_SEC_RAM_START_ADD */ |
| case 0x2e4: /* CONTROL_EXT_SEC_RAM_STOP_ADD */ |
| /* No secure mode so no Extended Secure RAM present. */ |
| return 0; |
| |
| case 0x2f8: /* CONTROL_STATUS */ |
| /* Device Type => General-purpose */ |
| return 0x0300; |
| case 0x2fc: /* CONTROL_GENERAL_PURPOSE_STATUS */ |
| |
| case 0x300: /* CONTROL_RPUB_KEY_H_0 */ |
| case 0x304: /* CONTROL_RPUB_KEY_H_1 */ |
| case 0x308: /* CONTROL_RPUB_KEY_H_2 */ |
| case 0x30c: /* CONTROL_RPUB_KEY_H_3 */ |
| return 0xdecafbad; |
| |
| case 0x310: /* CONTROL_RAND_KEY_0 */ |
| case 0x314: /* CONTROL_RAND_KEY_1 */ |
| case 0x318: /* CONTROL_RAND_KEY_2 */ |
| case 0x31c: /* CONTROL_RAND_KEY_3 */ |
| case 0x320: /* CONTROL_CUST_KEY_0 */ |
| case 0x324: /* CONTROL_CUST_KEY_1 */ |
| case 0x330: /* CONTROL_TEST_KEY_0 */ |
| case 0x334: /* CONTROL_TEST_KEY_1 */ |
| case 0x338: /* CONTROL_TEST_KEY_2 */ |
| case 0x33c: /* CONTROL_TEST_KEY_3 */ |
| case 0x340: /* CONTROL_TEST_KEY_4 */ |
| case 0x344: /* CONTROL_TEST_KEY_5 */ |
| case 0x348: /* CONTROL_TEST_KEY_6 */ |
| case 0x34c: /* CONTROL_TEST_KEY_7 */ |
| case 0x350: /* CONTROL_TEST_KEY_8 */ |
| case 0x354: /* CONTROL_TEST_KEY_9 */ |
| /* Can only be accessed in secure mode and when C_FieldAccEnable |
| * bit is set in CONTROL_SEC_CTRL. |
| * TODO: otherwise an interconnect access error is generated. */ |
| return 0; |
| } |
| |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_sysctl_write8(void *opaque, hwaddr addr, |
| uint32_t value) |
| { |
| struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; |
| int pad_offset, byte_offset; |
| int prev_value; |
| |
| switch (addr) { |
| case 0x030 ... 0x140: /* CONTROL_PADCONF - only used in the POP */ |
| pad_offset = (addr - 0x30) >> 2; |
| byte_offset = (addr - 0x30) & (4 - 1); |
| |
| prev_value = s->padconf[pad_offset]; |
| prev_value &= ~(0xff << (byte_offset * 8)); |
| prev_value |= ((value & 0x1f1f1f1f) << (byte_offset * 8)) & 0x1f1f1f1f; |
| s->padconf[pad_offset] = prev_value; |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| break; |
| } |
| } |
| |
| static void omap_sysctl_write(void *opaque, hwaddr addr, |
| uint32_t value) |
| { |
| struct omap_sysctl_s *s = (struct omap_sysctl_s *) opaque; |
| |
| switch (addr) { |
| case 0x000: /* CONTROL_REVISION */ |
| case 0x2a4: /* CONTROL_MSUSPENDMUX_5 */ |
| case 0x2c0: /* CONTROL_PSA_VALUE */ |
| case 0x2f8: /* CONTROL_STATUS */ |
| case 0x2fc: /* CONTROL_GENERAL_PURPOSE_STATUS */ |
| case 0x300: /* CONTROL_RPUB_KEY_H_0 */ |
| case 0x304: /* CONTROL_RPUB_KEY_H_1 */ |
| case 0x308: /* CONTROL_RPUB_KEY_H_2 */ |
| case 0x30c: /* CONTROL_RPUB_KEY_H_3 */ |
| case 0x310: /* CONTROL_RAND_KEY_0 */ |
| case 0x314: /* CONTROL_RAND_KEY_1 */ |
| case 0x318: /* CONTROL_RAND_KEY_2 */ |
| case 0x31c: /* CONTROL_RAND_KEY_3 */ |
| case 0x320: /* CONTROL_CUST_KEY_0 */ |
| case 0x324: /* CONTROL_CUST_KEY_1 */ |
| case 0x330: /* CONTROL_TEST_KEY_0 */ |
| case 0x334: /* CONTROL_TEST_KEY_1 */ |
| case 0x338: /* CONTROL_TEST_KEY_2 */ |
| case 0x33c: /* CONTROL_TEST_KEY_3 */ |
| case 0x340: /* CONTROL_TEST_KEY_4 */ |
| case 0x344: /* CONTROL_TEST_KEY_5 */ |
| case 0x348: /* CONTROL_TEST_KEY_6 */ |
| case 0x34c: /* CONTROL_TEST_KEY_7 */ |
| case 0x350: /* CONTROL_TEST_KEY_8 */ |
| case 0x354: /* CONTROL_TEST_KEY_9 */ |
| OMAP_RO_REG(addr); |
| return; |
| |
| case 0x010: /* CONTROL_SYSCONFIG */ |
| s->sysconfig = value & 0x1e; |
| break; |
| |
| case 0x030 ... 0x140: /* CONTROL_PADCONF - only used in the POP */ |
| /* XXX: should check constant bits */ |
| s->padconf[(addr - 0x30) >> 2] = value & 0x1f1f1f1f; |
| break; |
| |
| case 0x270: /* CONTROL_DEBOBS */ |
| s->obs = value & 0xff; |
| break; |
| |
| case 0x274: /* CONTROL_DEVCONF */ |
| s->devconfig = value & 0xffffc7ff; |
| break; |
| |
| case 0x28c: /* CONTROL_EMU_SUPPORT */ |
| break; |
| |
| case 0x290: /* CONTROL_MSUSPENDMUX_0 */ |
| s->msuspendmux[0] = value & 0x3fffffff; |
| break; |
| case 0x294: /* CONTROL_MSUSPENDMUX_1 */ |
| s->msuspendmux[1] = value & 0x3fffffff; |
| break; |
| case 0x298: /* CONTROL_MSUSPENDMUX_2 */ |
| s->msuspendmux[2] = value & 0x3fffffff; |
| break; |
| case 0x29c: /* CONTROL_MSUSPENDMUX_3 */ |
| s->msuspendmux[3] = value & 0x3fffffff; |
| break; |
| case 0x2a0: /* CONTROL_MSUSPENDMUX_4 */ |
| s->msuspendmux[4] = value & 0x3fffffff; |
| break; |
| |
| case 0x2b8: /* CONTROL_PSA_CTRL */ |
| s->psaconfig = value & 0x1c; |
| s->psaconfig |= (value & 0x20) ? 2 : 1; |
| break; |
| case 0x2bc: /* CONTROL_PSA_CMD */ |
| break; |
| |
| case 0x2b0: /* CONTROL_SEC_CTRL */ |
| case 0x2b4: /* CONTROL_SEC_TEST */ |
| case 0x2d0: /* CONTROL_SEC_EMU */ |
| case 0x2d4: /* CONTROL_SEC_TAP */ |
| case 0x2d8: /* CONTROL_OCM_RAM_PERM */ |
| case 0x2dc: /* CONTROL_OCM_PUB_RAM_ADD */ |
| case 0x2e0: /* CONTROL_EXT_SEC_RAM_START_ADD */ |
| case 0x2e4: /* CONTROL_EXT_SEC_RAM_STOP_ADD */ |
| case 0x2f0: /* CONTROL_SEC_STATUS */ |
| case 0x2f4: /* CONTROL_SEC_ERR_STATUS */ |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| return; |
| } |
| } |
| |
| static const MemoryRegionOps omap_sysctl_ops = { |
| .old_mmio = { |
| .read = { |
| omap_sysctl_read8, |
| omap_badwidth_read32, /* TODO */ |
| omap_sysctl_read, |
| }, |
| .write = { |
| omap_sysctl_write8, |
| omap_badwidth_write32, /* TODO */ |
| omap_sysctl_write, |
| }, |
| }, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void omap_sysctl_reset(struct omap_sysctl_s *s) |
| { |
| /* (power-on reset) */ |
| s->sysconfig = 0; |
| s->obs = 0; |
| s->devconfig = 0x0c000000; |
| s->msuspendmux[0] = 0x00000000; |
| s->msuspendmux[1] = 0x00000000; |
| s->msuspendmux[2] = 0x00000000; |
| s->msuspendmux[3] = 0x00000000; |
| s->msuspendmux[4] = 0x00000000; |
| s->psaconfig = 1; |
| |
| s->padconf[0x00] = 0x000f0f0f; |
| s->padconf[0x01] = 0x00000000; |
| s->padconf[0x02] = 0x00000000; |
| s->padconf[0x03] = 0x00000000; |
| s->padconf[0x04] = 0x00000000; |
| s->padconf[0x05] = 0x00000000; |
| s->padconf[0x06] = 0x00000000; |
| s->padconf[0x07] = 0x00000000; |
| s->padconf[0x08] = 0x08080800; |
| s->padconf[0x09] = 0x08080808; |
| s->padconf[0x0a] = 0x08080808; |
| s->padconf[0x0b] = 0x08080808; |
| s->padconf[0x0c] = 0x08080808; |
| s->padconf[0x0d] = 0x08080800; |
| s->padconf[0x0e] = 0x08080808; |
| s->padconf[0x0f] = 0x08080808; |
| s->padconf[0x10] = 0x18181808; /* | 0x07070700 if SBoot3 */ |
| s->padconf[0x11] = 0x18181818; /* | 0x07070707 if SBoot3 */ |
| s->padconf[0x12] = 0x18181818; /* | 0x07070707 if SBoot3 */ |
| s->padconf[0x13] = 0x18181818; /* | 0x07070707 if SBoot3 */ |
| s->padconf[0x14] = 0x18181818; /* | 0x00070707 if SBoot3 */ |
| s->padconf[0x15] = 0x18181818; |
| s->padconf[0x16] = 0x18181818; /* | 0x07000000 if SBoot3 */ |
| s->padconf[0x17] = 0x1f001f00; |
| s->padconf[0x18] = 0x1f1f1f1f; |
| s->padconf[0x19] = 0x00000000; |
| s->padconf[0x1a] = 0x1f180000; |
| s->padconf[0x1b] = 0x00001f1f; |
| s->padconf[0x1c] = 0x1f001f00; |
| s->padconf[0x1d] = 0x00000000; |
| s->padconf[0x1e] = 0x00000000; |
| s->padconf[0x1f] = 0x08000000; |
| s->padconf[0x20] = 0x08080808; |
| s->padconf[0x21] = 0x08080808; |
| s->padconf[0x22] = 0x0f080808; |
| s->padconf[0x23] = 0x0f0f0f0f; |
| s->padconf[0x24] = 0x000f0f0f; |
| s->padconf[0x25] = 0x1f1f1f0f; |
| s->padconf[0x26] = 0x080f0f1f; |
| s->padconf[0x27] = 0x070f1808; |
| s->padconf[0x28] = 0x0f070707; |
| s->padconf[0x29] = 0x000f0f1f; |
| s->padconf[0x2a] = 0x0f0f0f1f; |
| s->padconf[0x2b] = 0x08000000; |
| s->padconf[0x2c] = 0x0000001f; |
| s->padconf[0x2d] = 0x0f0f1f00; |
| s->padconf[0x2e] = 0x1f1f0f0f; |
| s->padconf[0x2f] = 0x0f1f1f1f; |
| s->padconf[0x30] = 0x0f0f0f0f; |
| s->padconf[0x31] = 0x0f1f0f1f; |
| s->padconf[0x32] = 0x0f0f0f0f; |
| s->padconf[0x33] = 0x0f1f0f1f; |
| s->padconf[0x34] = 0x1f1f0f0f; |
| s->padconf[0x35] = 0x0f0f1f1f; |
| s->padconf[0x36] = 0x0f0f1f0f; |
| s->padconf[0x37] = 0x0f0f0f0f; |
| s->padconf[0x38] = 0x1f18180f; |
| s->padconf[0x39] = 0x1f1f1f1f; |
| s->padconf[0x3a] = 0x00001f1f; |
| s->padconf[0x3b] = 0x00000000; |
| s->padconf[0x3c] = 0x00000000; |
| s->padconf[0x3d] = 0x0f0f0f0f; |
| s->padconf[0x3e] = 0x18000f0f; |
| s->padconf[0x3f] = 0x00070000; |
| s->padconf[0x40] = 0x00000707; |
| s->padconf[0x41] = 0x0f1f0700; |
| s->padconf[0x42] = 0x1f1f070f; |
| s->padconf[0x43] = 0x0008081f; |
| s->padconf[0x44] = 0x00000800; |
| } |
| |
| static struct omap_sysctl_s *omap_sysctl_init(struct omap_target_agent_s *ta, |
| omap_clk iclk, struct omap_mpu_state_s *mpu) |
| { |
| struct omap_sysctl_s *s = g_new0(struct omap_sysctl_s, 1); |
| |
| s->mpu = mpu; |
| omap_sysctl_reset(s); |
| |
| memory_region_init_io(&s->iomem, NULL, &omap_sysctl_ops, s, "omap.sysctl", |
| omap_l4_region_size(ta, 0)); |
| omap_l4_attach(ta, 0, &s->iomem); |
| |
| return s; |
| } |
| |
| /* General chip reset */ |
| static void omap2_mpu_reset(void *opaque) |
| { |
| struct omap_mpu_state_s *mpu = (struct omap_mpu_state_s *) opaque; |
| |
| omap_dma_reset(mpu->dma); |
| omap_prcm_reset(mpu->prcm); |
| omap_sysctl_reset(mpu->sysc); |
| omap_gp_timer_reset(mpu->gptimer[0]); |
| omap_gp_timer_reset(mpu->gptimer[1]); |
| omap_gp_timer_reset(mpu->gptimer[2]); |
| omap_gp_timer_reset(mpu->gptimer[3]); |
| omap_gp_timer_reset(mpu->gptimer[4]); |
| omap_gp_timer_reset(mpu->gptimer[5]); |
| omap_gp_timer_reset(mpu->gptimer[6]); |
| omap_gp_timer_reset(mpu->gptimer[7]); |
| omap_gp_timer_reset(mpu->gptimer[8]); |
| omap_gp_timer_reset(mpu->gptimer[9]); |
| omap_gp_timer_reset(mpu->gptimer[10]); |
| omap_gp_timer_reset(mpu->gptimer[11]); |
| omap_synctimer_reset(mpu->synctimer); |
| omap_sdrc_reset(mpu->sdrc); |
| omap_gpmc_reset(mpu->gpmc); |
| omap_dss_reset(mpu->dss); |
| omap_uart_reset(mpu->uart[0]); |
| omap_uart_reset(mpu->uart[1]); |
| omap_uart_reset(mpu->uart[2]); |
| omap_mmc_reset(mpu->mmc); |
| omap_mcspi_reset(mpu->mcspi[0]); |
| omap_mcspi_reset(mpu->mcspi[1]); |
| cpu_reset(CPU(mpu->cpu)); |
| } |
| |
| static int omap2_validate_addr(struct omap_mpu_state_s *s, |
| hwaddr addr) |
| { |
| return 1; |
| } |
| |
| static const struct dma_irq_map omap2_dma_irq_map[] = { |
| { 0, OMAP_INT_24XX_SDMA_IRQ0 }, |
| { 0, OMAP_INT_24XX_SDMA_IRQ1 }, |
| { 0, OMAP_INT_24XX_SDMA_IRQ2 }, |
| { 0, OMAP_INT_24XX_SDMA_IRQ3 }, |
| }; |
| |
| struct omap_mpu_state_s *omap2420_mpu_init(MemoryRegion *sysmem, |
| unsigned long sdram_size, |
| const char *core) |
| { |
| struct omap_mpu_state_s *s = g_new0(struct omap_mpu_state_s, 1); |
| qemu_irq dma_irqs[4]; |
| DriveInfo *dinfo; |
| int i; |
| SysBusDevice *busdev; |
| struct omap_target_agent_s *ta; |
| |
| /* Core */ |
| s->mpu_model = omap2420; |
| s->cpu = cpu_arm_init(core ?: "arm1136-r2"); |
| if (s->cpu == NULL) { |
| fprintf(stderr, "Unable to find CPU definition\n"); |
| exit(1); |
| } |
| s->sdram_size = sdram_size; |
| s->sram_size = OMAP242X_SRAM_SIZE; |
| |
| s->wakeup = qemu_allocate_irq(omap_mpu_wakeup, s, 0); |
| |
| /* Clocks */ |
| omap_clk_init(s); |
| |
| /* Memory-mapped stuff */ |
| memory_region_allocate_system_memory(&s->sdram, NULL, "omap2.dram", |
| s->sdram_size); |
| memory_region_add_subregion(sysmem, OMAP2_Q2_BASE, &s->sdram); |
| memory_region_init_ram(&s->sram, NULL, "omap2.sram", s->sram_size, |
| &error_fatal); |
| vmstate_register_ram_global(&s->sram); |
| memory_region_add_subregion(sysmem, OMAP2_SRAM_BASE, &s->sram); |
| |
| s->l4 = omap_l4_init(sysmem, OMAP2_L4_BASE, 54); |
| |
| /* Actually mapped at any 2K boundary in the ARM11 private-peripheral if */ |
| s->ih[0] = qdev_create(NULL, "omap2-intc"); |
| qdev_prop_set_uint8(s->ih[0], "revision", 0x21); |
| qdev_prop_set_ptr(s->ih[0], "fclk", omap_findclk(s, "mpu_intc_fclk")); |
| qdev_prop_set_ptr(s->ih[0], "iclk", omap_findclk(s, "mpu_intc_iclk")); |
| qdev_init_nofail(s->ih[0]); |
| busdev = SYS_BUS_DEVICE(s->ih[0]); |
| sysbus_connect_irq(busdev, 0, |
| qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_IRQ)); |
| sysbus_connect_irq(busdev, 1, |
| qdev_get_gpio_in(DEVICE(s->cpu), ARM_CPU_FIQ)); |
| sysbus_mmio_map(busdev, 0, 0x480fe000); |
| s->prcm = omap_prcm_init(omap_l4tao(s->l4, 3), |
| qdev_get_gpio_in(s->ih[0], |
| OMAP_INT_24XX_PRCM_MPU_IRQ), |
| NULL, NULL, s); |
| |
| s->sysc = omap_sysctl_init(omap_l4tao(s->l4, 1), |
| omap_findclk(s, "omapctrl_iclk"), s); |
| |
| for (i = 0; i < 4; i++) { |
| dma_irqs[i] = qdev_get_gpio_in(s->ih[omap2_dma_irq_map[i].ih], |
| omap2_dma_irq_map[i].intr); |
| } |
| s->dma = omap_dma4_init(0x48056000, dma_irqs, sysmem, s, 256, 32, |
| omap_findclk(s, "sdma_iclk"), |
| omap_findclk(s, "sdma_fclk")); |
| s->port->addr_valid = omap2_validate_addr; |
| |
| /* Register SDRAM and SRAM ports for fast DMA transfers. */ |
| soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(&s->sdram), |
| OMAP2_Q2_BASE, s->sdram_size); |
| soc_dma_port_add_mem(s->dma, memory_region_get_ram_ptr(&s->sram), |
| OMAP2_SRAM_BASE, s->sram_size); |
| |
| s->uart[0] = omap2_uart_init(sysmem, omap_l4ta(s->l4, 19), |
| qdev_get_gpio_in(s->ih[0], |
| OMAP_INT_24XX_UART1_IRQ), |
| omap_findclk(s, "uart1_fclk"), |
| omap_findclk(s, "uart1_iclk"), |
| s->drq[OMAP24XX_DMA_UART1_TX], |
| s->drq[OMAP24XX_DMA_UART1_RX], |
| "uart1", |
| serial_hds[0]); |
| s->uart[1] = omap2_uart_init(sysmem, omap_l4ta(s->l4, 20), |
| qdev_get_gpio_in(s->ih[0], |
| OMAP_INT_24XX_UART2_IRQ), |
| omap_findclk(s, "uart2_fclk"), |
| omap_findclk(s, "uart2_iclk"), |
| s->drq[OMAP24XX_DMA_UART2_TX], |
| s->drq[OMAP24XX_DMA_UART2_RX], |
| "uart2", |
| serial_hds[0] ? serial_hds[1] : NULL); |
| s->uart[2] = omap2_uart_init(sysmem, omap_l4ta(s->l4, 21), |
| qdev_get_gpio_in(s->ih[0], |
| OMAP_INT_24XX_UART3_IRQ), |
| omap_findclk(s, "uart3_fclk"), |
| omap_findclk(s, "uart3_iclk"), |
| s->drq[OMAP24XX_DMA_UART3_TX], |
| s->drq[OMAP24XX_DMA_UART3_RX], |
| "uart3", |
| serial_hds[0] && serial_hds[1] ? serial_hds[2] : NULL); |
| |
| s->gptimer[0] = omap_gp_timer_init(omap_l4ta(s->l4, 7), |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_GPTIMER1), |
| omap_findclk(s, "wu_gpt1_clk"), |
| omap_findclk(s, "wu_l4_iclk")); |
| s->gptimer[1] = omap_gp_timer_init(omap_l4ta(s->l4, 8), |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_GPTIMER2), |
| omap_findclk(s, "core_gpt2_clk"), |
| omap_findclk(s, "core_l4_iclk")); |
| s->gptimer[2] = omap_gp_timer_init(omap_l4ta(s->l4, 22), |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_GPTIMER3), |
| omap_findclk(s, "core_gpt3_clk"), |
| omap_findclk(s, "core_l4_iclk")); |
| s->gptimer[3] = omap_gp_timer_init(omap_l4ta(s->l4, 23), |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_GPTIMER4), |
| omap_findclk(s, "core_gpt4_clk"), |
| omap_findclk(s, "core_l4_iclk")); |
| s->gptimer[4] = omap_gp_timer_init(omap_l4ta(s->l4, 24), |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_GPTIMER5), |
| omap_findclk(s, "core_gpt5_clk"), |
| omap_findclk(s, "core_l4_iclk")); |
| s->gptimer[5] = omap_gp_timer_init(omap_l4ta(s->l4, 25), |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_GPTIMER6), |
| omap_findclk(s, "core_gpt6_clk"), |
| omap_findclk(s, "core_l4_iclk")); |
| s->gptimer[6] = omap_gp_timer_init(omap_l4ta(s->l4, 26), |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_GPTIMER7), |
| omap_findclk(s, "core_gpt7_clk"), |
| omap_findclk(s, "core_l4_iclk")); |
| s->gptimer[7] = omap_gp_timer_init(omap_l4ta(s->l4, 27), |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_GPTIMER8), |
| omap_findclk(s, "core_gpt8_clk"), |
| omap_findclk(s, "core_l4_iclk")); |
| s->gptimer[8] = omap_gp_timer_init(omap_l4ta(s->l4, 28), |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_GPTIMER9), |
| omap_findclk(s, "core_gpt9_clk"), |
| omap_findclk(s, "core_l4_iclk")); |
| s->gptimer[9] = omap_gp_timer_init(omap_l4ta(s->l4, 29), |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_GPTIMER10), |
| omap_findclk(s, "core_gpt10_clk"), |
| omap_findclk(s, "core_l4_iclk")); |
| s->gptimer[10] = omap_gp_timer_init(omap_l4ta(s->l4, 30), |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_GPTIMER11), |
| omap_findclk(s, "core_gpt11_clk"), |
| omap_findclk(s, "core_l4_iclk")); |
| s->gptimer[11] = omap_gp_timer_init(omap_l4ta(s->l4, 31), |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_GPTIMER12), |
| omap_findclk(s, "core_gpt12_clk"), |
| omap_findclk(s, "core_l4_iclk")); |
| |
| omap_tap_init(omap_l4ta(s->l4, 2), s); |
| |
| s->synctimer = omap_synctimer_init(omap_l4tao(s->l4, 2), s, |
| omap_findclk(s, "clk32-kHz"), |
| omap_findclk(s, "core_l4_iclk")); |
| |
| s->i2c[0] = qdev_create(NULL, "omap_i2c"); |
| qdev_prop_set_uint8(s->i2c[0], "revision", 0x34); |
| qdev_prop_set_ptr(s->i2c[0], "iclk", omap_findclk(s, "i2c1.iclk")); |
| qdev_prop_set_ptr(s->i2c[0], "fclk", omap_findclk(s, "i2c1.fclk")); |
| qdev_init_nofail(s->i2c[0]); |
| busdev = SYS_BUS_DEVICE(s->i2c[0]); |
| sysbus_connect_irq(busdev, 0, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_I2C1_IRQ)); |
| sysbus_connect_irq(busdev, 1, s->drq[OMAP24XX_DMA_I2C1_TX]); |
| sysbus_connect_irq(busdev, 2, s->drq[OMAP24XX_DMA_I2C1_RX]); |
| sysbus_mmio_map(busdev, 0, omap_l4_region_base(omap_l4tao(s->l4, 5), 0)); |
| |
| s->i2c[1] = qdev_create(NULL, "omap_i2c"); |
| qdev_prop_set_uint8(s->i2c[1], "revision", 0x34); |
| qdev_prop_set_ptr(s->i2c[1], "iclk", omap_findclk(s, "i2c2.iclk")); |
| qdev_prop_set_ptr(s->i2c[1], "fclk", omap_findclk(s, "i2c2.fclk")); |
| qdev_init_nofail(s->i2c[1]); |
| busdev = SYS_BUS_DEVICE(s->i2c[1]); |
| sysbus_connect_irq(busdev, 0, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_I2C2_IRQ)); |
| sysbus_connect_irq(busdev, 1, s->drq[OMAP24XX_DMA_I2C2_TX]); |
| sysbus_connect_irq(busdev, 2, s->drq[OMAP24XX_DMA_I2C2_RX]); |
| sysbus_mmio_map(busdev, 0, omap_l4_region_base(omap_l4tao(s->l4, 6), 0)); |
| |
| s->gpio = qdev_create(NULL, "omap2-gpio"); |
| qdev_prop_set_int32(s->gpio, "mpu_model", s->mpu_model); |
| qdev_prop_set_ptr(s->gpio, "iclk", omap_findclk(s, "gpio_iclk")); |
| qdev_prop_set_ptr(s->gpio, "fclk0", omap_findclk(s, "gpio1_dbclk")); |
| qdev_prop_set_ptr(s->gpio, "fclk1", omap_findclk(s, "gpio2_dbclk")); |
| qdev_prop_set_ptr(s->gpio, "fclk2", omap_findclk(s, "gpio3_dbclk")); |
| qdev_prop_set_ptr(s->gpio, "fclk3", omap_findclk(s, "gpio4_dbclk")); |
| if (s->mpu_model == omap2430) { |
| qdev_prop_set_ptr(s->gpio, "fclk4", omap_findclk(s, "gpio5_dbclk")); |
| } |
| qdev_init_nofail(s->gpio); |
| busdev = SYS_BUS_DEVICE(s->gpio); |
| sysbus_connect_irq(busdev, 0, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_GPIO_BANK1)); |
| sysbus_connect_irq(busdev, 3, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_GPIO_BANK2)); |
| sysbus_connect_irq(busdev, 6, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_GPIO_BANK3)); |
| sysbus_connect_irq(busdev, 9, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_GPIO_BANK4)); |
| if (s->mpu_model == omap2430) { |
| sysbus_connect_irq(busdev, 12, |
| qdev_get_gpio_in(s->ih[0], |
| OMAP_INT_243X_GPIO_BANK5)); |
| } |
| ta = omap_l4ta(s->l4, 3); |
| sysbus_mmio_map(busdev, 0, omap_l4_region_base(ta, 1)); |
| sysbus_mmio_map(busdev, 1, omap_l4_region_base(ta, 0)); |
| sysbus_mmio_map(busdev, 2, omap_l4_region_base(ta, 2)); |
| sysbus_mmio_map(busdev, 3, omap_l4_region_base(ta, 4)); |
| sysbus_mmio_map(busdev, 4, omap_l4_region_base(ta, 5)); |
| |
| s->sdrc = omap_sdrc_init(sysmem, 0x68009000); |
| s->gpmc = omap_gpmc_init(s, 0x6800a000, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_GPMC_IRQ), |
| s->drq[OMAP24XX_DMA_GPMC]); |
| |
| dinfo = drive_get(IF_SD, 0, 0); |
| if (!dinfo) { |
| fprintf(stderr, "qemu: missing SecureDigital device\n"); |
| exit(1); |
| } |
| s->mmc = omap2_mmc_init(omap_l4tao(s->l4, 9), |
| blk_by_legacy_dinfo(dinfo), |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_MMC_IRQ), |
| &s->drq[OMAP24XX_DMA_MMC1_TX], |
| omap_findclk(s, "mmc_fclk"), omap_findclk(s, "mmc_iclk")); |
| |
| s->mcspi[0] = omap_mcspi_init(omap_l4ta(s->l4, 35), 4, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_MCSPI1_IRQ), |
| &s->drq[OMAP24XX_DMA_SPI1_TX0], |
| omap_findclk(s, "spi1_fclk"), |
| omap_findclk(s, "spi1_iclk")); |
| s->mcspi[1] = omap_mcspi_init(omap_l4ta(s->l4, 36), 2, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_MCSPI2_IRQ), |
| &s->drq[OMAP24XX_DMA_SPI2_TX0], |
| omap_findclk(s, "spi2_fclk"), |
| omap_findclk(s, "spi2_iclk")); |
| |
| s->dss = omap_dss_init(omap_l4ta(s->l4, 10), sysmem, 0x68000800, |
| /* XXX wire M_IRQ_25, D_L2_IRQ_30 and I_IRQ_13 together */ |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_DSS_IRQ), |
| s->drq[OMAP24XX_DMA_DSS], |
| omap_findclk(s, "dss_clk1"), omap_findclk(s, "dss_clk2"), |
| omap_findclk(s, "dss_54m_clk"), |
| omap_findclk(s, "dss_l3_iclk"), |
| omap_findclk(s, "dss_l4_iclk")); |
| |
| omap_sti_init(omap_l4ta(s->l4, 18), sysmem, 0x54000000, |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_STI), |
| omap_findclk(s, "emul_ck"), |
| serial_hds[0] && serial_hds[1] && serial_hds[2] ? |
| serial_hds[3] : NULL); |
| |
| s->eac = omap_eac_init(omap_l4ta(s->l4, 32), |
| qdev_get_gpio_in(s->ih[0], OMAP_INT_24XX_EAC_IRQ), |
| /* Ten consecutive lines */ |
| &s->drq[OMAP24XX_DMA_EAC_AC_RD], |
| omap_findclk(s, "func_96m_clk"), |
| omap_findclk(s, "core_l4_iclk")); |
| |
| /* All register mappings (includin those not currenlty implemented): |
| * SystemControlMod 48000000 - 48000fff |
| * SystemControlL4 48001000 - 48001fff |
| * 32kHz Timer Mod 48004000 - 48004fff |
| * 32kHz Timer L4 48005000 - 48005fff |
| * PRCM ModA 48008000 - 480087ff |
| * PRCM ModB 48008800 - 48008fff |
| * PRCM L4 48009000 - 48009fff |
| * TEST-BCM Mod 48012000 - 48012fff |
| * TEST-BCM L4 48013000 - 48013fff |
| * TEST-TAP Mod 48014000 - 48014fff |
| * TEST-TAP L4 48015000 - 48015fff |
| * GPIO1 Mod 48018000 - 48018fff |
| * GPIO Top 48019000 - 48019fff |
| * GPIO2 Mod 4801a000 - 4801afff |
| * GPIO L4 4801b000 - 4801bfff |
| * GPIO3 Mod 4801c000 - 4801cfff |
| * GPIO4 Mod 4801e000 - 4801efff |
| * WDTIMER1 Mod 48020000 - 48010fff |
| * WDTIMER Top 48021000 - 48011fff |
| * WDTIMER2 Mod 48022000 - 48012fff |
| * WDTIMER L4 48023000 - 48013fff |
| * WDTIMER3 Mod 48024000 - 48014fff |
| * WDTIMER3 L4 48025000 - 48015fff |
| * WDTIMER4 Mod 48026000 - 48016fff |
| * WDTIMER4 L4 48027000 - 48017fff |
| * GPTIMER1 Mod 48028000 - 48018fff |
| * GPTIMER1 L4 48029000 - 48019fff |
| * GPTIMER2 Mod 4802a000 - 4801afff |
| * GPTIMER2 L4 4802b000 - 4801bfff |
| * L4-Config AP 48040000 - 480407ff |
| * L4-Config IP 48040800 - 48040fff |
| * L4-Config LA 48041000 - 48041fff |
| * ARM11ETB Mod 48048000 - 48049fff |
| * ARM11ETB L4 4804a000 - 4804afff |
| * DISPLAY Top 48050000 - 480503ff |
| * DISPLAY DISPC 48050400 - 480507ff |
| * DISPLAY RFBI 48050800 - 48050bff |
| * DISPLAY VENC 48050c00 - 48050fff |
| * DISPLAY L4 48051000 - 48051fff |
| * CAMERA Top 48052000 - 480523ff |
| * CAMERA core 48052400 - 480527ff |
| * CAMERA DMA 48052800 - 48052bff |
| * CAMERA MMU 48052c00 - 48052fff |
| * CAMERA L4 48053000 - 48053fff |
| * SDMA Mod 48056000 - 48056fff |
| * SDMA L4 48057000 - 48057fff |
| * SSI Top 48058000 - 48058fff |
| * SSI GDD 48059000 - 48059fff |
| * SSI Port1 4805a000 - 4805afff |
| * SSI Port2 4805b000 - 4805bfff |
| * SSI L4 4805c000 - 4805cfff |
| * USB Mod 4805e000 - 480fefff |
| * USB L4 4805f000 - 480fffff |
| * WIN_TRACER1 Mod 48060000 - 48060fff |
| * WIN_TRACER1 L4 48061000 - 48061fff |
| * WIN_TRACER2 Mod 48062000 - 48062fff |
| * WIN_TRACER2 L4 48063000 - 48063fff |
| * WIN_TRACER3 Mod 48064000 - 48064fff |
| * WIN_TRACER3 L4 48065000 - 48065fff |
| * WIN_TRACER4 Top 48066000 - 480660ff |
| * WIN_TRACER4 ETT 48066100 - 480661ff |
| * WIN_TRACER4 WT 48066200 - 480662ff |
| * WIN_TRACER4 L4 48067000 - 48067fff |
| * XTI Mod 48068000 - 48068fff |
| * XTI L4 48069000 - 48069fff |
| * UART1 Mod 4806a000 - 4806afff |
| * UART1 L4 4806b000 - 4806bfff |
| * UART2 Mod 4806c000 - 4806cfff |
| * UART2 L4 4806d000 - 4806dfff |
| * UART3 Mod 4806e000 - 4806efff |
| * UART3 L4 4806f000 - 4806ffff |
| * I2C1 Mod 48070000 - 48070fff |
| * I2C1 L4 48071000 - 48071fff |
| * I2C2 Mod 48072000 - 48072fff |
| * I2C2 L4 48073000 - 48073fff |
| * McBSP1 Mod 48074000 - 48074fff |
| * McBSP1 L4 48075000 - 48075fff |
| * McBSP2 Mod 48076000 - 48076fff |
| * McBSP2 L4 48077000 - 48077fff |
| * GPTIMER3 Mod 48078000 - 48078fff |
| * GPTIMER3 L4 48079000 - 48079fff |
| * GPTIMER4 Mod 4807a000 - 4807afff |
| * GPTIMER4 L4 4807b000 - 4807bfff |
| * GPTIMER5 Mod 4807c000 - 4807cfff |
| * GPTIMER5 L4 4807d000 - 4807dfff |
| * GPTIMER6 Mod 4807e000 - 4807efff |
| * GPTIMER6 L4 4807f000 - 4807ffff |
| * GPTIMER7 Mod 48080000 - 48080fff |
| * GPTIMER7 L4 48081000 - 48081fff |
| * GPTIMER8 Mod 48082000 - 48082fff |
| * GPTIMER8 L4 48083000 - 48083fff |
| * GPTIMER9 Mod 48084000 - 48084fff |
| * GPTIMER9 L4 48085000 - 48085fff |
| * GPTIMER10 Mod 48086000 - 48086fff |
| * GPTIMER10 L4 48087000 - 48087fff |
| * GPTIMER11 Mod 48088000 - 48088fff |
| * GPTIMER11 L4 48089000 - 48089fff |
| * GPTIMER12 Mod 4808a000 - 4808afff |
| * GPTIMER12 L4 4808b000 - 4808bfff |
| * EAC Mod 48090000 - 48090fff |
| * EAC L4 48091000 - 48091fff |
| * FAC Mod 48092000 - 48092fff |
| * FAC L4 48093000 - 48093fff |
| * MAILBOX Mod 48094000 - 48094fff |
| * MAILBOX L4 48095000 - 48095fff |
| * SPI1 Mod 48098000 - 48098fff |
| * SPI1 L4 48099000 - 48099fff |
| * SPI2 Mod 4809a000 - 4809afff |
| * SPI2 L4 4809b000 - 4809bfff |
| * MMC/SDIO Mod 4809c000 - 4809cfff |
| * MMC/SDIO L4 4809d000 - 4809dfff |
| * MS_PRO Mod 4809e000 - 4809efff |
| * MS_PRO L4 4809f000 - 4809ffff |
| * RNG Mod 480a0000 - 480a0fff |
| * RNG L4 480a1000 - 480a1fff |
| * DES3DES Mod 480a2000 - 480a2fff |
| * DES3DES L4 480a3000 - 480a3fff |
| * SHA1MD5 Mod 480a4000 - 480a4fff |
| * SHA1MD5 L4 480a5000 - 480a5fff |
| * AES Mod 480a6000 - 480a6fff |
| * AES L4 480a7000 - 480a7fff |
| * PKA Mod 480a8000 - 480a9fff |
| * PKA L4 480aa000 - 480aafff |
| * MG Mod 480b0000 - 480b0fff |
| * MG L4 480b1000 - 480b1fff |
| * HDQ/1-wire Mod 480b2000 - 480b2fff |
| * HDQ/1-wire L4 480b3000 - 480b3fff |
| * MPU interrupt 480fe000 - 480fefff |
| * STI channel base 54000000 - 5400ffff |
| * IVA RAM 5c000000 - 5c01ffff |
| * IVA ROM 5c020000 - 5c027fff |
| * IMG_BUF_A 5c040000 - 5c040fff |
| * IMG_BUF_B 5c042000 - 5c042fff |
| * VLCDS 5c048000 - 5c0487ff |
| * IMX_COEF 5c049000 - 5c04afff |
| * IMX_CMD 5c051000 - 5c051fff |
| * VLCDQ 5c053000 - 5c0533ff |
| * VLCDH 5c054000 - 5c054fff |
| * SEQ_CMD 5c055000 - 5c055fff |
| * IMX_REG 5c056000 - 5c0560ff |
| * VLCD_REG 5c056100 - 5c0561ff |
| * SEQ_REG 5c056200 - 5c0562ff |
| * IMG_BUF_REG 5c056300 - 5c0563ff |
| * SEQIRQ_REG 5c056400 - 5c0564ff |
| * OCP_REG 5c060000 - 5c060fff |
| * SYSC_REG 5c070000 - 5c070fff |
| * MMU_REG 5d000000 - 5d000fff |
| * sDMA R 68000400 - 680005ff |
| * sDMA W 68000600 - 680007ff |
| * Display Control 68000800 - 680009ff |
| * DSP subsystem 68000a00 - 68000bff |
| * MPU subsystem 68000c00 - 68000dff |
| * IVA subsystem 68001000 - 680011ff |
| * USB 68001200 - 680013ff |
| * Camera 68001400 - 680015ff |
| * VLYNQ (firewall) 68001800 - 68001bff |
| * VLYNQ 68001e00 - 68001fff |
| * SSI 68002000 - 680021ff |
| * L4 68002400 - 680025ff |
| * DSP (firewall) 68002800 - 68002bff |
| * DSP subsystem 68002e00 - 68002fff |
| * IVA (firewall) 68003000 - 680033ff |
| * IVA 68003600 - 680037ff |
| * GFX 68003a00 - 68003bff |
| * CMDWR emulation 68003c00 - 68003dff |
| * SMS 68004000 - 680041ff |
| * OCM 68004200 - 680043ff |
| * GPMC 68004400 - 680045ff |
| * RAM (firewall) 68005000 - 680053ff |
| * RAM (err login) 68005400 - 680057ff |
| * ROM (firewall) 68005800 - 68005bff |
| * ROM (err login) 68005c00 - 68005fff |
| * GPMC (firewall) 68006000 - 680063ff |
| * GPMC (err login) 68006400 - 680067ff |
| * SMS (err login) 68006c00 - 68006fff |
| * SMS registers 68008000 - 68008fff |
| * SDRC registers 68009000 - 68009fff |
| * GPMC registers 6800a000 6800afff |
| */ |
| |
| qemu_register_reset(omap2_mpu_reset, s); |
| |
| return s; |
| } |