| /* |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| * |
| * OpenRISC QEMU virtual machine. |
| * |
| * (c) 2022 Stafford Horne <shorne@gmail.com> |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/error-report.h" |
| #include "qemu/guest-random.h" |
| #include "qapi/error.h" |
| #include "cpu.h" |
| #include "exec/address-spaces.h" |
| #include "hw/irq.h" |
| #include "hw/boards.h" |
| #include "hw/char/serial.h" |
| #include "hw/core/split-irq.h" |
| #include "hw/openrisc/boot.h" |
| #include "hw/misc/sifive_test.h" |
| #include "hw/pci/pci.h" |
| #include "hw/pci-host/gpex.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/rtc/goldfish_rtc.h" |
| #include "hw/sysbus.h" |
| #include "hw/virtio/virtio-mmio.h" |
| #include "sysemu/device_tree.h" |
| #include "sysemu/sysemu.h" |
| #include "sysemu/qtest.h" |
| #include "sysemu/reset.h" |
| |
| #include <libfdt.h> |
| |
| #define VIRT_CPUS_MAX 4 |
| #define VIRT_CLK_MHZ 20000000 |
| |
| #define TYPE_VIRT_MACHINE MACHINE_TYPE_NAME("virt") |
| #define VIRT_MACHINE(obj) \ |
| OBJECT_CHECK(OR1KVirtState, (obj), TYPE_VIRT_MACHINE) |
| |
| typedef struct OR1KVirtState { |
| /*< private >*/ |
| MachineState parent_obj; |
| |
| /*< public >*/ |
| void *fdt; |
| int fdt_size; |
| |
| } OR1KVirtState; |
| |
| enum { |
| VIRT_DRAM, |
| VIRT_ECAM, |
| VIRT_MMIO, |
| VIRT_PIO, |
| VIRT_TEST, |
| VIRT_RTC, |
| VIRT_VIRTIO, |
| VIRT_UART, |
| VIRT_OMPIC, |
| }; |
| |
| enum { |
| VIRT_OMPIC_IRQ = 1, |
| VIRT_UART_IRQ = 2, |
| VIRT_RTC_IRQ = 3, |
| VIRT_VIRTIO_IRQ = 4, /* to 12 */ |
| VIRTIO_COUNT = 8, |
| VIRT_PCI_IRQ_BASE = 13, /* to 17 */ |
| }; |
| |
| static const struct MemmapEntry { |
| hwaddr base; |
| hwaddr size; |
| } virt_memmap[] = { |
| [VIRT_DRAM] = { 0x00000000, 0 }, |
| [VIRT_UART] = { 0x90000000, 0x100 }, |
| [VIRT_TEST] = { 0x96000000, 0x8 }, |
| [VIRT_RTC] = { 0x96005000, 0x1000 }, |
| [VIRT_VIRTIO] = { 0x97000000, 0x1000 }, |
| [VIRT_OMPIC] = { 0x98000000, VIRT_CPUS_MAX * 8 }, |
| [VIRT_ECAM] = { 0x9e000000, 0x1000000 }, |
| [VIRT_PIO] = { 0x9f000000, 0x1000000 }, |
| [VIRT_MMIO] = { 0xa0000000, 0x10000000 }, |
| }; |
| |
| static struct openrisc_boot_info { |
| uint32_t bootstrap_pc; |
| uint32_t fdt_addr; |
| } boot_info; |
| |
| static void main_cpu_reset(void *opaque) |
| { |
| OpenRISCCPU *cpu = opaque; |
| CPUState *cs = CPU(cpu); |
| |
| cpu_reset(CPU(cpu)); |
| |
| cpu_set_pc(cs, boot_info.bootstrap_pc); |
| cpu_set_gpr(&cpu->env, 3, boot_info.fdt_addr); |
| } |
| |
| static qemu_irq get_cpu_irq(OpenRISCCPU *cpus[], int cpunum, int irq_pin) |
| { |
| return qdev_get_gpio_in_named(DEVICE(cpus[cpunum]), "IRQ", irq_pin); |
| } |
| |
| static qemu_irq get_per_cpu_irq(OpenRISCCPU *cpus[], int num_cpus, int irq_pin) |
| { |
| int i; |
| |
| if (num_cpus > 1) { |
| DeviceState *splitter = qdev_new(TYPE_SPLIT_IRQ); |
| qdev_prop_set_uint32(splitter, "num-lines", num_cpus); |
| qdev_realize_and_unref(splitter, NULL, &error_fatal); |
| for (i = 0; i < num_cpus; i++) { |
| qdev_connect_gpio_out(splitter, i, get_cpu_irq(cpus, i, irq_pin)); |
| } |
| return qdev_get_gpio_in(splitter, 0); |
| } else { |
| return get_cpu_irq(cpus, 0, irq_pin); |
| } |
| } |
| |
| static void openrisc_create_fdt(OR1KVirtState *state, |
| const struct MemmapEntry *memmap, |
| int num_cpus, uint64_t mem_size, |
| const char *cmdline, |
| int32_t *pic_phandle) |
| { |
| void *fdt; |
| int cpu; |
| char *nodename; |
| uint8_t rng_seed[32]; |
| |
| fdt = state->fdt = create_device_tree(&state->fdt_size); |
| if (!fdt) { |
| error_report("create_device_tree() failed"); |
| exit(1); |
| } |
| |
| qemu_fdt_setprop_string(fdt, "/", "compatible", "opencores,or1ksim"); |
| qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x1); |
| qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x1); |
| |
| qemu_fdt_add_subnode(fdt, "/soc"); |
| qemu_fdt_setprop(fdt, "/soc", "ranges", NULL, 0); |
| qemu_fdt_setprop_string(fdt, "/soc", "compatible", "simple-bus"); |
| qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x1); |
| qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x1); |
| |
| nodename = g_strdup_printf("/memory@%" HWADDR_PRIx, |
| memmap[VIRT_DRAM].base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", |
| memmap[VIRT_DRAM].base, mem_size); |
| qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory"); |
| g_free(nodename); |
| |
| qemu_fdt_add_subnode(fdt, "/cpus"); |
| qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0); |
| qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1); |
| |
| for (cpu = 0; cpu < num_cpus; cpu++) { |
| nodename = g_strdup_printf("/cpus/cpu@%d", cpu); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", |
| "opencores,or1200-rtlsvn481"); |
| qemu_fdt_setprop_cell(fdt, nodename, "reg", cpu); |
| qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", |
| VIRT_CLK_MHZ); |
| g_free(nodename); |
| } |
| |
| nodename = (char *)"/pic"; |
| qemu_fdt_add_subnode(fdt, nodename); |
| *pic_phandle = qemu_fdt_alloc_phandle(fdt); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", |
| "opencores,or1k-pic-level"); |
| qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 1); |
| qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0); |
| qemu_fdt_setprop_cell(fdt, nodename, "phandle", *pic_phandle); |
| |
| qemu_fdt_setprop_cell(fdt, "/", "interrupt-parent", *pic_phandle); |
| |
| qemu_fdt_add_subnode(fdt, "/chosen"); |
| if (cmdline) { |
| qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", cmdline); |
| } |
| |
| /* Pass seed to RNG. */ |
| qemu_guest_getrandom_nofail(rng_seed, sizeof(rng_seed)); |
| qemu_fdt_setprop(fdt, "/chosen", "rng-seed", rng_seed, sizeof(rng_seed)); |
| |
| /* Create aliases node for use by devices. */ |
| qemu_fdt_add_subnode(fdt, "/aliases"); |
| } |
| |
| static void openrisc_virt_ompic_init(OR1KVirtState *state, hwaddr base, |
| hwaddr size, int num_cpus, |
| OpenRISCCPU *cpus[], int irq_pin) |
| { |
| void *fdt = state->fdt; |
| DeviceState *dev; |
| SysBusDevice *s; |
| char *nodename; |
| int i; |
| |
| dev = qdev_new("or1k-ompic"); |
| qdev_prop_set_uint32(dev, "num-cpus", num_cpus); |
| |
| s = SYS_BUS_DEVICE(dev); |
| sysbus_realize_and_unref(s, &error_fatal); |
| for (i = 0; i < num_cpus; i++) { |
| sysbus_connect_irq(s, i, get_cpu_irq(cpus, i, irq_pin)); |
| } |
| sysbus_mmio_map(s, 0, base); |
| |
| /* Add device tree node for ompic. */ |
| nodename = g_strdup_printf("/ompic@%" HWADDR_PRIx, base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "openrisc,ompic"); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", base, size); |
| qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0); |
| qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 0); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupts", irq_pin); |
| g_free(nodename); |
| } |
| |
| static void openrisc_virt_serial_init(OR1KVirtState *state, hwaddr base, |
| hwaddr size, int num_cpus, |
| OpenRISCCPU *cpus[], int irq_pin) |
| { |
| void *fdt = state->fdt; |
| char *nodename; |
| qemu_irq serial_irq = get_per_cpu_irq(cpus, num_cpus, irq_pin); |
| |
| serial_mm_init(get_system_memory(), base, 0, serial_irq, 115200, |
| serial_hd(0), DEVICE_NATIVE_ENDIAN); |
| |
| /* Add device tree node for serial. */ |
| nodename = g_strdup_printf("/serial@%" HWADDR_PRIx, base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "ns16550a"); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", base, size); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupts", irq_pin); |
| qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", VIRT_CLK_MHZ); |
| qemu_fdt_setprop(fdt, nodename, "big-endian", NULL, 0); |
| |
| /* The /chosen node is created during fdt creation. */ |
| qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", nodename); |
| qemu_fdt_setprop_string(fdt, "/aliases", "uart0", nodename); |
| g_free(nodename); |
| } |
| |
| static void openrisc_virt_test_init(OR1KVirtState *state, hwaddr base, |
| hwaddr size) |
| { |
| void *fdt = state->fdt; |
| int test_ph; |
| char *nodename; |
| |
| /* SiFive Test MMIO device */ |
| sifive_test_create(base); |
| |
| /* SiFive Test MMIO Reset device FDT */ |
| nodename = g_strdup_printf("/soc/test@%" HWADDR_PRIx, base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "syscon"); |
| test_ph = qemu_fdt_alloc_phandle(fdt); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", base, size); |
| qemu_fdt_setprop_cell(fdt, nodename, "phandle", test_ph); |
| qemu_fdt_setprop(fdt, nodename, "big-endian", NULL, 0); |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/soc/reboot"); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "syscon-reboot"); |
| qemu_fdt_setprop_cell(fdt, nodename, "regmap", test_ph); |
| qemu_fdt_setprop_cell(fdt, nodename, "offset", 0x0); |
| qemu_fdt_setprop_cell(fdt, nodename, "value", FINISHER_RESET); |
| g_free(nodename); |
| |
| nodename = g_strdup_printf("/soc/poweroff"); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "syscon-poweroff"); |
| qemu_fdt_setprop_cell(fdt, nodename, "regmap", test_ph); |
| qemu_fdt_setprop_cell(fdt, nodename, "offset", 0x0); |
| qemu_fdt_setprop_cell(fdt, nodename, "value", FINISHER_PASS); |
| g_free(nodename); |
| |
| } |
| |
| static void openrisc_virt_rtc_init(OR1KVirtState *state, hwaddr base, |
| hwaddr size, int num_cpus, |
| OpenRISCCPU *cpus[], int irq_pin) |
| { |
| void *fdt = state->fdt; |
| char *nodename; |
| qemu_irq rtc_irq = get_per_cpu_irq(cpus, num_cpus, irq_pin); |
| |
| /* Goldfish RTC */ |
| sysbus_create_simple(TYPE_GOLDFISH_RTC, base, rtc_irq); |
| |
| /* Goldfish RTC FDT */ |
| nodename = g_strdup_printf("/soc/rtc@%" HWADDR_PRIx, base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", |
| "google,goldfish-rtc"); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", base, size); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupts", irq_pin); |
| g_free(nodename); |
| |
| } |
| |
| static void create_pcie_irq_map(void *fdt, char *nodename, int irq_base, |
| uint32_t irqchip_phandle) |
| { |
| int pin, dev; |
| uint32_t irq_map_stride = 0; |
| uint32_t full_irq_map[GPEX_NUM_IRQS * GPEX_NUM_IRQS * 6] = {}; |
| uint32_t *irq_map = full_irq_map; |
| |
| /* |
| * This code creates a standard swizzle of interrupts such that |
| * each device's first interrupt is based on it's PCI_SLOT number. |
| * (See pci_swizzle_map_irq_fn()) |
| * |
| * We only need one entry per interrupt in the table (not one per |
| * possible slot) seeing the interrupt-map-mask will allow the table |
| * to wrap to any number of devices. |
| */ |
| for (dev = 0; dev < GPEX_NUM_IRQS; dev++) { |
| int devfn = dev << 3; |
| |
| for (pin = 0; pin < GPEX_NUM_IRQS; pin++) { |
| int irq_nr = irq_base + ((pin + PCI_SLOT(devfn)) % GPEX_NUM_IRQS); |
| int i = 0; |
| |
| /* Fill PCI address cells */ |
| irq_map[i++] = cpu_to_be32(devfn << 8); |
| irq_map[i++] = 0; |
| irq_map[i++] = 0; |
| |
| /* Fill PCI Interrupt cells */ |
| irq_map[i++] = cpu_to_be32(pin + 1); |
| |
| /* Fill interrupt controller phandle and cells */ |
| irq_map[i++] = cpu_to_be32(irqchip_phandle); |
| irq_map[i++] = cpu_to_be32(irq_nr); |
| |
| if (!irq_map_stride) { |
| irq_map_stride = i; |
| } |
| irq_map += irq_map_stride; |
| } |
| } |
| |
| qemu_fdt_setprop(fdt, nodename, "interrupt-map", full_irq_map, |
| GPEX_NUM_IRQS * GPEX_NUM_IRQS * |
| irq_map_stride * sizeof(uint32_t)); |
| |
| qemu_fdt_setprop_cells(fdt, nodename, "interrupt-map-mask", |
| 0x1800, 0, 0, 0x7); |
| } |
| |
| static void openrisc_virt_pcie_init(OR1KVirtState *state, |
| hwaddr ecam_base, hwaddr ecam_size, |
| hwaddr pio_base, hwaddr pio_size, |
| hwaddr mmio_base, hwaddr mmio_size, |
| int num_cpus, OpenRISCCPU *cpus[], |
| int irq_base, int32_t pic_phandle) |
| { |
| void *fdt = state->fdt; |
| char *nodename; |
| MemoryRegion *alias; |
| MemoryRegion *reg; |
| DeviceState *dev; |
| qemu_irq pcie_irq; |
| int i; |
| |
| dev = qdev_new(TYPE_GPEX_HOST); |
| sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); |
| |
| /* Map ECAM space. */ |
| alias = g_new0(MemoryRegion, 1); |
| reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0); |
| memory_region_init_alias(alias, OBJECT(dev), "pcie-ecam", |
| reg, 0, ecam_size); |
| memory_region_add_subregion(get_system_memory(), ecam_base, alias); |
| |
| /* |
| * Map the MMIO window into system address space so as to expose |
| * the section of PCI MMIO space which starts at the same base address |
| * (ie 1:1 mapping for that part of PCI MMIO space visible through |
| * the window). |
| */ |
| alias = g_new0(MemoryRegion, 1); |
| reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1); |
| memory_region_init_alias(alias, OBJECT(dev), "pcie-mmio", |
| reg, mmio_base, mmio_size); |
| memory_region_add_subregion(get_system_memory(), mmio_base, alias); |
| |
| /* Map IO port space. */ |
| alias = g_new0(MemoryRegion, 1); |
| reg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 2); |
| memory_region_init_alias(alias, OBJECT(dev), "pcie-pio", |
| reg, 0, pio_size); |
| memory_region_add_subregion(get_system_memory(), pio_base, alias); |
| |
| /* Connect IRQ lines. */ |
| for (i = 0; i < GPEX_NUM_IRQS; i++) { |
| pcie_irq = get_per_cpu_irq(cpus, num_cpus, irq_base + i); |
| |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), i, pcie_irq); |
| gpex_set_irq_num(GPEX_HOST(dev), i, irq_base + i); |
| } |
| |
| nodename = g_strdup_printf("/soc/pci@%" HWADDR_PRIx, ecam_base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 1); |
| qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 3); |
| qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 2); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", |
| "pci-host-ecam-generic"); |
| qemu_fdt_setprop_string(fdt, nodename, "device_type", "pci"); |
| qemu_fdt_setprop_cell(fdt, nodename, "linux,pci-domain", 0); |
| qemu_fdt_setprop_cells(fdt, nodename, "bus-range", 0, |
| ecam_size / PCIE_MMCFG_SIZE_MIN - 1); |
| qemu_fdt_setprop(fdt, nodename, "dma-coherent", NULL, 0); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", ecam_base, ecam_size); |
| /* pci-address(3) cpu-address(1) pci-size(2) */ |
| qemu_fdt_setprop_cells(fdt, nodename, "ranges", |
| FDT_PCI_RANGE_IOPORT, 0, 0, |
| pio_base, 0, pio_size, |
| FDT_PCI_RANGE_MMIO, 0, mmio_base, |
| mmio_base, 0, mmio_size); |
| |
| create_pcie_irq_map(fdt, nodename, irq_base, pic_phandle); |
| g_free(nodename); |
| } |
| |
| static void openrisc_virt_virtio_init(OR1KVirtState *state, hwaddr base, |
| hwaddr size, int num_cpus, |
| OpenRISCCPU *cpus[], int irq_pin) |
| { |
| void *fdt = state->fdt; |
| char *nodename; |
| DeviceState *dev; |
| SysBusDevice *sysbus; |
| qemu_irq virtio_irq = get_per_cpu_irq(cpus, num_cpus, irq_pin); |
| |
| /* VirtIO MMIO devices */ |
| dev = qdev_new(TYPE_VIRTIO_MMIO); |
| qdev_prop_set_bit(dev, "force-legacy", false); |
| sysbus = SYS_BUS_DEVICE(dev); |
| sysbus_realize_and_unref(sysbus, &error_fatal); |
| sysbus_connect_irq(sysbus, 0, virtio_irq); |
| sysbus_mmio_map(sysbus, 0, base); |
| |
| /* VirtIO MMIO devices FDT */ |
| nodename = g_strdup_printf("/soc/virtio_mmio@%" HWADDR_PRIx, base); |
| qemu_fdt_add_subnode(fdt, nodename); |
| qemu_fdt_setprop_string(fdt, nodename, "compatible", "virtio,mmio"); |
| qemu_fdt_setprop_cells(fdt, nodename, "reg", base, size); |
| qemu_fdt_setprop_cell(fdt, nodename, "interrupts", irq_pin); |
| g_free(nodename); |
| } |
| |
| static void openrisc_virt_init(MachineState *machine) |
| { |
| ram_addr_t ram_size = machine->ram_size; |
| const char *kernel_filename = machine->kernel_filename; |
| OpenRISCCPU *cpus[VIRT_CPUS_MAX] = {}; |
| OR1KVirtState *state = VIRT_MACHINE(machine); |
| MemoryRegion *ram; |
| hwaddr load_addr; |
| int n; |
| unsigned int smp_cpus = machine->smp.cpus; |
| int32_t pic_phandle; |
| |
| assert(smp_cpus >= 1 && smp_cpus <= VIRT_CPUS_MAX); |
| for (n = 0; n < smp_cpus; n++) { |
| cpus[n] = OPENRISC_CPU(cpu_create(machine->cpu_type)); |
| if (cpus[n] == NULL) { |
| fprintf(stderr, "Unable to find CPU definition!\n"); |
| exit(1); |
| } |
| |
| cpu_openrisc_clock_init(cpus[n]); |
| |
| qemu_register_reset(main_cpu_reset, cpus[n]); |
| } |
| |
| ram = g_malloc(sizeof(*ram)); |
| memory_region_init_ram(ram, NULL, "openrisc.ram", ram_size, &error_fatal); |
| memory_region_add_subregion(get_system_memory(), 0, ram); |
| |
| openrisc_create_fdt(state, virt_memmap, smp_cpus, machine->ram_size, |
| machine->kernel_cmdline, &pic_phandle); |
| |
| if (smp_cpus > 1) { |
| openrisc_virt_ompic_init(state, virt_memmap[VIRT_OMPIC].base, |
| virt_memmap[VIRT_OMPIC].size, |
| smp_cpus, cpus, VIRT_OMPIC_IRQ); |
| } |
| |
| openrisc_virt_serial_init(state, virt_memmap[VIRT_UART].base, |
| virt_memmap[VIRT_UART].size, |
| smp_cpus, cpus, VIRT_UART_IRQ); |
| |
| openrisc_virt_test_init(state, virt_memmap[VIRT_TEST].base, |
| virt_memmap[VIRT_TEST].size); |
| |
| openrisc_virt_rtc_init(state, virt_memmap[VIRT_RTC].base, |
| virt_memmap[VIRT_RTC].size, smp_cpus, cpus, |
| VIRT_RTC_IRQ); |
| |
| openrisc_virt_pcie_init(state, virt_memmap[VIRT_ECAM].base, |
| virt_memmap[VIRT_ECAM].size, |
| virt_memmap[VIRT_PIO].base, |
| virt_memmap[VIRT_PIO].size, |
| virt_memmap[VIRT_MMIO].base, |
| virt_memmap[VIRT_MMIO].size, |
| smp_cpus, cpus, |
| VIRT_PCI_IRQ_BASE, pic_phandle); |
| |
| for (n = 0; n < VIRTIO_COUNT; n++) { |
| openrisc_virt_virtio_init(state, virt_memmap[VIRT_VIRTIO].base |
| + n * virt_memmap[VIRT_VIRTIO].size, |
| virt_memmap[VIRT_VIRTIO].size, |
| smp_cpus, cpus, VIRT_VIRTIO_IRQ + n); |
| } |
| |
| load_addr = openrisc_load_kernel(ram_size, kernel_filename, |
| &boot_info.bootstrap_pc); |
| if (load_addr > 0) { |
| if (machine->initrd_filename) { |
| load_addr = openrisc_load_initrd(state->fdt, |
| machine->initrd_filename, |
| load_addr, machine->ram_size); |
| } |
| boot_info.fdt_addr = openrisc_load_fdt(state->fdt, load_addr, |
| machine->ram_size); |
| } |
| } |
| |
| static void openrisc_virt_machine_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| |
| mc->desc = "or1k virtual machine"; |
| mc->init = openrisc_virt_init; |
| mc->max_cpus = VIRT_CPUS_MAX; |
| mc->is_default = false; |
| mc->default_cpu_type = OPENRISC_CPU_TYPE_NAME("or1200"); |
| } |
| |
| static const TypeInfo or1ksim_machine_typeinfo = { |
| .name = TYPE_VIRT_MACHINE, |
| .parent = TYPE_MACHINE, |
| .class_init = openrisc_virt_machine_init, |
| .instance_size = sizeof(OR1KVirtState), |
| }; |
| |
| static void or1ksim_machine_init_register_types(void) |
| { |
| type_register_static(&or1ksim_machine_typeinfo); |
| } |
| |
| type_init(or1ksim_machine_init_register_types) |