|  | /* | 
|  | * Linux host USB redirector | 
|  | * | 
|  | * Copyright (c) 2005 Fabrice Bellard | 
|  | * | 
|  | * Copyright (c) 2008 Max Krasnyansky | 
|  | *      Support for host device auto connect & disconnect | 
|  | *      Major rewrite to support fully async operation | 
|  | * | 
|  | * Copyright 2008 TJ <linux@tjworld.net> | 
|  | *      Added flexible support for /dev/bus/usb /sys/bus/usb/devices in addition | 
|  | *      to the legacy /proc/bus/usb USB device discovery and handling | 
|  | * | 
|  | * (c) 2012 Gerd Hoffmann <kraxel@redhat.com> | 
|  | *      Completely rewritten to use libusb instead of usbfs ioctls. | 
|  | * | 
|  | * Permission is hereby granted, free of charge, to any person obtaining a copy | 
|  | * of this software and associated documentation files (the "Software"), to deal | 
|  | * in the Software without restriction, including without limitation the rights | 
|  | * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell | 
|  | * copies of the Software, and to permit persons to whom the Software is | 
|  | * furnished to do so, subject to the following conditions: | 
|  | * | 
|  | * The above copyright notice and this permission notice shall be included in | 
|  | * all copies or substantial portions of the Software. | 
|  | * | 
|  | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | 
|  | * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | 
|  | * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | 
|  | * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER | 
|  | * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, | 
|  | * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN | 
|  | * THE SOFTWARE. | 
|  | */ | 
|  |  | 
|  | #include "qemu/osdep.h" | 
|  | #include "qom/object.h" | 
|  | #ifndef CONFIG_WIN32 | 
|  | #include <poll.h> | 
|  | #endif | 
|  | #include <libusb.h> | 
|  |  | 
|  | #ifdef CONFIG_LINUX | 
|  | #include <sys/ioctl.h> | 
|  | #include <linux/usbdevice_fs.h> | 
|  | #endif | 
|  |  | 
|  | #include "qapi/error.h" | 
|  | #include "migration/vmstate.h" | 
|  | #include "monitor/monitor.h" | 
|  | #include "qemu/error-report.h" | 
|  | #include "qemu/main-loop.h" | 
|  | #include "qemu/module.h" | 
|  | #include "system/runstate.h" | 
|  | #include "system/system.h" | 
|  | #include "trace.h" | 
|  |  | 
|  | #include "hw/qdev-properties.h" | 
|  | #include "hw/usb.h" | 
|  |  | 
|  | /* ------------------------------------------------------------------------ */ | 
|  |  | 
|  | #define TYPE_USB_HOST_DEVICE "usb-host" | 
|  | OBJECT_DECLARE_SIMPLE_TYPE(USBHostDevice, USB_HOST_DEVICE) | 
|  |  | 
|  | typedef struct USBHostRequest USBHostRequest; | 
|  | typedef struct USBHostIsoXfer USBHostIsoXfer; | 
|  | typedef struct USBHostIsoRing USBHostIsoRing; | 
|  |  | 
|  | struct USBAutoFilter { | 
|  | uint32_t bus_num; | 
|  | uint32_t addr; | 
|  | char     *port; | 
|  | uint32_t vendor_id; | 
|  | uint32_t product_id; | 
|  | }; | 
|  |  | 
|  | enum USBHostDeviceOptions { | 
|  | USB_HOST_OPT_PIPELINE, | 
|  | }; | 
|  |  | 
|  | struct USBHostDevice { | 
|  | USBDevice parent_obj; | 
|  |  | 
|  | /* properties */ | 
|  | struct USBAutoFilter             match; | 
|  | char                             *hostdevice; | 
|  | int32_t                          bootindex; | 
|  | uint32_t                         iso_urb_count; | 
|  | uint32_t                         iso_urb_frames; | 
|  | uint32_t                         options; | 
|  | uint32_t                         loglevel; | 
|  | bool                             needs_autoscan; | 
|  | bool                             allow_one_guest_reset; | 
|  | bool                             allow_all_guest_resets; | 
|  | bool                             suppress_remote_wake; | 
|  |  | 
|  | /* state */ | 
|  | QTAILQ_ENTRY(USBHostDevice)      next; | 
|  | int                              seen, errcount; | 
|  | int                              bus_num; | 
|  | int                              addr; | 
|  | char                             port[16]; | 
|  |  | 
|  | int                              hostfd; | 
|  | libusb_device                    *dev; | 
|  | libusb_device_handle             *dh; | 
|  | struct libusb_device_descriptor  ddesc; | 
|  |  | 
|  | struct { | 
|  | bool                         detached; | 
|  | bool                         claimed; | 
|  | } ifs[USB_MAX_INTERFACES]; | 
|  |  | 
|  | /* callbacks & friends */ | 
|  | QEMUBH                           *bh_nodev; | 
|  | QEMUBH                           *bh_postld; | 
|  | bool                             bh_postld_pending; | 
|  | Notifier                         exit; | 
|  |  | 
|  | /* request queues */ | 
|  | QTAILQ_HEAD(, USBHostRequest)    requests; | 
|  | QTAILQ_HEAD(, USBHostIsoRing)    isorings; | 
|  | }; | 
|  |  | 
|  | struct USBHostRequest { | 
|  | USBHostDevice                    *host; | 
|  | USBPacket                        *p; | 
|  | bool                             in; | 
|  | struct libusb_transfer           *xfer; | 
|  | unsigned char                    *buffer; | 
|  | unsigned char                    *cbuf; | 
|  | unsigned int                     clen; | 
|  | bool                             usb3ep0quirk; | 
|  | QTAILQ_ENTRY(USBHostRequest)     next; | 
|  | }; | 
|  |  | 
|  | struct USBHostIsoXfer { | 
|  | USBHostIsoRing                   *ring; | 
|  | struct libusb_transfer           *xfer; | 
|  | bool                             copy_complete; | 
|  | unsigned int                     packet; | 
|  | QTAILQ_ENTRY(USBHostIsoXfer)     next; | 
|  | }; | 
|  |  | 
|  | struct USBHostIsoRing { | 
|  | USBHostDevice                    *host; | 
|  | USBEndpoint                      *ep; | 
|  | QTAILQ_HEAD(, USBHostIsoXfer)    unused; | 
|  | QTAILQ_HEAD(, USBHostIsoXfer)    inflight; | 
|  | QTAILQ_HEAD(, USBHostIsoXfer)    copy; | 
|  | QTAILQ_ENTRY(USBHostIsoRing)     next; | 
|  | }; | 
|  |  | 
|  | static QTAILQ_HEAD(, USBHostDevice) hostdevs = | 
|  | QTAILQ_HEAD_INITIALIZER(hostdevs); | 
|  |  | 
|  | static void usb_host_auto_check(void *unused); | 
|  | static void usb_host_release_interfaces(USBHostDevice *s); | 
|  | static void usb_host_nodev(USBHostDevice *s); | 
|  | static void usb_host_detach_kernel(USBHostDevice *s); | 
|  | static void usb_host_attach_kernel(USBHostDevice *s); | 
|  |  | 
|  | /* ------------------------------------------------------------------------ */ | 
|  |  | 
|  | #ifndef LIBUSB_LOG_LEVEL_WARNING /* older libusb didn't define these */ | 
|  | #define LIBUSB_LOG_LEVEL_WARNING 2 | 
|  | #endif | 
|  |  | 
|  | /* ------------------------------------------------------------------------ */ | 
|  |  | 
|  | #define CONTROL_TIMEOUT  10000        /* 10 sec    */ | 
|  | #define BULK_TIMEOUT         0        /* unlimited */ | 
|  | #define INTR_TIMEOUT         0        /* unlimited */ | 
|  |  | 
|  | #ifndef LIBUSB_API_VERSION | 
|  | # define LIBUSB_API_VERSION LIBUSBX_API_VERSION | 
|  | #endif | 
|  | #if LIBUSB_API_VERSION >= 0x01000103 | 
|  | # define HAVE_STREAMS 1 | 
|  | #endif | 
|  | #if LIBUSB_API_VERSION >= 0x01000106 | 
|  | # define HAVE_SUPER_PLUS 1 | 
|  | #endif | 
|  |  | 
|  | static const char *speed_name[] = { | 
|  | [LIBUSB_SPEED_UNKNOWN] = "?", | 
|  | [LIBUSB_SPEED_LOW]     = "1.5", | 
|  | [LIBUSB_SPEED_FULL]    = "12", | 
|  | [LIBUSB_SPEED_HIGH]    = "480", | 
|  | [LIBUSB_SPEED_SUPER]   = "5000", | 
|  | #ifdef HAVE_SUPER_PLUS | 
|  | [LIBUSB_SPEED_SUPER_PLUS] = "5000+", | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static const unsigned int speed_map[] = { | 
|  | [LIBUSB_SPEED_LOW]     = USB_SPEED_LOW, | 
|  | [LIBUSB_SPEED_FULL]    = USB_SPEED_FULL, | 
|  | [LIBUSB_SPEED_HIGH]    = USB_SPEED_HIGH, | 
|  | [LIBUSB_SPEED_SUPER]   = USB_SPEED_SUPER, | 
|  | #ifdef HAVE_SUPER_PLUS | 
|  | [LIBUSB_SPEED_SUPER_PLUS] = USB_SPEED_SUPER, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static const unsigned int status_map[] = { | 
|  | [LIBUSB_TRANSFER_COMPLETED] = USB_RET_SUCCESS, | 
|  | [LIBUSB_TRANSFER_ERROR]     = USB_RET_IOERROR, | 
|  | [LIBUSB_TRANSFER_TIMED_OUT] = USB_RET_IOERROR, | 
|  | [LIBUSB_TRANSFER_CANCELLED] = USB_RET_IOERROR, | 
|  | [LIBUSB_TRANSFER_STALL]     = USB_RET_STALL, | 
|  | [LIBUSB_TRANSFER_NO_DEVICE] = USB_RET_NODEV, | 
|  | [LIBUSB_TRANSFER_OVERFLOW]  = USB_RET_BABBLE, | 
|  | }; | 
|  |  | 
|  | static const char *err_names[] = { | 
|  | [-LIBUSB_ERROR_IO]               = "IO", | 
|  | [-LIBUSB_ERROR_INVALID_PARAM]    = "INVALID_PARAM", | 
|  | [-LIBUSB_ERROR_ACCESS]           = "ACCESS", | 
|  | [-LIBUSB_ERROR_NO_DEVICE]        = "NO_DEVICE", | 
|  | [-LIBUSB_ERROR_NOT_FOUND]        = "NOT_FOUND", | 
|  | [-LIBUSB_ERROR_BUSY]             = "BUSY", | 
|  | [-LIBUSB_ERROR_TIMEOUT]          = "TIMEOUT", | 
|  | [-LIBUSB_ERROR_OVERFLOW]         = "OVERFLOW", | 
|  | [-LIBUSB_ERROR_PIPE]             = "PIPE", | 
|  | [-LIBUSB_ERROR_INTERRUPTED]      = "INTERRUPTED", | 
|  | [-LIBUSB_ERROR_NO_MEM]           = "NO_MEM", | 
|  | [-LIBUSB_ERROR_NOT_SUPPORTED]    = "NOT_SUPPORTED", | 
|  | [-LIBUSB_ERROR_OTHER]            = "OTHER", | 
|  | }; | 
|  |  | 
|  | static libusb_context *ctx; | 
|  | static uint32_t loglevel; | 
|  |  | 
|  | #ifndef CONFIG_WIN32 | 
|  |  | 
|  | static void usb_host_handle_fd(void *opaque) | 
|  | { | 
|  | struct timeval tv = { 0, 0 }; | 
|  | libusb_handle_events_timeout(ctx, &tv); | 
|  | } | 
|  |  | 
|  | static void usb_host_add_fd(int fd, short events, void *user_data) | 
|  | { | 
|  | qemu_set_fd_handler(fd, | 
|  | (events & POLLIN)  ? usb_host_handle_fd : NULL, | 
|  | (events & POLLOUT) ? usb_host_handle_fd : NULL, | 
|  | ctx); | 
|  | } | 
|  |  | 
|  | static void usb_host_del_fd(int fd, void *user_data) | 
|  | { | 
|  | qemu_set_fd_handler(fd, NULL, NULL, NULL); | 
|  | } | 
|  |  | 
|  | #else | 
|  |  | 
|  | static QEMUTimer *poll_timer; | 
|  | static uint32_t request_count; | 
|  |  | 
|  | static void usb_host_timer_kick(void) | 
|  | { | 
|  | int64_t delay_ns; | 
|  |  | 
|  | delay_ns = request_count | 
|  | ? (NANOSECONDS_PER_SECOND / 100)  /* 10 ms interval with active req */ | 
|  | : (NANOSECONDS_PER_SECOND);       /* 1 sec interval otherwise */ | 
|  | timer_mod(poll_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + delay_ns); | 
|  | } | 
|  |  | 
|  | static void usb_host_timer(void *opaque) | 
|  | { | 
|  | struct timeval tv = { 0, 0 }; | 
|  |  | 
|  | libusb_handle_events_timeout(ctx, &tv); | 
|  | usb_host_timer_kick(); | 
|  | } | 
|  |  | 
|  | #endif /* !CONFIG_WIN32 */ | 
|  |  | 
|  | static int usb_host_init(void) | 
|  | { | 
|  | #ifndef CONFIG_WIN32 | 
|  | const struct libusb_pollfd **poll; | 
|  | #endif | 
|  | int rc; | 
|  |  | 
|  | if (ctx) { | 
|  | return 0; | 
|  | } | 
|  | rc = libusb_init(&ctx); | 
|  | if (rc != 0) { | 
|  | return -1; | 
|  | } | 
|  | #if LIBUSB_API_VERSION >= 0x01000106 | 
|  | libusb_set_option(ctx, LIBUSB_OPTION_LOG_LEVEL, loglevel); | 
|  | #else | 
|  | libusb_set_debug(ctx, loglevel); | 
|  | #endif | 
|  | #ifdef CONFIG_WIN32 | 
|  | poll_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, usb_host_timer, NULL); | 
|  | usb_host_timer_kick(); | 
|  | #else | 
|  | libusb_set_pollfd_notifiers(ctx, usb_host_add_fd, | 
|  | usb_host_del_fd, | 
|  | ctx); | 
|  | poll = libusb_get_pollfds(ctx); | 
|  | if (poll) { | 
|  | int i; | 
|  | for (i = 0; poll[i] != NULL; i++) { | 
|  | usb_host_add_fd(poll[i]->fd, poll[i]->events, ctx); | 
|  | } | 
|  | } | 
|  | free(poll); | 
|  | #endif | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int usb_host_get_port(libusb_device *dev, char *port, size_t len) | 
|  | { | 
|  | uint8_t path[7]; | 
|  | size_t off; | 
|  | int rc, i; | 
|  |  | 
|  | #if LIBUSB_API_VERSION >= 0x01000102 | 
|  | rc = libusb_get_port_numbers(dev, path, 7); | 
|  | #else | 
|  | rc = libusb_get_port_path(ctx, dev, path, 7); | 
|  | #endif | 
|  | if (rc < 0) { | 
|  | return 0; | 
|  | } | 
|  | off = snprintf(port, len, "%d", path[0]); | 
|  | for (i = 1; i < rc; i++) { | 
|  | off += snprintf(port+off, len-off, ".%d", path[i]); | 
|  | } | 
|  | return off; | 
|  | } | 
|  |  | 
|  | static void usb_host_libusb_error(const char *func, int rc) | 
|  | { | 
|  | const char *errname; | 
|  |  | 
|  | if (rc >= 0) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (-rc < ARRAY_SIZE(err_names) && err_names[-rc]) { | 
|  | errname = err_names[-rc]; | 
|  | } else { | 
|  | errname = "?"; | 
|  | } | 
|  | error_report("%s: %d [%s]", func, rc, errname); | 
|  | } | 
|  |  | 
|  | /* ------------------------------------------------------------------------ */ | 
|  |  | 
|  | static bool usb_host_use_combining(USBEndpoint *ep) | 
|  | { | 
|  | int type; | 
|  |  | 
|  | if (!ep->pipeline) { | 
|  | return false; | 
|  | } | 
|  | if (ep->pid != USB_TOKEN_IN) { | 
|  | return false; | 
|  | } | 
|  | type = usb_ep_get_type(ep->dev, ep->pid, ep->nr); | 
|  | if (type != USB_ENDPOINT_XFER_BULK) { | 
|  | return false; | 
|  | } | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* ------------------------------------------------------------------------ */ | 
|  |  | 
|  | static USBHostRequest *usb_host_req_alloc(USBHostDevice *s, USBPacket *p, | 
|  | bool in, size_t bufsize) | 
|  | { | 
|  | USBHostRequest *r = g_new0(USBHostRequest, 1); | 
|  |  | 
|  | r->host = s; | 
|  | r->p = p; | 
|  | r->in = in; | 
|  | r->xfer = libusb_alloc_transfer(0); | 
|  | if (bufsize) { | 
|  | r->buffer = g_malloc(bufsize); | 
|  | } | 
|  | QTAILQ_INSERT_TAIL(&s->requests, r, next); | 
|  | #ifdef CONFIG_WIN32 | 
|  | request_count++; | 
|  | usb_host_timer_kick(); | 
|  | #endif | 
|  | return r; | 
|  | } | 
|  |  | 
|  | static void usb_host_req_free(USBHostRequest *r) | 
|  | { | 
|  | #ifdef CONFIG_WIN32 | 
|  | request_count--; | 
|  | #endif | 
|  | QTAILQ_REMOVE(&r->host->requests, r, next); | 
|  | libusb_free_transfer(r->xfer); | 
|  | g_free(r->buffer); | 
|  | g_free(r); | 
|  | } | 
|  |  | 
|  | static USBHostRequest *usb_host_req_find(USBHostDevice *s, USBPacket *p) | 
|  | { | 
|  | USBHostRequest *r; | 
|  |  | 
|  | QTAILQ_FOREACH(r, &s->requests, next) { | 
|  | if (r->p == p) { | 
|  | return r; | 
|  | } | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void LIBUSB_CALL usb_host_req_complete_ctrl(struct libusb_transfer *xfer) | 
|  | { | 
|  | USBHostRequest *r = xfer->user_data; | 
|  | USBHostDevice  *s = r->host; | 
|  | bool disconnect = (xfer->status == LIBUSB_TRANSFER_NO_DEVICE); | 
|  |  | 
|  | if (r->p == NULL) { | 
|  | goto out; /* request was canceled */ | 
|  | } | 
|  |  | 
|  | r->p->status = status_map[xfer->status]; | 
|  | r->p->actual_length = xfer->actual_length; | 
|  | if (r->in && xfer->actual_length) { | 
|  | USBDevice *udev = USB_DEVICE(s); | 
|  | struct libusb_config_descriptor *conf = (void *)r->cbuf; | 
|  | memcpy(r->cbuf, r->buffer + 8, xfer->actual_length); | 
|  |  | 
|  | /* Fix up USB-3 ep0 maxpacket size to allow superspeed connected devices | 
|  | * to work redirected to a not superspeed capable hcd */ | 
|  | if (r->usb3ep0quirk && xfer->actual_length >= 18 && | 
|  | r->cbuf[7] == 9) { | 
|  | r->cbuf[7] = 64; | 
|  | } | 
|  | /* | 
|  | *If this is GET_DESCRIPTOR request for configuration descriptor, | 
|  | * remove 'remote wakeup' flag from it to prevent idle power down | 
|  | * in Windows guest | 
|  | */ | 
|  | if (s->suppress_remote_wake && | 
|  | udev->setup_buf[0] == USB_DIR_IN && | 
|  | udev->setup_buf[1] == USB_REQ_GET_DESCRIPTOR && | 
|  | udev->setup_buf[3] == USB_DT_CONFIG && udev->setup_buf[2] == 0 && | 
|  | xfer->actual_length > | 
|  | offsetof(struct libusb_config_descriptor, bmAttributes) && | 
|  | (conf->bmAttributes & USB_CFG_ATT_WAKEUP)) { | 
|  | trace_usb_host_remote_wakeup_removed(s->bus_num, s->addr); | 
|  | conf->bmAttributes &= ~USB_CFG_ATT_WAKEUP; | 
|  | } | 
|  | } | 
|  | trace_usb_host_req_complete(s->bus_num, s->addr, r->p, | 
|  | r->p->status, r->p->actual_length); | 
|  | usb_generic_async_ctrl_complete(USB_DEVICE(s), r->p); | 
|  |  | 
|  | out: | 
|  | usb_host_req_free(r); | 
|  | if (disconnect) { | 
|  | usb_host_nodev(s); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void LIBUSB_CALL usb_host_req_complete_data(struct libusb_transfer *xfer) | 
|  | { | 
|  | USBHostRequest *r = xfer->user_data; | 
|  | USBHostDevice  *s = r->host; | 
|  | bool disconnect = (xfer->status == LIBUSB_TRANSFER_NO_DEVICE); | 
|  |  | 
|  | if (r->p == NULL) { | 
|  | goto out; /* request was canceled */ | 
|  | } | 
|  |  | 
|  | r->p->status = status_map[xfer->status]; | 
|  | if (r->in && xfer->actual_length) { | 
|  | usb_packet_copy(r->p, r->buffer, xfer->actual_length); | 
|  | } | 
|  | trace_usb_host_req_complete(s->bus_num, s->addr, r->p, | 
|  | r->p->status, r->p->actual_length); | 
|  | if (usb_host_use_combining(r->p->ep)) { | 
|  | usb_combined_input_packet_complete(USB_DEVICE(s), r->p); | 
|  | } else { | 
|  | usb_packet_complete(USB_DEVICE(s), r->p); | 
|  | } | 
|  |  | 
|  | out: | 
|  | usb_host_req_free(r); | 
|  | if (disconnect) { | 
|  | usb_host_nodev(s); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usb_host_req_abort(USBHostRequest *r) | 
|  | { | 
|  | USBHostDevice  *s = r->host; | 
|  | bool inflight = (r->p && r->p->state == USB_PACKET_ASYNC); | 
|  |  | 
|  | if (inflight) { | 
|  | r->p->status = USB_RET_NODEV; | 
|  | trace_usb_host_req_complete(s->bus_num, s->addr, r->p, | 
|  | r->p->status, r->p->actual_length); | 
|  | if (r->p->ep->nr == 0) { | 
|  | usb_generic_async_ctrl_complete(USB_DEVICE(s), r->p); | 
|  | } else { | 
|  | usb_packet_complete(USB_DEVICE(s), r->p); | 
|  | } | 
|  | r->p = NULL; | 
|  |  | 
|  | libusb_cancel_transfer(r->xfer); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* ------------------------------------------------------------------------ */ | 
|  |  | 
|  | static void LIBUSB_CALL | 
|  | usb_host_req_complete_iso(struct libusb_transfer *transfer) | 
|  | { | 
|  | USBHostIsoXfer *xfer = transfer->user_data; | 
|  |  | 
|  | if (!xfer) { | 
|  | /* USBHostIsoXfer released while inflight */ | 
|  | g_free(transfer->buffer); | 
|  | libusb_free_transfer(transfer); | 
|  | return; | 
|  | } | 
|  |  | 
|  | QTAILQ_REMOVE(&xfer->ring->inflight, xfer, next); | 
|  | if (QTAILQ_EMPTY(&xfer->ring->inflight)) { | 
|  | USBHostDevice *s = xfer->ring->host; | 
|  | trace_usb_host_iso_stop(s->bus_num, s->addr, xfer->ring->ep->nr); | 
|  | } | 
|  | if (xfer->ring->ep->pid == USB_TOKEN_IN) { | 
|  | QTAILQ_INSERT_TAIL(&xfer->ring->copy, xfer, next); | 
|  | usb_wakeup(xfer->ring->ep, 0); | 
|  | } else { | 
|  | QTAILQ_INSERT_TAIL(&xfer->ring->unused, xfer, next); | 
|  | } | 
|  | } | 
|  |  | 
|  | static USBHostIsoRing *usb_host_iso_alloc(USBHostDevice *s, USBEndpoint *ep) | 
|  | { | 
|  | USBHostIsoRing *ring = g_new0(USBHostIsoRing, 1); | 
|  | USBHostIsoXfer *xfer; | 
|  | /* FIXME: check interval (for now assume one xfer per frame) */ | 
|  | int packets = s->iso_urb_frames; | 
|  | int i; | 
|  |  | 
|  | ring->host = s; | 
|  | ring->ep = ep; | 
|  | QTAILQ_INIT(&ring->unused); | 
|  | QTAILQ_INIT(&ring->inflight); | 
|  | QTAILQ_INIT(&ring->copy); | 
|  | QTAILQ_INSERT_TAIL(&s->isorings, ring, next); | 
|  |  | 
|  | for (i = 0; i < s->iso_urb_count; i++) { | 
|  | xfer = g_new0(USBHostIsoXfer, 1); | 
|  | xfer->ring = ring; | 
|  | xfer->xfer = libusb_alloc_transfer(packets); | 
|  | xfer->xfer->dev_handle = s->dh; | 
|  | xfer->xfer->type = LIBUSB_TRANSFER_TYPE_ISOCHRONOUS; | 
|  |  | 
|  | xfer->xfer->endpoint = ring->ep->nr; | 
|  | if (ring->ep->pid == USB_TOKEN_IN) { | 
|  | xfer->xfer->endpoint |= USB_DIR_IN; | 
|  | } | 
|  | xfer->xfer->callback = usb_host_req_complete_iso; | 
|  | xfer->xfer->user_data = xfer; | 
|  |  | 
|  | xfer->xfer->num_iso_packets = packets; | 
|  | xfer->xfer->length = ring->ep->max_packet_size * packets; | 
|  | xfer->xfer->buffer = g_malloc0(xfer->xfer->length); | 
|  |  | 
|  | QTAILQ_INSERT_TAIL(&ring->unused, xfer, next); | 
|  | } | 
|  |  | 
|  | return ring; | 
|  | } | 
|  |  | 
|  | static USBHostIsoRing *usb_host_iso_find(USBHostDevice *s, USBEndpoint *ep) | 
|  | { | 
|  | USBHostIsoRing *ring; | 
|  |  | 
|  | QTAILQ_FOREACH(ring, &s->isorings, next) { | 
|  | if (ring->ep == ep) { | 
|  | return ring; | 
|  | } | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static void usb_host_iso_reset_xfer(USBHostIsoXfer *xfer) | 
|  | { | 
|  | libusb_set_iso_packet_lengths(xfer->xfer, | 
|  | xfer->ring->ep->max_packet_size); | 
|  | xfer->packet = 0; | 
|  | xfer->copy_complete = false; | 
|  | } | 
|  |  | 
|  | static void usb_host_iso_free_xfer(USBHostIsoXfer *xfer, bool inflight) | 
|  | { | 
|  | if (inflight) { | 
|  | xfer->xfer->user_data = NULL; | 
|  | } else { | 
|  | g_free(xfer->xfer->buffer); | 
|  | libusb_free_transfer(xfer->xfer); | 
|  | } | 
|  | g_free(xfer); | 
|  | } | 
|  |  | 
|  | static void usb_host_iso_free(USBHostIsoRing *ring) | 
|  | { | 
|  | USBHostIsoXfer *xfer; | 
|  |  | 
|  | while ((xfer = QTAILQ_FIRST(&ring->inflight)) != NULL) { | 
|  | QTAILQ_REMOVE(&ring->inflight, xfer, next); | 
|  | usb_host_iso_free_xfer(xfer, true); | 
|  | } | 
|  | while ((xfer = QTAILQ_FIRST(&ring->unused)) != NULL) { | 
|  | QTAILQ_REMOVE(&ring->unused, xfer, next); | 
|  | usb_host_iso_free_xfer(xfer, false); | 
|  | } | 
|  | while ((xfer = QTAILQ_FIRST(&ring->copy)) != NULL) { | 
|  | QTAILQ_REMOVE(&ring->copy, xfer, next); | 
|  | usb_host_iso_free_xfer(xfer, false); | 
|  | } | 
|  |  | 
|  | QTAILQ_REMOVE(&ring->host->isorings, ring, next); | 
|  | g_free(ring); | 
|  | } | 
|  |  | 
|  | static void usb_host_iso_free_all(USBHostDevice *s) | 
|  | { | 
|  | USBHostIsoRing *ring; | 
|  |  | 
|  | while ((ring = QTAILQ_FIRST(&s->isorings)) != NULL) { | 
|  | usb_host_iso_free(ring); | 
|  | } | 
|  | } | 
|  |  | 
|  | static bool usb_host_iso_data_copy(USBHostIsoXfer *xfer, USBPacket *p) | 
|  | { | 
|  | unsigned int psize; | 
|  | unsigned char *buf; | 
|  |  | 
|  | buf = libusb_get_iso_packet_buffer_simple(xfer->xfer, xfer->packet); | 
|  | if (p->pid == USB_TOKEN_OUT) { | 
|  | psize = p->iov.size; | 
|  | if (psize > xfer->ring->ep->max_packet_size) { | 
|  | /* should not happen (guest bug) */ | 
|  | psize = xfer->ring->ep->max_packet_size; | 
|  | } | 
|  | xfer->xfer->iso_packet_desc[xfer->packet].length = psize; | 
|  | } else { | 
|  | psize = xfer->xfer->iso_packet_desc[xfer->packet].actual_length; | 
|  | if (psize > p->iov.size) { | 
|  | /* should not happen (guest bug) */ | 
|  | psize = p->iov.size; | 
|  | } | 
|  | } | 
|  | usb_packet_copy(p, buf, psize); | 
|  | xfer->packet++; | 
|  | xfer->copy_complete = (xfer->packet == xfer->xfer->num_iso_packets); | 
|  | return xfer->copy_complete; | 
|  | } | 
|  |  | 
|  | static void usb_host_iso_data_in(USBHostDevice *s, USBPacket *p) | 
|  | { | 
|  | USBHostIsoRing *ring; | 
|  | USBHostIsoXfer *xfer; | 
|  | bool disconnect = false; | 
|  | int rc; | 
|  |  | 
|  | ring = usb_host_iso_find(s, p->ep); | 
|  | if (ring == NULL) { | 
|  | ring = usb_host_iso_alloc(s, p->ep); | 
|  | } | 
|  |  | 
|  | /* copy data to guest */ | 
|  | xfer = QTAILQ_FIRST(&ring->copy); | 
|  | if (xfer != NULL) { | 
|  | if (usb_host_iso_data_copy(xfer, p)) { | 
|  | QTAILQ_REMOVE(&ring->copy, xfer, next); | 
|  | QTAILQ_INSERT_TAIL(&ring->unused, xfer, next); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* submit empty bufs to host */ | 
|  | while ((xfer = QTAILQ_FIRST(&ring->unused)) != NULL) { | 
|  | QTAILQ_REMOVE(&ring->unused, xfer, next); | 
|  | usb_host_iso_reset_xfer(xfer); | 
|  | rc = libusb_submit_transfer(xfer->xfer); | 
|  | if (rc != 0) { | 
|  | usb_host_libusb_error("libusb_submit_transfer [iso]", rc); | 
|  | QTAILQ_INSERT_TAIL(&ring->unused, xfer, next); | 
|  | if (rc == LIBUSB_ERROR_NO_DEVICE) { | 
|  | disconnect = true; | 
|  | } | 
|  | break; | 
|  | } | 
|  | if (QTAILQ_EMPTY(&ring->inflight)) { | 
|  | trace_usb_host_iso_start(s->bus_num, s->addr, p->ep->nr); | 
|  | } | 
|  | QTAILQ_INSERT_TAIL(&ring->inflight, xfer, next); | 
|  | } | 
|  |  | 
|  | if (disconnect) { | 
|  | usb_host_nodev(s); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usb_host_iso_data_out(USBHostDevice *s, USBPacket *p) | 
|  | { | 
|  | USBHostIsoRing *ring; | 
|  | USBHostIsoXfer *xfer; | 
|  | bool disconnect = false; | 
|  | int rc, filled = 0; | 
|  |  | 
|  | ring = usb_host_iso_find(s, p->ep); | 
|  | if (ring == NULL) { | 
|  | ring = usb_host_iso_alloc(s, p->ep); | 
|  | } | 
|  |  | 
|  | /* copy data from guest */ | 
|  | xfer = QTAILQ_FIRST(&ring->copy); | 
|  | while (xfer != NULL && xfer->copy_complete) { | 
|  | filled++; | 
|  | xfer = QTAILQ_NEXT(xfer, next); | 
|  | } | 
|  | if (xfer == NULL) { | 
|  | xfer = QTAILQ_FIRST(&ring->unused); | 
|  | if (xfer == NULL) { | 
|  | trace_usb_host_iso_out_of_bufs(s->bus_num, s->addr, p->ep->nr); | 
|  | return; | 
|  | } | 
|  | QTAILQ_REMOVE(&ring->unused, xfer, next); | 
|  | usb_host_iso_reset_xfer(xfer); | 
|  | QTAILQ_INSERT_TAIL(&ring->copy, xfer, next); | 
|  | } | 
|  | usb_host_iso_data_copy(xfer, p); | 
|  |  | 
|  | if (QTAILQ_EMPTY(&ring->inflight)) { | 
|  | /* wait until half of our buffers are filled | 
|  | before kicking the iso out stream */ | 
|  | if (filled*2 < s->iso_urb_count) { | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* submit filled bufs to host */ | 
|  | while ((xfer = QTAILQ_FIRST(&ring->copy)) != NULL && | 
|  | xfer->copy_complete) { | 
|  | QTAILQ_REMOVE(&ring->copy, xfer, next); | 
|  | rc = libusb_submit_transfer(xfer->xfer); | 
|  | if (rc != 0) { | 
|  | usb_host_libusb_error("libusb_submit_transfer [iso]", rc); | 
|  | QTAILQ_INSERT_TAIL(&ring->unused, xfer, next); | 
|  | if (rc == LIBUSB_ERROR_NO_DEVICE) { | 
|  | disconnect = true; | 
|  | } | 
|  | break; | 
|  | } | 
|  | if (QTAILQ_EMPTY(&ring->inflight)) { | 
|  | trace_usb_host_iso_start(s->bus_num, s->addr, p->ep->nr); | 
|  | } | 
|  | QTAILQ_INSERT_TAIL(&ring->inflight, xfer, next); | 
|  | } | 
|  |  | 
|  | if (disconnect) { | 
|  | usb_host_nodev(s); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* ------------------------------------------------------------------------ */ | 
|  |  | 
|  | static void usb_host_speed_compat(USBHostDevice *s) | 
|  | { | 
|  | USBDevice *udev = USB_DEVICE(s); | 
|  | struct libusb_config_descriptor *conf; | 
|  | const struct libusb_interface_descriptor *intf; | 
|  | const struct libusb_endpoint_descriptor *endp; | 
|  | #ifdef HAVE_STREAMS | 
|  | struct libusb_ss_endpoint_companion_descriptor *endp_ss_comp; | 
|  | #endif | 
|  | bool compat_high = true; | 
|  | bool compat_full = true; | 
|  | uint8_t type; | 
|  | int rc, c, i, a, e; | 
|  |  | 
|  | for (c = 0;; c++) { | 
|  | rc = libusb_get_config_descriptor(s->dev, c, &conf); | 
|  | if (rc != 0) { | 
|  | break; | 
|  | } | 
|  | for (i = 0; i < conf->bNumInterfaces; i++) { | 
|  | for (a = 0; a < conf->interface[i].num_altsetting; a++) { | 
|  | intf = &conf->interface[i].altsetting[a]; | 
|  |  | 
|  | if (intf->bInterfaceClass == LIBUSB_CLASS_MASS_STORAGE && | 
|  | intf->bInterfaceSubClass == 6) { /* SCSI */ | 
|  | udev->flags |= (1 << USB_DEV_FLAG_IS_SCSI_STORAGE); | 
|  | break; | 
|  | } | 
|  |  | 
|  | for (e = 0; e < intf->bNumEndpoints; e++) { | 
|  | endp = &intf->endpoint[e]; | 
|  | type = endp->bmAttributes & 0x3; | 
|  | switch (type) { | 
|  | case 0x01: /* ISO */ | 
|  | compat_full = false; | 
|  | compat_high = false; | 
|  | break; | 
|  | case 0x02: /* BULK */ | 
|  | #ifdef HAVE_STREAMS | 
|  | rc = libusb_get_ss_endpoint_companion_descriptor | 
|  | (ctx, endp, &endp_ss_comp); | 
|  | if (rc == LIBUSB_SUCCESS) { | 
|  | int streams = endp_ss_comp->bmAttributes & 0x1f; | 
|  | if (streams) { | 
|  | compat_full = false; | 
|  | compat_high = false; | 
|  | } | 
|  | libusb_free_ss_endpoint_companion_descriptor | 
|  | (endp_ss_comp); | 
|  | } | 
|  | #endif | 
|  | break; | 
|  | case 0x03: /* INTERRUPT */ | 
|  | if (endp->wMaxPacketSize > 64) { | 
|  | compat_full = false; | 
|  | } | 
|  | if (endp->wMaxPacketSize > 1024) { | 
|  | compat_high = false; | 
|  | } | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  | libusb_free_config_descriptor(conf); | 
|  | } | 
|  |  | 
|  | udev->speedmask = (1 << udev->speed); | 
|  | if (udev->speed == USB_SPEED_SUPER && compat_high) { | 
|  | udev->speedmask |= USB_SPEED_MASK_HIGH; | 
|  | } | 
|  | if (udev->speed == USB_SPEED_SUPER && compat_full) { | 
|  | udev->speedmask |= USB_SPEED_MASK_FULL; | 
|  | } | 
|  | if (udev->speed == USB_SPEED_HIGH && compat_full) { | 
|  | udev->speedmask |= USB_SPEED_MASK_FULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usb_host_ep_update(USBHostDevice *s) | 
|  | { | 
|  | static const char *tname[] = { | 
|  | [USB_ENDPOINT_XFER_CONTROL] = "control", | 
|  | [USB_ENDPOINT_XFER_ISOC]    = "isoc", | 
|  | [USB_ENDPOINT_XFER_BULK]    = "bulk", | 
|  | [USB_ENDPOINT_XFER_INT]     = "int", | 
|  | }; | 
|  | USBDevice *udev = USB_DEVICE(s); | 
|  | struct libusb_config_descriptor *conf; | 
|  | const struct libusb_interface_descriptor *intf; | 
|  | const struct libusb_endpoint_descriptor *endp; | 
|  | #ifdef HAVE_STREAMS | 
|  | struct libusb_ss_endpoint_companion_descriptor *endp_ss_comp; | 
|  | #endif | 
|  | uint8_t devep, type; | 
|  | int pid, ep, alt; | 
|  | int rc, i, e; | 
|  |  | 
|  | usb_ep_reset(udev); | 
|  | rc = libusb_get_active_config_descriptor(s->dev, &conf); | 
|  | if (rc != 0) { | 
|  | return; | 
|  | } | 
|  | trace_usb_host_parse_config(s->bus_num, s->addr, | 
|  | conf->bConfigurationValue, true); | 
|  |  | 
|  | for (i = 0; i < conf->bNumInterfaces; i++) { | 
|  | /* | 
|  | * The udev->altsetting array indexes alternate settings | 
|  | * by the interface number. Get the 0th alternate setting | 
|  | * first so that we can grab the interface number, and | 
|  | * then correct the alternate setting value if necessary. | 
|  | */ | 
|  | intf = &conf->interface[i].altsetting[0]; | 
|  | alt = udev->altsetting[intf->bInterfaceNumber]; | 
|  |  | 
|  | if (alt != 0) { | 
|  | assert(alt < conf->interface[i].num_altsetting); | 
|  | intf = &conf->interface[i].altsetting[alt]; | 
|  | } | 
|  |  | 
|  | trace_usb_host_parse_interface(s->bus_num, s->addr, | 
|  | intf->bInterfaceNumber, | 
|  | intf->bAlternateSetting, true); | 
|  | for (e = 0; e < intf->bNumEndpoints; e++) { | 
|  | endp = &intf->endpoint[e]; | 
|  |  | 
|  | devep = endp->bEndpointAddress; | 
|  | pid = (devep & USB_DIR_IN) ? USB_TOKEN_IN : USB_TOKEN_OUT; | 
|  | ep = devep & 0xf; | 
|  | type = endp->bmAttributes & 0x3; | 
|  |  | 
|  | if (ep == 0) { | 
|  | trace_usb_host_parse_error(s->bus_num, s->addr, | 
|  | "invalid endpoint address"); | 
|  | return; | 
|  | } | 
|  | if (usb_ep_get_type(udev, pid, ep) != USB_ENDPOINT_XFER_INVALID) { | 
|  | trace_usb_host_parse_error(s->bus_num, s->addr, | 
|  | "duplicate endpoint address"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | trace_usb_host_parse_endpoint(s->bus_num, s->addr, ep, | 
|  | (devep & USB_DIR_IN) ? "in" : "out", | 
|  | tname[type], true); | 
|  | usb_ep_set_max_packet_size(udev, pid, ep, | 
|  | endp->wMaxPacketSize); | 
|  | usb_ep_set_type(udev, pid, ep, type); | 
|  | usb_ep_set_ifnum(udev, pid, ep, i); | 
|  | usb_ep_set_halted(udev, pid, ep, 0); | 
|  | #ifdef HAVE_STREAMS | 
|  | if (type == LIBUSB_TRANSFER_TYPE_BULK && | 
|  | libusb_get_ss_endpoint_companion_descriptor(ctx, endp, | 
|  | &endp_ss_comp) == LIBUSB_SUCCESS) { | 
|  | usb_ep_set_max_streams(udev, pid, ep, | 
|  | endp_ss_comp->bmAttributes); | 
|  | libusb_free_ss_endpoint_companion_descriptor(endp_ss_comp); | 
|  | } | 
|  | #endif | 
|  | } | 
|  | } | 
|  |  | 
|  | libusb_free_config_descriptor(conf); | 
|  | } | 
|  |  | 
|  | static int usb_host_open(USBHostDevice *s, libusb_device *dev, int hostfd) | 
|  | { | 
|  | USBDevice *udev = USB_DEVICE(s); | 
|  | int libusb_speed; | 
|  | int bus_num = 0; | 
|  | int addr = 0; | 
|  | int rc; | 
|  | Error *local_err = NULL; | 
|  |  | 
|  | if (s->bh_postld_pending) { | 
|  | return -1; | 
|  | } | 
|  | if (s->dh != NULL) { | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | if (dev) { | 
|  | bus_num = libusb_get_bus_number(dev); | 
|  | addr = libusb_get_device_address(dev); | 
|  | trace_usb_host_open_started(bus_num, addr); | 
|  |  | 
|  | rc = libusb_open(dev, &s->dh); | 
|  | if (rc != 0) { | 
|  | goto fail; | 
|  | } | 
|  | } else { | 
|  | #if LIBUSB_API_VERSION >= 0x01000107 && !defined(CONFIG_WIN32) | 
|  | trace_usb_host_open_hostfd(hostfd); | 
|  |  | 
|  | rc = libusb_wrap_sys_device(ctx, hostfd, &s->dh); | 
|  | if (rc != 0) { | 
|  | goto fail; | 
|  | } | 
|  | s->hostfd  = hostfd; | 
|  | dev = libusb_get_device(s->dh); | 
|  | bus_num = libusb_get_bus_number(dev); | 
|  | addr = libusb_get_device_address(dev); | 
|  | #else | 
|  | g_assert_not_reached(); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | s->dev     = dev; | 
|  | s->bus_num = bus_num; | 
|  | s->addr    = addr; | 
|  |  | 
|  | usb_host_detach_kernel(s); | 
|  |  | 
|  | libusb_get_device_descriptor(dev, &s->ddesc); | 
|  | usb_host_get_port(s->dev, s->port, sizeof(s->port)); | 
|  |  | 
|  | usb_ep_init(udev); | 
|  | usb_host_ep_update(s); | 
|  |  | 
|  | libusb_speed = libusb_get_device_speed(dev); | 
|  | #if LIBUSB_API_VERSION >= 0x01000107 && defined(CONFIG_LINUX) && \ | 
|  | defined(USBDEVFS_GET_SPEED) | 
|  | if (hostfd && libusb_speed == 0) { | 
|  | /* | 
|  | * Workaround libusb bug: libusb_get_device_speed() does not | 
|  | * work for libusb_wrap_sys_device() devices in v1.0.23. | 
|  | * | 
|  | * Speeds are defined in linux/usb/ch9.h, file not included | 
|  | * due to name conflicts. | 
|  | */ | 
|  | rc = ioctl(hostfd, USBDEVFS_GET_SPEED, NULL); | 
|  | switch (rc) { | 
|  | case 1: /* low */ | 
|  | libusb_speed = LIBUSB_SPEED_LOW; | 
|  | break; | 
|  | case 2: /* full */ | 
|  | libusb_speed = LIBUSB_SPEED_FULL; | 
|  | break; | 
|  | case 3: /* high */ | 
|  | case 4: /* wireless */ | 
|  | libusb_speed = LIBUSB_SPEED_HIGH; | 
|  | break; | 
|  | case 5: /* super */ | 
|  | libusb_speed = LIBUSB_SPEED_SUPER; | 
|  | break; | 
|  | case 6: /* super plus */ | 
|  | #ifdef HAVE_SUPER_PLUS | 
|  | libusb_speed = LIBUSB_SPEED_SUPER_PLUS; | 
|  | #else | 
|  | libusb_speed = LIBUSB_SPEED_SUPER; | 
|  | #endif | 
|  | break; | 
|  | } | 
|  | } | 
|  | #endif | 
|  | udev->speed = speed_map[libusb_speed]; | 
|  | usb_host_speed_compat(s); | 
|  |  | 
|  | if (s->ddesc.iProduct) { | 
|  | libusb_get_string_descriptor_ascii(s->dh, s->ddesc.iProduct, | 
|  | (unsigned char *)udev->product_desc, | 
|  | sizeof(udev->product_desc)); | 
|  | } else { | 
|  | snprintf(udev->product_desc, sizeof(udev->product_desc), | 
|  | "host:%d.%d", bus_num, addr); | 
|  | } | 
|  |  | 
|  | usb_device_attach(udev, &local_err); | 
|  | if (local_err) { | 
|  | error_report_err(local_err); | 
|  | goto fail; | 
|  | } | 
|  |  | 
|  | trace_usb_host_open_success(bus_num, addr); | 
|  | return 0; | 
|  |  | 
|  | fail: | 
|  | trace_usb_host_open_failure(bus_num, addr); | 
|  | if (s->dh != NULL) { | 
|  | usb_host_release_interfaces(s); | 
|  | libusb_reset_device(s->dh); | 
|  | usb_host_attach_kernel(s); | 
|  | libusb_close(s->dh); | 
|  | s->dh = NULL; | 
|  | s->dev = NULL; | 
|  | } | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | static void usb_host_abort_xfers(USBHostDevice *s) | 
|  | { | 
|  | USBHostRequest *r, *rtmp; | 
|  | int limit = 100; | 
|  |  | 
|  | QTAILQ_FOREACH_SAFE(r, &s->requests, next, rtmp) { | 
|  | usb_host_req_abort(r); | 
|  | } | 
|  |  | 
|  | while (QTAILQ_FIRST(&s->requests) != NULL) { | 
|  | struct timeval tv; | 
|  | memset(&tv, 0, sizeof(tv)); | 
|  | tv.tv_usec = 2500; | 
|  | libusb_handle_events_timeout(ctx, &tv); | 
|  | if (--limit == 0) { | 
|  | /* | 
|  | * Don't wait forever for libusb calling the complete | 
|  | * callback (which will unlink and free the request). | 
|  | * | 
|  | * Leaking memory here, to make sure libusb will not | 
|  | * access memory which we have released already. | 
|  | */ | 
|  | QTAILQ_FOREACH_SAFE(r, &s->requests, next, rtmp) { | 
|  | QTAILQ_REMOVE(&s->requests, r, next); | 
|  | } | 
|  | return; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int usb_host_close(USBHostDevice *s) | 
|  | { | 
|  | USBDevice *udev = USB_DEVICE(s); | 
|  |  | 
|  | if (s->dh == NULL) { | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | trace_usb_host_close(s->bus_num, s->addr); | 
|  |  | 
|  | usb_host_abort_xfers(s); | 
|  | usb_host_iso_free_all(s); | 
|  |  | 
|  | if (udev->attached) { | 
|  | usb_device_detach(udev); | 
|  | } | 
|  |  | 
|  | usb_host_release_interfaces(s); | 
|  | libusb_reset_device(s->dh); | 
|  | usb_host_attach_kernel(s); | 
|  | libusb_close(s->dh); | 
|  | s->dh = NULL; | 
|  | s->dev = NULL; | 
|  |  | 
|  | if (s->hostfd != -1) { | 
|  | close(s->hostfd); | 
|  | s->hostfd = -1; | 
|  | } | 
|  |  | 
|  | usb_host_auto_check(NULL); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void usb_host_nodev_bh(void *opaque) | 
|  | { | 
|  | USBHostDevice *s = opaque; | 
|  | usb_host_close(s); | 
|  | } | 
|  |  | 
|  | static void usb_host_nodev(USBHostDevice *s) | 
|  | { | 
|  | if (!s->bh_nodev) { | 
|  | s->bh_nodev = qemu_bh_new_guarded(usb_host_nodev_bh, s, | 
|  | &DEVICE(s)->mem_reentrancy_guard); | 
|  | } | 
|  | qemu_bh_schedule(s->bh_nodev); | 
|  | } | 
|  |  | 
|  | static void usb_host_exit_notifier(struct Notifier *n, void *data) | 
|  | { | 
|  | USBHostDevice *s = container_of(n, USBHostDevice, exit); | 
|  |  | 
|  | if (s->dh) { | 
|  | usb_host_abort_xfers(s); | 
|  | usb_host_release_interfaces(s); | 
|  | libusb_reset_device(s->dh); | 
|  | usb_host_attach_kernel(s); | 
|  | libusb_close(s->dh); | 
|  | } | 
|  | } | 
|  |  | 
|  | static libusb_device *usb_host_find_ref(int bus, int addr) | 
|  | { | 
|  | libusb_device **devs = NULL; | 
|  | libusb_device *ret = NULL; | 
|  | int i, n; | 
|  |  | 
|  | n = libusb_get_device_list(ctx, &devs); | 
|  | for (i = 0; i < n; i++) { | 
|  | if (libusb_get_bus_number(devs[i]) == bus && | 
|  | libusb_get_device_address(devs[i]) == addr) { | 
|  | ret = libusb_ref_device(devs[i]); | 
|  | break; | 
|  | } | 
|  | } | 
|  | libusb_free_device_list(devs, 1); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void usb_host_realize(USBDevice *udev, Error **errp) | 
|  | { | 
|  | USBHostDevice *s = USB_HOST_DEVICE(udev); | 
|  | libusb_device *ldev; | 
|  | int rc; | 
|  |  | 
|  | if (usb_host_init() != 0) { | 
|  | error_setg(errp, "failed to init libusb"); | 
|  | return; | 
|  | } | 
|  | if (s->match.vendor_id > 0xffff) { | 
|  | error_setg(errp, "vendorid out of range"); | 
|  | return; | 
|  | } | 
|  | if (s->match.product_id > 0xffff) { | 
|  | error_setg(errp, "productid out of range"); | 
|  | return; | 
|  | } | 
|  | if (s->match.addr > 127) { | 
|  | error_setg(errp, "hostaddr out of range"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | loglevel = s->loglevel; | 
|  | udev->flags |= (1 << USB_DEV_FLAG_IS_HOST); | 
|  | udev->auto_attach = 0; | 
|  | QTAILQ_INIT(&s->requests); | 
|  | QTAILQ_INIT(&s->isorings); | 
|  | s->hostfd = -1; | 
|  |  | 
|  | #if LIBUSB_API_VERSION >= 0x01000107 && !defined(CONFIG_WIN32) | 
|  | if (s->hostdevice) { | 
|  | int fd; | 
|  | s->needs_autoscan = false; | 
|  | fd = qemu_open(s->hostdevice, O_RDWR, errp); | 
|  | if (fd < 0) { | 
|  | return; | 
|  | } | 
|  | rc = usb_host_open(s, NULL, fd); | 
|  | if (rc < 0) { | 
|  | error_setg(errp, "failed to open host usb device %s", s->hostdevice); | 
|  | return; | 
|  | } | 
|  | } else | 
|  | #endif | 
|  | if (s->match.addr && s->match.bus_num && | 
|  | !s->match.vendor_id && | 
|  | !s->match.product_id && | 
|  | !s->match.port) { | 
|  | s->needs_autoscan = false; | 
|  | ldev = usb_host_find_ref(s->match.bus_num, | 
|  | s->match.addr); | 
|  | if (!ldev) { | 
|  | error_setg(errp, "failed to find host usb device %d:%d", | 
|  | s->match.bus_num, s->match.addr); | 
|  | return; | 
|  | } | 
|  | rc = usb_host_open(s, ldev, 0); | 
|  | libusb_unref_device(ldev); | 
|  | if (rc < 0) { | 
|  | error_setg(errp, "failed to open host usb device %d:%d", | 
|  | s->match.bus_num, s->match.addr); | 
|  | return; | 
|  | } | 
|  | } else { | 
|  | s->needs_autoscan = true; | 
|  | QTAILQ_INSERT_TAIL(&hostdevs, s, next); | 
|  | usb_host_auto_check(NULL); | 
|  | } | 
|  |  | 
|  | s->exit.notify = usb_host_exit_notifier; | 
|  | qemu_add_exit_notifier(&s->exit); | 
|  | } | 
|  |  | 
|  | static void usb_host_instance_init(Object *obj) | 
|  | { | 
|  | USBDevice *udev = USB_DEVICE(obj); | 
|  | USBHostDevice *s = USB_HOST_DEVICE(udev); | 
|  |  | 
|  | device_add_bootindex_property(obj, &s->bootindex, | 
|  | "bootindex", NULL, | 
|  | &udev->qdev); | 
|  | } | 
|  |  | 
|  | static void usb_host_unrealize(USBDevice *udev) | 
|  | { | 
|  | USBHostDevice *s = USB_HOST_DEVICE(udev); | 
|  |  | 
|  | qemu_remove_exit_notifier(&s->exit); | 
|  | if (s->needs_autoscan) { | 
|  | QTAILQ_REMOVE(&hostdevs, s, next); | 
|  | } | 
|  | usb_host_close(s); | 
|  | } | 
|  |  | 
|  | static void usb_host_cancel_packet(USBDevice *udev, USBPacket *p) | 
|  | { | 
|  | USBHostDevice *s = USB_HOST_DEVICE(udev); | 
|  | USBHostRequest *r; | 
|  |  | 
|  | if (p->combined) { | 
|  | usb_combined_packet_cancel(udev, p); | 
|  | return; | 
|  | } | 
|  |  | 
|  | trace_usb_host_req_canceled(s->bus_num, s->addr, p); | 
|  |  | 
|  | r = usb_host_req_find(s, p); | 
|  | if (r && r->p) { | 
|  | r->p = NULL; /* mark as dead */ | 
|  | libusb_cancel_transfer(r->xfer); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usb_host_detach_kernel(USBHostDevice *s) | 
|  | { | 
|  | struct libusb_config_descriptor *conf; | 
|  | int rc, i; | 
|  |  | 
|  | rc = libusb_get_active_config_descriptor(s->dev, &conf); | 
|  | if (rc != 0) { | 
|  | return; | 
|  | } | 
|  | for (i = 0; i < USB_MAX_INTERFACES; i++) { | 
|  | rc = libusb_kernel_driver_active(s->dh, i); | 
|  | usb_host_libusb_error("libusb_kernel_driver_active", rc); | 
|  | if (rc != 1) { | 
|  | if (rc == 0) { | 
|  | s->ifs[i].detached = true; | 
|  | } | 
|  | continue; | 
|  | } | 
|  | trace_usb_host_detach_kernel(s->bus_num, s->addr, i); | 
|  | rc = libusb_detach_kernel_driver(s->dh, i); | 
|  | usb_host_libusb_error("libusb_detach_kernel_driver", rc); | 
|  | s->ifs[i].detached = true; | 
|  | } | 
|  | libusb_free_config_descriptor(conf); | 
|  | } | 
|  |  | 
|  | static void usb_host_attach_kernel(USBHostDevice *s) | 
|  | { | 
|  | struct libusb_config_descriptor *conf; | 
|  | int rc, i; | 
|  |  | 
|  | rc = libusb_get_active_config_descriptor(s->dev, &conf); | 
|  | if (rc != 0) { | 
|  | return; | 
|  | } | 
|  | for (i = 0; i < USB_MAX_INTERFACES; i++) { | 
|  | if (!s->ifs[i].detached) { | 
|  | continue; | 
|  | } | 
|  | trace_usb_host_attach_kernel(s->bus_num, s->addr, i); | 
|  | libusb_attach_kernel_driver(s->dh, i); | 
|  | s->ifs[i].detached = false; | 
|  | } | 
|  | libusb_free_config_descriptor(conf); | 
|  | } | 
|  |  | 
|  | static int usb_host_claim_interfaces(USBHostDevice *s, int configuration) | 
|  | { | 
|  | USBDevice *udev = USB_DEVICE(s); | 
|  | struct libusb_config_descriptor *conf; | 
|  | int rc, i, claimed; | 
|  |  | 
|  | for (i = 0; i < USB_MAX_INTERFACES; i++) { | 
|  | udev->altsetting[i] = 0; | 
|  | } | 
|  | udev->ninterfaces   = 0; | 
|  | udev->configuration = 0; | 
|  |  | 
|  | usb_host_detach_kernel(s); | 
|  |  | 
|  | rc = libusb_get_active_config_descriptor(s->dev, &conf); | 
|  | if (rc != 0) { | 
|  | if (rc == LIBUSB_ERROR_NOT_FOUND) { | 
|  | /* address state - ignore */ | 
|  | return USB_RET_SUCCESS; | 
|  | } | 
|  | return USB_RET_STALL; | 
|  | } | 
|  |  | 
|  | claimed = 0; | 
|  | for (i = 0; i < USB_MAX_INTERFACES; i++) { | 
|  | trace_usb_host_claim_interface(s->bus_num, s->addr, configuration, i); | 
|  | rc = libusb_claim_interface(s->dh, i); | 
|  | if (rc == 0) { | 
|  | s->ifs[i].claimed = true; | 
|  | if (++claimed == conf->bNumInterfaces) { | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | if (claimed != conf->bNumInterfaces) { | 
|  | return USB_RET_STALL; | 
|  | } | 
|  |  | 
|  | udev->ninterfaces   = conf->bNumInterfaces; | 
|  | udev->configuration = configuration; | 
|  |  | 
|  | libusb_free_config_descriptor(conf); | 
|  | return USB_RET_SUCCESS; | 
|  | } | 
|  |  | 
|  | static void usb_host_release_interfaces(USBHostDevice *s) | 
|  | { | 
|  | int i, rc; | 
|  |  | 
|  | for (i = 0; i < USB_MAX_INTERFACES; i++) { | 
|  | if (!s->ifs[i].claimed) { | 
|  | continue; | 
|  | } | 
|  | trace_usb_host_release_interface(s->bus_num, s->addr, i); | 
|  | rc = libusb_release_interface(s->dh, i); | 
|  | usb_host_libusb_error("libusb_release_interface", rc); | 
|  | s->ifs[i].claimed = false; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usb_host_set_address(USBHostDevice *s, int addr) | 
|  | { | 
|  | USBDevice *udev = USB_DEVICE(s); | 
|  |  | 
|  | trace_usb_host_set_address(s->bus_num, s->addr, addr); | 
|  | udev->addr = addr; | 
|  | } | 
|  |  | 
|  | static void usb_host_set_config(USBHostDevice *s, int config, USBPacket *p) | 
|  | { | 
|  | int rc = 0; | 
|  |  | 
|  | trace_usb_host_set_config(s->bus_num, s->addr, config); | 
|  |  | 
|  | usb_host_release_interfaces(s); | 
|  | if (s->ddesc.bNumConfigurations != 1) { | 
|  | rc = libusb_set_configuration(s->dh, config); | 
|  | if (rc != 0) { | 
|  | usb_host_libusb_error("libusb_set_configuration", rc); | 
|  | p->status = USB_RET_STALL; | 
|  | if (rc == LIBUSB_ERROR_NO_DEVICE) { | 
|  | usb_host_nodev(s); | 
|  | } | 
|  | return; | 
|  | } | 
|  | } | 
|  | p->status = usb_host_claim_interfaces(s, config); | 
|  | if (p->status != USB_RET_SUCCESS) { | 
|  | return; | 
|  | } | 
|  | usb_host_ep_update(s); | 
|  | } | 
|  |  | 
|  | static void usb_host_set_interface(USBHostDevice *s, int iface, int alt, | 
|  | USBPacket *p) | 
|  | { | 
|  | USBDevice *udev = USB_DEVICE(s); | 
|  | int rc; | 
|  |  | 
|  | trace_usb_host_set_interface(s->bus_num, s->addr, iface, alt); | 
|  |  | 
|  | usb_host_iso_free_all(s); | 
|  |  | 
|  | if (iface >= USB_MAX_INTERFACES) { | 
|  | p->status = USB_RET_STALL; | 
|  | return; | 
|  | } | 
|  |  | 
|  | rc = libusb_set_interface_alt_setting(s->dh, iface, alt); | 
|  | if (rc != 0) { | 
|  | usb_host_libusb_error("libusb_set_interface_alt_setting", rc); | 
|  | p->status = USB_RET_STALL; | 
|  | if (rc == LIBUSB_ERROR_NO_DEVICE) { | 
|  | usb_host_nodev(s); | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | udev->altsetting[iface] = alt; | 
|  | usb_host_ep_update(s); | 
|  | } | 
|  |  | 
|  | static void usb_host_handle_control(USBDevice *udev, USBPacket *p, | 
|  | int request, int value, int index, | 
|  | int length, uint8_t *data) | 
|  | { | 
|  | USBHostDevice *s = USB_HOST_DEVICE(udev); | 
|  | USBHostRequest *r; | 
|  | int rc; | 
|  |  | 
|  | trace_usb_host_req_control(s->bus_num, s->addr, p, request, value, index); | 
|  |  | 
|  | if (s->dh == NULL) { | 
|  | p->status = USB_RET_NODEV; | 
|  | trace_usb_host_req_emulated(s->bus_num, s->addr, p, p->status); | 
|  | return; | 
|  | } | 
|  |  | 
|  | switch (request) { | 
|  | case DeviceOutRequest | USB_REQ_SET_ADDRESS: | 
|  | usb_host_set_address(s, value); | 
|  | trace_usb_host_req_emulated(s->bus_num, s->addr, p, p->status); | 
|  | return; | 
|  |  | 
|  | case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: | 
|  | usb_host_set_config(s, value & 0xff, p); | 
|  | trace_usb_host_req_emulated(s->bus_num, s->addr, p, p->status); | 
|  | return; | 
|  |  | 
|  | case InterfaceOutRequest | USB_REQ_SET_INTERFACE: | 
|  | usb_host_set_interface(s, index, value, p); | 
|  | trace_usb_host_req_emulated(s->bus_num, s->addr, p, p->status); | 
|  | return; | 
|  |  | 
|  | case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: | 
|  | if (value == 0) { /* clear halt */ | 
|  | int pid = (index & USB_DIR_IN) ? USB_TOKEN_IN : USB_TOKEN_OUT; | 
|  | libusb_clear_halt(s->dh, index); | 
|  | usb_ep_set_halted(udev, pid, index & 0x0f, 0); | 
|  | trace_usb_host_req_emulated(s->bus_num, s->addr, p, p->status); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | r = usb_host_req_alloc(s, p, (request >> 8) & USB_DIR_IN, length + 8); | 
|  | r->cbuf = data; | 
|  | r->clen = length; | 
|  | memcpy(r->buffer, udev->setup_buf, 8); | 
|  | if (!r->in) { | 
|  | memcpy(r->buffer + 8, r->cbuf, r->clen); | 
|  | } | 
|  |  | 
|  | /* Fix up USB-3 ep0 maxpacket size to allow superspeed connected devices | 
|  | * to work redirected to a not superspeed capable hcd */ | 
|  | if ((udev->speedmask & USB_SPEED_MASK_SUPER) && | 
|  | !(udev->port->speedmask & USB_SPEED_MASK_SUPER) && | 
|  | request == 0x8006 && value == 0x100 && index == 0) { | 
|  | r->usb3ep0quirk = true; | 
|  | } | 
|  |  | 
|  | libusb_fill_control_transfer(r->xfer, s->dh, r->buffer, | 
|  | usb_host_req_complete_ctrl, r, | 
|  | CONTROL_TIMEOUT); | 
|  | rc = libusb_submit_transfer(r->xfer); | 
|  | if (rc != 0) { | 
|  | p->status = USB_RET_NODEV; | 
|  | trace_usb_host_req_complete(s->bus_num, s->addr, p, | 
|  | p->status, p->actual_length); | 
|  | if (rc == LIBUSB_ERROR_NO_DEVICE) { | 
|  | usb_host_nodev(s); | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | p->status = USB_RET_ASYNC; | 
|  | } | 
|  |  | 
|  | static void usb_host_handle_data(USBDevice *udev, USBPacket *p) | 
|  | { | 
|  | USBHostDevice *s = USB_HOST_DEVICE(udev); | 
|  | USBHostRequest *r; | 
|  | size_t size; | 
|  | int ep, rc; | 
|  |  | 
|  | if (usb_host_use_combining(p->ep) && p->state == USB_PACKET_SETUP) { | 
|  | p->status = USB_RET_ADD_TO_QUEUE; | 
|  | return; | 
|  | } | 
|  |  | 
|  | trace_usb_host_req_data(s->bus_num, s->addr, p, | 
|  | p->pid == USB_TOKEN_IN, | 
|  | p->ep->nr, p->iov.size); | 
|  |  | 
|  | if (s->dh == NULL) { | 
|  | p->status = USB_RET_NODEV; | 
|  | trace_usb_host_req_emulated(s->bus_num, s->addr, p, p->status); | 
|  | return; | 
|  | } | 
|  | if (p->ep->halted) { | 
|  | p->status = USB_RET_STALL; | 
|  | trace_usb_host_req_emulated(s->bus_num, s->addr, p, p->status); | 
|  | return; | 
|  | } | 
|  |  | 
|  | switch (usb_ep_get_type(udev, p->pid, p->ep->nr)) { | 
|  | case USB_ENDPOINT_XFER_BULK: | 
|  | size = usb_packet_size(p); | 
|  | r = usb_host_req_alloc(s, p, p->pid == USB_TOKEN_IN, size); | 
|  | if (!r->in) { | 
|  | usb_packet_copy(p, r->buffer, size); | 
|  | } | 
|  | ep = p->ep->nr | (r->in ? USB_DIR_IN : 0); | 
|  | if (p->stream) { | 
|  | #ifdef HAVE_STREAMS | 
|  | libusb_fill_bulk_stream_transfer(r->xfer, s->dh, ep, p->stream, | 
|  | r->buffer, size, | 
|  | usb_host_req_complete_data, r, | 
|  | BULK_TIMEOUT); | 
|  | #else | 
|  | usb_host_req_free(r); | 
|  | p->status = USB_RET_STALL; | 
|  | return; | 
|  | #endif | 
|  | } else { | 
|  | libusb_fill_bulk_transfer(r->xfer, s->dh, ep, | 
|  | r->buffer, size, | 
|  | usb_host_req_complete_data, r, | 
|  | BULK_TIMEOUT); | 
|  | } | 
|  | break; | 
|  | case USB_ENDPOINT_XFER_INT: | 
|  | r = usb_host_req_alloc(s, p, p->pid == USB_TOKEN_IN, p->iov.size); | 
|  | if (!r->in) { | 
|  | usb_packet_copy(p, r->buffer, p->iov.size); | 
|  | } | 
|  | ep = p->ep->nr | (r->in ? USB_DIR_IN : 0); | 
|  | libusb_fill_interrupt_transfer(r->xfer, s->dh, ep, | 
|  | r->buffer, p->iov.size, | 
|  | usb_host_req_complete_data, r, | 
|  | INTR_TIMEOUT); | 
|  | break; | 
|  | case USB_ENDPOINT_XFER_ISOC: | 
|  | if (p->pid == USB_TOKEN_IN) { | 
|  | usb_host_iso_data_in(s, p); | 
|  | } else { | 
|  | usb_host_iso_data_out(s, p); | 
|  | } | 
|  | trace_usb_host_req_complete(s->bus_num, s->addr, p, | 
|  | p->status, p->actual_length); | 
|  | return; | 
|  | default: | 
|  | p->status = USB_RET_STALL; | 
|  | trace_usb_host_req_complete(s->bus_num, s->addr, p, | 
|  | p->status, p->actual_length); | 
|  | return; | 
|  | } | 
|  |  | 
|  | rc = libusb_submit_transfer(r->xfer); | 
|  | if (rc != 0) { | 
|  | p->status = USB_RET_NODEV; | 
|  | trace_usb_host_req_complete(s->bus_num, s->addr, p, | 
|  | p->status, p->actual_length); | 
|  | if (rc == LIBUSB_ERROR_NO_DEVICE) { | 
|  | usb_host_nodev(s); | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | p->status = USB_RET_ASYNC; | 
|  | } | 
|  |  | 
|  | static void usb_host_flush_ep_queue(USBDevice *dev, USBEndpoint *ep) | 
|  | { | 
|  | if (usb_host_use_combining(ep)) { | 
|  | usb_ep_combine_input_packets(ep); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usb_host_handle_reset(USBDevice *udev) | 
|  | { | 
|  | USBHostDevice *s = USB_HOST_DEVICE(udev); | 
|  | int rc; | 
|  |  | 
|  | if (!s->allow_one_guest_reset && !s->allow_all_guest_resets) { | 
|  | return; | 
|  | } | 
|  | if (!s->allow_all_guest_resets && udev->addr == 0) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | trace_usb_host_reset(s->bus_num, s->addr); | 
|  |  | 
|  | rc = libusb_reset_device(s->dh); | 
|  | if (rc != 0) { | 
|  | usb_host_nodev(s); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int usb_host_alloc_streams(USBDevice *udev, USBEndpoint **eps, | 
|  | int nr_eps, int streams) | 
|  | { | 
|  | #ifdef HAVE_STREAMS | 
|  | USBHostDevice *s = USB_HOST_DEVICE(udev); | 
|  | unsigned char endpoints[30]; | 
|  | int i, rc; | 
|  |  | 
|  | for (i = 0; i < nr_eps; i++) { | 
|  | endpoints[i] = eps[i]->nr; | 
|  | if (eps[i]->pid == USB_TOKEN_IN) { | 
|  | endpoints[i] |= 0x80; | 
|  | } | 
|  | } | 
|  | rc = libusb_alloc_streams(s->dh, streams, endpoints, nr_eps); | 
|  | if (rc < 0) { | 
|  | usb_host_libusb_error("libusb_alloc_streams", rc); | 
|  | } else if (rc != streams) { | 
|  | error_report("libusb_alloc_streams: got less streams " | 
|  | "then requested %d < %d", rc, streams); | 
|  | } | 
|  |  | 
|  | return (rc == streams) ? 0 : -1; | 
|  | #else | 
|  | error_report("libusb_alloc_streams: error not implemented"); | 
|  | return -1; | 
|  | #endif | 
|  | } | 
|  |  | 
|  | static void usb_host_free_streams(USBDevice *udev, USBEndpoint **eps, | 
|  | int nr_eps) | 
|  | { | 
|  | #ifdef HAVE_STREAMS | 
|  | USBHostDevice *s = USB_HOST_DEVICE(udev); | 
|  | unsigned char endpoints[30]; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < nr_eps; i++) { | 
|  | endpoints[i] = eps[i]->nr; | 
|  | if (eps[i]->pid == USB_TOKEN_IN) { | 
|  | endpoints[i] |= 0x80; | 
|  | } | 
|  | } | 
|  | libusb_free_streams(s->dh, endpoints, nr_eps); | 
|  | #endif | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is *NOT* about restoring state.  We have absolutely no idea | 
|  | * what state the host device is in at the moment and whenever it is | 
|  | * still present in the first place.  Attempting to continue where we | 
|  | * left off is impossible. | 
|  | * | 
|  | * What we are going to do here is emulate a surprise removal of | 
|  | * the usb device passed through, then kick host scan so the device | 
|  | * will get re-attached (and re-initialized by the guest) in case it | 
|  | * is still present. | 
|  | * | 
|  | * As the device removal will change the state of other devices (usb | 
|  | * host controller, most likely interrupt controller too) we have to | 
|  | * wait with it until *all* vmstate is loaded.  Thus post_load just | 
|  | * kicks a bottom half which then does the actual work. | 
|  | */ | 
|  | static void usb_host_post_load_bh(void *opaque) | 
|  | { | 
|  | USBHostDevice *dev = opaque; | 
|  | USBDevice *udev = USB_DEVICE(dev); | 
|  |  | 
|  | if (dev->dh != NULL) { | 
|  | usb_host_close(dev); | 
|  | } | 
|  | if (udev->attached) { | 
|  | usb_device_detach(udev); | 
|  | } | 
|  | dev->bh_postld_pending = false; | 
|  | usb_host_auto_check(NULL); | 
|  | } | 
|  |  | 
|  | static int usb_host_post_load(void *opaque, int version_id) | 
|  | { | 
|  | USBHostDevice *dev = opaque; | 
|  |  | 
|  | if (!dev->bh_postld) { | 
|  | dev->bh_postld = qemu_bh_new_guarded(usb_host_post_load_bh, dev, | 
|  | &DEVICE(dev)->mem_reentrancy_guard); | 
|  | } | 
|  | qemu_bh_schedule(dev->bh_postld); | 
|  | dev->bh_postld_pending = true; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const VMStateDescription vmstate_usb_host = { | 
|  | .name = "usb-host", | 
|  | .version_id = 1, | 
|  | .minimum_version_id = 1, | 
|  | .post_load = usb_host_post_load, | 
|  | .fields = (const VMStateField[]) { | 
|  | VMSTATE_USB_DEVICE(parent_obj, USBHostDevice), | 
|  | VMSTATE_END_OF_LIST() | 
|  | } | 
|  | }; | 
|  |  | 
|  | static const Property usb_host_dev_properties[] = { | 
|  | DEFINE_PROP_UINT32("hostbus",  USBHostDevice, match.bus_num,    0), | 
|  | DEFINE_PROP_UINT32("hostaddr", USBHostDevice, match.addr,       0), | 
|  | DEFINE_PROP_STRING("hostport", USBHostDevice, match.port), | 
|  | DEFINE_PROP_UINT32("vendorid",  USBHostDevice, match.vendor_id,  0), | 
|  | DEFINE_PROP_UINT32("productid", USBHostDevice, match.product_id, 0), | 
|  | #if LIBUSB_API_VERSION >= 0x01000107 | 
|  | DEFINE_PROP_STRING("hostdevice", USBHostDevice, hostdevice), | 
|  | #endif | 
|  | DEFINE_PROP_UINT32("isobufs",  USBHostDevice, iso_urb_count,    4), | 
|  | DEFINE_PROP_UINT32("isobsize", USBHostDevice, iso_urb_frames,   32), | 
|  | DEFINE_PROP_BOOL("guest-reset", USBHostDevice, | 
|  | allow_one_guest_reset, true), | 
|  | DEFINE_PROP_BOOL("guest-resets-all", USBHostDevice, | 
|  | allow_all_guest_resets, false), | 
|  | DEFINE_PROP_UINT32("loglevel",  USBHostDevice, loglevel, | 
|  | LIBUSB_LOG_LEVEL_WARNING), | 
|  | DEFINE_PROP_BIT("pipeline",    USBHostDevice, options, | 
|  | USB_HOST_OPT_PIPELINE, true), | 
|  | DEFINE_PROP_BOOL("suppress-remote-wake", USBHostDevice, | 
|  | suppress_remote_wake, true), | 
|  | }; | 
|  |  | 
|  | static void usb_host_class_initfn(ObjectClass *klass, void *data) | 
|  | { | 
|  | DeviceClass *dc = DEVICE_CLASS(klass); | 
|  | USBDeviceClass *uc = USB_DEVICE_CLASS(klass); | 
|  |  | 
|  | uc->realize        = usb_host_realize; | 
|  | uc->product_desc   = "USB Host Device"; | 
|  | uc->cancel_packet  = usb_host_cancel_packet; | 
|  | uc->handle_data    = usb_host_handle_data; | 
|  | uc->handle_control = usb_host_handle_control; | 
|  | uc->handle_reset   = usb_host_handle_reset; | 
|  | uc->unrealize      = usb_host_unrealize; | 
|  | uc->flush_ep_queue = usb_host_flush_ep_queue; | 
|  | uc->alloc_streams  = usb_host_alloc_streams; | 
|  | uc->free_streams   = usb_host_free_streams; | 
|  | dc->vmsd = &vmstate_usb_host; | 
|  | device_class_set_props(dc, usb_host_dev_properties); | 
|  | set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); | 
|  | } | 
|  |  | 
|  | static const TypeInfo usb_host_dev_info = { | 
|  | .name          = TYPE_USB_HOST_DEVICE, | 
|  | .parent        = TYPE_USB_DEVICE, | 
|  | .instance_size = sizeof(USBHostDevice), | 
|  | .class_init    = usb_host_class_initfn, | 
|  | .instance_init = usb_host_instance_init, | 
|  | }; | 
|  | module_obj(TYPE_USB_HOST_DEVICE); | 
|  | module_kconfig(USB); | 
|  |  | 
|  | static void usb_host_register_types(void) | 
|  | { | 
|  | type_register_static(&usb_host_dev_info); | 
|  | monitor_register_hmp("usbhost", true, hmp_info_usbhost); | 
|  | } | 
|  |  | 
|  | type_init(usb_host_register_types) | 
|  |  | 
|  | /* ------------------------------------------------------------------------ */ | 
|  |  | 
|  | static QEMUTimer *usb_auto_timer; | 
|  | static VMChangeStateEntry *usb_vmstate; | 
|  |  | 
|  | static void usb_host_vm_state(void *unused, bool running, RunState state) | 
|  | { | 
|  | if (running) { | 
|  | usb_host_auto_check(unused); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usb_host_auto_check(void *unused) | 
|  | { | 
|  | struct USBHostDevice *s; | 
|  | struct USBAutoFilter *f; | 
|  | libusb_device **devs = NULL; | 
|  | struct libusb_device_descriptor ddesc; | 
|  | int i, n; | 
|  |  | 
|  | if (usb_host_init() != 0) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (runstate_is_running()) { | 
|  | n = libusb_get_device_list(ctx, &devs); | 
|  | for (i = 0; i < n; i++) { | 
|  | if (libusb_get_device_descriptor(devs[i], &ddesc) != 0) { | 
|  | continue; | 
|  | } | 
|  | if (ddesc.bDeviceClass == LIBUSB_CLASS_HUB) { | 
|  | continue; | 
|  | } | 
|  | QTAILQ_FOREACH(s, &hostdevs, next) { | 
|  | f = &s->match; | 
|  | if (f->bus_num > 0 && | 
|  | f->bus_num != libusb_get_bus_number(devs[i])) { | 
|  | continue; | 
|  | } | 
|  | if (f->addr > 0 && | 
|  | f->addr != libusb_get_device_address(devs[i])) { | 
|  | continue; | 
|  | } | 
|  | if (f->port != NULL) { | 
|  | char port[16] = "-"; | 
|  | usb_host_get_port(devs[i], port, sizeof(port)); | 
|  | if (strcmp(f->port, port) != 0) { | 
|  | continue; | 
|  | } | 
|  | } | 
|  | if (f->vendor_id > 0 && | 
|  | f->vendor_id != ddesc.idVendor) { | 
|  | continue; | 
|  | } | 
|  | if (f->product_id > 0 && | 
|  | f->product_id != ddesc.idProduct) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* We got a match */ | 
|  | s->seen++; | 
|  | if (s->errcount >= 3) { | 
|  | continue; | 
|  | } | 
|  | if (s->dh != NULL) { | 
|  | continue; | 
|  | } | 
|  | if (usb_host_open(s, devs[i], 0) < 0) { | 
|  | s->errcount++; | 
|  | continue; | 
|  | } | 
|  | break; | 
|  | } | 
|  | } | 
|  | libusb_free_device_list(devs, 1); | 
|  |  | 
|  | QTAILQ_FOREACH(s, &hostdevs, next) { | 
|  | if (s->seen == 0) { | 
|  | if (s->dh) { | 
|  | usb_host_close(s); | 
|  | } | 
|  | s->errcount = 0; | 
|  | } | 
|  | s->seen = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!usb_vmstate) { | 
|  | usb_vmstate = qemu_add_vm_change_state_handler(usb_host_vm_state, NULL); | 
|  | } | 
|  | if (!usb_auto_timer) { | 
|  | usb_auto_timer = timer_new_ms(QEMU_CLOCK_REALTIME, usb_host_auto_check, NULL); | 
|  | if (!usb_auto_timer) { | 
|  | return; | 
|  | } | 
|  | trace_usb_host_auto_scan_enabled(); | 
|  | } | 
|  | timer_mod(usb_auto_timer, qemu_clock_get_ms(QEMU_CLOCK_REALTIME) + 2000); | 
|  | } | 
|  |  | 
|  | void hmp_info_usbhost(Monitor *mon, const QDict *qdict) | 
|  | { | 
|  | libusb_device **devs = NULL; | 
|  | struct libusb_device_descriptor ddesc; | 
|  | char port[16]; | 
|  | int i, n; | 
|  |  | 
|  | if (usb_host_init() != 0) { | 
|  | return; | 
|  | } | 
|  |  | 
|  | n = libusb_get_device_list(ctx, &devs); | 
|  | for (i = 0; i < n; i++) { | 
|  | if (libusb_get_device_descriptor(devs[i], &ddesc) != 0) { | 
|  | continue; | 
|  | } | 
|  | if (ddesc.bDeviceClass == LIBUSB_CLASS_HUB) { | 
|  | continue; | 
|  | } | 
|  | usb_host_get_port(devs[i], port, sizeof(port)); | 
|  | monitor_printf(mon, "  Bus %d, Addr %d, Port %s, Speed %s Mb/s\n", | 
|  | libusb_get_bus_number(devs[i]), | 
|  | libusb_get_device_address(devs[i]), | 
|  | port, | 
|  | speed_name[libusb_get_device_speed(devs[i])]); | 
|  | monitor_printf(mon, "    Class %02x:", ddesc.bDeviceClass); | 
|  | monitor_printf(mon, " USB device %04x:%04x", | 
|  | ddesc.idVendor, ddesc.idProduct); | 
|  | if (ddesc.iProduct) { | 
|  | libusb_device_handle *handle; | 
|  | if (libusb_open(devs[i], &handle) == 0) { | 
|  | unsigned char name[64] = ""; | 
|  | libusb_get_string_descriptor_ascii(handle, | 
|  | ddesc.iProduct, | 
|  | name, sizeof(name)); | 
|  | libusb_close(handle); | 
|  | monitor_printf(mon, ", %s", name); | 
|  | } | 
|  | } | 
|  | monitor_printf(mon, "\n"); | 
|  | } | 
|  | libusb_free_device_list(devs, 1); | 
|  | } |