| /* |
| * pcie_aer.c |
| * |
| * Copyright (c) 2010 Isaku Yamahata <yamahata at valinux co jp> |
| * VA Linux Systems Japan K.K. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "migration/vmstate.h" |
| #include "hw/pci/pci_bridge.h" |
| #include "hw/pci/pcie.h" |
| #include "hw/pci/msix.h" |
| #include "hw/pci/msi.h" |
| #include "hw/pci/pci_bus.h" |
| #include "hw/pci/pcie_regs.h" |
| #include "pci-internal.h" |
| |
| //#define DEBUG_PCIE |
| #ifdef DEBUG_PCIE |
| # define PCIE_DPRINTF(fmt, ...) \ |
| fprintf(stderr, "%s:%d " fmt, __func__, __LINE__, ## __VA_ARGS__) |
| #else |
| # define PCIE_DPRINTF(fmt, ...) do {} while (0) |
| #endif |
| #define PCIE_DEV_PRINTF(dev, fmt, ...) \ |
| PCIE_DPRINTF("%s:%x "fmt, (dev)->name, (dev)->devfn, ## __VA_ARGS__) |
| |
| #define PCI_ERR_SRC_COR_OFFS 0 |
| #define PCI_ERR_SRC_UNCOR_OFFS 2 |
| |
| /* From 6.2.7 Error Listing and Rules. Table 6-2, 6-3 and 6-4 */ |
| static uint32_t pcie_aer_uncor_default_severity(uint32_t status) |
| { |
| switch (status) { |
| case PCI_ERR_UNC_INTN: |
| case PCI_ERR_UNC_DLP: |
| case PCI_ERR_UNC_SDN: |
| case PCI_ERR_UNC_RX_OVER: |
| case PCI_ERR_UNC_FCP: |
| case PCI_ERR_UNC_MALF_TLP: |
| return PCI_ERR_ROOT_CMD_FATAL_EN; |
| case PCI_ERR_UNC_POISON_TLP: |
| case PCI_ERR_UNC_ECRC: |
| case PCI_ERR_UNC_UNSUP: |
| case PCI_ERR_UNC_COMP_TIME: |
| case PCI_ERR_UNC_COMP_ABORT: |
| case PCI_ERR_UNC_UNX_COMP: |
| case PCI_ERR_UNC_ACSV: |
| case PCI_ERR_UNC_MCBTLP: |
| case PCI_ERR_UNC_ATOP_EBLOCKED: |
| case PCI_ERR_UNC_TLP_PRF_BLOCKED: |
| return PCI_ERR_ROOT_CMD_NONFATAL_EN; |
| default: |
| abort(); |
| break; |
| } |
| return PCI_ERR_ROOT_CMD_FATAL_EN; |
| } |
| |
| static int aer_log_add_err(PCIEAERLog *aer_log, const PCIEAERErr *err) |
| { |
| if (aer_log->log_num == aer_log->log_max) { |
| return -1; |
| } |
| memcpy(&aer_log->log[aer_log->log_num], err, sizeof *err); |
| aer_log->log_num++; |
| return 0; |
| } |
| |
| static void aer_log_del_err(PCIEAERLog *aer_log, PCIEAERErr *err) |
| { |
| assert(aer_log->log_num); |
| *err = aer_log->log[0]; |
| aer_log->log_num--; |
| memmove(&aer_log->log[0], &aer_log->log[1], |
| aer_log->log_num * sizeof *err); |
| } |
| |
| static void aer_log_clear_all_err(PCIEAERLog *aer_log) |
| { |
| aer_log->log_num = 0; |
| } |
| |
| int pcie_aer_init(PCIDevice *dev, uint8_t cap_ver, uint16_t offset, |
| uint16_t size, Error **errp) |
| { |
| pcie_add_capability(dev, PCI_EXT_CAP_ID_ERR, cap_ver, |
| offset, size); |
| dev->exp.aer_cap = offset; |
| |
| /* clip down the value to avoid unreasonable memory usage */ |
| if (dev->exp.aer_log.log_max > PCIE_AER_LOG_MAX_LIMIT) { |
| error_setg(errp, "Invalid aer_log_max %d. The max number of aer log " |
| "is %d", dev->exp.aer_log.log_max, PCIE_AER_LOG_MAX_LIMIT); |
| return -EINVAL; |
| } |
| dev->exp.aer_log.log = g_malloc0(sizeof dev->exp.aer_log.log[0] * |
| dev->exp.aer_log.log_max); |
| |
| pci_set_long(dev->w1cmask + offset + PCI_ERR_UNCOR_STATUS, |
| PCI_ERR_UNC_SUPPORTED); |
| |
| if (dev->cap_present & QEMU_PCIE_ERR_UNC_MASK) { |
| pci_set_long(dev->config + offset + PCI_ERR_UNCOR_MASK, |
| PCI_ERR_UNC_MASK_DEFAULT); |
| pci_set_long(dev->wmask + offset + PCI_ERR_UNCOR_MASK, |
| PCI_ERR_UNC_SUPPORTED); |
| } |
| |
| pci_set_long(dev->config + offset + PCI_ERR_UNCOR_SEVER, |
| PCI_ERR_UNC_SEVERITY_DEFAULT); |
| pci_set_long(dev->wmask + offset + PCI_ERR_UNCOR_SEVER, |
| PCI_ERR_UNC_SUPPORTED); |
| |
| pci_long_test_and_set_mask(dev->w1cmask + offset + PCI_ERR_COR_STATUS, |
| PCI_ERR_COR_SUPPORTED); |
| |
| pci_set_long(dev->config + offset + PCI_ERR_COR_MASK, |
| PCI_ERR_COR_MASK_DEFAULT); |
| pci_set_long(dev->wmask + offset + PCI_ERR_COR_MASK, |
| PCI_ERR_COR_SUPPORTED); |
| |
| /* capabilities and control. multiple header logging is supported */ |
| if (dev->exp.aer_log.log_max > 0) { |
| pci_set_long(dev->config + offset + PCI_ERR_CAP, |
| PCI_ERR_CAP_ECRC_GENC | PCI_ERR_CAP_ECRC_CHKC | |
| PCI_ERR_CAP_MHRC); |
| pci_set_long(dev->wmask + offset + PCI_ERR_CAP, |
| PCI_ERR_CAP_ECRC_GENE | PCI_ERR_CAP_ECRC_CHKE | |
| PCI_ERR_CAP_MHRE); |
| } else { |
| pci_set_long(dev->config + offset + PCI_ERR_CAP, |
| PCI_ERR_CAP_ECRC_GENC | PCI_ERR_CAP_ECRC_CHKC); |
| pci_set_long(dev->wmask + offset + PCI_ERR_CAP, |
| PCI_ERR_CAP_ECRC_GENE | PCI_ERR_CAP_ECRC_CHKE); |
| } |
| |
| switch (pcie_cap_get_type(dev)) { |
| case PCI_EXP_TYPE_ROOT_PORT: |
| /* this case will be set by pcie_aer_root_init() */ |
| /* fallthrough */ |
| case PCI_EXP_TYPE_DOWNSTREAM: |
| case PCI_EXP_TYPE_UPSTREAM: |
| pci_word_test_and_set_mask(dev->wmask + PCI_BRIDGE_CONTROL, |
| PCI_BRIDGE_CTL_SERR); |
| pci_long_test_and_set_mask(dev->w1cmask + PCI_STATUS, |
| PCI_SEC_STATUS_RCV_SYSTEM_ERROR); |
| break; |
| default: |
| /* nothing */ |
| break; |
| } |
| return 0; |
| } |
| |
| void pcie_aer_exit(PCIDevice *dev) |
| { |
| g_free(dev->exp.aer_log.log); |
| } |
| |
| static void pcie_aer_update_uncor_status(PCIDevice *dev) |
| { |
| uint8_t *aer_cap = dev->config + dev->exp.aer_cap; |
| PCIEAERLog *aer_log = &dev->exp.aer_log; |
| |
| uint16_t i; |
| for (i = 0; i < aer_log->log_num; i++) { |
| pci_long_test_and_set_mask(aer_cap + PCI_ERR_UNCOR_STATUS, |
| dev->exp.aer_log.log[i].status); |
| } |
| } |
| |
| /* |
| * return value: |
| * true: error message needs to be sent up |
| * false: error message is masked |
| * |
| * 6.2.6 Error Message Control |
| * Figure 6-3 |
| * all pci express devices part |
| */ |
| static bool |
| pcie_aer_msg_alldev(PCIDevice *dev, const PCIEAERMsg *msg) |
| { |
| uint16_t devctl = pci_get_word(dev->config + dev->exp.exp_cap + |
| PCI_EXP_DEVCTL); |
| if (!(pcie_aer_msg_is_uncor(msg) && |
| (pci_get_word(dev->config + PCI_COMMAND) & PCI_COMMAND_SERR)) && |
| !((msg->severity == PCI_ERR_ROOT_CMD_NONFATAL_EN) && |
| (devctl & PCI_EXP_DEVCTL_NFERE)) && |
| !((msg->severity == PCI_ERR_ROOT_CMD_COR_EN) && |
| (devctl & PCI_EXP_DEVCTL_CERE)) && |
| !((msg->severity == PCI_ERR_ROOT_CMD_FATAL_EN) && |
| (devctl & PCI_EXP_DEVCTL_FERE))) { |
| return false; |
| } |
| |
| /* Signaled System Error |
| * |
| * 7.5.1.1 Command register |
| * Bit 8 SERR# Enable |
| * |
| * When Set, this bit enables reporting of Non-fatal and Fatal |
| * errors detected by the Function to the Root Complex. Note that |
| * errors are reported if enabled either through this bit or through |
| * the PCI Express specific bits in the Device Control register (see |
| * Section 7.8.4). |
| */ |
| pci_word_test_and_set_mask(dev->config + PCI_STATUS, |
| PCI_STATUS_SIG_SYSTEM_ERROR); |
| |
| if (!(msg->severity & |
| pci_get_word(dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL))) { |
| return false; |
| } |
| |
| /* send up error message */ |
| return true; |
| } |
| |
| /* |
| * return value: |
| * true: error message is sent up |
| * false: error message is masked |
| * |
| * 6.2.6 Error Message Control |
| * Figure 6-3 |
| * virtual pci bridge part |
| */ |
| static bool pcie_aer_msg_vbridge(PCIDevice *dev, const PCIEAERMsg *msg) |
| { |
| uint16_t bridge_control = pci_get_word(dev->config + PCI_BRIDGE_CONTROL); |
| |
| if (pcie_aer_msg_is_uncor(msg)) { |
| /* Received System Error */ |
| pci_word_test_and_set_mask(dev->config + PCI_SEC_STATUS, |
| PCI_SEC_STATUS_RCV_SYSTEM_ERROR); |
| } |
| |
| if (!(bridge_control & PCI_BRIDGE_CTL_SERR)) { |
| return false; |
| } |
| return true; |
| } |
| |
| void pcie_aer_root_set_vector(PCIDevice *dev, unsigned int vector) |
| { |
| uint8_t *aer_cap = dev->config + dev->exp.aer_cap; |
| assert(vector < PCI_ERR_ROOT_IRQ_MAX); |
| pci_long_test_and_clear_mask(aer_cap + PCI_ERR_ROOT_STATUS, |
| PCI_ERR_ROOT_IRQ); |
| pci_long_test_and_set_mask(aer_cap + PCI_ERR_ROOT_STATUS, |
| vector << PCI_ERR_ROOT_IRQ_SHIFT); |
| } |
| |
| static unsigned int pcie_aer_root_get_vector(PCIDevice *dev) |
| { |
| uint8_t *aer_cap = dev->config + dev->exp.aer_cap; |
| uint32_t root_status = pci_get_long(aer_cap + PCI_ERR_ROOT_STATUS); |
| return (root_status & PCI_ERR_ROOT_IRQ) >> PCI_ERR_ROOT_IRQ_SHIFT; |
| } |
| |
| /* Given a status register, get corresponding bits in the command register */ |
| static uint32_t pcie_aer_status_to_cmd(uint32_t status) |
| { |
| uint32_t cmd = 0; |
| if (status & PCI_ERR_ROOT_COR_RCV) { |
| cmd |= PCI_ERR_ROOT_CMD_COR_EN; |
| } |
| if (status & PCI_ERR_ROOT_NONFATAL_RCV) { |
| cmd |= PCI_ERR_ROOT_CMD_NONFATAL_EN; |
| } |
| if (status & PCI_ERR_ROOT_FATAL_RCV) { |
| cmd |= PCI_ERR_ROOT_CMD_FATAL_EN; |
| } |
| return cmd; |
| } |
| |
| static void pcie_aer_root_notify(PCIDevice *dev) |
| { |
| if (msix_enabled(dev)) { |
| msix_notify(dev, pcie_aer_root_get_vector(dev)); |
| } else if (msi_enabled(dev)) { |
| msi_notify(dev, pcie_aer_root_get_vector(dev)); |
| } else if (pci_intx(dev) != -1) { |
| pci_irq_assert(dev); |
| } |
| } |
| |
| /* |
| * 6.2.6 Error Message Control |
| * Figure 6-3 |
| * root port part |
| */ |
| static void pcie_aer_msg_root_port(PCIDevice *dev, const PCIEAERMsg *msg) |
| { |
| uint16_t cmd; |
| uint8_t *aer_cap; |
| uint32_t root_cmd; |
| uint32_t root_status, prev_status; |
| |
| cmd = pci_get_word(dev->config + PCI_COMMAND); |
| aer_cap = dev->config + dev->exp.aer_cap; |
| root_cmd = pci_get_long(aer_cap + PCI_ERR_ROOT_COMMAND); |
| prev_status = root_status = pci_get_long(aer_cap + PCI_ERR_ROOT_STATUS); |
| |
| if (cmd & PCI_COMMAND_SERR) { |
| /* System Error. |
| * |
| * The way to report System Error is platform specific and |
| * it isn't implemented in qemu right now. |
| * So just discard the error for now. |
| * OS which cares of aer would receive errors via |
| * native aer mechanisms, so this wouldn't matter. |
| */ |
| } |
| |
| /* Error Message Received: Root Error Status register */ |
| switch (msg->severity) { |
| case PCI_ERR_ROOT_CMD_COR_EN: |
| if (root_status & PCI_ERR_ROOT_COR_RCV) { |
| root_status |= PCI_ERR_ROOT_MULTI_COR_RCV; |
| } else { |
| pci_set_word(aer_cap + PCI_ERR_ROOT_ERR_SRC + PCI_ERR_SRC_COR_OFFS, |
| msg->source_id); |
| } |
| root_status |= PCI_ERR_ROOT_COR_RCV; |
| break; |
| case PCI_ERR_ROOT_CMD_NONFATAL_EN: |
| root_status |= PCI_ERR_ROOT_NONFATAL_RCV; |
| break; |
| case PCI_ERR_ROOT_CMD_FATAL_EN: |
| if (!(root_status & PCI_ERR_ROOT_UNCOR_RCV)) { |
| root_status |= PCI_ERR_ROOT_FIRST_FATAL; |
| } |
| root_status |= PCI_ERR_ROOT_FATAL_RCV; |
| break; |
| default: |
| abort(); |
| break; |
| } |
| if (pcie_aer_msg_is_uncor(msg)) { |
| if (root_status & PCI_ERR_ROOT_UNCOR_RCV) { |
| root_status |= PCI_ERR_ROOT_MULTI_UNCOR_RCV; |
| } else { |
| pci_set_word(aer_cap + PCI_ERR_ROOT_ERR_SRC + |
| PCI_ERR_SRC_UNCOR_OFFS, msg->source_id); |
| } |
| root_status |= PCI_ERR_ROOT_UNCOR_RCV; |
| } |
| pci_set_long(aer_cap + PCI_ERR_ROOT_STATUS, root_status); |
| |
| /* 6.2.4.1.2 Interrupt Generation */ |
| /* All the above did was set some bits in the status register. |
| * Specifically these that match message severity. |
| * The below code relies on this fact. */ |
| if (!(root_cmd & msg->severity) || |
| (pcie_aer_status_to_cmd(prev_status) & root_cmd)) { |
| /* Condition is not being set or was already true so nothing to do. */ |
| return; |
| } |
| |
| pcie_aer_root_notify(dev); |
| } |
| |
| /* |
| * 6.2.6 Error Message Control Figure 6-3 |
| * |
| * Walk up the bus tree from the device, propagate the error message. |
| */ |
| static void pcie_aer_msg(PCIDevice *dev, const PCIEAERMsg *msg) |
| { |
| uint8_t type; |
| |
| while (dev) { |
| if (!pci_is_express(dev)) { |
| /* just ignore it */ |
| /* TODO: Shouldn't we set PCI_STATUS_SIG_SYSTEM_ERROR? |
| * Consider e.g. a PCI bridge above a PCI Express device. */ |
| return; |
| } |
| |
| type = pcie_cap_get_type(dev); |
| if ((type == PCI_EXP_TYPE_ROOT_PORT || |
| type == PCI_EXP_TYPE_UPSTREAM || |
| type == PCI_EXP_TYPE_DOWNSTREAM) && |
| !pcie_aer_msg_vbridge(dev, msg)) { |
| return; |
| } |
| if (!pcie_aer_msg_alldev(dev, msg)) { |
| return; |
| } |
| if (type == PCI_EXP_TYPE_ROOT_PORT) { |
| pcie_aer_msg_root_port(dev, msg); |
| /* Root port can notify system itself, |
| or send the error message to root complex event collector. */ |
| /* |
| * if root port is associated with an event collector, |
| * return the root complex event collector here. |
| * For now root complex event collector isn't supported. |
| */ |
| return; |
| } |
| dev = pci_bridge_get_device(pci_get_bus(dev)); |
| } |
| } |
| |
| static void pcie_aer_update_log(PCIDevice *dev, const PCIEAERErr *err) |
| { |
| uint8_t *aer_cap = dev->config + dev->exp.aer_cap; |
| uint8_t first_bit = ctz32(err->status); |
| uint32_t errcap = pci_get_long(aer_cap + PCI_ERR_CAP); |
| int i; |
| |
| assert(err->status); |
| assert(!(err->status & (err->status - 1))); |
| |
| errcap &= ~(PCI_ERR_CAP_FEP_MASK | PCI_ERR_CAP_TLP); |
| errcap |= PCI_ERR_CAP_FEP(first_bit); |
| |
| if (err->flags & PCIE_AER_ERR_HEADER_VALID) { |
| for (i = 0; i < ARRAY_SIZE(err->header); ++i) { |
| /* 7.10.8 Header Log Register */ |
| uint8_t *header_log = |
| aer_cap + PCI_ERR_HEADER_LOG + i * sizeof err->header[0]; |
| stl_be_p(header_log, err->header[i]); |
| } |
| } else { |
| assert(!(err->flags & PCIE_AER_ERR_TLP_PREFIX_PRESENT)); |
| memset(aer_cap + PCI_ERR_HEADER_LOG, 0, PCI_ERR_HEADER_LOG_SIZE); |
| } |
| |
| if ((err->flags & PCIE_AER_ERR_TLP_PREFIX_PRESENT) && |
| (pci_get_long(dev->config + dev->exp.exp_cap + PCI_EXP_DEVCAP2) & |
| PCI_EXP_DEVCAP2_EETLPP)) { |
| for (i = 0; i < ARRAY_SIZE(err->prefix); ++i) { |
| /* 7.10.12 tlp prefix log register */ |
| uint8_t *prefix_log = |
| aer_cap + PCI_ERR_TLP_PREFIX_LOG + i * sizeof err->prefix[0]; |
| stl_be_p(prefix_log, err->prefix[i]); |
| } |
| errcap |= PCI_ERR_CAP_TLP; |
| } else { |
| memset(aer_cap + PCI_ERR_TLP_PREFIX_LOG, 0, |
| PCI_ERR_TLP_PREFIX_LOG_SIZE); |
| } |
| pci_set_long(aer_cap + PCI_ERR_CAP, errcap); |
| } |
| |
| static void pcie_aer_clear_log(PCIDevice *dev) |
| { |
| uint8_t *aer_cap = dev->config + dev->exp.aer_cap; |
| |
| pci_long_test_and_clear_mask(aer_cap + PCI_ERR_CAP, |
| PCI_ERR_CAP_FEP_MASK | PCI_ERR_CAP_TLP); |
| |
| memset(aer_cap + PCI_ERR_HEADER_LOG, 0, PCI_ERR_HEADER_LOG_SIZE); |
| memset(aer_cap + PCI_ERR_TLP_PREFIX_LOG, 0, PCI_ERR_TLP_PREFIX_LOG_SIZE); |
| } |
| |
| static void pcie_aer_clear_error(PCIDevice *dev) |
| { |
| uint8_t *aer_cap = dev->config + dev->exp.aer_cap; |
| uint32_t errcap = pci_get_long(aer_cap + PCI_ERR_CAP); |
| PCIEAERLog *aer_log = &dev->exp.aer_log; |
| PCIEAERErr err; |
| |
| if (!(errcap & PCI_ERR_CAP_MHRE) || !aer_log->log_num) { |
| pcie_aer_clear_log(dev); |
| return; |
| } |
| |
| /* |
| * If more errors are queued, set corresponding bits in uncorrectable |
| * error status. |
| * We emulate uncorrectable error status register as W1CS. |
| * So set bit in uncorrectable error status here again for multiple |
| * error recording support. |
| * |
| * 6.2.4.2 Multiple Error Handling(Advanced Error Reporting Capability) |
| */ |
| pcie_aer_update_uncor_status(dev); |
| |
| aer_log_del_err(aer_log, &err); |
| pcie_aer_update_log(dev, &err); |
| } |
| |
| static int pcie_aer_record_error(PCIDevice *dev, |
| const PCIEAERErr *err) |
| { |
| uint8_t *aer_cap = dev->config + dev->exp.aer_cap; |
| uint32_t errcap = pci_get_long(aer_cap + PCI_ERR_CAP); |
| int fep = PCI_ERR_CAP_FEP(errcap); |
| |
| assert(err->status); |
| assert(!(err->status & (err->status - 1))); |
| |
| if (errcap & PCI_ERR_CAP_MHRE && |
| (pci_get_long(aer_cap + PCI_ERR_UNCOR_STATUS) & (1U << fep))) { |
| /* Not first error. queue error */ |
| if (aer_log_add_err(&dev->exp.aer_log, err) < 0) { |
| /* overflow */ |
| return -1; |
| } |
| return 0; |
| } |
| |
| pcie_aer_update_log(dev, err); |
| return 0; |
| } |
| |
| typedef struct PCIEAERInject { |
| PCIDevice *dev; |
| uint8_t *aer_cap; |
| const PCIEAERErr *err; |
| uint16_t devctl; |
| uint16_t devsta; |
| uint32_t error_status; |
| bool unsupported_request; |
| bool log_overflow; |
| PCIEAERMsg msg; |
| } PCIEAERInject; |
| |
| static bool pcie_aer_inject_cor_error(PCIEAERInject *inj, |
| uint32_t uncor_status, |
| bool is_advisory_nonfatal) |
| { |
| PCIDevice *dev = inj->dev; |
| |
| inj->devsta |= PCI_EXP_DEVSTA_CED; |
| if (inj->unsupported_request) { |
| inj->devsta |= PCI_EXP_DEVSTA_URD; |
| } |
| pci_set_word(dev->config + dev->exp.exp_cap + PCI_EXP_DEVSTA, inj->devsta); |
| |
| if (inj->aer_cap) { |
| uint32_t mask; |
| pci_long_test_and_set_mask(inj->aer_cap + PCI_ERR_COR_STATUS, |
| inj->error_status); |
| mask = pci_get_long(inj->aer_cap + PCI_ERR_COR_MASK); |
| if (mask & inj->error_status) { |
| return false; |
| } |
| if (is_advisory_nonfatal) { |
| uint32_t uncor_mask = |
| pci_get_long(inj->aer_cap + PCI_ERR_UNCOR_MASK); |
| if (!(uncor_mask & uncor_status)) { |
| inj->log_overflow = !!pcie_aer_record_error(dev, inj->err); |
| } |
| pci_long_test_and_set_mask(inj->aer_cap + PCI_ERR_UNCOR_STATUS, |
| uncor_status); |
| } |
| } |
| |
| if (inj->unsupported_request && !(inj->devctl & PCI_EXP_DEVCTL_URRE)) { |
| return false; |
| } |
| if (!(inj->devctl & PCI_EXP_DEVCTL_CERE)) { |
| return false; |
| } |
| |
| inj->msg.severity = PCI_ERR_ROOT_CMD_COR_EN; |
| return true; |
| } |
| |
| static bool pcie_aer_inject_uncor_error(PCIEAERInject *inj, bool is_fatal) |
| { |
| PCIDevice *dev = inj->dev; |
| uint16_t cmd; |
| |
| if (is_fatal) { |
| inj->devsta |= PCI_EXP_DEVSTA_FED; |
| } else { |
| inj->devsta |= PCI_EXP_DEVSTA_NFED; |
| } |
| if (inj->unsupported_request) { |
| inj->devsta |= PCI_EXP_DEVSTA_URD; |
| } |
| pci_set_long(dev->config + dev->exp.exp_cap + PCI_EXP_DEVSTA, inj->devsta); |
| |
| if (inj->aer_cap) { |
| uint32_t mask = pci_get_long(inj->aer_cap + PCI_ERR_UNCOR_MASK); |
| if (mask & inj->error_status) { |
| pci_long_test_and_set_mask(inj->aer_cap + PCI_ERR_UNCOR_STATUS, |
| inj->error_status); |
| return false; |
| } |
| |
| inj->log_overflow = !!pcie_aer_record_error(dev, inj->err); |
| pci_long_test_and_set_mask(inj->aer_cap + PCI_ERR_UNCOR_STATUS, |
| inj->error_status); |
| } |
| |
| cmd = pci_get_word(dev->config + PCI_COMMAND); |
| if (inj->unsupported_request && |
| !(inj->devctl & PCI_EXP_DEVCTL_URRE) && !(cmd & PCI_COMMAND_SERR)) { |
| return false; |
| } |
| if (is_fatal) { |
| if (!((cmd & PCI_COMMAND_SERR) || |
| (inj->devctl & PCI_EXP_DEVCTL_FERE))) { |
| return false; |
| } |
| inj->msg.severity = PCI_ERR_ROOT_CMD_FATAL_EN; |
| } else { |
| if (!((cmd & PCI_COMMAND_SERR) || |
| (inj->devctl & PCI_EXP_DEVCTL_NFERE))) { |
| return false; |
| } |
| inj->msg.severity = PCI_ERR_ROOT_CMD_NONFATAL_EN; |
| } |
| return true; |
| } |
| |
| /* |
| * non-Function specific error must be recorded in all functions. |
| * It is the responsibility of the caller of this function. |
| * It is also caller's responsibility to determine which function should |
| * report the error. |
| * |
| * 6.2.4 Error Logging |
| * 6.2.5 Sequence of Device Error Signaling and Logging Operations |
| * Figure 6-2: Flowchart Showing Sequence of Device Error Signaling and Logging |
| * Operations |
| */ |
| int pcie_aer_inject_error(PCIDevice *dev, const PCIEAERErr *err) |
| { |
| uint8_t *aer_cap = NULL; |
| uint16_t devctl = 0; |
| uint16_t devsta = 0; |
| uint32_t error_status = err->status; |
| PCIEAERInject inj; |
| |
| if (!pci_is_express(dev)) { |
| return -ENOSYS; |
| } |
| |
| if (err->flags & PCIE_AER_ERR_IS_CORRECTABLE) { |
| error_status &= PCI_ERR_COR_SUPPORTED; |
| } else { |
| error_status &= PCI_ERR_UNC_SUPPORTED; |
| } |
| |
| /* invalid status bit. one and only one bit must be set */ |
| if (!error_status || (error_status & (error_status - 1))) { |
| return -EINVAL; |
| } |
| |
| if (dev->exp.aer_cap) { |
| uint8_t *exp_cap = dev->config + dev->exp.exp_cap; |
| aer_cap = dev->config + dev->exp.aer_cap; |
| devctl = pci_get_long(exp_cap + PCI_EXP_DEVCTL); |
| devsta = pci_get_long(exp_cap + PCI_EXP_DEVSTA); |
| } |
| |
| inj.dev = dev; |
| inj.aer_cap = aer_cap; |
| inj.err = err; |
| inj.devctl = devctl; |
| inj.devsta = devsta; |
| inj.error_status = error_status; |
| inj.unsupported_request = !(err->flags & PCIE_AER_ERR_IS_CORRECTABLE) && |
| err->status == PCI_ERR_UNC_UNSUP; |
| inj.log_overflow = false; |
| |
| if (err->flags & PCIE_AER_ERR_IS_CORRECTABLE) { |
| if (!pcie_aer_inject_cor_error(&inj, 0, false)) { |
| return 0; |
| } |
| } else { |
| bool is_fatal = |
| pcie_aer_uncor_default_severity(error_status) == |
| PCI_ERR_ROOT_CMD_FATAL_EN; |
| if (aer_cap) { |
| is_fatal = |
| error_status & pci_get_long(aer_cap + PCI_ERR_UNCOR_SEVER); |
| } |
| if (!is_fatal && (err->flags & PCIE_AER_ERR_MAYBE_ADVISORY)) { |
| inj.error_status = PCI_ERR_COR_ADV_NONFATAL; |
| if (!pcie_aer_inject_cor_error(&inj, error_status, true)) { |
| return 0; |
| } |
| } else { |
| if (!pcie_aer_inject_uncor_error(&inj, is_fatal)) { |
| return 0; |
| } |
| } |
| } |
| |
| /* send up error message */ |
| inj.msg.source_id = err->source_id; |
| pcie_aer_msg(dev, &inj.msg); |
| |
| if (inj.log_overflow) { |
| PCIEAERErr header_log_overflow = { |
| .status = PCI_ERR_COR_HL_OVERFLOW, |
| .flags = PCIE_AER_ERR_IS_CORRECTABLE, |
| }; |
| int ret = pcie_aer_inject_error(dev, &header_log_overflow); |
| assert(!ret); |
| } |
| return 0; |
| } |
| |
| void pcie_aer_write_config(PCIDevice *dev, |
| uint32_t addr, uint32_t val, int len) |
| { |
| uint8_t *aer_cap = dev->config + dev->exp.aer_cap; |
| uint32_t errcap = pci_get_long(aer_cap + PCI_ERR_CAP); |
| uint32_t first_error = 1U << PCI_ERR_CAP_FEP(errcap); |
| uint32_t uncorsta = pci_get_long(aer_cap + PCI_ERR_UNCOR_STATUS); |
| |
| /* uncorrectable error */ |
| if (!(uncorsta & first_error)) { |
| /* the bit that corresponds to the first error is cleared */ |
| pcie_aer_clear_error(dev); |
| } else if (errcap & PCI_ERR_CAP_MHRE) { |
| /* When PCI_ERR_CAP_MHRE is enabled and the first error isn't cleared |
| * nothing should happen. So we have to revert the modification to |
| * the register. |
| */ |
| pcie_aer_update_uncor_status(dev); |
| } else { |
| /* capability & control |
| * PCI_ERR_CAP_MHRE might be cleared, so clear of header log. |
| */ |
| aer_log_clear_all_err(&dev->exp.aer_log); |
| } |
| } |
| |
| void pcie_aer_root_init(PCIDevice *dev) |
| { |
| uint16_t pos = dev->exp.aer_cap; |
| |
| pci_set_long(dev->wmask + pos + PCI_ERR_ROOT_COMMAND, |
| PCI_ERR_ROOT_CMD_EN_MASK); |
| pci_set_long(dev->w1cmask + pos + PCI_ERR_ROOT_STATUS, |
| PCI_ERR_ROOT_STATUS_REPORT_MASK); |
| /* PCI_ERR_ROOT_IRQ is RO but devices change it using a |
| * device-specific method. |
| */ |
| pci_set_long(dev->cmask + pos + PCI_ERR_ROOT_STATUS, |
| ~PCI_ERR_ROOT_IRQ); |
| } |
| |
| void pcie_aer_root_reset(PCIDevice *dev) |
| { |
| uint8_t* aer_cap = dev->config + dev->exp.aer_cap; |
| |
| pci_set_long(aer_cap + PCI_ERR_ROOT_COMMAND, 0); |
| |
| /* |
| * Advanced Error Interrupt Message Number in Root Error Status Register |
| * must be updated by chip dependent code because it's chip dependent |
| * which number is used. |
| */ |
| } |
| |
| void pcie_aer_root_write_config(PCIDevice *dev, |
| uint32_t addr, uint32_t val, int len, |
| uint32_t root_cmd_prev) |
| { |
| uint8_t *aer_cap = dev->config + dev->exp.aer_cap; |
| uint32_t root_status = pci_get_long(aer_cap + PCI_ERR_ROOT_STATUS); |
| uint32_t enabled_cmd = pcie_aer_status_to_cmd(root_status); |
| uint32_t root_cmd = pci_get_long(aer_cap + PCI_ERR_ROOT_COMMAND); |
| /* 6.2.4.1.2 Interrupt Generation */ |
| if (!msix_enabled(dev) && !msi_enabled(dev)) { |
| if (pci_intx(dev) != -1) { |
| pci_set_irq(dev, !!(root_cmd & enabled_cmd)); |
| } |
| return; |
| } |
| |
| if ((root_cmd_prev & enabled_cmd) || !(root_cmd & enabled_cmd)) { |
| /* Send MSI on transition from false to true. */ |
| return; |
| } |
| |
| pcie_aer_root_notify(dev); |
| } |
| |
| static const VMStateDescription vmstate_pcie_aer_err = { |
| .name = "PCIE_AER_ERROR", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(status, PCIEAERErr), |
| VMSTATE_UINT16(source_id, PCIEAERErr), |
| VMSTATE_UINT16(flags, PCIEAERErr), |
| VMSTATE_UINT32_ARRAY(header, PCIEAERErr, 4), |
| VMSTATE_UINT32_ARRAY(prefix, PCIEAERErr, 4), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static bool pcie_aer_state_log_num_valid(void *opaque, int version_id) |
| { |
| PCIEAERLog *s = opaque; |
| |
| return s->log_num <= s->log_max; |
| } |
| |
| const VMStateDescription vmstate_pcie_aer_log = { |
| .name = "PCIE_AER_ERROR_LOG", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT16(log_num, PCIEAERLog), |
| VMSTATE_UINT16_EQUAL(log_max, PCIEAERLog, NULL), |
| VMSTATE_VALIDATE("log_num <= log_max", pcie_aer_state_log_num_valid), |
| VMSTATE_STRUCT_VARRAY_POINTER_UINT16(log, PCIEAERLog, log_num, |
| vmstate_pcie_aer_err, PCIEAERErr), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| typedef struct PCIEAERErrorName { |
| const char *name; |
| uint32_t val; |
| bool correctable; |
| } PCIEAERErrorName; |
| |
| /* |
| * AER error name -> value conversion table |
| * This naming scheme is same to linux aer-injection tool. |
| */ |
| static const struct PCIEAERErrorName pcie_aer_error_list[] = { |
| { |
| .name = "DLP", |
| .val = PCI_ERR_UNC_DLP, |
| .correctable = false, |
| }, { |
| .name = "SDN", |
| .val = PCI_ERR_UNC_SDN, |
| .correctable = false, |
| }, { |
| .name = "POISON_TLP", |
| .val = PCI_ERR_UNC_POISON_TLP, |
| .correctable = false, |
| }, { |
| .name = "FCP", |
| .val = PCI_ERR_UNC_FCP, |
| .correctable = false, |
| }, { |
| .name = "COMP_TIME", |
| .val = PCI_ERR_UNC_COMP_TIME, |
| .correctable = false, |
| }, { |
| .name = "COMP_ABORT", |
| .val = PCI_ERR_UNC_COMP_ABORT, |
| .correctable = false, |
| }, { |
| .name = "UNX_COMP", |
| .val = PCI_ERR_UNC_UNX_COMP, |
| .correctable = false, |
| }, { |
| .name = "RX_OVER", |
| .val = PCI_ERR_UNC_RX_OVER, |
| .correctable = false, |
| }, { |
| .name = "MALF_TLP", |
| .val = PCI_ERR_UNC_MALF_TLP, |
| .correctable = false, |
| }, { |
| .name = "ECRC", |
| .val = PCI_ERR_UNC_ECRC, |
| .correctable = false, |
| }, { |
| .name = "UNSUP", |
| .val = PCI_ERR_UNC_UNSUP, |
| .correctable = false, |
| }, { |
| .name = "ACSV", |
| .val = PCI_ERR_UNC_ACSV, |
| .correctable = false, |
| }, { |
| .name = "INTN", |
| .val = PCI_ERR_UNC_INTN, |
| .correctable = false, |
| }, { |
| .name = "MCBTLP", |
| .val = PCI_ERR_UNC_MCBTLP, |
| .correctable = false, |
| }, { |
| .name = "ATOP_EBLOCKED", |
| .val = PCI_ERR_UNC_ATOP_EBLOCKED, |
| .correctable = false, |
| }, { |
| .name = "TLP_PRF_BLOCKED", |
| .val = PCI_ERR_UNC_TLP_PRF_BLOCKED, |
| .correctable = false, |
| }, { |
| .name = "RCVR", |
| .val = PCI_ERR_COR_RCVR, |
| .correctable = true, |
| }, { |
| .name = "BAD_TLP", |
| .val = PCI_ERR_COR_BAD_TLP, |
| .correctable = true, |
| }, { |
| .name = "BAD_DLLP", |
| .val = PCI_ERR_COR_BAD_DLLP, |
| .correctable = true, |
| }, { |
| .name = "REP_ROLL", |
| .val = PCI_ERR_COR_REP_ROLL, |
| .correctable = true, |
| }, { |
| .name = "REP_TIMER", |
| .val = PCI_ERR_COR_REP_TIMER, |
| .correctable = true, |
| }, { |
| .name = "ADV_NONFATAL", |
| .val = PCI_ERR_COR_ADV_NONFATAL, |
| .correctable = true, |
| }, { |
| .name = "INTERNAL", |
| .val = PCI_ERR_COR_INTERNAL, |
| .correctable = true, |
| }, { |
| .name = "HL_OVERFLOW", |
| .val = PCI_ERR_COR_HL_OVERFLOW, |
| .correctable = true, |
| }, |
| }; |
| |
| int pcie_aer_parse_error_string(const char *error_name, |
| uint32_t *status, bool *correctable) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(pcie_aer_error_list); i++) { |
| const PCIEAERErrorName *e = &pcie_aer_error_list[i]; |
| if (strcmp(error_name, e->name)) { |
| continue; |
| } |
| |
| *status = e->val; |
| *correctable = e->correctable; |
| return 0; |
| } |
| return -EINVAL; |
| } |
