| /* |
| * Nordic Semiconductor nRF51 SoC |
| * http://infocenter.nordicsemi.com/pdf/nRF51_RM_v3.0.1.pdf |
| * |
| * Copyright 2018 Joel Stanley <joel@jms.id.au> |
| * |
| * This code is licensed under the GPL version 2 or later. See |
| * the COPYING file in the top-level directory. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "hw/arm/boot.h" |
| #include "hw/sysbus.h" |
| #include "hw/misc/unimp.h" |
| #include "exec/address-spaces.h" |
| #include "qemu/log.h" |
| #include "cpu.h" |
| |
| #include "hw/arm/nrf51.h" |
| #include "hw/arm/nrf51_soc.h" |
| |
| /* |
| * The size and base is for the NRF51822 part. If other parts |
| * are supported in the future, add a sub-class of NRF51SoC for |
| * the specific variants |
| */ |
| #define NRF51822_FLASH_PAGES 256 |
| #define NRF51822_SRAM_PAGES 16 |
| #define NRF51822_FLASH_SIZE (NRF51822_FLASH_PAGES * NRF51_PAGE_SIZE) |
| #define NRF51822_SRAM_SIZE (NRF51822_SRAM_PAGES * NRF51_PAGE_SIZE) |
| |
| #define BASE_TO_IRQ(base) ((base >> 12) & 0x1F) |
| |
| static uint64_t clock_read(void *opaque, hwaddr addr, unsigned int size) |
| { |
| qemu_log_mask(LOG_UNIMP, "%s: 0x%" HWADDR_PRIx " [%u]\n", |
| __func__, addr, size); |
| return 1; |
| } |
| |
| static void clock_write(void *opaque, hwaddr addr, uint64_t data, |
| unsigned int size) |
| { |
| qemu_log_mask(LOG_UNIMP, "%s: 0x%" HWADDR_PRIx " <- 0x%" PRIx64 " [%u]\n", |
| __func__, addr, data, size); |
| } |
| |
| static const MemoryRegionOps clock_ops = { |
| .read = clock_read, |
| .write = clock_write |
| }; |
| |
| |
| static void nrf51_soc_realize(DeviceState *dev_soc, Error **errp) |
| { |
| NRF51State *s = NRF51_SOC(dev_soc); |
| MemoryRegion *mr; |
| Error *err = NULL; |
| uint8_t i = 0; |
| hwaddr base_addr = 0; |
| |
| if (!s->board_memory) { |
| error_setg(errp, "memory property was not set"); |
| return; |
| } |
| |
| object_property_set_link(OBJECT(&s->cpu), OBJECT(&s->container), "memory", |
| &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| object_property_set_bool(OBJECT(&s->cpu), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| |
| memory_region_add_subregion_overlap(&s->container, 0, s->board_memory, -1); |
| |
| memory_region_init_ram(&s->sram, OBJECT(s), "nrf51.sram", s->sram_size, |
| &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| memory_region_add_subregion(&s->container, NRF51_SRAM_BASE, &s->sram); |
| |
| /* UART */ |
| object_property_set_bool(OBJECT(&s->uart), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->uart), 0); |
| memory_region_add_subregion_overlap(&s->container, NRF51_UART_BASE, mr, 0); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart), 0, |
| qdev_get_gpio_in(DEVICE(&s->cpu), |
| BASE_TO_IRQ(NRF51_UART_BASE))); |
| |
| /* RNG */ |
| object_property_set_bool(OBJECT(&s->rng), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| |
| mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->rng), 0); |
| memory_region_add_subregion_overlap(&s->container, NRF51_RNG_BASE, mr, 0); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->rng), 0, |
| qdev_get_gpio_in(DEVICE(&s->cpu), |
| BASE_TO_IRQ(NRF51_RNG_BASE))); |
| |
| /* UICR, FICR, NVMC, FLASH */ |
| object_property_set_uint(OBJECT(&s->nvm), s->flash_size, "flash-size", |
| &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| |
| object_property_set_bool(OBJECT(&s->nvm), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| |
| mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->nvm), 0); |
| memory_region_add_subregion_overlap(&s->container, NRF51_NVMC_BASE, mr, 0); |
| mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->nvm), 1); |
| memory_region_add_subregion_overlap(&s->container, NRF51_FICR_BASE, mr, 0); |
| mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->nvm), 2); |
| memory_region_add_subregion_overlap(&s->container, NRF51_UICR_BASE, mr, 0); |
| mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->nvm), 3); |
| memory_region_add_subregion_overlap(&s->container, NRF51_FLASH_BASE, mr, 0); |
| |
| /* GPIO */ |
| object_property_set_bool(OBJECT(&s->gpio), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| |
| mr = sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->gpio), 0); |
| memory_region_add_subregion_overlap(&s->container, NRF51_GPIO_BASE, mr, 0); |
| |
| /* Pass all GPIOs to the SOC layer so they are available to the board */ |
| qdev_pass_gpios(DEVICE(&s->gpio), dev_soc, NULL); |
| |
| /* TIMER */ |
| for (i = 0; i < NRF51_NUM_TIMERS; i++) { |
| object_property_set_uint(OBJECT(&s->timer[i]), i, "id", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| object_property_set_bool(OBJECT(&s->timer[i]), true, "realized", &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| |
| base_addr = NRF51_TIMER_BASE + i * NRF51_PERIPHERAL_SIZE; |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->timer[i]), 0, base_addr); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->timer[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->cpu), |
| BASE_TO_IRQ(base_addr))); |
| } |
| |
| /* STUB Peripherals */ |
| memory_region_init_io(&s->clock, OBJECT(dev_soc), &clock_ops, NULL, |
| "nrf51_soc.clock", NRF51_PERIPHERAL_SIZE); |
| memory_region_add_subregion_overlap(&s->container, |
| NRF51_IOMEM_BASE, &s->clock, -1); |
| |
| create_unimplemented_device("nrf51_soc.io", NRF51_IOMEM_BASE, |
| NRF51_IOMEM_SIZE); |
| create_unimplemented_device("nrf51_soc.private", |
| NRF51_PRIVATE_BASE, NRF51_PRIVATE_SIZE); |
| } |
| |
| static void nrf51_soc_init(Object *obj) |
| { |
| uint8_t i = 0; |
| |
| NRF51State *s = NRF51_SOC(obj); |
| |
| memory_region_init(&s->container, obj, "nrf51-container", UINT64_MAX); |
| |
| sysbus_init_child_obj(OBJECT(s), "armv6m", OBJECT(&s->cpu), sizeof(s->cpu), |
| TYPE_ARMV7M); |
| qdev_prop_set_string(DEVICE(&s->cpu), "cpu-type", |
| ARM_CPU_TYPE_NAME("cortex-m0")); |
| qdev_prop_set_uint32(DEVICE(&s->cpu), "num-irq", 32); |
| |
| sysbus_init_child_obj(obj, "uart", &s->uart, sizeof(s->uart), |
| TYPE_NRF51_UART); |
| object_property_add_alias(obj, "serial0", OBJECT(&s->uart), "chardev"); |
| |
| sysbus_init_child_obj(obj, "rng", &s->rng, sizeof(s->rng), |
| TYPE_NRF51_RNG); |
| |
| sysbus_init_child_obj(obj, "nvm", &s->nvm, sizeof(s->nvm), TYPE_NRF51_NVM); |
| |
| sysbus_init_child_obj(obj, "gpio", &s->gpio, sizeof(s->gpio), |
| TYPE_NRF51_GPIO); |
| |
| for (i = 0; i < NRF51_NUM_TIMERS; i++) { |
| sysbus_init_child_obj(obj, "timer[*]", &s->timer[i], |
| sizeof(s->timer[i]), TYPE_NRF51_TIMER); |
| |
| } |
| } |
| |
| static Property nrf51_soc_properties[] = { |
| DEFINE_PROP_LINK("memory", NRF51State, board_memory, TYPE_MEMORY_REGION, |
| MemoryRegion *), |
| DEFINE_PROP_UINT32("sram-size", NRF51State, sram_size, NRF51822_SRAM_SIZE), |
| DEFINE_PROP_UINT32("flash-size", NRF51State, flash_size, |
| NRF51822_FLASH_SIZE), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void nrf51_soc_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = nrf51_soc_realize; |
| device_class_set_props(dc, nrf51_soc_properties); |
| } |
| |
| static const TypeInfo nrf51_soc_info = { |
| .name = TYPE_NRF51_SOC, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(NRF51State), |
| .instance_init = nrf51_soc_init, |
| .class_init = nrf51_soc_class_init, |
| }; |
| |
| static void nrf51_soc_types(void) |
| { |
| type_register_static(&nrf51_soc_info); |
| } |
| type_init(nrf51_soc_types) |