| #ifndef QEMU_HW_MILKYMIST_H |
| #define QEMU_HW_MILKYMIST_H |
| |
| #include "hw/qdev.h" |
| #include "net/net.h" |
| |
| static inline DeviceState *milkymist_uart_create(hwaddr base, |
| qemu_irq irq) |
| { |
| DeviceState *dev; |
| |
| dev = qdev_create(NULL, "milkymist-uart"); |
| qdev_init_nofail(dev); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq); |
| |
| return dev; |
| } |
| |
| static inline DeviceState *milkymist_hpdmc_create(hwaddr base) |
| { |
| DeviceState *dev; |
| |
| dev = qdev_create(NULL, "milkymist-hpdmc"); |
| qdev_init_nofail(dev); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); |
| |
| return dev; |
| } |
| |
| static inline DeviceState *milkymist_memcard_create(hwaddr base) |
| { |
| DeviceState *dev; |
| |
| dev = qdev_create(NULL, "milkymist-memcard"); |
| qdev_init_nofail(dev); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); |
| |
| return dev; |
| } |
| |
| static inline DeviceState *milkymist_vgafb_create(hwaddr base, |
| uint32_t fb_offset, uint32_t fb_mask) |
| { |
| DeviceState *dev; |
| |
| dev = qdev_create(NULL, "milkymist-vgafb"); |
| qdev_prop_set_uint32(dev, "fb_offset", fb_offset); |
| qdev_prop_set_uint32(dev, "fb_mask", fb_mask); |
| qdev_init_nofail(dev); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); |
| |
| return dev; |
| } |
| |
| static inline DeviceState *milkymist_sysctl_create(hwaddr base, |
| qemu_irq gpio_irq, qemu_irq timer0_irq, qemu_irq timer1_irq, |
| uint32_t freq_hz, uint32_t system_id, uint32_t capabilities, |
| uint32_t gpio_strappings) |
| { |
| DeviceState *dev; |
| |
| dev = qdev_create(NULL, "milkymist-sysctl"); |
| qdev_prop_set_uint32(dev, "frequency", freq_hz); |
| qdev_prop_set_uint32(dev, "systemid", system_id); |
| qdev_prop_set_uint32(dev, "capabilities", capabilities); |
| qdev_prop_set_uint32(dev, "gpio_strappings", gpio_strappings); |
| qdev_init_nofail(dev); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, gpio_irq); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, timer0_irq); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, timer1_irq); |
| |
| return dev; |
| } |
| |
| static inline DeviceState *milkymist_pfpu_create(hwaddr base, |
| qemu_irq irq) |
| { |
| DeviceState *dev; |
| |
| dev = qdev_create(NULL, "milkymist-pfpu"); |
| qdev_init_nofail(dev); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq); |
| return dev; |
| } |
| |
| #ifdef CONFIG_OPENGL |
| #include <X11/Xlib.h> |
| #include <GL/glx.h> |
| static const int glx_fbconfig_attr[] = { |
| GLX_GREEN_SIZE, 5, |
| GLX_GREEN_SIZE, 6, |
| GLX_BLUE_SIZE, 5, |
| None |
| }; |
| #endif |
| |
| static inline DeviceState *milkymist_tmu2_create(hwaddr base, |
| qemu_irq irq) |
| { |
| #ifdef CONFIG_OPENGL |
| DeviceState *dev; |
| Display *d; |
| GLXFBConfig *configs; |
| int nelements; |
| int ver_major, ver_minor; |
| |
| if (display_type == DT_NOGRAPHIC) { |
| return NULL; |
| } |
| |
| /* check that GLX will work */ |
| d = XOpenDisplay(NULL); |
| if (d == NULL) { |
| return NULL; |
| } |
| |
| if (!glXQueryVersion(d, &ver_major, &ver_minor)) { |
| /* Yeah, sometimes getting the GLX version can fail. |
| * Isn't X beautiful? */ |
| XCloseDisplay(d); |
| return NULL; |
| } |
| |
| if ((ver_major < 1) || ((ver_major == 1) && (ver_minor < 3))) { |
| printf("Your GLX version is %d.%d," |
| "but TMU emulation needs at least 1.3. TMU disabled.\n", |
| ver_major, ver_minor); |
| XCloseDisplay(d); |
| return NULL; |
| } |
| |
| configs = glXChooseFBConfig(d, 0, glx_fbconfig_attr, &nelements); |
| if (configs == NULL) { |
| XCloseDisplay(d); |
| return NULL; |
| } |
| |
| XFree(configs); |
| XCloseDisplay(d); |
| |
| dev = qdev_create(NULL, "milkymist-tmu2"); |
| qdev_init_nofail(dev); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq); |
| |
| return dev; |
| #else |
| return NULL; |
| #endif |
| } |
| |
| static inline DeviceState *milkymist_ac97_create(hwaddr base, |
| qemu_irq crrequest_irq, qemu_irq crreply_irq, qemu_irq dmar_irq, |
| qemu_irq dmaw_irq) |
| { |
| DeviceState *dev; |
| |
| dev = qdev_create(NULL, "milkymist-ac97"); |
| qdev_init_nofail(dev); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, crrequest_irq); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, crreply_irq); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, dmar_irq); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 3, dmaw_irq); |
| |
| return dev; |
| } |
| |
| static inline DeviceState *milkymist_minimac2_create(hwaddr base, |
| hwaddr buffers_base, qemu_irq rx_irq, qemu_irq tx_irq) |
| { |
| DeviceState *dev; |
| |
| qemu_check_nic_model(&nd_table[0], "minimac2"); |
| dev = qdev_create(NULL, "milkymist-minimac2"); |
| qdev_set_nic_properties(dev, &nd_table[0]); |
| qdev_init_nofail(dev); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, buffers_base); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, rx_irq); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, tx_irq); |
| |
| return dev; |
| } |
| |
| static inline DeviceState *milkymist_softusb_create(hwaddr base, |
| qemu_irq irq, uint32_t pmem_base, uint32_t pmem_size, |
| uint32_t dmem_base, uint32_t dmem_size) |
| { |
| DeviceState *dev; |
| |
| dev = qdev_create(NULL, "milkymist-softusb"); |
| qdev_prop_set_uint32(dev, "pmem_size", pmem_size); |
| qdev_prop_set_uint32(dev, "dmem_size", dmem_size); |
| qdev_init_nofail(dev); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, pmem_base); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, dmem_base); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq); |
| |
| return dev; |
| } |
| |
| #endif /* QEMU_HW_MILKYMIST_H */ |