| /* |
| * BCM2835 SOC MPHI emulation |
| * |
| * Very basic emulation, only providing the FIQ interrupt needed to |
| * allow the dwc-otg USB host controller driver in the Raspbian kernel |
| * to function. |
| * |
| * Copyright (c) 2020 Paul Zimmerman <pauldzim@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "hw/misc/bcm2835_mphi.h" |
| #include "migration/vmstate.h" |
| #include "qemu/error-report.h" |
| #include "qemu/log.h" |
| #include "qemu/main-loop.h" |
| |
| static inline void mphi_raise_irq(BCM2835MphiState *s) |
| { |
| qemu_set_irq(s->irq, 1); |
| } |
| |
| static inline void mphi_lower_irq(BCM2835MphiState *s) |
| { |
| qemu_set_irq(s->irq, 0); |
| } |
| |
| static uint64_t mphi_reg_read(void *ptr, hwaddr addr, unsigned size) |
| { |
| BCM2835MphiState *s = ptr; |
| uint32_t val = 0; |
| |
| switch (addr) { |
| case 0x28: /* outdda */ |
| val = s->outdda; |
| break; |
| case 0x2c: /* outddb */ |
| val = s->outddb; |
| break; |
| case 0x4c: /* ctrl */ |
| val = s->ctrl; |
| val |= 1 << 17; |
| break; |
| case 0x50: /* intstat */ |
| val = s->intstat; |
| break; |
| case 0x1f0: /* swirq_set */ |
| val = s->swirq; |
| break; |
| case 0x1f4: /* swirq_clr */ |
| val = s->swirq; |
| break; |
| default: |
| qemu_log_mask(LOG_UNIMP, "read from unknown register"); |
| break; |
| } |
| |
| return val; |
| } |
| |
| static void mphi_reg_write(void *ptr, hwaddr addr, uint64_t val, unsigned size) |
| { |
| BCM2835MphiState *s = ptr; |
| int do_irq = 0; |
| |
| switch (addr) { |
| case 0x28: /* outdda */ |
| s->outdda = val; |
| break; |
| case 0x2c: /* outddb */ |
| s->outddb = val; |
| if (val & (1 << 29)) { |
| do_irq = 1; |
| } |
| break; |
| case 0x4c: /* ctrl */ |
| s->ctrl = val; |
| if (val & (1 << 16)) { |
| do_irq = -1; |
| } |
| break; |
| case 0x50: /* intstat */ |
| s->intstat = val; |
| if (val & ((1 << 16) | (1 << 29))) { |
| do_irq = -1; |
| } |
| break; |
| case 0x1f0: /* swirq_set */ |
| s->swirq |= val; |
| do_irq = 1; |
| break; |
| case 0x1f4: /* swirq_clr */ |
| s->swirq &= ~val; |
| do_irq = -1; |
| break; |
| default: |
| qemu_log_mask(LOG_UNIMP, "write to unknown register"); |
| return; |
| } |
| |
| if (do_irq > 0) { |
| mphi_raise_irq(s); |
| } else if (do_irq < 0) { |
| mphi_lower_irq(s); |
| } |
| } |
| |
| static const MemoryRegionOps mphi_mmio_ops = { |
| .read = mphi_reg_read, |
| .write = mphi_reg_write, |
| .impl.min_access_size = 4, |
| .impl.max_access_size = 4, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static void mphi_reset(DeviceState *dev) |
| { |
| BCM2835MphiState *s = BCM2835_MPHI(dev); |
| |
| s->outdda = 0; |
| s->outddb = 0; |
| s->ctrl = 0; |
| s->intstat = 0; |
| s->swirq = 0; |
| } |
| |
| static void mphi_realize(DeviceState *dev, Error **errp) |
| { |
| SysBusDevice *sbd = SYS_BUS_DEVICE(dev); |
| BCM2835MphiState *s = BCM2835_MPHI(dev); |
| |
| sysbus_init_irq(sbd, &s->irq); |
| } |
| |
| static void mphi_init(Object *obj) |
| { |
| SysBusDevice *sbd = SYS_BUS_DEVICE(obj); |
| BCM2835MphiState *s = BCM2835_MPHI(obj); |
| |
| memory_region_init_io(&s->iomem, obj, &mphi_mmio_ops, s, "mphi", MPHI_MMIO_SIZE); |
| sysbus_init_mmio(sbd, &s->iomem); |
| } |
| |
| const VMStateDescription vmstate_mphi_state = { |
| .name = "mphi", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (const VMStateField[]) { |
| VMSTATE_UINT32(outdda, BCM2835MphiState), |
| VMSTATE_UINT32(outddb, BCM2835MphiState), |
| VMSTATE_UINT32(ctrl, BCM2835MphiState), |
| VMSTATE_UINT32(intstat, BCM2835MphiState), |
| VMSTATE_UINT32(swirq, BCM2835MphiState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void mphi_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = mphi_realize; |
| dc->reset = mphi_reset; |
| dc->vmsd = &vmstate_mphi_state; |
| } |
| |
| static const TypeInfo bcm2835_mphi_type_info = { |
| .name = TYPE_BCM2835_MPHI, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(BCM2835MphiState), |
| .instance_init = mphi_init, |
| .class_init = mphi_class_init, |
| }; |
| |
| static void bcm2835_mphi_register_types(void) |
| { |
| type_register_static(&bcm2835_mphi_type_info); |
| } |
| |
| type_init(bcm2835_mphi_register_types) |