| /* |
| * Generic intermediate code generation. |
| * |
| * Copyright (C) 2016-2017 LluĂs Vilanova <vilanova@ac.upc.edu> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| */ |
| |
| #ifndef EXEC__TRANSLATOR_H |
| #define EXEC__TRANSLATOR_H |
| |
| /* |
| * Include this header from a target-specific file, and add a |
| * |
| * DisasContextBase base; |
| * |
| * member in your target-specific DisasContext. |
| */ |
| |
| |
| #include "qemu/bswap.h" |
| #include "exec/exec-all.h" |
| #include "exec/cpu_ldst.h" |
| #include "exec/plugin-gen.h" |
| #include "tcg/tcg.h" |
| |
| |
| /** |
| * DisasJumpType: |
| * @DISAS_NEXT: Next instruction in program order. |
| * @DISAS_TOO_MANY: Too many instructions translated. |
| * @DISAS_NORETURN: Following code is dead. |
| * @DISAS_TARGET_*: Start of target-specific conditions. |
| * |
| * What instruction to disassemble next. |
| */ |
| typedef enum DisasJumpType { |
| DISAS_NEXT, |
| DISAS_TOO_MANY, |
| DISAS_NORETURN, |
| DISAS_TARGET_0, |
| DISAS_TARGET_1, |
| DISAS_TARGET_2, |
| DISAS_TARGET_3, |
| DISAS_TARGET_4, |
| DISAS_TARGET_5, |
| DISAS_TARGET_6, |
| DISAS_TARGET_7, |
| DISAS_TARGET_8, |
| DISAS_TARGET_9, |
| DISAS_TARGET_10, |
| DISAS_TARGET_11, |
| } DisasJumpType; |
| |
| /** |
| * DisasContextBase: |
| * @tb: Translation block for this disassembly. |
| * @pc_first: Address of first guest instruction in this TB. |
| * @pc_next: Address of next guest instruction in this TB (current during |
| * disassembly). |
| * @is_jmp: What instruction to disassemble next. |
| * @num_insns: Number of translated instructions (including current). |
| * @max_insns: Maximum number of instructions to be translated in this TB. |
| * @singlestep_enabled: "Hardware" single stepping enabled. |
| * |
| * Architecture-agnostic disassembly context. |
| */ |
| typedef struct DisasContextBase { |
| const TranslationBlock *tb; |
| target_ulong pc_first; |
| target_ulong pc_next; |
| DisasJumpType is_jmp; |
| int num_insns; |
| int max_insns; |
| bool singlestep_enabled; |
| } DisasContextBase; |
| |
| /** |
| * TranslatorOps: |
| * @init_disas_context: |
| * Initialize the target-specific portions of DisasContext struct. |
| * The generic DisasContextBase has already been initialized. |
| * |
| * @tb_start: |
| * Emit any code required before the start of the main loop, |
| * after the generic gen_tb_start(). |
| * |
| * @insn_start: |
| * Emit the tcg_gen_insn_start opcode. |
| * |
| * @translate_insn: |
| * Disassemble one instruction and set db->pc_next for the start |
| * of the following instruction. Set db->is_jmp as necessary to |
| * terminate the main loop. |
| * |
| * @tb_stop: |
| * Emit any opcodes required to exit the TB, based on db->is_jmp. |
| * |
| * @disas_log: |
| * Print instruction disassembly to log. |
| */ |
| typedef struct TranslatorOps { |
| void (*init_disas_context)(DisasContextBase *db, CPUState *cpu); |
| void (*tb_start)(DisasContextBase *db, CPUState *cpu); |
| void (*insn_start)(DisasContextBase *db, CPUState *cpu); |
| void (*translate_insn)(DisasContextBase *db, CPUState *cpu); |
| void (*tb_stop)(DisasContextBase *db, CPUState *cpu); |
| void (*disas_log)(const DisasContextBase *db, CPUState *cpu); |
| } TranslatorOps; |
| |
| /** |
| * translator_loop: |
| * @ops: Target-specific operations. |
| * @db: Disassembly context. |
| * @cpu: Target vCPU. |
| * @tb: Translation block. |
| * @max_insns: Maximum number of insns to translate. |
| * |
| * Generic translator loop. |
| * |
| * Translation will stop in the following cases (in order): |
| * - When is_jmp set by #TranslatorOps::breakpoint_check. |
| * - set to DISAS_TOO_MANY exits after translating one more insn |
| * - set to any other value than DISAS_NEXT exits immediately. |
| * - When is_jmp set by #TranslatorOps::translate_insn. |
| * - set to any value other than DISAS_NEXT exits immediately. |
| * - When the TCG operation buffer is full. |
| * - When single-stepping is enabled (system-wide or on the current vCPU). |
| * - When too many instructions have been translated. |
| */ |
| void translator_loop(const TranslatorOps *ops, DisasContextBase *db, |
| CPUState *cpu, TranslationBlock *tb, int max_insns); |
| |
| void translator_loop_temp_check(DisasContextBase *db); |
| |
| /** |
| * translator_use_goto_tb |
| * @db: Disassembly context |
| * @dest: target pc of the goto |
| * |
| * Return true if goto_tb is allowed between the current TB |
| * and the destination PC. |
| */ |
| bool translator_use_goto_tb(DisasContextBase *db, target_ulong dest); |
| |
| /* |
| * Translator Load Functions |
| * |
| * These are intended to replace the direct usage of the cpu_ld*_code |
| * functions and are mandatory for front-ends that have been migrated |
| * to the common translator_loop. These functions are only intended |
| * to be called from the translation stage and should not be called |
| * from helper functions. Those functions should be converted to encode |
| * the relevant information at translation time. |
| */ |
| |
| #define GEN_TRANSLATOR_LD(fullname, type, load_fn, swap_fn) \ |
| static inline type \ |
| fullname ## _swap(CPUArchState *env, abi_ptr pc, bool do_swap) \ |
| { \ |
| type ret = load_fn(env, pc); \ |
| if (do_swap) { \ |
| ret = swap_fn(ret); \ |
| } \ |
| plugin_insn_append(&ret, sizeof(ret)); \ |
| return ret; \ |
| } \ |
| \ |
| static inline type fullname(CPUArchState *env, abi_ptr pc) \ |
| { \ |
| return fullname ## _swap(env, pc, false); \ |
| } |
| |
| GEN_TRANSLATOR_LD(translator_ldub, uint8_t, cpu_ldub_code, /* no swap */) |
| GEN_TRANSLATOR_LD(translator_ldsw, int16_t, cpu_ldsw_code, bswap16) |
| GEN_TRANSLATOR_LD(translator_lduw, uint16_t, cpu_lduw_code, bswap16) |
| GEN_TRANSLATOR_LD(translator_ldl, uint32_t, cpu_ldl_code, bswap32) |
| GEN_TRANSLATOR_LD(translator_ldq, uint64_t, cpu_ldq_code, bswap64) |
| #undef GEN_TRANSLATOR_LD |
| |
| #endif /* EXEC__TRANSLATOR_H */ |