| /* |
| * SD Association Host Standard Specification v2.0 controller emulation |
| * |
| * Copyright (c) 2011 Samsung Electronics Co., Ltd. |
| * Mitsyanko Igor <i.mitsyanko@samsung.com> |
| * Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com> |
| * |
| * Based on MMC controller for Samsung S5PC1xx-based board emulation |
| * by Alexey Merkulov and Vladimir Monakhov. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
| * See the GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "hw/hw.h" |
| #include "sysemu/blockdev.h" |
| #include "sysemu/dma.h" |
| #include "qemu/timer.h" |
| #include "block/block_int.h" |
| #include "qemu/bitops.h" |
| |
| #include "sdhci.h" |
| |
| /* host controller debug messages */ |
| #ifndef SDHC_DEBUG |
| #define SDHC_DEBUG 0 |
| #endif |
| |
| #if SDHC_DEBUG == 0 |
| #define DPRINT_L1(fmt, args...) do { } while (0) |
| #define DPRINT_L2(fmt, args...) do { } while (0) |
| #define ERRPRINT(fmt, args...) do { } while (0) |
| #elif SDHC_DEBUG == 1 |
| #define DPRINT_L1(fmt, args...) \ |
| do {fprintf(stderr, "QEMU SDHC: "fmt, ## args); } while (0) |
| #define DPRINT_L2(fmt, args...) do { } while (0) |
| #define ERRPRINT(fmt, args...) \ |
| do {fprintf(stderr, "QEMU SDHC ERROR: "fmt, ## args); } while (0) |
| #else |
| #define DPRINT_L1(fmt, args...) \ |
| do {fprintf(stderr, "QEMU SDHC: "fmt, ## args); } while (0) |
| #define DPRINT_L2(fmt, args...) \ |
| do {fprintf(stderr, "QEMU SDHC: "fmt, ## args); } while (0) |
| #define ERRPRINT(fmt, args...) \ |
| do {fprintf(stderr, "QEMU SDHC ERROR: "fmt, ## args); } while (0) |
| #endif |
| |
| /* Default SD/MMC host controller features information, which will be |
| * presented in CAPABILITIES register of generic SD host controller at reset. |
| * If not stated otherwise: |
| * 0 - not supported, 1 - supported, other - prohibited. |
| */ |
| #define SDHC_CAPAB_64BITBUS 0ul /* 64-bit System Bus Support */ |
| #define SDHC_CAPAB_18V 1ul /* Voltage support 1.8v */ |
| #define SDHC_CAPAB_30V 0ul /* Voltage support 3.0v */ |
| #define SDHC_CAPAB_33V 1ul /* Voltage support 3.3v */ |
| #define SDHC_CAPAB_SUSPRESUME 0ul /* Suspend/resume support */ |
| #define SDHC_CAPAB_SDMA 1ul /* SDMA support */ |
| #define SDHC_CAPAB_HIGHSPEED 1ul /* High speed support */ |
| #define SDHC_CAPAB_ADMA1 1ul /* ADMA1 support */ |
| #define SDHC_CAPAB_ADMA2 1ul /* ADMA2 support */ |
| /* Maximum host controller R/W buffers size |
| * Possible values: 512, 1024, 2048 bytes */ |
| #define SDHC_CAPAB_MAXBLOCKLENGTH 512ul |
| /* Maximum clock frequency for SDclock in MHz |
| * value in range 10-63 MHz, 0 - not defined */ |
| #define SDHC_CAPAB_BASECLKFREQ 0ul |
| #define SDHC_CAPAB_TOUNIT 1ul /* Timeout clock unit 0 - kHz, 1 - MHz */ |
| /* Timeout clock frequency 1-63, 0 - not defined */ |
| #define SDHC_CAPAB_TOCLKFREQ 0ul |
| |
| /* Now check all parameters and calculate CAPABILITIES REGISTER value */ |
| #if SDHC_CAPAB_64BITBUS > 1 || SDHC_CAPAB_18V > 1 || SDHC_CAPAB_30V > 1 || \ |
| SDHC_CAPAB_33V > 1 || SDHC_CAPAB_SUSPRESUME > 1 || SDHC_CAPAB_SDMA > 1 || \ |
| SDHC_CAPAB_HIGHSPEED > 1 || SDHC_CAPAB_ADMA2 > 1 || SDHC_CAPAB_ADMA1 > 1 ||\ |
| SDHC_CAPAB_TOUNIT > 1 |
| #error Capabilities features can have value 0 or 1 only! |
| #endif |
| |
| #if SDHC_CAPAB_MAXBLOCKLENGTH == 512 |
| #define MAX_BLOCK_LENGTH 0ul |
| #elif SDHC_CAPAB_MAXBLOCKLENGTH == 1024 |
| #define MAX_BLOCK_LENGTH 1ul |
| #elif SDHC_CAPAB_MAXBLOCKLENGTH == 2048 |
| #define MAX_BLOCK_LENGTH 2ul |
| #else |
| #error Max host controller block size can have value 512, 1024 or 2048 only! |
| #endif |
| |
| #if (SDHC_CAPAB_BASECLKFREQ > 0 && SDHC_CAPAB_BASECLKFREQ < 10) || \ |
| SDHC_CAPAB_BASECLKFREQ > 63 |
| #error SDclock frequency can have value in range 0, 10-63 only! |
| #endif |
| |
| #if SDHC_CAPAB_TOCLKFREQ > 63 |
| #error Timeout clock frequency can have value in range 0-63 only! |
| #endif |
| |
| #define SDHC_CAPAB_REG_DEFAULT \ |
| ((SDHC_CAPAB_64BITBUS << 28) | (SDHC_CAPAB_18V << 26) | \ |
| (SDHC_CAPAB_30V << 25) | (SDHC_CAPAB_33V << 24) | \ |
| (SDHC_CAPAB_SUSPRESUME << 23) | (SDHC_CAPAB_SDMA << 22) | \ |
| (SDHC_CAPAB_HIGHSPEED << 21) | (SDHC_CAPAB_ADMA1 << 20) | \ |
| (SDHC_CAPAB_ADMA2 << 19) | (MAX_BLOCK_LENGTH << 16) | \ |
| (SDHC_CAPAB_BASECLKFREQ << 8) | (SDHC_CAPAB_TOUNIT << 7) | \ |
| (SDHC_CAPAB_TOCLKFREQ)) |
| |
| #define MASKED_WRITE(reg, mask, val) (reg = (reg & (mask)) | (val)) |
| |
| static uint8_t sdhci_slotint(SDHCIState *s) |
| { |
| return (s->norintsts & s->norintsigen) || (s->errintsts & s->errintsigen) || |
| ((s->norintsts & SDHC_NIS_INSERT) && (s->wakcon & SDHC_WKUP_ON_INS)) || |
| ((s->norintsts & SDHC_NIS_REMOVE) && (s->wakcon & SDHC_WKUP_ON_RMV)); |
| } |
| |
| static inline void sdhci_update_irq(SDHCIState *s) |
| { |
| qemu_set_irq(s->irq, sdhci_slotint(s)); |
| } |
| |
| static void sdhci_raise_insertion_irq(void *opaque) |
| { |
| SDHCIState *s = (SDHCIState *)opaque; |
| |
| if (s->norintsts & SDHC_NIS_REMOVE) { |
| timer_mod(s->insert_timer, |
| qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_INSERTION_DELAY); |
| } else { |
| s->prnsts = 0x1ff0000; |
| if (s->norintstsen & SDHC_NISEN_INSERT) { |
| s->norintsts |= SDHC_NIS_INSERT; |
| } |
| sdhci_update_irq(s); |
| } |
| } |
| |
| static void sdhci_insert_eject_cb(void *opaque, int irq, int level) |
| { |
| SDHCIState *s = (SDHCIState *)opaque; |
| DPRINT_L1("Card state changed: %s!\n", level ? "insert" : "eject"); |
| |
| if ((s->norintsts & SDHC_NIS_REMOVE) && level) { |
| /* Give target some time to notice card ejection */ |
| timer_mod(s->insert_timer, |
| qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_INSERTION_DELAY); |
| } else { |
| if (level) { |
| s->prnsts = 0x1ff0000; |
| if (s->norintstsen & SDHC_NISEN_INSERT) { |
| s->norintsts |= SDHC_NIS_INSERT; |
| } |
| } else { |
| s->prnsts = 0x1fa0000; |
| s->pwrcon &= ~SDHC_POWER_ON; |
| s->clkcon &= ~SDHC_CLOCK_SDCLK_EN; |
| if (s->norintstsen & SDHC_NISEN_REMOVE) { |
| s->norintsts |= SDHC_NIS_REMOVE; |
| } |
| } |
| sdhci_update_irq(s); |
| } |
| } |
| |
| static void sdhci_card_readonly_cb(void *opaque, int irq, int level) |
| { |
| SDHCIState *s = (SDHCIState *)opaque; |
| |
| if (level) { |
| s->prnsts &= ~SDHC_WRITE_PROTECT; |
| } else { |
| /* Write enabled */ |
| s->prnsts |= SDHC_WRITE_PROTECT; |
| } |
| } |
| |
| static void sdhci_reset(SDHCIState *s) |
| { |
| timer_del(s->insert_timer); |
| timer_del(s->transfer_timer); |
| /* Set all registers to 0. Capabilities registers are not cleared |
| * and assumed to always preserve their value, given to them during |
| * initialization */ |
| memset(&s->sdmasysad, 0, (uintptr_t)&s->capareg - (uintptr_t)&s->sdmasysad); |
| |
| sd_set_cb(s->card, s->ro_cb, s->eject_cb); |
| s->data_count = 0; |
| s->stopped_state = sdhc_not_stopped; |
| } |
| |
| static void sdhci_do_data_transfer(void *opaque) |
| { |
| SDHCIState *s = (SDHCIState *)opaque; |
| |
| SDHCI_GET_CLASS(s)->data_transfer(s); |
| } |
| |
| static void sdhci_send_command(SDHCIState *s) |
| { |
| SDRequest request; |
| uint8_t response[16]; |
| int rlen; |
| |
| s->errintsts = 0; |
| s->acmd12errsts = 0; |
| request.cmd = s->cmdreg >> 8; |
| request.arg = s->argument; |
| DPRINT_L1("sending CMD%u ARG[0x%08x]\n", request.cmd, request.arg); |
| rlen = sd_do_command(s->card, &request, response); |
| |
| if (s->cmdreg & SDHC_CMD_RESPONSE) { |
| if (rlen == 4) { |
| s->rspreg[0] = (response[0] << 24) | (response[1] << 16) | |
| (response[2] << 8) | response[3]; |
| s->rspreg[1] = s->rspreg[2] = s->rspreg[3] = 0; |
| DPRINT_L1("Response: RSPREG[31..0]=0x%08x\n", s->rspreg[0]); |
| } else if (rlen == 16) { |
| s->rspreg[0] = (response[11] << 24) | (response[12] << 16) | |
| (response[13] << 8) | response[14]; |
| s->rspreg[1] = (response[7] << 24) | (response[8] << 16) | |
| (response[9] << 8) | response[10]; |
| s->rspreg[2] = (response[3] << 24) | (response[4] << 16) | |
| (response[5] << 8) | response[6]; |
| s->rspreg[3] = (response[0] << 16) | (response[1] << 8) | |
| response[2]; |
| DPRINT_L1("Response received:\n RSPREG[127..96]=0x%08x, RSPREG[95.." |
| "64]=0x%08x,\n RSPREG[63..32]=0x%08x, RSPREG[31..0]=0x%08x\n", |
| s->rspreg[3], s->rspreg[2], s->rspreg[1], s->rspreg[0]); |
| } else { |
| ERRPRINT("Timeout waiting for command response\n"); |
| if (s->errintstsen & SDHC_EISEN_CMDTIMEOUT) { |
| s->errintsts |= SDHC_EIS_CMDTIMEOUT; |
| s->norintsts |= SDHC_NIS_ERR; |
| } |
| } |
| |
| if ((s->norintstsen & SDHC_NISEN_TRSCMP) && |
| (s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY) { |
| s->norintsts |= SDHC_NIS_TRSCMP; |
| } |
| } else if (rlen != 0 && (s->errintstsen & SDHC_EISEN_CMDIDX)) { |
| s->errintsts |= SDHC_EIS_CMDIDX; |
| s->norintsts |= SDHC_NIS_ERR; |
| } |
| |
| if (s->norintstsen & SDHC_NISEN_CMDCMP) { |
| s->norintsts |= SDHC_NIS_CMDCMP; |
| } |
| |
| sdhci_update_irq(s); |
| |
| if (s->blksize && (s->cmdreg & SDHC_CMD_DATA_PRESENT)) { |
| s->data_count = 0; |
| sdhci_do_data_transfer(s); |
| } |
| } |
| |
| static void sdhci_end_transfer(SDHCIState *s) |
| { |
| /* Automatically send CMD12 to stop transfer if AutoCMD12 enabled */ |
| if ((s->trnmod & SDHC_TRNS_ACMD12) != 0) { |
| SDRequest request; |
| uint8_t response[16]; |
| |
| request.cmd = 0x0C; |
| request.arg = 0; |
| DPRINT_L1("Automatically issue CMD%d %08x\n", request.cmd, request.arg); |
| sd_do_command(s->card, &request, response); |
| /* Auto CMD12 response goes to the upper Response register */ |
| s->rspreg[3] = (response[0] << 24) | (response[1] << 16) | |
| (response[2] << 8) | response[3]; |
| } |
| |
| s->prnsts &= ~(SDHC_DOING_READ | SDHC_DOING_WRITE | |
| SDHC_DAT_LINE_ACTIVE | SDHC_DATA_INHIBIT | |
| SDHC_SPACE_AVAILABLE | SDHC_DATA_AVAILABLE); |
| |
| if (s->norintstsen & SDHC_NISEN_TRSCMP) { |
| s->norintsts |= SDHC_NIS_TRSCMP; |
| } |
| |
| sdhci_update_irq(s); |
| } |
| |
| /* |
| * Programmed i/o data transfer |
| */ |
| |
| /* Fill host controller's read buffer with BLKSIZE bytes of data from card */ |
| static void sdhci_read_block_from_card(SDHCIState *s) |
| { |
| int index = 0; |
| |
| if ((s->trnmod & SDHC_TRNS_MULTI) && |
| (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) { |
| return; |
| } |
| |
| for (index = 0; index < (s->blksize & 0x0fff); index++) { |
| s->fifo_buffer[index] = sd_read_data(s->card); |
| } |
| |
| /* New data now available for READ through Buffer Port Register */ |
| s->prnsts |= SDHC_DATA_AVAILABLE; |
| if (s->norintstsen & SDHC_NISEN_RBUFRDY) { |
| s->norintsts |= SDHC_NIS_RBUFRDY; |
| } |
| |
| /* Clear DAT line active status if that was the last block */ |
| if ((s->trnmod & SDHC_TRNS_MULTI) == 0 || |
| ((s->trnmod & SDHC_TRNS_MULTI) && s->blkcnt == 1)) { |
| s->prnsts &= ~SDHC_DAT_LINE_ACTIVE; |
| } |
| |
| /* If stop at block gap request was set and it's not the last block of |
| * data - generate Block Event interrupt */ |
| if (s->stopped_state == sdhc_gap_read && (s->trnmod & SDHC_TRNS_MULTI) && |
| s->blkcnt != 1) { |
| s->prnsts &= ~SDHC_DAT_LINE_ACTIVE; |
| if (s->norintstsen & SDHC_EISEN_BLKGAP) { |
| s->norintsts |= SDHC_EIS_BLKGAP; |
| } |
| } |
| |
| sdhci_update_irq(s); |
| } |
| |
| /* Read @size byte of data from host controller @s BUFFER DATA PORT register */ |
| static uint32_t sdhci_read_dataport(SDHCIState *s, unsigned size) |
| { |
| uint32_t value = 0; |
| int i; |
| |
| /* first check that a valid data exists in host controller input buffer */ |
| if ((s->prnsts & SDHC_DATA_AVAILABLE) == 0) { |
| ERRPRINT("Trying to read from empty buffer\n"); |
| return 0; |
| } |
| |
| for (i = 0; i < size; i++) { |
| value |= s->fifo_buffer[s->data_count] << i * 8; |
| s->data_count++; |
| /* check if we've read all valid data (blksize bytes) from buffer */ |
| if ((s->data_count) >= (s->blksize & 0x0fff)) { |
| DPRINT_L2("All %u bytes of data have been read from input buffer\n", |
| s->data_count); |
| s->prnsts &= ~SDHC_DATA_AVAILABLE; /* no more data in a buffer */ |
| s->data_count = 0; /* next buff read must start at position [0] */ |
| |
| if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { |
| s->blkcnt--; |
| } |
| |
| /* if that was the last block of data */ |
| if ((s->trnmod & SDHC_TRNS_MULTI) == 0 || |
| ((s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) || |
| /* stop at gap request */ |
| (s->stopped_state == sdhc_gap_read && |
| !(s->prnsts & SDHC_DAT_LINE_ACTIVE))) { |
| SDHCI_GET_CLASS(s)->end_data_transfer(s); |
| } else { /* if there are more data, read next block from card */ |
| SDHCI_GET_CLASS(s)->read_block_from_card(s); |
| } |
| break; |
| } |
| } |
| |
| return value; |
| } |
| |
| /* Write data from host controller FIFO to card */ |
| static void sdhci_write_block_to_card(SDHCIState *s) |
| { |
| int index = 0; |
| |
| if (s->prnsts & SDHC_SPACE_AVAILABLE) { |
| if (s->norintstsen & SDHC_NISEN_WBUFRDY) { |
| s->norintsts |= SDHC_NIS_WBUFRDY; |
| } |
| sdhci_update_irq(s); |
| return; |
| } |
| |
| if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { |
| if (s->blkcnt == 0) { |
| return; |
| } else { |
| s->blkcnt--; |
| } |
| } |
| |
| for (index = 0; index < (s->blksize & 0x0fff); index++) { |
| sd_write_data(s->card, s->fifo_buffer[index]); |
| } |
| |
| /* Next data can be written through BUFFER DATORT register */ |
| s->prnsts |= SDHC_SPACE_AVAILABLE; |
| |
| /* Finish transfer if that was the last block of data */ |
| if ((s->trnmod & SDHC_TRNS_MULTI) == 0 || |
| ((s->trnmod & SDHC_TRNS_MULTI) && |
| (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0))) { |
| SDHCI_GET_CLASS(s)->end_data_transfer(s); |
| } else if (s->norintstsen & SDHC_NISEN_WBUFRDY) { |
| s->norintsts |= SDHC_NIS_WBUFRDY; |
| } |
| |
| /* Generate Block Gap Event if requested and if not the last block */ |
| if (s->stopped_state == sdhc_gap_write && (s->trnmod & SDHC_TRNS_MULTI) && |
| s->blkcnt > 0) { |
| s->prnsts &= ~SDHC_DOING_WRITE; |
| if (s->norintstsen & SDHC_EISEN_BLKGAP) { |
| s->norintsts |= SDHC_EIS_BLKGAP; |
| } |
| SDHCI_GET_CLASS(s)->end_data_transfer(s); |
| } |
| |
| sdhci_update_irq(s); |
| } |
| |
| /* Write @size bytes of @value data to host controller @s Buffer Data Port |
| * register */ |
| static void sdhci_write_dataport(SDHCIState *s, uint32_t value, unsigned size) |
| { |
| unsigned i; |
| |
| /* Check that there is free space left in a buffer */ |
| if (!(s->prnsts & SDHC_SPACE_AVAILABLE)) { |
| ERRPRINT("Can't write to data buffer: buffer full\n"); |
| return; |
| } |
| |
| for (i = 0; i < size; i++) { |
| s->fifo_buffer[s->data_count] = value & 0xFF; |
| s->data_count++; |
| value >>= 8; |
| if (s->data_count >= (s->blksize & 0x0fff)) { |
| DPRINT_L2("write buffer filled with %u bytes of data\n", |
| s->data_count); |
| s->data_count = 0; |
| s->prnsts &= ~SDHC_SPACE_AVAILABLE; |
| if (s->prnsts & SDHC_DOING_WRITE) { |
| SDHCI_GET_CLASS(s)->write_block_to_card(s); |
| } |
| } |
| } |
| } |
| |
| /* |
| * Single DMA data transfer |
| */ |
| |
| /* Multi block SDMA transfer */ |
| static void sdhci_sdma_transfer_multi_blocks(SDHCIState *s) |
| { |
| bool page_aligned = false; |
| unsigned int n, begin; |
| const uint16_t block_size = s->blksize & 0x0fff; |
| uint32_t boundary_chk = 1 << (((s->blksize & 0xf000) >> 12) + 12); |
| uint32_t boundary_count = boundary_chk - (s->sdmasysad % boundary_chk); |
| |
| /* XXX: Some sd/mmc drivers (for example, u-boot-slp) do not account for |
| * possible stop at page boundary if initial address is not page aligned, |
| * allow them to work properly */ |
| if ((s->sdmasysad % boundary_chk) == 0) { |
| page_aligned = true; |
| } |
| |
| if (s->trnmod & SDHC_TRNS_READ) { |
| s->prnsts |= SDHC_DOING_READ | SDHC_DATA_INHIBIT | |
| SDHC_DAT_LINE_ACTIVE; |
| while (s->blkcnt) { |
| if (s->data_count == 0) { |
| for (n = 0; n < block_size; n++) { |
| s->fifo_buffer[n] = sd_read_data(s->card); |
| } |
| } |
| begin = s->data_count; |
| if (((boundary_count + begin) < block_size) && page_aligned) { |
| s->data_count = boundary_count + begin; |
| boundary_count = 0; |
| } else { |
| s->data_count = block_size; |
| boundary_count -= block_size - begin; |
| if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { |
| s->blkcnt--; |
| } |
| } |
| dma_memory_write(&address_space_memory, s->sdmasysad, |
| &s->fifo_buffer[begin], s->data_count - begin); |
| s->sdmasysad += s->data_count - begin; |
| if (s->data_count == block_size) { |
| s->data_count = 0; |
| } |
| if (page_aligned && boundary_count == 0) { |
| break; |
| } |
| } |
| } else { |
| s->prnsts |= SDHC_DOING_WRITE | SDHC_DATA_INHIBIT | |
| SDHC_DAT_LINE_ACTIVE; |
| while (s->blkcnt) { |
| begin = s->data_count; |
| if (((boundary_count + begin) < block_size) && page_aligned) { |
| s->data_count = boundary_count + begin; |
| boundary_count = 0; |
| } else { |
| s->data_count = block_size; |
| boundary_count -= block_size - begin; |
| } |
| dma_memory_read(&address_space_memory, s->sdmasysad, |
| &s->fifo_buffer[begin], s->data_count); |
| s->sdmasysad += s->data_count - begin; |
| if (s->data_count == block_size) { |
| for (n = 0; n < block_size; n++) { |
| sd_write_data(s->card, s->fifo_buffer[n]); |
| } |
| s->data_count = 0; |
| if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { |
| s->blkcnt--; |
| } |
| } |
| if (page_aligned && boundary_count == 0) { |
| break; |
| } |
| } |
| } |
| |
| if (s->blkcnt == 0) { |
| SDHCI_GET_CLASS(s)->end_data_transfer(s); |
| } else { |
| if (s->norintstsen & SDHC_NISEN_DMA) { |
| s->norintsts |= SDHC_NIS_DMA; |
| } |
| sdhci_update_irq(s); |
| } |
| } |
| |
| /* single block SDMA transfer */ |
| |
| static void sdhci_sdma_transfer_single_block(SDHCIState *s) |
| { |
| int n; |
| uint32_t datacnt = s->blksize & 0x0fff; |
| |
| if (s->trnmod & SDHC_TRNS_READ) { |
| for (n = 0; n < datacnt; n++) { |
| s->fifo_buffer[n] = sd_read_data(s->card); |
| } |
| dma_memory_write(&address_space_memory, s->sdmasysad, s->fifo_buffer, |
| datacnt); |
| } else { |
| dma_memory_read(&address_space_memory, s->sdmasysad, s->fifo_buffer, |
| datacnt); |
| for (n = 0; n < datacnt; n++) { |
| sd_write_data(s->card, s->fifo_buffer[n]); |
| } |
| } |
| |
| if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { |
| s->blkcnt--; |
| } |
| |
| SDHCI_GET_CLASS(s)->end_data_transfer(s); |
| } |
| |
| typedef struct ADMADescr { |
| hwaddr addr; |
| uint16_t length; |
| uint8_t attr; |
| uint8_t incr; |
| } ADMADescr; |
| |
| static void get_adma_description(SDHCIState *s, ADMADescr *dscr) |
| { |
| uint32_t adma1 = 0; |
| uint64_t adma2 = 0; |
| hwaddr entry_addr = (hwaddr)s->admasysaddr; |
| switch (SDHC_DMA_TYPE(s->hostctl)) { |
| case SDHC_CTRL_ADMA2_32: |
| dma_memory_read(&address_space_memory, entry_addr, (uint8_t *)&adma2, |
| sizeof(adma2)); |
| adma2 = le64_to_cpu(adma2); |
| /* The spec does not specify endianness of descriptor table. |
| * We currently assume that it is LE. |
| */ |
| dscr->addr = (hwaddr)extract64(adma2, 32, 32) & ~0x3ull; |
| dscr->length = (uint16_t)extract64(adma2, 16, 16); |
| dscr->attr = (uint8_t)extract64(adma2, 0, 7); |
| dscr->incr = 8; |
| break; |
| case SDHC_CTRL_ADMA1_32: |
| dma_memory_read(&address_space_memory, entry_addr, (uint8_t *)&adma1, |
| sizeof(adma1)); |
| adma1 = le32_to_cpu(adma1); |
| dscr->addr = (hwaddr)(adma1 & 0xFFFFF000); |
| dscr->attr = (uint8_t)extract32(adma1, 0, 7); |
| dscr->incr = 4; |
| if ((dscr->attr & SDHC_ADMA_ATTR_ACT_MASK) == SDHC_ADMA_ATTR_SET_LEN) { |
| dscr->length = (uint16_t)extract32(adma1, 12, 16); |
| } else { |
| dscr->length = 4096; |
| } |
| break; |
| case SDHC_CTRL_ADMA2_64: |
| dma_memory_read(&address_space_memory, entry_addr, |
| (uint8_t *)(&dscr->attr), 1); |
| dma_memory_read(&address_space_memory, entry_addr + 2, |
| (uint8_t *)(&dscr->length), 2); |
| dscr->length = le16_to_cpu(dscr->length); |
| dma_memory_read(&address_space_memory, entry_addr + 4, |
| (uint8_t *)(&dscr->addr), 8); |
| dscr->attr = le64_to_cpu(dscr->attr); |
| dscr->attr &= 0xfffffff8; |
| dscr->incr = 12; |
| break; |
| } |
| } |
| |
| /* Advanced DMA data transfer */ |
| |
| static void sdhci_do_adma(SDHCIState *s) |
| { |
| unsigned int n, begin, length; |
| const uint16_t block_size = s->blksize & 0x0fff; |
| ADMADescr dscr; |
| int i; |
| |
| for (i = 0; i < SDHC_ADMA_DESCS_PER_DELAY; ++i) { |
| s->admaerr &= ~SDHC_ADMAERR_LENGTH_MISMATCH; |
| |
| get_adma_description(s, &dscr); |
| DPRINT_L2("ADMA loop: addr=" TARGET_FMT_plx ", len=%d, attr=%x\n", |
| dscr.addr, dscr.length, dscr.attr); |
| |
| if ((dscr.attr & SDHC_ADMA_ATTR_VALID) == 0) { |
| /* Indicate that error occurred in ST_FDS state */ |
| s->admaerr &= ~SDHC_ADMAERR_STATE_MASK; |
| s->admaerr |= SDHC_ADMAERR_STATE_ST_FDS; |
| |
| /* Generate ADMA error interrupt */ |
| if (s->errintstsen & SDHC_EISEN_ADMAERR) { |
| s->errintsts |= SDHC_EIS_ADMAERR; |
| s->norintsts |= SDHC_NIS_ERR; |
| } |
| |
| sdhci_update_irq(s); |
| return; |
| } |
| |
| length = dscr.length ? dscr.length : 65536; |
| |
| switch (dscr.attr & SDHC_ADMA_ATTR_ACT_MASK) { |
| case SDHC_ADMA_ATTR_ACT_TRAN: /* data transfer */ |
| |
| if (s->trnmod & SDHC_TRNS_READ) { |
| while (length) { |
| if (s->data_count == 0) { |
| for (n = 0; n < block_size; n++) { |
| s->fifo_buffer[n] = sd_read_data(s->card); |
| } |
| } |
| begin = s->data_count; |
| if ((length + begin) < block_size) { |
| s->data_count = length + begin; |
| length = 0; |
| } else { |
| s->data_count = block_size; |
| length -= block_size - begin; |
| } |
| dma_memory_write(&address_space_memory, dscr.addr, |
| &s->fifo_buffer[begin], |
| s->data_count - begin); |
| dscr.addr += s->data_count - begin; |
| if (s->data_count == block_size) { |
| s->data_count = 0; |
| if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { |
| s->blkcnt--; |
| if (s->blkcnt == 0) { |
| break; |
| } |
| } |
| } |
| } |
| } else { |
| while (length) { |
| begin = s->data_count; |
| if ((length + begin) < block_size) { |
| s->data_count = length + begin; |
| length = 0; |
| } else { |
| s->data_count = block_size; |
| length -= block_size - begin; |
| } |
| dma_memory_read(&address_space_memory, dscr.addr, |
| &s->fifo_buffer[begin], s->data_count); |
| dscr.addr += s->data_count - begin; |
| if (s->data_count == block_size) { |
| for (n = 0; n < block_size; n++) { |
| sd_write_data(s->card, s->fifo_buffer[n]); |
| } |
| s->data_count = 0; |
| if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { |
| s->blkcnt--; |
| if (s->blkcnt == 0) { |
| break; |
| } |
| } |
| } |
| } |
| } |
| s->admasysaddr += dscr.incr; |
| break; |
| case SDHC_ADMA_ATTR_ACT_LINK: /* link to next descriptor table */ |
| s->admasysaddr = dscr.addr; |
| DPRINT_L1("ADMA link: admasysaddr=0x%lx\n", s->admasysaddr); |
| break; |
| default: |
| s->admasysaddr += dscr.incr; |
| break; |
| } |
| |
| if (dscr.attr & SDHC_ADMA_ATTR_INT) { |
| DPRINT_L1("ADMA interrupt: admasysaddr=0x%lx\n", s->admasysaddr); |
| if (s->norintstsen & SDHC_NISEN_DMA) { |
| s->norintsts |= SDHC_NIS_DMA; |
| } |
| |
| sdhci_update_irq(s); |
| } |
| |
| /* ADMA transfer terminates if blkcnt == 0 or by END attribute */ |
| if (((s->trnmod & SDHC_TRNS_BLK_CNT_EN) && |
| (s->blkcnt == 0)) || (dscr.attr & SDHC_ADMA_ATTR_END)) { |
| DPRINT_L2("ADMA transfer completed\n"); |
| if (length || ((dscr.attr & SDHC_ADMA_ATTR_END) && |
| (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && |
| s->blkcnt != 0)) { |
| ERRPRINT("SD/MMC host ADMA length mismatch\n"); |
| s->admaerr |= SDHC_ADMAERR_LENGTH_MISMATCH | |
| SDHC_ADMAERR_STATE_ST_TFR; |
| if (s->errintstsen & SDHC_EISEN_ADMAERR) { |
| ERRPRINT("Set ADMA error flag\n"); |
| s->errintsts |= SDHC_EIS_ADMAERR; |
| s->norintsts |= SDHC_NIS_ERR; |
| } |
| |
| sdhci_update_irq(s); |
| } |
| SDHCI_GET_CLASS(s)->end_data_transfer(s); |
| return; |
| } |
| |
| } |
| |
| /* we have unfinished business - reschedule to continue ADMA */ |
| timer_mod(s->transfer_timer, |
| qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_TRANSFER_DELAY); |
| } |
| |
| /* Perform data transfer according to controller configuration */ |
| |
| static void sdhci_data_transfer(SDHCIState *s) |
| { |
| SDHCIClass *k = SDHCI_GET_CLASS(s); |
| |
| if (s->trnmod & SDHC_TRNS_DMA) { |
| switch (SDHC_DMA_TYPE(s->hostctl)) { |
| case SDHC_CTRL_SDMA: |
| if ((s->trnmod & SDHC_TRNS_MULTI) && |
| (!(s->trnmod & SDHC_TRNS_BLK_CNT_EN) || s->blkcnt == 0)) { |
| break; |
| } |
| |
| if ((s->blkcnt == 1) || !(s->trnmod & SDHC_TRNS_MULTI)) { |
| k->do_sdma_single(s); |
| } else { |
| k->do_sdma_multi(s); |
| } |
| |
| break; |
| case SDHC_CTRL_ADMA1_32: |
| if (!(s->capareg & SDHC_CAN_DO_ADMA1)) { |
| ERRPRINT("ADMA1 not supported\n"); |
| break; |
| } |
| |
| k->do_adma(s); |
| break; |
| case SDHC_CTRL_ADMA2_32: |
| if (!(s->capareg & SDHC_CAN_DO_ADMA2)) { |
| ERRPRINT("ADMA2 not supported\n"); |
| break; |
| } |
| |
| k->do_adma(s); |
| break; |
| case SDHC_CTRL_ADMA2_64: |
| if (!(s->capareg & SDHC_CAN_DO_ADMA2) || |
| !(s->capareg & SDHC_64_BIT_BUS_SUPPORT)) { |
| ERRPRINT("64 bit ADMA not supported\n"); |
| break; |
| } |
| |
| k->do_adma(s); |
| break; |
| default: |
| ERRPRINT("Unsupported DMA type\n"); |
| break; |
| } |
| } else { |
| if ((s->trnmod & SDHC_TRNS_READ) && sd_data_ready(s->card)) { |
| s->prnsts |= SDHC_DOING_READ | SDHC_DATA_INHIBIT | |
| SDHC_DAT_LINE_ACTIVE; |
| SDHCI_GET_CLASS(s)->read_block_from_card(s); |
| } else { |
| s->prnsts |= SDHC_DOING_WRITE | SDHC_DAT_LINE_ACTIVE | |
| SDHC_SPACE_AVAILABLE | SDHC_DATA_INHIBIT; |
| SDHCI_GET_CLASS(s)->write_block_to_card(s); |
| } |
| } |
| } |
| |
| static bool sdhci_can_issue_command(SDHCIState *s) |
| { |
| if (!SDHC_CLOCK_IS_ON(s->clkcon) || !(s->pwrcon & SDHC_POWER_ON) || |
| (((s->prnsts & SDHC_DATA_INHIBIT) || s->stopped_state) && |
| ((s->cmdreg & SDHC_CMD_DATA_PRESENT) || |
| ((s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY && |
| !(SDHC_COMMAND_TYPE(s->cmdreg) == SDHC_CMD_ABORT))))) { |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* The Buffer Data Port register must be accessed in sequential and |
| * continuous manner */ |
| static inline bool |
| sdhci_buff_access_is_sequential(SDHCIState *s, unsigned byte_num) |
| { |
| if ((s->data_count & 0x3) != byte_num) { |
| ERRPRINT("Non-sequential access to Buffer Data Port register" |
| "is prohibited\n"); |
| return false; |
| } |
| return true; |
| } |
| |
| static uint32_t sdhci_read(SDHCIState *s, unsigned int offset, unsigned size) |
| { |
| uint32_t ret = 0; |
| |
| switch (offset & ~0x3) { |
| case SDHC_SYSAD: |
| ret = s->sdmasysad; |
| break; |
| case SDHC_BLKSIZE: |
| ret = s->blksize | (s->blkcnt << 16); |
| break; |
| case SDHC_ARGUMENT: |
| ret = s->argument; |
| break; |
| case SDHC_TRNMOD: |
| ret = s->trnmod | (s->cmdreg << 16); |
| break; |
| case SDHC_RSPREG0 ... SDHC_RSPREG3: |
| ret = s->rspreg[((offset & ~0x3) - SDHC_RSPREG0) >> 2]; |
| break; |
| case SDHC_BDATA: |
| if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) { |
| ret = SDHCI_GET_CLASS(s)->bdata_read(s, size); |
| DPRINT_L2("read %ub: addr[0x%04x] -> %u(0x%x)\n", size, offset, |
| ret, ret); |
| return ret; |
| } |
| break; |
| case SDHC_PRNSTS: |
| ret = s->prnsts; |
| break; |
| case SDHC_HOSTCTL: |
| ret = s->hostctl | (s->pwrcon << 8) | (s->blkgap << 16) | |
| (s->wakcon << 24); |
| break; |
| case SDHC_CLKCON: |
| ret = s->clkcon | (s->timeoutcon << 16); |
| break; |
| case SDHC_NORINTSTS: |
| ret = s->norintsts | (s->errintsts << 16); |
| break; |
| case SDHC_NORINTSTSEN: |
| ret = s->norintstsen | (s->errintstsen << 16); |
| break; |
| case SDHC_NORINTSIGEN: |
| ret = s->norintsigen | (s->errintsigen << 16); |
| break; |
| case SDHC_ACMD12ERRSTS: |
| ret = s->acmd12errsts; |
| break; |
| case SDHC_CAPAREG: |
| ret = s->capareg; |
| break; |
| case SDHC_MAXCURR: |
| ret = s->maxcurr; |
| break; |
| case SDHC_ADMAERR: |
| ret = s->admaerr; |
| break; |
| case SDHC_ADMASYSADDR: |
| ret = (uint32_t)s->admasysaddr; |
| break; |
| case SDHC_ADMASYSADDR + 4: |
| ret = (uint32_t)(s->admasysaddr >> 32); |
| break; |
| case SDHC_SLOT_INT_STATUS: |
| ret = (SD_HOST_SPECv2_VERS << 16) | sdhci_slotint(s); |
| break; |
| default: |
| ERRPRINT("bad %ub read: addr[0x%04x]\n", size, offset); |
| break; |
| } |
| |
| ret >>= (offset & 0x3) * 8; |
| ret &= (1ULL << (size * 8)) - 1; |
| DPRINT_L2("read %ub: addr[0x%04x] -> %u(0x%x)\n", size, offset, ret, ret); |
| return ret; |
| } |
| |
| static inline void sdhci_blkgap_write(SDHCIState *s, uint8_t value) |
| { |
| if ((value & SDHC_STOP_AT_GAP_REQ) && (s->blkgap & SDHC_STOP_AT_GAP_REQ)) { |
| return; |
| } |
| s->blkgap = value & SDHC_STOP_AT_GAP_REQ; |
| |
| if ((value & SDHC_CONTINUE_REQ) && s->stopped_state && |
| (s->blkgap & SDHC_STOP_AT_GAP_REQ) == 0) { |
| if (s->stopped_state == sdhc_gap_read) { |
| s->prnsts |= SDHC_DAT_LINE_ACTIVE | SDHC_DOING_READ; |
| SDHCI_GET_CLASS(s)->read_block_from_card(s); |
| } else { |
| s->prnsts |= SDHC_DAT_LINE_ACTIVE | SDHC_DOING_WRITE; |
| SDHCI_GET_CLASS(s)->write_block_to_card(s); |
| } |
| s->stopped_state = sdhc_not_stopped; |
| } else if (!s->stopped_state && (value & SDHC_STOP_AT_GAP_REQ)) { |
| if (s->prnsts & SDHC_DOING_READ) { |
| s->stopped_state = sdhc_gap_read; |
| } else if (s->prnsts & SDHC_DOING_WRITE) { |
| s->stopped_state = sdhc_gap_write; |
| } |
| } |
| } |
| |
| static inline void sdhci_reset_write(SDHCIState *s, uint8_t value) |
| { |
| switch (value) { |
| case SDHC_RESET_ALL: |
| DEVICE_GET_CLASS(s)->reset(DEVICE(s)); |
| break; |
| case SDHC_RESET_CMD: |
| s->prnsts &= ~SDHC_CMD_INHIBIT; |
| s->norintsts &= ~SDHC_NIS_CMDCMP; |
| break; |
| case SDHC_RESET_DATA: |
| s->data_count = 0; |
| s->prnsts &= ~(SDHC_SPACE_AVAILABLE | SDHC_DATA_AVAILABLE | |
| SDHC_DOING_READ | SDHC_DOING_WRITE | |
| SDHC_DATA_INHIBIT | SDHC_DAT_LINE_ACTIVE); |
| s->blkgap &= ~(SDHC_STOP_AT_GAP_REQ | SDHC_CONTINUE_REQ); |
| s->stopped_state = sdhc_not_stopped; |
| s->norintsts &= ~(SDHC_NIS_WBUFRDY | SDHC_NIS_RBUFRDY | |
| SDHC_NIS_DMA | SDHC_NIS_TRSCMP | SDHC_NIS_BLKGAP); |
| break; |
| } |
| } |
| |
| static void |
| sdhci_write(SDHCIState *s, unsigned int offset, uint32_t value, unsigned size) |
| { |
| unsigned shift = 8 * (offset & 0x3); |
| uint32_t mask = ~(((1ULL << (size * 8)) - 1) << shift); |
| value <<= shift; |
| |
| switch (offset & ~0x3) { |
| case SDHC_SYSAD: |
| s->sdmasysad = (s->sdmasysad & mask) | value; |
| MASKED_WRITE(s->sdmasysad, mask, value); |
| /* Writing to last byte of sdmasysad might trigger transfer */ |
| if (!(mask & 0xFF000000) && TRANSFERRING_DATA(s->prnsts) && s->blkcnt && |
| s->blksize && SDHC_DMA_TYPE(s->hostctl) == SDHC_CTRL_SDMA) { |
| SDHCI_GET_CLASS(s)->do_sdma_multi(s); |
| } |
| break; |
| case SDHC_BLKSIZE: |
| if (!TRANSFERRING_DATA(s->prnsts)) { |
| MASKED_WRITE(s->blksize, mask, value); |
| MASKED_WRITE(s->blkcnt, mask >> 16, value >> 16); |
| } |
| break; |
| case SDHC_ARGUMENT: |
| MASKED_WRITE(s->argument, mask, value); |
| break; |
| case SDHC_TRNMOD: |
| /* DMA can be enabled only if it is supported as indicated by |
| * capabilities register */ |
| if (!(s->capareg & SDHC_CAN_DO_DMA)) { |
| value &= ~SDHC_TRNS_DMA; |
| } |
| MASKED_WRITE(s->trnmod, mask, value); |
| MASKED_WRITE(s->cmdreg, mask >> 16, value >> 16); |
| |
| /* Writing to the upper byte of CMDREG triggers SD command generation */ |
| if ((mask & 0xFF000000) || !SDHCI_GET_CLASS(s)->can_issue_command(s)) { |
| break; |
| } |
| |
| SDHCI_GET_CLASS(s)->send_command(s); |
| break; |
| case SDHC_BDATA: |
| if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) { |
| SDHCI_GET_CLASS(s)->bdata_write(s, value >> shift, size); |
| } |
| break; |
| case SDHC_HOSTCTL: |
| if (!(mask & 0xFF0000)) { |
| sdhci_blkgap_write(s, value >> 16); |
| } |
| MASKED_WRITE(s->hostctl, mask, value); |
| MASKED_WRITE(s->pwrcon, mask >> 8, value >> 8); |
| MASKED_WRITE(s->wakcon, mask >> 24, value >> 24); |
| if (!(s->prnsts & SDHC_CARD_PRESENT) || ((s->pwrcon >> 1) & 0x7) < 5 || |
| !(s->capareg & (1 << (31 - ((s->pwrcon >> 1) & 0x7))))) { |
| s->pwrcon &= ~SDHC_POWER_ON; |
| } |
| break; |
| case SDHC_CLKCON: |
| if (!(mask & 0xFF000000)) { |
| sdhci_reset_write(s, value >> 24); |
| } |
| MASKED_WRITE(s->clkcon, mask, value); |
| MASKED_WRITE(s->timeoutcon, mask >> 16, value >> 16); |
| if (s->clkcon & SDHC_CLOCK_INT_EN) { |
| s->clkcon |= SDHC_CLOCK_INT_STABLE; |
| } else { |
| s->clkcon &= ~SDHC_CLOCK_INT_STABLE; |
| } |
| break; |
| case SDHC_NORINTSTS: |
| if (s->norintstsen & SDHC_NISEN_CARDINT) { |
| value &= ~SDHC_NIS_CARDINT; |
| } |
| s->norintsts &= mask | ~value; |
| s->errintsts &= (mask >> 16) | ~(value >> 16); |
| if (s->errintsts) { |
| s->norintsts |= SDHC_NIS_ERR; |
| } else { |
| s->norintsts &= ~SDHC_NIS_ERR; |
| } |
| sdhci_update_irq(s); |
| break; |
| case SDHC_NORINTSTSEN: |
| MASKED_WRITE(s->norintstsen, mask, value); |
| MASKED_WRITE(s->errintstsen, mask >> 16, value >> 16); |
| s->norintsts &= s->norintstsen; |
| s->errintsts &= s->errintstsen; |
| if (s->errintsts) { |
| s->norintsts |= SDHC_NIS_ERR; |
| } else { |
| s->norintsts &= ~SDHC_NIS_ERR; |
| } |
| sdhci_update_irq(s); |
| break; |
| case SDHC_NORINTSIGEN: |
| MASKED_WRITE(s->norintsigen, mask, value); |
| MASKED_WRITE(s->errintsigen, mask >> 16, value >> 16); |
| sdhci_update_irq(s); |
| break; |
| case SDHC_ADMAERR: |
| MASKED_WRITE(s->admaerr, mask, value); |
| break; |
| case SDHC_ADMASYSADDR: |
| s->admasysaddr = (s->admasysaddr & (0xFFFFFFFF00000000ULL | |
| (uint64_t)mask)) | (uint64_t)value; |
| break; |
| case SDHC_ADMASYSADDR + 4: |
| s->admasysaddr = (s->admasysaddr & (0x00000000FFFFFFFFULL | |
| ((uint64_t)mask << 32))) | ((uint64_t)value << 32); |
| break; |
| case SDHC_FEAER: |
| s->acmd12errsts |= value; |
| s->errintsts |= (value >> 16) & s->errintstsen; |
| if (s->acmd12errsts) { |
| s->errintsts |= SDHC_EIS_CMD12ERR; |
| } |
| if (s->errintsts) { |
| s->norintsts |= SDHC_NIS_ERR; |
| } |
| sdhci_update_irq(s); |
| break; |
| default: |
| ERRPRINT("bad %ub write offset: addr[0x%04x] <- %u(0x%x)\n", |
| size, offset, value >> shift, value >> shift); |
| break; |
| } |
| DPRINT_L2("write %ub: addr[0x%04x] <- %u(0x%x)\n", |
| size, offset, value >> shift, value >> shift); |
| } |
| |
| static uint64_t |
| sdhci_readfn(void *opaque, hwaddr offset, unsigned size) |
| { |
| SDHCIState *s = (SDHCIState *)opaque; |
| |
| return SDHCI_GET_CLASS(s)->mem_read(s, offset, size); |
| } |
| |
| static void |
| sdhci_writefn(void *opaque, hwaddr off, uint64_t val, unsigned sz) |
| { |
| SDHCIState *s = (SDHCIState *)opaque; |
| |
| SDHCI_GET_CLASS(s)->mem_write(s, off, val, sz); |
| } |
| |
| static const MemoryRegionOps sdhci_mmio_ops = { |
| .read = sdhci_readfn, |
| .write = sdhci_writefn, |
| .valid = { |
| .min_access_size = 1, |
| .max_access_size = 4, |
| .unaligned = false |
| }, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| static inline unsigned int sdhci_get_fifolen(SDHCIState *s) |
| { |
| switch (SDHC_CAPAB_BLOCKSIZE(s->capareg)) { |
| case 0: |
| return 512; |
| case 1: |
| return 1024; |
| case 2: |
| return 2048; |
| default: |
| hw_error("SDHC: unsupported value for maximum block size\n"); |
| return 0; |
| } |
| } |
| |
| static void sdhci_initfn(Object *obj) |
| { |
| SDHCIState *s = SDHCI(obj); |
| DriveInfo *di; |
| |
| di = drive_get_next(IF_SD); |
| s->card = sd_init(di ? di->bdrv : NULL, false); |
| if (s->card == NULL) { |
| exit(1); |
| } |
| s->eject_cb = qemu_allocate_irqs(sdhci_insert_eject_cb, s, 1)[0]; |
| s->ro_cb = qemu_allocate_irqs(sdhci_card_readonly_cb, s, 1)[0]; |
| sd_set_cb(s->card, s->ro_cb, s->eject_cb); |
| |
| s->insert_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_raise_insertion_irq, s); |
| s->transfer_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_do_data_transfer, s); |
| } |
| |
| static void sdhci_uninitfn(Object *obj) |
| { |
| SDHCIState *s = SDHCI(obj); |
| |
| timer_del(s->insert_timer); |
| timer_free(s->insert_timer); |
| timer_del(s->transfer_timer); |
| timer_free(s->transfer_timer); |
| qemu_free_irqs(&s->eject_cb); |
| qemu_free_irqs(&s->ro_cb); |
| |
| if (s->fifo_buffer) { |
| g_free(s->fifo_buffer); |
| s->fifo_buffer = NULL; |
| } |
| } |
| |
| const VMStateDescription sdhci_vmstate = { |
| .name = "sdhci", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(sdmasysad, SDHCIState), |
| VMSTATE_UINT16(blksize, SDHCIState), |
| VMSTATE_UINT16(blkcnt, SDHCIState), |
| VMSTATE_UINT32(argument, SDHCIState), |
| VMSTATE_UINT16(trnmod, SDHCIState), |
| VMSTATE_UINT16(cmdreg, SDHCIState), |
| VMSTATE_UINT32_ARRAY(rspreg, SDHCIState, 4), |
| VMSTATE_UINT32(prnsts, SDHCIState), |
| VMSTATE_UINT8(hostctl, SDHCIState), |
| VMSTATE_UINT8(pwrcon, SDHCIState), |
| VMSTATE_UINT8(blkgap, SDHCIState), |
| VMSTATE_UINT8(wakcon, SDHCIState), |
| VMSTATE_UINT16(clkcon, SDHCIState), |
| VMSTATE_UINT8(timeoutcon, SDHCIState), |
| VMSTATE_UINT8(admaerr, SDHCIState), |
| VMSTATE_UINT16(norintsts, SDHCIState), |
| VMSTATE_UINT16(errintsts, SDHCIState), |
| VMSTATE_UINT16(norintstsen, SDHCIState), |
| VMSTATE_UINT16(errintstsen, SDHCIState), |
| VMSTATE_UINT16(norintsigen, SDHCIState), |
| VMSTATE_UINT16(errintsigen, SDHCIState), |
| VMSTATE_UINT16(acmd12errsts, SDHCIState), |
| VMSTATE_UINT16(data_count, SDHCIState), |
| VMSTATE_UINT64(admasysaddr, SDHCIState), |
| VMSTATE_UINT8(stopped_state, SDHCIState), |
| VMSTATE_VBUFFER_UINT32(fifo_buffer, SDHCIState, 1, NULL, 0, buf_maxsz), |
| VMSTATE_TIMER(insert_timer, SDHCIState), |
| VMSTATE_TIMER(transfer_timer, SDHCIState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| /* Capabilities registers provide information on supported features of this |
| * specific host controller implementation */ |
| static Property sdhci_properties[] = { |
| DEFINE_PROP_UINT32("capareg", SDHCIState, capareg, |
| SDHC_CAPAB_REG_DEFAULT), |
| DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void sdhci_realize(DeviceState *dev, Error ** errp) |
| { |
| SDHCIState *s = SDHCI(dev); |
| SysBusDevice *sbd = SYS_BUS_DEVICE(dev); |
| |
| s->buf_maxsz = sdhci_get_fifolen(s); |
| s->fifo_buffer = g_malloc0(s->buf_maxsz); |
| sysbus_init_irq(sbd, &s->irq); |
| memory_region_init_io(&s->iomem, OBJECT(s), &sdhci_mmio_ops, s, "sdhci", |
| SDHC_REGISTERS_MAP_SIZE); |
| sysbus_init_mmio(sbd, &s->iomem); |
| } |
| |
| static void sdhci_generic_reset(DeviceState *ds) |
| { |
| SDHCIState *s = SDHCI(ds); |
| SDHCI_GET_CLASS(s)->reset(s); |
| } |
| |
| static void sdhci_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| SDHCIClass *k = SDHCI_CLASS(klass); |
| |
| dc->vmsd = &sdhci_vmstate; |
| dc->props = sdhci_properties; |
| dc->reset = sdhci_generic_reset; |
| dc->realize = sdhci_realize; |
| |
| k->reset = sdhci_reset; |
| k->mem_read = sdhci_read; |
| k->mem_write = sdhci_write; |
| k->send_command = sdhci_send_command; |
| k->can_issue_command = sdhci_can_issue_command; |
| k->data_transfer = sdhci_data_transfer; |
| k->end_data_transfer = sdhci_end_transfer; |
| k->do_sdma_single = sdhci_sdma_transfer_single_block; |
| k->do_sdma_multi = sdhci_sdma_transfer_multi_blocks; |
| k->do_adma = sdhci_do_adma; |
| k->read_block_from_card = sdhci_read_block_from_card; |
| k->write_block_to_card = sdhci_write_block_to_card; |
| k->bdata_read = sdhci_read_dataport; |
| k->bdata_write = sdhci_write_dataport; |
| } |
| |
| static const TypeInfo sdhci_type_info = { |
| .name = TYPE_SDHCI, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(SDHCIState), |
| .instance_init = sdhci_initfn, |
| .instance_finalize = sdhci_uninitfn, |
| .class_init = sdhci_class_init, |
| .class_size = sizeof(SDHCIClass) |
| }; |
| |
| static void sdhci_register_types(void) |
| { |
| type_register_static(&sdhci_type_info); |
| } |
| |
| type_init(sdhci_register_types) |