| /* |
| * MSI-X device support |
| * |
| * This module includes support for MSI-X in pci devices. |
| * |
| * Author: Michael S. Tsirkin <mst@redhat.com> |
| * |
| * Copyright (c) 2009, Red Hat Inc, Michael S. Tsirkin (mst@redhat.com) |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2. See |
| * the COPYING file in the top-level directory. |
| */ |
| |
| #include "hw.h" |
| #include "msix.h" |
| #include "pci.h" |
| #include "range.h" |
| |
| /* MSI-X capability structure */ |
| #define MSIX_TABLE_OFFSET 4 |
| #define MSIX_PBA_OFFSET 8 |
| #define MSIX_CAP_LENGTH 12 |
| |
| /* MSI enable bit and maskall bit are in byte 1 in FLAGS register */ |
| #define MSIX_CONTROL_OFFSET (PCI_MSIX_FLAGS + 1) |
| #define MSIX_ENABLE_MASK (PCI_MSIX_FLAGS_ENABLE >> 8) |
| #define MSIX_MASKALL_MASK (PCI_MSIX_FLAGS_MASKALL >> 8) |
| |
| /* MSI-X table format */ |
| #define MSIX_MSG_ADDR 0 |
| #define MSIX_MSG_UPPER_ADDR 4 |
| #define MSIX_MSG_DATA 8 |
| #define MSIX_VECTOR_CTRL 12 |
| #define MSIX_ENTRY_SIZE 16 |
| #define MSIX_VECTOR_MASK 0x1 |
| |
| /* How much space does an MSIX table need. */ |
| /* The spec requires giving the table structure |
| * a 4K aligned region all by itself. */ |
| #define MSIX_PAGE_SIZE 0x1000 |
| /* Reserve second half of the page for pending bits */ |
| #define MSIX_PAGE_PENDING (MSIX_PAGE_SIZE / 2) |
| #define MSIX_MAX_ENTRIES 32 |
| |
| |
| /* Flag for interrupt controller to declare MSI-X support */ |
| int msix_supported; |
| |
| /* Add MSI-X capability to the config space for the device. */ |
| /* Given a bar and its size, add MSI-X table on top of it |
| * and fill MSI-X capability in the config space. |
| * Original bar size must be a power of 2 or 0. |
| * New bar size is returned. */ |
| static int msix_add_config(struct PCIDevice *pdev, unsigned short nentries, |
| unsigned bar_nr, unsigned bar_size) |
| { |
| int config_offset; |
| uint8_t *config; |
| uint32_t new_size; |
| |
| if (nentries < 1 || nentries > PCI_MSIX_FLAGS_QSIZE + 1) |
| return -EINVAL; |
| if (bar_size > 0x80000000) |
| return -ENOSPC; |
| |
| /* Add space for MSI-X structures */ |
| if (!bar_size) { |
| new_size = MSIX_PAGE_SIZE; |
| } else if (bar_size < MSIX_PAGE_SIZE) { |
| bar_size = MSIX_PAGE_SIZE; |
| new_size = MSIX_PAGE_SIZE * 2; |
| } else { |
| new_size = bar_size * 2; |
| } |
| |
| pdev->msix_bar_size = new_size; |
| config_offset = pci_add_capability(pdev, PCI_CAP_ID_MSIX, |
| 0, MSIX_CAP_LENGTH); |
| if (config_offset < 0) |
| return config_offset; |
| config = pdev->config + config_offset; |
| |
| pci_set_word(config + PCI_MSIX_FLAGS, nentries - 1); |
| /* Table on top of BAR */ |
| pci_set_long(config + MSIX_TABLE_OFFSET, bar_size | bar_nr); |
| /* Pending bits on top of that */ |
| pci_set_long(config + MSIX_PBA_OFFSET, (bar_size + MSIX_PAGE_PENDING) | |
| bar_nr); |
| pdev->msix_cap = config_offset; |
| /* Make flags bit writeable. */ |
| pdev->wmask[config_offset + MSIX_CONTROL_OFFSET] |= MSIX_ENABLE_MASK | |
| MSIX_MASKALL_MASK; |
| return 0; |
| } |
| |
| static uint32_t msix_mmio_readl(void *opaque, target_phys_addr_t addr) |
| { |
| PCIDevice *dev = opaque; |
| unsigned int offset = addr & (MSIX_PAGE_SIZE - 1) & ~0x3; |
| void *page = dev->msix_table_page; |
| |
| return pci_get_long(page + offset); |
| } |
| |
| static uint32_t msix_mmio_read_unallowed(void *opaque, target_phys_addr_t addr) |
| { |
| fprintf(stderr, "MSI-X: only dword read is allowed!\n"); |
| return 0; |
| } |
| |
| static uint8_t msix_pending_mask(int vector) |
| { |
| return 1 << (vector % 8); |
| } |
| |
| static uint8_t *msix_pending_byte(PCIDevice *dev, int vector) |
| { |
| return dev->msix_table_page + MSIX_PAGE_PENDING + vector / 8; |
| } |
| |
| static int msix_is_pending(PCIDevice *dev, int vector) |
| { |
| return *msix_pending_byte(dev, vector) & msix_pending_mask(vector); |
| } |
| |
| static void msix_set_pending(PCIDevice *dev, int vector) |
| { |
| *msix_pending_byte(dev, vector) |= msix_pending_mask(vector); |
| } |
| |
| static void msix_clr_pending(PCIDevice *dev, int vector) |
| { |
| *msix_pending_byte(dev, vector) &= ~msix_pending_mask(vector); |
| } |
| |
| static int msix_function_masked(PCIDevice *dev) |
| { |
| return dev->config[dev->msix_cap + MSIX_CONTROL_OFFSET] & MSIX_MASKALL_MASK; |
| } |
| |
| static int msix_is_masked(PCIDevice *dev, int vector) |
| { |
| unsigned offset = vector * MSIX_ENTRY_SIZE + MSIX_VECTOR_CTRL; |
| return msix_function_masked(dev) || |
| dev->msix_table_page[offset] & MSIX_VECTOR_MASK; |
| } |
| |
| static void msix_handle_mask_update(PCIDevice *dev, int vector) |
| { |
| if (!msix_is_masked(dev, vector) && msix_is_pending(dev, vector)) { |
| msix_clr_pending(dev, vector); |
| msix_notify(dev, vector); |
| } |
| } |
| |
| /* Handle MSI-X capability config write. */ |
| void msix_write_config(PCIDevice *dev, uint32_t addr, |
| uint32_t val, int len) |
| { |
| unsigned enable_pos = dev->msix_cap + MSIX_CONTROL_OFFSET; |
| int vector; |
| |
| if (!range_covers_byte(addr, len, enable_pos)) { |
| return; |
| } |
| |
| if (!msix_enabled(dev)) { |
| return; |
| } |
| |
| pci_device_deassert_intx(dev); |
| |
| if (msix_function_masked(dev)) { |
| return; |
| } |
| |
| for (vector = 0; vector < dev->msix_entries_nr; ++vector) { |
| msix_handle_mask_update(dev, vector); |
| } |
| } |
| |
| static void msix_mmio_writel(void *opaque, target_phys_addr_t addr, |
| uint32_t val) |
| { |
| PCIDevice *dev = opaque; |
| unsigned int offset = addr & (MSIX_PAGE_SIZE - 1) & ~0x3; |
| int vector = offset / MSIX_ENTRY_SIZE; |
| pci_set_long(dev->msix_table_page + offset, val); |
| msix_handle_mask_update(dev, vector); |
| } |
| |
| static void msix_mmio_write_unallowed(void *opaque, target_phys_addr_t addr, |
| uint32_t val) |
| { |
| fprintf(stderr, "MSI-X: only dword write is allowed!\n"); |
| } |
| |
| static CPUWriteMemoryFunc * const msix_mmio_write[] = { |
| msix_mmio_write_unallowed, msix_mmio_write_unallowed, msix_mmio_writel |
| }; |
| |
| static CPUReadMemoryFunc * const msix_mmio_read[] = { |
| msix_mmio_read_unallowed, msix_mmio_read_unallowed, msix_mmio_readl |
| }; |
| |
| /* Should be called from device's map method. */ |
| void msix_mmio_map(PCIDevice *d, int region_num, |
| pcibus_t addr, pcibus_t size, int type) |
| { |
| uint8_t *config = d->config + d->msix_cap; |
| uint32_t table = pci_get_long(config + MSIX_TABLE_OFFSET); |
| uint32_t offset = table & ~(MSIX_PAGE_SIZE - 1); |
| /* TODO: for assigned devices, we'll want to make it possible to map |
| * pending bits separately in case they are in a separate bar. */ |
| int table_bir = table & PCI_MSIX_FLAGS_BIRMASK; |
| |
| if (table_bir != region_num) |
| return; |
| if (size <= offset) |
| return; |
| cpu_register_physical_memory(addr + offset, size - offset, |
| d->msix_mmio_index); |
| } |
| |
| static void msix_mask_all(struct PCIDevice *dev, unsigned nentries) |
| { |
| int vector; |
| for (vector = 0; vector < nentries; ++vector) { |
| unsigned offset = vector * MSIX_ENTRY_SIZE + MSIX_VECTOR_CTRL; |
| dev->msix_table_page[offset] |= MSIX_VECTOR_MASK; |
| } |
| } |
| |
| /* Initialize the MSI-X structures. Note: if MSI-X is supported, BAR size is |
| * modified, it should be retrieved with msix_bar_size. */ |
| int msix_init(struct PCIDevice *dev, unsigned short nentries, |
| unsigned bar_nr, unsigned bar_size) |
| { |
| int ret; |
| /* Nothing to do if MSI is not supported by interrupt controller */ |
| if (!msix_supported) |
| return -ENOTSUP; |
| |
| if (nentries > MSIX_MAX_ENTRIES) |
| return -EINVAL; |
| |
| dev->msix_entry_used = qemu_mallocz(MSIX_MAX_ENTRIES * |
| sizeof *dev->msix_entry_used); |
| |
| dev->msix_table_page = qemu_mallocz(MSIX_PAGE_SIZE); |
| msix_mask_all(dev, nentries); |
| |
| dev->msix_mmio_index = cpu_register_io_memory(msix_mmio_read, |
| msix_mmio_write, dev, |
| DEVICE_NATIVE_ENDIAN); |
| if (dev->msix_mmio_index == -1) { |
| ret = -EBUSY; |
| goto err_index; |
| } |
| |
| dev->msix_entries_nr = nentries; |
| ret = msix_add_config(dev, nentries, bar_nr, bar_size); |
| if (ret) |
| goto err_config; |
| |
| dev->cap_present |= QEMU_PCI_CAP_MSIX; |
| return 0; |
| |
| err_config: |
| dev->msix_entries_nr = 0; |
| cpu_unregister_io_memory(dev->msix_mmio_index); |
| err_index: |
| qemu_free(dev->msix_table_page); |
| dev->msix_table_page = NULL; |
| qemu_free(dev->msix_entry_used); |
| dev->msix_entry_used = NULL; |
| return ret; |
| } |
| |
| static void msix_free_irq_entries(PCIDevice *dev) |
| { |
| int vector; |
| |
| for (vector = 0; vector < dev->msix_entries_nr; ++vector) { |
| dev->msix_entry_used[vector] = 0; |
| msix_clr_pending(dev, vector); |
| } |
| } |
| |
| /* Clean up resources for the device. */ |
| int msix_uninit(PCIDevice *dev) |
| { |
| if (!(dev->cap_present & QEMU_PCI_CAP_MSIX)) |
| return 0; |
| pci_del_capability(dev, PCI_CAP_ID_MSIX, MSIX_CAP_LENGTH); |
| dev->msix_cap = 0; |
| msix_free_irq_entries(dev); |
| dev->msix_entries_nr = 0; |
| cpu_unregister_io_memory(dev->msix_mmio_index); |
| qemu_free(dev->msix_table_page); |
| dev->msix_table_page = NULL; |
| qemu_free(dev->msix_entry_used); |
| dev->msix_entry_used = NULL; |
| dev->cap_present &= ~QEMU_PCI_CAP_MSIX; |
| return 0; |
| } |
| |
| void msix_save(PCIDevice *dev, QEMUFile *f) |
| { |
| unsigned n = dev->msix_entries_nr; |
| |
| if (!(dev->cap_present & QEMU_PCI_CAP_MSIX)) { |
| return; |
| } |
| |
| qemu_put_buffer(f, dev->msix_table_page, n * MSIX_ENTRY_SIZE); |
| qemu_put_buffer(f, dev->msix_table_page + MSIX_PAGE_PENDING, (n + 7) / 8); |
| } |
| |
| /* Should be called after restoring the config space. */ |
| void msix_load(PCIDevice *dev, QEMUFile *f) |
| { |
| unsigned n = dev->msix_entries_nr; |
| |
| if (!(dev->cap_present & QEMU_PCI_CAP_MSIX)) { |
| return; |
| } |
| |
| msix_free_irq_entries(dev); |
| qemu_get_buffer(f, dev->msix_table_page, n * MSIX_ENTRY_SIZE); |
| qemu_get_buffer(f, dev->msix_table_page + MSIX_PAGE_PENDING, (n + 7) / 8); |
| } |
| |
| /* Does device support MSI-X? */ |
| int msix_present(PCIDevice *dev) |
| { |
| return dev->cap_present & QEMU_PCI_CAP_MSIX; |
| } |
| |
| /* Is MSI-X enabled? */ |
| int msix_enabled(PCIDevice *dev) |
| { |
| return (dev->cap_present & QEMU_PCI_CAP_MSIX) && |
| (dev->config[dev->msix_cap + MSIX_CONTROL_OFFSET] & |
| MSIX_ENABLE_MASK); |
| } |
| |
| /* Size of bar where MSI-X table resides, or 0 if MSI-X not supported. */ |
| uint32_t msix_bar_size(PCIDevice *dev) |
| { |
| return (dev->cap_present & QEMU_PCI_CAP_MSIX) ? |
| dev->msix_bar_size : 0; |
| } |
| |
| /* Send an MSI-X message */ |
| void msix_notify(PCIDevice *dev, unsigned vector) |
| { |
| uint8_t *table_entry = dev->msix_table_page + vector * MSIX_ENTRY_SIZE; |
| uint64_t address; |
| uint32_t data; |
| |
| if (vector >= dev->msix_entries_nr || !dev->msix_entry_used[vector]) |
| return; |
| if (msix_is_masked(dev, vector)) { |
| msix_set_pending(dev, vector); |
| return; |
| } |
| |
| address = pci_get_long(table_entry + MSIX_MSG_UPPER_ADDR); |
| address = (address << 32) | pci_get_long(table_entry + MSIX_MSG_ADDR); |
| data = pci_get_long(table_entry + MSIX_MSG_DATA); |
| stl_phys(address, data); |
| } |
| |
| void msix_reset(PCIDevice *dev) |
| { |
| if (!(dev->cap_present & QEMU_PCI_CAP_MSIX)) |
| return; |
| msix_free_irq_entries(dev); |
| dev->config[dev->msix_cap + MSIX_CONTROL_OFFSET] &= |
| ~dev->wmask[dev->msix_cap + MSIX_CONTROL_OFFSET]; |
| memset(dev->msix_table_page, 0, MSIX_PAGE_SIZE); |
| msix_mask_all(dev, dev->msix_entries_nr); |
| } |
| |
| /* PCI spec suggests that devices make it possible for software to configure |
| * less vectors than supported by the device, but does not specify a standard |
| * mechanism for devices to do so. |
| * |
| * We support this by asking devices to declare vectors software is going to |
| * actually use, and checking this on the notification path. Devices that |
| * don't want to follow the spec suggestion can declare all vectors as used. */ |
| |
| /* Mark vector as used. */ |
| int msix_vector_use(PCIDevice *dev, unsigned vector) |
| { |
| if (vector >= dev->msix_entries_nr) |
| return -EINVAL; |
| dev->msix_entry_used[vector]++; |
| return 0; |
| } |
| |
| /* Mark vector as unused. */ |
| void msix_vector_unuse(PCIDevice *dev, unsigned vector) |
| { |
| if (vector >= dev->msix_entries_nr || !dev->msix_entry_used[vector]) { |
| return; |
| } |
| if (--dev->msix_entry_used[vector]) { |
| return; |
| } |
| msix_clr_pending(dev, vector); |
| } |
| |
| void msix_unuse_all_vectors(PCIDevice *dev) |
| { |
| if (!(dev->cap_present & QEMU_PCI_CAP_MSIX)) |
| return; |
| msix_free_irq_entries(dev); |
| } |