hw/intc/pl190.c - qemu - Git at Google

 /*
  * Arm PrimeCell PL190 Vector Interrupt Controller
  *
  * Copyright (c) 2006 CodeSourcery.
  * Written by Paul Brook
  *
  * This code is licensed under the GPL.
  */

 #include "qemu/osdep.h"
 #include "hw/irq.h"
 #include "hw/sysbus.h"
 #include "migration/vmstate.h"
 #include "qemu/log.h"
 #include "qemu/module.h"
 #include "qom/object.h"

 /* The number of virtual priority levels.  16 user vectors plus the
    unvectored IRQ.  Chained interrupts would require an additional level
    if implemented.  */

 #define PL190_NUM_PRIO 17

 #define TYPE_PL190 "pl190"
 OBJECT_DECLARE_SIMPLE_TYPE(PL190State, PL190)

 struct PL190State {
     SysBusDevice parent_obj;

     MemoryRegion iomem;
     uint32_t level;
     uint32_t soft_level;
     uint32_t irq_enable;
     uint32_t fiq_select;
     uint8_t vect_control[16];
     uint32_t vect_addr[PL190_NUM_PRIO];
     /* Mask containing interrupts with higher priority than this one.  */
     uint32_t prio_mask[PL190_NUM_PRIO + 1];
     int protected;
     /* Current priority level.  */
     int priority;
     int prev_prio[PL190_NUM_PRIO];
     qemu_irq irq;
     qemu_irq fiq;
 };

 static const unsigned char pl190_id[] =
 { 0x90, 0x11, 0x04, 0x00, 0x0D, 0xf0, 0x05, 0xb1 };

 static inline uint32_t pl190_irq_level(PL190State *s)
 {
     return (s->level | s->soft_level) & s->irq_enable & ~s->fiq_select;
 }

 /* Update interrupts.  */
 static void pl190_update(PL190State *s)
 {
     uint32_t level = pl190_irq_level(s);
     int set;

     set = (level & s->prio_mask[s->priority]) != 0;
     qemu_set_irq(s->irq, set);
     set = ((s->level | s->soft_level) & s->fiq_select) != 0;
     qemu_set_irq(s->fiq, set);
 }

 static void pl190_set_irq(void *opaque, int irq, int level)
 {
     PL190State *s = (PL190State *)opaque;

     if (level)
         s->level |= 1u << irq;
     else
         s->level &= ~(1u << irq);
     pl190_update(s);
 }

 static void pl190_update_vectors(PL190State *s)
 {
     uint32_t mask;
     int i;
     int n;

     mask = 0;
     for (i = 0; i < 16; i++)
       {
         s->prio_mask[i] = mask;
         if (s->vect_control[i] & 0x20)
           {
             n = s->vect_control[i] & 0x1f;
             mask |= 1 << n;
           }
       }
     s->prio_mask[16] = mask;
     pl190_update(s);
 }

 static uint64_t pl190_read(void *opaque, hwaddr offset,
                            unsigned size)
 {
     PL190State *s = (PL190State *)opaque;
     int i;

     if (offset >= 0xfe0 && offset < 0x1000) {
         return pl190_id[(offset - 0xfe0) >> 2];
     }
     if (offset >= 0x100 && offset < 0x140) {
         return s->vect_addr[(offset - 0x100) >> 2];
     }
     if (offset >= 0x200 && offset < 0x240) {
         return s->vect_control[(offset - 0x200) >> 2];
     }
     switch (offset >> 2) {
     case 0: /* IRQSTATUS */
         return pl190_irq_level(s);
     case 1: /* FIQSATUS */
         return (s->level | s->soft_level) & s->fiq_select;
     case 2: /* RAWINTR */
         return s->level | s->soft_level;
     case 3: /* INTSELECT */
         return s->fiq_select;
     case 4: /* INTENABLE */
         return s->irq_enable;
     case 6: /* SOFTINT */
         return s->soft_level;
     case 8: /* PROTECTION */
         return s->protected;
     case 12: /* VECTADDR */
         /* Read vector address at the start of an ISR.  Increases the
          * current priority level to that of the current interrupt.
          *
          * Since an enabled interrupt X at priority P causes prio_mask[Y]
          * to have bit X set for all Y > P, this loop will stop with
          * i == the priority of the highest priority set interrupt.
          */
         for (i = 0; i < s->priority; i++) {
             if ((s->level | s->soft_level) & s->prio_mask[i + 1]) {
                 break;
             }
         }

         /* Reading this value with no pending interrupts is undefined.
            We return the default address.  */
         if (i == PL190_NUM_PRIO)
           return s->vect_addr[16];
         if (i < s->priority)
           {
             s->prev_prio[i] = s->priority;
             s->priority = i;
             pl190_update(s);
           }
         return s->vect_addr[s->priority];
     case 13: /* DEFVECTADDR */
         return s->vect_addr[16];
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                       "pl190_read: Bad offset %x\n", (int)offset);
         return 0;
     }
 }

 static void pl190_write(void *opaque, hwaddr offset,
                         uint64_t val, unsigned size)
 {
     PL190State *s = (PL190State *)opaque;

     if (offset >= 0x100 && offset < 0x140) {
         s->vect_addr[(offset - 0x100) >> 2] = val;
         pl190_update_vectors(s);
         return;
     }
     if (offset >= 0x200 && offset < 0x240) {
         s->vect_control[(offset - 0x200) >> 2] = val;
         pl190_update_vectors(s);
         return;
     }
     switch (offset >> 2) {
     case 0: /* SELECT */
         /* This is a readonly register, but linux tries to write to it
            anyway.  Ignore the write.  */
         break;
     case 3: /* INTSELECT */
         s->fiq_select = val;
         break;
     case 4: /* INTENABLE */
         s->irq_enable |= val;
         break;
     case 5: /* INTENCLEAR */
         s->irq_enable &= ~val;
         break;
     case 6: /* SOFTINT */
         s->soft_level |= val;
         break;
     case 7: /* SOFTINTCLEAR */
         s->soft_level &= ~val;
         break;
     case 8: /* PROTECTION */
         /* TODO: Protection (supervisor only access) is not implemented.  */
         s->protected = val & 1;
         break;
     case 12: /* VECTADDR */
         /* Restore the previous priority level.  The value written is
            ignored.  */
         if (s->priority < PL190_NUM_PRIO)
             s->priority = s->prev_prio[s->priority];
         break;
     case 13: /* DEFVECTADDR */
         s->vect_addr[16] = val;
         break;
     case 0xc0: /* ITCR */
         if (val) {
             qemu_log_mask(LOG_UNIMP, "pl190: Test mode not implemented\n");
         }
         break;
     default:
         qemu_log_mask(LOG_GUEST_ERROR,
                      "pl190_write: Bad offset %x\n", (int)offset);
         return;
     }
     pl190_update(s);
 }

 static const MemoryRegionOps pl190_ops = {
     .read = pl190_read,
     .write = pl190_write,
     .endianness = DEVICE_NATIVE_ENDIAN,
 };

 static void pl190_reset(DeviceState *d)
 {
     PL190State *s = PL190(d);
     int i;

     for (i = 0; i < 16; i++) {
         s->vect_addr[i] = 0;
         s->vect_control[i] = 0;
     }
     s->vect_addr[16] = 0;
     s->prio_mask[17] = 0xffffffff;
     s->priority = PL190_NUM_PRIO;
     pl190_update_vectors(s);
 }

 static void pl190_init(Object *obj)
 {
     DeviceState *dev = DEVICE(obj);
     PL190State *s = PL190(obj);
     SysBusDevice *sbd = SYS_BUS_DEVICE(obj);

     memory_region_init_io(&s->iomem, obj, &pl190_ops, s, "pl190", 0x1000);
     sysbus_init_mmio(sbd, &s->iomem);
     qdev_init_gpio_in(dev, pl190_set_irq, 32);
     sysbus_init_irq(sbd, &s->irq);
     sysbus_init_irq(sbd, &s->fiq);
 }

 static const VMStateDescription vmstate_pl190 = {
     .name = "pl190",
     .version_id = 1,
     .minimum_version_id = 1,
     .fields = (VMStateField[]) {
         VMSTATE_UINT32(level, PL190State),
         VMSTATE_UINT32(soft_level, PL190State),
         VMSTATE_UINT32(irq_enable, PL190State),
         VMSTATE_UINT32(fiq_select, PL190State),
         VMSTATE_UINT8_ARRAY(vect_control, PL190State, 16),
         VMSTATE_UINT32_ARRAY(vect_addr, PL190State, PL190_NUM_PRIO),
         VMSTATE_UINT32_ARRAY(prio_mask, PL190State, PL190_NUM_PRIO+1),
         VMSTATE_INT32(protected, PL190State),
         VMSTATE_INT32(priority, PL190State),
         VMSTATE_INT32_ARRAY(prev_prio, PL190State, PL190_NUM_PRIO),
         VMSTATE_END_OF_LIST()
     }
 };

 static void pl190_class_init(ObjectClass *klass, void *data)
 {
     DeviceClass *dc = DEVICE_CLASS(klass);

     dc->reset = pl190_reset;
     dc->vmsd = &vmstate_pl190;
 }

 static const TypeInfo pl190_info = {
     .name          = TYPE_PL190,
     .parent        = TYPE_SYS_BUS_DEVICE,
     .instance_size = sizeof(PL190State),
     .instance_init = pl190_init,
     .class_init    = pl190_class_init,
 };

 static void pl190_register_types(void)
 {
     type_register_static(&pl190_info);
 }

 type_init(pl190_register_types)
	/*
	* Arm PrimeCell PL190 Vector Interrupt Controller
	*
	* Copyright (c) 2006 CodeSourcery.
	* Written by Paul Brook
	*
	* This code is licensed under the GPL.
	*/

	#include "qemu/osdep.h"
	#include "hw/irq.h"
	#include "hw/sysbus.h"
	#include "migration/vmstate.h"
	#include "qemu/log.h"
	#include "qemu/module.h"
	#include "qom/object.h"

	/* The number of virtual priority levels. 16 user vectors plus the
	unvectored IRQ. Chained interrupts would require an additional level
	if implemented. */

	#define PL190_NUM_PRIO 17

	#define TYPE_PL190 "pl190"
	OBJECT_DECLARE_SIMPLE_TYPE(PL190State, PL190)

	struct PL190State {
	SysBusDevice parent_obj;

	MemoryRegion iomem;
	uint32_t level;
	uint32_t soft_level;
	uint32_t irq_enable;
	uint32_t fiq_select;
	uint8_t vect_control[16];
	uint32_t vect_addr[PL190_NUM_PRIO];
	/* Mask containing interrupts with higher priority than this one. */
	uint32_t prio_mask[PL190_NUM_PRIO + 1];
	int protected;
	/* Current priority level. */
	int priority;
	int prev_prio[PL190_NUM_PRIO];
	qemu_irq irq;
	qemu_irq fiq;
	};

	static const unsigned char pl190_id[] =
	{ 0x90, 0x11, 0x04, 0x00, 0x0D, 0xf0, 0x05, 0xb1 };

	static inline uint32_t pl190_irq_level(PL190State *s)
	{
	return (s->level \| s->soft_level) & s->irq_enable & ~s->fiq_select;
	}

	/* Update interrupts. */
	static void pl190_update(PL190State *s)
	{
	uint32_t level = pl190_irq_level(s);
	int set;

	set = (level & s->prio_mask[s->priority]) != 0;
	qemu_set_irq(s->irq, set);
	set = ((s->level \| s->soft_level) & s->fiq_select) != 0;
	qemu_set_irq(s->fiq, set);
	}

	static void pl190_set_irq(void *opaque, int irq, int level)
	{
	PL190State s = (PL190State )opaque;

	if (level)
	s->level \|= 1u << irq;
	else
	s->level &= ~(1u << irq);
	pl190_update(s);
	}

	static void pl190_update_vectors(PL190State *s)
	{
	uint32_t mask;
	int i;
	int n;

	mask = 0;
	for (i = 0; i < 16; i++)
	{
	s->prio_mask[i] = mask;
	if (s->vect_control[i] & 0x20)
	{
	n = s->vect_control[i] & 0x1f;
	mask \|= 1 << n;
	}
	}
	s->prio_mask[16] = mask;
	pl190_update(s);
	}

	static uint64_t pl190_read(void *opaque, hwaddr offset,
	unsigned size)
	{
	PL190State s = (PL190State )opaque;
	int i;

	if (offset >= 0xfe0 && offset < 0x1000) {
	return pl190_id[(offset - 0xfe0) >> 2];
	}
	if (offset >= 0x100 && offset < 0x140) {
	return s->vect_addr[(offset - 0x100) >> 2];
	}
	if (offset >= 0x200 && offset < 0x240) {
	return s->vect_control[(offset - 0x200) >> 2];
	}
	switch (offset >> 2) {
	case 0: /* IRQSTATUS */
	return pl190_irq_level(s);
	case 1: /* FIQSATUS */
	return (s->level \| s->soft_level) & s->fiq_select;
	case 2: /* RAWINTR */
	return s->level \| s->soft_level;
	case 3: /* INTSELECT */
	return s->fiq_select;
	case 4: /* INTENABLE */
	return s->irq_enable;
	case 6: /* SOFTINT */
	return s->soft_level;
	case 8: /* PROTECTION */
	return s->protected;
	case 12: /* VECTADDR */
	/* Read vector address at the start of an ISR. Increases the
	* current priority level to that of the current interrupt.
	*
	* Since an enabled interrupt X at priority P causes prio_mask[Y]
	* to have bit X set for all Y > P, this loop will stop with
	* i == the priority of the highest priority set interrupt.
	*/
	for (i = 0; i < s->priority; i++) {
	if ((s->level \| s->soft_level) & s->prio_mask[i + 1]) {
	break;
	}
	}

	/* Reading this value with no pending interrupts is undefined.
	We return the default address. */
	if (i == PL190_NUM_PRIO)
	return s->vect_addr[16];
	if (i < s->priority)
	{
	s->prev_prio[i] = s->priority;
	s->priority = i;
	pl190_update(s);
	}
	return s->vect_addr[s->priority];
	case 13: /* DEFVECTADDR */
	return s->vect_addr[16];
	default:
	qemu_log_mask(LOG_GUEST_ERROR,
	"pl190_read: Bad offset %x\n", (int)offset);
	return 0;
	}
	}

	static void pl190_write(void *opaque, hwaddr offset,
	uint64_t val, unsigned size)
	{
	PL190State s = (PL190State )opaque;

	if (offset >= 0x100 && offset < 0x140) {
	s->vect_addr[(offset - 0x100) >> 2] = val;
	pl190_update_vectors(s);
	return;
	}
	if (offset >= 0x200 && offset < 0x240) {
	s->vect_control[(offset - 0x200) >> 2] = val;
	pl190_update_vectors(s);
	return;
	}
	switch (offset >> 2) {
	case 0: /* SELECT */
	/* This is a readonly register, but linux tries to write to it
	anyway. Ignore the write. */
	break;
	case 3: /* INTSELECT */
	s->fiq_select = val;
	break;
	case 4: /* INTENABLE */
	s->irq_enable \|= val;
	break;
	case 5: /* INTENCLEAR */
	s->irq_enable &= ~val;
	break;
	case 6: /* SOFTINT */
	s->soft_level \|= val;
	break;
	case 7: /* SOFTINTCLEAR */
	s->soft_level &= ~val;
	break;
	case 8: /* PROTECTION */
	/* TODO: Protection (supervisor only access) is not implemented. */
	s->protected = val & 1;
	break;
	case 12: /* VECTADDR */
	/* Restore the previous priority level. The value written is
	ignored. */
	if (s->priority < PL190_NUM_PRIO)
	s->priority = s->prev_prio[s->priority];
	break;
	case 13: /* DEFVECTADDR */
	s->vect_addr[16] = val;
	break;
	case 0xc0: /* ITCR */
	if (val) {
	qemu_log_mask(LOG_UNIMP, "pl190: Test mode not implemented\n");
	}
	break;
	default:
	qemu_log_mask(LOG_GUEST_ERROR,
	"pl190_write: Bad offset %x\n", (int)offset);
	return;
	}
	pl190_update(s);
	}

	static const MemoryRegionOps pl190_ops = {
	.read = pl190_read,
	.write = pl190_write,
	.endianness = DEVICE_NATIVE_ENDIAN,
	};

	static void pl190_reset(DeviceState *d)
	{
	PL190State *s = PL190(d);
	int i;

	for (i = 0; i < 16; i++) {
	s->vect_addr[i] = 0;
	s->vect_control[i] = 0;
	}
	s->vect_addr[16] = 0;
	s->prio_mask[17] = 0xffffffff;
	s->priority = PL190_NUM_PRIO;
	pl190_update_vectors(s);
	}

	static void pl190_init(Object *obj)
	{
	DeviceState *dev = DEVICE(obj);
	PL190State *s = PL190(obj);
	SysBusDevice *sbd = SYS_BUS_DEVICE(obj);

	memory_region_init_io(&s->iomem, obj, &pl190_ops, s, "pl190", 0x1000);
	sysbus_init_mmio(sbd, &s->iomem);
	qdev_init_gpio_in(dev, pl190_set_irq, 32);
	sysbus_init_irq(sbd, &s->irq);
	sysbus_init_irq(sbd, &s->fiq);
	}

	static const VMStateDescription vmstate_pl190 = {
	.name = "pl190",
	.version_id = 1,
	.minimum_version_id = 1,
	.fields = (VMStateField[]) {
	VMSTATE_UINT32(level, PL190State),
	VMSTATE_UINT32(soft_level, PL190State),
	VMSTATE_UINT32(irq_enable, PL190State),
	VMSTATE_UINT32(fiq_select, PL190State),
	VMSTATE_UINT8_ARRAY(vect_control, PL190State, 16),
	VMSTATE_UINT32_ARRAY(vect_addr, PL190State, PL190_NUM_PRIO),
	VMSTATE_UINT32_ARRAY(prio_mask, PL190State, PL190_NUM_PRIO+1),
	VMSTATE_INT32(protected, PL190State),
	VMSTATE_INT32(priority, PL190State),
	VMSTATE_INT32_ARRAY(prev_prio, PL190State, PL190_NUM_PRIO),
	VMSTATE_END_OF_LIST()
	}
	};

	static void pl190_class_init(ObjectClass klass, void data)
	{
	DeviceClass *dc = DEVICE_CLASS(klass);

	dc->reset = pl190_reset;
	dc->vmsd = &vmstate_pl190;
	}

	static const TypeInfo pl190_info = {
	.name = TYPE_PL190,
	.parent = TYPE_SYS_BUS_DEVICE,
	.instance_size = sizeof(PL190State),
	.instance_init = pl190_init,
	.class_init = pl190_class_init,
	};

	static void pl190_register_types(void)
	{
	type_register_static(&pl190_info);
	}

	type_init(pl190_register_types)