target/riscv/vector_internals.h - qemu - Git at Google

 /*
  * RISC-V Vector Extension Internals
  *
  * Copyright (c) 2020 T-Head Semiconductor Co., Ltd. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2 or later, as published by the Free Software Foundation.
  *
  * This program is distributed in the hope it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  * You should have received a copy of the GNU General Public License along with
  * this program.  If not, see <http://www.gnu.org/licenses/>.
  */

 #ifndef TARGET_RISCV_VECTOR_INTERNALS_H
 #define TARGET_RISCV_VECTOR_INTERNALS_H

 #include "qemu/bitops.h"
 #include "cpu.h"
 #include "tcg/tcg-gvec-desc.h"
 #include "internals.h"

 static inline uint32_t vext_nf(uint32_t desc)
 {
     return FIELD_EX32(simd_data(desc), VDATA, NF);
 }

 /*
  * Note that vector data is stored in host-endian 64-bit chunks,
  * so addressing units smaller than that needs a host-endian fixup.
  */
 #if HOST_BIG_ENDIAN
 #define H1(x)   ((x) ^ 7)
 #define H1_2(x) ((x) ^ 6)
 #define H1_4(x) ((x) ^ 4)
 #define H2(x)   ((x) ^ 3)
 #define H4(x)   ((x) ^ 1)
 #define H8(x)   ((x))
 #else
 #define H1(x)   (x)
 #define H1_2(x) (x)
 #define H1_4(x) (x)
 #define H2(x)   (x)
 #define H4(x)   (x)
 #define H8(x)   (x)
 #endif

 /*
  * Encode LMUL to lmul as following:
  *     LMUL    vlmul    lmul
  *      1       000       0
  *      2       001       1
  *      4       010       2
  *      8       011       3
  *      -       100       -
  *     1/8      101      -3
  *     1/4      110      -2
  *     1/2      111      -1
  */
 static inline int32_t vext_lmul(uint32_t desc)
 {
     return sextract32(FIELD_EX32(simd_data(desc), VDATA, LMUL), 0, 3);
 }

 static inline uint32_t vext_vm(uint32_t desc)
 {
     return FIELD_EX32(simd_data(desc), VDATA, VM);
 }

 static inline uint32_t vext_vma(uint32_t desc)
 {
     return FIELD_EX32(simd_data(desc), VDATA, VMA);
 }

 static inline uint32_t vext_vta(uint32_t desc)
 {
     return FIELD_EX32(simd_data(desc), VDATA, VTA);
 }

 static inline uint32_t vext_vta_all_1s(uint32_t desc)
 {
     return FIELD_EX32(simd_data(desc), VDATA, VTA_ALL_1S);
 }

 /*
  * Earlier designs (pre-0.9) had a varying number of bits
  * per mask value (MLEN). In the 0.9 design, MLEN=1.
  * (Section 4.5)
  */
 static inline int vext_elem_mask(void *v0, int index)
 {
     int idx = index / 64;
     int pos = index  % 64;
     return (((uint64_t *)v0)[idx] >> pos) & 1;
 }

 /*
  * Get number of total elements, including prestart, body and tail elements.
  * Note that when LMUL < 1, the tail includes the elements past VLMAX that
  * are held in the same vector register.
  */
 static inline uint32_t vext_get_total_elems(CPURISCVState *env, uint32_t desc,
                                             uint32_t esz)
 {
     uint32_t vlenb = simd_maxsz(desc);
     uint32_t sew = 1 << FIELD_EX64(env->vtype, VTYPE, VSEW);
     int8_t emul = ctzl(esz) - ctzl(sew) + vext_lmul(desc) < 0 ? 0 :
                   ctzl(esz) - ctzl(sew) + vext_lmul(desc);
     return (vlenb << emul) / esz;
 }

 /* set agnostic elements to 1s */
 void vext_set_elems_1s(void *base, uint32_t is_agnostic, uint32_t cnt,
                        uint32_t tot);

 /* expand macro args before macro */
 #define RVVCALL(macro, ...)  macro(__VA_ARGS__)

 /* (TD, T2, TX2) */
 #define OP_UU_B uint8_t, uint8_t, uint8_t
 #define OP_UU_H uint16_t, uint16_t, uint16_t
 #define OP_UU_W uint32_t, uint32_t, uint32_t
 #define OP_UU_D uint64_t, uint64_t, uint64_t

 /* (TD, T1, T2, TX1, TX2) */
 #define OP_UUU_B uint8_t, uint8_t, uint8_t, uint8_t, uint8_t
 #define OP_UUU_H uint16_t, uint16_t, uint16_t, uint16_t, uint16_t
 #define OP_UUU_W uint32_t, uint32_t, uint32_t, uint32_t, uint32_t
 #define OP_UUU_D uint64_t, uint64_t, uint64_t, uint64_t, uint64_t

 #define OPIVV1(NAME, TD, T2, TX2, HD, HS2, OP)         \
 static void do_##NAME(void *vd, void *vs2, int i)      \
 {                                                      \
     TX2 s2 = *((T2 *)vs2 + HS2(i));                    \
     *((TD *)vd + HD(i)) = OP(s2);                      \
 }

 #define GEN_VEXT_V(NAME, ESZ)                          \
 void HELPER(NAME)(void *vd, void *v0, void *vs2,       \
                   CPURISCVState *env, uint32_t desc)   \
 {                                                      \
     uint32_t vm = vext_vm(desc);                       \
     uint32_t vl = env->vl;                             \
     uint32_t total_elems =                             \
         vext_get_total_elems(env, desc, ESZ);          \
     uint32_t vta = vext_vta(desc);                     \
     uint32_t vma = vext_vma(desc);                     \
     uint32_t i;                                        \
                                                        \
     for (i = env->vstart; i < vl; i++) {               \
         if (!vm && !vext_elem_mask(v0, i)) {           \
             /* set masked-off elements to 1s */        \
             vext_set_elems_1s(vd, vma, i * ESZ,        \
                               (i + 1) * ESZ);          \
             continue;                                  \
         }                                              \
         do_##NAME(vd, vs2, i);                         \
     }                                                  \
     env->vstart = 0;                                   \
     /* set tail elements to 1s */                      \
     vext_set_elems_1s(vd, vta, vl * ESZ,               \
                       total_elems * ESZ);              \
 }

 /* operation of two vector elements */
 typedef void opivv2_fn(void *vd, void *vs1, void *vs2, int i);

 #define OPIVV2(NAME, TD, T1, T2, TX1, TX2, HD, HS1, HS2, OP)    \
 static void do_##NAME(void *vd, void *vs1, void *vs2, int i)    \
 {                                                               \
     TX1 s1 = *((T1 *)vs1 + HS1(i));                             \
     TX2 s2 = *((T2 *)vs2 + HS2(i));                             \
     *((TD *)vd + HD(i)) = OP(s2, s1);                           \
 }

 void do_vext_vv(void *vd, void *v0, void *vs1, void *vs2,
                 CPURISCVState *env, uint32_t desc,
                 opivv2_fn *fn, uint32_t esz);

 /* generate the helpers for OPIVV */
 #define GEN_VEXT_VV(NAME, ESZ)                            \
 void HELPER(NAME)(void *vd, void *v0, void *vs1,          \
                   void *vs2, CPURISCVState *env,          \
                   uint32_t desc)                          \
 {                                                         \
     do_vext_vv(vd, v0, vs1, vs2, env, desc,               \
                do_##NAME, ESZ);                           \
 }

 typedef void opivx2_fn(void *vd, target_long s1, void *vs2, int i);

 /*
  * (T1)s1 gives the real operator type.
  * (TX1)(T1)s1 expands the operator type of widen or narrow operations.
  */
 #define OPIVX2(NAME, TD, T1, T2, TX1, TX2, HD, HS2, OP)             \
 static void do_##NAME(void *vd, target_long s1, void *vs2, int i)   \
 {                                                                   \
     TX2 s2 = *((T2 *)vs2 + HS2(i));                                 \
     *((TD *)vd + HD(i)) = OP(s2, (TX1)(T1)s1);                      \
 }

 void do_vext_vx(void *vd, void *v0, target_long s1, void *vs2,
                 CPURISCVState *env, uint32_t desc,
                 opivx2_fn fn, uint32_t esz);

 /* generate the helpers for OPIVX */
 #define GEN_VEXT_VX(NAME, ESZ)                            \
 void HELPER(NAME)(void *vd, void *v0, target_ulong s1,    \
                   void *vs2, CPURISCVState *env,          \
                   uint32_t desc)                          \
 {                                                         \
     do_vext_vx(vd, v0, s1, vs2, env, desc,                \
                do_##NAME, ESZ);                           \
 }

 /* Three of the widening shortening macros: */
 /* (TD, T1, T2, TX1, TX2) */
 #define WOP_UUU_B uint16_t, uint8_t, uint8_t, uint16_t, uint16_t
 #define WOP_UUU_H uint32_t, uint16_t, uint16_t, uint32_t, uint32_t
 #define WOP_UUU_W uint64_t, uint32_t, uint32_t, uint64_t, uint64_t

 #endif /* TARGET_RISCV_VECTOR_INTERNALS_H */
	/*
	* RISC-V Vector Extension Internals
	*
	* Copyright (c) 2020 T-Head Semiconductor Co., Ltd. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms and conditions of the GNU General Public License,
	* version 2 or later, as published by the Free Software Foundation.
	*
	* This program is distributed in the hope it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*
	* You should have received a copy of the GNU General Public License along with
	* this program. If not, see <http://www.gnu.org/licenses/>.
	*/

	#ifndef TARGET_RISCV_VECTOR_INTERNALS_H
	#define TARGET_RISCV_VECTOR_INTERNALS_H

	#include "qemu/bitops.h"
	#include "cpu.h"
	#include "tcg/tcg-gvec-desc.h"
	#include "internals.h"

	static inline uint32_t vext_nf(uint32_t desc)
	{
	return FIELD_EX32(simd_data(desc), VDATA, NF);
	}

	/*
	* Note that vector data is stored in host-endian 64-bit chunks,
	* so addressing units smaller than that needs a host-endian fixup.
	*/
	#if HOST_BIG_ENDIAN
	#define H1(x) ((x) ^ 7)
	#define H1_2(x) ((x) ^ 6)
	#define H1_4(x) ((x) ^ 4)
	#define H2(x) ((x) ^ 3)
	#define H4(x) ((x) ^ 1)
	#define H8(x) ((x))
	#else
	#define H1(x) (x)
	#define H1_2(x) (x)
	#define H1_4(x) (x)
	#define H2(x) (x)
	#define H4(x) (x)
	#define H8(x) (x)
	#endif

	/*
	* Encode LMUL to lmul as following:
	* LMUL vlmul lmul
	* 1 000 0
	* 2 001 1
	* 4 010 2
	* 8 011 3
	* - 100 -
	* 1/8 101 -3
	* 1/4 110 -2
	* 1/2 111 -1
	*/
	static inline int32_t vext_lmul(uint32_t desc)
	{
	return sextract32(FIELD_EX32(simd_data(desc), VDATA, LMUL), 0, 3);
	}

	static inline uint32_t vext_vm(uint32_t desc)
	{
	return FIELD_EX32(simd_data(desc), VDATA, VM);
	}

	static inline uint32_t vext_vma(uint32_t desc)
	{
	return FIELD_EX32(simd_data(desc), VDATA, VMA);
	}

	static inline uint32_t vext_vta(uint32_t desc)
	{
	return FIELD_EX32(simd_data(desc), VDATA, VTA);
	}

	static inline uint32_t vext_vta_all_1s(uint32_t desc)
	{
	return FIELD_EX32(simd_data(desc), VDATA, VTA_ALL_1S);
	}

	/*
	* Earlier designs (pre-0.9) had a varying number of bits
	* per mask value (MLEN). In the 0.9 design, MLEN=1.
	* (Section 4.5)
	*/
	static inline int vext_elem_mask(void *v0, int index)
	{
	int idx = index / 64;
	int pos = index % 64;
	return (((uint64_t *)v0)[idx] >> pos) & 1;
	}

	/*
	* Get number of total elements, including prestart, body and tail elements.
	* Note that when LMUL < 1, the tail includes the elements past VLMAX that
	* are held in the same vector register.
	*/
	static inline uint32_t vext_get_total_elems(CPURISCVState *env, uint32_t desc,
	uint32_t esz)
	{
	uint32_t vlenb = simd_maxsz(desc);
	uint32_t sew = 1 << FIELD_EX64(env->vtype, VTYPE, VSEW);
	int8_t emul = ctzl(esz) - ctzl(sew) + vext_lmul(desc) < 0 ? 0 :
	ctzl(esz) - ctzl(sew) + vext_lmul(desc);
	return (vlenb << emul) / esz;
	}

	/* set agnostic elements to 1s */
	void vext_set_elems_1s(void *base, uint32_t is_agnostic, uint32_t cnt,
	uint32_t tot);

	/* expand macro args before macro */
	#define RVVCALL(macro, ...) macro(__VA_ARGS__)

	/* (TD, T2, TX2) */
	#define OP_UU_B uint8_t, uint8_t, uint8_t
	#define OP_UU_H uint16_t, uint16_t, uint16_t
	#define OP_UU_W uint32_t, uint32_t, uint32_t
	#define OP_UU_D uint64_t, uint64_t, uint64_t

	/* (TD, T1, T2, TX1, TX2) */
	#define OP_UUU_B uint8_t, uint8_t, uint8_t, uint8_t, uint8_t
	#define OP_UUU_H uint16_t, uint16_t, uint16_t, uint16_t, uint16_t
	#define OP_UUU_W uint32_t, uint32_t, uint32_t, uint32_t, uint32_t
	#define OP_UUU_D uint64_t, uint64_t, uint64_t, uint64_t, uint64_t

	#define OPIVV1(NAME, TD, T2, TX2, HD, HS2, OP) \
	static void do_##NAME(void vd, void vs2, int i) \
	{ \
	TX2 s2 = ((T2 )vs2 + HS2(i)); \
	((TD )vd + HD(i)) = OP(s2); \
	}

	#define GEN_VEXT_V(NAME, ESZ) \
	void HELPER(NAME)(void vd, void v0, void *vs2, \
	CPURISCVState *env, uint32_t desc) \
	{ \
	uint32_t vm = vext_vm(desc); \
	uint32_t vl = env->vl; \
	uint32_t total_elems = \
	vext_get_total_elems(env, desc, ESZ); \
	uint32_t vta = vext_vta(desc); \
	uint32_t vma = vext_vma(desc); \
	uint32_t i; \
	\
	for (i = env->vstart; i < vl; i++) { \
	if (!vm && !vext_elem_mask(v0, i)) { \
	/* set masked-off elements to 1s */ \
	vext_set_elems_1s(vd, vma, i * ESZ, \
	(i + 1) * ESZ); \
	continue; \
	} \
	do_##NAME(vd, vs2, i); \
	} \
	env->vstart = 0; \
	/* set tail elements to 1s */ \
	vext_set_elems_1s(vd, vta, vl * ESZ, \
	total_elems * ESZ); \
	}

	/* operation of two vector elements */
	typedef void opivv2_fn(void vd, void vs1, void *vs2, int i);

	#define OPIVV2(NAME, TD, T1, T2, TX1, TX2, HD, HS1, HS2, OP) \
	static void do_##NAME(void vd, void vs1, void *vs2, int i) \
	{ \
	TX1 s1 = ((T1 )vs1 + HS1(i)); \
	TX2 s2 = ((T2 )vs2 + HS2(i)); \
	((TD )vd + HD(i)) = OP(s2, s1); \
	}

	void do_vext_vv(void vd, void v0, void vs1, void vs2,
	CPURISCVState *env, uint32_t desc,
	opivv2_fn *fn, uint32_t esz);

	/* generate the helpers for OPIVV */
	#define GEN_VEXT_VV(NAME, ESZ) \
	void HELPER(NAME)(void vd, void v0, void *vs1, \
	void vs2, CPURISCVState env, \
	uint32_t desc) \
	{ \
	do_vext_vv(vd, v0, vs1, vs2, env, desc, \
	do_##NAME, ESZ); \
	}

	typedef void opivx2_fn(void vd, target_long s1, void vs2, int i);

	/*
	* (T1)s1 gives the real operator type.
	* (TX1)(T1)s1 expands the operator type of widen or narrow operations.
	*/
	#define OPIVX2(NAME, TD, T1, T2, TX1, TX2, HD, HS2, OP) \
	static void do_##NAME(void vd, target_long s1, void vs2, int i) \
	{ \
	TX2 s2 = ((T2 )vs2 + HS2(i)); \
	((TD )vd + HD(i)) = OP(s2, (TX1)(T1)s1); \
	}

	void do_vext_vx(void vd, void v0, target_long s1, void *vs2,
	CPURISCVState *env, uint32_t desc,
	opivx2_fn fn, uint32_t esz);

	/* generate the helpers for OPIVX */
	#define GEN_VEXT_VX(NAME, ESZ) \
	void HELPER(NAME)(void vd, void v0, target_ulong s1, \
	void vs2, CPURISCVState env, \
	uint32_t desc) \
	{ \
	do_vext_vx(vd, v0, s1, vs2, env, desc, \
	do_##NAME, ESZ); \
	}

	/* Three of the widening shortening macros: */
	/* (TD, T1, T2, TX1, TX2) */
	#define WOP_UUU_B uint16_t, uint8_t, uint8_t, uint16_t, uint16_t
	#define WOP_UUU_H uint32_t, uint16_t, uint16_t, uint32_t, uint32_t
	#define WOP_UUU_W uint64_t, uint32_t, uint32_t, uint64_t, uint64_t

	#endif /* TARGET_RISCV_VECTOR_INTERNALS_H */