| /* |
| * QEMU PC System Emulator |
| * |
| * Copyright (c) 2003-2004 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/units.h" |
| #include "hw/i386/pc.h" |
| #include "hw/char/serial.h" |
| #include "hw/char/parallel.h" |
| #include "hw/hyperv/hv-balloon.h" |
| #include "hw/i386/fw_cfg.h" |
| #include "hw/i386/vmport.h" |
| #include "sysemu/cpus.h" |
| #include "hw/ide/ide-bus.h" |
| #include "hw/timer/hpet.h" |
| #include "hw/loader.h" |
| #include "hw/rtc/mc146818rtc.h" |
| #include "hw/intc/i8259.h" |
| #include "hw/timer/i8254.h" |
| #include "hw/input/i8042.h" |
| #include "hw/audio/pcspk.h" |
| #include "sysemu/sysemu.h" |
| #include "sysemu/xen.h" |
| #include "sysemu/reset.h" |
| #include "kvm/kvm_i386.h" |
| #include "hw/xen/xen.h" |
| #include "qapi/qmp/qlist.h" |
| #include "qemu/error-report.h" |
| #include "hw/acpi/cpu_hotplug.h" |
| #include "acpi-build.h" |
| #include "hw/mem/nvdimm.h" |
| #include "hw/cxl/cxl_host.h" |
| #include "hw/usb.h" |
| #include "hw/i386/intel_iommu.h" |
| #include "hw/net/ne2000-isa.h" |
| #include "hw/virtio/virtio-iommu.h" |
| #include "hw/virtio/virtio-md-pci.h" |
| #include "hw/i386/kvm/xen_overlay.h" |
| #include "hw/i386/kvm/xen_evtchn.h" |
| #include "hw/i386/kvm/xen_gnttab.h" |
| #include "hw/i386/kvm/xen_xenstore.h" |
| #include "hw/mem/memory-device.h" |
| #include "e820_memory_layout.h" |
| #include "trace.h" |
| #include "sev.h" |
| #include CONFIG_DEVICES |
| |
| #ifdef CONFIG_XEN_EMU |
| #include "hw/xen/xen-legacy-backend.h" |
| #include "hw/xen/xen-bus.h" |
| #endif |
| |
| /* |
| * Helper for setting model-id for CPU models that changed model-id |
| * depending on QEMU versions up to QEMU 2.4. |
| */ |
| #define PC_CPU_MODEL_IDS(v) \ |
| { "qemu32-" TYPE_X86_CPU, "model-id", "QEMU Virtual CPU version " v, },\ |
| { "qemu64-" TYPE_X86_CPU, "model-id", "QEMU Virtual CPU version " v, },\ |
| { "athlon-" TYPE_X86_CPU, "model-id", "QEMU Virtual CPU version " v, }, |
| |
| GlobalProperty pc_compat_9_0[] = { |
| { TYPE_X86_CPU, "x-amd-topoext-features-only", "false" }, |
| { TYPE_X86_CPU, "x-l1-cache-per-thread", "false" }, |
| { TYPE_X86_CPU, "guest-phys-bits", "0" }, |
| { "sev-guest", "legacy-vm-type", "on" }, |
| { TYPE_X86_CPU, "legacy-multi-node", "on" }, |
| }; |
| const size_t pc_compat_9_0_len = G_N_ELEMENTS(pc_compat_9_0); |
| |
| GlobalProperty pc_compat_8_2[] = {}; |
| const size_t pc_compat_8_2_len = G_N_ELEMENTS(pc_compat_8_2); |
| |
| GlobalProperty pc_compat_8_1[] = {}; |
| const size_t pc_compat_8_1_len = G_N_ELEMENTS(pc_compat_8_1); |
| |
| GlobalProperty pc_compat_8_0[] = { |
| { "virtio-mem", "unplugged-inaccessible", "auto" }, |
| }; |
| const size_t pc_compat_8_0_len = G_N_ELEMENTS(pc_compat_8_0); |
| |
| GlobalProperty pc_compat_7_2[] = { |
| { "ICH9-LPC", "noreboot", "true" }, |
| }; |
| const size_t pc_compat_7_2_len = G_N_ELEMENTS(pc_compat_7_2); |
| |
| GlobalProperty pc_compat_7_1[] = {}; |
| const size_t pc_compat_7_1_len = G_N_ELEMENTS(pc_compat_7_1); |
| |
| GlobalProperty pc_compat_7_0[] = {}; |
| const size_t pc_compat_7_0_len = G_N_ELEMENTS(pc_compat_7_0); |
| |
| GlobalProperty pc_compat_6_2[] = { |
| { "virtio-mem", "unplugged-inaccessible", "off" }, |
| }; |
| const size_t pc_compat_6_2_len = G_N_ELEMENTS(pc_compat_6_2); |
| |
| GlobalProperty pc_compat_6_1[] = { |
| { TYPE_X86_CPU, "hv-version-id-build", "0x1bbc" }, |
| { TYPE_X86_CPU, "hv-version-id-major", "0x0006" }, |
| { TYPE_X86_CPU, "hv-version-id-minor", "0x0001" }, |
| { "ICH9-LPC", "x-keep-pci-slot-hpc", "false" }, |
| }; |
| const size_t pc_compat_6_1_len = G_N_ELEMENTS(pc_compat_6_1); |
| |
| GlobalProperty pc_compat_6_0[] = { |
| { "qemu64" "-" TYPE_X86_CPU, "family", "6" }, |
| { "qemu64" "-" TYPE_X86_CPU, "model", "6" }, |
| { "qemu64" "-" TYPE_X86_CPU, "stepping", "3" }, |
| { TYPE_X86_CPU, "x-vendor-cpuid-only", "off" }, |
| { "ICH9-LPC", ACPI_PM_PROP_ACPI_PCIHP_BRIDGE, "off" }, |
| { "ICH9-LPC", "x-keep-pci-slot-hpc", "true" }, |
| }; |
| const size_t pc_compat_6_0_len = G_N_ELEMENTS(pc_compat_6_0); |
| |
| GlobalProperty pc_compat_5_2[] = { |
| { "ICH9-LPC", "x-smi-cpu-hotunplug", "off" }, |
| }; |
| const size_t pc_compat_5_2_len = G_N_ELEMENTS(pc_compat_5_2); |
| |
| GlobalProperty pc_compat_5_1[] = { |
| { "ICH9-LPC", "x-smi-cpu-hotplug", "off" }, |
| { TYPE_X86_CPU, "kvm-msi-ext-dest-id", "off" }, |
| }; |
| const size_t pc_compat_5_1_len = G_N_ELEMENTS(pc_compat_5_1); |
| |
| GlobalProperty pc_compat_5_0[] = { |
| }; |
| const size_t pc_compat_5_0_len = G_N_ELEMENTS(pc_compat_5_0); |
| |
| GlobalProperty pc_compat_4_2[] = { |
| { "mch", "smbase-smram", "off" }, |
| }; |
| const size_t pc_compat_4_2_len = G_N_ELEMENTS(pc_compat_4_2); |
| |
| GlobalProperty pc_compat_4_1[] = {}; |
| const size_t pc_compat_4_1_len = G_N_ELEMENTS(pc_compat_4_1); |
| |
| GlobalProperty pc_compat_4_0[] = {}; |
| const size_t pc_compat_4_0_len = G_N_ELEMENTS(pc_compat_4_0); |
| |
| GlobalProperty pc_compat_3_1[] = { |
| { "intel-iommu", "dma-drain", "off" }, |
| { "Opteron_G3" "-" TYPE_X86_CPU, "rdtscp", "off" }, |
| { "Opteron_G4" "-" TYPE_X86_CPU, "rdtscp", "off" }, |
| { "Opteron_G4" "-" TYPE_X86_CPU, "npt", "off" }, |
| { "Opteron_G4" "-" TYPE_X86_CPU, "nrip-save", "off" }, |
| { "Opteron_G5" "-" TYPE_X86_CPU, "rdtscp", "off" }, |
| { "Opteron_G5" "-" TYPE_X86_CPU, "npt", "off" }, |
| { "Opteron_G5" "-" TYPE_X86_CPU, "nrip-save", "off" }, |
| { "EPYC" "-" TYPE_X86_CPU, "npt", "off" }, |
| { "EPYC" "-" TYPE_X86_CPU, "nrip-save", "off" }, |
| { "EPYC-IBPB" "-" TYPE_X86_CPU, "npt", "off" }, |
| { "EPYC-IBPB" "-" TYPE_X86_CPU, "nrip-save", "off" }, |
| { "Skylake-Client" "-" TYPE_X86_CPU, "mpx", "on" }, |
| { "Skylake-Client-IBRS" "-" TYPE_X86_CPU, "mpx", "on" }, |
| { "Skylake-Server" "-" TYPE_X86_CPU, "mpx", "on" }, |
| { "Skylake-Server-IBRS" "-" TYPE_X86_CPU, "mpx", "on" }, |
| { "Cascadelake-Server" "-" TYPE_X86_CPU, "mpx", "on" }, |
| { "Icelake-Client" "-" TYPE_X86_CPU, "mpx", "on" }, |
| { "Icelake-Server" "-" TYPE_X86_CPU, "mpx", "on" }, |
| { "Cascadelake-Server" "-" TYPE_X86_CPU, "stepping", "5" }, |
| { TYPE_X86_CPU, "x-intel-pt-auto-level", "off" }, |
| }; |
| const size_t pc_compat_3_1_len = G_N_ELEMENTS(pc_compat_3_1); |
| |
| GlobalProperty pc_compat_3_0[] = { |
| { TYPE_X86_CPU, "x-hv-synic-kvm-only", "on" }, |
| { "Skylake-Server" "-" TYPE_X86_CPU, "pku", "off" }, |
| { "Skylake-Server-IBRS" "-" TYPE_X86_CPU, "pku", "off" }, |
| }; |
| const size_t pc_compat_3_0_len = G_N_ELEMENTS(pc_compat_3_0); |
| |
| GlobalProperty pc_compat_2_12[] = { |
| { TYPE_X86_CPU, "legacy-cache", "on" }, |
| { TYPE_X86_CPU, "topoext", "off" }, |
| { "EPYC-" TYPE_X86_CPU, "xlevel", "0x8000000a" }, |
| { "EPYC-IBPB-" TYPE_X86_CPU, "xlevel", "0x8000000a" }, |
| }; |
| const size_t pc_compat_2_12_len = G_N_ELEMENTS(pc_compat_2_12); |
| |
| GlobalProperty pc_compat_2_11[] = { |
| { TYPE_X86_CPU, "x-migrate-smi-count", "off" }, |
| { "Skylake-Server" "-" TYPE_X86_CPU, "clflushopt", "off" }, |
| }; |
| const size_t pc_compat_2_11_len = G_N_ELEMENTS(pc_compat_2_11); |
| |
| GlobalProperty pc_compat_2_10[] = { |
| { TYPE_X86_CPU, "x-hv-max-vps", "0x40" }, |
| { "i440FX-pcihost", "x-pci-hole64-fix", "off" }, |
| { "q35-pcihost", "x-pci-hole64-fix", "off" }, |
| }; |
| const size_t pc_compat_2_10_len = G_N_ELEMENTS(pc_compat_2_10); |
| |
| GlobalProperty pc_compat_2_9[] = { |
| { "mch", "extended-tseg-mbytes", "0" }, |
| }; |
| const size_t pc_compat_2_9_len = G_N_ELEMENTS(pc_compat_2_9); |
| |
| GlobalProperty pc_compat_2_8[] = { |
| { TYPE_X86_CPU, "tcg-cpuid", "off" }, |
| { "kvmclock", "x-mach-use-reliable-get-clock", "off" }, |
| { "ICH9-LPC", "x-smi-broadcast", "off" }, |
| { TYPE_X86_CPU, "vmware-cpuid-freq", "off" }, |
| { "Haswell-" TYPE_X86_CPU, "stepping", "1" }, |
| }; |
| const size_t pc_compat_2_8_len = G_N_ELEMENTS(pc_compat_2_8); |
| |
| GlobalProperty pc_compat_2_7[] = { |
| { TYPE_X86_CPU, "l3-cache", "off" }, |
| { TYPE_X86_CPU, "full-cpuid-auto-level", "off" }, |
| { "Opteron_G3" "-" TYPE_X86_CPU, "family", "15" }, |
| { "Opteron_G3" "-" TYPE_X86_CPU, "model", "6" }, |
| { "Opteron_G3" "-" TYPE_X86_CPU, "stepping", "1" }, |
| { "isa-pcspk", "migrate", "off" }, |
| }; |
| const size_t pc_compat_2_7_len = G_N_ELEMENTS(pc_compat_2_7); |
| |
| GlobalProperty pc_compat_2_6[] = { |
| { TYPE_X86_CPU, "cpuid-0xb", "off" }, |
| { "vmxnet3", "romfile", "" }, |
| { TYPE_X86_CPU, "fill-mtrr-mask", "off" }, |
| { "apic-common", "legacy-instance-id", "on", } |
| }; |
| const size_t pc_compat_2_6_len = G_N_ELEMENTS(pc_compat_2_6); |
| |
| GlobalProperty pc_compat_2_5[] = {}; |
| const size_t pc_compat_2_5_len = G_N_ELEMENTS(pc_compat_2_5); |
| |
| GlobalProperty pc_compat_2_4[] = { |
| PC_CPU_MODEL_IDS("2.4.0") |
| { "Haswell-" TYPE_X86_CPU, "abm", "off" }, |
| { "Haswell-noTSX-" TYPE_X86_CPU, "abm", "off" }, |
| { "Broadwell-" TYPE_X86_CPU, "abm", "off" }, |
| { "Broadwell-noTSX-" TYPE_X86_CPU, "abm", "off" }, |
| { "host" "-" TYPE_X86_CPU, "host-cache-info", "on" }, |
| { TYPE_X86_CPU, "check", "off" }, |
| { "qemu64" "-" TYPE_X86_CPU, "sse4a", "on" }, |
| { "qemu64" "-" TYPE_X86_CPU, "abm", "on" }, |
| { "qemu64" "-" TYPE_X86_CPU, "popcnt", "on" }, |
| { "qemu32" "-" TYPE_X86_CPU, "popcnt", "on" }, |
| { "Opteron_G2" "-" TYPE_X86_CPU, "rdtscp", "on" }, |
| { "Opteron_G3" "-" TYPE_X86_CPU, "rdtscp", "on" }, |
| { "Opteron_G4" "-" TYPE_X86_CPU, "rdtscp", "on" }, |
| { "Opteron_G5" "-" TYPE_X86_CPU, "rdtscp", "on", } |
| }; |
| const size_t pc_compat_2_4_len = G_N_ELEMENTS(pc_compat_2_4); |
| |
| /* |
| * @PC_FW_DATA: |
| * Size of the chunk of memory at the top of RAM for the BIOS ACPI tables |
| * and other BIOS datastructures. |
| * |
| * BIOS ACPI tables: 128K. Other BIOS datastructures: less than 4K |
| * reported to be used at the moment, 32K should be enough for a while. |
| */ |
| #define PC_FW_DATA (0x20000 + 0x8000) |
| |
| GSIState *pc_gsi_create(qemu_irq **irqs, bool pci_enabled) |
| { |
| GSIState *s; |
| |
| s = g_new0(GSIState, 1); |
| if (kvm_ioapic_in_kernel()) { |
| kvm_pc_setup_irq_routing(pci_enabled); |
| } |
| *irqs = qemu_allocate_irqs(gsi_handler, s, IOAPIC_NUM_PINS); |
| |
| return s; |
| } |
| |
| static void ioport80_write(void *opaque, hwaddr addr, uint64_t data, |
| unsigned size) |
| { |
| } |
| |
| static uint64_t ioport80_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| return 0xffffffffffffffffULL; |
| } |
| |
| /* MS-DOS compatibility mode FPU exception support */ |
| static void ioportF0_write(void *opaque, hwaddr addr, uint64_t data, |
| unsigned size) |
| { |
| if (tcg_enabled()) { |
| cpu_set_ignne(); |
| } |
| } |
| |
| static uint64_t ioportF0_read(void *opaque, hwaddr addr, unsigned size) |
| { |
| return 0xffffffffffffffffULL; |
| } |
| |
| /* PC cmos mappings */ |
| |
| #define REG_EQUIPMENT_BYTE 0x14 |
| |
| static void cmos_init_hd(MC146818RtcState *s, int type_ofs, int info_ofs, |
| int16_t cylinders, int8_t heads, int8_t sectors) |
| { |
| mc146818rtc_set_cmos_data(s, type_ofs, 47); |
| mc146818rtc_set_cmos_data(s, info_ofs, cylinders); |
| mc146818rtc_set_cmos_data(s, info_ofs + 1, cylinders >> 8); |
| mc146818rtc_set_cmos_data(s, info_ofs + 2, heads); |
| mc146818rtc_set_cmos_data(s, info_ofs + 3, 0xff); |
| mc146818rtc_set_cmos_data(s, info_ofs + 4, 0xff); |
| mc146818rtc_set_cmos_data(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3)); |
| mc146818rtc_set_cmos_data(s, info_ofs + 6, cylinders); |
| mc146818rtc_set_cmos_data(s, info_ofs + 7, cylinders >> 8); |
| mc146818rtc_set_cmos_data(s, info_ofs + 8, sectors); |
| } |
| |
| /* convert boot_device letter to something recognizable by the bios */ |
| static int boot_device2nibble(char boot_device) |
| { |
| switch(boot_device) { |
| case 'a': |
| case 'b': |
| return 0x01; /* floppy boot */ |
| case 'c': |
| return 0x02; /* hard drive boot */ |
| case 'd': |
| return 0x03; /* CD-ROM boot */ |
| case 'n': |
| return 0x04; /* Network boot */ |
| } |
| return 0; |
| } |
| |
| static void set_boot_dev(PCMachineState *pcms, MC146818RtcState *s, |
| const char *boot_device, Error **errp) |
| { |
| #define PC_MAX_BOOT_DEVICES 3 |
| int nbds, bds[3] = { 0, }; |
| int i; |
| |
| nbds = strlen(boot_device); |
| if (nbds > PC_MAX_BOOT_DEVICES) { |
| error_setg(errp, "Too many boot devices for PC"); |
| return; |
| } |
| for (i = 0; i < nbds; i++) { |
| bds[i] = boot_device2nibble(boot_device[i]); |
| if (bds[i] == 0) { |
| error_setg(errp, "Invalid boot device for PC: '%c'", |
| boot_device[i]); |
| return; |
| } |
| } |
| mc146818rtc_set_cmos_data(s, 0x3d, (bds[1] << 4) | bds[0]); |
| mc146818rtc_set_cmos_data(s, 0x38, (bds[2] << 4) | !pcms->fd_bootchk); |
| } |
| |
| static void pc_boot_set(void *opaque, const char *boot_device, Error **errp) |
| { |
| PCMachineState *pcms = opaque; |
| X86MachineState *x86ms = X86_MACHINE(pcms); |
| |
| set_boot_dev(pcms, MC146818_RTC(x86ms->rtc), boot_device, errp); |
| } |
| |
| static void pc_cmos_init_floppy(MC146818RtcState *rtc_state, ISADevice *floppy) |
| { |
| int val, nb; |
| FloppyDriveType fd_type[2] = { FLOPPY_DRIVE_TYPE_NONE, |
| FLOPPY_DRIVE_TYPE_NONE }; |
| |
| #ifdef CONFIG_FDC_ISA |
| /* floppy type */ |
| if (floppy) { |
| for (int i = 0; i < 2; i++) { |
| fd_type[i] = isa_fdc_get_drive_type(floppy, i); |
| } |
| } |
| #endif |
| |
| val = (cmos_get_fd_drive_type(fd_type[0]) << 4) | |
| cmos_get_fd_drive_type(fd_type[1]); |
| mc146818rtc_set_cmos_data(rtc_state, 0x10, val); |
| |
| val = mc146818rtc_get_cmos_data(rtc_state, REG_EQUIPMENT_BYTE); |
| nb = 0; |
| if (fd_type[0] != FLOPPY_DRIVE_TYPE_NONE) { |
| nb++; |
| } |
| if (fd_type[1] != FLOPPY_DRIVE_TYPE_NONE) { |
| nb++; |
| } |
| switch (nb) { |
| case 0: |
| break; |
| case 1: |
| val |= 0x01; /* 1 drive, ready for boot */ |
| break; |
| case 2: |
| val |= 0x41; /* 2 drives, ready for boot */ |
| break; |
| } |
| mc146818rtc_set_cmos_data(rtc_state, REG_EQUIPMENT_BYTE, val); |
| } |
| |
| typedef struct check_fdc_state { |
| ISADevice *floppy; |
| bool multiple; |
| } CheckFdcState; |
| |
| static int check_fdc(Object *obj, void *opaque) |
| { |
| CheckFdcState *state = opaque; |
| Object *fdc; |
| uint32_t iobase; |
| Error *local_err = NULL; |
| |
| fdc = object_dynamic_cast(obj, TYPE_ISA_FDC); |
| if (!fdc) { |
| return 0; |
| } |
| |
| iobase = object_property_get_uint(obj, "iobase", &local_err); |
| if (local_err || iobase != 0x3f0) { |
| error_free(local_err); |
| return 0; |
| } |
| |
| if (state->floppy) { |
| state->multiple = true; |
| } else { |
| state->floppy = ISA_DEVICE(obj); |
| } |
| return 0; |
| } |
| |
| static const char * const fdc_container_path[] = { |
| "/unattached", "/peripheral", "/peripheral-anon" |
| }; |
| |
| /* |
| * Locate the FDC at IO address 0x3f0, in order to configure the CMOS registers |
| * and ACPI objects. |
| */ |
| static ISADevice *pc_find_fdc0(void) |
| { |
| int i; |
| Object *container; |
| CheckFdcState state = { 0 }; |
| |
| for (i = 0; i < ARRAY_SIZE(fdc_container_path); i++) { |
| container = container_get(qdev_get_machine(), fdc_container_path[i]); |
| object_child_foreach(container, check_fdc, &state); |
| } |
| |
| if (state.multiple) { |
| warn_report("multiple floppy disk controllers with " |
| "iobase=0x3f0 have been found"); |
| error_printf("the one being picked for CMOS setup might not reflect " |
| "your intent"); |
| } |
| |
| return state.floppy; |
| } |
| |
| static void pc_cmos_init_late(PCMachineState *pcms) |
| { |
| X86MachineState *x86ms = X86_MACHINE(pcms); |
| MC146818RtcState *s = MC146818_RTC(x86ms->rtc); |
| int16_t cylinders; |
| int8_t heads, sectors; |
| int val; |
| int i, trans; |
| |
| val = 0; |
| if (pcms->idebus[0] && |
| ide_get_geometry(pcms->idebus[0], 0, |
| &cylinders, &heads, §ors) >= 0) { |
| cmos_init_hd(s, 0x19, 0x1b, cylinders, heads, sectors); |
| val |= 0xf0; |
| } |
| if (pcms->idebus[0] && |
| ide_get_geometry(pcms->idebus[0], 1, |
| &cylinders, &heads, §ors) >= 0) { |
| cmos_init_hd(s, 0x1a, 0x24, cylinders, heads, sectors); |
| val |= 0x0f; |
| } |
| mc146818rtc_set_cmos_data(s, 0x12, val); |
| |
| val = 0; |
| for (i = 0; i < 4; i++) { |
| /* NOTE: ide_get_geometry() returns the physical |
| geometry. It is always such that: 1 <= sects <= 63, 1 |
| <= heads <= 16, 1 <= cylinders <= 16383. The BIOS |
| geometry can be different if a translation is done. */ |
| BusState *idebus = pcms->idebus[i / 2]; |
| if (idebus && |
| ide_get_geometry(idebus, i % 2, |
| &cylinders, &heads, §ors) >= 0) { |
| trans = ide_get_bios_chs_trans(idebus, i % 2) - 1; |
| assert((trans & ~3) == 0); |
| val |= trans << (i * 2); |
| } |
| } |
| mc146818rtc_set_cmos_data(s, 0x39, val); |
| |
| pc_cmos_init_floppy(s, pc_find_fdc0()); |
| |
| /* various important CMOS locations needed by PC/Bochs bios */ |
| |
| /* memory size */ |
| /* base memory (first MiB) */ |
| val = MIN(x86ms->below_4g_mem_size / KiB, 640); |
| mc146818rtc_set_cmos_data(s, 0x15, val); |
| mc146818rtc_set_cmos_data(s, 0x16, val >> 8); |
| /* extended memory (next 64MiB) */ |
| if (x86ms->below_4g_mem_size > 1 * MiB) { |
| val = (x86ms->below_4g_mem_size - 1 * MiB) / KiB; |
| } else { |
| val = 0; |
| } |
| if (val > 65535) |
| val = 65535; |
| mc146818rtc_set_cmos_data(s, 0x17, val); |
| mc146818rtc_set_cmos_data(s, 0x18, val >> 8); |
| mc146818rtc_set_cmos_data(s, 0x30, val); |
| mc146818rtc_set_cmos_data(s, 0x31, val >> 8); |
| /* memory between 16MiB and 4GiB */ |
| if (x86ms->below_4g_mem_size > 16 * MiB) { |
| val = (x86ms->below_4g_mem_size - 16 * MiB) / (64 * KiB); |
| } else { |
| val = 0; |
| } |
| if (val > 65535) |
| val = 65535; |
| mc146818rtc_set_cmos_data(s, 0x34, val); |
| mc146818rtc_set_cmos_data(s, 0x35, val >> 8); |
| /* memory above 4GiB */ |
| val = x86ms->above_4g_mem_size / 65536; |
| mc146818rtc_set_cmos_data(s, 0x5b, val); |
| mc146818rtc_set_cmos_data(s, 0x5c, val >> 8); |
| mc146818rtc_set_cmos_data(s, 0x5d, val >> 16); |
| |
| val = 0; |
| val |= 0x02; /* FPU is there */ |
| val |= 0x04; /* PS/2 mouse installed */ |
| mc146818rtc_set_cmos_data(s, REG_EQUIPMENT_BYTE, val); |
| } |
| |
| static void handle_a20_line_change(void *opaque, int irq, int level) |
| { |
| X86CPU *cpu = opaque; |
| |
| /* XXX: send to all CPUs ? */ |
| /* XXX: add logic to handle multiple A20 line sources */ |
| x86_cpu_set_a20(cpu, level); |
| } |
| |
| #define NE2000_NB_MAX 6 |
| |
| static const int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, |
| 0x280, 0x380 }; |
| static const int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 }; |
| |
| static gboolean pc_init_ne2k_isa(ISABus *bus, NICInfo *nd, Error **errp) |
| { |
| static int nb_ne2k = 0; |
| |
| if (nb_ne2k == NE2000_NB_MAX) { |
| error_setg(errp, |
| "maximum number of ISA NE2000 devices exceeded"); |
| return false; |
| } |
| isa_ne2000_init(bus, ne2000_io[nb_ne2k], |
| ne2000_irq[nb_ne2k], nd); |
| nb_ne2k++; |
| return true; |
| } |
| |
| void pc_acpi_smi_interrupt(void *opaque, int irq, int level) |
| { |
| X86CPU *cpu = opaque; |
| |
| if (level) { |
| cpu_interrupt(CPU(cpu), CPU_INTERRUPT_SMI); |
| } |
| } |
| |
| static |
| void pc_machine_done(Notifier *notifier, void *data) |
| { |
| PCMachineState *pcms = container_of(notifier, |
| PCMachineState, machine_done); |
| X86MachineState *x86ms = X86_MACHINE(pcms); |
| |
| cxl_hook_up_pxb_registers(pcms->pcibus, &pcms->cxl_devices_state, |
| &error_fatal); |
| |
| if (pcms->cxl_devices_state.is_enabled) { |
| cxl_fmws_link_targets(&pcms->cxl_devices_state, &error_fatal); |
| } |
| |
| /* set the number of CPUs */ |
| x86_rtc_set_cpus_count(x86ms->rtc, x86ms->boot_cpus); |
| |
| fw_cfg_add_extra_pci_roots(pcms->pcibus, x86ms->fw_cfg); |
| |
| acpi_setup(); |
| if (x86ms->fw_cfg) { |
| fw_cfg_build_smbios(pcms, x86ms->fw_cfg, pcms->smbios_entry_point_type); |
| fw_cfg_add_e820(x86ms->fw_cfg); |
| fw_cfg_build_feature_control(MACHINE(pcms), x86ms->fw_cfg); |
| /* update FW_CFG_NB_CPUS to account for -device added CPUs */ |
| fw_cfg_modify_i16(x86ms->fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus); |
| } |
| |
| pc_cmos_init_late(pcms); |
| } |
| |
| /* setup pci memory address space mapping into system address space */ |
| void pc_pci_as_mapping_init(MemoryRegion *system_memory, |
| MemoryRegion *pci_address_space) |
| { |
| /* Set to lower priority than RAM */ |
| memory_region_add_subregion_overlap(system_memory, 0x0, |
| pci_address_space, -1); |
| } |
| |
| void xen_load_linux(PCMachineState *pcms) |
| { |
| int i; |
| FWCfgState *fw_cfg; |
| PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); |
| X86MachineState *x86ms = X86_MACHINE(pcms); |
| |
| assert(MACHINE(pcms)->kernel_filename != NULL); |
| |
| fw_cfg = fw_cfg_init_io_dma(FW_CFG_IO_BASE, FW_CFG_IO_BASE + 4, |
| &address_space_memory); |
| fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, x86ms->boot_cpus); |
| rom_set_fw(fw_cfg); |
| |
| x86_load_linux(x86ms, fw_cfg, PC_FW_DATA, pcmc->pvh_enabled); |
| for (i = 0; i < nb_option_roms; i++) { |
| assert(!strcmp(option_rom[i].name, "linuxboot.bin") || |
| !strcmp(option_rom[i].name, "linuxboot_dma.bin") || |
| !strcmp(option_rom[i].name, "pvh.bin") || |
| !strcmp(option_rom[i].name, "multiboot.bin") || |
| !strcmp(option_rom[i].name, "multiboot_dma.bin")); |
| rom_add_option(option_rom[i].name, option_rom[i].bootindex); |
| } |
| x86ms->fw_cfg = fw_cfg; |
| } |
| |
| #define PC_ROM_MIN_VGA 0xc0000 |
| #define PC_ROM_MIN_OPTION 0xc8000 |
| #define PC_ROM_MAX 0xe0000 |
| #define PC_ROM_ALIGN 0x800 |
| #define PC_ROM_SIZE (PC_ROM_MAX - PC_ROM_MIN_VGA) |
| |
| static hwaddr pc_above_4g_end(PCMachineState *pcms) |
| { |
| X86MachineState *x86ms = X86_MACHINE(pcms); |
| |
| if (pcms->sgx_epc.size != 0) { |
| return sgx_epc_above_4g_end(&pcms->sgx_epc); |
| } |
| |
| return x86ms->above_4g_mem_start + x86ms->above_4g_mem_size; |
| } |
| |
| static void pc_get_device_memory_range(PCMachineState *pcms, |
| hwaddr *base, |
| ram_addr_t *device_mem_size) |
| { |
| MachineState *machine = MACHINE(pcms); |
| ram_addr_t size; |
| hwaddr addr; |
| |
| size = machine->maxram_size - machine->ram_size; |
| addr = ROUND_UP(pc_above_4g_end(pcms), 1 * GiB); |
| |
| /* size device region assuming 1G page max alignment per slot */ |
| size += (1 * GiB) * machine->ram_slots; |
| |
| *base = addr; |
| *device_mem_size = size; |
| } |
| |
| static uint64_t pc_get_cxl_range_start(PCMachineState *pcms) |
| { |
| PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); |
| MachineState *ms = MACHINE(pcms); |
| hwaddr cxl_base; |
| ram_addr_t size; |
| |
| if (pcmc->has_reserved_memory && |
| (ms->ram_size < ms->maxram_size)) { |
| pc_get_device_memory_range(pcms, &cxl_base, &size); |
| cxl_base += size; |
| } else { |
| cxl_base = pc_above_4g_end(pcms); |
| } |
| |
| return cxl_base; |
| } |
| |
| static uint64_t pc_get_cxl_range_end(PCMachineState *pcms) |
| { |
| uint64_t start = pc_get_cxl_range_start(pcms) + MiB; |
| |
| if (pcms->cxl_devices_state.fixed_windows) { |
| GList *it; |
| |
| start = ROUND_UP(start, 256 * MiB); |
| for (it = pcms->cxl_devices_state.fixed_windows; it; it = it->next) { |
| CXLFixedWindow *fw = it->data; |
| start += fw->size; |
| } |
| } |
| |
| return start; |
| } |
| |
| static hwaddr pc_max_used_gpa(PCMachineState *pcms, uint64_t pci_hole64_size) |
| { |
| X86CPU *cpu = X86_CPU(first_cpu); |
| PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); |
| MachineState *ms = MACHINE(pcms); |
| |
| if (cpu->env.features[FEAT_8000_0001_EDX] & CPUID_EXT2_LM) { |
| /* 64-bit systems */ |
| return pc_pci_hole64_start() + pci_hole64_size - 1; |
| } |
| |
| /* 32-bit systems */ |
| if (pcmc->broken_32bit_mem_addr_check) { |
| /* old value for compatibility reasons */ |
| return ((hwaddr)1 << cpu->phys_bits) - 1; |
| } |
| |
| /* |
| * 32-bit systems don't have hole64 but they might have a region for |
| * memory devices. Even if additional hotplugged memory devices might |
| * not be usable by most guest OSes, we need to still consider them for |
| * calculating the highest possible GPA so that we can properly report |
| * if someone configures them on a CPU that cannot possibly address them. |
| */ |
| if (pcmc->has_reserved_memory && |
| (ms->ram_size < ms->maxram_size)) { |
| hwaddr devmem_start; |
| ram_addr_t devmem_size; |
| |
| pc_get_device_memory_range(pcms, &devmem_start, &devmem_size); |
| devmem_start += devmem_size; |
| return devmem_start - 1; |
| } |
| |
| /* configuration without any memory hotplug */ |
| return pc_above_4g_end(pcms) - 1; |
| } |
| |
| /* |
| * AMD systems with an IOMMU have an additional hole close to the |
| * 1Tb, which are special GPAs that cannot be DMA mapped. Depending |
| * on kernel version, VFIO may or may not let you DMA map those ranges. |
| * Starting Linux v5.4 we validate it, and can't create guests on AMD machines |
| * with certain memory sizes. It's also wrong to use those IOVA ranges |
| * in detriment of leading to IOMMU INVALID_DEVICE_REQUEST or worse. |
| * The ranges reserved for Hyper-Transport are: |
| * |
| * FD_0000_0000h - FF_FFFF_FFFFh |
| * |
| * The ranges represent the following: |
| * |
| * Base Address Top Address Use |
| * |
| * FD_0000_0000h FD_F7FF_FFFFh Reserved interrupt address space |
| * FD_F800_0000h FD_F8FF_FFFFh Interrupt/EOI IntCtl |
| * FD_F900_0000h FD_F90F_FFFFh Legacy PIC IACK |
| * FD_F910_0000h FD_F91F_FFFFh System Management |
| * FD_F920_0000h FD_FAFF_FFFFh Reserved Page Tables |
| * FD_FB00_0000h FD_FBFF_FFFFh Address Translation |
| * FD_FC00_0000h FD_FDFF_FFFFh I/O Space |
| * FD_FE00_0000h FD_FFFF_FFFFh Configuration |
| * FE_0000_0000h FE_1FFF_FFFFh Extended Configuration/Device Messages |
| * FE_2000_0000h FF_FFFF_FFFFh Reserved |
| * |
| * See AMD IOMMU spec, section 2.1.2 "IOMMU Logical Topology", |
| * Table 3: Special Address Controls (GPA) for more information. |
| */ |
| #define AMD_HT_START 0xfd00000000UL |
| #define AMD_HT_END 0xffffffffffUL |
| #define AMD_ABOVE_1TB_START (AMD_HT_END + 1) |
| #define AMD_HT_SIZE (AMD_ABOVE_1TB_START - AMD_HT_START) |
| |
| void pc_memory_init(PCMachineState *pcms, |
| MemoryRegion *system_memory, |
| MemoryRegion *rom_memory, |
| uint64_t pci_hole64_size) |
| { |
| int linux_boot, i; |
| MemoryRegion *option_rom_mr; |
| MemoryRegion *ram_below_4g, *ram_above_4g; |
| FWCfgState *fw_cfg; |
| MachineState *machine = MACHINE(pcms); |
| MachineClass *mc = MACHINE_GET_CLASS(machine); |
| PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); |
| X86MachineState *x86ms = X86_MACHINE(pcms); |
| hwaddr maxphysaddr, maxusedaddr; |
| hwaddr cxl_base, cxl_resv_end = 0; |
| X86CPU *cpu = X86_CPU(first_cpu); |
| |
| assert(machine->ram_size == x86ms->below_4g_mem_size + |
| x86ms->above_4g_mem_size); |
| |
| linux_boot = (machine->kernel_filename != NULL); |
| |
| /* |
| * The HyperTransport range close to the 1T boundary is unique to AMD |
| * hosts with IOMMUs enabled. Restrict the ram-above-4g relocation |
| * to above 1T to AMD vCPUs only. @enforce_amd_1tb_hole is only false in |
| * older machine types (<= 7.0) for compatibility purposes. |
| */ |
| if (IS_AMD_CPU(&cpu->env) && pcmc->enforce_amd_1tb_hole) { |
| /* Bail out if max possible address does not cross HT range */ |
| if (pc_max_used_gpa(pcms, pci_hole64_size) >= AMD_HT_START) { |
| x86ms->above_4g_mem_start = AMD_ABOVE_1TB_START; |
| } |
| |
| /* |
| * Advertise the HT region if address space covers the reserved |
| * region or if we relocate. |
| */ |
| if (cpu->phys_bits >= 40) { |
| e820_add_entry(AMD_HT_START, AMD_HT_SIZE, E820_RESERVED); |
| } |
| } |
| |
| /* |
| * phys-bits is required to be appropriately configured |
| * to make sure max used GPA is reachable. |
| */ |
| maxusedaddr = pc_max_used_gpa(pcms, pci_hole64_size); |
| maxphysaddr = ((hwaddr)1 << cpu->phys_bits) - 1; |
| if (maxphysaddr < maxusedaddr) { |
| error_report("Address space limit 0x%"PRIx64" < 0x%"PRIx64 |
| " phys-bits too low (%u)", |
| maxphysaddr, maxusedaddr, cpu->phys_bits); |
| exit(EXIT_FAILURE); |
| } |
| |
| /* |
| * Split single memory region and use aliases to address portions of it, |
| * done for backwards compatibility with older qemus. |
| */ |
| ram_below_4g = g_malloc(sizeof(*ram_below_4g)); |
| memory_region_init_alias(ram_below_4g, NULL, "ram-below-4g", machine->ram, |
| 0, x86ms->below_4g_mem_size); |
| memory_region_add_subregion(system_memory, 0, ram_below_4g); |
| e820_add_entry(0, x86ms->below_4g_mem_size, E820_RAM); |
| if (x86ms->above_4g_mem_size > 0) { |
| ram_above_4g = g_malloc(sizeof(*ram_above_4g)); |
| memory_region_init_alias(ram_above_4g, NULL, "ram-above-4g", |
| machine->ram, |
| x86ms->below_4g_mem_size, |
| x86ms->above_4g_mem_size); |
| memory_region_add_subregion(system_memory, x86ms->above_4g_mem_start, |
| ram_above_4g); |
| e820_add_entry(x86ms->above_4g_mem_start, x86ms->above_4g_mem_size, |
| E820_RAM); |
| } |
| |
| if (pcms->sgx_epc.size != 0) { |
| e820_add_entry(pcms->sgx_epc.base, pcms->sgx_epc.size, E820_RESERVED); |
| } |
| |
| if (!pcmc->has_reserved_memory && |
| (machine->ram_slots || |
| (machine->maxram_size > machine->ram_size))) { |
| |
| error_report("\"-memory 'slots|maxmem'\" is not supported by: %s", |
| mc->name); |
| exit(EXIT_FAILURE); |
| } |
| |
| /* initialize device memory address space */ |
| if (pcmc->has_reserved_memory && |
| (machine->ram_size < machine->maxram_size)) { |
| ram_addr_t device_mem_size; |
| hwaddr device_mem_base; |
| |
| if (machine->ram_slots > ACPI_MAX_RAM_SLOTS) { |
| error_report("unsupported amount of memory slots: %"PRIu64, |
| machine->ram_slots); |
| exit(EXIT_FAILURE); |
| } |
| |
| if (QEMU_ALIGN_UP(machine->maxram_size, |
| TARGET_PAGE_SIZE) != machine->maxram_size) { |
| error_report("maximum memory size must by aligned to multiple of " |
| "%d bytes", TARGET_PAGE_SIZE); |
| exit(EXIT_FAILURE); |
| } |
| |
| pc_get_device_memory_range(pcms, &device_mem_base, &device_mem_size); |
| |
| if (device_mem_base + device_mem_size < device_mem_size) { |
| error_report("unsupported amount of maximum memory: " RAM_ADDR_FMT, |
| machine->maxram_size); |
| exit(EXIT_FAILURE); |
| } |
| machine_memory_devices_init(machine, device_mem_base, device_mem_size); |
| } |
| |
| if (pcms->cxl_devices_state.is_enabled) { |
| MemoryRegion *mr = &pcms->cxl_devices_state.host_mr; |
| hwaddr cxl_size = MiB; |
| |
| cxl_base = pc_get_cxl_range_start(pcms); |
| memory_region_init(mr, OBJECT(machine), "cxl_host_reg", cxl_size); |
| memory_region_add_subregion(system_memory, cxl_base, mr); |
| cxl_resv_end = cxl_base + cxl_size; |
| if (pcms->cxl_devices_state.fixed_windows) { |
| hwaddr cxl_fmw_base; |
| GList *it; |
| |
| cxl_fmw_base = ROUND_UP(cxl_base + cxl_size, 256 * MiB); |
| for (it = pcms->cxl_devices_state.fixed_windows; it; it = it->next) { |
| CXLFixedWindow *fw = it->data; |
| |
| fw->base = cxl_fmw_base; |
| memory_region_init_io(&fw->mr, OBJECT(machine), &cfmws_ops, fw, |
| "cxl-fixed-memory-region", fw->size); |
| memory_region_add_subregion(system_memory, fw->base, &fw->mr); |
| cxl_fmw_base += fw->size; |
| cxl_resv_end = cxl_fmw_base; |
| } |
| } |
| } |
| |
| /* Initialize PC system firmware */ |
| pc_system_firmware_init(pcms, rom_memory); |
| |
| option_rom_mr = g_malloc(sizeof(*option_rom_mr)); |
| if (machine_require_guest_memfd(machine)) { |
| memory_region_init_ram_guest_memfd(option_rom_mr, NULL, "pc.rom", |
| PC_ROM_SIZE, &error_fatal); |
| } else { |
| memory_region_init_ram(option_rom_mr, NULL, "pc.rom", PC_ROM_SIZE, |
| &error_fatal); |
| if (pcmc->pci_enabled) { |
| memory_region_set_readonly(option_rom_mr, true); |
| } |
| } |
| memory_region_add_subregion_overlap(rom_memory, |
| PC_ROM_MIN_VGA, |
| option_rom_mr, |
| 1); |
| |
| fw_cfg = fw_cfg_arch_create(machine, |
| x86ms->boot_cpus, x86ms->apic_id_limit); |
| |
| rom_set_fw(fw_cfg); |
| |
| if (machine->device_memory) { |
| uint64_t *val = g_malloc(sizeof(*val)); |
| uint64_t res_mem_end = machine->device_memory->base; |
| |
| if (!pcmc->broken_reserved_end) { |
| res_mem_end += memory_region_size(&machine->device_memory->mr); |
| } |
| |
| if (pcms->cxl_devices_state.is_enabled) { |
| res_mem_end = cxl_resv_end; |
| } |
| *val = cpu_to_le64(ROUND_UP(res_mem_end, 1 * GiB)); |
| fw_cfg_add_file(fw_cfg, "etc/reserved-memory-end", val, sizeof(*val)); |
| } |
| |
| if (linux_boot) { |
| x86_load_linux(x86ms, fw_cfg, PC_FW_DATA, pcmc->pvh_enabled); |
| } |
| |
| for (i = 0; i < nb_option_roms; i++) { |
| rom_add_option(option_rom[i].name, option_rom[i].bootindex); |
| } |
| x86ms->fw_cfg = fw_cfg; |
| |
| /* Init default IOAPIC address space */ |
| x86ms->ioapic_as = &address_space_memory; |
| |
| /* Init ACPI memory hotplug IO base address */ |
| pcms->memhp_io_base = ACPI_MEMORY_HOTPLUG_BASE; |
| } |
| |
| /* |
| * The 64bit pci hole starts after "above 4G RAM" and |
| * potentially the space reserved for memory hotplug. |
| */ |
| uint64_t pc_pci_hole64_start(void) |
| { |
| PCMachineState *pcms = PC_MACHINE(qdev_get_machine()); |
| PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); |
| MachineState *ms = MACHINE(pcms); |
| uint64_t hole64_start = 0; |
| ram_addr_t size = 0; |
| |
| if (pcms->cxl_devices_state.is_enabled) { |
| hole64_start = pc_get_cxl_range_end(pcms); |
| } else if (pcmc->has_reserved_memory && (ms->ram_size < ms->maxram_size)) { |
| pc_get_device_memory_range(pcms, &hole64_start, &size); |
| if (!pcmc->broken_reserved_end) { |
| hole64_start += size; |
| } |
| } else { |
| hole64_start = pc_above_4g_end(pcms); |
| } |
| |
| return ROUND_UP(hole64_start, 1 * GiB); |
| } |
| |
| DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus) |
| { |
| DeviceState *dev = NULL; |
| |
| rom_set_order_override(FW_CFG_ORDER_OVERRIDE_VGA); |
| if (pci_bus) { |
| PCIDevice *pcidev = pci_vga_init(pci_bus); |
| dev = pcidev ? &pcidev->qdev : NULL; |
| } else if (isa_bus) { |
| ISADevice *isadev = isa_vga_init(isa_bus); |
| dev = isadev ? DEVICE(isadev) : NULL; |
| } |
| rom_reset_order_override(); |
| return dev; |
| } |
| |
| static const MemoryRegionOps ioport80_io_ops = { |
| .write = ioport80_write, |
| .read = ioport80_read, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .impl = { |
| .min_access_size = 1, |
| .max_access_size = 1, |
| }, |
| }; |
| |
| static const MemoryRegionOps ioportF0_io_ops = { |
| .write = ioportF0_write, |
| .read = ioportF0_read, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .impl = { |
| .min_access_size = 1, |
| .max_access_size = 1, |
| }, |
| }; |
| |
| static void pc_superio_init(ISABus *isa_bus, bool create_fdctrl, |
| bool create_i8042, bool no_vmport) |
| { |
| int i; |
| DriveInfo *fd[MAX_FD]; |
| qemu_irq *a20_line; |
| ISADevice *i8042, *port92, *vmmouse; |
| |
| serial_hds_isa_init(isa_bus, 0, MAX_ISA_SERIAL_PORTS); |
| parallel_hds_isa_init(isa_bus, MAX_PARALLEL_PORTS); |
| |
| for (i = 0; i < MAX_FD; i++) { |
| fd[i] = drive_get(IF_FLOPPY, 0, i); |
| create_fdctrl |= !!fd[i]; |
| } |
| if (create_fdctrl) { |
| #ifdef CONFIG_FDC_ISA |
| ISADevice *fdc = isa_new(TYPE_ISA_FDC); |
| if (fdc) { |
| isa_realize_and_unref(fdc, isa_bus, &error_fatal); |
| isa_fdc_init_drives(fdc, fd); |
| } |
| #endif |
| } |
| |
| if (!create_i8042) { |
| return; |
| } |
| |
| i8042 = isa_create_simple(isa_bus, TYPE_I8042); |
| if (!no_vmport) { |
| isa_create_simple(isa_bus, TYPE_VMPORT); |
| vmmouse = isa_try_new("vmmouse"); |
| } else { |
| vmmouse = NULL; |
| } |
| if (vmmouse) { |
| object_property_set_link(OBJECT(vmmouse), TYPE_I8042, OBJECT(i8042), |
| &error_abort); |
| isa_realize_and_unref(vmmouse, isa_bus, &error_fatal); |
| } |
| port92 = isa_create_simple(isa_bus, TYPE_PORT92); |
| |
| a20_line = qemu_allocate_irqs(handle_a20_line_change, first_cpu, 2); |
| qdev_connect_gpio_out_named(DEVICE(i8042), |
| I8042_A20_LINE, 0, a20_line[0]); |
| qdev_connect_gpio_out_named(DEVICE(port92), |
| PORT92_A20_LINE, 0, a20_line[1]); |
| g_free(a20_line); |
| } |
| |
| void pc_basic_device_init(struct PCMachineState *pcms, |
| ISABus *isa_bus, qemu_irq *gsi, |
| ISADevice *rtc_state, |
| bool create_fdctrl, |
| uint32_t hpet_irqs) |
| { |
| int i; |
| DeviceState *hpet = NULL; |
| int pit_isa_irq = 0; |
| qemu_irq pit_alt_irq = NULL; |
| ISADevice *pit = NULL; |
| MemoryRegion *ioport80_io = g_new(MemoryRegion, 1); |
| MemoryRegion *ioportF0_io = g_new(MemoryRegion, 1); |
| X86MachineState *x86ms = X86_MACHINE(pcms); |
| |
| memory_region_init_io(ioport80_io, NULL, &ioport80_io_ops, NULL, "ioport80", 1); |
| memory_region_add_subregion(isa_bus->address_space_io, 0x80, ioport80_io); |
| |
| memory_region_init_io(ioportF0_io, NULL, &ioportF0_io_ops, NULL, "ioportF0", 1); |
| memory_region_add_subregion(isa_bus->address_space_io, 0xf0, ioportF0_io); |
| |
| /* |
| * Check if an HPET shall be created. |
| */ |
| if (pcms->hpet_enabled) { |
| qemu_irq rtc_irq; |
| |
| hpet = qdev_try_new(TYPE_HPET); |
| if (!hpet) { |
| error_report("couldn't create HPET device"); |
| exit(1); |
| } |
| /* |
| * For pc-piix-*, hpet's intcap is always IRQ2. For pc-q35-*, |
| * use IRQ16~23, IRQ8 and IRQ2. If the user has already set |
| * the property, use whatever mask they specified. |
| */ |
| uint8_t compat = object_property_get_uint(OBJECT(hpet), |
| HPET_INTCAP, NULL); |
| if (!compat) { |
| qdev_prop_set_uint32(hpet, HPET_INTCAP, hpet_irqs); |
| } |
| sysbus_realize_and_unref(SYS_BUS_DEVICE(hpet), &error_fatal); |
| sysbus_mmio_map(SYS_BUS_DEVICE(hpet), 0, HPET_BASE); |
| |
| for (i = 0; i < IOAPIC_NUM_PINS; i++) { |
| sysbus_connect_irq(SYS_BUS_DEVICE(hpet), i, gsi[i]); |
| } |
| pit_isa_irq = -1; |
| pit_alt_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_PIT_INT); |
| rtc_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_RTC_INT); |
| |
| /* overwrite connection created by south bridge */ |
| qdev_connect_gpio_out(DEVICE(rtc_state), 0, rtc_irq); |
| } |
| |
| object_property_add_alias(OBJECT(pcms), "rtc-time", OBJECT(rtc_state), |
| "date"); |
| |
| #ifdef CONFIG_XEN_EMU |
| if (xen_mode == XEN_EMULATE) { |
| xen_overlay_create(); |
| xen_evtchn_create(IOAPIC_NUM_PINS, gsi); |
| xen_gnttab_create(); |
| xen_xenstore_create(); |
| if (pcms->pcibus) { |
| pci_create_simple(pcms->pcibus, -1, "xen-platform"); |
| } |
| xen_bus_init(); |
| } |
| #endif |
| |
| qemu_register_boot_set(pc_boot_set, pcms); |
| set_boot_dev(pcms, MC146818_RTC(rtc_state), |
| MACHINE(pcms)->boot_config.order, &error_fatal); |
| |
| if (!xen_enabled() && |
| (x86ms->pit == ON_OFF_AUTO_AUTO || x86ms->pit == ON_OFF_AUTO_ON)) { |
| if (kvm_pit_in_kernel()) { |
| pit = kvm_pit_init(isa_bus, 0x40); |
| } else { |
| pit = i8254_pit_init(isa_bus, 0x40, pit_isa_irq, pit_alt_irq); |
| } |
| if (hpet) { |
| /* connect PIT to output control line of the HPET */ |
| qdev_connect_gpio_out(hpet, 0, qdev_get_gpio_in(DEVICE(pit), 0)); |
| } |
| object_property_set_link(OBJECT(pcms->pcspk), "pit", |
| OBJECT(pit), &error_fatal); |
| isa_realize_and_unref(pcms->pcspk, isa_bus, &error_fatal); |
| } |
| |
| assert(pcms->vmport >= 0 && pcms->vmport < ON_OFF_AUTO__MAX); |
| if (pcms->vmport == ON_OFF_AUTO_AUTO) { |
| pcms->vmport = xen_enabled() ? ON_OFF_AUTO_OFF : ON_OFF_AUTO_ON; |
| } |
| |
| /* Super I/O */ |
| pc_superio_init(isa_bus, create_fdctrl, pcms->i8042_enabled, |
| pcms->vmport != ON_OFF_AUTO_ON); |
| } |
| |
| void pc_nic_init(PCMachineClass *pcmc, ISABus *isa_bus, PCIBus *pci_bus) |
| { |
| MachineClass *mc = MACHINE_CLASS(pcmc); |
| bool default_is_ne2k = g_str_equal(mc->default_nic, TYPE_ISA_NE2000); |
| NICInfo *nd; |
| |
| rom_set_order_override(FW_CFG_ORDER_OVERRIDE_NIC); |
| |
| while ((nd = qemu_find_nic_info(TYPE_ISA_NE2000, default_is_ne2k, NULL))) { |
| pc_init_ne2k_isa(isa_bus, nd, &error_fatal); |
| } |
| |
| /* Anything remaining should be a PCI NIC */ |
| pci_init_nic_devices(pci_bus, mc->default_nic); |
| |
| rom_reset_order_override(); |
| } |
| |
| void pc_i8259_create(ISABus *isa_bus, qemu_irq *i8259_irqs) |
| { |
| qemu_irq *i8259; |
| |
| if (kvm_pic_in_kernel()) { |
| i8259 = kvm_i8259_init(isa_bus); |
| } else if (xen_enabled()) { |
| i8259 = xen_interrupt_controller_init(); |
| } else { |
| i8259 = i8259_init(isa_bus, x86_allocate_cpu_irq()); |
| } |
| |
| for (size_t i = 0; i < ISA_NUM_IRQS; i++) { |
| i8259_irqs[i] = i8259[i]; |
| } |
| |
| g_free(i8259); |
| } |
| |
| static void pc_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev, |
| Error **errp) |
| { |
| const X86MachineState *x86ms = X86_MACHINE(hotplug_dev); |
| const MachineState *ms = MACHINE(hotplug_dev); |
| const bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); |
| Error *local_err = NULL; |
| |
| /* |
| * When "acpi=off" is used with the Q35 machine type, no ACPI is built, |
| * but pcms->acpi_dev is still created. Check !acpi_enabled in |
| * addition to cover this case. |
| */ |
| if (!x86ms->acpi_dev || !x86_machine_is_acpi_enabled(x86ms)) { |
| error_setg(errp, |
| "memory hotplug is not enabled: missing acpi device or acpi disabled"); |
| return; |
| } |
| |
| if (is_nvdimm && !ms->nvdimms_state->is_enabled) { |
| error_setg(errp, "nvdimm is not enabled: missing 'nvdimm' in '-M'"); |
| return; |
| } |
| |
| hotplug_handler_pre_plug(x86ms->acpi_dev, dev, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| |
| pc_dimm_pre_plug(PC_DIMM(dev), MACHINE(hotplug_dev), errp); |
| } |
| |
| static void pc_memory_plug(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(hotplug_dev); |
| X86MachineState *x86ms = X86_MACHINE(hotplug_dev); |
| MachineState *ms = MACHINE(hotplug_dev); |
| bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM); |
| |
| pc_dimm_plug(PC_DIMM(dev), MACHINE(pcms)); |
| |
| if (is_nvdimm) { |
| nvdimm_plug(ms->nvdimms_state); |
| } |
| |
| hotplug_handler_plug(x86ms->acpi_dev, dev, &error_abort); |
| } |
| |
| static void pc_memory_unplug_request(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| X86MachineState *x86ms = X86_MACHINE(hotplug_dev); |
| |
| /* |
| * When "acpi=off" is used with the Q35 machine type, no ACPI is built, |
| * but pcms->acpi_dev is still created. Check !acpi_enabled in |
| * addition to cover this case. |
| */ |
| if (!x86ms->acpi_dev || !x86_machine_is_acpi_enabled(x86ms)) { |
| error_setg(errp, |
| "memory hotplug is not enabled: missing acpi device or acpi disabled"); |
| return; |
| } |
| |
| if (object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM)) { |
| error_setg(errp, "nvdimm device hot unplug is not supported yet."); |
| return; |
| } |
| |
| hotplug_handler_unplug_request(x86ms->acpi_dev, dev, |
| errp); |
| } |
| |
| static void pc_memory_unplug(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(hotplug_dev); |
| X86MachineState *x86ms = X86_MACHINE(hotplug_dev); |
| Error *local_err = NULL; |
| |
| hotplug_handler_unplug(x86ms->acpi_dev, dev, &local_err); |
| if (local_err) { |
| goto out; |
| } |
| |
| pc_dimm_unplug(PC_DIMM(dev), MACHINE(pcms)); |
| qdev_unrealize(dev); |
| out: |
| error_propagate(errp, local_err); |
| } |
| |
| static void pc_hv_balloon_pre_plug(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| /* The vmbus handler has no hotplug handler; we should never end up here. */ |
| g_assert(!dev->hotplugged); |
| memory_device_pre_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev), errp); |
| } |
| |
| static void pc_hv_balloon_plug(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| memory_device_plug(MEMORY_DEVICE(dev), MACHINE(hotplug_dev)); |
| } |
| |
| static void pc_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { |
| pc_memory_pre_plug(hotplug_dev, dev, errp); |
| } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { |
| x86_cpu_pre_plug(hotplug_dev, dev, errp); |
| } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MD_PCI)) { |
| virtio_md_pci_pre_plug(VIRTIO_MD_PCI(dev), MACHINE(hotplug_dev), errp); |
| } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { |
| /* Declare the APIC range as the reserved MSI region */ |
| char *resv_prop_str = g_strdup_printf("0xfee00000:0xfeefffff:%d", |
| VIRTIO_IOMMU_RESV_MEM_T_MSI); |
| QList *reserved_regions = qlist_new(); |
| |
| qlist_append_str(reserved_regions, resv_prop_str); |
| qdev_prop_set_array(dev, "reserved-regions", reserved_regions); |
| |
| g_free(resv_prop_str); |
| } |
| |
| if (object_dynamic_cast(OBJECT(dev), TYPE_X86_IOMMU_DEVICE) || |
| object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI)) { |
| PCMachineState *pcms = PC_MACHINE(hotplug_dev); |
| |
| if (pcms->iommu) { |
| error_setg(errp, "QEMU does not support multiple vIOMMUs " |
| "for x86 yet."); |
| return; |
| } |
| pcms->iommu = dev; |
| } else if (object_dynamic_cast(OBJECT(dev), TYPE_HV_BALLOON)) { |
| pc_hv_balloon_pre_plug(hotplug_dev, dev, errp); |
| } |
| } |
| |
| static void pc_machine_device_plug_cb(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { |
| pc_memory_plug(hotplug_dev, dev, errp); |
| } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { |
| x86_cpu_plug(hotplug_dev, dev, errp); |
| } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MD_PCI)) { |
| virtio_md_pci_plug(VIRTIO_MD_PCI(dev), MACHINE(hotplug_dev), errp); |
| } else if (object_dynamic_cast(OBJECT(dev), TYPE_HV_BALLOON)) { |
| pc_hv_balloon_plug(hotplug_dev, dev, errp); |
| } |
| } |
| |
| static void pc_machine_device_unplug_request_cb(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { |
| pc_memory_unplug_request(hotplug_dev, dev, errp); |
| } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { |
| x86_cpu_unplug_request_cb(hotplug_dev, dev, errp); |
| } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MD_PCI)) { |
| virtio_md_pci_unplug_request(VIRTIO_MD_PCI(dev), MACHINE(hotplug_dev), |
| errp); |
| } else { |
| error_setg(errp, "acpi: device unplug request for not supported device" |
| " type: %s", object_get_typename(OBJECT(dev))); |
| } |
| } |
| |
| static void pc_machine_device_unplug_cb(HotplugHandler *hotplug_dev, |
| DeviceState *dev, Error **errp) |
| { |
| if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) { |
| pc_memory_unplug(hotplug_dev, dev, errp); |
| } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU)) { |
| x86_cpu_unplug_cb(hotplug_dev, dev, errp); |
| } else if (object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MD_PCI)) { |
| virtio_md_pci_unplug(VIRTIO_MD_PCI(dev), MACHINE(hotplug_dev), errp); |
| } else { |
| error_setg(errp, "acpi: device unplug for not supported device" |
| " type: %s", object_get_typename(OBJECT(dev))); |
| } |
| } |
| |
| static HotplugHandler *pc_get_hotplug_handler(MachineState *machine, |
| DeviceState *dev) |
| { |
| if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) || |
| object_dynamic_cast(OBJECT(dev), TYPE_CPU) || |
| object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_MD_PCI) || |
| object_dynamic_cast(OBJECT(dev), TYPE_VIRTIO_IOMMU_PCI) || |
| object_dynamic_cast(OBJECT(dev), TYPE_HV_BALLOON) || |
| object_dynamic_cast(OBJECT(dev), TYPE_X86_IOMMU_DEVICE)) { |
| return HOTPLUG_HANDLER(machine); |
| } |
| |
| return NULL; |
| } |
| |
| static void pc_machine_get_vmport(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| OnOffAuto vmport = pcms->vmport; |
| |
| visit_type_OnOffAuto(v, name, &vmport, errp); |
| } |
| |
| static void pc_machine_set_vmport(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| visit_type_OnOffAuto(v, name, &pcms->vmport, errp); |
| } |
| |
| static bool pc_machine_get_fd_bootchk(Object *obj, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| return pcms->fd_bootchk; |
| } |
| |
| static void pc_machine_set_fd_bootchk(Object *obj, bool value, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| pcms->fd_bootchk = value; |
| } |
| |
| static bool pc_machine_get_smbus(Object *obj, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| return pcms->smbus_enabled; |
| } |
| |
| static void pc_machine_set_smbus(Object *obj, bool value, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| pcms->smbus_enabled = value; |
| } |
| |
| static bool pc_machine_get_sata(Object *obj, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| return pcms->sata_enabled; |
| } |
| |
| static void pc_machine_set_sata(Object *obj, bool value, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| pcms->sata_enabled = value; |
| } |
| |
| static bool pc_machine_get_hpet(Object *obj, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| return pcms->hpet_enabled; |
| } |
| |
| static void pc_machine_set_hpet(Object *obj, bool value, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| pcms->hpet_enabled = value; |
| } |
| |
| static bool pc_machine_get_i8042(Object *obj, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| return pcms->i8042_enabled; |
| } |
| |
| static void pc_machine_set_i8042(Object *obj, bool value, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| pcms->i8042_enabled = value; |
| } |
| |
| static bool pc_machine_get_default_bus_bypass_iommu(Object *obj, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| return pcms->default_bus_bypass_iommu; |
| } |
| |
| static void pc_machine_set_default_bus_bypass_iommu(Object *obj, bool value, |
| Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| pcms->default_bus_bypass_iommu = value; |
| } |
| |
| static void pc_machine_get_smbios_ep(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| SmbiosEntryPointType smbios_entry_point_type = pcms->smbios_entry_point_type; |
| |
| visit_type_SmbiosEntryPointType(v, name, &smbios_entry_point_type, errp); |
| } |
| |
| static void pc_machine_set_smbios_ep(Object *obj, Visitor *v, const char *name, |
| void *opaque, Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| |
| visit_type_SmbiosEntryPointType(v, name, &pcms->smbios_entry_point_type, errp); |
| } |
| |
| static void pc_machine_get_max_ram_below_4g(Object *obj, Visitor *v, |
| const char *name, void *opaque, |
| Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| uint64_t value = pcms->max_ram_below_4g; |
| |
| visit_type_size(v, name, &value, errp); |
| } |
| |
| static void pc_machine_set_max_ram_below_4g(Object *obj, Visitor *v, |
| const char *name, void *opaque, |
| Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| uint64_t value; |
| |
| if (!visit_type_size(v, name, &value, errp)) { |
| return; |
| } |
| if (value > 4 * GiB) { |
| error_setg(errp, |
| "Machine option 'max-ram-below-4g=%"PRIu64 |
| "' expects size less than or equal to 4G", value); |
| return; |
| } |
| |
| if (value < 1 * MiB) { |
| warn_report("Only %" PRIu64 " bytes of RAM below the 4GiB boundary," |
| "BIOS may not work with less than 1MiB", value); |
| } |
| |
| pcms->max_ram_below_4g = value; |
| } |
| |
| static void pc_machine_get_max_fw_size(Object *obj, Visitor *v, |
| const char *name, void *opaque, |
| Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| uint64_t value = pcms->max_fw_size; |
| |
| visit_type_size(v, name, &value, errp); |
| } |
| |
| static void pc_machine_set_max_fw_size(Object *obj, Visitor *v, |
| const char *name, void *opaque, |
| Error **errp) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| uint64_t value; |
| |
| if (!visit_type_size(v, name, &value, errp)) { |
| return; |
| } |
| |
| /* |
| * We don't have a theoretically justifiable exact lower bound on the base |
| * address of any flash mapping. In practice, the IO-APIC MMIO range is |
| * [0xFEE00000..0xFEE01000] -- see IO_APIC_DEFAULT_ADDRESS --, leaving free |
| * only 18MiB-4KiB below 4GiB. For now, restrict the cumulative mapping to |
| * 16MiB in size. |
| */ |
| if (value > 16 * MiB) { |
| error_setg(errp, |
| "User specified max allowed firmware size %" PRIu64 " is " |
| "greater than 16MiB. If combined firmware size exceeds " |
| "16MiB the system may not boot, or experience intermittent" |
| "stability issues.", |
| value); |
| return; |
| } |
| |
| pcms->max_fw_size = value; |
| } |
| |
| |
| static void pc_machine_initfn(Object *obj) |
| { |
| PCMachineState *pcms = PC_MACHINE(obj); |
| PCMachineClass *pcmc = PC_MACHINE_GET_CLASS(pcms); |
| |
| #ifdef CONFIG_VMPORT |
| pcms->vmport = ON_OFF_AUTO_AUTO; |
| #else |
| pcms->vmport = ON_OFF_AUTO_OFF; |
| #endif /* CONFIG_VMPORT */ |
| pcms->max_ram_below_4g = 0; /* use default */ |
| pcms->smbios_entry_point_type = pcmc->default_smbios_ep_type; |
| pcms->south_bridge = pcmc->default_south_bridge; |
| |
| /* acpi build is enabled by default if machine supports it */ |
| pcms->acpi_build_enabled = pcmc->has_acpi_build; |
| pcms->smbus_enabled = true; |
| pcms->sata_enabled = true; |
| pcms->i8042_enabled = true; |
| pcms->max_fw_size = 8 * MiB; |
| #ifdef CONFIG_HPET |
| pcms->hpet_enabled = true; |
| #endif |
| pcms->fd_bootchk = true; |
| pcms->default_bus_bypass_iommu = false; |
| |
| pc_system_flash_create(pcms); |
| pcms->pcspk = isa_new(TYPE_PC_SPEAKER); |
| object_property_add_alias(OBJECT(pcms), "pcspk-audiodev", |
| OBJECT(pcms->pcspk), "audiodev"); |
| if (pcmc->pci_enabled) { |
| cxl_machine_init(obj, &pcms->cxl_devices_state); |
| } |
| |
| pcms->machine_done.notify = pc_machine_done; |
| qemu_add_machine_init_done_notifier(&pcms->machine_done); |
| } |
| |
| static void pc_machine_reset(MachineState *machine, ShutdownCause reason) |
| { |
| CPUState *cs; |
| X86CPU *cpu; |
| |
| qemu_devices_reset(reason); |
| |
| /* Reset APIC after devices have been reset to cancel |
| * any changes that qemu_devices_reset() might have done. |
| */ |
| CPU_FOREACH(cs) { |
| cpu = X86_CPU(cs); |
| |
| x86_cpu_after_reset(cpu); |
| } |
| } |
| |
| static void pc_machine_wakeup(MachineState *machine) |
| { |
| cpu_synchronize_all_states(); |
| pc_machine_reset(machine, SHUTDOWN_CAUSE_NONE); |
| cpu_synchronize_all_post_reset(); |
| } |
| |
| static bool pc_hotplug_allowed(MachineState *ms, DeviceState *dev, Error **errp) |
| { |
| X86IOMMUState *iommu = x86_iommu_get_default(); |
| IntelIOMMUState *intel_iommu; |
| |
| if (iommu && |
| object_dynamic_cast((Object *)iommu, TYPE_INTEL_IOMMU_DEVICE) && |
| object_dynamic_cast((Object *)dev, "vfio-pci")) { |
| intel_iommu = INTEL_IOMMU_DEVICE(iommu); |
| if (!intel_iommu->caching_mode) { |
| error_setg(errp, "Device assignment is not allowed without " |
| "enabling caching-mode=on for Intel IOMMU."); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| static void pc_machine_class_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| X86MachineClass *x86mc = X86_MACHINE_CLASS(oc); |
| PCMachineClass *pcmc = PC_MACHINE_CLASS(oc); |
| HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc); |
| |
| pcmc->pci_enabled = true; |
| pcmc->has_acpi_build = true; |
| pcmc->smbios_defaults = true; |
| pcmc->gigabyte_align = true; |
| pcmc->has_reserved_memory = true; |
| pcmc->enforce_amd_1tb_hole = true; |
| pcmc->isa_bios_alias = true; |
| pcmc->pvh_enabled = true; |
| pcmc->kvmclock_create_always = true; |
| x86mc->apic_xrupt_override = true; |
| assert(!mc->get_hotplug_handler); |
| mc->get_hotplug_handler = pc_get_hotplug_handler; |
| mc->hotplug_allowed = pc_hotplug_allowed; |
| mc->auto_enable_numa_with_memhp = true; |
| mc->auto_enable_numa_with_memdev = true; |
| mc->has_hotpluggable_cpus = true; |
| mc->default_boot_order = "cad"; |
| mc->block_default_type = IF_IDE; |
| mc->max_cpus = 255; |
| mc->reset = pc_machine_reset; |
| mc->wakeup = pc_machine_wakeup; |
| hc->pre_plug = pc_machine_device_pre_plug_cb; |
| hc->plug = pc_machine_device_plug_cb; |
| hc->unplug_request = pc_machine_device_unplug_request_cb; |
| hc->unplug = pc_machine_device_unplug_cb; |
| mc->default_cpu_type = TARGET_DEFAULT_CPU_TYPE; |
| mc->nvdimm_supported = true; |
| mc->smp_props.dies_supported = true; |
| mc->smp_props.modules_supported = true; |
| mc->default_ram_id = "pc.ram"; |
| pcmc->default_smbios_ep_type = SMBIOS_ENTRY_POINT_TYPE_AUTO; |
| |
| object_class_property_add(oc, PC_MACHINE_MAX_RAM_BELOW_4G, "size", |
| pc_machine_get_max_ram_below_4g, pc_machine_set_max_ram_below_4g, |
| NULL, NULL); |
| object_class_property_set_description(oc, PC_MACHINE_MAX_RAM_BELOW_4G, |
| "Maximum ram below the 4G boundary (32bit boundary)"); |
| |
| object_class_property_add(oc, PC_MACHINE_VMPORT, "OnOffAuto", |
| pc_machine_get_vmport, pc_machine_set_vmport, |
| NULL, NULL); |
| object_class_property_set_description(oc, PC_MACHINE_VMPORT, |
| "Enable vmport (pc & q35)"); |
| |
| object_class_property_add_bool(oc, PC_MACHINE_SMBUS, |
| pc_machine_get_smbus, pc_machine_set_smbus); |
| object_class_property_set_description(oc, PC_MACHINE_SMBUS, |
| "Enable/disable system management bus"); |
| |
| object_class_property_add_bool(oc, PC_MACHINE_SATA, |
| pc_machine_get_sata, pc_machine_set_sata); |
| object_class_property_set_description(oc, PC_MACHINE_SATA, |
| "Enable/disable Serial ATA bus"); |
| |
| object_class_property_add_bool(oc, "hpet", |
| pc_machine_get_hpet, pc_machine_set_hpet); |
| object_class_property_set_description(oc, "hpet", |
| "Enable/disable high precision event timer emulation"); |
| |
| object_class_property_add_bool(oc, PC_MACHINE_I8042, |
| pc_machine_get_i8042, pc_machine_set_i8042); |
| |
| object_class_property_add_bool(oc, "default-bus-bypass-iommu", |
| pc_machine_get_default_bus_bypass_iommu, |
| pc_machine_set_default_bus_bypass_iommu); |
| |
| object_class_property_add(oc, PC_MACHINE_MAX_FW_SIZE, "size", |
| pc_machine_get_max_fw_size, pc_machine_set_max_fw_size, |
| NULL, NULL); |
| object_class_property_set_description(oc, PC_MACHINE_MAX_FW_SIZE, |
| "Maximum combined firmware size"); |
| |
| object_class_property_add(oc, PC_MACHINE_SMBIOS_EP, "str", |
| pc_machine_get_smbios_ep, pc_machine_set_smbios_ep, |
| NULL, NULL); |
| object_class_property_set_description(oc, PC_MACHINE_SMBIOS_EP, |
| "SMBIOS Entry Point type [32, 64]"); |
| |
| object_class_property_add_bool(oc, "fd-bootchk", |
| pc_machine_get_fd_bootchk, |
| pc_machine_set_fd_bootchk); |
| } |
| |
| static const TypeInfo pc_machine_info = { |
| .name = TYPE_PC_MACHINE, |
| .parent = TYPE_X86_MACHINE, |
| .abstract = true, |
| .instance_size = sizeof(PCMachineState), |
| .instance_init = pc_machine_initfn, |
| .class_size = sizeof(PCMachineClass), |
| .class_init = pc_machine_class_init, |
| .interfaces = (InterfaceInfo[]) { |
| { TYPE_HOTPLUG_HANDLER }, |
| { } |
| }, |
| }; |
| |
| static void pc_machine_register_types(void) |
| { |
| type_register_static(&pc_machine_info); |
| } |
| |
| type_init(pc_machine_register_types) |