include/hw/pci/pci_bridge.h - qemu - Git at Google

 /*
  * QEMU PCI bridge
  *
  * Copyright (c) 2004 Fabrice Bellard
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  *
  * split out pci bus specific stuff from pci.[hc] to pci_bridge.[hc]
  * Copyright (c) 2009 Isaku Yamahata <yamahata at valinux co jp>
  *                    VA Linux Systems Japan K.K.
  *
  */

 #ifndef QEMU_PCI_BRIDGE_H
 #define QEMU_PCI_BRIDGE_H

 #include "hw/pci/pci_device.h"
 #include "hw/pci/pci_bus.h"
 #include "hw/cxl/cxl.h"
 #include "qom/object.h"

 typedef struct PCIBridgeWindows PCIBridgeWindows;

 /*
  * Aliases for each of the address space windows that the bridge
  * can forward. Mapped into the bridge's parent's address space,
  * as subregions.
  */
 struct PCIBridgeWindows {
     MemoryRegion alias_pref_mem;
     MemoryRegion alias_mem;
     MemoryRegion alias_io;
     /*
      * When bridge control VGA forwarding is enabled, bridges will
      * provide positive decode on the PCI VGA defined I/O port and
      * MMIO ranges.  When enabled forwarding is only qualified on the
      * I/O and memory enable bits in the bridge command register.
      */
     MemoryRegion alias_vga[QEMU_PCI_VGA_NUM_REGIONS];
 };

 #define TYPE_PCI_BRIDGE "base-pci-bridge"
 OBJECT_DECLARE_SIMPLE_TYPE(PCIBridge, PCI_BRIDGE)
 #define IS_PCI_BRIDGE(dev) object_dynamic_cast(OBJECT(dev), TYPE_PCI_BRIDGE)

 struct PCIBridge {
     /*< private >*/
     PCIDevice parent_obj;
     /*< public >*/

     /* private member */
     PCIBus sec_bus;
     /*
      * Memory regions for the bridge's address spaces.  These regions are not
      * directly added to system_memory/system_io or its descendants.
      * Bridge's secondary bus points to these, so that devices
      * under the bridge see these regions as its address spaces.
      * The regions are as large as the entire address space -
      * they don't take into account any windows.
      */
     MemoryRegion address_space_mem;
     MemoryRegion address_space_io;

     PCIBridgeWindows windows;

     pci_map_irq_fn map_irq;
     const char *bus_name;

     /* SLT is RO for PCIE to PCIE bridges, but old QEMU versions had it RW */
     bool pcie_writeable_slt_bug;
 };

 #define PCI_BRIDGE_DEV_PROP_CHASSIS_NR "chassis_nr"
 #define PCI_BRIDGE_DEV_PROP_MSI        "msi"
 #define PCI_BRIDGE_DEV_PROP_SHPC       "shpc"
 typedef struct CXLHost CXLHost;

 typedef struct PXBDev {
     /*< private >*/
     PCIDevice parent_obj;
     /*< public >*/

     uint8_t bus_nr;
     uint16_t numa_node;
     bool bypass_iommu;
 } PXBDev;

 typedef struct PXBPCIEDev {
     /*< private >*/
     PXBDev parent_obj;
 } PXBPCIEDev;

 #define TYPE_PXB_CXL_BUS "pxb-cxl-bus"
 #define TYPE_PXB_DEV "pxb"
 OBJECT_DECLARE_SIMPLE_TYPE(PXBDev, PXB_DEV)

 typedef struct PXBCXLDev {
     /*< private >*/
     PXBPCIEDev parent_obj;
     /*< public >*/

     bool hdm_for_passthrough;
     CXLHost *cxl_host_bridge; /* Pointer to a CXLHost */
 } PXBCXLDev;

 #define TYPE_PXB_CXL_DEV "pxb-cxl"
 OBJECT_DECLARE_SIMPLE_TYPE(PXBCXLDev, PXB_CXL_DEV)

 int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset,
                           uint16_t svid, uint16_t ssid,
                           Error **errp);

 PCIDevice *pci_bridge_get_device(PCIBus *bus);
 PCIBus *pci_bridge_get_sec_bus(PCIBridge *br);

 pcibus_t pci_bridge_get_base(const PCIDevice *bridge, uint8_t type);
 pcibus_t pci_bridge_get_limit(const PCIDevice *bridge, uint8_t type);

 void pci_bridge_update_mappings(PCIBridge *br);
 void pci_bridge_write_config(PCIDevice *d,
                              uint32_t address, uint32_t val, int len);
 void pci_bridge_disable_base_limit(PCIDevice *dev);
 void pci_bridge_reset(DeviceState *qdev);

 void pci_bridge_initfn(PCIDevice *pci_dev, const char *typename);
 void pci_bridge_exitfn(PCIDevice *pci_dev);

 void pci_bridge_dev_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
                             Error **errp);
 void pci_bridge_dev_unplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
                               Error **errp);
 void pci_bridge_dev_unplug_request_cb(HotplugHandler *hotplug_dev,
                                       DeviceState *dev, Error **errp);

 /*
  * before qdev initialization(qdev_init()), this function sets bus_name and
  * map_irq callback which are necessary for pci_bridge_initfn() to
  * initialize bus.
  */
 void pci_bridge_map_irq(PCIBridge *br, const char* bus_name,
                         pci_map_irq_fn map_irq);

 /* TODO: add this define to pci_regs.h in linux and then in qemu. */
 #define  PCI_BRIDGE_CTL_VGA_16BIT       0x10    /* VGA 16-bit decode */
 #define  PCI_BRIDGE_CTL_DISCARD         0x100   /* Primary discard timer */
 #define  PCI_BRIDGE_CTL_SEC_DISCARD     0x200   /* Secondary discard timer */
 #define  PCI_BRIDGE_CTL_DISCARD_STATUS  0x400   /* Discard timer status */
 #define  PCI_BRIDGE_CTL_DISCARD_SERR    0x800   /* Discard timer SERR# enable */

 typedef struct PCIBridgeQemuCap {
     uint8_t id;     /* Standard PCI capability header field */
     uint8_t next;   /* Standard PCI capability header field */
     uint8_t len;    /* Standard PCI vendor-specific capability header field */
     uint8_t type;   /* Red Hat vendor-specific capability type.
                        Types are defined with REDHAT_PCI_CAP_ prefix */

     uint32_t bus_res;   /* Minimum number of buses to reserve */
     uint64_t io;        /* IO space to reserve */
     uint32_t mem;       /* Non-prefetchable memory to reserve */
     /* At most one of the following two fields may be set to a value
      * different from -1 */
     uint32_t mem_pref_32; /* Prefetchable memory to reserve (32-bit MMIO) */
     uint64_t mem_pref_64; /* Prefetchable memory to reserve (64-bit MMIO) */
 } PCIBridgeQemuCap;

 #define REDHAT_PCI_CAP_TYPE_OFFSET      3
 #define REDHAT_PCI_CAP_RESOURCE_RESERVE 1

 /*
  * PCI BUS/IO/MEM/PREFMEM additional resources recorded as a
  * capability in PCI configuration space to reserve on firmware init.
  */
 typedef struct PCIResReserve {
     uint32_t bus;
     uint64_t io;
     uint64_t mem_non_pref;
     uint64_t mem_pref_32;
     uint64_t mem_pref_64;
 } PCIResReserve;

 #define REDHAT_PCI_CAP_RES_RESERVE_BUS_RES     4
 #define REDHAT_PCI_CAP_RES_RESERVE_IO          8
 #define REDHAT_PCI_CAP_RES_RESERVE_MEM         16
 #define REDHAT_PCI_CAP_RES_RESERVE_PREF_MEM_32 20
 #define REDHAT_PCI_CAP_RES_RESERVE_PREF_MEM_64 24
 #define REDHAT_PCI_CAP_RES_RESERVE_CAP_SIZE    32

 int pci_bridge_qemu_reserve_cap_init(PCIDevice *dev, int cap_offset,
                                PCIResReserve res_reserve, Error **errp);

 #endif /* QEMU_PCI_BRIDGE_H */
	/*
	* QEMU PCI bridge
	*
	* Copyright (c) 2004 Fabrice Bellard
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
	*
	* split out pci bus specific stuff from pci.[hc] to pci_bridge.[hc]
	* Copyright (c) 2009 Isaku Yamahata <yamahata at valinux co jp>
	* VA Linux Systems Japan K.K.
	*
	*/

	#ifndef QEMU_PCI_BRIDGE_H
	#define QEMU_PCI_BRIDGE_H

	#include "hw/pci/pci_device.h"
	#include "hw/pci/pci_bus.h"
	#include "hw/cxl/cxl.h"
	#include "qom/object.h"

	typedef struct PCIBridgeWindows PCIBridgeWindows;

	/*
	* Aliases for each of the address space windows that the bridge
	* can forward. Mapped into the bridge's parent's address space,
	* as subregions.
	*/
	struct PCIBridgeWindows {
	MemoryRegion alias_pref_mem;
	MemoryRegion alias_mem;
	MemoryRegion alias_io;
	/*
	* When bridge control VGA forwarding is enabled, bridges will
	* provide positive decode on the PCI VGA defined I/O port and
	* MMIO ranges. When enabled forwarding is only qualified on the
	* I/O and memory enable bits in the bridge command register.
	*/
	MemoryRegion alias_vga[QEMU_PCI_VGA_NUM_REGIONS];
	};

	#define TYPE_PCI_BRIDGE "base-pci-bridge"
	OBJECT_DECLARE_SIMPLE_TYPE(PCIBridge, PCI_BRIDGE)
	#define IS_PCI_BRIDGE(dev) object_dynamic_cast(OBJECT(dev), TYPE_PCI_BRIDGE)

	struct PCIBridge {
	/< private >/
	PCIDevice parent_obj;
	/< public >/

	/* private member */
	PCIBus sec_bus;
	/*
	* Memory regions for the bridge's address spaces. These regions are not
	* directly added to system_memory/system_io or its descendants.
	* Bridge's secondary bus points to these, so that devices
	* under the bridge see these regions as its address spaces.
	* The regions are as large as the entire address space -
	* they don't take into account any windows.
	*/
	MemoryRegion address_space_mem;
	MemoryRegion address_space_io;

	PCIBridgeWindows windows;

	pci_map_irq_fn map_irq;
	const char *bus_name;

	/* SLT is RO for PCIE to PCIE bridges, but old QEMU versions had it RW */
	bool pcie_writeable_slt_bug;
	};

	#define PCI_BRIDGE_DEV_PROP_CHASSIS_NR "chassis_nr"
	#define PCI_BRIDGE_DEV_PROP_MSI "msi"
	#define PCI_BRIDGE_DEV_PROP_SHPC "shpc"
	typedef struct CXLHost CXLHost;

	typedef struct PXBDev {
	/< private >/
	PCIDevice parent_obj;
	/< public >/

	uint8_t bus_nr;
	uint16_t numa_node;
	bool bypass_iommu;
	} PXBDev;

	typedef struct PXBPCIEDev {
	/< private >/
	PXBDev parent_obj;
	} PXBPCIEDev;

	#define TYPE_PXB_CXL_BUS "pxb-cxl-bus"
	#define TYPE_PXB_DEV "pxb"
	OBJECT_DECLARE_SIMPLE_TYPE(PXBDev, PXB_DEV)

	typedef struct PXBCXLDev {
	/< private >/
	PXBPCIEDev parent_obj;
	/< public >/

	bool hdm_for_passthrough;
	CXLHost cxl_host_bridge; / Pointer to a CXLHost */
	} PXBCXLDev;

	#define TYPE_PXB_CXL_DEV "pxb-cxl"
	OBJECT_DECLARE_SIMPLE_TYPE(PXBCXLDev, PXB_CXL_DEV)

	int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset,
	uint16_t svid, uint16_t ssid,
	Error **errp);

	PCIDevice pci_bridge_get_device(PCIBus bus);
	PCIBus pci_bridge_get_sec_bus(PCIBridge br);

	pcibus_t pci_bridge_get_base(const PCIDevice *bridge, uint8_t type);
	pcibus_t pci_bridge_get_limit(const PCIDevice *bridge, uint8_t type);

	void pci_bridge_update_mappings(PCIBridge *br);
	void pci_bridge_write_config(PCIDevice *d,
	uint32_t address, uint32_t val, int len);
	void pci_bridge_disable_base_limit(PCIDevice *dev);
	void pci_bridge_reset(DeviceState *qdev);

	void pci_bridge_initfn(PCIDevice pci_dev, const char typename);
	void pci_bridge_exitfn(PCIDevice *pci_dev);

	void pci_bridge_dev_plug_cb(HotplugHandler hotplug_dev, DeviceState dev,
	Error **errp);
	void pci_bridge_dev_unplug_cb(HotplugHandler hotplug_dev, DeviceState dev,
	Error **errp);
	void pci_bridge_dev_unplug_request_cb(HotplugHandler *hotplug_dev,
	DeviceState dev, Error *errp);

	/*
	* before qdev initialization(qdev_init()), this function sets bus_name and
	* map_irq callback which are necessary for pci_bridge_initfn() to
	* initialize bus.
	*/
	void pci_bridge_map_irq(PCIBridge br, const char bus_name,
	pci_map_irq_fn map_irq);

	/* TODO: add this define to pci_regs.h in linux and then in qemu. */
	#define PCI_BRIDGE_CTL_VGA_16BIT 0x10 /* VGA 16-bit decode */
	#define PCI_BRIDGE_CTL_DISCARD 0x100 /* Primary discard timer */
	#define PCI_BRIDGE_CTL_SEC_DISCARD 0x200 /* Secondary discard timer */
	#define PCI_BRIDGE_CTL_DISCARD_STATUS 0x400 /* Discard timer status */
	#define PCI_BRIDGE_CTL_DISCARD_SERR 0x800 /* Discard timer SERR# enable */

	typedef struct PCIBridgeQemuCap {
	uint8_t id; /* Standard PCI capability header field */
	uint8_t next; /* Standard PCI capability header field */
	uint8_t len; /* Standard PCI vendor-specific capability header field */
	uint8_t type; /* Red Hat vendor-specific capability type.
	Types are defined with REDHAT_PCI_CAP_ prefix */

	uint32_t bus_res; /* Minimum number of buses to reserve */
	uint64_t io; /* IO space to reserve */
	uint32_t mem; /* Non-prefetchable memory to reserve */
	/* At most one of the following two fields may be set to a value
	* different from -1 */
	uint32_t mem_pref_32; /* Prefetchable memory to reserve (32-bit MMIO) */
	uint64_t mem_pref_64; /* Prefetchable memory to reserve (64-bit MMIO) */
	} PCIBridgeQemuCap;

	#define REDHAT_PCI_CAP_TYPE_OFFSET 3
	#define REDHAT_PCI_CAP_RESOURCE_RESERVE 1

	/*
	* PCI BUS/IO/MEM/PREFMEM additional resources recorded as a
	* capability in PCI configuration space to reserve on firmware init.
	*/
	typedef struct PCIResReserve {
	uint32_t bus;
	uint64_t io;
	uint64_t mem_non_pref;
	uint64_t mem_pref_32;
	uint64_t mem_pref_64;
	} PCIResReserve;

	#define REDHAT_PCI_CAP_RES_RESERVE_BUS_RES 4
	#define REDHAT_PCI_CAP_RES_RESERVE_IO 8
	#define REDHAT_PCI_CAP_RES_RESERVE_MEM 16
	#define REDHAT_PCI_CAP_RES_RESERVE_PREF_MEM_32 20
	#define REDHAT_PCI_CAP_RES_RESERVE_PREF_MEM_64 24
	#define REDHAT_PCI_CAP_RES_RESERVE_CAP_SIZE 32

	int pci_bridge_qemu_reserve_cap_init(PCIDevice *dev, int cap_offset,
	PCIResReserve res_reserve, Error **errp);

	#endif /* QEMU_PCI_BRIDGE_H */