| /* |
| * QEMU ATI SVGA emulation |
| * |
| * Copyright (c) 2019 BALATON Zoltan |
| * |
| * This work is licensed under the GNU GPL license version 2 or later. |
| */ |
| |
| /* |
| * WARNING: |
| * This is very incomplete and only enough for Linux console and some |
| * unaccelerated X output at the moment. |
| * Currently it's little more than a frame buffer with minimal functions, |
| * other more advanced features of the hardware are yet to be implemented. |
| * We only aim for Rage 128 Pro (and some RV100) and 2D only at first, |
| * No 3D at all yet (maybe after 2D works, but feel free to improve it) |
| */ |
| |
| #include "ati_int.h" |
| #include "ati_regs.h" |
| #include "vga_regs.h" |
| #include "qemu/log.h" |
| #include "qemu/error-report.h" |
| #include "qapi/error.h" |
| #include "hw/hw.h" |
| #include "ui/console.h" |
| #include "trace.h" |
| |
| #define ATI_DEBUG_HW_CURSOR 0 |
| |
| static const struct { |
| const char *name; |
| uint16_t dev_id; |
| } ati_model_aliases[] = { |
| { "rage128p", PCI_DEVICE_ID_ATI_RAGE128_PF }, |
| { "rv100", PCI_DEVICE_ID_ATI_RADEON_QY }, |
| }; |
| |
| enum { VGA_MODE, EXT_MODE }; |
| |
| static void ati_vga_switch_mode(ATIVGAState *s) |
| { |
| DPRINTF("%d -> %d\n", |
| s->mode, !!(s->regs.crtc_gen_cntl & CRTC2_EXT_DISP_EN)); |
| if (s->regs.crtc_gen_cntl & CRTC2_EXT_DISP_EN) { |
| /* Extended mode enabled */ |
| s->mode = EXT_MODE; |
| if (s->regs.crtc_gen_cntl & CRTC2_EN) { |
| /* CRT controller enabled, use CRTC values */ |
| uint32_t offs = s->regs.crtc_offset & 0x07ffffff; |
| int stride = (s->regs.crtc_pitch & 0x7ff) * 8; |
| int bpp = 0; |
| int h, v; |
| |
| if (s->regs.crtc_h_total_disp == 0) { |
| s->regs.crtc_h_total_disp = ((640 / 8) - 1) << 16; |
| } |
| if (s->regs.crtc_v_total_disp == 0) { |
| s->regs.crtc_v_total_disp = (480 - 1) << 16; |
| } |
| h = ((s->regs.crtc_h_total_disp >> 16) + 1) * 8; |
| v = (s->regs.crtc_v_total_disp >> 16) + 1; |
| switch (s->regs.crtc_gen_cntl & CRTC_PIX_WIDTH_MASK) { |
| case CRTC_PIX_WIDTH_4BPP: |
| bpp = 4; |
| break; |
| case CRTC_PIX_WIDTH_8BPP: |
| bpp = 8; |
| break; |
| case CRTC_PIX_WIDTH_15BPP: |
| bpp = 15; |
| break; |
| case CRTC_PIX_WIDTH_16BPP: |
| bpp = 16; |
| break; |
| case CRTC_PIX_WIDTH_24BPP: |
| bpp = 24; |
| break; |
| case CRTC_PIX_WIDTH_32BPP: |
| bpp = 32; |
| break; |
| default: |
| qemu_log_mask(LOG_UNIMP, "Unsupported bpp value\n"); |
| } |
| assert(bpp != 0); |
| DPRINTF("Switching to %dx%d %d %d @ %x\n", h, v, stride, bpp, offs); |
| vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE); |
| vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_DISABLED); |
| /* reset VBE regs then set up mode */ |
| s->vga.vbe_regs[VBE_DISPI_INDEX_XRES] = h; |
| s->vga.vbe_regs[VBE_DISPI_INDEX_YRES] = v; |
| s->vga.vbe_regs[VBE_DISPI_INDEX_BPP] = bpp; |
| /* enable mode via ioport so it updates vga regs */ |
| vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE); |
| vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_ENABLED | |
| VBE_DISPI_LFB_ENABLED | VBE_DISPI_NOCLEARMEM | |
| (s->regs.dac_cntl & DAC_8BIT_EN ? VBE_DISPI_8BIT_DAC : 0)); |
| /* now set offset and stride after enable as that resets these */ |
| if (stride) { |
| vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_VIRT_WIDTH); |
| vbe_ioport_write_data(&s->vga, 0, stride); |
| if (offs % stride == 0) { |
| vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_Y_OFFSET); |
| vbe_ioport_write_data(&s->vga, 0, offs / stride); |
| } else { |
| /* FIXME what to do with this? */ |
| error_report("VGA offset is not multiple of pitch, " |
| "expect bad picture"); |
| } |
| } |
| } |
| } else { |
| /* VGA mode enabled */ |
| s->mode = VGA_MODE; |
| vbe_ioport_write_index(&s->vga, 0, VBE_DISPI_INDEX_ENABLE); |
| vbe_ioport_write_data(&s->vga, 0, VBE_DISPI_DISABLED); |
| } |
| } |
| |
| /* Used by host side hardware cursor */ |
| static void ati_cursor_define(ATIVGAState *s) |
| { |
| uint8_t data[1024]; |
| uint8_t *src; |
| int i, j, idx = 0; |
| |
| if ((s->regs.cur_offset & BIT(31)) || s->cursor_guest_mode) { |
| return; /* Do not update cursor if locked or rendered by guest */ |
| } |
| /* FIXME handle cur_hv_offs correctly */ |
| src = s->vga.vram_ptr + (s->regs.crtc_offset & 0x07ffffff) + |
| s->regs.cur_offset - (s->regs.cur_hv_offs >> 16) - |
| (s->regs.cur_hv_offs & 0xffff) * 16; |
| for (i = 0; i < 64; i++) { |
| for (j = 0; j < 8; j++, idx++) { |
| data[idx] = src[i * 16 + j]; |
| data[512 + idx] = src[i * 16 + j + 8]; |
| } |
| } |
| if (!s->cursor) { |
| s->cursor = cursor_alloc(64, 64); |
| } |
| cursor_set_mono(s->cursor, s->regs.cur_color1, s->regs.cur_color0, |
| &data[512], 1, &data[0]); |
| dpy_cursor_define(s->vga.con, s->cursor); |
| } |
| |
| /* Alternatively support guest rendered hardware cursor */ |
| static void ati_cursor_invalidate(VGACommonState *vga) |
| { |
| ATIVGAState *s = container_of(vga, ATIVGAState, vga); |
| int size = (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) ? 64 : 0; |
| |
| if (s->regs.cur_offset & BIT(31)) { |
| return; /* Do not update cursor if locked */ |
| } |
| if (s->cursor_size != size || |
| vga->hw_cursor_x != s->regs.cur_hv_pos >> 16 || |
| vga->hw_cursor_y != (s->regs.cur_hv_pos & 0xffff) || |
| s->cursor_offset != s->regs.cur_offset - (s->regs.cur_hv_offs >> 16) - |
| (s->regs.cur_hv_offs & 0xffff) * 16) { |
| /* Remove old cursor then update and show new one if needed */ |
| vga_invalidate_scanlines(vga, vga->hw_cursor_y, vga->hw_cursor_y + 63); |
| vga->hw_cursor_x = s->regs.cur_hv_pos >> 16; |
| vga->hw_cursor_y = s->regs.cur_hv_pos & 0xffff; |
| s->cursor_offset = s->regs.cur_offset - (s->regs.cur_hv_offs >> 16) - |
| (s->regs.cur_hv_offs & 0xffff) * 16; |
| s->cursor_size = size; |
| if (size) { |
| vga_invalidate_scanlines(vga, |
| vga->hw_cursor_y, vga->hw_cursor_y + 63); |
| } |
| } |
| } |
| |
| static void ati_cursor_draw_line(VGACommonState *vga, uint8_t *d, int scr_y) |
| { |
| ATIVGAState *s = container_of(vga, ATIVGAState, vga); |
| uint8_t *src; |
| uint32_t *dp = (uint32_t *)d; |
| int i, j, h; |
| |
| if (!(s->regs.crtc_gen_cntl & CRTC2_CUR_EN) || |
| scr_y < vga->hw_cursor_y || scr_y >= vga->hw_cursor_y + 64 || |
| scr_y > s->regs.crtc_v_total_disp >> 16) { |
| return; |
| } |
| /* FIXME handle cur_hv_offs correctly */ |
| src = s->vga.vram_ptr + (s->regs.crtc_offset & 0x07ffffff) + |
| s->cursor_offset + (scr_y - vga->hw_cursor_y) * 16; |
| dp = &dp[vga->hw_cursor_x]; |
| h = ((s->regs.crtc_h_total_disp >> 16) + 1) * 8; |
| for (i = 0; i < 8; i++) { |
| uint32_t color; |
| uint8_t abits = src[i]; |
| uint8_t xbits = src[i + 8]; |
| for (j = 0; j < 8; j++, abits <<= 1, xbits <<= 1) { |
| if (abits & BIT(7)) { |
| if (xbits & BIT(7)) { |
| color = dp[i * 8 + j] ^ 0xffffffff; /* complement */ |
| } else { |
| continue; /* transparent, no change */ |
| } |
| } else { |
| color = (xbits & BIT(7) ? s->regs.cur_color1 : |
| s->regs.cur_color0) << 8 | 0xff; |
| } |
| if (vga->hw_cursor_x + i * 8 + j >= h) { |
| return; /* end of screen, don't span to next line */ |
| } |
| dp[i * 8 + j] = color; |
| } |
| } |
| } |
| |
| static inline uint64_t ati_reg_read_offs(uint32_t reg, int offs, |
| unsigned int size) |
| { |
| if (offs == 0 && size == 4) { |
| return reg; |
| } else { |
| return extract32(reg, offs * BITS_PER_BYTE, size * BITS_PER_BYTE); |
| } |
| } |
| |
| static uint64_t ati_mm_read(void *opaque, hwaddr addr, unsigned int size) |
| { |
| ATIVGAState *s = opaque; |
| uint64_t val = 0; |
| |
| switch (addr) { |
| case MM_INDEX: |
| val = s->regs.mm_index; |
| break; |
| case MM_DATA ... MM_DATA + 3: |
| /* indexed access to regs or memory */ |
| if (s->regs.mm_index & BIT(31)) { |
| if (s->regs.mm_index <= s->vga.vram_size - size) { |
| int i = size - 1; |
| while (i >= 0) { |
| val <<= 8; |
| val |= s->vga.vram_ptr[s->regs.mm_index + i--]; |
| } |
| } |
| } else { |
| val = ati_mm_read(s, s->regs.mm_index + addr - MM_DATA, size); |
| } |
| break; |
| case BIOS_0_SCRATCH ... BUS_CNTL - 1: |
| { |
| int i = (addr - BIOS_0_SCRATCH) / 4; |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF && i > 3) { |
| break; |
| } |
| val = ati_reg_read_offs(s->regs.bios_scratch[i], |
| addr - (BIOS_0_SCRATCH + i * 4), size); |
| break; |
| } |
| case CRTC_GEN_CNTL ... CRTC_GEN_CNTL + 3: |
| val = ati_reg_read_offs(s->regs.crtc_gen_cntl, |
| addr - CRTC_GEN_CNTL, size); |
| break; |
| case CRTC_EXT_CNTL ... CRTC_EXT_CNTL + 3: |
| val = ati_reg_read_offs(s->regs.crtc_ext_cntl, |
| addr - CRTC_EXT_CNTL, size); |
| break; |
| case DAC_CNTL: |
| val = s->regs.dac_cntl; |
| break; |
| /* case GPIO_MONID: FIXME hook up DDC I2C here */ |
| case PALETTE_INDEX: |
| /* FIXME unaligned access */ |
| val = vga_ioport_read(&s->vga, VGA_PEL_IR) << 16; |
| val |= vga_ioport_read(&s->vga, VGA_PEL_IW) & 0xff; |
| break; |
| case PALETTE_DATA: |
| val = vga_ioport_read(&s->vga, VGA_PEL_D); |
| break; |
| case CNFG_MEMSIZE: |
| val = s->vga.vram_size; |
| break; |
| case MC_STATUS: |
| val = 5; |
| break; |
| case RBBM_STATUS: |
| case GUI_STAT: |
| val = 64; /* free CMDFIFO entries */ |
| break; |
| case CRTC_H_TOTAL_DISP: |
| val = s->regs.crtc_h_total_disp; |
| break; |
| case CRTC_H_SYNC_STRT_WID: |
| val = s->regs.crtc_h_sync_strt_wid; |
| break; |
| case CRTC_V_TOTAL_DISP: |
| val = s->regs.crtc_v_total_disp; |
| break; |
| case CRTC_V_SYNC_STRT_WID: |
| val = s->regs.crtc_v_sync_strt_wid; |
| break; |
| case CRTC_OFFSET: |
| val = s->regs.crtc_offset; |
| break; |
| case CRTC_OFFSET_CNTL: |
| val = s->regs.crtc_offset_cntl; |
| break; |
| case CRTC_PITCH: |
| val = s->regs.crtc_pitch; |
| break; |
| case 0xf00 ... 0xfff: |
| val = pci_default_read_config(&s->dev, addr - 0xf00, size); |
| break; |
| case CUR_OFFSET: |
| val = s->regs.cur_offset; |
| break; |
| case CUR_HORZ_VERT_POSN: |
| val = s->regs.cur_hv_pos; |
| val |= s->regs.cur_offset & BIT(31); |
| break; |
| case CUR_HORZ_VERT_OFF: |
| val = s->regs.cur_hv_offs; |
| val |= s->regs.cur_offset & BIT(31); |
| break; |
| case CUR_CLR0: |
| val = s->regs.cur_color0; |
| break; |
| case CUR_CLR1: |
| val = s->regs.cur_color1; |
| break; |
| case DST_OFFSET: |
| val = s->regs.dst_offset; |
| break; |
| case DST_PITCH: |
| val = s->regs.dst_pitch; |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| val &= s->regs.dst_tile << 16; |
| } |
| break; |
| case DST_WIDTH: |
| val = s->regs.dst_width; |
| break; |
| case DST_HEIGHT: |
| val = s->regs.dst_height; |
| break; |
| case SRC_X: |
| val = s->regs.src_x; |
| break; |
| case SRC_Y: |
| val = s->regs.src_y; |
| break; |
| case DST_X: |
| val = s->regs.dst_x; |
| break; |
| case DST_Y: |
| val = s->regs.dst_y; |
| break; |
| case DP_GUI_MASTER_CNTL: |
| val = s->regs.dp_gui_master_cntl; |
| break; |
| case SRC_OFFSET: |
| val = s->regs.src_offset; |
| break; |
| case SRC_PITCH: |
| val = s->regs.src_pitch; |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| val &= s->regs.src_tile << 16; |
| } |
| break; |
| case DP_BRUSH_BKGD_CLR: |
| val = s->regs.dp_brush_bkgd_clr; |
| break; |
| case DP_BRUSH_FRGD_CLR: |
| val = s->regs.dp_brush_frgd_clr; |
| break; |
| case DP_SRC_FRGD_CLR: |
| val = s->regs.dp_src_frgd_clr; |
| break; |
| case DP_SRC_BKGD_CLR: |
| val = s->regs.dp_src_bkgd_clr; |
| break; |
| case DP_CNTL: |
| val = s->regs.dp_cntl; |
| break; |
| case DP_DATATYPE: |
| val = s->regs.dp_datatype; |
| break; |
| case DP_MIX: |
| val = s->regs.dp_mix; |
| break; |
| case DP_WRITE_MASK: |
| val = s->regs.dp_write_mask; |
| break; |
| case DEFAULT_OFFSET: |
| val = s->regs.default_offset; |
| break; |
| case DEFAULT_PITCH: |
| val = s->regs.default_pitch; |
| break; |
| case DEFAULT_SC_BOTTOM_RIGHT: |
| val = s->regs.default_sc_bottom_right; |
| break; |
| default: |
| break; |
| } |
| if (addr < CUR_OFFSET || addr > CUR_CLR1 || ATI_DEBUG_HW_CURSOR) { |
| trace_ati_mm_read(size, addr, ati_reg_name(addr & ~3ULL), val); |
| } |
| return val; |
| } |
| |
| static inline void ati_reg_write_offs(uint32_t *reg, int offs, |
| uint64_t data, unsigned int size) |
| { |
| if (offs == 0 && size == 4) { |
| *reg = data; |
| } else { |
| *reg = deposit32(*reg, offs * BITS_PER_BYTE, size * BITS_PER_BYTE, |
| data); |
| } |
| } |
| |
| static void ati_mm_write(void *opaque, hwaddr addr, |
| uint64_t data, unsigned int size) |
| { |
| ATIVGAState *s = opaque; |
| |
| if (addr < CUR_OFFSET || addr > CUR_CLR1 || ATI_DEBUG_HW_CURSOR) { |
| trace_ati_mm_write(size, addr, ati_reg_name(addr & ~3ULL), data); |
| } |
| switch (addr) { |
| case MM_INDEX: |
| s->regs.mm_index = data; |
| break; |
| case MM_DATA ... MM_DATA + 3: |
| /* indexed access to regs or memory */ |
| if (s->regs.mm_index & BIT(31)) { |
| if (s->regs.mm_index <= s->vga.vram_size - size) { |
| int i = 0; |
| while (i < size) { |
| s->vga.vram_ptr[s->regs.mm_index + i] = data & 0xff; |
| data >>= 8; |
| } |
| } |
| } else { |
| ati_mm_write(s, s->regs.mm_index + addr - MM_DATA, data, size); |
| } |
| break; |
| case BIOS_0_SCRATCH ... BUS_CNTL - 1: |
| { |
| int i = (addr - BIOS_0_SCRATCH) / 4; |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF && i > 3) { |
| break; |
| } |
| ati_reg_write_offs(&s->regs.bios_scratch[i], |
| addr - (BIOS_0_SCRATCH + i * 4), data, size); |
| break; |
| } |
| case CRTC_GEN_CNTL ... CRTC_GEN_CNTL + 3: |
| { |
| uint32_t val = s->regs.crtc_gen_cntl; |
| ati_reg_write_offs(&s->regs.crtc_gen_cntl, |
| addr - CRTC_GEN_CNTL, data, size); |
| if ((val & CRTC2_CUR_EN) != (s->regs.crtc_gen_cntl & CRTC2_CUR_EN)) { |
| if (s->cursor_guest_mode) { |
| s->vga.force_shadow = !!(s->regs.crtc_gen_cntl & CRTC2_CUR_EN); |
| } else { |
| if (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) { |
| ati_cursor_define(s); |
| } |
| dpy_mouse_set(s->vga.con, s->regs.cur_hv_pos >> 16, |
| s->regs.cur_hv_pos & 0xffff, |
| (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) != 0); |
| } |
| } |
| if ((val & (CRTC2_EXT_DISP_EN | CRTC2_EN)) != |
| (s->regs.crtc_gen_cntl & (CRTC2_EXT_DISP_EN | CRTC2_EN))) { |
| ati_vga_switch_mode(s); |
| } |
| break; |
| } |
| case CRTC_EXT_CNTL ... CRTC_EXT_CNTL + 3: |
| { |
| uint32_t val = s->regs.crtc_ext_cntl; |
| ati_reg_write_offs(&s->regs.crtc_ext_cntl, |
| addr - CRTC_EXT_CNTL, data, size); |
| if (s->regs.crtc_ext_cntl & CRT_CRTC_DISPLAY_DIS) { |
| DPRINTF("Display disabled\n"); |
| s->vga.ar_index &= ~BIT(5); |
| } else { |
| DPRINTF("Display enabled\n"); |
| s->vga.ar_index |= BIT(5); |
| ati_vga_switch_mode(s); |
| } |
| if ((val & CRT_CRTC_DISPLAY_DIS) != |
| (s->regs.crtc_ext_cntl & CRT_CRTC_DISPLAY_DIS)) { |
| ati_vga_switch_mode(s); |
| } |
| break; |
| } |
| case DAC_CNTL: |
| s->regs.dac_cntl = data & 0xffffe3ff; |
| s->vga.dac_8bit = !!(data & DAC_8BIT_EN); |
| break; |
| /* case GPIO_MONID: FIXME hook up DDC I2C here */ |
| case PALETTE_INDEX ... PALETTE_INDEX + 3: |
| if (size == 4) { |
| vga_ioport_write(&s->vga, VGA_PEL_IR, (data >> 16) & 0xff); |
| vga_ioport_write(&s->vga, VGA_PEL_IW, data & 0xff); |
| } else { |
| if (addr == PALETTE_INDEX) { |
| vga_ioport_write(&s->vga, VGA_PEL_IW, data & 0xff); |
| } else { |
| vga_ioport_write(&s->vga, VGA_PEL_IR, data & 0xff); |
| } |
| } |
| break; |
| case PALETTE_DATA ... PALETTE_DATA + 3: |
| data <<= addr - PALETTE_DATA; |
| data = bswap32(data) >> 8; |
| vga_ioport_write(&s->vga, VGA_PEL_D, data & 0xff); |
| data >>= 8; |
| vga_ioport_write(&s->vga, VGA_PEL_D, data & 0xff); |
| data >>= 8; |
| vga_ioport_write(&s->vga, VGA_PEL_D, data & 0xff); |
| break; |
| case CRTC_H_TOTAL_DISP: |
| s->regs.crtc_h_total_disp = data & 0x07ff07ff; |
| break; |
| case CRTC_H_SYNC_STRT_WID: |
| s->regs.crtc_h_sync_strt_wid = data & 0x17bf1fff; |
| break; |
| case CRTC_V_TOTAL_DISP: |
| s->regs.crtc_v_total_disp = data & 0x0fff0fff; |
| break; |
| case CRTC_V_SYNC_STRT_WID: |
| s->regs.crtc_v_sync_strt_wid = data & 0x9f0fff; |
| break; |
| case CRTC_OFFSET: |
| s->regs.crtc_offset = data & 0xc7ffffff; |
| break; |
| case CRTC_OFFSET_CNTL: |
| s->regs.crtc_offset_cntl = data; /* FIXME */ |
| break; |
| case CRTC_PITCH: |
| s->regs.crtc_pitch = data & 0x07ff07ff; |
| break; |
| case 0xf00 ... 0xfff: |
| /* read-only copy of PCI config space so ignore writes */ |
| break; |
| case CUR_OFFSET: |
| if (s->regs.cur_offset != (data & 0x87fffff0)) { |
| s->regs.cur_offset = data & 0x87fffff0; |
| ati_cursor_define(s); |
| } |
| break; |
| case CUR_HORZ_VERT_POSN: |
| s->regs.cur_hv_pos = data & 0x3fff0fff; |
| if (data & BIT(31)) { |
| s->regs.cur_offset |= data & BIT(31); |
| } else if (s->regs.cur_offset & BIT(31)) { |
| s->regs.cur_offset &= ~BIT(31); |
| ati_cursor_define(s); |
| } |
| if (!s->cursor_guest_mode && |
| (s->regs.crtc_gen_cntl & CRTC2_CUR_EN) && !(data & BIT(31))) { |
| dpy_mouse_set(s->vga.con, s->regs.cur_hv_pos >> 16, |
| s->regs.cur_hv_pos & 0xffff, 1); |
| } |
| break; |
| case CUR_HORZ_VERT_OFF: |
| s->regs.cur_hv_offs = data & 0x3f003f; |
| if (data & BIT(31)) { |
| s->regs.cur_offset |= data & BIT(31); |
| } else if (s->regs.cur_offset & BIT(31)) { |
| s->regs.cur_offset &= ~BIT(31); |
| ati_cursor_define(s); |
| } |
| break; |
| case CUR_CLR0: |
| if (s->regs.cur_color0 != (data & 0xffffff)) { |
| s->regs.cur_color0 = data & 0xffffff; |
| ati_cursor_define(s); |
| } |
| break; |
| case CUR_CLR1: |
| /* |
| * Update cursor unconditionally here because some clients set up |
| * other registers before actually writing cursor data to memory at |
| * offset so we would miss cursor change unless always updating here |
| */ |
| s->regs.cur_color1 = data & 0xffffff; |
| ati_cursor_define(s); |
| break; |
| case DST_OFFSET: |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| s->regs.dst_offset = data & 0xfffffff0; |
| } else { |
| s->regs.dst_offset = data & 0xfffffc00; |
| } |
| break; |
| case DST_PITCH: |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| s->regs.dst_pitch = data & 0x3fff; |
| s->regs.dst_tile = (data >> 16) & 1; |
| } else { |
| s->regs.dst_pitch = data & 0x3ff0; |
| } |
| break; |
| case DST_TILE: |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RADEON_QY) { |
| s->regs.dst_tile = data & 3; |
| } |
| break; |
| case DST_WIDTH: |
| s->regs.dst_width = data & 0x3fff; |
| ati_2d_blt(s); |
| break; |
| case DST_HEIGHT: |
| s->regs.dst_height = data & 0x3fff; |
| break; |
| case SRC_X: |
| s->regs.src_x = data & 0x3fff; |
| break; |
| case SRC_Y: |
| s->regs.src_y = data & 0x3fff; |
| break; |
| case DST_X: |
| s->regs.dst_x = data & 0x3fff; |
| break; |
| case DST_Y: |
| s->regs.dst_y = data & 0x3fff; |
| break; |
| case SRC_PITCH_OFFSET: |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| s->regs.src_offset = (data & 0x1fffff) << 5; |
| s->regs.src_pitch = (data >> 21) & 0x3ff; |
| s->regs.src_tile = data >> 31; |
| } else { |
| s->regs.src_offset = (data & 0x3fffff) << 11; |
| s->regs.src_pitch = (data & 0x3fc00000) >> 16; |
| s->regs.src_tile = (data >> 30) & 1; |
| } |
| break; |
| case DST_PITCH_OFFSET: |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| s->regs.dst_offset = (data & 0x1fffff) << 5; |
| s->regs.dst_pitch = (data >> 21) & 0x3ff; |
| s->regs.dst_tile = data >> 31; |
| } else { |
| s->regs.dst_offset = (data & 0x3fffff) << 11; |
| s->regs.dst_pitch = (data & 0x3fc00000) >> 16; |
| s->regs.dst_tile = data >> 30; |
| } |
| break; |
| case SRC_Y_X: |
| s->regs.src_x = data & 0x3fff; |
| s->regs.src_y = (data >> 16) & 0x3fff; |
| break; |
| case DST_Y_X: |
| s->regs.dst_x = data & 0x3fff; |
| s->regs.dst_y = (data >> 16) & 0x3fff; |
| break; |
| case DST_HEIGHT_WIDTH: |
| s->regs.dst_width = data & 0x3fff; |
| s->regs.dst_height = (data >> 16) & 0x3fff; |
| ati_2d_blt(s); |
| break; |
| case DP_GUI_MASTER_CNTL: |
| s->regs.dp_gui_master_cntl = data & 0xf800000f; |
| s->regs.dp_datatype = (data & 0x0f00) >> 8 | (data & 0x30f0) << 4 | |
| (data & 0x4000) << 16; |
| s->regs.dp_mix = (data & GMC_ROP3_MASK) | (data & 0x7000000) >> 16; |
| break; |
| case DST_WIDTH_X: |
| s->regs.dst_x = data & 0x3fff; |
| s->regs.dst_width = (data >> 16) & 0x3fff; |
| ati_2d_blt(s); |
| break; |
| case SRC_X_Y: |
| s->regs.src_y = data & 0x3fff; |
| s->regs.src_x = (data >> 16) & 0x3fff; |
| break; |
| case DST_X_Y: |
| s->regs.dst_y = data & 0x3fff; |
| s->regs.dst_x = (data >> 16) & 0x3fff; |
| break; |
| case DST_WIDTH_HEIGHT: |
| s->regs.dst_height = data & 0x3fff; |
| s->regs.dst_width = (data >> 16) & 0x3fff; |
| ati_2d_blt(s); |
| break; |
| case DST_HEIGHT_Y: |
| s->regs.dst_y = data & 0x3fff; |
| s->regs.dst_height = (data >> 16) & 0x3fff; |
| break; |
| case SRC_OFFSET: |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| s->regs.src_offset = data & 0xfffffff0; |
| } else { |
| s->regs.src_offset = data & 0xfffffc00; |
| } |
| break; |
| case SRC_PITCH: |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| s->regs.src_pitch = data & 0x3fff; |
| s->regs.src_tile = (data >> 16) & 1; |
| } else { |
| s->regs.src_pitch = data & 0x3ff0; |
| } |
| break; |
| case DP_BRUSH_BKGD_CLR: |
| s->regs.dp_brush_bkgd_clr = data; |
| break; |
| case DP_BRUSH_FRGD_CLR: |
| s->regs.dp_brush_frgd_clr = data; |
| break; |
| case DP_CNTL: |
| s->regs.dp_cntl = data; |
| break; |
| case DP_DATATYPE: |
| s->regs.dp_datatype = data & 0xe0070f0f; |
| break; |
| case DP_MIX: |
| s->regs.dp_mix = data & 0x00ff0700; |
| break; |
| case DP_WRITE_MASK: |
| s->regs.dp_write_mask = data; |
| break; |
| case DEFAULT_OFFSET: |
| data &= (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF ? |
| 0x03fffc00 : 0xfffffc00); |
| s->regs.default_offset = data; |
| break; |
| case DEFAULT_PITCH: |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RAGE128_PF) { |
| s->regs.default_pitch = data & 0x103ff; |
| } |
| break; |
| case DEFAULT_SC_BOTTOM_RIGHT: |
| s->regs.default_sc_bottom_right = data & 0x3fff3fff; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static const MemoryRegionOps ati_mm_ops = { |
| .read = ati_mm_read, |
| .write = ati_mm_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static void ati_vga_realize(PCIDevice *dev, Error **errp) |
| { |
| ATIVGAState *s = ATI_VGA(dev); |
| VGACommonState *vga = &s->vga; |
| |
| if (s->model) { |
| int i; |
| for (i = 0; i < ARRAY_SIZE(ati_model_aliases); i++) { |
| if (!strcmp(s->model, ati_model_aliases[i].name)) { |
| s->dev_id = ati_model_aliases[i].dev_id; |
| break; |
| } |
| } |
| if (i >= ARRAY_SIZE(ati_model_aliases)) { |
| warn_report("Unknown ATI VGA model name, " |
| "using default rage128p"); |
| } |
| } |
| if (s->dev_id != PCI_DEVICE_ID_ATI_RAGE128_PF && |
| s->dev_id != PCI_DEVICE_ID_ATI_RADEON_QY) { |
| error_setg(errp, "Unknown ATI VGA device id, " |
| "only 0x5046 and 0x5159 are supported"); |
| return; |
| } |
| pci_set_word(dev->config + PCI_DEVICE_ID, s->dev_id); |
| |
| if (s->dev_id == PCI_DEVICE_ID_ATI_RADEON_QY && |
| s->vga.vram_size_mb < 16) { |
| warn_report("Too small video memory for device id"); |
| s->vga.vram_size_mb = 16; |
| } |
| |
| /* init vga bits */ |
| vga_common_init(vga, OBJECT(s)); |
| vga_init(vga, OBJECT(s), pci_address_space(dev), |
| pci_address_space_io(dev), true); |
| vga->con = graphic_console_init(DEVICE(s), 0, s->vga.hw_ops, &s->vga); |
| if (s->cursor_guest_mode) { |
| vga->cursor_invalidate = ati_cursor_invalidate; |
| vga->cursor_draw_line = ati_cursor_draw_line; |
| } |
| |
| /* mmio register space */ |
| memory_region_init_io(&s->mm, OBJECT(s), &ati_mm_ops, s, |
| "ati.mmregs", 0x4000); |
| /* io space is alias to beginning of mmregs */ |
| memory_region_init_alias(&s->io, OBJECT(s), "ati.io", &s->mm, 0, 0x100); |
| |
| pci_register_bar(dev, 0, PCI_BASE_ADDRESS_MEM_PREFETCH, &vga->vram); |
| pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_IO, &s->io); |
| pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mm); |
| } |
| |
| static void ati_vga_reset(DeviceState *dev) |
| { |
| ATIVGAState *s = ATI_VGA(dev); |
| |
| /* reset vga */ |
| vga_common_reset(&s->vga); |
| s->mode = VGA_MODE; |
| } |
| |
| static void ati_vga_exit(PCIDevice *dev) |
| { |
| ATIVGAState *s = ATI_VGA(dev); |
| |
| graphic_console_close(s->vga.con); |
| } |
| |
| static Property ati_vga_properties[] = { |
| DEFINE_PROP_UINT32("vgamem_mb", ATIVGAState, vga.vram_size_mb, 16), |
| DEFINE_PROP_STRING("model", ATIVGAState, model), |
| DEFINE_PROP_UINT16("x-device-id", ATIVGAState, dev_id, |
| PCI_DEVICE_ID_ATI_RAGE128_PF), |
| DEFINE_PROP_BOOL("guest_hwcursor", ATIVGAState, cursor_guest_mode, false), |
| DEFINE_PROP_END_OF_LIST() |
| }; |
| |
| static void ati_vga_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| dc->reset = ati_vga_reset; |
| dc->props = ati_vga_properties; |
| dc->hotpluggable = false; |
| set_bit(DEVICE_CATEGORY_DISPLAY, dc->categories); |
| |
| k->class_id = PCI_CLASS_DISPLAY_VGA; |
| k->vendor_id = PCI_VENDOR_ID_ATI; |
| k->device_id = PCI_DEVICE_ID_ATI_RAGE128_PF; |
| k->romfile = "vgabios-stdvga.bin"; |
| k->realize = ati_vga_realize; |
| k->exit = ati_vga_exit; |
| } |
| |
| static const TypeInfo ati_vga_info = { |
| .name = TYPE_ATI_VGA, |
| .parent = TYPE_PCI_DEVICE, |
| .instance_size = sizeof(ATIVGAState), |
| .class_init = ati_vga_class_init, |
| .interfaces = (InterfaceInfo[]) { |
| { INTERFACE_CONVENTIONAL_PCI_DEVICE }, |
| { }, |
| }, |
| }; |
| |
| static void ati_vga_register_types(void) |
| { |
| type_register_static(&ati_vga_info); |
| } |
| |
| type_init(ati_vga_register_types) |
