| /* |
| * PXA270-based Clamshell PDA platforms. |
| * |
| * Copyright (c) 2006 Openedhand Ltd. |
| * Written by Andrzej Zaborowski <balrog@zabor.org> |
| * |
| * This code is licensed under the GNU GPL v2. |
| * |
| * Contributions after 2012-01-13 are licensed under the terms of the |
| * GNU GPL, version 2 or (at your option) any later version. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "hw/arm/pxa.h" |
| #include "hw/arm/boot.h" |
| #include "sysemu/runstate.h" |
| #include "sysemu/sysemu.h" |
| #include "hw/pcmcia.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/i2c/i2c.h" |
| #include "hw/irq.h" |
| #include "hw/ssi/ssi.h" |
| #include "hw/block/flash.h" |
| #include "qemu/timer.h" |
| #include "qemu/log.h" |
| #include "hw/arm/sharpsl.h" |
| #include "ui/console.h" |
| #include "hw/audio/wm8750.h" |
| #include "audio/audio.h" |
| #include "hw/boards.h" |
| #include "hw/sysbus.h" |
| #include "hw/misc/max111x.h" |
| #include "migration/vmstate.h" |
| #include "exec/address-spaces.h" |
| #include "cpu.h" |
| |
| enum spitz_model_e { spitz, akita, borzoi, terrier }; |
| |
| typedef struct { |
| MachineClass parent; |
| enum spitz_model_e model; |
| int arm_id; |
| } SpitzMachineClass; |
| |
| typedef struct { |
| MachineState parent; |
| PXA2xxState *mpu; |
| DeviceState *mux; |
| DeviceState *lcdtg; |
| DeviceState *ads7846; |
| DeviceState *max1111; |
| DeviceState *scp0; |
| DeviceState *scp1; |
| DeviceState *misc_gpio; |
| } SpitzMachineState; |
| |
| #define TYPE_SPITZ_MACHINE "spitz-common" |
| #define SPITZ_MACHINE(obj) \ |
| OBJECT_CHECK(SpitzMachineState, obj, TYPE_SPITZ_MACHINE) |
| #define SPITZ_MACHINE_GET_CLASS(obj) \ |
| OBJECT_GET_CLASS(SpitzMachineClass, obj, TYPE_SPITZ_MACHINE) |
| #define SPITZ_MACHINE_CLASS(klass) \ |
| OBJECT_CLASS_CHECK(SpitzMachineClass, klass, TYPE_SPITZ_MACHINE) |
| |
| #define zaurus_printf(format, ...) \ |
| fprintf(stderr, "%s: " format, __func__, ##__VA_ARGS__) |
| |
| /* Spitz Flash */ |
| #define FLASH_BASE 0x0c000000 |
| #define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */ |
| #define FLASH_ECCLPUB 0x04 /* Line parity 15 - 8 bit */ |
| #define FLASH_ECCCP 0x08 /* Column parity 5 - 0 bit */ |
| #define FLASH_ECCCNTR 0x0c /* ECC byte counter */ |
| #define FLASH_ECCCLRR 0x10 /* Clear ECC */ |
| #define FLASH_FLASHIO 0x14 /* Flash I/O */ |
| #define FLASH_FLASHCTL 0x18 /* Flash Control */ |
| |
| #define FLASHCTL_CE0 (1 << 0) |
| #define FLASHCTL_CLE (1 << 1) |
| #define FLASHCTL_ALE (1 << 2) |
| #define FLASHCTL_WP (1 << 3) |
| #define FLASHCTL_CE1 (1 << 4) |
| #define FLASHCTL_RYBY (1 << 5) |
| #define FLASHCTL_NCE (FLASHCTL_CE0 | FLASHCTL_CE1) |
| |
| #define TYPE_SL_NAND "sl-nand" |
| #define SL_NAND(obj) OBJECT_CHECK(SLNANDState, (obj), TYPE_SL_NAND) |
| |
| typedef struct { |
| SysBusDevice parent_obj; |
| |
| MemoryRegion iomem; |
| DeviceState *nand; |
| uint8_t ctl; |
| uint8_t manf_id; |
| uint8_t chip_id; |
| ECCState ecc; |
| } SLNANDState; |
| |
| static uint64_t sl_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| SLNANDState *s = (SLNANDState *) opaque; |
| int ryby; |
| |
| switch (addr) { |
| #define BSHR(byte, from, to) ((s->ecc.lp[byte] >> (from - to)) & (1 << to)) |
| case FLASH_ECCLPLB: |
| return BSHR(0, 4, 0) | BSHR(0, 5, 2) | BSHR(0, 6, 4) | BSHR(0, 7, 6) | |
| BSHR(1, 4, 1) | BSHR(1, 5, 3) | BSHR(1, 6, 5) | BSHR(1, 7, 7); |
| |
| #define BSHL(byte, from, to) ((s->ecc.lp[byte] << (to - from)) & (1 << to)) |
| case FLASH_ECCLPUB: |
| return BSHL(0, 0, 0) | BSHL(0, 1, 2) | BSHL(0, 2, 4) | BSHL(0, 3, 6) | |
| BSHL(1, 0, 1) | BSHL(1, 1, 3) | BSHL(1, 2, 5) | BSHL(1, 3, 7); |
| |
| case FLASH_ECCCP: |
| return s->ecc.cp; |
| |
| case FLASH_ECCCNTR: |
| return s->ecc.count & 0xff; |
| |
| case FLASH_FLASHCTL: |
| nand_getpins(s->nand, &ryby); |
| if (ryby) |
| return s->ctl | FLASHCTL_RYBY; |
| else |
| return s->ctl; |
| |
| case FLASH_FLASHIO: |
| if (size == 4) { |
| return ecc_digest(&s->ecc, nand_getio(s->nand)) | |
| (ecc_digest(&s->ecc, nand_getio(s->nand)) << 16); |
| } |
| return ecc_digest(&s->ecc, nand_getio(s->nand)); |
| |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "sl_read: bad register offset 0x%02" HWADDR_PRIx "\n", |
| addr); |
| } |
| return 0; |
| } |
| |
| static void sl_write(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| SLNANDState *s = (SLNANDState *) opaque; |
| |
| switch (addr) { |
| case FLASH_ECCCLRR: |
| /* Value is ignored. */ |
| ecc_reset(&s->ecc); |
| break; |
| |
| case FLASH_FLASHCTL: |
| s->ctl = value & 0xff & ~FLASHCTL_RYBY; |
| nand_setpins(s->nand, |
| s->ctl & FLASHCTL_CLE, |
| s->ctl & FLASHCTL_ALE, |
| s->ctl & FLASHCTL_NCE, |
| s->ctl & FLASHCTL_WP, |
| 0); |
| break; |
| |
| case FLASH_FLASHIO: |
| nand_setio(s->nand, ecc_digest(&s->ecc, value & 0xff)); |
| break; |
| |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "sl_write: bad register offset 0x%02" HWADDR_PRIx "\n", |
| addr); |
| } |
| } |
| |
| enum { |
| FLASH_128M, |
| FLASH_1024M, |
| }; |
| |
| static const MemoryRegionOps sl_ops = { |
| .read = sl_read, |
| .write = sl_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void sl_flash_register(PXA2xxState *cpu, int size) |
| { |
| DeviceState *dev; |
| |
| dev = qdev_new(TYPE_SL_NAND); |
| |
| qdev_prop_set_uint8(dev, "manf_id", NAND_MFR_SAMSUNG); |
| if (size == FLASH_128M) |
| qdev_prop_set_uint8(dev, "chip_id", 0x73); |
| else if (size == FLASH_1024M) |
| qdev_prop_set_uint8(dev, "chip_id", 0xf1); |
| |
| sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, FLASH_BASE); |
| } |
| |
| static void sl_nand_init(Object *obj) |
| { |
| SLNANDState *s = SL_NAND(obj); |
| SysBusDevice *dev = SYS_BUS_DEVICE(obj); |
| |
| s->ctl = 0; |
| |
| memory_region_init_io(&s->iomem, obj, &sl_ops, s, "sl", 0x40); |
| sysbus_init_mmio(dev, &s->iomem); |
| } |
| |
| static void sl_nand_realize(DeviceState *dev, Error **errp) |
| { |
| SLNANDState *s = SL_NAND(dev); |
| DriveInfo *nand; |
| |
| /* FIXME use a qdev drive property instead of drive_get() */ |
| nand = drive_get(IF_MTD, 0, 0); |
| s->nand = nand_init(nand ? blk_by_legacy_dinfo(nand) : NULL, |
| s->manf_id, s->chip_id); |
| } |
| |
| /* Spitz Keyboard */ |
| |
| #define SPITZ_KEY_STROBE_NUM 11 |
| #define SPITZ_KEY_SENSE_NUM 7 |
| |
| static const int spitz_gpio_key_sense[SPITZ_KEY_SENSE_NUM] = { |
| 12, 17, 91, 34, 36, 38, 39 |
| }; |
| |
| static const int spitz_gpio_key_strobe[SPITZ_KEY_STROBE_NUM] = { |
| 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 |
| }; |
| |
| /* Eighth additional row maps the special keys */ |
| static int spitz_keymap[SPITZ_KEY_SENSE_NUM + 1][SPITZ_KEY_STROBE_NUM] = { |
| { 0x1d, 0x02, 0x04, 0x06, 0x07, 0x08, 0x0a, 0x0b, 0x0e, 0x3f, 0x40 }, |
| { -1 , 0x03, 0x05, 0x13, 0x15, 0x09, 0x17, 0x18, 0x19, 0x41, 0x42 }, |
| { 0x0f, 0x10, 0x12, 0x14, 0x22, 0x16, 0x24, 0x25, -1 , -1 , -1 }, |
| { 0x3c, 0x11, 0x1f, 0x21, 0x2f, 0x23, 0x32, 0x26, -1 , 0x36, -1 }, |
| { 0x3b, 0x1e, 0x20, 0x2e, 0x30, 0x31, 0x34, -1 , 0x1c, 0x2a, -1 }, |
| { 0x44, 0x2c, 0x2d, 0x0c, 0x39, 0x33, -1 , 0x48, -1 , -1 , 0x38 }, |
| { 0x37, 0x3d, -1 , 0x45, 0x57, 0x58, 0x4b, 0x50, 0x4d, -1 , -1 }, |
| { 0x52, 0x43, 0x01, 0x47, 0x49, -1 , -1 , -1 , -1 , -1 , -1 }, |
| }; |
| |
| #define SPITZ_GPIO_AK_INT 13 /* Remote control */ |
| #define SPITZ_GPIO_SYNC 16 /* Sync button */ |
| #define SPITZ_GPIO_ON_KEY 95 /* Power button */ |
| #define SPITZ_GPIO_SWA 97 /* Lid */ |
| #define SPITZ_GPIO_SWB 96 /* Tablet mode */ |
| |
| /* The special buttons are mapped to unused keys */ |
| static const int spitz_gpiomap[5] = { |
| SPITZ_GPIO_AK_INT, SPITZ_GPIO_SYNC, SPITZ_GPIO_ON_KEY, |
| SPITZ_GPIO_SWA, SPITZ_GPIO_SWB, |
| }; |
| |
| #define TYPE_SPITZ_KEYBOARD "spitz-keyboard" |
| #define SPITZ_KEYBOARD(obj) \ |
| OBJECT_CHECK(SpitzKeyboardState, (obj), TYPE_SPITZ_KEYBOARD) |
| |
| typedef struct { |
| SysBusDevice parent_obj; |
| |
| qemu_irq sense[SPITZ_KEY_SENSE_NUM]; |
| qemu_irq gpiomap[5]; |
| int keymap[0x80]; |
| uint16_t keyrow[SPITZ_KEY_SENSE_NUM]; |
| uint16_t strobe_state; |
| uint16_t sense_state; |
| |
| uint16_t pre_map[0x100]; |
| uint16_t modifiers; |
| uint16_t imodifiers; |
| uint8_t fifo[16]; |
| int fifopos, fifolen; |
| QEMUTimer *kbdtimer; |
| } SpitzKeyboardState; |
| |
| static void spitz_keyboard_sense_update(SpitzKeyboardState *s) |
| { |
| int i; |
| uint16_t strobe, sense = 0; |
| for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++) { |
| strobe = s->keyrow[i] & s->strobe_state; |
| if (strobe) { |
| sense |= 1 << i; |
| if (!(s->sense_state & (1 << i))) |
| qemu_irq_raise(s->sense[i]); |
| } else if (s->sense_state & (1 << i)) |
| qemu_irq_lower(s->sense[i]); |
| } |
| |
| s->sense_state = sense; |
| } |
| |
| static void spitz_keyboard_strobe(void *opaque, int line, int level) |
| { |
| SpitzKeyboardState *s = (SpitzKeyboardState *) opaque; |
| |
| if (level) |
| s->strobe_state |= 1 << line; |
| else |
| s->strobe_state &= ~(1 << line); |
| spitz_keyboard_sense_update(s); |
| } |
| |
| static void spitz_keyboard_keydown(SpitzKeyboardState *s, int keycode) |
| { |
| int spitz_keycode = s->keymap[keycode & 0x7f]; |
| if (spitz_keycode == -1) |
| return; |
| |
| /* Handle the additional keys */ |
| if ((spitz_keycode >> 4) == SPITZ_KEY_SENSE_NUM) { |
| qemu_set_irq(s->gpiomap[spitz_keycode & 0xf], (keycode < 0x80)); |
| return; |
| } |
| |
| if (keycode & 0x80) |
| s->keyrow[spitz_keycode >> 4] &= ~(1 << (spitz_keycode & 0xf)); |
| else |
| s->keyrow[spitz_keycode >> 4] |= 1 << (spitz_keycode & 0xf); |
| |
| spitz_keyboard_sense_update(s); |
| } |
| |
| #define SPITZ_MOD_SHIFT (1 << 7) |
| #define SPITZ_MOD_CTRL (1 << 8) |
| #define SPITZ_MOD_FN (1 << 9) |
| |
| #define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c |
| |
| static void spitz_keyboard_handler(void *opaque, int keycode) |
| { |
| SpitzKeyboardState *s = opaque; |
| uint16_t code; |
| int mapcode; |
| switch (keycode) { |
| case 0x2a: /* Left Shift */ |
| s->modifiers |= 1; |
| break; |
| case 0xaa: |
| s->modifiers &= ~1; |
| break; |
| case 0x36: /* Right Shift */ |
| s->modifiers |= 2; |
| break; |
| case 0xb6: |
| s->modifiers &= ~2; |
| break; |
| case 0x1d: /* Control */ |
| s->modifiers |= 4; |
| break; |
| case 0x9d: |
| s->modifiers &= ~4; |
| break; |
| case 0x38: /* Alt */ |
| s->modifiers |= 8; |
| break; |
| case 0xb8: |
| s->modifiers &= ~8; |
| break; |
| } |
| |
| code = s->pre_map[mapcode = ((s->modifiers & 3) ? |
| (keycode | SPITZ_MOD_SHIFT) : |
| (keycode & ~SPITZ_MOD_SHIFT))]; |
| |
| if (code != mapcode) { |
| #if 0 |
| if ((code & SPITZ_MOD_SHIFT) && !(s->modifiers & 1)) { |
| QUEUE_KEY(0x2a | (keycode & 0x80)); |
| } |
| if ((code & SPITZ_MOD_CTRL) && !(s->modifiers & 4)) { |
| QUEUE_KEY(0x1d | (keycode & 0x80)); |
| } |
| if ((code & SPITZ_MOD_FN) && !(s->modifiers & 8)) { |
| QUEUE_KEY(0x38 | (keycode & 0x80)); |
| } |
| if ((code & SPITZ_MOD_FN) && (s->modifiers & 1)) { |
| QUEUE_KEY(0x2a | (~keycode & 0x80)); |
| } |
| if ((code & SPITZ_MOD_FN) && (s->modifiers & 2)) { |
| QUEUE_KEY(0x36 | (~keycode & 0x80)); |
| } |
| #else |
| if (keycode & 0x80) { |
| if ((s->imodifiers & 1 ) && !(s->modifiers & 1)) |
| QUEUE_KEY(0x2a | 0x80); |
| if ((s->imodifiers & 4 ) && !(s->modifiers & 4)) |
| QUEUE_KEY(0x1d | 0x80); |
| if ((s->imodifiers & 8 ) && !(s->modifiers & 8)) |
| QUEUE_KEY(0x38 | 0x80); |
| if ((s->imodifiers & 0x10) && (s->modifiers & 1)) |
| QUEUE_KEY(0x2a); |
| if ((s->imodifiers & 0x20) && (s->modifiers & 2)) |
| QUEUE_KEY(0x36); |
| s->imodifiers = 0; |
| } else { |
| if ((code & SPITZ_MOD_SHIFT) && |
| !((s->modifiers | s->imodifiers) & 1)) { |
| QUEUE_KEY(0x2a); |
| s->imodifiers |= 1; |
| } |
| if ((code & SPITZ_MOD_CTRL) && |
| !((s->modifiers | s->imodifiers) & 4)) { |
| QUEUE_KEY(0x1d); |
| s->imodifiers |= 4; |
| } |
| if ((code & SPITZ_MOD_FN) && |
| !((s->modifiers | s->imodifiers) & 8)) { |
| QUEUE_KEY(0x38); |
| s->imodifiers |= 8; |
| } |
| if ((code & SPITZ_MOD_FN) && (s->modifiers & 1) && |
| !(s->imodifiers & 0x10)) { |
| QUEUE_KEY(0x2a | 0x80); |
| s->imodifiers |= 0x10; |
| } |
| if ((code & SPITZ_MOD_FN) && (s->modifiers & 2) && |
| !(s->imodifiers & 0x20)) { |
| QUEUE_KEY(0x36 | 0x80); |
| s->imodifiers |= 0x20; |
| } |
| } |
| #endif |
| } |
| |
| QUEUE_KEY((code & 0x7f) | (keycode & 0x80)); |
| } |
| |
| static void spitz_keyboard_tick(void *opaque) |
| { |
| SpitzKeyboardState *s = (SpitzKeyboardState *) opaque; |
| |
| if (s->fifolen) { |
| spitz_keyboard_keydown(s, s->fifo[s->fifopos ++]); |
| s->fifolen --; |
| if (s->fifopos >= 16) |
| s->fifopos = 0; |
| } |
| |
| timer_mod(s->kbdtimer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + |
| NANOSECONDS_PER_SECOND / 32); |
| } |
| |
| static void spitz_keyboard_pre_map(SpitzKeyboardState *s) |
| { |
| int i; |
| for (i = 0; i < 0x100; i ++) |
| s->pre_map[i] = i; |
| s->pre_map[0x02 | SPITZ_MOD_SHIFT] = 0x02 | SPITZ_MOD_SHIFT; /* exclam */ |
| s->pre_map[0x28 | SPITZ_MOD_SHIFT] = 0x03 | SPITZ_MOD_SHIFT; /* quotedbl */ |
| s->pre_map[0x04 | SPITZ_MOD_SHIFT] = 0x04 | SPITZ_MOD_SHIFT; /* # */ |
| s->pre_map[0x05 | SPITZ_MOD_SHIFT] = 0x05 | SPITZ_MOD_SHIFT; /* dollar */ |
| s->pre_map[0x06 | SPITZ_MOD_SHIFT] = 0x06 | SPITZ_MOD_SHIFT; /* percent */ |
| s->pre_map[0x08 | SPITZ_MOD_SHIFT] = 0x07 | SPITZ_MOD_SHIFT; /* ampersand */ |
| s->pre_map[0x28] = 0x08 | SPITZ_MOD_SHIFT; /* ' */ |
| s->pre_map[0x0a | SPITZ_MOD_SHIFT] = 0x09 | SPITZ_MOD_SHIFT; /* ( */ |
| s->pre_map[0x0b | SPITZ_MOD_SHIFT] = 0x0a | SPITZ_MOD_SHIFT; /* ) */ |
| s->pre_map[0x29 | SPITZ_MOD_SHIFT] = 0x0b | SPITZ_MOD_SHIFT; /* tilde */ |
| s->pre_map[0x03 | SPITZ_MOD_SHIFT] = 0x0c | SPITZ_MOD_SHIFT; /* at */ |
| s->pre_map[0xd3] = 0x0e | SPITZ_MOD_FN; /* Delete */ |
| s->pre_map[0x3a] = 0x0f | SPITZ_MOD_FN; /* Caps_Lock */ |
| s->pre_map[0x07 | SPITZ_MOD_SHIFT] = 0x11 | SPITZ_MOD_FN; /* ^ */ |
| s->pre_map[0x0d] = 0x12 | SPITZ_MOD_FN; /* equal */ |
| s->pre_map[0x0d | SPITZ_MOD_SHIFT] = 0x13 | SPITZ_MOD_FN; /* plus */ |
| s->pre_map[0x1a] = 0x14 | SPITZ_MOD_FN; /* [ */ |
| s->pre_map[0x1b] = 0x15 | SPITZ_MOD_FN; /* ] */ |
| s->pre_map[0x1a | SPITZ_MOD_SHIFT] = 0x16 | SPITZ_MOD_FN; /* { */ |
| s->pre_map[0x1b | SPITZ_MOD_SHIFT] = 0x17 | SPITZ_MOD_FN; /* } */ |
| s->pre_map[0x27] = 0x22 | SPITZ_MOD_FN; /* semicolon */ |
| s->pre_map[0x27 | SPITZ_MOD_SHIFT] = 0x23 | SPITZ_MOD_FN; /* colon */ |
| s->pre_map[0x09 | SPITZ_MOD_SHIFT] = 0x24 | SPITZ_MOD_FN; /* asterisk */ |
| s->pre_map[0x2b] = 0x25 | SPITZ_MOD_FN; /* backslash */ |
| s->pre_map[0x2b | SPITZ_MOD_SHIFT] = 0x26 | SPITZ_MOD_FN; /* bar */ |
| s->pre_map[0x0c | SPITZ_MOD_SHIFT] = 0x30 | SPITZ_MOD_FN; /* _ */ |
| s->pre_map[0x33 | SPITZ_MOD_SHIFT] = 0x33 | SPITZ_MOD_FN; /* less */ |
| s->pre_map[0x35] = 0x33 | SPITZ_MOD_SHIFT; /* slash */ |
| s->pre_map[0x34 | SPITZ_MOD_SHIFT] = 0x34 | SPITZ_MOD_FN; /* greater */ |
| s->pre_map[0x35 | SPITZ_MOD_SHIFT] = 0x34 | SPITZ_MOD_SHIFT; /* question */ |
| s->pre_map[0x49] = 0x48 | SPITZ_MOD_FN; /* Page_Up */ |
| s->pre_map[0x51] = 0x50 | SPITZ_MOD_FN; /* Page_Down */ |
| |
| s->modifiers = 0; |
| s->imodifiers = 0; |
| s->fifopos = 0; |
| s->fifolen = 0; |
| } |
| |
| #undef SPITZ_MOD_SHIFT |
| #undef SPITZ_MOD_CTRL |
| #undef SPITZ_MOD_FN |
| |
| static int spitz_keyboard_post_load(void *opaque, int version_id) |
| { |
| SpitzKeyboardState *s = (SpitzKeyboardState *) opaque; |
| |
| /* Release all pressed keys */ |
| memset(s->keyrow, 0, sizeof(s->keyrow)); |
| spitz_keyboard_sense_update(s); |
| s->modifiers = 0; |
| s->imodifiers = 0; |
| s->fifopos = 0; |
| s->fifolen = 0; |
| |
| return 0; |
| } |
| |
| static void spitz_keyboard_register(PXA2xxState *cpu) |
| { |
| int i; |
| DeviceState *dev; |
| SpitzKeyboardState *s; |
| |
| dev = sysbus_create_simple(TYPE_SPITZ_KEYBOARD, -1, NULL); |
| s = SPITZ_KEYBOARD(dev); |
| |
| for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++) |
| qdev_connect_gpio_out(dev, i, qdev_get_gpio_in(cpu->gpio, spitz_gpio_key_sense[i])); |
| |
| for (i = 0; i < 5; i ++) |
| s->gpiomap[i] = qdev_get_gpio_in(cpu->gpio, spitz_gpiomap[i]); |
| |
| if (!graphic_rotate) |
| s->gpiomap[4] = qemu_irq_invert(s->gpiomap[4]); |
| |
| for (i = 0; i < 5; i++) |
| qemu_set_irq(s->gpiomap[i], 0); |
| |
| for (i = 0; i < SPITZ_KEY_STROBE_NUM; i ++) |
| qdev_connect_gpio_out(cpu->gpio, spitz_gpio_key_strobe[i], |
| qdev_get_gpio_in(dev, i)); |
| |
| timer_mod(s->kbdtimer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)); |
| |
| qemu_add_kbd_event_handler(spitz_keyboard_handler, s); |
| } |
| |
| static void spitz_keyboard_init(Object *obj) |
| { |
| DeviceState *dev = DEVICE(obj); |
| SpitzKeyboardState *s = SPITZ_KEYBOARD(obj); |
| int i, j; |
| |
| for (i = 0; i < 0x80; i ++) |
| s->keymap[i] = -1; |
| for (i = 0; i < SPITZ_KEY_SENSE_NUM + 1; i ++) |
| for (j = 0; j < SPITZ_KEY_STROBE_NUM; j ++) |
| if (spitz_keymap[i][j] != -1) |
| s->keymap[spitz_keymap[i][j]] = (i << 4) | j; |
| |
| spitz_keyboard_pre_map(s); |
| |
| qdev_init_gpio_in(dev, spitz_keyboard_strobe, SPITZ_KEY_STROBE_NUM); |
| qdev_init_gpio_out(dev, s->sense, SPITZ_KEY_SENSE_NUM); |
| } |
| |
| static void spitz_keyboard_realize(DeviceState *dev, Error **errp) |
| { |
| SpitzKeyboardState *s = SPITZ_KEYBOARD(dev); |
| s->kbdtimer = timer_new_ns(QEMU_CLOCK_VIRTUAL, spitz_keyboard_tick, s); |
| } |
| |
| /* LCD backlight controller */ |
| |
| #define LCDTG_RESCTL 0x00 |
| #define LCDTG_PHACTRL 0x01 |
| #define LCDTG_DUTYCTRL 0x02 |
| #define LCDTG_POWERREG0 0x03 |
| #define LCDTG_POWERREG1 0x04 |
| #define LCDTG_GPOR3 0x05 |
| #define LCDTG_PICTRL 0x06 |
| #define LCDTG_POLCTRL 0x07 |
| |
| #define TYPE_SPITZ_LCDTG "spitz-lcdtg" |
| #define SPITZ_LCDTG(obj) OBJECT_CHECK(SpitzLCDTG, (obj), TYPE_SPITZ_LCDTG) |
| |
| typedef struct { |
| SSISlave ssidev; |
| uint32_t bl_intensity; |
| uint32_t bl_power; |
| } SpitzLCDTG; |
| |
| static void spitz_bl_update(SpitzLCDTG *s) |
| { |
| if (s->bl_power && s->bl_intensity) |
| zaurus_printf("LCD Backlight now at %i/63\n", s->bl_intensity); |
| else |
| zaurus_printf("LCD Backlight now off\n"); |
| } |
| |
| static inline void spitz_bl_bit5(void *opaque, int line, int level) |
| { |
| SpitzLCDTG *s = opaque; |
| int prev = s->bl_intensity; |
| |
| if (level) |
| s->bl_intensity &= ~0x20; |
| else |
| s->bl_intensity |= 0x20; |
| |
| if (s->bl_power && prev != s->bl_intensity) |
| spitz_bl_update(s); |
| } |
| |
| static inline void spitz_bl_power(void *opaque, int line, int level) |
| { |
| SpitzLCDTG *s = opaque; |
| s->bl_power = !!level; |
| spitz_bl_update(s); |
| } |
| |
| static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value) |
| { |
| SpitzLCDTG *s = SPITZ_LCDTG(dev); |
| int addr; |
| addr = value >> 5; |
| value &= 0x1f; |
| |
| switch (addr) { |
| case LCDTG_RESCTL: |
| if (value) |
| zaurus_printf("LCD in QVGA mode\n"); |
| else |
| zaurus_printf("LCD in VGA mode\n"); |
| break; |
| |
| case LCDTG_DUTYCTRL: |
| s->bl_intensity &= ~0x1f; |
| s->bl_intensity |= value; |
| if (s->bl_power) |
| spitz_bl_update(s); |
| break; |
| |
| case LCDTG_POWERREG0: |
| /* Set common voltage to M62332FP */ |
| break; |
| } |
| return 0; |
| } |
| |
| static void spitz_lcdtg_realize(SSISlave *ssi, Error **errp) |
| { |
| SpitzLCDTG *s = SPITZ_LCDTG(ssi); |
| DeviceState *dev = DEVICE(s); |
| |
| s->bl_power = 0; |
| s->bl_intensity = 0x20; |
| |
| qdev_init_gpio_in_named(dev, spitz_bl_bit5, "bl_bit5", 1); |
| qdev_init_gpio_in_named(dev, spitz_bl_power, "bl_power", 1); |
| } |
| |
| /* SSP devices */ |
| |
| #define CORGI_SSP_PORT 2 |
| |
| #define SPITZ_GPIO_LCDCON_CS 53 |
| #define SPITZ_GPIO_ADS7846_CS 14 |
| #define SPITZ_GPIO_MAX1111_CS 20 |
| #define SPITZ_GPIO_TP_INT 11 |
| |
| #define TYPE_CORGI_SSP "corgi-ssp" |
| #define CORGI_SSP(obj) OBJECT_CHECK(CorgiSSPState, (obj), TYPE_CORGI_SSP) |
| |
| /* "Demux" the signal based on current chipselect */ |
| typedef struct { |
| SSISlave ssidev; |
| SSIBus *bus[3]; |
| uint32_t enable[3]; |
| } CorgiSSPState; |
| |
| static uint32_t corgi_ssp_transfer(SSISlave *dev, uint32_t value) |
| { |
| CorgiSSPState *s = CORGI_SSP(dev); |
| int i; |
| |
| for (i = 0; i < 3; i++) { |
| if (s->enable[i]) { |
| return ssi_transfer(s->bus[i], value); |
| } |
| } |
| return 0; |
| } |
| |
| static void corgi_ssp_gpio_cs(void *opaque, int line, int level) |
| { |
| CorgiSSPState *s = (CorgiSSPState *)opaque; |
| assert(line >= 0 && line < 3); |
| s->enable[line] = !level; |
| } |
| |
| #define MAX1111_BATT_VOLT 1 |
| #define MAX1111_BATT_TEMP 2 |
| #define MAX1111_ACIN_VOLT 3 |
| |
| #define SPITZ_BATTERY_TEMP 0xe0 /* About 2.9V */ |
| #define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */ |
| #define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */ |
| |
| static void corgi_ssp_realize(SSISlave *d, Error **errp) |
| { |
| DeviceState *dev = DEVICE(d); |
| CorgiSSPState *s = CORGI_SSP(d); |
| |
| qdev_init_gpio_in(dev, corgi_ssp_gpio_cs, 3); |
| s->bus[0] = ssi_create_bus(dev, "ssi0"); |
| s->bus[1] = ssi_create_bus(dev, "ssi1"); |
| s->bus[2] = ssi_create_bus(dev, "ssi2"); |
| } |
| |
| static void spitz_ssp_attach(SpitzMachineState *sms) |
| { |
| void *bus; |
| |
| sms->mux = ssi_create_slave(sms->mpu->ssp[CORGI_SSP_PORT - 1], |
| TYPE_CORGI_SSP); |
| |
| bus = qdev_get_child_bus(sms->mux, "ssi0"); |
| sms->lcdtg = ssi_create_slave(bus, TYPE_SPITZ_LCDTG); |
| |
| bus = qdev_get_child_bus(sms->mux, "ssi1"); |
| sms->ads7846 = ssi_create_slave(bus, "ads7846"); |
| qdev_connect_gpio_out(sms->ads7846, 0, |
| qdev_get_gpio_in(sms->mpu->gpio, SPITZ_GPIO_TP_INT)); |
| |
| bus = qdev_get_child_bus(sms->mux, "ssi2"); |
| sms->max1111 = qdev_new(TYPE_MAX_1111); |
| qdev_prop_set_uint8(sms->max1111, "input1" /* BATT_VOLT */, |
| SPITZ_BATTERY_VOLT); |
| qdev_prop_set_uint8(sms->max1111, "input2" /* BATT_TEMP */, 0); |
| qdev_prop_set_uint8(sms->max1111, "input3" /* ACIN_VOLT */, |
| SPITZ_CHARGEON_ACIN); |
| ssi_realize_and_unref(sms->max1111, bus, &error_fatal); |
| |
| qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_LCDCON_CS, |
| qdev_get_gpio_in(sms->mux, 0)); |
| qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_ADS7846_CS, |
| qdev_get_gpio_in(sms->mux, 1)); |
| qdev_connect_gpio_out(sms->mpu->gpio, SPITZ_GPIO_MAX1111_CS, |
| qdev_get_gpio_in(sms->mux, 2)); |
| } |
| |
| /* CF Microdrive */ |
| |
| static void spitz_microdrive_attach(PXA2xxState *cpu, int slot) |
| { |
| PCMCIACardState *md; |
| DriveInfo *dinfo; |
| |
| dinfo = drive_get(IF_IDE, 0, 0); |
| if (!dinfo || dinfo->media_cd) |
| return; |
| md = dscm1xxxx_init(dinfo); |
| pxa2xx_pcmcia_attach(cpu->pcmcia[slot], md); |
| } |
| |
| /* Wm8750 and Max7310 on I2C */ |
| |
| #define AKITA_MAX_ADDR 0x18 |
| #define SPITZ_WM_ADDRL 0x1b |
| #define SPITZ_WM_ADDRH 0x1a |
| |
| #define SPITZ_GPIO_WM 5 |
| |
| static void spitz_wm8750_addr(void *opaque, int line, int level) |
| { |
| I2CSlave *wm = (I2CSlave *) opaque; |
| if (level) |
| i2c_set_slave_address(wm, SPITZ_WM_ADDRH); |
| else |
| i2c_set_slave_address(wm, SPITZ_WM_ADDRL); |
| } |
| |
| static void spitz_i2c_setup(PXA2xxState *cpu) |
| { |
| /* Attach the CPU on one end of our I2C bus. */ |
| I2CBus *bus = pxa2xx_i2c_bus(cpu->i2c[0]); |
| |
| DeviceState *wm; |
| |
| /* Attach a WM8750 to the bus */ |
| wm = DEVICE(i2c_slave_create_simple(bus, TYPE_WM8750, 0)); |
| |
| spitz_wm8750_addr(wm, 0, 0); |
| qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_WM, |
| qemu_allocate_irq(spitz_wm8750_addr, wm, 0)); |
| /* .. and to the sound interface. */ |
| cpu->i2s->opaque = wm; |
| cpu->i2s->codec_out = wm8750_dac_dat; |
| cpu->i2s->codec_in = wm8750_adc_dat; |
| wm8750_data_req_set(wm, cpu->i2s->data_req, cpu->i2s); |
| } |
| |
| static void spitz_akita_i2c_setup(PXA2xxState *cpu) |
| { |
| /* Attach a Max7310 to Akita I2C bus. */ |
| i2c_slave_create_simple(pxa2xx_i2c_bus(cpu->i2c[0]), "max7310", |
| AKITA_MAX_ADDR); |
| } |
| |
| /* Other peripherals */ |
| |
| /* |
| * Encapsulation of some miscellaneous GPIO line behaviour for the Spitz boards. |
| * |
| * QEMU interface: |
| * + named GPIO inputs "green-led", "orange-led", "charging", "discharging": |
| * these currently just print messages that the line has been signalled |
| * + named GPIO input "adc-temp-on": set to cause the battery-temperature |
| * value to be passed to the max111x ADC |
| * + named GPIO output "adc-temp": the ADC value, to be wired up to the max111x |
| */ |
| #define TYPE_SPITZ_MISC_GPIO "spitz-misc-gpio" |
| #define SPITZ_MISC_GPIO(obj) \ |
| OBJECT_CHECK(SpitzMiscGPIOState, (obj), TYPE_SPITZ_MISC_GPIO) |
| |
| typedef struct SpitzMiscGPIOState { |
| SysBusDevice parent_obj; |
| |
| qemu_irq adc_value; |
| } SpitzMiscGPIOState; |
| |
| static void spitz_misc_charging(void *opaque, int n, int level) |
| { |
| zaurus_printf("Charging %s.\n", level ? "off" : "on"); |
| } |
| |
| static void spitz_misc_discharging(void *opaque, int n, int level) |
| { |
| zaurus_printf("Discharging %s.\n", level ? "off" : "on"); |
| } |
| |
| static void spitz_misc_green_led(void *opaque, int n, int level) |
| { |
| zaurus_printf("Green LED %s.\n", level ? "off" : "on"); |
| } |
| |
| static void spitz_misc_orange_led(void *opaque, int n, int level) |
| { |
| zaurus_printf("Orange LED %s.\n", level ? "off" : "on"); |
| } |
| |
| static void spitz_misc_adc_temp(void *opaque, int n, int level) |
| { |
| SpitzMiscGPIOState *s = SPITZ_MISC_GPIO(opaque); |
| int batt_temp = level ? SPITZ_BATTERY_TEMP : 0; |
| |
| qemu_set_irq(s->adc_value, batt_temp); |
| } |
| |
| static void spitz_misc_gpio_init(Object *obj) |
| { |
| SpitzMiscGPIOState *s = SPITZ_MISC_GPIO(obj); |
| DeviceState *dev = DEVICE(obj); |
| |
| qdev_init_gpio_in_named(dev, spitz_misc_charging, "charging", 1); |
| qdev_init_gpio_in_named(dev, spitz_misc_discharging, "discharging", 1); |
| qdev_init_gpio_in_named(dev, spitz_misc_green_led, "green-led", 1); |
| qdev_init_gpio_in_named(dev, spitz_misc_orange_led, "orange-led", 1); |
| qdev_init_gpio_in_named(dev, spitz_misc_adc_temp, "adc-temp-on", 1); |
| |
| qdev_init_gpio_out_named(dev, &s->adc_value, "adc-temp", 1); |
| } |
| |
| #define SPITZ_SCP_LED_GREEN 1 |
| #define SPITZ_SCP_JK_B 2 |
| #define SPITZ_SCP_CHRG_ON 3 |
| #define SPITZ_SCP_MUTE_L 4 |
| #define SPITZ_SCP_MUTE_R 5 |
| #define SPITZ_SCP_CF_POWER 6 |
| #define SPITZ_SCP_LED_ORANGE 7 |
| #define SPITZ_SCP_JK_A 8 |
| #define SPITZ_SCP_ADC_TEMP_ON 9 |
| #define SPITZ_SCP2_IR_ON 1 |
| #define SPITZ_SCP2_AKIN_PULLUP 2 |
| #define SPITZ_SCP2_BACKLIGHT_CONT 7 |
| #define SPITZ_SCP2_BACKLIGHT_ON 8 |
| #define SPITZ_SCP2_MIC_BIAS 9 |
| |
| static void spitz_scoop_gpio_setup(SpitzMachineState *sms) |
| { |
| DeviceState *miscdev = sysbus_create_simple(TYPE_SPITZ_MISC_GPIO, -1, NULL); |
| |
| sms->misc_gpio = miscdev; |
| |
| qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_CHRG_ON, |
| qdev_get_gpio_in_named(miscdev, "charging", 0)); |
| qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_JK_B, |
| qdev_get_gpio_in_named(miscdev, "discharging", 0)); |
| qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_GREEN, |
| qdev_get_gpio_in_named(miscdev, "green-led", 0)); |
| qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_LED_ORANGE, |
| qdev_get_gpio_in_named(miscdev, "orange-led", 0)); |
| qdev_connect_gpio_out(sms->scp0, SPITZ_SCP_ADC_TEMP_ON, |
| qdev_get_gpio_in_named(miscdev, "adc-temp-on", 0)); |
| qdev_connect_gpio_out_named(miscdev, "adc-temp", 0, |
| qdev_get_gpio_in(sms->max1111, MAX1111_BATT_TEMP)); |
| |
| if (sms->scp1) { |
| qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_CONT, |
| qdev_get_gpio_in_named(sms->lcdtg, "bl_bit5", 0)); |
| qdev_connect_gpio_out(sms->scp1, SPITZ_SCP2_BACKLIGHT_ON, |
| qdev_get_gpio_in_named(sms->lcdtg, "bl_power", 0)); |
| } |
| } |
| |
| #define SPITZ_GPIO_HSYNC 22 |
| #define SPITZ_GPIO_SD_DETECT 9 |
| #define SPITZ_GPIO_SD_WP 81 |
| #define SPITZ_GPIO_ON_RESET 89 |
| #define SPITZ_GPIO_BAT_COVER 90 |
| #define SPITZ_GPIO_CF1_IRQ 105 |
| #define SPITZ_GPIO_CF1_CD 94 |
| #define SPITZ_GPIO_CF2_IRQ 106 |
| #define SPITZ_GPIO_CF2_CD 93 |
| |
| static int spitz_hsync; |
| |
| static void spitz_lcd_hsync_handler(void *opaque, int line, int level) |
| { |
| PXA2xxState *cpu = (PXA2xxState *) opaque; |
| qemu_set_irq(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_HSYNC), spitz_hsync); |
| spitz_hsync ^= 1; |
| } |
| |
| static void spitz_reset(void *opaque, int line, int level) |
| { |
| if (level) { |
| qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); |
| } |
| } |
| |
| static void spitz_gpio_setup(PXA2xxState *cpu, int slots) |
| { |
| qemu_irq lcd_hsync; |
| qemu_irq reset; |
| |
| /* |
| * Bad hack: We toggle the LCD hsync GPIO on every GPIO status |
| * read to satisfy broken guests that poll-wait for hsync. |
| * Simulating a real hsync event would be less practical and |
| * wouldn't guarantee that a guest ever exits the loop. |
| */ |
| spitz_hsync = 0; |
| lcd_hsync = qemu_allocate_irq(spitz_lcd_hsync_handler, cpu, 0); |
| pxa2xx_gpio_read_notifier(cpu->gpio, lcd_hsync); |
| pxa2xx_lcd_vsync_notifier(cpu->lcd, lcd_hsync); |
| |
| /* MMC/SD host */ |
| pxa2xx_mmci_handlers(cpu->mmc, |
| qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_SD_WP), |
| qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_SD_DETECT)); |
| |
| /* Battery lock always closed */ |
| qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_BAT_COVER)); |
| |
| /* Handle reset */ |
| reset = qemu_allocate_irq(spitz_reset, cpu, 0); |
| qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ON_RESET, reset); |
| |
| /* PCMCIA signals: card's IRQ and Card-Detect */ |
| if (slots >= 1) |
| pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0], |
| qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF1_IRQ), |
| qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF1_CD)); |
| if (slots >= 2) |
| pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1], |
| qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF2_IRQ), |
| qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF2_CD)); |
| } |
| |
| /* Board init. */ |
| #define SPITZ_RAM 0x04000000 |
| #define SPITZ_ROM 0x00800000 |
| |
| static struct arm_boot_info spitz_binfo = { |
| .loader_start = PXA2XX_SDRAM_BASE, |
| .ram_size = 0x04000000, |
| }; |
| |
| static void spitz_common_init(MachineState *machine) |
| { |
| SpitzMachineClass *smc = SPITZ_MACHINE_GET_CLASS(machine); |
| SpitzMachineState *sms = SPITZ_MACHINE(machine); |
| enum spitz_model_e model = smc->model; |
| PXA2xxState *mpu; |
| MemoryRegion *address_space_mem = get_system_memory(); |
| MemoryRegion *rom = g_new(MemoryRegion, 1); |
| |
| /* Setup CPU & memory */ |
| mpu = pxa270_init(address_space_mem, spitz_binfo.ram_size, |
| machine->cpu_type); |
| sms->mpu = mpu; |
| |
| sl_flash_register(mpu, (model == spitz) ? FLASH_128M : FLASH_1024M); |
| |
| memory_region_init_rom(rom, NULL, "spitz.rom", SPITZ_ROM, &error_fatal); |
| memory_region_add_subregion(address_space_mem, 0, rom); |
| |
| /* Setup peripherals */ |
| spitz_keyboard_register(mpu); |
| |
| spitz_ssp_attach(sms); |
| |
| sms->scp0 = sysbus_create_simple("scoop", 0x10800000, NULL); |
| if (model != akita) { |
| sms->scp1 = sysbus_create_simple("scoop", 0x08800040, NULL); |
| } else { |
| sms->scp1 = NULL; |
| } |
| |
| spitz_scoop_gpio_setup(sms); |
| |
| spitz_gpio_setup(mpu, (model == akita) ? 1 : 2); |
| |
| spitz_i2c_setup(mpu); |
| |
| if (model == akita) |
| spitz_akita_i2c_setup(mpu); |
| |
| if (model == terrier) |
| /* A 6.0 GB microdrive is permanently sitting in CF slot 1. */ |
| spitz_microdrive_attach(mpu, 1); |
| else if (model != akita) |
| /* A 4.0 GB microdrive is permanently sitting in CF slot 0. */ |
| spitz_microdrive_attach(mpu, 0); |
| |
| spitz_binfo.board_id = smc->arm_id; |
| arm_load_kernel(mpu->cpu, machine, &spitz_binfo); |
| sl_bootparam_write(SL_PXA_PARAM_BASE); |
| } |
| |
| static void spitz_common_class_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| |
| mc->block_default_type = IF_IDE; |
| mc->ignore_memory_transaction_failures = true; |
| mc->init = spitz_common_init; |
| } |
| |
| static const TypeInfo spitz_common_info = { |
| .name = TYPE_SPITZ_MACHINE, |
| .parent = TYPE_MACHINE, |
| .abstract = true, |
| .instance_size = sizeof(SpitzMachineState), |
| .class_size = sizeof(SpitzMachineClass), |
| .class_init = spitz_common_class_init, |
| }; |
| |
| static void akitapda_class_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); |
| |
| mc->desc = "Sharp SL-C1000 (Akita) PDA (PXA270)"; |
| mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); |
| smc->model = akita; |
| smc->arm_id = 0x2e8; |
| } |
| |
| static const TypeInfo akitapda_type = { |
| .name = MACHINE_TYPE_NAME("akita"), |
| .parent = TYPE_SPITZ_MACHINE, |
| .class_init = akitapda_class_init, |
| }; |
| |
| static void spitzpda_class_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); |
| |
| mc->desc = "Sharp SL-C3000 (Spitz) PDA (PXA270)"; |
| mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); |
| smc->model = spitz; |
| smc->arm_id = 0x2c9; |
| } |
| |
| static const TypeInfo spitzpda_type = { |
| .name = MACHINE_TYPE_NAME("spitz"), |
| .parent = TYPE_SPITZ_MACHINE, |
| .class_init = spitzpda_class_init, |
| }; |
| |
| static void borzoipda_class_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); |
| |
| mc->desc = "Sharp SL-C3100 (Borzoi) PDA (PXA270)"; |
| mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0"); |
| smc->model = borzoi; |
| smc->arm_id = 0x33f; |
| } |
| |
| static const TypeInfo borzoipda_type = { |
| .name = MACHINE_TYPE_NAME("borzoi"), |
| .parent = TYPE_SPITZ_MACHINE, |
| .class_init = borzoipda_class_init, |
| }; |
| |
| static void terrierpda_class_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| SpitzMachineClass *smc = SPITZ_MACHINE_CLASS(oc); |
| |
| mc->desc = "Sharp SL-C3200 (Terrier) PDA (PXA270)"; |
| mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c5"); |
| smc->model = terrier; |
| smc->arm_id = 0x33f; |
| } |
| |
| static const TypeInfo terrierpda_type = { |
| .name = MACHINE_TYPE_NAME("terrier"), |
| .parent = TYPE_SPITZ_MACHINE, |
| .class_init = terrierpda_class_init, |
| }; |
| |
| static void spitz_machine_init(void) |
| { |
| type_register_static(&spitz_common_info); |
| type_register_static(&akitapda_type); |
| type_register_static(&spitzpda_type); |
| type_register_static(&borzoipda_type); |
| type_register_static(&terrierpda_type); |
| } |
| |
| type_init(spitz_machine_init) |
| |
| static bool is_version_0(void *opaque, int version_id) |
| { |
| return version_id == 0; |
| } |
| |
| static VMStateDescription vmstate_sl_nand_info = { |
| .name = "sl-nand", |
| .version_id = 0, |
| .minimum_version_id = 0, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT8(ctl, SLNANDState), |
| VMSTATE_STRUCT(ecc, SLNANDState, 0, vmstate_ecc_state, ECCState), |
| VMSTATE_END_OF_LIST(), |
| }, |
| }; |
| |
| static Property sl_nand_properties[] = { |
| DEFINE_PROP_UINT8("manf_id", SLNANDState, manf_id, NAND_MFR_SAMSUNG), |
| DEFINE_PROP_UINT8("chip_id", SLNANDState, chip_id, 0xf1), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void sl_nand_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->vmsd = &vmstate_sl_nand_info; |
| device_class_set_props(dc, sl_nand_properties); |
| dc->realize = sl_nand_realize; |
| /* Reason: init() method uses drive_get() */ |
| dc->user_creatable = false; |
| } |
| |
| static const TypeInfo sl_nand_info = { |
| .name = TYPE_SL_NAND, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(SLNANDState), |
| .instance_init = sl_nand_init, |
| .class_init = sl_nand_class_init, |
| }; |
| |
| static VMStateDescription vmstate_spitz_kbd = { |
| .name = "spitz-keyboard", |
| .version_id = 1, |
| .minimum_version_id = 0, |
| .post_load = spitz_keyboard_post_load, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT16(sense_state, SpitzKeyboardState), |
| VMSTATE_UINT16(strobe_state, SpitzKeyboardState), |
| VMSTATE_UNUSED_TEST(is_version_0, 5), |
| VMSTATE_END_OF_LIST(), |
| }, |
| }; |
| |
| static void spitz_keyboard_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->vmsd = &vmstate_spitz_kbd; |
| dc->realize = spitz_keyboard_realize; |
| } |
| |
| static const TypeInfo spitz_keyboard_info = { |
| .name = TYPE_SPITZ_KEYBOARD, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(SpitzKeyboardState), |
| .instance_init = spitz_keyboard_init, |
| .class_init = spitz_keyboard_class_init, |
| }; |
| |
| static const VMStateDescription vmstate_corgi_ssp_regs = { |
| .name = "corgi-ssp", |
| .version_id = 2, |
| .minimum_version_id = 2, |
| .fields = (VMStateField[]) { |
| VMSTATE_SSI_SLAVE(ssidev, CorgiSSPState), |
| VMSTATE_UINT32_ARRAY(enable, CorgiSSPState, 3), |
| VMSTATE_END_OF_LIST(), |
| } |
| }; |
| |
| static void corgi_ssp_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| SSISlaveClass *k = SSI_SLAVE_CLASS(klass); |
| |
| k->realize = corgi_ssp_realize; |
| k->transfer = corgi_ssp_transfer; |
| dc->vmsd = &vmstate_corgi_ssp_regs; |
| } |
| |
| static const TypeInfo corgi_ssp_info = { |
| .name = TYPE_CORGI_SSP, |
| .parent = TYPE_SSI_SLAVE, |
| .instance_size = sizeof(CorgiSSPState), |
| .class_init = corgi_ssp_class_init, |
| }; |
| |
| static const VMStateDescription vmstate_spitz_lcdtg_regs = { |
| .name = "spitz-lcdtg", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_SSI_SLAVE(ssidev, SpitzLCDTG), |
| VMSTATE_UINT32(bl_intensity, SpitzLCDTG), |
| VMSTATE_UINT32(bl_power, SpitzLCDTG), |
| VMSTATE_END_OF_LIST(), |
| } |
| }; |
| |
| static void spitz_lcdtg_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| SSISlaveClass *k = SSI_SLAVE_CLASS(klass); |
| |
| k->realize = spitz_lcdtg_realize; |
| k->transfer = spitz_lcdtg_transfer; |
| dc->vmsd = &vmstate_spitz_lcdtg_regs; |
| } |
| |
| static const TypeInfo spitz_lcdtg_info = { |
| .name = TYPE_SPITZ_LCDTG, |
| .parent = TYPE_SSI_SLAVE, |
| .instance_size = sizeof(SpitzLCDTG), |
| .class_init = spitz_lcdtg_class_init, |
| }; |
| |
| static const TypeInfo spitz_misc_gpio_info = { |
| .name = TYPE_SPITZ_MISC_GPIO, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(SpitzMiscGPIOState), |
| .instance_init = spitz_misc_gpio_init, |
| /* |
| * No class_init required: device has no internal state so does not |
| * need to set up reset or vmstate, and does not have a realize method. |
| */ |
| }; |
| |
| static void spitz_register_types(void) |
| { |
| type_register_static(&corgi_ssp_info); |
| type_register_static(&spitz_lcdtg_info); |
| type_register_static(&spitz_keyboard_info); |
| type_register_static(&sl_nand_info); |
| type_register_static(&spitz_misc_gpio_info); |
| } |
| |
| type_init(spitz_register_types) |