| /* |
| * Copyright (c) 2011, Max Filippov, Open Source and Linux Lab. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of the Open Source and Linux Lab nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/log.h" |
| #include "cpu.h" |
| #include "exec/exec-all.h" |
| #include "exec/gdbstub.h" |
| #include "exec/helper-proto.h" |
| #include "qemu/error-report.h" |
| #include "qemu/qemu-print.h" |
| #include "qemu/host-utils.h" |
| |
| static struct XtensaConfigList *xtensa_cores; |
| |
| static void add_translator_to_hash(GHashTable *translator, |
| const char *name, |
| const XtensaOpcodeOps *opcode) |
| { |
| if (!g_hash_table_insert(translator, (void *)name, (void *)opcode)) { |
| error_report("Multiple definitions of '%s' opcode in a single table", |
| name); |
| } |
| } |
| |
| static GHashTable *hash_opcode_translators(const XtensaOpcodeTranslators *t) |
| { |
| unsigned i, j; |
| GHashTable *translator = g_hash_table_new(g_str_hash, g_str_equal); |
| |
| for (i = 0; i < t->num_opcodes; ++i) { |
| if (t->opcode[i].op_flags & XTENSA_OP_NAME_ARRAY) { |
| const char * const *name = t->opcode[i].name; |
| |
| for (j = 0; name[j]; ++j) { |
| add_translator_to_hash(translator, |
| (void *)name[j], |
| (void *)(t->opcode + i)); |
| } |
| } else { |
| add_translator_to_hash(translator, |
| (void *)t->opcode[i].name, |
| (void *)(t->opcode + i)); |
| } |
| } |
| return translator; |
| } |
| |
| static XtensaOpcodeOps * |
| xtensa_find_opcode_ops(const XtensaOpcodeTranslators *t, |
| const char *name) |
| { |
| static GHashTable *translators; |
| GHashTable *translator; |
| |
| if (translators == NULL) { |
| translators = g_hash_table_new(g_direct_hash, g_direct_equal); |
| } |
| translator = g_hash_table_lookup(translators, t); |
| if (translator == NULL) { |
| translator = hash_opcode_translators(t); |
| g_hash_table_insert(translators, (void *)t, translator); |
| } |
| return g_hash_table_lookup(translator, name); |
| } |
| |
| static void init_libisa(XtensaConfig *config) |
| { |
| unsigned i, j; |
| unsigned opcodes; |
| unsigned formats; |
| unsigned regfiles; |
| |
| config->isa = xtensa_isa_init(config->isa_internal, NULL, NULL); |
| assert(xtensa_isa_maxlength(config->isa) <= MAX_INSN_LENGTH); |
| assert(xtensa_insnbuf_size(config->isa) <= MAX_INSNBUF_LENGTH); |
| opcodes = xtensa_isa_num_opcodes(config->isa); |
| formats = xtensa_isa_num_formats(config->isa); |
| regfiles = xtensa_isa_num_regfiles(config->isa); |
| config->opcode_ops = g_new(XtensaOpcodeOps *, opcodes); |
| |
| for (i = 0; i < formats; ++i) { |
| assert(xtensa_format_num_slots(config->isa, i) <= MAX_INSN_SLOTS); |
| } |
| |
| for (i = 0; i < opcodes; ++i) { |
| const char *opc_name = xtensa_opcode_name(config->isa, i); |
| XtensaOpcodeOps *ops = NULL; |
| |
| assert(xtensa_opcode_num_operands(config->isa, i) <= MAX_OPCODE_ARGS); |
| if (!config->opcode_translators) { |
| ops = xtensa_find_opcode_ops(&xtensa_core_opcodes, opc_name); |
| } else { |
| for (j = 0; !ops && config->opcode_translators[j]; ++j) { |
| ops = xtensa_find_opcode_ops(config->opcode_translators[j], |
| opc_name); |
| } |
| } |
| #ifdef DEBUG |
| if (ops == NULL) { |
| fprintf(stderr, |
| "opcode translator not found for %s's opcode '%s'\n", |
| config->name, opc_name); |
| } |
| #endif |
| config->opcode_ops[i] = ops; |
| } |
| config->a_regfile = xtensa_regfile_lookup(config->isa, "AR"); |
| |
| config->regfile = g_new(void **, regfiles); |
| for (i = 0; i < regfiles; ++i) { |
| const char *name = xtensa_regfile_name(config->isa, i); |
| int entries = xtensa_regfile_num_entries(config->isa, i); |
| int bits = xtensa_regfile_num_bits(config->isa, i); |
| |
| config->regfile[i] = xtensa_get_regfile_by_name(name, entries, bits); |
| #ifdef DEBUG |
| if (config->regfile[i] == NULL) { |
| fprintf(stderr, "regfile '%s' not found for %s\n", |
| name, config->name); |
| } |
| #endif |
| } |
| xtensa_collect_sr_names(config); |
| } |
| |
| static void xtensa_finalize_config(XtensaConfig *config) |
| { |
| if (config->isa_internal) { |
| init_libisa(config); |
| } |
| |
| if (config->gdb_regmap.num_regs == 0 || |
| config->gdb_regmap.num_core_regs == 0) { |
| unsigned n_regs = 0; |
| unsigned n_core_regs = 0; |
| |
| xtensa_count_regs(config, &n_regs, &n_core_regs); |
| if (config->gdb_regmap.num_regs == 0) { |
| config->gdb_regmap.num_regs = n_regs; |
| } |
| if (config->gdb_regmap.num_core_regs == 0) { |
| config->gdb_regmap.num_core_regs = n_core_regs; |
| } |
| } |
| } |
| |
| static void xtensa_core_class_init(ObjectClass *oc, void *data) |
| { |
| CPUClass *cc = CPU_CLASS(oc); |
| XtensaCPUClass *xcc = XTENSA_CPU_CLASS(oc); |
| XtensaConfig *config = data; |
| |
| xtensa_finalize_config(config); |
| xcc->config = config; |
| |
| /* |
| * Use num_core_regs to see only non-privileged registers in an unmodified |
| * gdb. Use num_regs to see all registers. gdb modification is required |
| * for that: reset bit 0 in the 'flags' field of the registers definitions |
| * in the gdb/xtensa-config.c inside gdb source tree or inside gdb overlay. |
| */ |
| cc->gdb_num_core_regs = config->gdb_regmap.num_regs; |
| } |
| |
| void xtensa_register_core(XtensaConfigList *node) |
| { |
| TypeInfo type = { |
| .parent = TYPE_XTENSA_CPU, |
| .class_init = xtensa_core_class_init, |
| .class_data = (void *)node->config, |
| }; |
| |
| node->next = xtensa_cores; |
| xtensa_cores = node; |
| type.name = g_strdup_printf(XTENSA_CPU_TYPE_NAME("%s"), node->config->name); |
| type_register(&type); |
| g_free((gpointer)type.name); |
| } |
| |
| static uint32_t check_hw_breakpoints(CPUXtensaState *env) |
| { |
| unsigned i; |
| |
| for (i = 0; i < env->config->ndbreak; ++i) { |
| if (env->cpu_watchpoint[i] && |
| env->cpu_watchpoint[i]->flags & BP_WATCHPOINT_HIT) { |
| return DEBUGCAUSE_DB | (i << DEBUGCAUSE_DBNUM_SHIFT); |
| } |
| } |
| return 0; |
| } |
| |
| void xtensa_breakpoint_handler(CPUState *cs) |
| { |
| XtensaCPU *cpu = XTENSA_CPU(cs); |
| CPUXtensaState *env = &cpu->env; |
| |
| if (cs->watchpoint_hit) { |
| if (cs->watchpoint_hit->flags & BP_CPU) { |
| uint32_t cause; |
| |
| cs->watchpoint_hit = NULL; |
| cause = check_hw_breakpoints(env); |
| if (cause) { |
| debug_exception_env(env, cause); |
| } |
| cpu_loop_exit_noexc(cs); |
| } |
| } |
| } |
| |
| void xtensa_cpu_list(void) |
| { |
| XtensaConfigList *core = xtensa_cores; |
| qemu_printf("Available CPUs:\n"); |
| for (; core; core = core->next) { |
| qemu_printf(" %s\n", core->config->name); |
| } |
| } |
| |
| #ifndef CONFIG_USER_ONLY |
| void xtensa_cpu_do_unaligned_access(CPUState *cs, |
| vaddr addr, MMUAccessType access_type, |
| int mmu_idx, uintptr_t retaddr) |
| { |
| XtensaCPU *cpu = XTENSA_CPU(cs); |
| CPUXtensaState *env = &cpu->env; |
| |
| assert(xtensa_option_enabled(env->config, |
| XTENSA_OPTION_UNALIGNED_EXCEPTION)); |
| cpu_restore_state(CPU(cpu), retaddr, true); |
| HELPER(exception_cause_vaddr)(env, |
| env->pc, LOAD_STORE_ALIGNMENT_CAUSE, |
| addr); |
| } |
| |
| bool xtensa_cpu_tlb_fill(CPUState *cs, vaddr address, int size, |
| MMUAccessType access_type, int mmu_idx, |
| bool probe, uintptr_t retaddr) |
| { |
| XtensaCPU *cpu = XTENSA_CPU(cs); |
| CPUXtensaState *env = &cpu->env; |
| uint32_t paddr; |
| uint32_t page_size; |
| unsigned access; |
| int ret = xtensa_get_physical_addr(env, true, address, access_type, |
| mmu_idx, &paddr, &page_size, &access); |
| |
| qemu_log_mask(CPU_LOG_MMU, "%s(%08" VADDR_PRIx |
| ", %d, %d) -> %08x, ret = %d\n", |
| __func__, address, access_type, mmu_idx, paddr, ret); |
| |
| if (ret == 0) { |
| tlb_set_page(cs, |
| address & TARGET_PAGE_MASK, |
| paddr & TARGET_PAGE_MASK, |
| access, mmu_idx, page_size); |
| return true; |
| } else if (probe) { |
| return false; |
| } else { |
| cpu_restore_state(cs, retaddr, true); |
| HELPER(exception_cause_vaddr)(env, env->pc, ret, address); |
| } |
| } |
| |
| void xtensa_cpu_do_transaction_failed(CPUState *cs, hwaddr physaddr, vaddr addr, |
| unsigned size, MMUAccessType access_type, |
| int mmu_idx, MemTxAttrs attrs, |
| MemTxResult response, uintptr_t retaddr) |
| { |
| XtensaCPU *cpu = XTENSA_CPU(cs); |
| CPUXtensaState *env = &cpu->env; |
| |
| cpu_restore_state(cs, retaddr, true); |
| HELPER(exception_cause_vaddr)(env, env->pc, |
| access_type == MMU_INST_FETCH ? |
| INSTR_PIF_ADDR_ERROR_CAUSE : |
| LOAD_STORE_PIF_ADDR_ERROR_CAUSE, |
| addr); |
| } |
| |
| void xtensa_runstall(CPUXtensaState *env, bool runstall) |
| { |
| CPUState *cpu = env_cpu(env); |
| |
| env->runstall = runstall; |
| cpu->halted = runstall; |
| if (runstall) { |
| cpu_interrupt(cpu, CPU_INTERRUPT_HALT); |
| } else { |
| qemu_cpu_kick(cpu); |
| } |
| } |
| #endif /* !CONFIG_USER_ONLY */ |