|  | /* | 
|  | * QEMU Parallel PORT emulation | 
|  | * | 
|  | * Copyright (c) 2003-2005 Fabrice Bellard | 
|  | * Copyright (c) 2007 Marko Kohtala | 
|  | * | 
|  | * Permission is hereby granted, free of charge, to any person obtaining a copy | 
|  | * of this software and associated documentation files (the "Software"), to deal | 
|  | * in the Software without restriction, including without limitation the rights | 
|  | * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell | 
|  | * copies of the Software, and to permit persons to whom the Software is | 
|  | * furnished to do so, subject to the following conditions: | 
|  | * | 
|  | * The above copyright notice and this permission notice shall be included in | 
|  | * all copies or substantial portions of the Software. | 
|  | * | 
|  | * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | 
|  | * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | 
|  | * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | 
|  | * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER | 
|  | * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, | 
|  | * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN | 
|  | * THE SOFTWARE. | 
|  | */ | 
|  |  | 
|  | #include "qemu/osdep.h" | 
|  | #include "qapi/error.h" | 
|  | #include "qemu/module.h" | 
|  | #include "chardev/char-parallel.h" | 
|  | #include "chardev/char-fe.h" | 
|  | #include "hw/acpi/acpi_aml_interface.h" | 
|  | #include "hw/irq.h" | 
|  | #include "hw/isa/isa.h" | 
|  | #include "hw/qdev-properties.h" | 
|  | #include "hw/qdev-properties-system.h" | 
|  | #include "migration/vmstate.h" | 
|  | #include "hw/char/parallel.h" | 
|  | #include "sysemu/reset.h" | 
|  | #include "sysemu/sysemu.h" | 
|  | #include "trace.h" | 
|  | #include "qom/object.h" | 
|  |  | 
|  | //#define DEBUG_PARALLEL | 
|  |  | 
|  | #ifdef DEBUG_PARALLEL | 
|  | #define pdebug(fmt, ...) printf("pp: " fmt, ## __VA_ARGS__) | 
|  | #else | 
|  | #define pdebug(fmt, ...) ((void)0) | 
|  | #endif | 
|  |  | 
|  | #define PARA_REG_DATA 0 | 
|  | #define PARA_REG_STS 1 | 
|  | #define PARA_REG_CTR 2 | 
|  | #define PARA_REG_EPP_ADDR 3 | 
|  | #define PARA_REG_EPP_DATA 4 | 
|  |  | 
|  | /* | 
|  | * These are the definitions for the Printer Status Register | 
|  | */ | 
|  | #define PARA_STS_BUSY   0x80    /* Busy complement */ | 
|  | #define PARA_STS_ACK    0x40    /* Acknowledge */ | 
|  | #define PARA_STS_PAPER  0x20    /* Out of paper */ | 
|  | #define PARA_STS_ONLINE 0x10    /* Online */ | 
|  | #define PARA_STS_ERROR  0x08    /* Error complement */ | 
|  | #define PARA_STS_TMOUT  0x01    /* EPP timeout */ | 
|  |  | 
|  | /* | 
|  | * These are the definitions for the Printer Control Register | 
|  | */ | 
|  | #define PARA_CTR_DIR    0x20    /* Direction (1=read, 0=write) */ | 
|  | #define PARA_CTR_INTEN  0x10    /* IRQ Enable */ | 
|  | #define PARA_CTR_SELECT 0x08    /* Select In complement */ | 
|  | #define PARA_CTR_INIT   0x04    /* Initialize Printer complement */ | 
|  | #define PARA_CTR_AUTOLF 0x02    /* Auto linefeed complement */ | 
|  | #define PARA_CTR_STROBE 0x01    /* Strobe complement */ | 
|  |  | 
|  | #define PARA_CTR_SIGNAL (PARA_CTR_SELECT|PARA_CTR_INIT|PARA_CTR_AUTOLF|PARA_CTR_STROBE) | 
|  |  | 
|  | typedef struct ParallelState { | 
|  | MemoryRegion iomem; | 
|  | uint8_t dataw; | 
|  | uint8_t datar; | 
|  | uint8_t status; | 
|  | uint8_t control; | 
|  | qemu_irq irq; | 
|  | int irq_pending; | 
|  | CharBackend chr; | 
|  | int hw_driver; | 
|  | int epp_timeout; | 
|  | uint32_t last_read_offset; /* For debugging */ | 
|  | /* Memory-mapped interface */ | 
|  | int it_shift; | 
|  | PortioList portio_list; | 
|  | } ParallelState; | 
|  |  | 
|  | OBJECT_DECLARE_SIMPLE_TYPE(ISAParallelState, ISA_PARALLEL) | 
|  |  | 
|  | struct ISAParallelState { | 
|  | ISADevice parent_obj; | 
|  |  | 
|  | uint32_t index; | 
|  | uint32_t iobase; | 
|  | uint32_t isairq; | 
|  | ParallelState state; | 
|  | }; | 
|  |  | 
|  | static void parallel_update_irq(ParallelState *s) | 
|  | { | 
|  | if (s->irq_pending) | 
|  | qemu_irq_raise(s->irq); | 
|  | else | 
|  | qemu_irq_lower(s->irq); | 
|  | } | 
|  |  | 
|  | static void | 
|  | parallel_ioport_write_sw(void *opaque, uint32_t addr, uint32_t val) | 
|  | { | 
|  | ParallelState *s = opaque; | 
|  |  | 
|  | addr &= 7; | 
|  | trace_parallel_ioport_write("SW", addr, val); | 
|  | switch(addr) { | 
|  | case PARA_REG_DATA: | 
|  | s->dataw = val; | 
|  | parallel_update_irq(s); | 
|  | break; | 
|  | case PARA_REG_CTR: | 
|  | val |= 0xc0; | 
|  | if ((val & PARA_CTR_INIT) == 0 ) { | 
|  | s->status = PARA_STS_BUSY; | 
|  | s->status |= PARA_STS_ACK; | 
|  | s->status |= PARA_STS_ONLINE; | 
|  | s->status |= PARA_STS_ERROR; | 
|  | } | 
|  | else if (val & PARA_CTR_SELECT) { | 
|  | if (val & PARA_CTR_STROBE) { | 
|  | s->status &= ~PARA_STS_BUSY; | 
|  | if ((s->control & PARA_CTR_STROBE) == 0) | 
|  | /* XXX this blocks entire thread. Rewrite to use | 
|  | * qemu_chr_fe_write and background I/O callbacks */ | 
|  | qemu_chr_fe_write_all(&s->chr, &s->dataw, 1); | 
|  | } else { | 
|  | if (s->control & PARA_CTR_INTEN) { | 
|  | s->irq_pending = 1; | 
|  | } | 
|  | } | 
|  | } | 
|  | parallel_update_irq(s); | 
|  | s->control = val; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void parallel_ioport_write_hw(void *opaque, uint32_t addr, uint32_t val) | 
|  | { | 
|  | ParallelState *s = opaque; | 
|  | uint8_t parm = val; | 
|  | int dir; | 
|  |  | 
|  | /* Sometimes programs do several writes for timing purposes on old | 
|  | HW. Take care not to waste time on writes that do nothing. */ | 
|  |  | 
|  | s->last_read_offset = ~0U; | 
|  |  | 
|  | addr &= 7; | 
|  | trace_parallel_ioport_write("HW", addr, val); | 
|  | switch(addr) { | 
|  | case PARA_REG_DATA: | 
|  | if (s->dataw == val) | 
|  | return; | 
|  | pdebug("wd%02x\n", val); | 
|  | qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_WRITE_DATA, &parm); | 
|  | s->dataw = val; | 
|  | break; | 
|  | case PARA_REG_STS: | 
|  | pdebug("ws%02x\n", val); | 
|  | if (val & PARA_STS_TMOUT) | 
|  | s->epp_timeout = 0; | 
|  | break; | 
|  | case PARA_REG_CTR: | 
|  | val |= 0xc0; | 
|  | if (s->control == val) | 
|  | return; | 
|  | pdebug("wc%02x\n", val); | 
|  |  | 
|  | if ((val & PARA_CTR_DIR) != (s->control & PARA_CTR_DIR)) { | 
|  | if (val & PARA_CTR_DIR) { | 
|  | dir = 1; | 
|  | } else { | 
|  | dir = 0; | 
|  | } | 
|  | qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_DATA_DIR, &dir); | 
|  | parm &= ~PARA_CTR_DIR; | 
|  | } | 
|  |  | 
|  | qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_WRITE_CONTROL, &parm); | 
|  | s->control = val; | 
|  | break; | 
|  | case PARA_REG_EPP_ADDR: | 
|  | if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) | 
|  | /* Controls not correct for EPP address cycle, so do nothing */ | 
|  | pdebug("wa%02x s\n", val); | 
|  | else { | 
|  | struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 }; | 
|  | if (qemu_chr_fe_ioctl(&s->chr, | 
|  | CHR_IOCTL_PP_EPP_WRITE_ADDR, &ioarg)) { | 
|  | s->epp_timeout = 1; | 
|  | pdebug("wa%02x t\n", val); | 
|  | } | 
|  | else | 
|  | pdebug("wa%02x\n", val); | 
|  | } | 
|  | break; | 
|  | case PARA_REG_EPP_DATA: | 
|  | if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) | 
|  | /* Controls not correct for EPP data cycle, so do nothing */ | 
|  | pdebug("we%02x s\n", val); | 
|  | else { | 
|  | struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 }; | 
|  | if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg)) { | 
|  | s->epp_timeout = 1; | 
|  | pdebug("we%02x t\n", val); | 
|  | } | 
|  | else | 
|  | pdebug("we%02x\n", val); | 
|  | } | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void | 
|  | parallel_ioport_eppdata_write_hw2(void *opaque, uint32_t addr, uint32_t val) | 
|  | { | 
|  | ParallelState *s = opaque; | 
|  | uint16_t eppdata = cpu_to_le16(val); | 
|  | int err; | 
|  | struct ParallelIOArg ioarg = { | 
|  | .buffer = &eppdata, .count = sizeof(eppdata) | 
|  | }; | 
|  |  | 
|  | trace_parallel_ioport_write("EPP", addr, val); | 
|  | if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) { | 
|  | /* Controls not correct for EPP data cycle, so do nothing */ | 
|  | pdebug("we%04x s\n", val); | 
|  | return; | 
|  | } | 
|  | err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg); | 
|  | if (err) { | 
|  | s->epp_timeout = 1; | 
|  | pdebug("we%04x t\n", val); | 
|  | } | 
|  | else | 
|  | pdebug("we%04x\n", val); | 
|  | } | 
|  |  | 
|  | static void | 
|  | parallel_ioport_eppdata_write_hw4(void *opaque, uint32_t addr, uint32_t val) | 
|  | { | 
|  | ParallelState *s = opaque; | 
|  | uint32_t eppdata = cpu_to_le32(val); | 
|  | int err; | 
|  | struct ParallelIOArg ioarg = { | 
|  | .buffer = &eppdata, .count = sizeof(eppdata) | 
|  | }; | 
|  |  | 
|  | trace_parallel_ioport_write("EPP", addr, val); | 
|  | if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) { | 
|  | /* Controls not correct for EPP data cycle, so do nothing */ | 
|  | pdebug("we%08x s\n", val); | 
|  | return; | 
|  | } | 
|  | err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg); | 
|  | if (err) { | 
|  | s->epp_timeout = 1; | 
|  | pdebug("we%08x t\n", val); | 
|  | } | 
|  | else | 
|  | pdebug("we%08x\n", val); | 
|  | } | 
|  |  | 
|  | static uint32_t parallel_ioport_read_sw(void *opaque, uint32_t addr) | 
|  | { | 
|  | ParallelState *s = opaque; | 
|  | uint32_t ret = 0xff; | 
|  |  | 
|  | addr &= 7; | 
|  | switch(addr) { | 
|  | case PARA_REG_DATA: | 
|  | if (s->control & PARA_CTR_DIR) | 
|  | ret = s->datar; | 
|  | else | 
|  | ret = s->dataw; | 
|  | break; | 
|  | case PARA_REG_STS: | 
|  | ret = s->status; | 
|  | s->irq_pending = 0; | 
|  | if ((s->status & PARA_STS_BUSY) == 0 && (s->control & PARA_CTR_STROBE) == 0) { | 
|  | /* XXX Fixme: wait 5 microseconds */ | 
|  | if (s->status & PARA_STS_ACK) | 
|  | s->status &= ~PARA_STS_ACK; | 
|  | else { | 
|  | /* XXX Fixme: wait 5 microseconds */ | 
|  | s->status |= PARA_STS_ACK; | 
|  | s->status |= PARA_STS_BUSY; | 
|  | } | 
|  | } | 
|  | parallel_update_irq(s); | 
|  | break; | 
|  | case PARA_REG_CTR: | 
|  | ret = s->control; | 
|  | break; | 
|  | } | 
|  | trace_parallel_ioport_read("SW", addr, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static uint32_t parallel_ioport_read_hw(void *opaque, uint32_t addr) | 
|  | { | 
|  | ParallelState *s = opaque; | 
|  | uint8_t ret = 0xff; | 
|  | addr &= 7; | 
|  | switch(addr) { | 
|  | case PARA_REG_DATA: | 
|  | qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_DATA, &ret); | 
|  | if (s->last_read_offset != addr || s->datar != ret) | 
|  | pdebug("rd%02x\n", ret); | 
|  | s->datar = ret; | 
|  | break; | 
|  | case PARA_REG_STS: | 
|  | qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_STATUS, &ret); | 
|  | ret &= ~PARA_STS_TMOUT; | 
|  | if (s->epp_timeout) | 
|  | ret |= PARA_STS_TMOUT; | 
|  | if (s->last_read_offset != addr || s->status != ret) | 
|  | pdebug("rs%02x\n", ret); | 
|  | s->status = ret; | 
|  | break; | 
|  | case PARA_REG_CTR: | 
|  | /* s->control has some bits fixed to 1. It is zero only when | 
|  | it has not been yet written to.  */ | 
|  | if (s->control == 0) { | 
|  | qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_CONTROL, &ret); | 
|  | if (s->last_read_offset != addr) | 
|  | pdebug("rc%02x\n", ret); | 
|  | s->control = ret; | 
|  | } | 
|  | else { | 
|  | ret = s->control; | 
|  | if (s->last_read_offset != addr) | 
|  | pdebug("rc%02x\n", ret); | 
|  | } | 
|  | break; | 
|  | case PARA_REG_EPP_ADDR: | 
|  | if ((s->control & (PARA_CTR_DIR | PARA_CTR_SIGNAL)) != | 
|  | (PARA_CTR_DIR | PARA_CTR_INIT)) | 
|  | /* Controls not correct for EPP addr cycle, so do nothing */ | 
|  | pdebug("ra%02x s\n", ret); | 
|  | else { | 
|  | struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 }; | 
|  | if (qemu_chr_fe_ioctl(&s->chr, | 
|  | CHR_IOCTL_PP_EPP_READ_ADDR, &ioarg)) { | 
|  | s->epp_timeout = 1; | 
|  | pdebug("ra%02x t\n", ret); | 
|  | } | 
|  | else | 
|  | pdebug("ra%02x\n", ret); | 
|  | } | 
|  | break; | 
|  | case PARA_REG_EPP_DATA: | 
|  | if ((s->control & (PARA_CTR_DIR | PARA_CTR_SIGNAL)) != | 
|  | (PARA_CTR_DIR | PARA_CTR_INIT)) | 
|  | /* Controls not correct for EPP data cycle, so do nothing */ | 
|  | pdebug("re%02x s\n", ret); | 
|  | else { | 
|  | struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 }; | 
|  | if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg)) { | 
|  | s->epp_timeout = 1; | 
|  | pdebug("re%02x t\n", ret); | 
|  | } | 
|  | else | 
|  | pdebug("re%02x\n", ret); | 
|  | } | 
|  | break; | 
|  | } | 
|  | trace_parallel_ioport_read("HW", addr, ret); | 
|  | s->last_read_offset = addr; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static uint32_t | 
|  | parallel_ioport_eppdata_read_hw2(void *opaque, uint32_t addr) | 
|  | { | 
|  | ParallelState *s = opaque; | 
|  | uint32_t ret; | 
|  | uint16_t eppdata = ~0; | 
|  | int err; | 
|  | struct ParallelIOArg ioarg = { | 
|  | .buffer = &eppdata, .count = sizeof(eppdata) | 
|  | }; | 
|  | if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) { | 
|  | /* Controls not correct for EPP data cycle, so do nothing */ | 
|  | pdebug("re%04x s\n", eppdata); | 
|  | return eppdata; | 
|  | } | 
|  | err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg); | 
|  | ret = le16_to_cpu(eppdata); | 
|  |  | 
|  | if (err) { | 
|  | s->epp_timeout = 1; | 
|  | pdebug("re%04x t\n", ret); | 
|  | } | 
|  | else | 
|  | pdebug("re%04x\n", ret); | 
|  | trace_parallel_ioport_read("EPP", addr, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static uint32_t | 
|  | parallel_ioport_eppdata_read_hw4(void *opaque, uint32_t addr) | 
|  | { | 
|  | ParallelState *s = opaque; | 
|  | uint32_t ret; | 
|  | uint32_t eppdata = ~0U; | 
|  | int err; | 
|  | struct ParallelIOArg ioarg = { | 
|  | .buffer = &eppdata, .count = sizeof(eppdata) | 
|  | }; | 
|  | if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) { | 
|  | /* Controls not correct for EPP data cycle, so do nothing */ | 
|  | pdebug("re%08x s\n", eppdata); | 
|  | return eppdata; | 
|  | } | 
|  | err = qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg); | 
|  | ret = le32_to_cpu(eppdata); | 
|  |  | 
|  | if (err) { | 
|  | s->epp_timeout = 1; | 
|  | pdebug("re%08x t\n", ret); | 
|  | } | 
|  | else | 
|  | pdebug("re%08x\n", ret); | 
|  | trace_parallel_ioport_read("EPP", addr, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void parallel_ioport_ecp_write(void *opaque, uint32_t addr, uint32_t val) | 
|  | { | 
|  | trace_parallel_ioport_write("ECP", addr & 7, val); | 
|  | pdebug("wecp%d=%02x\n", addr & 7, val); | 
|  | } | 
|  |  | 
|  | static uint32_t parallel_ioport_ecp_read(void *opaque, uint32_t addr) | 
|  | { | 
|  | uint8_t ret = 0xff; | 
|  |  | 
|  | trace_parallel_ioport_read("ECP", addr & 7, ret); | 
|  | pdebug("recp%d:%02x\n", addr & 7, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void parallel_reset(void *opaque) | 
|  | { | 
|  | ParallelState *s = opaque; | 
|  |  | 
|  | s->datar = ~0; | 
|  | s->dataw = ~0; | 
|  | s->status = PARA_STS_BUSY; | 
|  | s->status |= PARA_STS_ACK; | 
|  | s->status |= PARA_STS_ONLINE; | 
|  | s->status |= PARA_STS_ERROR; | 
|  | s->status |= PARA_STS_TMOUT; | 
|  | s->control = PARA_CTR_SELECT; | 
|  | s->control |= PARA_CTR_INIT; | 
|  | s->control |= 0xc0; | 
|  | s->irq_pending = 0; | 
|  | s->hw_driver = 0; | 
|  | s->epp_timeout = 0; | 
|  | s->last_read_offset = ~0U; | 
|  | } | 
|  |  | 
|  | static const int isa_parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc }; | 
|  |  | 
|  | static const MemoryRegionPortio isa_parallel_portio_hw_list[] = { | 
|  | { 0, 8, 1, | 
|  | .read = parallel_ioport_read_hw, | 
|  | .write = parallel_ioport_write_hw }, | 
|  | { 4, 1, 2, | 
|  | .read = parallel_ioport_eppdata_read_hw2, | 
|  | .write = parallel_ioport_eppdata_write_hw2 }, | 
|  | { 4, 1, 4, | 
|  | .read = parallel_ioport_eppdata_read_hw4, | 
|  | .write = parallel_ioport_eppdata_write_hw4 }, | 
|  | { 0x400, 8, 1, | 
|  | .read = parallel_ioport_ecp_read, | 
|  | .write = parallel_ioport_ecp_write }, | 
|  | PORTIO_END_OF_LIST(), | 
|  | }; | 
|  |  | 
|  | static const MemoryRegionPortio isa_parallel_portio_sw_list[] = { | 
|  | { 0, 8, 1, | 
|  | .read = parallel_ioport_read_sw, | 
|  | .write = parallel_ioport_write_sw }, | 
|  | PORTIO_END_OF_LIST(), | 
|  | }; | 
|  |  | 
|  |  | 
|  | static const VMStateDescription vmstate_parallel_isa = { | 
|  | .name = "parallel_isa", | 
|  | .version_id = 1, | 
|  | .minimum_version_id = 1, | 
|  | .fields      = (VMStateField[]) { | 
|  | VMSTATE_UINT8(state.dataw, ISAParallelState), | 
|  | VMSTATE_UINT8(state.datar, ISAParallelState), | 
|  | VMSTATE_UINT8(state.status, ISAParallelState), | 
|  | VMSTATE_UINT8(state.control, ISAParallelState), | 
|  | VMSTATE_INT32(state.irq_pending, ISAParallelState), | 
|  | VMSTATE_INT32(state.epp_timeout, ISAParallelState), | 
|  | VMSTATE_END_OF_LIST() | 
|  | } | 
|  | }; | 
|  |  | 
|  | static int parallel_can_receive(void *opaque) | 
|  | { | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static void parallel_isa_realizefn(DeviceState *dev, Error **errp) | 
|  | { | 
|  | static int index; | 
|  | ISADevice *isadev = ISA_DEVICE(dev); | 
|  | ISAParallelState *isa = ISA_PARALLEL(dev); | 
|  | ParallelState *s = &isa->state; | 
|  | int base; | 
|  | uint8_t dummy; | 
|  |  | 
|  | if (!qemu_chr_fe_backend_connected(&s->chr)) { | 
|  | error_setg(errp, "Can't create parallel device, empty char device"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (isa->index == -1) { | 
|  | isa->index = index; | 
|  | } | 
|  | if (isa->index >= MAX_PARALLEL_PORTS) { | 
|  | error_setg(errp, "Max. supported number of parallel ports is %d.", | 
|  | MAX_PARALLEL_PORTS); | 
|  | return; | 
|  | } | 
|  | if (isa->iobase == -1) { | 
|  | isa->iobase = isa_parallel_io[isa->index]; | 
|  | } | 
|  | index++; | 
|  |  | 
|  | base = isa->iobase; | 
|  | s->irq = isa_get_irq(isadev, isa->isairq); | 
|  | qemu_register_reset(parallel_reset, s); | 
|  |  | 
|  | qemu_chr_fe_set_handlers(&s->chr, parallel_can_receive, NULL, | 
|  | NULL, NULL, s, NULL, true); | 
|  | if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_PP_READ_STATUS, &dummy) == 0) { | 
|  | s->hw_driver = 1; | 
|  | s->status = dummy; | 
|  | } | 
|  |  | 
|  | isa_register_portio_list(isadev, &s->portio_list, base, | 
|  | (s->hw_driver | 
|  | ? &isa_parallel_portio_hw_list[0] | 
|  | : &isa_parallel_portio_sw_list[0]), | 
|  | s, "parallel"); | 
|  | } | 
|  |  | 
|  | static void parallel_isa_build_aml(AcpiDevAmlIf *adev, Aml *scope) | 
|  | { | 
|  | ISAParallelState *isa = ISA_PARALLEL(adev); | 
|  | Aml *dev; | 
|  | Aml *crs; | 
|  |  | 
|  | crs = aml_resource_template(); | 
|  | aml_append(crs, aml_io(AML_DECODE16, isa->iobase, isa->iobase, 0x08, 0x08)); | 
|  | aml_append(crs, aml_irq_no_flags(isa->isairq)); | 
|  |  | 
|  | dev = aml_device("LPT%d", isa->index + 1); | 
|  | aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0400"))); | 
|  | aml_append(dev, aml_name_decl("_UID", aml_int(isa->index + 1))); | 
|  | aml_append(dev, aml_name_decl("_STA", aml_int(0xf))); | 
|  | aml_append(dev, aml_name_decl("_CRS", crs)); | 
|  |  | 
|  | aml_append(scope, dev); | 
|  | } | 
|  |  | 
|  | /* Memory mapped interface */ | 
|  | static uint64_t parallel_mm_readfn(void *opaque, hwaddr addr, unsigned size) | 
|  | { | 
|  | ParallelState *s = opaque; | 
|  |  | 
|  | return parallel_ioport_read_sw(s, addr >> s->it_shift) & | 
|  | MAKE_64BIT_MASK(0, size * 8); | 
|  | } | 
|  |  | 
|  | static void parallel_mm_writefn(void *opaque, hwaddr addr, | 
|  | uint64_t value, unsigned size) | 
|  | { | 
|  | ParallelState *s = opaque; | 
|  |  | 
|  | parallel_ioport_write_sw(s, addr >> s->it_shift, | 
|  | value & MAKE_64BIT_MASK(0, size * 8)); | 
|  | } | 
|  |  | 
|  | static const MemoryRegionOps parallel_mm_ops = { | 
|  | .read = parallel_mm_readfn, | 
|  | .write = parallel_mm_writefn, | 
|  | .valid.min_access_size = 1, | 
|  | .valid.max_access_size = 4, | 
|  | .endianness = DEVICE_NATIVE_ENDIAN, | 
|  | }; | 
|  |  | 
|  | /* If fd is zero, it means that the parallel device uses the console */ | 
|  | bool parallel_mm_init(MemoryRegion *address_space, | 
|  | hwaddr base, int it_shift, qemu_irq irq, | 
|  | Chardev *chr) | 
|  | { | 
|  | ParallelState *s; | 
|  |  | 
|  | s = g_new0(ParallelState, 1); | 
|  | s->irq = irq; | 
|  | qemu_chr_fe_init(&s->chr, chr, &error_abort); | 
|  | s->it_shift = it_shift; | 
|  | qemu_register_reset(parallel_reset, s); | 
|  |  | 
|  | memory_region_init_io(&s->iomem, NULL, ¶llel_mm_ops, s, | 
|  | "parallel", 8 << it_shift); | 
|  | memory_region_add_subregion(address_space, base, &s->iomem); | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static Property parallel_isa_properties[] = { | 
|  | DEFINE_PROP_UINT32("index", ISAParallelState, index,   -1), | 
|  | DEFINE_PROP_UINT32("iobase", ISAParallelState, iobase,  -1), | 
|  | DEFINE_PROP_UINT32("irq",   ISAParallelState, isairq,  7), | 
|  | DEFINE_PROP_CHR("chardev",  ISAParallelState, state.chr), | 
|  | DEFINE_PROP_END_OF_LIST(), | 
|  | }; | 
|  |  | 
|  | static void parallel_isa_class_initfn(ObjectClass *klass, void *data) | 
|  | { | 
|  | DeviceClass *dc = DEVICE_CLASS(klass); | 
|  | AcpiDevAmlIfClass *adevc = ACPI_DEV_AML_IF_CLASS(klass); | 
|  |  | 
|  | dc->realize = parallel_isa_realizefn; | 
|  | dc->vmsd = &vmstate_parallel_isa; | 
|  | adevc->build_dev_aml = parallel_isa_build_aml; | 
|  | device_class_set_props(dc, parallel_isa_properties); | 
|  | set_bit(DEVICE_CATEGORY_INPUT, dc->categories); | 
|  | } | 
|  |  | 
|  | static const TypeInfo parallel_isa_info = { | 
|  | .name          = TYPE_ISA_PARALLEL, | 
|  | .parent        = TYPE_ISA_DEVICE, | 
|  | .instance_size = sizeof(ISAParallelState), | 
|  | .class_init    = parallel_isa_class_initfn, | 
|  | .interfaces = (InterfaceInfo[]) { | 
|  | { TYPE_ACPI_DEV_AML_IF }, | 
|  | { }, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static void parallel_register_types(void) | 
|  | { | 
|  | type_register_static(¶llel_isa_info); | 
|  | } | 
|  |  | 
|  | type_init(parallel_register_types) |