docs/system/i386/amd-memory-encryption.rst - qemu - Git at Google

 AMD Secure Encrypted Virtualization (SEV)
 =========================================

 Secure Encrypted Virtualization (SEV) is a feature found on AMD processors.

 SEV is an extension to the AMD-V architecture which supports running encrypted
 virtual machines (VMs) under the control of KVM. Encrypted VMs have their pages
 (code and data) secured such that only the guest itself has access to the
 unencrypted version. Each encrypted VM is associated with a unique encryption
 key; if its data is accessed by a different entity using a different key the
 encrypted guests data will be incorrectly decrypted, leading to unintelligible
 data.

 Key management for this feature is handled by a separate processor known as the
 AMD secure processor (AMD-SP), which is present in AMD SOCs. Firmware running
 inside the AMD-SP provides commands to support a common VM lifecycle. This
 includes commands for launching, snapshotting, migrating and debugging the
 encrypted guest. These SEV commands can be issued via KVM_MEMORY_ENCRYPT_OP
 ioctls.

 Secure Encrypted Virtualization - Encrypted State (SEV-ES) builds on the SEV
 support to additionally protect the guest register state. In order to allow a
 hypervisor to perform functions on behalf of a guest, there is architectural
 support for notifying a guest's operating system when certain types of VMEXITs
 are about to occur. This allows the guest to selectively share information with
 the hypervisor to satisfy the requested function.

 Launching
 ---------

 Boot images (such as bios) must be encrypted before a guest can be booted. The
 ``MEMORY_ENCRYPT_OP`` ioctl provides commands to encrypt the images: ``LAUNCH_START``,
 ``LAUNCH_UPDATE_DATA``, ``LAUNCH_MEASURE`` and ``LAUNCH_FINISH``. These four commands
 together generate a fresh memory encryption key for the VM, encrypt the boot
 images and provide a measurement than can be used as an attestation of a
 successful launch.

 For a SEV-ES guest, the ``LAUNCH_UPDATE_VMSA`` command is also used to encrypt the
 guest register state, or VM save area (VMSA), for all of the guest vCPUs.

 ``LAUNCH_START`` is called first to create a cryptographic launch context within
 the firmware. To create this context, guest owner must provide a guest policy,
 its public Diffie-Hellman key (PDH) and session parameters. These inputs
 should be treated as a binary blob and must be passed as-is to the SEV firmware.

 The guest policy is passed as plaintext. A hypervisor may choose to read it,
 but should not modify it (any modification of the policy bits will result
 in bad measurement). The guest policy is a 4-byte data structure containing
 several flags that restricts what can be done on a running SEV guest.
 See KM Spec section 3 and 6.2 for more details.

 The guest policy can be provided via the ``policy`` property::

   # ${QEMU} \
      sev-guest,id=sev0,policy=0x1...\

 Setting the "SEV-ES required" policy bit (bit 2) will launch the guest as a
 SEV-ES guest::

   # ${QEMU} \
      sev-guest,id=sev0,policy=0x5...\

 The guest owner provided DH certificate and session parameters will be used to
 establish a cryptographic session with the guest owner to negotiate keys used
 for the attestation.

 The DH certificate and session blob can be provided via the ``dh-cert-file`` and
 ``session-file`` properties::

   # ${QEMU} \
        sev-guest,id=sev0,dh-cert-file=<file1>,session-file=<file2>

 ``LAUNCH_UPDATE_DATA`` encrypts the memory region using the cryptographic context
 created via the ``LAUNCH_START`` command. If required, this command can be called
 multiple times to encrypt different memory regions. The command also calculates
 the measurement of the memory contents as it encrypts.

 ``LAUNCH_UPDATE_VMSA`` encrypts all the vCPU VMSAs for a SEV-ES guest using the
 cryptographic context created via the ``LAUNCH_START`` command. The command also
 calculates the measurement of the VMSAs as it encrypts them.

 ``LAUNCH_MEASURE`` can be used to retrieve the measurement of encrypted memory and,
 for a SEV-ES guest, encrypted VMSAs. This measurement is a signature of the
 memory contents and, for a SEV-ES guest, the VMSA contents, that can be sent
 to the guest owner as an attestation that the memory and VMSAs were encrypted
 correctly by the firmware. The guest owner may wait to provide the guest
 confidential information until it can verify the attestation measurement.
 Since the guest owner knows the initial contents of the guest at boot, the
 attestation measurement can be verified by comparing it to what the guest owner
 expects.

 ``LAUNCH_FINISH`` finalizes the guest launch and destroys the cryptographic
 context.

 See SEV KM API Spec ([SEVKM]_) 'Launching a guest' usage flow (Appendix A) for the
 complete flow chart.

 To launch a SEV guest::

   # ${QEMU} \
       -machine ...,confidential-guest-support=sev0 \
       -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=1

 To launch a SEV-ES guest::

   # ${QEMU} \
       -machine ...,confidential-guest-support=sev0 \
       -object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=1,policy=0x5

 An SEV-ES guest has some restrictions as compared to a SEV guest. Because the
 guest register state is encrypted and cannot be updated by the VMM/hypervisor,
 a SEV-ES guest:

  - Does not support SMM - SMM support requires updating the guest register
    state.
  - Does not support reboot - a system reset requires updating the guest register
    state.
  - Requires in-kernel irqchip - the burden is placed on the hypervisor to
    manage booting APs.

 Debugging
 ---------

 Since the memory contents of a SEV guest are encrypted, hypervisor access to
 the guest memory will return cipher text. If the guest policy allows debugging,
 then a hypervisor can use the DEBUG_DECRYPT and DEBUG_ENCRYPT commands to access
 the guest memory region for debug purposes.  This is not supported in QEMU yet.

 Snapshot/Restore
 ----------------

 TODO

 Live Migration
 ---------------

 TODO

 References
 ----------

 `AMD Memory Encryption whitepaper
 <https://developer.amd.com/wordpress/media/2013/12/AMD_Memory_Encryption_Whitepaper_v7-Public.pdf>`_

 .. [SEVKM] `Secure Encrypted Virtualization Key Management
    <http://developer.amd.com/wordpress/media/2017/11/55766_SEV-KM-API_Specification.pdf>`_

 KVM Forum slides:

 * `AMD’s Virtualization Memory Encryption (2016)
   <http://www.linux-kvm.org/images/7/74/02x08A-Thomas_Lendacky-AMDs_Virtualizatoin_Memory_Encryption_Technology.pdf>`_
 * `Extending Secure Encrypted Virtualization With SEV-ES (2018)
   <https://www.linux-kvm.org/images/9/94/Extending-Secure-Encrypted-Virtualization-with-SEV-ES-Thomas-Lendacky-AMD.pdf>`_

 `AMD64 Architecture Programmer's Manual:
 <http://support.amd.com/TechDocs/24593.pdf>`_

 * SME is section 7.10
 * SEV is section 15.34
 * SEV-ES is section 15.35
	AMD Secure Encrypted Virtualization (SEV)
	=========================================

	Secure Encrypted Virtualization (SEV) is a feature found on AMD processors.

	SEV is an extension to the AMD-V architecture which supports running encrypted
	virtual machines (VMs) under the control of KVM. Encrypted VMs have their pages
	(code and data) secured such that only the guest itself has access to the
	unencrypted version. Each encrypted VM is associated with a unique encryption
	key; if its data is accessed by a different entity using a different key the
	encrypted guests data will be incorrectly decrypted, leading to unintelligible
	data.

	Key management for this feature is handled by a separate processor known as the
	AMD secure processor (AMD-SP), which is present in AMD SOCs. Firmware running
	inside the AMD-SP provides commands to support a common VM lifecycle. This
	includes commands for launching, snapshotting, migrating and debugging the
	encrypted guest. These SEV commands can be issued via KVM_MEMORY_ENCRYPT_OP
	ioctls.

	Secure Encrypted Virtualization - Encrypted State (SEV-ES) builds on the SEV
	support to additionally protect the guest register state. In order to allow a
	hypervisor to perform functions on behalf of a guest, there is architectural
	support for notifying a guest's operating system when certain types of VMEXITs
	are about to occur. This allows the guest to selectively share information with
	the hypervisor to satisfy the requested function.

	Launching
	---------

	Boot images (such as bios) must be encrypted before a guest can be booted. The
	``MEMORY_ENCRYPT_OP`` ioctl provides commands to encrypt the images: ``LAUNCH_START``,
	``LAUNCH_UPDATE_DATA``, ``LAUNCH_MEASURE`` and ``LAUNCH_FINISH``. These four commands
	together generate a fresh memory encryption key for the VM, encrypt the boot
	images and provide a measurement than can be used as an attestation of a
	successful launch.

	For a SEV-ES guest, the ``LAUNCH_UPDATE_VMSA`` command is also used to encrypt the
	guest register state, or VM save area (VMSA), for all of the guest vCPUs.

	``LAUNCH_START`` is called first to create a cryptographic launch context within
	the firmware. To create this context, guest owner must provide a guest policy,
	its public Diffie-Hellman key (PDH) and session parameters. These inputs
	should be treated as a binary blob and must be passed as-is to the SEV firmware.

	The guest policy is passed as plaintext. A hypervisor may choose to read it,
	but should not modify it (any modification of the policy bits will result
	in bad measurement). The guest policy is a 4-byte data structure containing
	several flags that restricts what can be done on a running SEV guest.
	See KM Spec section 3 and 6.2 for more details.

	The guest policy can be provided via the ``policy`` property::

	# ${QEMU} \
	sev-guest,id=sev0,policy=0x1...\

	Setting the "SEV-ES required" policy bit (bit 2) will launch the guest as a
	SEV-ES guest::

	# ${QEMU} \
	sev-guest,id=sev0,policy=0x5...\

	The guest owner provided DH certificate and session parameters will be used to
	establish a cryptographic session with the guest owner to negotiate keys used
	for the attestation.

	The DH certificate and session blob can be provided via the ``dh-cert-file`` and
	``session-file`` properties::

	# ${QEMU} \
	sev-guest,id=sev0,dh-cert-file=<file1>,session-file=<file2>

	``LAUNCH_UPDATE_DATA`` encrypts the memory region using the cryptographic context
	created via the ``LAUNCH_START`` command. If required, this command can be called
	multiple times to encrypt different memory regions. The command also calculates
	the measurement of the memory contents as it encrypts.

	``LAUNCH_UPDATE_VMSA`` encrypts all the vCPU VMSAs for a SEV-ES guest using the
	cryptographic context created via the ``LAUNCH_START`` command. The command also
	calculates the measurement of the VMSAs as it encrypts them.

	``LAUNCH_MEASURE`` can be used to retrieve the measurement of encrypted memory and,
	for a SEV-ES guest, encrypted VMSAs. This measurement is a signature of the
	memory contents and, for a SEV-ES guest, the VMSA contents, that can be sent
	to the guest owner as an attestation that the memory and VMSAs were encrypted
	correctly by the firmware. The guest owner may wait to provide the guest
	confidential information until it can verify the attestation measurement.
	Since the guest owner knows the initial contents of the guest at boot, the
	attestation measurement can be verified by comparing it to what the guest owner
	expects.

	``LAUNCH_FINISH`` finalizes the guest launch and destroys the cryptographic
	context.

	See SEV KM API Spec ([SEVKM]_) 'Launching a guest' usage flow (Appendix A) for the
	complete flow chart.

	To launch a SEV guest::

	# ${QEMU} \
	-machine ...,confidential-guest-support=sev0 \
	-object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=1

	To launch a SEV-ES guest::

	# ${QEMU} \
	-machine ...,confidential-guest-support=sev0 \
	-object sev-guest,id=sev0,cbitpos=47,reduced-phys-bits=1,policy=0x5

	An SEV-ES guest has some restrictions as compared to a SEV guest. Because the
	guest register state is encrypted and cannot be updated by the VMM/hypervisor,
	a SEV-ES guest:

	- Does not support SMM - SMM support requires updating the guest register
	state.
	- Does not support reboot - a system reset requires updating the guest register
	state.
	- Requires in-kernel irqchip - the burden is placed on the hypervisor to
	manage booting APs.

	Debugging
	---------

	Since the memory contents of a SEV guest are encrypted, hypervisor access to
	the guest memory will return cipher text. If the guest policy allows debugging,
	then a hypervisor can use the DEBUG_DECRYPT and DEBUG_ENCRYPT commands to access
	the guest memory region for debug purposes. This is not supported in QEMU yet.

	Snapshot/Restore
	----------------

	TODO

	Live Migration
	---------------

	TODO

	References
	----------

	`AMD Memory Encryption whitepaper
	<https://developer.amd.com/wordpress/media/2013/12/AMD_Memory_Encryption_Whitepaper_v7-Public.pdf>`_

	.. [SEVKM] `Secure Encrypted Virtualization Key Management
	<http://developer.amd.com/wordpress/media/2017/11/55766_SEV-KM-API_Specification.pdf>`_

	KVM Forum slides:

	* `AMD’s Virtualization Memory Encryption (2016)
	<http://www.linux-kvm.org/images/7/74/02x08A-Thomas_Lendacky-AMDs_Virtualizatoin_Memory_Encryption_Technology.pdf>`_
	* `Extending Secure Encrypted Virtualization With SEV-ES (2018)
	<https://www.linux-kvm.org/images/9/94/Extending-Secure-Encrypted-Virtualization-with-SEV-ES-Thomas-Lendacky-AMD.pdf>`_

	`AMD64 Architecture Programmer's Manual:
	<http://support.amd.com/TechDocs/24593.pdf>`_

	* SME is section 7.10
	* SEV is section 15.34
	* SEV-ES is section 15.35