| /* |
| * Dedicated thread for virtio-blk I/O processing |
| * |
| * Copyright 2012 IBM, Corp. |
| * Copyright 2012 Red Hat, Inc. and/or its affiliates |
| * |
| * Authors: |
| * Stefan Hajnoczi <stefanha@redhat.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| * |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "trace.h" |
| #include "qemu/iov.h" |
| #include "qemu/thread.h" |
| #include "qemu/error-report.h" |
| #include "hw/virtio/virtio-access.h" |
| #include "sysemu/block-backend.h" |
| #include "hw/virtio/virtio-blk.h" |
| #include "virtio-blk.h" |
| #include "block/aio.h" |
| #include "hw/virtio/virtio-bus.h" |
| #include "qom/object_interfaces.h" |
| |
| struct VirtIOBlockDataPlane { |
| bool starting; |
| bool stopping; |
| |
| VirtIOBlkConf *conf; |
| |
| VirtIODevice *vdev; |
| VirtQueue *vq; /* virtqueue vring */ |
| EventNotifier *guest_notifier; /* irq */ |
| QEMUBH *bh; /* bh for guest notification */ |
| |
| Notifier insert_notifier, remove_notifier; |
| |
| /* Note that these EventNotifiers are assigned by value. This is |
| * fine as long as you do not call event_notifier_cleanup on them |
| * (because you don't own the file descriptor or handle; you just |
| * use it). |
| */ |
| IOThread *iothread; |
| AioContext *ctx; |
| |
| /* Operation blocker on BDS */ |
| Error *blocker; |
| }; |
| |
| /* Raise an interrupt to signal guest, if necessary */ |
| void virtio_blk_data_plane_notify(VirtIOBlockDataPlane *s) |
| { |
| qemu_bh_schedule(s->bh); |
| } |
| |
| static void notify_guest_bh(void *opaque) |
| { |
| VirtIOBlockDataPlane *s = opaque; |
| |
| if (!virtio_should_notify(s->vdev, s->vq)) { |
| return; |
| } |
| |
| event_notifier_set(s->guest_notifier); |
| } |
| |
| static void data_plane_set_up_op_blockers(VirtIOBlockDataPlane *s) |
| { |
| assert(!s->blocker); |
| error_setg(&s->blocker, "block device is in use by data plane"); |
| blk_op_block_all(s->conf->conf.blk, s->blocker); |
| blk_op_unblock(s->conf->conf.blk, BLOCK_OP_TYPE_RESIZE, s->blocker); |
| blk_op_unblock(s->conf->conf.blk, BLOCK_OP_TYPE_DRIVE_DEL, s->blocker); |
| blk_op_unblock(s->conf->conf.blk, BLOCK_OP_TYPE_BACKUP_SOURCE, s->blocker); |
| blk_op_unblock(s->conf->conf.blk, BLOCK_OP_TYPE_CHANGE, s->blocker); |
| blk_op_unblock(s->conf->conf.blk, BLOCK_OP_TYPE_COMMIT_SOURCE, s->blocker); |
| blk_op_unblock(s->conf->conf.blk, BLOCK_OP_TYPE_COMMIT_TARGET, s->blocker); |
| blk_op_unblock(s->conf->conf.blk, BLOCK_OP_TYPE_EJECT, s->blocker); |
| blk_op_unblock(s->conf->conf.blk, BLOCK_OP_TYPE_EXTERNAL_SNAPSHOT, |
| s->blocker); |
| blk_op_unblock(s->conf->conf.blk, BLOCK_OP_TYPE_INTERNAL_SNAPSHOT, |
| s->blocker); |
| blk_op_unblock(s->conf->conf.blk, BLOCK_OP_TYPE_INTERNAL_SNAPSHOT_DELETE, |
| s->blocker); |
| blk_op_unblock(s->conf->conf.blk, BLOCK_OP_TYPE_MIRROR_SOURCE, s->blocker); |
| blk_op_unblock(s->conf->conf.blk, BLOCK_OP_TYPE_STREAM, s->blocker); |
| blk_op_unblock(s->conf->conf.blk, BLOCK_OP_TYPE_REPLACE, s->blocker); |
| } |
| |
| static void data_plane_remove_op_blockers(VirtIOBlockDataPlane *s) |
| { |
| if (s->blocker) { |
| blk_op_unblock_all(s->conf->conf.blk, s->blocker); |
| error_free(s->blocker); |
| s->blocker = NULL; |
| } |
| } |
| |
| static void data_plane_blk_insert_notifier(Notifier *n, void *data) |
| { |
| VirtIOBlockDataPlane *s = container_of(n, VirtIOBlockDataPlane, |
| insert_notifier); |
| assert(s->conf->conf.blk == data); |
| data_plane_set_up_op_blockers(s); |
| } |
| |
| static void data_plane_blk_remove_notifier(Notifier *n, void *data) |
| { |
| VirtIOBlockDataPlane *s = container_of(n, VirtIOBlockDataPlane, |
| remove_notifier); |
| assert(s->conf->conf.blk == data); |
| data_plane_remove_op_blockers(s); |
| } |
| |
| /* Context: QEMU global mutex held */ |
| void virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *conf, |
| VirtIOBlockDataPlane **dataplane, |
| Error **errp) |
| { |
| VirtIOBlockDataPlane *s; |
| BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev))); |
| VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); |
| |
| *dataplane = NULL; |
| |
| if (!conf->iothread) { |
| return; |
| } |
| |
| /* Don't try if transport does not support notifiers. */ |
| if (!k->set_guest_notifiers || !k->set_host_notifier) { |
| error_setg(errp, |
| "device is incompatible with dataplane " |
| "(transport does not support notifiers)"); |
| return; |
| } |
| |
| /* If dataplane is (re-)enabled while the guest is running there could be |
| * block jobs that can conflict. |
| */ |
| if (blk_op_is_blocked(conf->conf.blk, BLOCK_OP_TYPE_DATAPLANE, errp)) { |
| error_prepend(errp, "cannot start dataplane thread: "); |
| return; |
| } |
| |
| s = g_new0(VirtIOBlockDataPlane, 1); |
| s->vdev = vdev; |
| s->conf = conf; |
| |
| if (conf->iothread) { |
| s->iothread = conf->iothread; |
| object_ref(OBJECT(s->iothread)); |
| } |
| s->ctx = iothread_get_aio_context(s->iothread); |
| s->bh = aio_bh_new(s->ctx, notify_guest_bh, s); |
| |
| s->insert_notifier.notify = data_plane_blk_insert_notifier; |
| s->remove_notifier.notify = data_plane_blk_remove_notifier; |
| blk_add_insert_bs_notifier(conf->conf.blk, &s->insert_notifier); |
| blk_add_remove_bs_notifier(conf->conf.blk, &s->remove_notifier); |
| |
| data_plane_set_up_op_blockers(s); |
| |
| *dataplane = s; |
| } |
| |
| /* Context: QEMU global mutex held */ |
| void virtio_blk_data_plane_destroy(VirtIOBlockDataPlane *s) |
| { |
| if (!s) { |
| return; |
| } |
| |
| virtio_blk_data_plane_stop(s); |
| data_plane_remove_op_blockers(s); |
| notifier_remove(&s->insert_notifier); |
| notifier_remove(&s->remove_notifier); |
| qemu_bh_delete(s->bh); |
| object_unref(OBJECT(s->iothread)); |
| g_free(s); |
| } |
| |
| static void virtio_blk_data_plane_handle_output(VirtIODevice *vdev, |
| VirtQueue *vq) |
| { |
| VirtIOBlock *s = (VirtIOBlock *)vdev; |
| |
| assert(s->dataplane); |
| assert(s->dataplane_started); |
| |
| virtio_blk_handle_vq(s, vq); |
| } |
| |
| /* Context: QEMU global mutex held */ |
| void virtio_blk_data_plane_start(VirtIOBlockDataPlane *s) |
| { |
| BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(s->vdev))); |
| VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); |
| VirtIOBlock *vblk = VIRTIO_BLK(s->vdev); |
| int r; |
| |
| if (vblk->dataplane_started || s->starting) { |
| return; |
| } |
| |
| s->starting = true; |
| s->vq = virtio_get_queue(s->vdev, 0); |
| |
| /* Set up guest notifier (irq) */ |
| r = k->set_guest_notifiers(qbus->parent, 1, true); |
| if (r != 0) { |
| fprintf(stderr, "virtio-blk failed to set guest notifier (%d), " |
| "ensure -enable-kvm is set\n", r); |
| goto fail_guest_notifiers; |
| } |
| s->guest_notifier = virtio_queue_get_guest_notifier(s->vq); |
| |
| /* Set up virtqueue notify */ |
| r = k->set_host_notifier(qbus->parent, 0, true); |
| if (r != 0) { |
| fprintf(stderr, "virtio-blk failed to set host notifier (%d)\n", r); |
| goto fail_host_notifier; |
| } |
| |
| s->starting = false; |
| vblk->dataplane_started = true; |
| trace_virtio_blk_data_plane_start(s); |
| |
| blk_set_aio_context(s->conf->conf.blk, s->ctx); |
| |
| /* Kick right away to begin processing requests already in vring */ |
| event_notifier_set(virtio_queue_get_host_notifier(s->vq)); |
| |
| /* Get this show started by hooking up our callbacks */ |
| aio_context_acquire(s->ctx); |
| virtio_queue_aio_set_host_notifier_handler(s->vq, s->ctx, |
| virtio_blk_data_plane_handle_output); |
| aio_context_release(s->ctx); |
| return; |
| |
| fail_host_notifier: |
| k->set_guest_notifiers(qbus->parent, 1, false); |
| fail_guest_notifiers: |
| vblk->dataplane_disabled = true; |
| s->starting = false; |
| vblk->dataplane_started = true; |
| } |
| |
| /* Context: QEMU global mutex held */ |
| void virtio_blk_data_plane_stop(VirtIOBlockDataPlane *s) |
| { |
| BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(s->vdev))); |
| VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); |
| VirtIOBlock *vblk = VIRTIO_BLK(s->vdev); |
| |
| if (!vblk->dataplane_started || s->stopping) { |
| return; |
| } |
| |
| /* Better luck next time. */ |
| if (vblk->dataplane_disabled) { |
| vblk->dataplane_disabled = false; |
| vblk->dataplane_started = false; |
| return; |
| } |
| s->stopping = true; |
| trace_virtio_blk_data_plane_stop(s); |
| |
| aio_context_acquire(s->ctx); |
| |
| /* Stop notifications for new requests from guest */ |
| virtio_queue_aio_set_host_notifier_handler(s->vq, s->ctx, NULL); |
| |
| /* Drain and switch bs back to the QEMU main loop */ |
| blk_set_aio_context(s->conf->conf.blk, qemu_get_aio_context()); |
| |
| aio_context_release(s->ctx); |
| |
| k->set_host_notifier(qbus->parent, 0, false); |
| |
| /* Clean up guest notifier (irq) */ |
| k->set_guest_notifiers(qbus->parent, 1, false); |
| |
| vblk->dataplane_started = false; |
| s->stopping = false; |
| } |