|  | /* | 
|  | * USB redirector usb-guest | 
|  | * | 
|  | * Copyright (c) 2011-2012 Red Hat, Inc. | 
|  | * | 
|  | * Red Hat Authors: | 
|  | * Hans de Goede <hdegoede@redhat.com> | 
|  | * | 
|  | * Permission is hereby granted, free of charge, to any person obtaining a copy | 
|  | * of this software and associated documentation files (the "Software"), to deal | 
|  | * in the Software without restriction, including without limitation the rights | 
|  | * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell | 
|  | * copies of the Software, and to permit persons to whom the Software is | 
|  | * furnished to do so, subject to the following conditions: | 
|  | * | 
|  | * The above copyright notice and this permission notice shall be included in | 
|  | * all copies or substantial portions of the Software. | 
|  | * | 
|  | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | 
|  | * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | 
|  | * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | 
|  | * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER | 
|  | * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, | 
|  | * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN | 
|  | * THE SOFTWARE. | 
|  | */ | 
|  |  | 
|  | #include "qemu/osdep.h" | 
|  | #include "qemu/cutils.h" | 
|  | #include "qemu/units.h" | 
|  | #include "qapi/error.h" | 
|  | #include "qemu/timer.h" | 
|  | #include "sysemu/runstate.h" | 
|  | #include "sysemu/sysemu.h" | 
|  | #include "qapi/qmp/qerror.h" | 
|  | #include "qemu/error-report.h" | 
|  | #include "qemu/iov.h" | 
|  | #include "qemu/module.h" | 
|  | #include "chardev/char-fe.h" | 
|  |  | 
|  | #include <usbredirparser.h> | 
|  | #include <usbredirfilter.h> | 
|  |  | 
|  | #include "hw/qdev-properties.h" | 
|  | #include "hw/qdev-properties-system.h" | 
|  | #include "hw/usb.h" | 
|  | #include "migration/qemu-file-types.h" | 
|  | #include "migration/vmstate.h" | 
|  | #include "qom/object.h" | 
|  |  | 
|  | /* ERROR is defined below. Remove any previous definition. */ | 
|  | #undef ERROR | 
|  |  | 
|  | #define MAX_ENDPOINTS 32 | 
|  | #define NO_INTERFACE_INFO 255 /* Valid interface_count always <= 32 */ | 
|  | #define EP2I(ep_address) (((ep_address & 0x80) >> 3) | (ep_address & 0x0f)) | 
|  | #define I2EP(i) (((i & 0x10) << 3) | (i & 0x0f)) | 
|  | #define USBEP2I(usb_ep) (((usb_ep)->pid == USB_TOKEN_IN) ? \ | 
|  | ((usb_ep)->nr | 0x10) : ((usb_ep)->nr)) | 
|  | #define I2USBEP(d, i) (usb_ep_get(&(d)->dev, \ | 
|  | ((i) & 0x10) ? USB_TOKEN_IN : USB_TOKEN_OUT, \ | 
|  | (i) & 0x0f)) | 
|  |  | 
|  | #ifndef USBREDIR_VERSION /* This is not defined in older usbredir versions */ | 
|  | #define USBREDIR_VERSION 0 | 
|  | #endif | 
|  |  | 
|  | typedef struct USBRedirDevice USBRedirDevice; | 
|  |  | 
|  | /* Struct to hold buffered packets */ | 
|  | struct buf_packet { | 
|  | uint8_t *data; | 
|  | void *free_on_destroy; | 
|  | uint16_t len; | 
|  | uint16_t offset; | 
|  | uint8_t status; | 
|  | QTAILQ_ENTRY(buf_packet)next; | 
|  | }; | 
|  |  | 
|  | struct endp_data { | 
|  | USBRedirDevice *dev; | 
|  | uint8_t type; | 
|  | uint8_t interval; | 
|  | uint8_t interface; /* bInterfaceNumber this ep belongs to */ | 
|  | uint16_t max_packet_size; /* In bytes, not wMaxPacketSize format !! */ | 
|  | uint32_t max_streams; | 
|  | uint8_t iso_started; | 
|  | uint8_t iso_error; /* For reporting iso errors to the HC */ | 
|  | uint8_t interrupt_started; | 
|  | uint8_t interrupt_error; | 
|  | uint8_t bulk_receiving_enabled; | 
|  | uint8_t bulk_receiving_started; | 
|  | uint8_t bufpq_prefilled; | 
|  | uint8_t bufpq_dropping_packets; | 
|  | QTAILQ_HEAD(, buf_packet) bufpq; | 
|  | int32_t bufpq_size; | 
|  | int32_t bufpq_target_size; | 
|  | USBPacket *pending_async_packet; | 
|  | }; | 
|  |  | 
|  | struct PacketIdQueueEntry { | 
|  | uint64_t id; | 
|  | QTAILQ_ENTRY(PacketIdQueueEntry)next; | 
|  | }; | 
|  |  | 
|  | struct PacketIdQueue { | 
|  | USBRedirDevice *dev; | 
|  | const char *name; | 
|  | QTAILQ_HEAD(, PacketIdQueueEntry) head; | 
|  | int size; | 
|  | }; | 
|  |  | 
|  | struct USBRedirDevice { | 
|  | USBDevice dev; | 
|  | /* Properties */ | 
|  | CharBackend cs; | 
|  | bool enable_streams; | 
|  | bool suppress_remote_wake; | 
|  | bool in_write; | 
|  | uint8_t debug; | 
|  | int32_t bootindex; | 
|  | char *filter_str; | 
|  | /* Data passed from chardev the fd_read cb to the usbredirparser read cb */ | 
|  | const uint8_t *read_buf; | 
|  | int read_buf_size; | 
|  | /* Active chardev-watch-tag */ | 
|  | guint watch; | 
|  | /* For async handling of close / reject */ | 
|  | QEMUBH *chardev_close_bh; | 
|  | QEMUBH *device_reject_bh; | 
|  | /* To delay the usb attach in case of quick chardev close + open */ | 
|  | QEMUTimer *attach_timer; | 
|  | int64_t next_attach_time; | 
|  | struct usbredirparser *parser; | 
|  | struct endp_data endpoint[MAX_ENDPOINTS]; | 
|  | struct PacketIdQueue cancelled; | 
|  | struct PacketIdQueue already_in_flight; | 
|  | void (*buffered_bulk_in_complete)(USBRedirDevice *, USBPacket *, uint8_t); | 
|  | /* Data for device filtering */ | 
|  | struct usb_redir_device_connect_header device_info; | 
|  | struct usb_redir_interface_info_header interface_info; | 
|  | struct usbredirfilter_rule *filter_rules; | 
|  | int filter_rules_count; | 
|  | int compatible_speedmask; | 
|  | VMChangeStateEntry *vmstate; | 
|  | }; | 
|  |  | 
|  | #define TYPE_USB_REDIR "usb-redir" | 
|  | DECLARE_INSTANCE_CHECKER(USBRedirDevice, USB_REDIRECT, | 
|  | TYPE_USB_REDIR) | 
|  |  | 
|  | static void usbredir_hello(void *priv, struct usb_redir_hello_header *h); | 
|  | static void usbredir_device_connect(void *priv, | 
|  | struct usb_redir_device_connect_header *device_connect); | 
|  | static void usbredir_device_disconnect(void *priv); | 
|  | static void usbredir_interface_info(void *priv, | 
|  | struct usb_redir_interface_info_header *interface_info); | 
|  | static void usbredir_ep_info(void *priv, | 
|  | struct usb_redir_ep_info_header *ep_info); | 
|  | static void usbredir_configuration_status(void *priv, uint64_t id, | 
|  | struct usb_redir_configuration_status_header *configuration_status); | 
|  | static void usbredir_alt_setting_status(void *priv, uint64_t id, | 
|  | struct usb_redir_alt_setting_status_header *alt_setting_status); | 
|  | static void usbredir_iso_stream_status(void *priv, uint64_t id, | 
|  | struct usb_redir_iso_stream_status_header *iso_stream_status); | 
|  | static void usbredir_interrupt_receiving_status(void *priv, uint64_t id, | 
|  | struct usb_redir_interrupt_receiving_status_header | 
|  | *interrupt_receiving_status); | 
|  | static void usbredir_bulk_streams_status(void *priv, uint64_t id, | 
|  | struct usb_redir_bulk_streams_status_header *bulk_streams_status); | 
|  | static void usbredir_bulk_receiving_status(void *priv, uint64_t id, | 
|  | struct usb_redir_bulk_receiving_status_header *bulk_receiving_status); | 
|  | static void usbredir_control_packet(void *priv, uint64_t id, | 
|  | struct usb_redir_control_packet_header *control_packet, | 
|  | uint8_t *data, int data_len); | 
|  | static void usbredir_bulk_packet(void *priv, uint64_t id, | 
|  | struct usb_redir_bulk_packet_header *bulk_packet, | 
|  | uint8_t *data, int data_len); | 
|  | static void usbredir_iso_packet(void *priv, uint64_t id, | 
|  | struct usb_redir_iso_packet_header *iso_packet, | 
|  | uint8_t *data, int data_len); | 
|  | static void usbredir_interrupt_packet(void *priv, uint64_t id, | 
|  | struct usb_redir_interrupt_packet_header *interrupt_header, | 
|  | uint8_t *data, int data_len); | 
|  | static void usbredir_buffered_bulk_packet(void *priv, uint64_t id, | 
|  | struct usb_redir_buffered_bulk_packet_header *buffered_bulk_packet, | 
|  | uint8_t *data, int data_len); | 
|  |  | 
|  | static void usbredir_handle_status(USBRedirDevice *dev, USBPacket *p, | 
|  | int status); | 
|  |  | 
|  | #define VERSION "qemu usb-redir guest " QEMU_VERSION | 
|  |  | 
|  | /* | 
|  | * Logging stuff | 
|  | */ | 
|  |  | 
|  | #define ERROR(...) \ | 
|  | do { \ | 
|  | if (dev->debug >= usbredirparser_error) { \ | 
|  | error_report("usb-redir error: " __VA_ARGS__); \ | 
|  | } \ | 
|  | } while (0) | 
|  | #define WARNING(...) \ | 
|  | do { \ | 
|  | if (dev->debug >= usbredirparser_warning) { \ | 
|  | warn_report("" __VA_ARGS__); \ | 
|  | } \ | 
|  | } while (0) | 
|  | #define INFO(...) \ | 
|  | do { \ | 
|  | if (dev->debug >= usbredirparser_info) { \ | 
|  | error_report("usb-redir: " __VA_ARGS__); \ | 
|  | } \ | 
|  | } while (0) | 
|  | #define DPRINTF(...) \ | 
|  | do { \ | 
|  | if (dev->debug >= usbredirparser_debug) { \ | 
|  | error_report("usb-redir: " __VA_ARGS__); \ | 
|  | } \ | 
|  | } while (0) | 
|  | #define DPRINTF2(...) \ | 
|  | do { \ | 
|  | if (dev->debug >= usbredirparser_debug_data) { \ | 
|  | error_report("usb-redir: " __VA_ARGS__); \ | 
|  | } \ | 
|  | } while (0) | 
|  |  | 
|  | static void usbredir_log(void *priv, int level, const char *msg) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  |  | 
|  | if (dev->debug < level) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | error_report("%s", msg); | 
|  | } | 
|  |  | 
|  | static void usbredir_log_data(USBRedirDevice *dev, const char *desc, | 
|  | const uint8_t *data, int len) | 
|  | { | 
|  | if (dev->debug < usbredirparser_debug_data) { | 
|  | return; | 
|  | } | 
|  | qemu_hexdump(stderr, desc, data, len); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * usbredirparser io functions | 
|  | */ | 
|  |  | 
|  | static int usbredir_read(void *priv, uint8_t *data, int count) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  |  | 
|  | if (dev->read_buf_size < count) { | 
|  | count = dev->read_buf_size; | 
|  | } | 
|  |  | 
|  | memcpy(data, dev->read_buf, count); | 
|  |  | 
|  | dev->read_buf_size -= count; | 
|  | if (dev->read_buf_size) { | 
|  | dev->read_buf += count; | 
|  | } else { | 
|  | dev->read_buf = NULL; | 
|  | } | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static gboolean usbredir_write_unblocked(void *do_not_use, GIOCondition cond, | 
|  | void *opaque) | 
|  | { | 
|  | USBRedirDevice *dev = opaque; | 
|  |  | 
|  | dev->watch = 0; | 
|  | usbredirparser_do_write(dev->parser); | 
|  |  | 
|  | return G_SOURCE_REMOVE; | 
|  | } | 
|  |  | 
|  | static int usbredir_write(void *priv, uint8_t *data, int count) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  | int r; | 
|  |  | 
|  | if (!qemu_chr_fe_backend_open(&dev->cs)) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Don't send new data to the chardev until our state is fully synced */ | 
|  | if (!runstate_check(RUN_STATE_RUNNING)) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Recursion check */ | 
|  | if (dev->in_write) { | 
|  | DPRINTF("usbredir_write recursion\n"); | 
|  | return 0; | 
|  | } | 
|  | dev->in_write = true; | 
|  |  | 
|  | r = qemu_chr_fe_write(&dev->cs, data, count); | 
|  | if (r < count) { | 
|  | if (!dev->watch) { | 
|  | dev->watch = qemu_chr_fe_add_watch(&dev->cs, G_IO_OUT | G_IO_HUP, | 
|  | usbredir_write_unblocked, dev); | 
|  | } | 
|  | if (r < 0) { | 
|  | r = 0; | 
|  | } | 
|  | } | 
|  | dev->in_write = false; | 
|  | return r; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Cancelled and buffered packets helpers | 
|  | */ | 
|  |  | 
|  | static void packet_id_queue_init(struct PacketIdQueue *q, | 
|  | USBRedirDevice *dev, const char *name) | 
|  | { | 
|  | q->dev = dev; | 
|  | q->name = name; | 
|  | QTAILQ_INIT(&q->head); | 
|  | q->size = 0; | 
|  | } | 
|  |  | 
|  | static void packet_id_queue_add(struct PacketIdQueue *q, uint64_t id) | 
|  | { | 
|  | USBRedirDevice *dev = q->dev; | 
|  | struct PacketIdQueueEntry *e; | 
|  |  | 
|  | DPRINTF("adding packet id %"PRIu64" to %s queue\n", id, q->name); | 
|  |  | 
|  | e = g_new0(struct PacketIdQueueEntry, 1); | 
|  | e->id = id; | 
|  | QTAILQ_INSERT_TAIL(&q->head, e, next); | 
|  | q->size++; | 
|  | } | 
|  |  | 
|  | static int packet_id_queue_remove(struct PacketIdQueue *q, uint64_t id) | 
|  | { | 
|  | USBRedirDevice *dev = q->dev; | 
|  | struct PacketIdQueueEntry *e; | 
|  |  | 
|  | QTAILQ_FOREACH(e, &q->head, next) { | 
|  | if (e->id == id) { | 
|  | DPRINTF("removing packet id %"PRIu64" from %s queue\n", | 
|  | id, q->name); | 
|  | QTAILQ_REMOVE(&q->head, e, next); | 
|  | q->size--; | 
|  | g_free(e); | 
|  | return 1; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void packet_id_queue_empty(struct PacketIdQueue *q) | 
|  | { | 
|  | USBRedirDevice *dev = q->dev; | 
|  | struct PacketIdQueueEntry *e, *next_e; | 
|  |  | 
|  | DPRINTF("removing %d packet-ids from %s queue\n", q->size, q->name); | 
|  |  | 
|  | QTAILQ_FOREACH_SAFE(e, &q->head, next, next_e) { | 
|  | QTAILQ_REMOVE(&q->head, e, next); | 
|  | g_free(e); | 
|  | } | 
|  | q->size = 0; | 
|  | } | 
|  |  | 
|  | static void usbredir_cancel_packet(USBDevice *udev, USBPacket *p) | 
|  | { | 
|  | USBRedirDevice *dev = USB_REDIRECT(udev); | 
|  | int i = USBEP2I(p->ep); | 
|  |  | 
|  | if (p->combined) { | 
|  | usb_combined_packet_cancel(udev, p); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (dev->endpoint[i].pending_async_packet) { | 
|  | assert(dev->endpoint[i].pending_async_packet == p); | 
|  | dev->endpoint[i].pending_async_packet = NULL; | 
|  | return; | 
|  | } | 
|  |  | 
|  | packet_id_queue_add(&dev->cancelled, p->id); | 
|  | usbredirparser_send_cancel_data_packet(dev->parser, p->id); | 
|  | usbredirparser_do_write(dev->parser); | 
|  | } | 
|  |  | 
|  | static int usbredir_is_cancelled(USBRedirDevice *dev, uint64_t id) | 
|  | { | 
|  | if (!dev->dev.attached) { | 
|  | return 1; /* Treat everything as cancelled after a disconnect */ | 
|  | } | 
|  | return packet_id_queue_remove(&dev->cancelled, id); | 
|  | } | 
|  |  | 
|  | static void usbredir_fill_already_in_flight_from_ep(USBRedirDevice *dev, | 
|  | struct USBEndpoint *ep) | 
|  | { | 
|  | static USBPacket *p; | 
|  |  | 
|  | /* async handled packets for bulk receiving eps do not count as inflight */ | 
|  | if (dev->endpoint[USBEP2I(ep)].bulk_receiving_started) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | QTAILQ_FOREACH(p, &ep->queue, queue) { | 
|  | /* Skip combined packets, except for the first */ | 
|  | if (p->combined && p != p->combined->first) { | 
|  | continue; | 
|  | } | 
|  | if (p->state == USB_PACKET_ASYNC) { | 
|  | packet_id_queue_add(&dev->already_in_flight, p->id); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_fill_already_in_flight(USBRedirDevice *dev) | 
|  | { | 
|  | int ep; | 
|  | struct USBDevice *udev = &dev->dev; | 
|  |  | 
|  | usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_ctl); | 
|  |  | 
|  | for (ep = 0; ep < USB_MAX_ENDPOINTS; ep++) { | 
|  | usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_in[ep]); | 
|  | usbredir_fill_already_in_flight_from_ep(dev, &udev->ep_out[ep]); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int usbredir_already_in_flight(USBRedirDevice *dev, uint64_t id) | 
|  | { | 
|  | return packet_id_queue_remove(&dev->already_in_flight, id); | 
|  | } | 
|  |  | 
|  | static USBPacket *usbredir_find_packet_by_id(USBRedirDevice *dev, | 
|  | uint8_t ep, uint64_t id) | 
|  | { | 
|  | USBPacket *p; | 
|  |  | 
|  | if (usbredir_is_cancelled(dev, id)) { | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | p = usb_ep_find_packet_by_id(&dev->dev, | 
|  | (ep & USB_DIR_IN) ? USB_TOKEN_IN : USB_TOKEN_OUT, | 
|  | ep & 0x0f, id); | 
|  | if (p == NULL) { | 
|  | ERROR("could not find packet with id %"PRIu64"\n", id); | 
|  | } | 
|  | return p; | 
|  | } | 
|  |  | 
|  | static int bufp_alloc(USBRedirDevice *dev, uint8_t *data, uint16_t len, | 
|  | uint8_t status, uint8_t ep, void *free_on_destroy) | 
|  | { | 
|  | struct buf_packet *bufp; | 
|  |  | 
|  | if (!dev->endpoint[EP2I(ep)].bufpq_dropping_packets && | 
|  | dev->endpoint[EP2I(ep)].bufpq_size > | 
|  | 2 * dev->endpoint[EP2I(ep)].bufpq_target_size) { | 
|  | DPRINTF("bufpq overflow, dropping packets ep %02X\n", ep); | 
|  | dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 1; | 
|  | } | 
|  | /* Since we're interrupting the stream anyways, drop enough packets to get | 
|  | back to our target buffer size */ | 
|  | if (dev->endpoint[EP2I(ep)].bufpq_dropping_packets) { | 
|  | if (dev->endpoint[EP2I(ep)].bufpq_size > | 
|  | dev->endpoint[EP2I(ep)].bufpq_target_size) { | 
|  | free(free_on_destroy); | 
|  | return -1; | 
|  | } | 
|  | dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; | 
|  | } | 
|  |  | 
|  | bufp = g_new(struct buf_packet, 1); | 
|  | bufp->data   = data; | 
|  | bufp->len    = len; | 
|  | bufp->offset = 0; | 
|  | bufp->status = status; | 
|  | bufp->free_on_destroy = free_on_destroy; | 
|  | QTAILQ_INSERT_TAIL(&dev->endpoint[EP2I(ep)].bufpq, bufp, next); | 
|  | dev->endpoint[EP2I(ep)].bufpq_size++; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void bufp_free(USBRedirDevice *dev, struct buf_packet *bufp, | 
|  | uint8_t ep) | 
|  | { | 
|  | QTAILQ_REMOVE(&dev->endpoint[EP2I(ep)].bufpq, bufp, next); | 
|  | dev->endpoint[EP2I(ep)].bufpq_size--; | 
|  | free(bufp->free_on_destroy); | 
|  | g_free(bufp); | 
|  | } | 
|  |  | 
|  | static void usbredir_free_bufpq(USBRedirDevice *dev, uint8_t ep) | 
|  | { | 
|  | struct buf_packet *buf, *buf_next; | 
|  |  | 
|  | QTAILQ_FOREACH_SAFE(buf, &dev->endpoint[EP2I(ep)].bufpq, next, buf_next) { | 
|  | bufp_free(dev, buf, ep); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * USBDevice callbacks | 
|  | */ | 
|  |  | 
|  | static void usbredir_handle_reset(USBDevice *udev) | 
|  | { | 
|  | USBRedirDevice *dev = USB_REDIRECT(udev); | 
|  |  | 
|  | DPRINTF("reset device\n"); | 
|  | usbredirparser_send_reset(dev->parser); | 
|  | usbredirparser_do_write(dev->parser); | 
|  | } | 
|  |  | 
|  | static void usbredir_handle_iso_data(USBRedirDevice *dev, USBPacket *p, | 
|  | uint8_t ep) | 
|  | { | 
|  | int status, len; | 
|  | if (!dev->endpoint[EP2I(ep)].iso_started && | 
|  | !dev->endpoint[EP2I(ep)].iso_error) { | 
|  | struct usb_redir_start_iso_stream_header start_iso = { | 
|  | .endpoint = ep, | 
|  | }; | 
|  | int pkts_per_sec; | 
|  |  | 
|  | if (dev->dev.speed == USB_SPEED_HIGH) { | 
|  | pkts_per_sec = 8000 / dev->endpoint[EP2I(ep)].interval; | 
|  | } else { | 
|  | pkts_per_sec = 1000 / dev->endpoint[EP2I(ep)].interval; | 
|  | } | 
|  | /* Testing has shown that we need circa 60 ms buffer */ | 
|  | dev->endpoint[EP2I(ep)].bufpq_target_size = (pkts_per_sec * 60) / 1000; | 
|  |  | 
|  | /* Aim for approx 100 interrupts / second on the client to | 
|  | balance latency and interrupt load */ | 
|  | start_iso.pkts_per_urb = pkts_per_sec / 100; | 
|  | if (start_iso.pkts_per_urb < 1) { | 
|  | start_iso.pkts_per_urb = 1; | 
|  | } else if (start_iso.pkts_per_urb > 32) { | 
|  | start_iso.pkts_per_urb = 32; | 
|  | } | 
|  |  | 
|  | start_iso.no_urbs = DIV_ROUND_UP( | 
|  | dev->endpoint[EP2I(ep)].bufpq_target_size, | 
|  | start_iso.pkts_per_urb); | 
|  | /* Output endpoints pre-fill only 1/2 of the packets, keeping the rest | 
|  | as overflow buffer. Also see the usbredir protocol documentation */ | 
|  | if (!(ep & USB_DIR_IN)) { | 
|  | start_iso.no_urbs *= 2; | 
|  | } | 
|  | if (start_iso.no_urbs > 16) { | 
|  | start_iso.no_urbs = 16; | 
|  | } | 
|  |  | 
|  | /* No id, we look at the ep when receiving a status back */ | 
|  | usbredirparser_send_start_iso_stream(dev->parser, 0, &start_iso); | 
|  | usbredirparser_do_write(dev->parser); | 
|  | DPRINTF("iso stream started pkts/sec %d pkts/urb %d urbs %d ep %02X\n", | 
|  | pkts_per_sec, start_iso.pkts_per_urb, start_iso.no_urbs, ep); | 
|  | dev->endpoint[EP2I(ep)].iso_started = 1; | 
|  | dev->endpoint[EP2I(ep)].bufpq_prefilled = 0; | 
|  | dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; | 
|  | } | 
|  |  | 
|  | if (ep & USB_DIR_IN) { | 
|  | struct buf_packet *isop; | 
|  |  | 
|  | if (dev->endpoint[EP2I(ep)].iso_started && | 
|  | !dev->endpoint[EP2I(ep)].bufpq_prefilled) { | 
|  | if (dev->endpoint[EP2I(ep)].bufpq_size < | 
|  | dev->endpoint[EP2I(ep)].bufpq_target_size) { | 
|  | return; | 
|  | } | 
|  | dev->endpoint[EP2I(ep)].bufpq_prefilled = 1; | 
|  | } | 
|  |  | 
|  | isop = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq); | 
|  | if (isop == NULL) { | 
|  | DPRINTF("iso-token-in ep %02X, no isop, iso_error: %d\n", | 
|  | ep, dev->endpoint[EP2I(ep)].iso_error); | 
|  | /* Re-fill the buffer */ | 
|  | dev->endpoint[EP2I(ep)].bufpq_prefilled = 0; | 
|  | /* Check iso_error for stream errors, otherwise its an underrun */ | 
|  | status = dev->endpoint[EP2I(ep)].iso_error; | 
|  | dev->endpoint[EP2I(ep)].iso_error = 0; | 
|  | p->status = status ? USB_RET_IOERROR : USB_RET_SUCCESS; | 
|  | return; | 
|  | } | 
|  | DPRINTF2("iso-token-in ep %02X status %d len %d queue-size: %d\n", ep, | 
|  | isop->status, isop->len, dev->endpoint[EP2I(ep)].bufpq_size); | 
|  |  | 
|  | status = isop->status; | 
|  | len = isop->len; | 
|  | if (len > p->iov.size) { | 
|  | ERROR("received iso data is larger then packet ep %02X (%d > %d)\n", | 
|  | ep, len, (int)p->iov.size); | 
|  | len = p->iov.size; | 
|  | status = usb_redir_babble; | 
|  | } | 
|  | usb_packet_copy(p, isop->data, len); | 
|  | bufp_free(dev, isop, ep); | 
|  | usbredir_handle_status(dev, p, status); | 
|  | } else { | 
|  | /* If the stream was not started because of a pending error don't | 
|  | send the packet to the usb-host */ | 
|  | if (dev->endpoint[EP2I(ep)].iso_started) { | 
|  | struct usb_redir_iso_packet_header iso_packet = { | 
|  | .endpoint = ep, | 
|  | .length = p->iov.size | 
|  | }; | 
|  | g_autofree uint8_t *buf = g_malloc(p->iov.size); | 
|  | /* No id, we look at the ep when receiving a status back */ | 
|  | usb_packet_copy(p, buf, p->iov.size); | 
|  | usbredirparser_send_iso_packet(dev->parser, 0, &iso_packet, | 
|  | buf, p->iov.size); | 
|  | usbredirparser_do_write(dev->parser); | 
|  | } | 
|  | status = dev->endpoint[EP2I(ep)].iso_error; | 
|  | dev->endpoint[EP2I(ep)].iso_error = 0; | 
|  | DPRINTF2("iso-token-out ep %02X status %d len %zd\n", ep, status, | 
|  | p->iov.size); | 
|  | usbredir_handle_status(dev, p, status); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_stop_iso_stream(USBRedirDevice *dev, uint8_t ep) | 
|  | { | 
|  | struct usb_redir_stop_iso_stream_header stop_iso_stream = { | 
|  | .endpoint = ep | 
|  | }; | 
|  | if (dev->endpoint[EP2I(ep)].iso_started) { | 
|  | usbredirparser_send_stop_iso_stream(dev->parser, 0, &stop_iso_stream); | 
|  | DPRINTF("iso stream stopped ep %02X\n", ep); | 
|  | dev->endpoint[EP2I(ep)].iso_started = 0; | 
|  | } | 
|  | dev->endpoint[EP2I(ep)].iso_error = 0; | 
|  | usbredir_free_bufpq(dev, ep); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The usb-host may poll the endpoint faster then our guest, resulting in lots | 
|  | * of smaller bulkp-s. The below buffered_bulk_in_complete* functions combine | 
|  | * data from multiple bulkp-s into a single packet, avoiding bufpq overflows. | 
|  | */ | 
|  | static void usbredir_buffered_bulk_add_data_to_packet(USBRedirDevice *dev, | 
|  | struct buf_packet *bulkp, int count, USBPacket *p, uint8_t ep) | 
|  | { | 
|  | usb_packet_copy(p, bulkp->data + bulkp->offset, count); | 
|  | bulkp->offset += count; | 
|  | if (bulkp->offset == bulkp->len) { | 
|  | /* Store status in the last packet with data from this bulkp */ | 
|  | usbredir_handle_status(dev, p, bulkp->status); | 
|  | bufp_free(dev, bulkp, ep); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_buffered_bulk_in_complete_raw(USBRedirDevice *dev, | 
|  | USBPacket *p, uint8_t ep) | 
|  | { | 
|  | struct buf_packet *bulkp; | 
|  | int count; | 
|  |  | 
|  | while ((bulkp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq)) && | 
|  | p->actual_length < p->iov.size && p->status == USB_RET_SUCCESS) { | 
|  | count = bulkp->len - bulkp->offset; | 
|  | if (count > (p->iov.size - p->actual_length)) { | 
|  | count = p->iov.size - p->actual_length; | 
|  | } | 
|  | usbredir_buffered_bulk_add_data_to_packet(dev, bulkp, count, p, ep); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_buffered_bulk_in_complete_ftdi(USBRedirDevice *dev, | 
|  | USBPacket *p, uint8_t ep) | 
|  | { | 
|  | const int maxp = dev->endpoint[EP2I(ep)].max_packet_size; | 
|  | uint8_t header[2] = { 0, 0 }; | 
|  | struct buf_packet *bulkp; | 
|  | int count; | 
|  |  | 
|  | while ((bulkp = QTAILQ_FIRST(&dev->endpoint[EP2I(ep)].bufpq)) && | 
|  | p->actual_length < p->iov.size && p->status == USB_RET_SUCCESS) { | 
|  | if (bulkp->len < 2) { | 
|  | WARNING("malformed ftdi bulk in packet\n"); | 
|  | bufp_free(dev, bulkp, ep); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | if ((p->actual_length % maxp) == 0) { | 
|  | usb_packet_copy(p, bulkp->data, 2); | 
|  | memcpy(header, bulkp->data, 2); | 
|  | } else { | 
|  | if (bulkp->data[0] != header[0] || bulkp->data[1] != header[1]) { | 
|  | break; /* Different header, add to next packet */ | 
|  | } | 
|  | } | 
|  |  | 
|  | if (bulkp->offset == 0) { | 
|  | bulkp->offset = 2; /* Skip header */ | 
|  | } | 
|  | count = bulkp->len - bulkp->offset; | 
|  | /* Must repeat the header at maxp interval */ | 
|  | if (count > (maxp - (p->actual_length % maxp))) { | 
|  | count = maxp - (p->actual_length % maxp); | 
|  | } | 
|  | usbredir_buffered_bulk_add_data_to_packet(dev, bulkp, count, p, ep); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_buffered_bulk_in_complete(USBRedirDevice *dev, | 
|  | USBPacket *p, uint8_t ep) | 
|  | { | 
|  | p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */ | 
|  | dev->buffered_bulk_in_complete(dev, p, ep); | 
|  | DPRINTF("bulk-token-in ep %02X status %d len %d id %"PRIu64"\n", | 
|  | ep, p->status, p->actual_length, p->id); | 
|  | } | 
|  |  | 
|  | static void usbredir_handle_buffered_bulk_in_data(USBRedirDevice *dev, | 
|  | USBPacket *p, uint8_t ep) | 
|  | { | 
|  | /* Input bulk endpoint, buffered packet input */ | 
|  | if (!dev->endpoint[EP2I(ep)].bulk_receiving_started) { | 
|  | int bpt; | 
|  | struct usb_redir_start_bulk_receiving_header start = { | 
|  | .endpoint = ep, | 
|  | .stream_id = 0, | 
|  | .no_transfers = 5, | 
|  | }; | 
|  | /* Round bytes_per_transfer up to a multiple of max_packet_size */ | 
|  | bpt = 512 + dev->endpoint[EP2I(ep)].max_packet_size - 1; | 
|  | bpt /= dev->endpoint[EP2I(ep)].max_packet_size; | 
|  | bpt *= dev->endpoint[EP2I(ep)].max_packet_size; | 
|  | start.bytes_per_transfer = bpt; | 
|  | /* No id, we look at the ep when receiving a status back */ | 
|  | usbredirparser_send_start_bulk_receiving(dev->parser, 0, &start); | 
|  | usbredirparser_do_write(dev->parser); | 
|  | DPRINTF("bulk receiving started bytes/transfer %u count %d ep %02X\n", | 
|  | start.bytes_per_transfer, start.no_transfers, ep); | 
|  | dev->endpoint[EP2I(ep)].bulk_receiving_started = 1; | 
|  | /* We don't really want to drop bulk packets ever, but | 
|  | having some upper limit to how much we buffer is good. */ | 
|  | dev->endpoint[EP2I(ep)].bufpq_target_size = 5000; | 
|  | dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; | 
|  | } | 
|  |  | 
|  | if (QTAILQ_EMPTY(&dev->endpoint[EP2I(ep)].bufpq)) { | 
|  | DPRINTF("bulk-token-in ep %02X, no bulkp\n", ep); | 
|  | assert(dev->endpoint[EP2I(ep)].pending_async_packet == NULL); | 
|  | dev->endpoint[EP2I(ep)].pending_async_packet = p; | 
|  | p->status = USB_RET_ASYNC; | 
|  | return; | 
|  | } | 
|  | usbredir_buffered_bulk_in_complete(dev, p, ep); | 
|  | } | 
|  |  | 
|  | static void usbredir_stop_bulk_receiving(USBRedirDevice *dev, uint8_t ep) | 
|  | { | 
|  | struct usb_redir_stop_bulk_receiving_header stop_bulk = { | 
|  | .endpoint = ep, | 
|  | .stream_id = 0, | 
|  | }; | 
|  | if (dev->endpoint[EP2I(ep)].bulk_receiving_started) { | 
|  | usbredirparser_send_stop_bulk_receiving(dev->parser, 0, &stop_bulk); | 
|  | DPRINTF("bulk receiving stopped ep %02X\n", ep); | 
|  | dev->endpoint[EP2I(ep)].bulk_receiving_started = 0; | 
|  | } | 
|  | usbredir_free_bufpq(dev, ep); | 
|  | } | 
|  |  | 
|  | static void usbredir_handle_bulk_data(USBRedirDevice *dev, USBPacket *p, | 
|  | uint8_t ep) | 
|  | { | 
|  | struct usb_redir_bulk_packet_header bulk_packet; | 
|  | size_t size = usb_packet_size(p); | 
|  | const int maxp = dev->endpoint[EP2I(ep)].max_packet_size; | 
|  |  | 
|  | if (usbredir_already_in_flight(dev, p->id)) { | 
|  | p->status = USB_RET_ASYNC; | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (dev->endpoint[EP2I(ep)].bulk_receiving_enabled) { | 
|  | if (size != 0 && (size % maxp) == 0) { | 
|  | usbredir_handle_buffered_bulk_in_data(dev, p, ep); | 
|  | return; | 
|  | } | 
|  | WARNING("bulk recv invalid size %zd ep %02x, disabling\n", size, ep); | 
|  | assert(dev->endpoint[EP2I(ep)].pending_async_packet == NULL); | 
|  | usbredir_stop_bulk_receiving(dev, ep); | 
|  | dev->endpoint[EP2I(ep)].bulk_receiving_enabled = 0; | 
|  | } | 
|  |  | 
|  | DPRINTF("bulk-out ep %02X stream %u len %zd id %"PRIu64"\n", | 
|  | ep, p->stream, size, p->id); | 
|  |  | 
|  | bulk_packet.endpoint  = ep; | 
|  | bulk_packet.length    = size; | 
|  | bulk_packet.stream_id = p->stream; | 
|  | bulk_packet.length_high = size >> 16; | 
|  | assert(bulk_packet.length_high == 0 || | 
|  | usbredirparser_peer_has_cap(dev->parser, | 
|  | usb_redir_cap_32bits_bulk_length)); | 
|  |  | 
|  | if (ep & USB_DIR_IN || size == 0) { | 
|  | usbredirparser_send_bulk_packet(dev->parser, p->id, | 
|  | &bulk_packet, NULL, 0); | 
|  | } else { | 
|  | g_autofree uint8_t *buf = g_malloc(size); | 
|  | usb_packet_copy(p, buf, size); | 
|  | usbredir_log_data(dev, "bulk data out:", buf, size); | 
|  | usbredirparser_send_bulk_packet(dev->parser, p->id, | 
|  | &bulk_packet, buf, size); | 
|  | } | 
|  | usbredirparser_do_write(dev->parser); | 
|  | p->status = USB_RET_ASYNC; | 
|  | } | 
|  |  | 
|  | static void usbredir_handle_interrupt_in_data(USBRedirDevice *dev, | 
|  | USBPacket *p, uint8_t ep) | 
|  | { | 
|  | /* Input interrupt endpoint, buffered packet input */ | 
|  | struct buf_packet *intp, *intp_to_free; | 
|  | int status, len, sum; | 
|  |  | 
|  | if (!dev->endpoint[EP2I(ep)].interrupt_started && | 
|  | !dev->endpoint[EP2I(ep)].interrupt_error) { | 
|  | struct usb_redir_start_interrupt_receiving_header start_int = { | 
|  | .endpoint = ep, | 
|  | }; | 
|  | /* No id, we look at the ep when receiving a status back */ | 
|  | usbredirparser_send_start_interrupt_receiving(dev->parser, 0, | 
|  | &start_int); | 
|  | usbredirparser_do_write(dev->parser); | 
|  | DPRINTF("interrupt recv started ep %02X\n", ep); | 
|  | dev->endpoint[EP2I(ep)].interrupt_started = 1; | 
|  | /* We don't really want to drop interrupt packets ever, but | 
|  | having some upper limit to how much we buffer is good. */ | 
|  | dev->endpoint[EP2I(ep)].bufpq_target_size = 1000; | 
|  | dev->endpoint[EP2I(ep)].bufpq_dropping_packets = 0; | 
|  | } | 
|  |  | 
|  | /* check for completed interrupt message (with all fragments) */ | 
|  | sum = 0; | 
|  | QTAILQ_FOREACH(intp, &dev->endpoint[EP2I(ep)].bufpq, next) { | 
|  | sum += intp->len; | 
|  | if (intp->len < dev->endpoint[EP2I(ep)].max_packet_size || | 
|  | sum >= p->iov.size) | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (intp == NULL) { | 
|  | DPRINTF2("interrupt-token-in ep %02X, no intp, buffered %d\n", ep, sum); | 
|  | /* Check interrupt_error for stream errors */ | 
|  | status = dev->endpoint[EP2I(ep)].interrupt_error; | 
|  | dev->endpoint[EP2I(ep)].interrupt_error = 0; | 
|  | if (status) { | 
|  | usbredir_handle_status(dev, p, status); | 
|  | } else { | 
|  | p->status = USB_RET_NAK; | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* copy of completed interrupt message */ | 
|  | sum = 0; | 
|  | status = usb_redir_success; | 
|  | intp_to_free = NULL; | 
|  | QTAILQ_FOREACH(intp, &dev->endpoint[EP2I(ep)].bufpq, next) { | 
|  | if (intp_to_free) { | 
|  | bufp_free(dev, intp_to_free, ep); | 
|  | } | 
|  | DPRINTF("interrupt-token-in ep %02X fragment status %d len %d\n", ep, | 
|  | intp->status, intp->len); | 
|  |  | 
|  | sum += intp->len; | 
|  | len = intp->len; | 
|  | if (status == usb_redir_success) { | 
|  | status = intp->status; | 
|  | } | 
|  | if (sum > p->iov.size) { | 
|  | ERROR("received int data is larger then packet ep %02X\n", ep); | 
|  | len -= (sum - p->iov.size); | 
|  | sum = p->iov.size; | 
|  | status = usb_redir_babble; | 
|  | } | 
|  |  | 
|  | usb_packet_copy(p, intp->data, len); | 
|  |  | 
|  | intp_to_free = intp; | 
|  | if (intp->len < dev->endpoint[EP2I(ep)].max_packet_size || | 
|  | sum >= p->iov.size) | 
|  | break; | 
|  | } | 
|  | if (intp_to_free) { | 
|  | bufp_free(dev, intp_to_free, ep); | 
|  | } | 
|  | DPRINTF("interrupt-token-in ep %02X summary status %d len %d\n", ep, | 
|  | status, sum); | 
|  | usbredir_handle_status(dev, p, status); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Handle interrupt out data, the usbredir protocol expects us to do this | 
|  | * async, so that it can report back a completion status. But guests will | 
|  | * expect immediate completion for an interrupt endpoint, and handling this | 
|  | * async causes migration issues. So we report success directly, counting | 
|  | * on the fact that output interrupt packets normally always succeed. | 
|  | */ | 
|  | static void usbredir_handle_interrupt_out_data(USBRedirDevice *dev, | 
|  | USBPacket *p, uint8_t ep) | 
|  | { | 
|  | struct usb_redir_interrupt_packet_header interrupt_packet; | 
|  | g_autofree uint8_t *buf = g_malloc(p->iov.size); | 
|  |  | 
|  | DPRINTF("interrupt-out ep %02X len %zd id %"PRIu64"\n", ep, | 
|  | p->iov.size, p->id); | 
|  |  | 
|  | interrupt_packet.endpoint  = ep; | 
|  | interrupt_packet.length    = p->iov.size; | 
|  |  | 
|  | usb_packet_copy(p, buf, p->iov.size); | 
|  | usbredir_log_data(dev, "interrupt data out:", buf, p->iov.size); | 
|  | usbredirparser_send_interrupt_packet(dev->parser, p->id, | 
|  | &interrupt_packet, buf, p->iov.size); | 
|  | usbredirparser_do_write(dev->parser); | 
|  | } | 
|  |  | 
|  | static void usbredir_stop_interrupt_receiving(USBRedirDevice *dev, | 
|  | uint8_t ep) | 
|  | { | 
|  | struct usb_redir_stop_interrupt_receiving_header stop_interrupt_recv = { | 
|  | .endpoint = ep | 
|  | }; | 
|  | if (dev->endpoint[EP2I(ep)].interrupt_started) { | 
|  | usbredirparser_send_stop_interrupt_receiving(dev->parser, 0, | 
|  | &stop_interrupt_recv); | 
|  | DPRINTF("interrupt recv stopped ep %02X\n", ep); | 
|  | dev->endpoint[EP2I(ep)].interrupt_started = 0; | 
|  | } | 
|  | dev->endpoint[EP2I(ep)].interrupt_error = 0; | 
|  | usbredir_free_bufpq(dev, ep); | 
|  | } | 
|  |  | 
|  | static void usbredir_handle_data(USBDevice *udev, USBPacket *p) | 
|  | { | 
|  | USBRedirDevice *dev = USB_REDIRECT(udev); | 
|  | uint8_t ep; | 
|  |  | 
|  | ep = p->ep->nr; | 
|  | if (p->pid == USB_TOKEN_IN) { | 
|  | ep |= USB_DIR_IN; | 
|  | } | 
|  |  | 
|  | switch (dev->endpoint[EP2I(ep)].type) { | 
|  | case USB_ENDPOINT_XFER_CONTROL: | 
|  | ERROR("handle_data called for control transfer on ep %02X\n", ep); | 
|  | p->status = USB_RET_NAK; | 
|  | break; | 
|  | case USB_ENDPOINT_XFER_BULK: | 
|  | if (p->state == USB_PACKET_SETUP && p->pid == USB_TOKEN_IN && | 
|  | p->ep->pipeline) { | 
|  | p->status = USB_RET_ADD_TO_QUEUE; | 
|  | break; | 
|  | } | 
|  | usbredir_handle_bulk_data(dev, p, ep); | 
|  | break; | 
|  | case USB_ENDPOINT_XFER_ISOC: | 
|  | usbredir_handle_iso_data(dev, p, ep); | 
|  | break; | 
|  | case USB_ENDPOINT_XFER_INT: | 
|  | if (ep & USB_DIR_IN) { | 
|  | usbredir_handle_interrupt_in_data(dev, p, ep); | 
|  | } else { | 
|  | usbredir_handle_interrupt_out_data(dev, p, ep); | 
|  | } | 
|  | break; | 
|  | default: | 
|  | ERROR("handle_data ep %02X has unknown type %d\n", ep, | 
|  | dev->endpoint[EP2I(ep)].type); | 
|  | p->status = USB_RET_NAK; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_flush_ep_queue(USBDevice *dev, USBEndpoint *ep) | 
|  | { | 
|  | if (ep->pid == USB_TOKEN_IN && ep->pipeline) { | 
|  | usb_ep_combine_input_packets(ep); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_stop_ep(USBRedirDevice *dev, int i) | 
|  | { | 
|  | uint8_t ep = I2EP(i); | 
|  |  | 
|  | switch (dev->endpoint[i].type) { | 
|  | case USB_ENDPOINT_XFER_BULK: | 
|  | if (ep & USB_DIR_IN) { | 
|  | usbredir_stop_bulk_receiving(dev, ep); | 
|  | } | 
|  | break; | 
|  | case USB_ENDPOINT_XFER_ISOC: | 
|  | usbredir_stop_iso_stream(dev, ep); | 
|  | break; | 
|  | case USB_ENDPOINT_XFER_INT: | 
|  | if (ep & USB_DIR_IN) { | 
|  | usbredir_stop_interrupt_receiving(dev, ep); | 
|  | } | 
|  | break; | 
|  | } | 
|  | usbredir_free_bufpq(dev, ep); | 
|  | } | 
|  |  | 
|  | static void usbredir_ep_stopped(USBDevice *udev, USBEndpoint *uep) | 
|  | { | 
|  | USBRedirDevice *dev = USB_REDIRECT(udev); | 
|  |  | 
|  | usbredir_stop_ep(dev, USBEP2I(uep)); | 
|  | usbredirparser_do_write(dev->parser); | 
|  | } | 
|  |  | 
|  | static void usbredir_set_config(USBRedirDevice *dev, USBPacket *p, | 
|  | int config) | 
|  | { | 
|  | struct usb_redir_set_configuration_header set_config; | 
|  | int i; | 
|  |  | 
|  | DPRINTF("set config %d id %"PRIu64"\n", config, p->id); | 
|  |  | 
|  | for (i = 0; i < MAX_ENDPOINTS; i++) { | 
|  | usbredir_stop_ep(dev, i); | 
|  | } | 
|  |  | 
|  | set_config.configuration = config; | 
|  | usbredirparser_send_set_configuration(dev->parser, p->id, &set_config); | 
|  | usbredirparser_do_write(dev->parser); | 
|  | p->status = USB_RET_ASYNC; | 
|  | } | 
|  |  | 
|  | static void usbredir_get_config(USBRedirDevice *dev, USBPacket *p) | 
|  | { | 
|  | DPRINTF("get config id %"PRIu64"\n", p->id); | 
|  |  | 
|  | usbredirparser_send_get_configuration(dev->parser, p->id); | 
|  | usbredirparser_do_write(dev->parser); | 
|  | p->status = USB_RET_ASYNC; | 
|  | } | 
|  |  | 
|  | static void usbredir_set_interface(USBRedirDevice *dev, USBPacket *p, | 
|  | int interface, int alt) | 
|  | { | 
|  | struct usb_redir_set_alt_setting_header set_alt; | 
|  | int i; | 
|  |  | 
|  | DPRINTF("set interface %d alt %d id %"PRIu64"\n", interface, alt, p->id); | 
|  |  | 
|  | for (i = 0; i < MAX_ENDPOINTS; i++) { | 
|  | if (dev->endpoint[i].interface == interface) { | 
|  | usbredir_stop_ep(dev, i); | 
|  | } | 
|  | } | 
|  |  | 
|  | set_alt.interface = interface; | 
|  | set_alt.alt = alt; | 
|  | usbredirparser_send_set_alt_setting(dev->parser, p->id, &set_alt); | 
|  | usbredirparser_do_write(dev->parser); | 
|  | p->status = USB_RET_ASYNC; | 
|  | } | 
|  |  | 
|  | static void usbredir_get_interface(USBRedirDevice *dev, USBPacket *p, | 
|  | int interface) | 
|  | { | 
|  | struct usb_redir_get_alt_setting_header get_alt; | 
|  |  | 
|  | DPRINTF("get interface %d id %"PRIu64"\n", interface, p->id); | 
|  |  | 
|  | get_alt.interface = interface; | 
|  | usbredirparser_send_get_alt_setting(dev->parser, p->id, &get_alt); | 
|  | usbredirparser_do_write(dev->parser); | 
|  | p->status = USB_RET_ASYNC; | 
|  | } | 
|  |  | 
|  | static void usbredir_handle_control(USBDevice *udev, USBPacket *p, | 
|  | int request, int value, int index, int length, uint8_t *data) | 
|  | { | 
|  | USBRedirDevice *dev = USB_REDIRECT(udev); | 
|  | struct usb_redir_control_packet_header control_packet; | 
|  |  | 
|  | if (usbredir_already_in_flight(dev, p->id)) { | 
|  | p->status = USB_RET_ASYNC; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Special cases for certain standard device requests */ | 
|  | switch (request) { | 
|  | case DeviceOutRequest | USB_REQ_SET_ADDRESS: | 
|  | DPRINTF("set address %d\n", value); | 
|  | dev->dev.addr = value; | 
|  | return; | 
|  | case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: | 
|  | usbredir_set_config(dev, p, value & 0xff); | 
|  | return; | 
|  | case DeviceRequest | USB_REQ_GET_CONFIGURATION: | 
|  | usbredir_get_config(dev, p); | 
|  | return; | 
|  | case InterfaceOutRequest | USB_REQ_SET_INTERFACE: | 
|  | usbredir_set_interface(dev, p, index, value); | 
|  | return; | 
|  | case InterfaceRequest | USB_REQ_GET_INTERFACE: | 
|  | usbredir_get_interface(dev, p, index); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Normal ctrl requests, note request is (bRequestType << 8) | bRequest */ | 
|  | DPRINTF( | 
|  | "ctrl-out type 0x%x req 0x%x val 0x%x index %d len %d id %"PRIu64"\n", | 
|  | request >> 8, request & 0xff, value, index, length, p->id); | 
|  |  | 
|  | control_packet.request     = request & 0xFF; | 
|  | control_packet.requesttype = request >> 8; | 
|  | control_packet.endpoint    = control_packet.requesttype & USB_DIR_IN; | 
|  | control_packet.value       = value; | 
|  | control_packet.index       = index; | 
|  | control_packet.length      = length; | 
|  |  | 
|  | if (control_packet.requesttype & USB_DIR_IN) { | 
|  | usbredirparser_send_control_packet(dev->parser, p->id, | 
|  | &control_packet, NULL, 0); | 
|  | } else { | 
|  | usbredir_log_data(dev, "ctrl data out:", data, length); | 
|  | usbredirparser_send_control_packet(dev->parser, p->id, | 
|  | &control_packet, data, length); | 
|  | } | 
|  | usbredirparser_do_write(dev->parser); | 
|  | p->status = USB_RET_ASYNC; | 
|  | } | 
|  |  | 
|  | static int usbredir_alloc_streams(USBDevice *udev, USBEndpoint **eps, | 
|  | int nr_eps, int streams) | 
|  | { | 
|  | USBRedirDevice *dev = USB_REDIRECT(udev); | 
|  | #if USBREDIR_VERSION >= 0x000700 | 
|  | struct usb_redir_alloc_bulk_streams_header alloc_streams; | 
|  | int i; | 
|  |  | 
|  | if (!usbredirparser_peer_has_cap(dev->parser, | 
|  | usb_redir_cap_bulk_streams)) { | 
|  | ERROR("peer does not support streams\n"); | 
|  | goto reject; | 
|  | } | 
|  |  | 
|  | if (streams == 0) { | 
|  | ERROR("request to allocate 0 streams\n"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | alloc_streams.no_streams = streams; | 
|  | alloc_streams.endpoints = 0; | 
|  | for (i = 0; i < nr_eps; i++) { | 
|  | alloc_streams.endpoints |= 1 << USBEP2I(eps[i]); | 
|  | } | 
|  | usbredirparser_send_alloc_bulk_streams(dev->parser, 0, &alloc_streams); | 
|  | usbredirparser_do_write(dev->parser); | 
|  |  | 
|  | return 0; | 
|  | #else | 
|  | ERROR("usbredir_alloc_streams not implemented\n"); | 
|  | goto reject; | 
|  | #endif | 
|  | reject: | 
|  | ERROR("streams are not available, disconnecting\n"); | 
|  | qemu_bh_schedule(dev->device_reject_bh); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static void usbredir_free_streams(USBDevice *udev, USBEndpoint **eps, | 
|  | int nr_eps) | 
|  | { | 
|  | #if USBREDIR_VERSION >= 0x000700 | 
|  | USBRedirDevice *dev = USB_REDIRECT(udev); | 
|  | struct usb_redir_free_bulk_streams_header free_streams; | 
|  | int i; | 
|  |  | 
|  | if (!usbredirparser_peer_has_cap(dev->parser, | 
|  | usb_redir_cap_bulk_streams)) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | free_streams.endpoints = 0; | 
|  | for (i = 0; i < nr_eps; i++) { | 
|  | free_streams.endpoints |= 1 << USBEP2I(eps[i]); | 
|  | } | 
|  | usbredirparser_send_free_bulk_streams(dev->parser, 0, &free_streams); | 
|  | usbredirparser_do_write(dev->parser); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Close events can be triggered by usbredirparser_do_write which gets called | 
|  | * from within the USBDevice data / control packet callbacks and doing a | 
|  | * usb_detach from within these callbacks is not a good idea. | 
|  | * | 
|  | * So we use a bh handler to take care of close events. | 
|  | */ | 
|  | static void usbredir_chardev_close_bh(void *opaque) | 
|  | { | 
|  | USBRedirDevice *dev = opaque; | 
|  |  | 
|  | qemu_bh_cancel(dev->device_reject_bh); | 
|  | usbredir_device_disconnect(dev); | 
|  |  | 
|  | if (dev->parser) { | 
|  | DPRINTF("destroying usbredirparser\n"); | 
|  | usbredirparser_destroy(dev->parser); | 
|  | dev->parser = NULL; | 
|  | } | 
|  | if (dev->watch) { | 
|  | g_source_remove(dev->watch); | 
|  | dev->watch = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_create_parser(USBRedirDevice *dev) | 
|  | { | 
|  | uint32_t caps[USB_REDIR_CAPS_SIZE] = { 0, }; | 
|  | int flags = 0; | 
|  |  | 
|  | DPRINTF("creating usbredirparser\n"); | 
|  |  | 
|  | dev->parser = usbredirparser_create(); | 
|  | if (!dev->parser) { | 
|  | error_report("usbredirparser_create() failed"); | 
|  | exit(1); | 
|  | } | 
|  | dev->parser->priv = dev; | 
|  | dev->parser->log_func = usbredir_log; | 
|  | dev->parser->read_func = usbredir_read; | 
|  | dev->parser->write_func = usbredir_write; | 
|  | dev->parser->hello_func = usbredir_hello; | 
|  | dev->parser->device_connect_func = usbredir_device_connect; | 
|  | dev->parser->device_disconnect_func = usbredir_device_disconnect; | 
|  | dev->parser->interface_info_func = usbredir_interface_info; | 
|  | dev->parser->ep_info_func = usbredir_ep_info; | 
|  | dev->parser->configuration_status_func = usbredir_configuration_status; | 
|  | dev->parser->alt_setting_status_func = usbredir_alt_setting_status; | 
|  | dev->parser->iso_stream_status_func = usbredir_iso_stream_status; | 
|  | dev->parser->interrupt_receiving_status_func = | 
|  | usbredir_interrupt_receiving_status; | 
|  | dev->parser->bulk_streams_status_func = usbredir_bulk_streams_status; | 
|  | dev->parser->bulk_receiving_status_func = usbredir_bulk_receiving_status; | 
|  | dev->parser->control_packet_func = usbredir_control_packet; | 
|  | dev->parser->bulk_packet_func = usbredir_bulk_packet; | 
|  | dev->parser->iso_packet_func = usbredir_iso_packet; | 
|  | dev->parser->interrupt_packet_func = usbredir_interrupt_packet; | 
|  | dev->parser->buffered_bulk_packet_func = usbredir_buffered_bulk_packet; | 
|  | dev->read_buf = NULL; | 
|  | dev->read_buf_size = 0; | 
|  |  | 
|  | usbredirparser_caps_set_cap(caps, usb_redir_cap_connect_device_version); | 
|  | usbredirparser_caps_set_cap(caps, usb_redir_cap_filter); | 
|  | usbredirparser_caps_set_cap(caps, usb_redir_cap_ep_info_max_packet_size); | 
|  | usbredirparser_caps_set_cap(caps, usb_redir_cap_64bits_ids); | 
|  | usbredirparser_caps_set_cap(caps, usb_redir_cap_32bits_bulk_length); | 
|  | usbredirparser_caps_set_cap(caps, usb_redir_cap_bulk_receiving); | 
|  | #if USBREDIR_VERSION >= 0x000700 | 
|  | if (dev->enable_streams) { | 
|  | usbredirparser_caps_set_cap(caps, usb_redir_cap_bulk_streams); | 
|  | } | 
|  | #endif | 
|  |  | 
|  | if (runstate_check(RUN_STATE_INMIGRATE)) { | 
|  | flags |= usbredirparser_fl_no_hello; | 
|  | } | 
|  | usbredirparser_init(dev->parser, VERSION, caps, USB_REDIR_CAPS_SIZE, | 
|  | flags); | 
|  | usbredirparser_do_write(dev->parser); | 
|  | } | 
|  |  | 
|  | static void usbredir_reject_device(USBRedirDevice *dev) | 
|  | { | 
|  | usbredir_device_disconnect(dev); | 
|  | if (usbredirparser_peer_has_cap(dev->parser, usb_redir_cap_filter)) { | 
|  | usbredirparser_send_filter_reject(dev->parser); | 
|  | usbredirparser_do_write(dev->parser); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We may need to reject the device when the hcd calls alloc_streams, doing | 
|  | * an usb_detach from within a hcd call is not a good idea, hence this bh. | 
|  | */ | 
|  | static void usbredir_device_reject_bh(void *opaque) | 
|  | { | 
|  | USBRedirDevice *dev = opaque; | 
|  |  | 
|  | usbredir_reject_device(dev); | 
|  | } | 
|  |  | 
|  | static void usbredir_do_attach(void *opaque) | 
|  | { | 
|  | USBRedirDevice *dev = opaque; | 
|  | Error *local_err = NULL; | 
|  |  | 
|  | /* In order to work properly with XHCI controllers we need these caps */ | 
|  | if ((dev->dev.port->speedmask & USB_SPEED_MASK_SUPER) && !( | 
|  | usbredirparser_peer_has_cap(dev->parser, | 
|  | usb_redir_cap_ep_info_max_packet_size) && | 
|  | usbredirparser_peer_has_cap(dev->parser, | 
|  | usb_redir_cap_32bits_bulk_length) && | 
|  | usbredirparser_peer_has_cap(dev->parser, | 
|  | usb_redir_cap_64bits_ids))) { | 
|  | ERROR("usb-redir-host lacks capabilities needed for use with XHCI\n"); | 
|  | usbredir_reject_device(dev); | 
|  | return; | 
|  | } | 
|  |  | 
|  | usb_device_attach(&dev->dev, &local_err); | 
|  | if (local_err) { | 
|  | error_report_err(local_err); | 
|  | WARNING("rejecting device due to speed mismatch\n"); | 
|  | usbredir_reject_device(dev); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * chardev callbacks | 
|  | */ | 
|  |  | 
|  | static int usbredir_chardev_can_read(void *opaque) | 
|  | { | 
|  | USBRedirDevice *dev = opaque; | 
|  |  | 
|  | if (!dev->parser) { | 
|  | WARNING("chardev_can_read called on non open chardev!\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Don't read new data from the chardev until our state is fully synced */ | 
|  | if (!runstate_check(RUN_STATE_RUNNING)) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* usbredir_parser_do_read will consume *all* data we give it */ | 
|  | return 1 * MiB; | 
|  | } | 
|  |  | 
|  | static void usbredir_chardev_read(void *opaque, const uint8_t *buf, int size) | 
|  | { | 
|  | USBRedirDevice *dev = opaque; | 
|  |  | 
|  | /* No recursion allowed! */ | 
|  | assert(dev->read_buf == NULL); | 
|  |  | 
|  | dev->read_buf = buf; | 
|  | dev->read_buf_size = size; | 
|  |  | 
|  | usbredirparser_do_read(dev->parser); | 
|  | /* Send any acks, etc. which may be queued now */ | 
|  | usbredirparser_do_write(dev->parser); | 
|  | } | 
|  |  | 
|  | static void usbredir_chardev_event(void *opaque, QEMUChrEvent event) | 
|  | { | 
|  | USBRedirDevice *dev = opaque; | 
|  |  | 
|  | switch (event) { | 
|  | case CHR_EVENT_OPENED: | 
|  | DPRINTF("chardev open\n"); | 
|  | /* Make sure any pending closes are handled (no-op if none pending) */ | 
|  | usbredir_chardev_close_bh(dev); | 
|  | qemu_bh_cancel(dev->chardev_close_bh); | 
|  | usbredir_create_parser(dev); | 
|  | break; | 
|  | case CHR_EVENT_CLOSED: | 
|  | DPRINTF("chardev close\n"); | 
|  | qemu_bh_schedule(dev->chardev_close_bh); | 
|  | break; | 
|  | case CHR_EVENT_BREAK: | 
|  | case CHR_EVENT_MUX_IN: | 
|  | case CHR_EVENT_MUX_OUT: | 
|  | /* Ignore */ | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * init + destroy | 
|  | */ | 
|  |  | 
|  | static void usbredir_vm_state_change(void *priv, bool running, RunState state) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  |  | 
|  | if (running && dev->parser != NULL) { | 
|  | usbredirparser_do_write(dev->parser); /* Flush any pending writes */ | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_init_endpoints(USBRedirDevice *dev) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | usb_ep_init(&dev->dev); | 
|  | memset(dev->endpoint, 0, sizeof(dev->endpoint)); | 
|  | for (i = 0; i < MAX_ENDPOINTS; i++) { | 
|  | dev->endpoint[i].dev = dev; | 
|  | QTAILQ_INIT(&dev->endpoint[i].bufpq); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_realize(USBDevice *udev, Error **errp) | 
|  | { | 
|  | USBRedirDevice *dev = USB_REDIRECT(udev); | 
|  | int i; | 
|  |  | 
|  | if (!qemu_chr_fe_backend_connected(&dev->cs)) { | 
|  | error_setg(errp, QERR_MISSING_PARAMETER, "chardev"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (dev->filter_str) { | 
|  | i = usbredirfilter_string_to_rules(dev->filter_str, ":", "|", | 
|  | &dev->filter_rules, | 
|  | &dev->filter_rules_count); | 
|  | if (i) { | 
|  | error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "filter", | 
|  | "a usb device filter string"); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | dev->chardev_close_bh = qemu_bh_new_guarded(usbredir_chardev_close_bh, dev, | 
|  | &DEVICE(dev)->mem_reentrancy_guard); | 
|  | dev->device_reject_bh = qemu_bh_new_guarded(usbredir_device_reject_bh, dev, | 
|  | &DEVICE(dev)->mem_reentrancy_guard); | 
|  | dev->attach_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL, usbredir_do_attach, dev); | 
|  |  | 
|  | packet_id_queue_init(&dev->cancelled, dev, "cancelled"); | 
|  | packet_id_queue_init(&dev->already_in_flight, dev, "already-in-flight"); | 
|  | usbredir_init_endpoints(dev); | 
|  |  | 
|  | /* We'll do the attach once we receive the speed from the usb-host */ | 
|  | udev->auto_attach = 0; | 
|  |  | 
|  | /* Will be cleared during setup when we find conflicts */ | 
|  | dev->compatible_speedmask = USB_SPEED_MASK_FULL | USB_SPEED_MASK_HIGH; | 
|  |  | 
|  | /* Let the backend know we are ready */ | 
|  | qemu_chr_fe_set_handlers(&dev->cs, usbredir_chardev_can_read, | 
|  | usbredir_chardev_read, usbredir_chardev_event, | 
|  | NULL, dev, NULL, true); | 
|  |  | 
|  | dev->vmstate = | 
|  | qemu_add_vm_change_state_handler(usbredir_vm_state_change, dev); | 
|  | } | 
|  |  | 
|  | static void usbredir_cleanup_device_queues(USBRedirDevice *dev) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | packet_id_queue_empty(&dev->cancelled); | 
|  | packet_id_queue_empty(&dev->already_in_flight); | 
|  | for (i = 0; i < MAX_ENDPOINTS; i++) { | 
|  | usbredir_free_bufpq(dev, I2EP(i)); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_unrealize(USBDevice *udev) | 
|  | { | 
|  | USBRedirDevice *dev = USB_REDIRECT(udev); | 
|  |  | 
|  | qemu_chr_fe_deinit(&dev->cs, true); | 
|  |  | 
|  | /* Note must be done after qemu_chr_close, as that causes a close event */ | 
|  | qemu_bh_delete(dev->chardev_close_bh); | 
|  | qemu_bh_delete(dev->device_reject_bh); | 
|  |  | 
|  | timer_free(dev->attach_timer); | 
|  |  | 
|  | usbredir_cleanup_device_queues(dev); | 
|  |  | 
|  | if (dev->parser) { | 
|  | usbredirparser_destroy(dev->parser); | 
|  | } | 
|  | if (dev->watch) { | 
|  | g_source_remove(dev->watch); | 
|  | } | 
|  |  | 
|  | free(dev->filter_rules); | 
|  | qemu_del_vm_change_state_handler(dev->vmstate); | 
|  | } | 
|  |  | 
|  | static int usbredir_check_filter(USBRedirDevice *dev) | 
|  | { | 
|  | if (dev->interface_info.interface_count == NO_INTERFACE_INFO) { | 
|  | ERROR("No interface info for device\n"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | if (dev->filter_rules) { | 
|  | if (!usbredirparser_peer_has_cap(dev->parser, | 
|  | usb_redir_cap_connect_device_version)) { | 
|  | ERROR("Device filter specified and peer does not have the " | 
|  | "connect_device_version capability\n"); | 
|  | goto error; | 
|  | } | 
|  |  | 
|  | if (usbredirfilter_check( | 
|  | dev->filter_rules, | 
|  | dev->filter_rules_count, | 
|  | dev->device_info.device_class, | 
|  | dev->device_info.device_subclass, | 
|  | dev->device_info.device_protocol, | 
|  | dev->interface_info.interface_class, | 
|  | dev->interface_info.interface_subclass, | 
|  | dev->interface_info.interface_protocol, | 
|  | dev->interface_info.interface_count, | 
|  | dev->device_info.vendor_id, | 
|  | dev->device_info.product_id, | 
|  | dev->device_info.device_version_bcd, | 
|  | 0) != 0) { | 
|  | goto error; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | error: | 
|  | usbredir_reject_device(dev); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static void usbredir_check_bulk_receiving(USBRedirDevice *dev) | 
|  | { | 
|  | int i, j, quirks; | 
|  |  | 
|  | if (!usbredirparser_peer_has_cap(dev->parser, | 
|  | usb_redir_cap_bulk_receiving)) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | for (i = EP2I(USB_DIR_IN); i < MAX_ENDPOINTS; i++) { | 
|  | dev->endpoint[i].bulk_receiving_enabled = 0; | 
|  | } | 
|  |  | 
|  | if (dev->interface_info.interface_count == NO_INTERFACE_INFO) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < dev->interface_info.interface_count; i++) { | 
|  | quirks = usb_get_quirks(dev->device_info.vendor_id, | 
|  | dev->device_info.product_id, | 
|  | dev->interface_info.interface_class[i], | 
|  | dev->interface_info.interface_subclass[i], | 
|  | dev->interface_info.interface_protocol[i]); | 
|  | if (!(quirks & USB_QUIRK_BUFFER_BULK_IN)) { | 
|  | continue; | 
|  | } | 
|  | if (quirks & USB_QUIRK_IS_FTDI) { | 
|  | dev->buffered_bulk_in_complete = | 
|  | usbredir_buffered_bulk_in_complete_ftdi; | 
|  | } else { | 
|  | dev->buffered_bulk_in_complete = | 
|  | usbredir_buffered_bulk_in_complete_raw; | 
|  | } | 
|  |  | 
|  | for (j = EP2I(USB_DIR_IN); j < MAX_ENDPOINTS; j++) { | 
|  | if (dev->endpoint[j].interface == | 
|  | dev->interface_info.interface[i] && | 
|  | dev->endpoint[j].type == USB_ENDPOINT_XFER_BULK && | 
|  | dev->endpoint[j].max_packet_size != 0) { | 
|  | dev->endpoint[j].bulk_receiving_enabled = 1; | 
|  | /* | 
|  | * With buffering pipelining is not necessary. Also packet | 
|  | * combining and bulk in buffering don't play nice together! | 
|  | */ | 
|  | I2USBEP(dev, j)->pipeline = false; | 
|  | break; /* Only buffer for the first ep of each intf */ | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * usbredirparser packet complete callbacks | 
|  | */ | 
|  |  | 
|  | static void usbredir_handle_status(USBRedirDevice *dev, USBPacket *p, | 
|  | int status) | 
|  | { | 
|  | switch (status) { | 
|  | case usb_redir_success: | 
|  | p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */ | 
|  | break; | 
|  | case usb_redir_stall: | 
|  | p->status = USB_RET_STALL; | 
|  | break; | 
|  | case usb_redir_cancelled: | 
|  | /* | 
|  | * When the usbredir-host unredirects a device, it will report a status | 
|  | * of cancelled for all pending packets, followed by a disconnect msg. | 
|  | */ | 
|  | p->status = USB_RET_IOERROR; | 
|  | break; | 
|  | case usb_redir_inval: | 
|  | WARNING("got invalid param error from usb-host?\n"); | 
|  | p->status = USB_RET_IOERROR; | 
|  | break; | 
|  | case usb_redir_babble: | 
|  | p->status = USB_RET_BABBLE; | 
|  | break; | 
|  | case usb_redir_ioerror: | 
|  | case usb_redir_timeout: | 
|  | default: | 
|  | p->status = USB_RET_IOERROR; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_hello(void *priv, struct usb_redir_hello_header *h) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  |  | 
|  | /* Try to send the filter info now that we've the usb-host's caps */ | 
|  | if (usbredirparser_peer_has_cap(dev->parser, usb_redir_cap_filter) && | 
|  | dev->filter_rules) { | 
|  | usbredirparser_send_filter_filter(dev->parser, dev->filter_rules, | 
|  | dev->filter_rules_count); | 
|  | usbredirparser_do_write(dev->parser); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_device_connect(void *priv, | 
|  | struct usb_redir_device_connect_header *device_connect) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  | const char *speed; | 
|  |  | 
|  | if (timer_pending(dev->attach_timer) || dev->dev.attached) { | 
|  | ERROR("Received device connect while already connected\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | switch (device_connect->speed) { | 
|  | case usb_redir_speed_low: | 
|  | speed = "low speed"; | 
|  | dev->dev.speed = USB_SPEED_LOW; | 
|  | dev->compatible_speedmask &= ~USB_SPEED_MASK_FULL; | 
|  | dev->compatible_speedmask &= ~USB_SPEED_MASK_HIGH; | 
|  | break; | 
|  | case usb_redir_speed_full: | 
|  | speed = "full speed"; | 
|  | dev->dev.speed = USB_SPEED_FULL; | 
|  | dev->compatible_speedmask &= ~USB_SPEED_MASK_HIGH; | 
|  | break; | 
|  | case usb_redir_speed_high: | 
|  | speed = "high speed"; | 
|  | dev->dev.speed = USB_SPEED_HIGH; | 
|  | break; | 
|  | case usb_redir_speed_super: | 
|  | speed = "super speed"; | 
|  | dev->dev.speed = USB_SPEED_SUPER; | 
|  | break; | 
|  | default: | 
|  | speed = "unknown speed"; | 
|  | dev->dev.speed = USB_SPEED_FULL; | 
|  | } | 
|  |  | 
|  | if (usbredirparser_peer_has_cap(dev->parser, | 
|  | usb_redir_cap_connect_device_version)) { | 
|  | INFO("attaching %s device %04x:%04x version %d.%d class %02x\n", | 
|  | speed, device_connect->vendor_id, device_connect->product_id, | 
|  | ((device_connect->device_version_bcd & 0xf000) >> 12) * 10 + | 
|  | ((device_connect->device_version_bcd & 0x0f00) >>  8), | 
|  | ((device_connect->device_version_bcd & 0x00f0) >>  4) * 10 + | 
|  | ((device_connect->device_version_bcd & 0x000f) >>  0), | 
|  | device_connect->device_class); | 
|  | } else { | 
|  | INFO("attaching %s device %04x:%04x class %02x\n", speed, | 
|  | device_connect->vendor_id, device_connect->product_id, | 
|  | device_connect->device_class); | 
|  | } | 
|  |  | 
|  | dev->dev.speedmask = (1 << dev->dev.speed) | dev->compatible_speedmask; | 
|  | dev->device_info = *device_connect; | 
|  |  | 
|  | if (usbredir_check_filter(dev)) { | 
|  | WARNING("Device %04x:%04x rejected by device filter, not attaching\n", | 
|  | device_connect->vendor_id, device_connect->product_id); | 
|  | return; | 
|  | } | 
|  |  | 
|  | usbredir_check_bulk_receiving(dev); | 
|  | timer_mod(dev->attach_timer, dev->next_attach_time); | 
|  | } | 
|  |  | 
|  | static void usbredir_device_disconnect(void *priv) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  |  | 
|  | /* Stop any pending attaches */ | 
|  | timer_del(dev->attach_timer); | 
|  |  | 
|  | if (dev->dev.attached) { | 
|  | DPRINTF("detaching device\n"); | 
|  | usb_device_detach(&dev->dev); | 
|  | /* | 
|  | * Delay next usb device attach to give the guest a chance to see | 
|  | * see the detach / attach in case of quick close / open succession | 
|  | */ | 
|  | dev->next_attach_time = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + 200; | 
|  | } | 
|  |  | 
|  | /* Reset state so that the next dev connected starts with a clean slate */ | 
|  | usbredir_cleanup_device_queues(dev); | 
|  | usbredir_init_endpoints(dev); | 
|  | dev->interface_info.interface_count = NO_INTERFACE_INFO; | 
|  | dev->dev.addr = 0; | 
|  | dev->dev.speed = 0; | 
|  | dev->compatible_speedmask = USB_SPEED_MASK_FULL | USB_SPEED_MASK_HIGH; | 
|  | } | 
|  |  | 
|  | static void usbredir_interface_info(void *priv, | 
|  | struct usb_redir_interface_info_header *interface_info) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  |  | 
|  | dev->interface_info = *interface_info; | 
|  |  | 
|  | /* | 
|  | * If we receive interface info after the device has already been | 
|  | * connected (ie on a set_config), re-check interface dependent things. | 
|  | */ | 
|  | if (timer_pending(dev->attach_timer) || dev->dev.attached) { | 
|  | usbredir_check_bulk_receiving(dev); | 
|  | if (usbredir_check_filter(dev)) { | 
|  | ERROR("Device no longer matches filter after interface info " | 
|  | "change, disconnecting!\n"); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_mark_speed_incompatible(USBRedirDevice *dev, int speed) | 
|  | { | 
|  | dev->compatible_speedmask &= ~(1 << speed); | 
|  | dev->dev.speedmask = (1 << dev->dev.speed) | dev->compatible_speedmask; | 
|  | } | 
|  |  | 
|  | static void usbredir_set_pipeline(USBRedirDevice *dev, struct USBEndpoint *uep) | 
|  | { | 
|  | if (uep->type != USB_ENDPOINT_XFER_BULK) { | 
|  | return; | 
|  | } | 
|  | if (uep->pid == USB_TOKEN_OUT) { | 
|  | uep->pipeline = true; | 
|  | } | 
|  | if (uep->pid == USB_TOKEN_IN && uep->max_packet_size != 0 && | 
|  | usbredirparser_peer_has_cap(dev->parser, | 
|  | usb_redir_cap_32bits_bulk_length)) { | 
|  | uep->pipeline = true; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_setup_usb_eps(USBRedirDevice *dev) | 
|  | { | 
|  | struct USBEndpoint *usb_ep; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < MAX_ENDPOINTS; i++) { | 
|  | usb_ep = I2USBEP(dev, i); | 
|  | usb_ep->type = dev->endpoint[i].type; | 
|  | usb_ep->ifnum = dev->endpoint[i].interface; | 
|  | usb_ep->max_packet_size = dev->endpoint[i].max_packet_size; | 
|  | usb_ep->max_streams = dev->endpoint[i].max_streams; | 
|  | usbredir_set_pipeline(dev, usb_ep); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_ep_info(void *priv, | 
|  | struct usb_redir_ep_info_header *ep_info) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  | int i; | 
|  |  | 
|  | assert(dev != NULL); | 
|  | for (i = 0; i < MAX_ENDPOINTS; i++) { | 
|  | dev->endpoint[i].type = ep_info->type[i]; | 
|  | dev->endpoint[i].interval = ep_info->interval[i]; | 
|  | dev->endpoint[i].interface = ep_info->interface[i]; | 
|  | if (usbredirparser_peer_has_cap(dev->parser, | 
|  | usb_redir_cap_ep_info_max_packet_size)) { | 
|  | dev->endpoint[i].max_packet_size = ep_info->max_packet_size[i]; | 
|  | } | 
|  | #if USBREDIR_VERSION >= 0x000700 | 
|  | if (usbredirparser_peer_has_cap(dev->parser, | 
|  | usb_redir_cap_bulk_streams)) { | 
|  | dev->endpoint[i].max_streams = ep_info->max_streams[i]; | 
|  | } | 
|  | #endif | 
|  | switch (dev->endpoint[i].type) { | 
|  | case usb_redir_type_invalid: | 
|  | break; | 
|  | case usb_redir_type_iso: | 
|  | usbredir_mark_speed_incompatible(dev, USB_SPEED_FULL); | 
|  | usbredir_mark_speed_incompatible(dev, USB_SPEED_HIGH); | 
|  | /* Fall through */ | 
|  | case usb_redir_type_interrupt: | 
|  | if (!usbredirparser_peer_has_cap(dev->parser, | 
|  | usb_redir_cap_ep_info_max_packet_size) || | 
|  | ep_info->max_packet_size[i] > 64) { | 
|  | usbredir_mark_speed_incompatible(dev, USB_SPEED_FULL); | 
|  | } | 
|  | if (!usbredirparser_peer_has_cap(dev->parser, | 
|  | usb_redir_cap_ep_info_max_packet_size) || | 
|  | ep_info->max_packet_size[i] > 1024) { | 
|  | usbredir_mark_speed_incompatible(dev, USB_SPEED_HIGH); | 
|  | } | 
|  | if (dev->endpoint[i].interval == 0) { | 
|  | ERROR("Received 0 interval for isoc or irq endpoint\n"); | 
|  | usbredir_reject_device(dev); | 
|  | return; | 
|  | } | 
|  | /* Fall through */ | 
|  | case usb_redir_type_control: | 
|  | case usb_redir_type_bulk: | 
|  | DPRINTF("ep: %02X type: %d interface: %d\n", I2EP(i), | 
|  | dev->endpoint[i].type, dev->endpoint[i].interface); | 
|  | break; | 
|  | default: | 
|  | ERROR("Received invalid endpoint type\n"); | 
|  | usbredir_reject_device(dev); | 
|  | return; | 
|  | } | 
|  | } | 
|  | /* The new ep info may have caused a speed incompatibility, recheck */ | 
|  | if (dev->dev.attached && | 
|  | !(dev->dev.port->speedmask & dev->dev.speedmask)) { | 
|  | ERROR("Device no longer matches speed after endpoint info change, " | 
|  | "disconnecting!\n"); | 
|  | usbredir_reject_device(dev); | 
|  | return; | 
|  | } | 
|  | usbredir_setup_usb_eps(dev); | 
|  | usbredir_check_bulk_receiving(dev); | 
|  | } | 
|  |  | 
|  | static void usbredir_configuration_status(void *priv, uint64_t id, | 
|  | struct usb_redir_configuration_status_header *config_status) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  | USBPacket *p; | 
|  |  | 
|  | DPRINTF("set config status %d config %d id %"PRIu64"\n", | 
|  | config_status->status, config_status->configuration, id); | 
|  |  | 
|  | p = usbredir_find_packet_by_id(dev, 0, id); | 
|  | if (p) { | 
|  | if (dev->dev.setup_buf[0] & USB_DIR_IN) { | 
|  | dev->dev.data_buf[0] = config_status->configuration; | 
|  | p->actual_length = 1; | 
|  | } | 
|  | usbredir_handle_status(dev, p, config_status->status); | 
|  | usb_generic_async_ctrl_complete(&dev->dev, p); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_alt_setting_status(void *priv, uint64_t id, | 
|  | struct usb_redir_alt_setting_status_header *alt_setting_status) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  | USBPacket *p; | 
|  |  | 
|  | DPRINTF("alt status %d intf %d alt %d id: %"PRIu64"\n", | 
|  | alt_setting_status->status, alt_setting_status->interface, | 
|  | alt_setting_status->alt, id); | 
|  |  | 
|  | p = usbredir_find_packet_by_id(dev, 0, id); | 
|  | if (p) { | 
|  | if (dev->dev.setup_buf[0] & USB_DIR_IN) { | 
|  | dev->dev.data_buf[0] = alt_setting_status->alt; | 
|  | p->actual_length = 1; | 
|  | } | 
|  | usbredir_handle_status(dev, p, alt_setting_status->status); | 
|  | usb_generic_async_ctrl_complete(&dev->dev, p); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_iso_stream_status(void *priv, uint64_t id, | 
|  | struct usb_redir_iso_stream_status_header *iso_stream_status) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  | uint8_t ep = iso_stream_status->endpoint; | 
|  |  | 
|  | DPRINTF("iso status %d ep %02X id %"PRIu64"\n", iso_stream_status->status, | 
|  | ep, id); | 
|  |  | 
|  | if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].iso_started) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | dev->endpoint[EP2I(ep)].iso_error = iso_stream_status->status; | 
|  | if (iso_stream_status->status == usb_redir_stall) { | 
|  | DPRINTF("iso stream stopped by peer ep %02X\n", ep); | 
|  | dev->endpoint[EP2I(ep)].iso_started = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_interrupt_receiving_status(void *priv, uint64_t id, | 
|  | struct usb_redir_interrupt_receiving_status_header | 
|  | *interrupt_receiving_status) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  | uint8_t ep = interrupt_receiving_status->endpoint; | 
|  |  | 
|  | DPRINTF("interrupt recv status %d ep %02X id %"PRIu64"\n", | 
|  | interrupt_receiving_status->status, ep, id); | 
|  |  | 
|  | if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].interrupt_started) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | dev->endpoint[EP2I(ep)].interrupt_error = | 
|  | interrupt_receiving_status->status; | 
|  | if (interrupt_receiving_status->status == usb_redir_stall) { | 
|  | DPRINTF("interrupt receiving stopped by peer ep %02X\n", ep); | 
|  | dev->endpoint[EP2I(ep)].interrupt_started = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_bulk_streams_status(void *priv, uint64_t id, | 
|  | struct usb_redir_bulk_streams_status_header *bulk_streams_status) | 
|  | { | 
|  | #if USBREDIR_VERSION >= 0x000700 | 
|  | USBRedirDevice *dev = priv; | 
|  |  | 
|  | if (bulk_streams_status->status == usb_redir_success) { | 
|  | DPRINTF("bulk streams status %d eps %08x\n", | 
|  | bulk_streams_status->status, bulk_streams_status->endpoints); | 
|  | } else { | 
|  | ERROR("bulk streams %s failed status %d eps %08x\n", | 
|  | (bulk_streams_status->no_streams == 0) ? "free" : "alloc", | 
|  | bulk_streams_status->status, bulk_streams_status->endpoints); | 
|  | ERROR("usb-redir-host does not provide streams, disconnecting\n"); | 
|  | usbredir_reject_device(dev); | 
|  | } | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static void usbredir_bulk_receiving_status(void *priv, uint64_t id, | 
|  | struct usb_redir_bulk_receiving_status_header *bulk_receiving_status) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  | uint8_t ep = bulk_receiving_status->endpoint; | 
|  |  | 
|  | DPRINTF("bulk recv status %d ep %02X id %"PRIu64"\n", | 
|  | bulk_receiving_status->status, ep, id); | 
|  |  | 
|  | if (!dev->dev.attached || !dev->endpoint[EP2I(ep)].bulk_receiving_started) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (bulk_receiving_status->status == usb_redir_stall) { | 
|  | DPRINTF("bulk receiving stopped by peer ep %02X\n", ep); | 
|  | dev->endpoint[EP2I(ep)].bulk_receiving_started = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_control_packet(void *priv, uint64_t id, | 
|  | struct usb_redir_control_packet_header *control_packet, | 
|  | uint8_t *data, int data_len) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  | USBPacket *p; | 
|  | int len = control_packet->length; | 
|  |  | 
|  | DPRINTF("ctrl-in status %d len %d id %"PRIu64"\n", control_packet->status, | 
|  | len, id); | 
|  |  | 
|  | /* Fix up USB-3 ep0 maxpacket size to allow superspeed connected devices | 
|  | * to work redirected to a not superspeed capable hcd */ | 
|  | if (dev->dev.speed == USB_SPEED_SUPER && | 
|  | !((dev->dev.port->speedmask & USB_SPEED_MASK_SUPER)) && | 
|  | control_packet->requesttype == 0x80 && | 
|  | control_packet->request == 6 && | 
|  | control_packet->value == 0x100 && control_packet->index == 0 && | 
|  | data_len >= 18 && data[7] == 9) { | 
|  | data[7] = 64; | 
|  | } | 
|  |  | 
|  | p = usbredir_find_packet_by_id(dev, 0, id); | 
|  | if (p) { | 
|  | usbredir_handle_status(dev, p, control_packet->status); | 
|  | if (data_len > 0) { | 
|  | usbredir_log_data(dev, "ctrl data in:", data, data_len); | 
|  | if (data_len > sizeof(dev->dev.data_buf)) { | 
|  | ERROR("ctrl buffer too small (%d > %zu)\n", | 
|  | data_len, sizeof(dev->dev.data_buf)); | 
|  | p->status = USB_RET_STALL; | 
|  | data_len = len = sizeof(dev->dev.data_buf); | 
|  | } | 
|  | memcpy(dev->dev.data_buf, data, data_len); | 
|  | } | 
|  | p->actual_length = len; | 
|  | /* | 
|  | * If this is GET_DESCRIPTOR request for configuration descriptor, | 
|  | * remove 'remote wakeup' flag from it to prevent idle power down | 
|  | * in Windows guest | 
|  | */ | 
|  | if (dev->suppress_remote_wake && | 
|  | control_packet->requesttype == USB_DIR_IN && | 
|  | control_packet->request == USB_REQ_GET_DESCRIPTOR && | 
|  | control_packet->value == (USB_DT_CONFIG << 8) && | 
|  | control_packet->index == 0 && | 
|  | /* bmAttributes field of config descriptor */ | 
|  | len > 7 && (dev->dev.data_buf[7] & USB_CFG_ATT_WAKEUP)) { | 
|  | DPRINTF("Removed remote wake %04X:%04X\n", | 
|  | dev->device_info.vendor_id, | 
|  | dev->device_info.product_id); | 
|  | dev->dev.data_buf[7] &= ~USB_CFG_ATT_WAKEUP; | 
|  | } | 
|  | usb_generic_async_ctrl_complete(&dev->dev, p); | 
|  | } | 
|  | free(data); | 
|  | } | 
|  |  | 
|  | static void usbredir_bulk_packet(void *priv, uint64_t id, | 
|  | struct usb_redir_bulk_packet_header *bulk_packet, | 
|  | uint8_t *data, int data_len) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  | uint8_t ep = bulk_packet->endpoint; | 
|  | int len = (bulk_packet->length_high << 16) | bulk_packet->length; | 
|  | USBPacket *p; | 
|  |  | 
|  | DPRINTF("bulk-in status %d ep %02X stream %u len %d id %"PRIu64"\n", | 
|  | bulk_packet->status, ep, bulk_packet->stream_id, len, id); | 
|  |  | 
|  | p = usbredir_find_packet_by_id(dev, ep, id); | 
|  | if (p) { | 
|  | size_t size = usb_packet_size(p); | 
|  | usbredir_handle_status(dev, p, bulk_packet->status); | 
|  | if (data_len > 0) { | 
|  | usbredir_log_data(dev, "bulk data in:", data, data_len); | 
|  | if (data_len > size) { | 
|  | ERROR("bulk got more data then requested (%d > %zd)\n", | 
|  | data_len, p->iov.size); | 
|  | p->status = USB_RET_BABBLE; | 
|  | data_len = len = size; | 
|  | } | 
|  | usb_packet_copy(p, data, data_len); | 
|  | } | 
|  | p->actual_length = len; | 
|  | if (p->pid == USB_TOKEN_IN && p->ep->pipeline) { | 
|  | usb_combined_input_packet_complete(&dev->dev, p); | 
|  | } else { | 
|  | usb_packet_complete(&dev->dev, p); | 
|  | } | 
|  | } | 
|  | free(data); | 
|  | } | 
|  |  | 
|  | static void usbredir_iso_packet(void *priv, uint64_t id, | 
|  | struct usb_redir_iso_packet_header *iso_packet, | 
|  | uint8_t *data, int data_len) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  | uint8_t ep = iso_packet->endpoint; | 
|  |  | 
|  | DPRINTF2("iso-in status %d ep %02X len %d id %"PRIu64"\n", | 
|  | iso_packet->status, ep, data_len, id); | 
|  |  | 
|  | if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_ISOC) { | 
|  | ERROR("received iso packet for non iso endpoint %02X\n", ep); | 
|  | free(data); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (dev->endpoint[EP2I(ep)].iso_started == 0) { | 
|  | DPRINTF("received iso packet for non started stream ep %02X\n", ep); | 
|  | free(data); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* bufp_alloc also adds the packet to the ep queue */ | 
|  | bufp_alloc(dev, data, data_len, iso_packet->status, ep, data); | 
|  | } | 
|  |  | 
|  | static void usbredir_interrupt_packet(void *priv, uint64_t id, | 
|  | struct usb_redir_interrupt_packet_header *interrupt_packet, | 
|  | uint8_t *data, int data_len) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  | uint8_t ep = interrupt_packet->endpoint; | 
|  |  | 
|  | DPRINTF("interrupt-in status %d ep %02X len %d id %"PRIu64"\n", | 
|  | interrupt_packet->status, ep, data_len, id); | 
|  |  | 
|  | if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_INT) { | 
|  | ERROR("received int packet for non interrupt endpoint %02X\n", ep); | 
|  | free(data); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (ep & USB_DIR_IN) { | 
|  | if (dev->endpoint[EP2I(ep)].interrupt_started == 0) { | 
|  | DPRINTF("received int packet while not started ep %02X\n", ep); | 
|  | free(data); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* bufp_alloc also adds the packet to the ep queue */ | 
|  | bufp_alloc(dev, data, data_len, interrupt_packet->status, ep, data); | 
|  |  | 
|  | /* insufficient data solved with USB_RET_NAK */ | 
|  | usb_wakeup(usb_ep_get(&dev->dev, USB_TOKEN_IN, ep & 0x0f), 0); | 
|  | } else { | 
|  | /* | 
|  | * We report output interrupt packets as completed directly upon | 
|  | * submission, so all we can do here if one failed is warn. | 
|  | */ | 
|  | if (interrupt_packet->status) { | 
|  | WARNING("interrupt output failed status %d ep %02X id %"PRIu64"\n", | 
|  | interrupt_packet->status, ep, id); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbredir_buffered_bulk_packet(void *priv, uint64_t id, | 
|  | struct usb_redir_buffered_bulk_packet_header *buffered_bulk_packet, | 
|  | uint8_t *data, int data_len) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  | uint8_t status, ep = buffered_bulk_packet->endpoint; | 
|  | void *free_on_destroy; | 
|  | int i, len; | 
|  |  | 
|  | DPRINTF("buffered-bulk-in status %d ep %02X len %d id %"PRIu64"\n", | 
|  | buffered_bulk_packet->status, ep, data_len, id); | 
|  |  | 
|  | if (dev->endpoint[EP2I(ep)].type != USB_ENDPOINT_XFER_BULK) { | 
|  | ERROR("received buffered-bulk packet for non bulk ep %02X\n", ep); | 
|  | free(data); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (dev->endpoint[EP2I(ep)].bulk_receiving_started == 0) { | 
|  | DPRINTF("received buffered-bulk packet on not started ep %02X\n", ep); | 
|  | free(data); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Data must be in maxp chunks for buffered_bulk_add_*_data_to_packet */ | 
|  | len = dev->endpoint[EP2I(ep)].max_packet_size; | 
|  | status = usb_redir_success; | 
|  | free_on_destroy = NULL; | 
|  | for (i = 0; i < data_len; i += len) { | 
|  | int r; | 
|  | if (len >= (data_len - i)) { | 
|  | len = data_len - i; | 
|  | status = buffered_bulk_packet->status; | 
|  | free_on_destroy = data; | 
|  | } | 
|  | /* bufp_alloc also adds the packet to the ep queue */ | 
|  | r = bufp_alloc(dev, data + i, len, status, ep, free_on_destroy); | 
|  | if (r) { | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (dev->endpoint[EP2I(ep)].pending_async_packet) { | 
|  | USBPacket *p = dev->endpoint[EP2I(ep)].pending_async_packet; | 
|  | dev->endpoint[EP2I(ep)].pending_async_packet = NULL; | 
|  | usbredir_buffered_bulk_in_complete(dev, p, ep); | 
|  | usb_packet_complete(&dev->dev, p); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Migration code | 
|  | */ | 
|  |  | 
|  | static int usbredir_pre_save(void *priv) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  |  | 
|  | usbredir_fill_already_in_flight(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int usbredir_post_load(void *priv, int version_id) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  |  | 
|  | if (dev == NULL || dev->parser == NULL) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | switch (dev->device_info.speed) { | 
|  | case usb_redir_speed_low: | 
|  | dev->dev.speed = USB_SPEED_LOW; | 
|  | break; | 
|  | case usb_redir_speed_full: | 
|  | dev->dev.speed = USB_SPEED_FULL; | 
|  | break; | 
|  | case usb_redir_speed_high: | 
|  | dev->dev.speed = USB_SPEED_HIGH; | 
|  | break; | 
|  | case usb_redir_speed_super: | 
|  | dev->dev.speed = USB_SPEED_SUPER; | 
|  | break; | 
|  | default: | 
|  | dev->dev.speed = USB_SPEED_FULL; | 
|  | } | 
|  | dev->dev.speedmask = (1 << dev->dev.speed); | 
|  |  | 
|  | usbredir_setup_usb_eps(dev); | 
|  | usbredir_check_bulk_receiving(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* For usbredirparser migration */ | 
|  | static int usbredir_put_parser(QEMUFile *f, void *priv, size_t unused, | 
|  | const VMStateField *field, JSONWriter *vmdesc) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  | uint8_t *data; | 
|  | int len; | 
|  |  | 
|  | if (dev->parser == NULL) { | 
|  | qemu_put_be32(f, 0); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | usbredirparser_serialize(dev->parser, &data, &len); | 
|  | if (!data) { | 
|  | error_report("usbredirparser_serialize failed"); | 
|  | exit(1); | 
|  | } | 
|  |  | 
|  | qemu_put_be32(f, len); | 
|  | qemu_put_buffer(f, data, len); | 
|  |  | 
|  | free(data); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int usbredir_get_parser(QEMUFile *f, void *priv, size_t unused, | 
|  | const VMStateField *field) | 
|  | { | 
|  | USBRedirDevice *dev = priv; | 
|  | uint8_t *data; | 
|  | int len, ret; | 
|  |  | 
|  | len = qemu_get_be32(f); | 
|  | if (len == 0) { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If our chardev is not open already at this point the usbredir connection | 
|  | * has been broken (non seamless migration, or restore from disk). | 
|  | * | 
|  | * In this case create a temporary parser to receive the migration data, | 
|  | * and schedule the close_bh to report the device as disconnected to the | 
|  | * guest and to destroy the parser again. | 
|  | */ | 
|  | if (dev->parser == NULL) { | 
|  | WARNING("usb-redir connection broken during migration\n"); | 
|  | usbredir_create_parser(dev); | 
|  | qemu_bh_schedule(dev->chardev_close_bh); | 
|  | } | 
|  |  | 
|  | data = g_malloc(len); | 
|  | qemu_get_buffer(f, data, len); | 
|  |  | 
|  | ret = usbredirparser_unserialize(dev->parser, data, len); | 
|  |  | 
|  | g_free(data); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static const VMStateInfo usbredir_parser_vmstate_info = { | 
|  | .name = "usb-redir-parser", | 
|  | .put  = usbredir_put_parser, | 
|  | .get  = usbredir_get_parser, | 
|  | }; | 
|  |  | 
|  |  | 
|  | /* For buffered packets (iso/irq) queue migration */ | 
|  | static int usbredir_put_bufpq(QEMUFile *f, void *priv, size_t unused, | 
|  | const VMStateField *field, JSONWriter *vmdesc) | 
|  | { | 
|  | struct endp_data *endp = priv; | 
|  | USBRedirDevice *dev = endp->dev; | 
|  | struct buf_packet *bufp; | 
|  | int len, i = 0; | 
|  |  | 
|  | qemu_put_be32(f, endp->bufpq_size); | 
|  | QTAILQ_FOREACH(bufp, &endp->bufpq, next) { | 
|  | len = bufp->len - bufp->offset; | 
|  | DPRINTF("put_bufpq %d/%d len %d status %d\n", i + 1, endp->bufpq_size, | 
|  | len, bufp->status); | 
|  | qemu_put_be32(f, len); | 
|  | qemu_put_be32(f, bufp->status); | 
|  | qemu_put_buffer(f, bufp->data + bufp->offset, len); | 
|  | i++; | 
|  | } | 
|  | assert(i == endp->bufpq_size); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int usbredir_get_bufpq(QEMUFile *f, void *priv, size_t unused, | 
|  | const VMStateField *field) | 
|  | { | 
|  | struct endp_data *endp = priv; | 
|  | USBRedirDevice *dev = endp->dev; | 
|  | struct buf_packet *bufp; | 
|  | int i; | 
|  |  | 
|  | endp->bufpq_size = qemu_get_be32(f); | 
|  | for (i = 0; i < endp->bufpq_size; i++) { | 
|  | bufp = g_new(struct buf_packet, 1); | 
|  | bufp->len = qemu_get_be32(f); | 
|  | bufp->status = qemu_get_be32(f); | 
|  | bufp->offset = 0; | 
|  | bufp->data = malloc(bufp->len); /* regular malloc! */ | 
|  | if (!bufp->data) { | 
|  | error_report("usbredir_get_bufpq: out of memory"); | 
|  | exit(1); | 
|  | } | 
|  | bufp->free_on_destroy = bufp->data; | 
|  | qemu_get_buffer(f, bufp->data, bufp->len); | 
|  | QTAILQ_INSERT_TAIL(&endp->bufpq, bufp, next); | 
|  | DPRINTF("get_bufpq %d/%d len %d status %d\n", i + 1, endp->bufpq_size, | 
|  | bufp->len, bufp->status); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const VMStateInfo usbredir_ep_bufpq_vmstate_info = { | 
|  | .name = "usb-redir-bufpq", | 
|  | .put  = usbredir_put_bufpq, | 
|  | .get  = usbredir_get_bufpq, | 
|  | }; | 
|  |  | 
|  |  | 
|  | /* For endp_data migration */ | 
|  | static bool usbredir_bulk_receiving_needed(void *priv) | 
|  | { | 
|  | struct endp_data *endp = priv; | 
|  |  | 
|  | return endp->bulk_receiving_started; | 
|  | } | 
|  |  | 
|  | static const VMStateDescription usbredir_bulk_receiving_vmstate = { | 
|  | .name = "usb-redir-ep/bulk-receiving", | 
|  | .version_id = 1, | 
|  | .minimum_version_id = 1, | 
|  | .needed = usbredir_bulk_receiving_needed, | 
|  | .fields = (const VMStateField[]) { | 
|  | VMSTATE_UINT8(bulk_receiving_started, struct endp_data), | 
|  | VMSTATE_END_OF_LIST() | 
|  | } | 
|  | }; | 
|  |  | 
|  | static bool usbredir_stream_needed(void *priv) | 
|  | { | 
|  | struct endp_data *endp = priv; | 
|  |  | 
|  | return endp->max_streams; | 
|  | } | 
|  |  | 
|  | static const VMStateDescription usbredir_stream_vmstate = { | 
|  | .name = "usb-redir-ep/stream-state", | 
|  | .version_id = 1, | 
|  | .minimum_version_id = 1, | 
|  | .needed = usbredir_stream_needed, | 
|  | .fields = (const VMStateField[]) { | 
|  | VMSTATE_UINT32(max_streams, struct endp_data), | 
|  | VMSTATE_END_OF_LIST() | 
|  | } | 
|  | }; | 
|  |  | 
|  | static const VMStateDescription usbredir_ep_vmstate = { | 
|  | .name = "usb-redir-ep", | 
|  | .version_id = 1, | 
|  | .minimum_version_id = 1, | 
|  | .fields = (const VMStateField[]) { | 
|  | VMSTATE_UINT8(type, struct endp_data), | 
|  | VMSTATE_UINT8(interval, struct endp_data), | 
|  | VMSTATE_UINT8(interface, struct endp_data), | 
|  | VMSTATE_UINT16(max_packet_size, struct endp_data), | 
|  | VMSTATE_UINT8(iso_started, struct endp_data), | 
|  | VMSTATE_UINT8(iso_error, struct endp_data), | 
|  | VMSTATE_UINT8(interrupt_started, struct endp_data), | 
|  | VMSTATE_UINT8(interrupt_error, struct endp_data), | 
|  | VMSTATE_UINT8(bufpq_prefilled, struct endp_data), | 
|  | VMSTATE_UINT8(bufpq_dropping_packets, struct endp_data), | 
|  | { | 
|  | .name         = "bufpq", | 
|  | .version_id   = 0, | 
|  | .field_exists = NULL, | 
|  | .size         = 0, | 
|  | .info         = &usbredir_ep_bufpq_vmstate_info, | 
|  | .flags        = VMS_SINGLE, | 
|  | .offset       = 0, | 
|  | }, | 
|  | VMSTATE_INT32(bufpq_target_size, struct endp_data), | 
|  | VMSTATE_END_OF_LIST() | 
|  | }, | 
|  | .subsections = (const VMStateDescription * const []) { | 
|  | &usbredir_bulk_receiving_vmstate, | 
|  | &usbredir_stream_vmstate, | 
|  | NULL | 
|  | } | 
|  | }; | 
|  |  | 
|  |  | 
|  | /* For PacketIdQueue migration */ | 
|  | static int usbredir_put_packet_id_q(QEMUFile *f, void *priv, size_t unused, | 
|  | const VMStateField *field, | 
|  | JSONWriter *vmdesc) | 
|  | { | 
|  | struct PacketIdQueue *q = priv; | 
|  | USBRedirDevice *dev = q->dev; | 
|  | struct PacketIdQueueEntry *e; | 
|  | int remain = q->size; | 
|  |  | 
|  | DPRINTF("put_packet_id_q %s size %d\n", q->name, q->size); | 
|  | qemu_put_be32(f, q->size); | 
|  | QTAILQ_FOREACH(e, &q->head, next) { | 
|  | qemu_put_be64(f, e->id); | 
|  | remain--; | 
|  | } | 
|  | assert(remain == 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int usbredir_get_packet_id_q(QEMUFile *f, void *priv, size_t unused, | 
|  | const VMStateField *field) | 
|  | { | 
|  | struct PacketIdQueue *q = priv; | 
|  | USBRedirDevice *dev = q->dev; | 
|  | int i, size; | 
|  | uint64_t id; | 
|  |  | 
|  | size = qemu_get_be32(f); | 
|  | DPRINTF("get_packet_id_q %s size %d\n", q->name, size); | 
|  | for (i = 0; i < size; i++) { | 
|  | id = qemu_get_be64(f); | 
|  | packet_id_queue_add(q, id); | 
|  | } | 
|  | assert(q->size == size); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const VMStateInfo usbredir_ep_packet_id_q_vmstate_info = { | 
|  | .name = "usb-redir-packet-id-q", | 
|  | .put  = usbredir_put_packet_id_q, | 
|  | .get  = usbredir_get_packet_id_q, | 
|  | }; | 
|  |  | 
|  | static const VMStateDescription usbredir_ep_packet_id_queue_vmstate = { | 
|  | .name = "usb-redir-packet-id-queue", | 
|  | .version_id = 1, | 
|  | .minimum_version_id = 1, | 
|  | .fields = (const VMStateField[]) { | 
|  | { | 
|  | .name         = "queue", | 
|  | .version_id   = 0, | 
|  | .field_exists = NULL, | 
|  | .size         = 0, | 
|  | .info         = &usbredir_ep_packet_id_q_vmstate_info, | 
|  | .flags        = VMS_SINGLE, | 
|  | .offset       = 0, | 
|  | }, | 
|  | VMSTATE_END_OF_LIST() | 
|  | } | 
|  | }; | 
|  |  | 
|  |  | 
|  | /* For usb_redir_device_connect_header migration */ | 
|  | static const VMStateDescription usbredir_device_info_vmstate = { | 
|  | .name = "usb-redir-device-info", | 
|  | .version_id = 1, | 
|  | .minimum_version_id = 1, | 
|  | .fields = (const VMStateField[]) { | 
|  | VMSTATE_UINT8(speed, struct usb_redir_device_connect_header), | 
|  | VMSTATE_UINT8(device_class, struct usb_redir_device_connect_header), | 
|  | VMSTATE_UINT8(device_subclass, struct usb_redir_device_connect_header), | 
|  | VMSTATE_UINT8(device_protocol, struct usb_redir_device_connect_header), | 
|  | VMSTATE_UINT16(vendor_id, struct usb_redir_device_connect_header), | 
|  | VMSTATE_UINT16(product_id, struct usb_redir_device_connect_header), | 
|  | VMSTATE_UINT16(device_version_bcd, | 
|  | struct usb_redir_device_connect_header), | 
|  | VMSTATE_END_OF_LIST() | 
|  | } | 
|  | }; | 
|  |  | 
|  |  | 
|  | /* For usb_redir_interface_info_header migration */ | 
|  | static const VMStateDescription usbredir_interface_info_vmstate = { | 
|  | .name = "usb-redir-interface-info", | 
|  | .version_id = 1, | 
|  | .minimum_version_id = 1, | 
|  | .fields = (const VMStateField[]) { | 
|  | VMSTATE_UINT32(interface_count, | 
|  | struct usb_redir_interface_info_header), | 
|  | VMSTATE_UINT8_ARRAY(interface, | 
|  | struct usb_redir_interface_info_header, 32), | 
|  | VMSTATE_UINT8_ARRAY(interface_class, | 
|  | struct usb_redir_interface_info_header, 32), | 
|  | VMSTATE_UINT8_ARRAY(interface_subclass, | 
|  | struct usb_redir_interface_info_header, 32), | 
|  | VMSTATE_UINT8_ARRAY(interface_protocol, | 
|  | struct usb_redir_interface_info_header, 32), | 
|  | VMSTATE_END_OF_LIST() | 
|  | } | 
|  | }; | 
|  |  | 
|  |  | 
|  | /* And finally the USBRedirDevice vmstate itself */ | 
|  | static const VMStateDescription usbredir_vmstate = { | 
|  | .name = "usb-redir", | 
|  | .version_id = 1, | 
|  | .minimum_version_id = 1, | 
|  | .pre_save = usbredir_pre_save, | 
|  | .post_load = usbredir_post_load, | 
|  | .fields = (const VMStateField[]) { | 
|  | VMSTATE_USB_DEVICE(dev, USBRedirDevice), | 
|  | VMSTATE_TIMER_PTR(attach_timer, USBRedirDevice), | 
|  | { | 
|  | .name         = "parser", | 
|  | .version_id   = 0, | 
|  | .field_exists = NULL, | 
|  | .size         = 0, | 
|  | .info         = &usbredir_parser_vmstate_info, | 
|  | .flags        = VMS_SINGLE, | 
|  | .offset       = 0, | 
|  | }, | 
|  | VMSTATE_STRUCT_ARRAY(endpoint, USBRedirDevice, MAX_ENDPOINTS, 1, | 
|  | usbredir_ep_vmstate, struct endp_data), | 
|  | VMSTATE_STRUCT(cancelled, USBRedirDevice, 1, | 
|  | usbredir_ep_packet_id_queue_vmstate, | 
|  | struct PacketIdQueue), | 
|  | VMSTATE_STRUCT(already_in_flight, USBRedirDevice, 1, | 
|  | usbredir_ep_packet_id_queue_vmstate, | 
|  | struct PacketIdQueue), | 
|  | VMSTATE_STRUCT(device_info, USBRedirDevice, 1, | 
|  | usbredir_device_info_vmstate, | 
|  | struct usb_redir_device_connect_header), | 
|  | VMSTATE_STRUCT(interface_info, USBRedirDevice, 1, | 
|  | usbredir_interface_info_vmstate, | 
|  | struct usb_redir_interface_info_header), | 
|  | VMSTATE_END_OF_LIST() | 
|  | } | 
|  | }; | 
|  |  | 
|  | static Property usbredir_properties[] = { | 
|  | DEFINE_PROP_CHR("chardev", USBRedirDevice, cs), | 
|  | DEFINE_PROP_UINT8("debug", USBRedirDevice, debug, usbredirparser_warning), | 
|  | DEFINE_PROP_STRING("filter", USBRedirDevice, filter_str), | 
|  | DEFINE_PROP_BOOL("streams", USBRedirDevice, enable_streams, true), | 
|  | DEFINE_PROP_BOOL("suppress-remote-wake", USBRedirDevice, | 
|  | suppress_remote_wake, true), | 
|  | DEFINE_PROP_END_OF_LIST(), | 
|  | }; | 
|  |  | 
|  | static void usbredir_class_initfn(ObjectClass *klass, void *data) | 
|  | { | 
|  | USBDeviceClass *uc = USB_DEVICE_CLASS(klass); | 
|  | DeviceClass *dc = DEVICE_CLASS(klass); | 
|  |  | 
|  | uc->realize        = usbredir_realize; | 
|  | uc->product_desc   = "USB Redirection Device"; | 
|  | uc->unrealize      = usbredir_unrealize; | 
|  | uc->cancel_packet  = usbredir_cancel_packet; | 
|  | uc->handle_reset   = usbredir_handle_reset; | 
|  | uc->handle_data    = usbredir_handle_data; | 
|  | uc->handle_control = usbredir_handle_control; | 
|  | uc->flush_ep_queue = usbredir_flush_ep_queue; | 
|  | uc->ep_stopped     = usbredir_ep_stopped; | 
|  | uc->alloc_streams  = usbredir_alloc_streams; | 
|  | uc->free_streams   = usbredir_free_streams; | 
|  | dc->vmsd           = &usbredir_vmstate; | 
|  | device_class_set_props(dc, usbredir_properties); | 
|  | set_bit(DEVICE_CATEGORY_MISC, dc->categories); | 
|  | } | 
|  |  | 
|  | static void usbredir_instance_init(Object *obj) | 
|  | { | 
|  | USBDevice *udev = USB_DEVICE(obj); | 
|  | USBRedirDevice *dev = USB_REDIRECT(udev); | 
|  |  | 
|  | device_add_bootindex_property(obj, &dev->bootindex, | 
|  | "bootindex", NULL, | 
|  | &udev->qdev); | 
|  | } | 
|  |  | 
|  | static const TypeInfo usbredir_dev_info = { | 
|  | .name          = TYPE_USB_REDIR, | 
|  | .parent        = TYPE_USB_DEVICE, | 
|  | .instance_size = sizeof(USBRedirDevice), | 
|  | .class_init    = usbredir_class_initfn, | 
|  | .instance_init = usbredir_instance_init, | 
|  | }; | 
|  | module_obj(TYPE_USB_REDIR); | 
|  | module_kconfig(USB); | 
|  |  | 
|  | static void usbredir_register_types(void) | 
|  | { | 
|  | type_register_static(&usbredir_dev_info); | 
|  | } | 
|  |  | 
|  | type_init(usbredir_register_types) |