| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright 2017-2021 Joel Stanley <joel@jms.id.au>, IBM Corporation |
| * |
| * Infineon DPS310 temperature and humidity sensor |
| * |
| * https://www.infineon.com/cms/en/product/sensor/pressure-sensors/pressure-sensors-for-iot/dps310/ |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/log.h" |
| #include "hw/i2c/i2c.h" |
| #include "qapi/error.h" |
| #include "qapi/visitor.h" |
| #include "migration/vmstate.h" |
| |
| #define NUM_REGISTERS 0x33 |
| |
| typedef struct DPS310State { |
| /*< private >*/ |
| I2CSlave i2c; |
| |
| /*< public >*/ |
| uint8_t regs[NUM_REGISTERS]; |
| |
| uint8_t len; |
| uint8_t pointer; |
| |
| } DPS310State; |
| |
| #define TYPE_DPS310 "dps310" |
| #define DPS310(obj) OBJECT_CHECK(DPS310State, (obj), TYPE_DPS310) |
| |
| #define DPS310_PRS_B2 0x00 |
| #define DPS310_PRS_B1 0x01 |
| #define DPS310_PRS_B0 0x02 |
| #define DPS310_TMP_B2 0x03 |
| #define DPS310_TMP_B1 0x04 |
| #define DPS310_TMP_B0 0x05 |
| #define DPS310_PRS_CFG 0x06 |
| #define DPS310_TMP_CFG 0x07 |
| #define DPS310_TMP_RATE_BITS (0x70) |
| #define DPS310_MEAS_CFG 0x08 |
| #define DPS310_MEAS_CTRL_BITS (0x07) |
| #define DPS310_PRESSURE_EN BIT(0) |
| #define DPS310_TEMP_EN BIT(1) |
| #define DPS310_BACKGROUND BIT(2) |
| #define DPS310_PRS_RDY BIT(4) |
| #define DPS310_TMP_RDY BIT(5) |
| #define DPS310_SENSOR_RDY BIT(6) |
| #define DPS310_COEF_RDY BIT(7) |
| #define DPS310_CFG_REG 0x09 |
| #define DPS310_RESET 0x0c |
| #define DPS310_RESET_MAGIC (BIT(0) | BIT(3)) |
| #define DPS310_COEF_BASE 0x10 |
| #define DPS310_COEF_LAST 0x21 |
| #define DPS310_COEF_SRC 0x28 |
| |
| static void dps310_reset(DeviceState *dev) |
| { |
| DPS310State *s = DPS310(dev); |
| |
| static const uint8_t regs_reset_state[sizeof(s->regs)] = { |
| 0xfe, 0x2f, 0xee, 0x02, 0x69, 0xa6, 0x00, 0x80, 0xc7, 0x00, 0x00, 0x00, |
| 0x00, 0x10, 0x00, 0x00, 0x0e, 0x1e, 0xdd, 0x13, 0xca, 0x5f, 0x21, 0x52, |
| 0xf9, 0xc6, 0x04, 0xd1, 0xdb, 0x47, 0x00, 0x5b, 0xfb, 0x3a, 0x00, 0x00, |
| 0x20, 0x49, 0x4e, 0xa5, 0x90, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x60, 0x15, 0x02 |
| }; |
| |
| memcpy(s->regs, regs_reset_state, sizeof(s->regs)); |
| s->pointer = 0; |
| |
| /* TODO: assert these after some timeout ? */ |
| s->regs[DPS310_MEAS_CFG] = DPS310_COEF_RDY | DPS310_SENSOR_RDY |
| | DPS310_TMP_RDY | DPS310_PRS_RDY; |
| } |
| |
| static uint8_t dps310_read(DPS310State *s, uint8_t reg) |
| { |
| if (reg >= sizeof(s->regs)) { |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: register 0x%02x out of bounds\n", |
| __func__, s->pointer); |
| return 0xFF; |
| } |
| |
| switch (reg) { |
| case DPS310_PRS_B2: |
| case DPS310_PRS_B1: |
| case DPS310_PRS_B0: |
| case DPS310_TMP_B2: |
| case DPS310_TMP_B1: |
| case DPS310_TMP_B0: |
| case DPS310_PRS_CFG: |
| case DPS310_TMP_CFG: |
| case DPS310_MEAS_CFG: |
| case DPS310_CFG_REG: |
| case DPS310_COEF_BASE...DPS310_COEF_LAST: |
| case DPS310_COEF_SRC: |
| case 0x32: /* Undocumented register to indicate workaround not required */ |
| return s->regs[reg]; |
| default: |
| qemu_log_mask(LOG_UNIMP, "%s: register 0x%02x unimplemented\n", |
| __func__, reg); |
| return 0xFF; |
| } |
| } |
| |
| static void dps310_write(DPS310State *s, uint8_t reg, uint8_t data) |
| { |
| if (reg >= sizeof(s->regs)) { |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: register %d out of bounds\n", |
| __func__, s->pointer); |
| return; |
| } |
| |
| switch (reg) { |
| case DPS310_RESET: |
| if (data == DPS310_RESET_MAGIC) { |
| device_cold_reset(DEVICE(s)); |
| } |
| break; |
| case DPS310_PRS_CFG: |
| case DPS310_TMP_CFG: |
| case DPS310_MEAS_CFG: |
| case DPS310_CFG_REG: |
| s->regs[reg] = data; |
| break; |
| default: |
| qemu_log_mask(LOG_UNIMP, "%s: register 0x%02x unimplemented\n", |
| __func__, reg); |
| return; |
| } |
| } |
| |
| static uint8_t dps310_rx(I2CSlave *i2c) |
| { |
| DPS310State *s = DPS310(i2c); |
| |
| if (s->len == 1) { |
| return dps310_read(s, s->pointer++); |
| } else { |
| return 0xFF; |
| } |
| } |
| |
| static int dps310_tx(I2CSlave *i2c, uint8_t data) |
| { |
| DPS310State *s = DPS310(i2c); |
| |
| if (s->len == 0) { |
| /* |
| * first byte is the register pointer for a read or write |
| * operation |
| */ |
| s->pointer = data; |
| s->len++; |
| } else if (s->len == 1) { |
| dps310_write(s, s->pointer++, data); |
| } |
| |
| return 0; |
| } |
| |
| static int dps310_event(I2CSlave *i2c, enum i2c_event event) |
| { |
| DPS310State *s = DPS310(i2c); |
| |
| switch (event) { |
| case I2C_START_SEND: |
| s->pointer = 0xFF; |
| s->len = 0; |
| break; |
| case I2C_START_RECV: |
| if (s->len != 1) { |
| qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid recv sequence\n", |
| __func__); |
| } |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static const VMStateDescription vmstate_dps310 = { |
| .name = "DPS310", |
| .version_id = 0, |
| .minimum_version_id = 0, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT8(len, DPS310State), |
| VMSTATE_UINT8_ARRAY(regs, DPS310State, NUM_REGISTERS), |
| VMSTATE_UINT8(pointer, DPS310State), |
| VMSTATE_I2C_SLAVE(i2c, DPS310State), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void dps310_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); |
| |
| k->event = dps310_event; |
| k->recv = dps310_rx; |
| k->send = dps310_tx; |
| dc->reset = dps310_reset; |
| dc->vmsd = &vmstate_dps310; |
| } |
| |
| static const TypeInfo dps310_info = { |
| .name = TYPE_DPS310, |
| .parent = TYPE_I2C_SLAVE, |
| .instance_size = sizeof(DPS310State), |
| .class_init = dps310_class_init, |
| }; |
| |
| static void dps310_register_types(void) |
| { |
| type_register_static(&dps310_info); |
| } |
| |
| type_init(dps310_register_types) |