| /* SPDX-License-Identifier: MIT */ |
| /****************************************************************************** |
| * sched.h |
| * |
| * Scheduler state interactions |
| * |
| * Copyright (c) 2005, Keir Fraser <keir@xensource.com> |
| */ |
| |
| #ifndef __XEN_PUBLIC_SCHED_H__ |
| #define __XEN_PUBLIC_SCHED_H__ |
| |
| #include "event_channel.h" |
| |
| /* |
| * `incontents 150 sched Guest Scheduler Operations |
| * |
| * The SCHEDOP interface provides mechanisms for a guest to interact |
| * with the scheduler, including yield, blocking and shutting itself |
| * down. |
| */ |
| |
| /* |
| * The prototype for this hypercall is: |
| * ` long HYPERVISOR_sched_op(enum sched_op cmd, void *arg, ...) |
| * |
| * @cmd == SCHEDOP_??? (scheduler operation). |
| * @arg == Operation-specific extra argument(s), as described below. |
| * ... == Additional Operation-specific extra arguments, described below. |
| * |
| * Versions of Xen prior to 3.0.2 provided only the following legacy version |
| * of this hypercall, supporting only the commands yield, block and shutdown: |
| * long sched_op(int cmd, unsigned long arg) |
| * @cmd == SCHEDOP_??? (scheduler operation). |
| * @arg == 0 (SCHEDOP_yield and SCHEDOP_block) |
| * == SHUTDOWN_* code (SCHEDOP_shutdown) |
| * |
| * This legacy version is available to new guests as: |
| * ` long HYPERVISOR_sched_op_compat(enum sched_op cmd, unsigned long arg) |
| */ |
| |
| /* ` enum sched_op { // SCHEDOP_* => struct sched_* */ |
| /* |
| * Voluntarily yield the CPU. |
| * @arg == NULL. |
| */ |
| #define SCHEDOP_yield 0 |
| |
| /* |
| * Block execution of this VCPU until an event is received for processing. |
| * If called with event upcalls masked, this operation will atomically |
| * reenable event delivery and check for pending events before blocking the |
| * VCPU. This avoids a "wakeup waiting" race. |
| * @arg == NULL. |
| */ |
| #define SCHEDOP_block 1 |
| |
| /* |
| * Halt execution of this domain (all VCPUs) and notify the system controller. |
| * @arg == pointer to sched_shutdown_t structure. |
| * |
| * If the sched_shutdown_t reason is SHUTDOWN_suspend then |
| * x86 PV guests must also set RDX (EDX for 32-bit guests) to the MFN |
| * of the guest's start info page. RDX/EDX is the third hypercall |
| * argument. |
| * |
| * In addition, which reason is SHUTDOWN_suspend this hypercall |
| * returns 1 if suspend was cancelled or the domain was merely |
| * checkpointed, and 0 if it is resuming in a new domain. |
| */ |
| #define SCHEDOP_shutdown 2 |
| |
| /* |
| * Poll a set of event-channel ports. Return when one or more are pending. An |
| * optional timeout may be specified. |
| * @arg == pointer to sched_poll_t structure. |
| */ |
| #define SCHEDOP_poll 3 |
| |
| /* |
| * Declare a shutdown for another domain. The main use of this function is |
| * in interpreting shutdown requests and reasons for fully-virtualized |
| * domains. A para-virtualized domain may use SCHEDOP_shutdown directly. |
| * @arg == pointer to sched_remote_shutdown_t structure. |
| */ |
| #define SCHEDOP_remote_shutdown 4 |
| |
| /* |
| * Latch a shutdown code, so that when the domain later shuts down it |
| * reports this code to the control tools. |
| * @arg == sched_shutdown_t, as for SCHEDOP_shutdown. |
| */ |
| #define SCHEDOP_shutdown_code 5 |
| |
| /* |
| * Setup, poke and destroy a domain watchdog timer. |
| * @arg == pointer to sched_watchdog_t structure. |
| * With id == 0, setup a domain watchdog timer to cause domain shutdown |
| * after timeout, returns watchdog id. |
| * With id != 0 and timeout == 0, destroy domain watchdog timer. |
| * With id != 0 and timeout != 0, poke watchdog timer and set new timeout. |
| */ |
| #define SCHEDOP_watchdog 6 |
| |
| /* |
| * Override the current vcpu affinity by pinning it to one physical cpu or |
| * undo this override restoring the previous affinity. |
| * @arg == pointer to sched_pin_override_t structure. |
| * |
| * A negative pcpu value will undo a previous pin override and restore the |
| * previous cpu affinity. |
| * This call is allowed for the hardware domain only and requires the cpu |
| * to be part of the domain's cpupool. |
| */ |
| #define SCHEDOP_pin_override 7 |
| /* ` } */ |
| |
| struct sched_shutdown { |
| unsigned int reason; /* SHUTDOWN_* => enum sched_shutdown_reason */ |
| }; |
| typedef struct sched_shutdown sched_shutdown_t; |
| DEFINE_XEN_GUEST_HANDLE(sched_shutdown_t); |
| |
| struct sched_poll { |
| XEN_GUEST_HANDLE(evtchn_port_t) ports; |
| unsigned int nr_ports; |
| uint64_t timeout; |
| }; |
| typedef struct sched_poll sched_poll_t; |
| DEFINE_XEN_GUEST_HANDLE(sched_poll_t); |
| |
| struct sched_remote_shutdown { |
| domid_t domain_id; /* Remote domain ID */ |
| unsigned int reason; /* SHUTDOWN_* => enum sched_shutdown_reason */ |
| }; |
| typedef struct sched_remote_shutdown sched_remote_shutdown_t; |
| DEFINE_XEN_GUEST_HANDLE(sched_remote_shutdown_t); |
| |
| struct sched_watchdog { |
| uint32_t id; /* watchdog ID */ |
| uint32_t timeout; /* timeout */ |
| }; |
| typedef struct sched_watchdog sched_watchdog_t; |
| DEFINE_XEN_GUEST_HANDLE(sched_watchdog_t); |
| |
| struct sched_pin_override { |
| int32_t pcpu; |
| }; |
| typedef struct sched_pin_override sched_pin_override_t; |
| DEFINE_XEN_GUEST_HANDLE(sched_pin_override_t); |
| |
| /* |
| * Reason codes for SCHEDOP_shutdown. These may be interpreted by control |
| * software to determine the appropriate action. For the most part, Xen does |
| * not care about the shutdown code. |
| */ |
| /* ` enum sched_shutdown_reason { */ |
| #define SHUTDOWN_poweroff 0 /* Domain exited normally. Clean up and kill. */ |
| #define SHUTDOWN_reboot 1 /* Clean up, kill, and then restart. */ |
| #define SHUTDOWN_suspend 2 /* Clean up, save suspend info, kill. */ |
| #define SHUTDOWN_crash 3 /* Tell controller we've crashed. */ |
| #define SHUTDOWN_watchdog 4 /* Restart because watchdog time expired. */ |
| |
| /* |
| * Domain asked to perform 'soft reset' for it. The expected behavior is to |
| * reset internal Xen state for the domain returning it to the point where it |
| * was created but leaving the domain's memory contents and vCPU contexts |
| * intact. This will allow the domain to start over and set up all Xen specific |
| * interfaces again. |
| */ |
| #define SHUTDOWN_soft_reset 5 |
| #define SHUTDOWN_MAX 5 /* Maximum valid shutdown reason. */ |
| /* ` } */ |
| |
| #endif /* __XEN_PUBLIC_SCHED_H__ */ |
| |
| /* |
| * Local variables: |
| * mode: C |
| * c-file-style: "BSD" |
| * c-basic-offset: 4 |
| * tab-width: 4 |
| * indent-tabs-mode: nil |
| * End: |
| */ |