| /* |
| * Xilinx Zynq MPSoC emulation |
| * |
| * Copyright (C) 2015 Xilinx Inc |
| * Written by Peter Crosthwaite <peter.crosthwaite@xilinx.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "qemu/module.h" |
| #include "hw/arm/xlnx-zynqmp.h" |
| #include "hw/intc/arm_gic_common.h" |
| #include "hw/misc/unimp.h" |
| #include "hw/boards.h" |
| #include "sysemu/kvm.h" |
| #include "sysemu/sysemu.h" |
| #include "kvm_arm.h" |
| #include "target/arm/cpu-qom.h" |
| #include "target/arm/gtimer.h" |
| |
| #define GIC_NUM_SPI_INTR 160 |
| |
| #define ARM_PHYS_TIMER_PPI 30 |
| #define ARM_VIRT_TIMER_PPI 27 |
| #define ARM_HYP_TIMER_PPI 26 |
| #define ARM_SEC_TIMER_PPI 29 |
| #define GIC_MAINTENANCE_PPI 25 |
| |
| #define GEM_REVISION 0x40070106 |
| |
| #define GIC_BASE_ADDR 0xf9000000 |
| #define GIC_DIST_ADDR 0xf9010000 |
| #define GIC_CPU_ADDR 0xf9020000 |
| #define GIC_VIFACE_ADDR 0xf9040000 |
| #define GIC_VCPU_ADDR 0xf9060000 |
| |
| #define SATA_INTR 133 |
| #define SATA_ADDR 0xFD0C0000 |
| #define SATA_NUM_PORTS 2 |
| |
| #define QSPI_ADDR 0xff0f0000 |
| #define LQSPI_ADDR 0xc0000000 |
| #define QSPI_IRQ 15 |
| #define QSPI_DMA_ADDR 0xff0f0800 |
| #define NUM_QSPI_IRQ_LINES 2 |
| |
| #define CRF_ADDR 0xfd1a0000 |
| #define CRF_IRQ 120 |
| |
| /* Serializer/Deserializer. */ |
| #define SERDES_ADDR 0xfd400000 |
| #define SERDES_SIZE 0x20000 |
| |
| #define DP_ADDR 0xfd4a0000 |
| #define DP_IRQ 0x77 |
| |
| #define DPDMA_ADDR 0xfd4c0000 |
| #define DPDMA_IRQ 0x7a |
| |
| #define APU_ADDR 0xfd5c0000 |
| #define APU_IRQ 153 |
| |
| #define TTC0_ADDR 0xFF110000 |
| #define TTC0_IRQ 36 |
| |
| #define IPI_ADDR 0xFF300000 |
| #define IPI_IRQ 64 |
| |
| #define RTC_ADDR 0xffa60000 |
| #define RTC_IRQ 26 |
| |
| #define BBRAM_ADDR 0xffcd0000 |
| #define BBRAM_IRQ 11 |
| |
| #define EFUSE_ADDR 0xffcc0000 |
| #define EFUSE_IRQ 87 |
| |
| #define SDHCI_CAPABILITIES 0x280737ec6481 /* Datasheet: UG1085 (v1.7) */ |
| |
| static const uint64_t gem_addr[XLNX_ZYNQMP_NUM_GEMS] = { |
| 0xFF0B0000, 0xFF0C0000, 0xFF0D0000, 0xFF0E0000, |
| }; |
| |
| static const int gem_intr[XLNX_ZYNQMP_NUM_GEMS] = { |
| 57, 59, 61, 63, |
| }; |
| |
| static const uint64_t uart_addr[XLNX_ZYNQMP_NUM_UARTS] = { |
| 0xFF000000, 0xFF010000, |
| }; |
| |
| static const int uart_intr[XLNX_ZYNQMP_NUM_UARTS] = { |
| 21, 22, |
| }; |
| |
| static const uint64_t can_addr[XLNX_ZYNQMP_NUM_CAN] = { |
| 0xFF060000, 0xFF070000, |
| }; |
| |
| static const int can_intr[XLNX_ZYNQMP_NUM_CAN] = { |
| 23, 24, |
| }; |
| |
| static const uint64_t sdhci_addr[XLNX_ZYNQMP_NUM_SDHCI] = { |
| 0xFF160000, 0xFF170000, |
| }; |
| |
| static const int sdhci_intr[XLNX_ZYNQMP_NUM_SDHCI] = { |
| 48, 49, |
| }; |
| |
| static const uint64_t spi_addr[XLNX_ZYNQMP_NUM_SPIS] = { |
| 0xFF040000, 0xFF050000, |
| }; |
| |
| static const int spi_intr[XLNX_ZYNQMP_NUM_SPIS] = { |
| 19, 20, |
| }; |
| |
| static const uint64_t gdma_ch_addr[XLNX_ZYNQMP_NUM_GDMA_CH] = { |
| 0xFD500000, 0xFD510000, 0xFD520000, 0xFD530000, |
| 0xFD540000, 0xFD550000, 0xFD560000, 0xFD570000 |
| }; |
| |
| static const int gdma_ch_intr[XLNX_ZYNQMP_NUM_GDMA_CH] = { |
| 124, 125, 126, 127, 128, 129, 130, 131 |
| }; |
| |
| static const uint64_t adma_ch_addr[XLNX_ZYNQMP_NUM_ADMA_CH] = { |
| 0xFFA80000, 0xFFA90000, 0xFFAA0000, 0xFFAB0000, |
| 0xFFAC0000, 0xFFAD0000, 0xFFAE0000, 0xFFAF0000 |
| }; |
| |
| static const int adma_ch_intr[XLNX_ZYNQMP_NUM_ADMA_CH] = { |
| 77, 78, 79, 80, 81, 82, 83, 84 |
| }; |
| |
| static const uint64_t usb_addr[XLNX_ZYNQMP_NUM_USB] = { |
| 0xFE200000, 0xFE300000 |
| }; |
| |
| static const int usb_intr[XLNX_ZYNQMP_NUM_USB] = { |
| 65, 70 |
| }; |
| |
| typedef struct XlnxZynqMPGICRegion { |
| int region_index; |
| uint32_t address; |
| uint32_t offset; |
| bool virt; |
| } XlnxZynqMPGICRegion; |
| |
| static const XlnxZynqMPGICRegion xlnx_zynqmp_gic_regions[] = { |
| /* Distributor */ |
| { |
| .region_index = 0, |
| .address = GIC_DIST_ADDR, |
| .offset = 0, |
| .virt = false |
| }, |
| |
| /* CPU interface */ |
| { |
| .region_index = 1, |
| .address = GIC_CPU_ADDR, |
| .offset = 0, |
| .virt = false |
| }, |
| { |
| .region_index = 1, |
| .address = GIC_CPU_ADDR + 0x10000, |
| .offset = 0x1000, |
| .virt = false |
| }, |
| |
| /* Virtual interface */ |
| { |
| .region_index = 2, |
| .address = GIC_VIFACE_ADDR, |
| .offset = 0, |
| .virt = true |
| }, |
| |
| /* Virtual CPU interface */ |
| { |
| .region_index = 3, |
| .address = GIC_VCPU_ADDR, |
| .offset = 0, |
| .virt = true |
| }, |
| { |
| .region_index = 3, |
| .address = GIC_VCPU_ADDR + 0x10000, |
| .offset = 0x1000, |
| .virt = true |
| }, |
| }; |
| |
| static inline int arm_gic_ppi_index(int cpu_nr, int ppi_index) |
| { |
| return GIC_NUM_SPI_INTR + cpu_nr * GIC_INTERNAL + ppi_index; |
| } |
| |
| static void xlnx_zynqmp_create_rpu(MachineState *ms, XlnxZynqMPState *s, |
| const char *boot_cpu, Error **errp) |
| { |
| int i; |
| int num_rpus = MIN((int)(ms->smp.cpus - XLNX_ZYNQMP_NUM_APU_CPUS), |
| XLNX_ZYNQMP_NUM_RPU_CPUS); |
| |
| if (num_rpus <= 0) { |
| /* Don't create rpu-cluster object if there's nothing to put in it */ |
| return; |
| } |
| |
| object_initialize_child(OBJECT(s), "rpu-cluster", &s->rpu_cluster, |
| TYPE_CPU_CLUSTER); |
| qdev_prop_set_uint32(DEVICE(&s->rpu_cluster), "cluster-id", 1); |
| |
| for (i = 0; i < num_rpus; i++) { |
| const char *name; |
| |
| object_initialize_child(OBJECT(&s->rpu_cluster), "rpu-cpu[*]", |
| &s->rpu_cpu[i], |
| ARM_CPU_TYPE_NAME("cortex-r5f")); |
| |
| name = object_get_canonical_path_component(OBJECT(&s->rpu_cpu[i])); |
| if (strcmp(name, boot_cpu)) { |
| /* |
| * Secondary CPUs start in powered-down state. |
| */ |
| object_property_set_bool(OBJECT(&s->rpu_cpu[i]), |
| "start-powered-off", true, &error_abort); |
| } else { |
| s->boot_cpu_ptr = &s->rpu_cpu[i]; |
| } |
| |
| object_property_set_bool(OBJECT(&s->rpu_cpu[i]), "reset-hivecs", true, |
| &error_abort); |
| if (!qdev_realize(DEVICE(&s->rpu_cpu[i]), NULL, errp)) { |
| return; |
| } |
| } |
| |
| qdev_realize(DEVICE(&s->rpu_cluster), NULL, &error_fatal); |
| } |
| |
| static void xlnx_zynqmp_create_bbram(XlnxZynqMPState *s, qemu_irq *gic) |
| { |
| SysBusDevice *sbd; |
| |
| object_initialize_child_with_props(OBJECT(s), "bbram", &s->bbram, |
| sizeof(s->bbram), TYPE_XLNX_BBRAM, |
| &error_fatal, |
| "crc-zpads", "1", |
| NULL); |
| sbd = SYS_BUS_DEVICE(&s->bbram); |
| |
| sysbus_realize(sbd, &error_fatal); |
| sysbus_mmio_map(sbd, 0, BBRAM_ADDR); |
| sysbus_connect_irq(sbd, 0, gic[BBRAM_IRQ]); |
| } |
| |
| static void xlnx_zynqmp_create_efuse(XlnxZynqMPState *s, qemu_irq *gic) |
| { |
| Object *bits = OBJECT(&s->efuse); |
| Object *ctrl = OBJECT(&s->efuse_ctrl); |
| SysBusDevice *sbd; |
| |
| object_initialize_child(OBJECT(s), "efuse-ctrl", &s->efuse_ctrl, |
| TYPE_XLNX_ZYNQMP_EFUSE); |
| |
| object_initialize_child_with_props(ctrl, "xlnx-efuse@0", bits, |
| sizeof(s->efuse), |
| TYPE_XLNX_EFUSE, &error_abort, |
| "efuse-nr", "3", |
| "efuse-size", "2048", |
| NULL); |
| |
| qdev_realize(DEVICE(bits), NULL, &error_abort); |
| object_property_set_link(ctrl, "efuse", bits, &error_abort); |
| |
| sbd = SYS_BUS_DEVICE(ctrl); |
| sysbus_realize(sbd, &error_abort); |
| sysbus_mmio_map(sbd, 0, EFUSE_ADDR); |
| sysbus_connect_irq(sbd, 0, gic[EFUSE_IRQ]); |
| } |
| |
| static void xlnx_zynqmp_create_apu_ctrl(XlnxZynqMPState *s, qemu_irq *gic) |
| { |
| SysBusDevice *sbd; |
| int i; |
| |
| object_initialize_child(OBJECT(s), "apu-ctrl", &s->apu_ctrl, |
| TYPE_XLNX_ZYNQMP_APU_CTRL); |
| sbd = SYS_BUS_DEVICE(&s->apu_ctrl); |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_APU_CPUS; i++) { |
| g_autofree gchar *name = g_strdup_printf("cpu%d", i); |
| |
| object_property_set_link(OBJECT(&s->apu_ctrl), name, |
| OBJECT(&s->apu_cpu[i]), &error_abort); |
| } |
| |
| sysbus_realize(sbd, &error_fatal); |
| sysbus_mmio_map(sbd, 0, APU_ADDR); |
| sysbus_connect_irq(sbd, 0, gic[APU_IRQ]); |
| } |
| |
| static void xlnx_zynqmp_create_crf(XlnxZynqMPState *s, qemu_irq *gic) |
| { |
| SysBusDevice *sbd; |
| |
| object_initialize_child(OBJECT(s), "crf", &s->crf, TYPE_XLNX_ZYNQMP_CRF); |
| sbd = SYS_BUS_DEVICE(&s->crf); |
| |
| sysbus_realize(sbd, &error_fatal); |
| sysbus_mmio_map(sbd, 0, CRF_ADDR); |
| sysbus_connect_irq(sbd, 0, gic[CRF_IRQ]); |
| } |
| |
| static void xlnx_zynqmp_create_ttc(XlnxZynqMPState *s, qemu_irq *gic) |
| { |
| SysBusDevice *sbd; |
| int i, irq; |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_TTC; i++) { |
| object_initialize_child(OBJECT(s), "ttc[*]", &s->ttc[i], |
| TYPE_CADENCE_TTC); |
| sbd = SYS_BUS_DEVICE(&s->ttc[i]); |
| |
| sysbus_realize(sbd, &error_fatal); |
| sysbus_mmio_map(sbd, 0, TTC0_ADDR + i * 0x10000); |
| for (irq = 0; irq < 3; irq++) { |
| sysbus_connect_irq(sbd, irq, gic[TTC0_IRQ + i * 3 + irq]); |
| } |
| } |
| } |
| |
| static void xlnx_zynqmp_create_unimp_mmio(XlnxZynqMPState *s) |
| { |
| static const struct UnimpInfo { |
| const char *name; |
| hwaddr base; |
| hwaddr size; |
| } unimp_areas[ARRAY_SIZE(s->mr_unimp)] = { |
| { .name = "serdes", SERDES_ADDR, SERDES_SIZE }, |
| }; |
| unsigned int nr; |
| |
| for (nr = 0; nr < ARRAY_SIZE(unimp_areas); nr++) { |
| const struct UnimpInfo *info = &unimp_areas[nr]; |
| DeviceState *dev = qdev_new(TYPE_UNIMPLEMENTED_DEVICE); |
| SysBusDevice *sbd = SYS_BUS_DEVICE(dev); |
| |
| assert(info->name && info->base && info->size > 0); |
| qdev_prop_set_string(dev, "name", info->name); |
| qdev_prop_set_uint64(dev, "size", info->size); |
| object_property_add_child(OBJECT(s), info->name, OBJECT(dev)); |
| |
| sysbus_realize_and_unref(sbd, &error_fatal); |
| sysbus_mmio_map(sbd, 0, info->base); |
| } |
| } |
| |
| static void xlnx_zynqmp_init(Object *obj) |
| { |
| MachineState *ms = MACHINE(qdev_get_machine()); |
| XlnxZynqMPState *s = XLNX_ZYNQMP(obj); |
| int i; |
| int num_apus = MIN(ms->smp.cpus, XLNX_ZYNQMP_NUM_APU_CPUS); |
| |
| object_initialize_child(obj, "apu-cluster", &s->apu_cluster, |
| TYPE_CPU_CLUSTER); |
| qdev_prop_set_uint32(DEVICE(&s->apu_cluster), "cluster-id", 0); |
| |
| for (i = 0; i < num_apus; i++) { |
| object_initialize_child(OBJECT(&s->apu_cluster), "apu-cpu[*]", |
| &s->apu_cpu[i], |
| ARM_CPU_TYPE_NAME("cortex-a53")); |
| } |
| |
| object_initialize_child(obj, "gic", &s->gic, gic_class_name()); |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_GEMS; i++) { |
| object_initialize_child(obj, "gem[*]", &s->gem[i], TYPE_CADENCE_GEM); |
| } |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_UARTS; i++) { |
| object_initialize_child(obj, "uart[*]", &s->uart[i], |
| TYPE_CADENCE_UART); |
| } |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_CAN; i++) { |
| object_initialize_child(obj, "can[*]", &s->can[i], |
| TYPE_XLNX_ZYNQMP_CAN); |
| } |
| |
| object_initialize_child(obj, "sata", &s->sata, TYPE_SYSBUS_AHCI); |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_SDHCI; i++) { |
| object_initialize_child(obj, "sdhci[*]", &s->sdhci[i], |
| TYPE_SYSBUS_SDHCI); |
| } |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_SPIS; i++) { |
| object_initialize_child(obj, "spi[*]", &s->spi[i], TYPE_XILINX_SPIPS); |
| } |
| |
| object_initialize_child(obj, "qspi", &s->qspi, TYPE_XLNX_ZYNQMP_QSPIPS); |
| |
| object_initialize_child(obj, "xxxdp", &s->dp, TYPE_XLNX_DP); |
| |
| object_initialize_child(obj, "dp-dma", &s->dpdma, TYPE_XLNX_DPDMA); |
| |
| object_initialize_child(obj, "ipi", &s->ipi, TYPE_XLNX_ZYNQMP_IPI); |
| |
| object_initialize_child(obj, "rtc", &s->rtc, TYPE_XLNX_ZYNQMP_RTC); |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_GDMA_CH; i++) { |
| object_initialize_child(obj, "gdma[*]", &s->gdma[i], TYPE_XLNX_ZDMA); |
| } |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_ADMA_CH; i++) { |
| object_initialize_child(obj, "adma[*]", &s->adma[i], TYPE_XLNX_ZDMA); |
| } |
| |
| object_initialize_child(obj, "qspi-dma", &s->qspi_dma, TYPE_XLNX_CSU_DMA); |
| object_initialize_child(obj, "qspi-irq-orgate", |
| &s->qspi_irq_orgate, TYPE_OR_IRQ); |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_USB; i++) { |
| object_initialize_child(obj, "usb[*]", &s->usb[i], TYPE_USB_DWC3); |
| } |
| } |
| |
| static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp) |
| { |
| MachineState *ms = MACHINE(qdev_get_machine()); |
| XlnxZynqMPState *s = XLNX_ZYNQMP(dev); |
| MemoryRegion *system_memory = get_system_memory(); |
| uint8_t i; |
| uint64_t ram_size; |
| int num_apus = MIN(ms->smp.cpus, XLNX_ZYNQMP_NUM_APU_CPUS); |
| const char *boot_cpu = s->boot_cpu ? s->boot_cpu : "apu-cpu[0]"; |
| ram_addr_t ddr_low_size, ddr_high_size; |
| qemu_irq gic_spi[GIC_NUM_SPI_INTR]; |
| Error *err = NULL; |
| |
| ram_size = memory_region_size(s->ddr_ram); |
| |
| /* |
| * Create the DDR Memory Regions. User friendly checks should happen at |
| * the board level |
| */ |
| if (ram_size > XLNX_ZYNQMP_MAX_LOW_RAM_SIZE) { |
| /* |
| * The RAM size is above the maximum available for the low DDR. |
| * Create the high DDR memory region as well. |
| */ |
| assert(ram_size <= XLNX_ZYNQMP_MAX_RAM_SIZE); |
| ddr_low_size = XLNX_ZYNQMP_MAX_LOW_RAM_SIZE; |
| ddr_high_size = ram_size - XLNX_ZYNQMP_MAX_LOW_RAM_SIZE; |
| |
| memory_region_init_alias(&s->ddr_ram_high, OBJECT(dev), |
| "ddr-ram-high", s->ddr_ram, ddr_low_size, |
| ddr_high_size); |
| memory_region_add_subregion(get_system_memory(), |
| XLNX_ZYNQMP_HIGH_RAM_START, |
| &s->ddr_ram_high); |
| } else { |
| /* RAM must be non-zero */ |
| assert(ram_size); |
| ddr_low_size = ram_size; |
| } |
| |
| memory_region_init_alias(&s->ddr_ram_low, OBJECT(dev), "ddr-ram-low", |
| s->ddr_ram, 0, ddr_low_size); |
| memory_region_add_subregion(get_system_memory(), 0, &s->ddr_ram_low); |
| |
| /* Create the four OCM banks */ |
| for (i = 0; i < XLNX_ZYNQMP_NUM_OCM_BANKS; i++) { |
| char *ocm_name = g_strdup_printf("zynqmp.ocm_ram_bank_%d", i); |
| |
| memory_region_init_ram(&s->ocm_ram[i], NULL, ocm_name, |
| XLNX_ZYNQMP_OCM_RAM_SIZE, &error_fatal); |
| memory_region_add_subregion(get_system_memory(), |
| XLNX_ZYNQMP_OCM_RAM_0_ADDRESS + |
| i * XLNX_ZYNQMP_OCM_RAM_SIZE, |
| &s->ocm_ram[i]); |
| |
| g_free(ocm_name); |
| } |
| |
| qdev_prop_set_uint32(DEVICE(&s->gic), "num-irq", GIC_NUM_SPI_INTR + 32); |
| qdev_prop_set_uint32(DEVICE(&s->gic), "revision", 2); |
| qdev_prop_set_uint32(DEVICE(&s->gic), "num-cpu", num_apus); |
| qdev_prop_set_bit(DEVICE(&s->gic), "has-security-extensions", s->secure); |
| qdev_prop_set_bit(DEVICE(&s->gic), |
| "has-virtualization-extensions", s->virt); |
| |
| qdev_realize(DEVICE(&s->apu_cluster), NULL, &error_fatal); |
| |
| /* Realize APUs before realizing the GIC. KVM requires this. */ |
| for (i = 0; i < num_apus; i++) { |
| const char *name; |
| |
| name = object_get_canonical_path_component(OBJECT(&s->apu_cpu[i])); |
| if (strcmp(name, boot_cpu)) { |
| /* |
| * Secondary CPUs start in powered-down state. |
| */ |
| object_property_set_bool(OBJECT(&s->apu_cpu[i]), |
| "start-powered-off", true, &error_abort); |
| } else { |
| s->boot_cpu_ptr = &s->apu_cpu[i]; |
| } |
| |
| object_property_set_bool(OBJECT(&s->apu_cpu[i]), "has_el3", s->secure, |
| NULL); |
| object_property_set_bool(OBJECT(&s->apu_cpu[i]), "has_el2", s->virt, |
| NULL); |
| object_property_set_int(OBJECT(&s->apu_cpu[i]), "reset-cbar", |
| GIC_BASE_ADDR, &error_abort); |
| object_property_set_int(OBJECT(&s->apu_cpu[i]), "core-count", |
| num_apus, &error_abort); |
| if (!qdev_realize(DEVICE(&s->apu_cpu[i]), NULL, errp)) { |
| return; |
| } |
| } |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->gic), errp)) { |
| return; |
| } |
| |
| assert(ARRAY_SIZE(xlnx_zynqmp_gic_regions) == XLNX_ZYNQMP_GIC_REGIONS); |
| for (i = 0; i < XLNX_ZYNQMP_GIC_REGIONS; i++) { |
| SysBusDevice *gic = SYS_BUS_DEVICE(&s->gic); |
| const XlnxZynqMPGICRegion *r = &xlnx_zynqmp_gic_regions[i]; |
| MemoryRegion *mr; |
| uint32_t addr = r->address; |
| int j; |
| |
| if (r->virt && !s->virt) { |
| continue; |
| } |
| |
| mr = sysbus_mmio_get_region(gic, r->region_index); |
| for (j = 0; j < XLNX_ZYNQMP_GIC_ALIASES; j++) { |
| MemoryRegion *alias = &s->gic_mr[i][j]; |
| |
| memory_region_init_alias(alias, OBJECT(s), "zynqmp-gic-alias", mr, |
| r->offset, XLNX_ZYNQMP_GIC_REGION_SIZE); |
| memory_region_add_subregion(system_memory, addr, alias); |
| |
| addr += XLNX_ZYNQMP_GIC_REGION_SIZE; |
| } |
| } |
| |
| for (i = 0; i < num_apus; i++) { |
| qemu_irq irq; |
| |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i, |
| qdev_get_gpio_in(DEVICE(&s->apu_cpu[i]), |
| ARM_CPU_IRQ)); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + num_apus, |
| qdev_get_gpio_in(DEVICE(&s->apu_cpu[i]), |
| ARM_CPU_FIQ)); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + num_apus * 2, |
| qdev_get_gpio_in(DEVICE(&s->apu_cpu[i]), |
| ARM_CPU_VIRQ)); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + num_apus * 3, |
| qdev_get_gpio_in(DEVICE(&s->apu_cpu[i]), |
| ARM_CPU_VFIQ)); |
| irq = qdev_get_gpio_in(DEVICE(&s->gic), |
| arm_gic_ppi_index(i, ARM_PHYS_TIMER_PPI)); |
| qdev_connect_gpio_out(DEVICE(&s->apu_cpu[i]), GTIMER_PHYS, irq); |
| irq = qdev_get_gpio_in(DEVICE(&s->gic), |
| arm_gic_ppi_index(i, ARM_VIRT_TIMER_PPI)); |
| qdev_connect_gpio_out(DEVICE(&s->apu_cpu[i]), GTIMER_VIRT, irq); |
| irq = qdev_get_gpio_in(DEVICE(&s->gic), |
| arm_gic_ppi_index(i, ARM_HYP_TIMER_PPI)); |
| qdev_connect_gpio_out(DEVICE(&s->apu_cpu[i]), GTIMER_HYP, irq); |
| irq = qdev_get_gpio_in(DEVICE(&s->gic), |
| arm_gic_ppi_index(i, ARM_SEC_TIMER_PPI)); |
| qdev_connect_gpio_out(DEVICE(&s->apu_cpu[i]), GTIMER_SEC, irq); |
| |
| if (s->virt) { |
| irq = qdev_get_gpio_in(DEVICE(&s->gic), |
| arm_gic_ppi_index(i, GIC_MAINTENANCE_PPI)); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + num_apus * 4, irq); |
| } |
| } |
| |
| xlnx_zynqmp_create_rpu(ms, s, boot_cpu, &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| |
| if (!s->boot_cpu_ptr) { |
| error_setg(errp, "ZynqMP Boot cpu %s not found", boot_cpu); |
| return; |
| } |
| |
| for (i = 0; i < GIC_NUM_SPI_INTR; i++) { |
| gic_spi[i] = qdev_get_gpio_in(DEVICE(&s->gic), i); |
| } |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_GEMS; i++) { |
| NICInfo *nd = &nd_table[i]; |
| |
| /* FIXME use qdev NIC properties instead of nd_table[] */ |
| if (nd->used) { |
| qemu_check_nic_model(nd, TYPE_CADENCE_GEM); |
| qdev_set_nic_properties(DEVICE(&s->gem[i]), nd); |
| } |
| object_property_set_int(OBJECT(&s->gem[i]), "revision", GEM_REVISION, |
| &error_abort); |
| object_property_set_int(OBJECT(&s->gem[i]), "phy-addr", 23, |
| &error_abort); |
| object_property_set_int(OBJECT(&s->gem[i]), "num-priority-queues", 2, |
| &error_abort); |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->gem[i]), errp)) { |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->gem[i]), 0, gem_addr[i]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem[i]), 0, |
| gic_spi[gem_intr[i]]); |
| } |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_UARTS; i++) { |
| qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i)); |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), errp)) { |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, uart_addr[i]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0, |
| gic_spi[uart_intr[i]]); |
| } |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_CAN; i++) { |
| object_property_set_int(OBJECT(&s->can[i]), "ext_clk_freq", |
| XLNX_ZYNQMP_CAN_REF_CLK, &error_abort); |
| |
| object_property_set_link(OBJECT(&s->can[i]), "canbus", |
| OBJECT(s->canbus[i]), &error_fatal); |
| |
| sysbus_realize(SYS_BUS_DEVICE(&s->can[i]), &err); |
| if (err) { |
| error_propagate(errp, err); |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->can[i]), 0, can_addr[i]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->can[i]), 0, |
| gic_spi[can_intr[i]]); |
| } |
| |
| object_property_set_int(OBJECT(&s->sata), "num-ports", SATA_NUM_PORTS, |
| &error_abort); |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->sata), errp)) { |
| return; |
| } |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->sata), 0, SATA_ADDR); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->sata), 0, gic_spi[SATA_INTR]); |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_SDHCI; i++) { |
| char *bus_name; |
| SysBusDevice *sbd = SYS_BUS_DEVICE(&s->sdhci[i]); |
| Object *sdhci = OBJECT(&s->sdhci[i]); |
| |
| /* |
| * Compatible with: |
| * - SD Host Controller Specification Version 3.00 |
| * - SDIO Specification Version 3.0 |
| * - eMMC Specification Version 4.51 |
| */ |
| if (!object_property_set_uint(sdhci, "sd-spec-version", 3, errp)) { |
| return; |
| } |
| if (!object_property_set_uint(sdhci, "capareg", SDHCI_CAPABILITIES, |
| errp)) { |
| return; |
| } |
| if (!object_property_set_uint(sdhci, "uhs", UHS_I, errp)) { |
| return; |
| } |
| if (!sysbus_realize(SYS_BUS_DEVICE(sdhci), errp)) { |
| return; |
| } |
| sysbus_mmio_map(sbd, 0, sdhci_addr[i]); |
| sysbus_connect_irq(sbd, 0, gic_spi[sdhci_intr[i]]); |
| |
| /* Alias controller SD bus to the SoC itself */ |
| bus_name = g_strdup_printf("sd-bus%d", i); |
| object_property_add_alias(OBJECT(s), bus_name, sdhci, "sd-bus"); |
| g_free(bus_name); |
| } |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_SPIS; i++) { |
| gchar *bus_name; |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) { |
| return; |
| } |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_addr[i]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0, |
| gic_spi[spi_intr[i]]); |
| |
| /* Alias controller SPI bus to the SoC itself */ |
| bus_name = g_strdup_printf("spi%d", i); |
| object_property_add_alias(OBJECT(s), bus_name, |
| OBJECT(&s->spi[i]), "spi0"); |
| g_free(bus_name); |
| } |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->dp), errp)) { |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->dp), 0, DP_ADDR); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->dp), 0, gic_spi[DP_IRQ]); |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->dpdma), errp)) { |
| return; |
| } |
| object_property_set_link(OBJECT(&s->dp), "dpdma", OBJECT(&s->dpdma), |
| &error_abort); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->dpdma), 0, DPDMA_ADDR); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->dpdma), 0, gic_spi[DPDMA_IRQ]); |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->ipi), errp)) { |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->ipi), 0, IPI_ADDR); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->ipi), 0, gic_spi[IPI_IRQ]); |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->rtc), errp)) { |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, RTC_ADDR); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, gic_spi[RTC_IRQ]); |
| |
| xlnx_zynqmp_create_bbram(s, gic_spi); |
| xlnx_zynqmp_create_efuse(s, gic_spi); |
| xlnx_zynqmp_create_apu_ctrl(s, gic_spi); |
| xlnx_zynqmp_create_crf(s, gic_spi); |
| xlnx_zynqmp_create_ttc(s, gic_spi); |
| xlnx_zynqmp_create_unimp_mmio(s); |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_GDMA_CH; i++) { |
| if (!object_property_set_uint(OBJECT(&s->gdma[i]), "bus-width", 128, |
| errp)) { |
| return; |
| } |
| if (!object_property_set_link(OBJECT(&s->gdma[i]), "dma", |
| OBJECT(system_memory), errp)) { |
| return; |
| } |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->gdma[i]), errp)) { |
| return; |
| } |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->gdma[i]), 0, gdma_ch_addr[i]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->gdma[i]), 0, |
| gic_spi[gdma_ch_intr[i]]); |
| } |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_ADMA_CH; i++) { |
| if (!object_property_set_link(OBJECT(&s->adma[i]), "dma", |
| OBJECT(system_memory), errp)) { |
| return; |
| } |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->adma[i]), errp)) { |
| return; |
| } |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->adma[i]), 0, adma_ch_addr[i]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->adma[i]), 0, |
| gic_spi[adma_ch_intr[i]]); |
| } |
| |
| object_property_set_int(OBJECT(&s->qspi_irq_orgate), |
| "num-lines", NUM_QSPI_IRQ_LINES, &error_fatal); |
| qdev_realize(DEVICE(&s->qspi_irq_orgate), NULL, &error_fatal); |
| qdev_connect_gpio_out(DEVICE(&s->qspi_irq_orgate), 0, gic_spi[QSPI_IRQ]); |
| |
| if (!object_property_set_link(OBJECT(&s->qspi_dma), "dma", |
| OBJECT(system_memory), errp)) { |
| return; |
| } |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->qspi_dma), errp)) { |
| return; |
| } |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi_dma), 0, QSPI_DMA_ADDR); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi_dma), 0, |
| qdev_get_gpio_in(DEVICE(&s->qspi_irq_orgate), 0)); |
| |
| if (!object_property_set_link(OBJECT(&s->qspi), "stream-connected-dma", |
| OBJECT(&s->qspi_dma), errp)) { |
| return; |
| } |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->qspi), errp)) { |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi), 0, QSPI_ADDR); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->qspi), 1, LQSPI_ADDR); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->qspi), 0, |
| qdev_get_gpio_in(DEVICE(&s->qspi_irq_orgate), 1)); |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_QSPI_BUS; i++) { |
| g_autofree gchar *bus_name = g_strdup_printf("qspi%d", i); |
| g_autofree gchar *target_bus = g_strdup_printf("spi%d", i); |
| |
| /* Alias controller SPI bus to the SoC itself */ |
| object_property_add_alias(OBJECT(s), bus_name, |
| OBJECT(&s->qspi), target_bus); |
| } |
| |
| for (i = 0; i < XLNX_ZYNQMP_NUM_USB; i++) { |
| if (!object_property_set_link(OBJECT(&s->usb[i].sysbus_xhci), "dma", |
| OBJECT(system_memory), errp)) { |
| return; |
| } |
| |
| qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "intrs", 4); |
| qdev_prop_set_uint32(DEVICE(&s->usb[i].sysbus_xhci), "slots", 2); |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), errp)) { |
| return; |
| } |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, usb_addr[i]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i].sysbus_xhci), 0, |
| gic_spi[usb_intr[i]]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i].sysbus_xhci), 1, |
| gic_spi[usb_intr[i] + 1]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i].sysbus_xhci), 2, |
| gic_spi[usb_intr[i] + 2]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i].sysbus_xhci), 3, |
| gic_spi[usb_intr[i] + 3]); |
| } |
| } |
| |
| static Property xlnx_zynqmp_props[] = { |
| DEFINE_PROP_STRING("boot-cpu", XlnxZynqMPState, boot_cpu), |
| DEFINE_PROP_BOOL("secure", XlnxZynqMPState, secure, false), |
| DEFINE_PROP_BOOL("virtualization", XlnxZynqMPState, virt, false), |
| DEFINE_PROP_LINK("ddr-ram", XlnxZynqMPState, ddr_ram, TYPE_MEMORY_REGION, |
| MemoryRegion *), |
| DEFINE_PROP_LINK("canbus0", XlnxZynqMPState, canbus[0], TYPE_CAN_BUS, |
| CanBusState *), |
| DEFINE_PROP_LINK("canbus1", XlnxZynqMPState, canbus[1], TYPE_CAN_BUS, |
| CanBusState *), |
| DEFINE_PROP_END_OF_LIST() |
| }; |
| |
| static void xlnx_zynqmp_class_init(ObjectClass *oc, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(oc); |
| |
| device_class_set_props(dc, xlnx_zynqmp_props); |
| dc->realize = xlnx_zynqmp_realize; |
| /* Reason: Uses serial_hds in realize function, thus can't be used twice */ |
| dc->user_creatable = false; |
| } |
| |
| static const TypeInfo xlnx_zynqmp_type_info = { |
| .name = TYPE_XLNX_ZYNQMP, |
| .parent = TYPE_DEVICE, |
| .instance_size = sizeof(XlnxZynqMPState), |
| .instance_init = xlnx_zynqmp_init, |
| .class_init = xlnx_zynqmp_class_init, |
| }; |
| |
| static void xlnx_zynqmp_register_types(void) |
| { |
| type_register_static(&xlnx_zynqmp_type_info); |
| } |
| |
| type_init(xlnx_zynqmp_register_types) |