| # -*- Mode: Python -*- |
| # |
| # QAPI Schema |
| |
| # QAPI common definitions |
| { 'include': 'qapi/common.json' } |
| |
| # QAPI block definitions |
| { 'include': 'qapi/block.json' } |
| |
| # QAPI event definitions |
| { 'include': 'qapi/event.json' } |
| |
| # Tracing commands |
| { 'include': 'qapi/trace.json' } |
| |
| ## |
| # LostTickPolicy: |
| # |
| # Policy for handling lost ticks in timer devices. |
| # |
| # @discard: throw away the missed tick(s) and continue with future injection |
| # normally. Guest time may be delayed, unless the OS has explicit |
| # handling of lost ticks |
| # |
| # @delay: continue to deliver ticks at the normal rate. Guest time will be |
| # delayed due to the late tick |
| # |
| # @merge: merge the missed tick(s) into one tick and inject. Guest time |
| # may be delayed, depending on how the OS reacts to the merging |
| # of ticks |
| # |
| # @slew: deliver ticks at a higher rate to catch up with the missed tick. The |
| # guest time should not be delayed once catchup is complete. |
| # |
| # Since: 2.0 |
| ## |
| { 'enum': 'LostTickPolicy', |
| 'data': ['discard', 'delay', 'merge', 'slew' ] } |
| |
| # @add_client |
| # |
| # Allow client connections for VNC, Spice and socket based |
| # character devices to be passed in to QEMU via SCM_RIGHTS. |
| # |
| # @protocol: protocol name. Valid names are "vnc", "spice" or the |
| # name of a character device (eg. from -chardev id=XXXX) |
| # |
| # @fdname: file descriptor name previously passed via 'getfd' command |
| # |
| # @skipauth: #optional whether to skip authentication. Only applies |
| # to "vnc" and "spice" protocols |
| # |
| # @tls: #optional whether to perform TLS. Only applies to the "spice" |
| # protocol |
| # |
| # Returns: nothing on success. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'add_client', |
| 'data': { 'protocol': 'str', 'fdname': 'str', '*skipauth': 'bool', |
| '*tls': 'bool' } } |
| |
| ## |
| # @NameInfo: |
| # |
| # Guest name information. |
| # |
| # @name: #optional The name of the guest |
| # |
| # Since 0.14.0 |
| ## |
| { 'type': 'NameInfo', 'data': {'*name': 'str'} } |
| |
| ## |
| # @query-name: |
| # |
| # Return the name information of a guest. |
| # |
| # Returns: @NameInfo of the guest |
| # |
| # Since 0.14.0 |
| ## |
| { 'command': 'query-name', 'returns': 'NameInfo' } |
| |
| ## |
| # @KvmInfo: |
| # |
| # Information about support for KVM acceleration |
| # |
| # @enabled: true if KVM acceleration is active |
| # |
| # @present: true if KVM acceleration is built into this executable |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'KvmInfo', 'data': {'enabled': 'bool', 'present': 'bool'} } |
| |
| ## |
| # @query-kvm: |
| # |
| # Returns information about KVM acceleration |
| # |
| # Returns: @KvmInfo |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-kvm', 'returns': 'KvmInfo' } |
| |
| ## |
| # @RunState |
| # |
| # An enumeration of VM run states. |
| # |
| # @debug: QEMU is running on a debugger |
| # |
| # @finish-migrate: guest is paused to finish the migration process |
| # |
| # @inmigrate: guest is paused waiting for an incoming migration. Note |
| # that this state does not tell whether the machine will start at the |
| # end of the migration. This depends on the command-line -S option and |
| # any invocation of 'stop' or 'cont' that has happened since QEMU was |
| # started. |
| # |
| # @internal-error: An internal error that prevents further guest execution |
| # has occurred |
| # |
| # @io-error: the last IOP has failed and the device is configured to pause |
| # on I/O errors |
| # |
| # @paused: guest has been paused via the 'stop' command |
| # |
| # @postmigrate: guest is paused following a successful 'migrate' |
| # |
| # @prelaunch: QEMU was started with -S and guest has not started |
| # |
| # @restore-vm: guest is paused to restore VM state |
| # |
| # @running: guest is actively running |
| # |
| # @save-vm: guest is paused to save the VM state |
| # |
| # @shutdown: guest is shut down (and -no-shutdown is in use) |
| # |
| # @suspended: guest is suspended (ACPI S3) |
| # |
| # @watchdog: the watchdog action is configured to pause and has been triggered |
| # |
| # @guest-panicked: guest has been panicked as a result of guest OS panic |
| ## |
| { 'enum': 'RunState', |
| 'data': [ 'debug', 'inmigrate', 'internal-error', 'io-error', 'paused', |
| 'postmigrate', 'prelaunch', 'finish-migrate', 'restore-vm', |
| 'running', 'save-vm', 'shutdown', 'suspended', 'watchdog', |
| 'guest-panicked' ] } |
| |
| ## |
| # @StatusInfo: |
| # |
| # Information about VCPU run state |
| # |
| # @running: true if all VCPUs are runnable, false if not runnable |
| # |
| # @singlestep: true if VCPUs are in single-step mode |
| # |
| # @status: the virtual machine @RunState |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: @singlestep is enabled through the GDB stub |
| ## |
| { 'type': 'StatusInfo', |
| 'data': {'running': 'bool', 'singlestep': 'bool', 'status': 'RunState'} } |
| |
| ## |
| # @query-status: |
| # |
| # Query the run status of all VCPUs |
| # |
| # Returns: @StatusInfo reflecting all VCPUs |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-status', 'returns': 'StatusInfo' } |
| |
| ## |
| # @UuidInfo: |
| # |
| # Guest UUID information. |
| # |
| # @UUID: the UUID of the guest |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: If no UUID was specified for the guest, a null UUID is returned. |
| ## |
| { 'type': 'UuidInfo', 'data': {'UUID': 'str'} } |
| |
| ## |
| # @query-uuid: |
| # |
| # Query the guest UUID information. |
| # |
| # Returns: The @UuidInfo for the guest |
| # |
| # Since 0.14.0 |
| ## |
| { 'command': 'query-uuid', 'returns': 'UuidInfo' } |
| |
| ## |
| # @ChardevInfo: |
| # |
| # Information about a character device. |
| # |
| # @label: the label of the character device |
| # |
| # @filename: the filename of the character device |
| # |
| # @frontend-open: shows whether the frontend device attached to this backend |
| # (eg. with the chardev=... option) is in open or closed state |
| # (since 2.1) |
| # |
| # Notes: @filename is encoded using the QEMU command line character device |
| # encoding. See the QEMU man page for details. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'ChardevInfo', 'data': {'label': 'str', |
| 'filename': 'str', |
| 'frontend-open': 'bool'} } |
| |
| ## |
| # @query-chardev: |
| # |
| # Returns information about current character devices. |
| # |
| # Returns: a list of @ChardevInfo |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-chardev', 'returns': ['ChardevInfo'] } |
| |
| ## |
| # @ChardevBackendInfo: |
| # |
| # Information about a character device backend |
| # |
| # @name: The backend name |
| # |
| # Since: 2.0 |
| ## |
| { 'type': 'ChardevBackendInfo', 'data': {'name': 'str'} } |
| |
| ## |
| # @query-chardev-backends: |
| # |
| # Returns information about character device backends. |
| # |
| # Returns: a list of @ChardevBackendInfo |
| # |
| # Since: 2.0 |
| ## |
| { 'command': 'query-chardev-backends', 'returns': ['ChardevBackendInfo'] } |
| |
| ## |
| # @DataFormat: |
| # |
| # An enumeration of data format. |
| # |
| # @utf8: Data is a UTF-8 string (RFC 3629) |
| # |
| # @base64: Data is Base64 encoded binary (RFC 3548) |
| # |
| # Since: 1.4 |
| ## |
| { 'enum': 'DataFormat', |
| 'data': [ 'utf8', 'base64' ] } |
| |
| ## |
| # @ringbuf-write: |
| # |
| # Write to a ring buffer character device. |
| # |
| # @device: the ring buffer character device name |
| # |
| # @data: data to write |
| # |
| # @format: #optional data encoding (default 'utf8'). |
| # - base64: data must be base64 encoded text. Its binary |
| # decoding gets written. |
| # Bug: invalid base64 is currently not rejected. |
| # Whitespace *is* invalid. |
| # - utf8: data's UTF-8 encoding is written |
| # - data itself is always Unicode regardless of format, like |
| # any other string. |
| # |
| # Returns: Nothing on success |
| # |
| # Since: 1.4 |
| ## |
| { 'command': 'ringbuf-write', |
| 'data': {'device': 'str', 'data': 'str', |
| '*format': 'DataFormat'} } |
| |
| ## |
| # @ringbuf-read: |
| # |
| # Read from a ring buffer character device. |
| # |
| # @device: the ring buffer character device name |
| # |
| # @size: how many bytes to read at most |
| # |
| # @format: #optional data encoding (default 'utf8'). |
| # - base64: the data read is returned in base64 encoding. |
| # - utf8: the data read is interpreted as UTF-8. |
| # Bug: can screw up when the buffer contains invalid UTF-8 |
| # sequences, NUL characters, after the ring buffer lost |
| # data, and when reading stops because the size limit is |
| # reached. |
| # - The return value is always Unicode regardless of format, |
| # like any other string. |
| # |
| # Returns: data read from the device |
| # |
| # Since: 1.4 |
| ## |
| { 'command': 'ringbuf-read', |
| 'data': {'device': 'str', 'size': 'int', '*format': 'DataFormat'}, |
| 'returns': 'str' } |
| |
| ## |
| # @EventInfo: |
| # |
| # Information about a QMP event |
| # |
| # @name: The event name |
| # |
| # Since: 1.2.0 |
| ## |
| { 'type': 'EventInfo', 'data': {'name': 'str'} } |
| |
| ## |
| # @query-events: |
| # |
| # Return a list of supported QMP events by this server |
| # |
| # Returns: A list of @EventInfo for all supported events |
| # |
| # Since: 1.2.0 |
| ## |
| { 'command': 'query-events', 'returns': ['EventInfo'] } |
| |
| ## |
| # @MigrationStats |
| # |
| # Detailed migration status. |
| # |
| # @transferred: amount of bytes already transferred to the target VM |
| # |
| # @remaining: amount of bytes remaining to be transferred to the target VM |
| # |
| # @total: total amount of bytes involved in the migration process |
| # |
| # @duplicate: number of duplicate (zero) pages (since 1.2) |
| # |
| # @skipped: number of skipped zero pages (since 1.5) |
| # |
| # @normal : number of normal pages (since 1.2) |
| # |
| # @normal-bytes: number of normal bytes sent (since 1.2) |
| # |
| # @dirty-pages-rate: number of pages dirtied by second by the |
| # guest (since 1.3) |
| # |
| # @mbps: throughput in megabits/sec. (since 1.6) |
| # |
| # @dirty-sync-count: number of times that dirty ram was synchronized (since 2.1) |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'MigrationStats', |
| 'data': {'transferred': 'int', 'remaining': 'int', 'total': 'int' , |
| 'duplicate': 'int', 'skipped': 'int', 'normal': 'int', |
| 'normal-bytes': 'int', 'dirty-pages-rate' : 'int', |
| 'mbps' : 'number', 'dirty-sync-count' : 'int' } } |
| |
| ## |
| # @XBZRLECacheStats |
| # |
| # Detailed XBZRLE migration cache statistics |
| # |
| # @cache-size: XBZRLE cache size |
| # |
| # @bytes: amount of bytes already transferred to the target VM |
| # |
| # @pages: amount of pages transferred to the target VM |
| # |
| # @cache-miss: number of cache miss |
| # |
| # @cache-miss-rate: rate of cache miss (since 2.1) |
| # |
| # @overflow: number of overflows |
| # |
| # Since: 1.2 |
| ## |
| { 'type': 'XBZRLECacheStats', |
| 'data': {'cache-size': 'int', 'bytes': 'int', 'pages': 'int', |
| 'cache-miss': 'int', 'cache-miss-rate': 'number', |
| 'overflow': 'int' } } |
| |
| ## |
| # @MigrationInfo |
| # |
| # Information about current migration process. |
| # |
| # @status: #optional string describing the current migration status. |
| # As of 0.14.0 this can be 'setup', 'active', 'completed', 'failed' or |
| # 'cancelled'. If this field is not returned, no migration process |
| # has been initiated |
| # |
| # @ram: #optional @MigrationStats containing detailed migration |
| # status, only returned if status is 'active' or |
| # 'completed'. 'comppleted' (since 1.2) |
| # |
| # @disk: #optional @MigrationStats containing detailed disk migration |
| # status, only returned if status is 'active' and it is a block |
| # migration |
| # |
| # @xbzrle-cache: #optional @XBZRLECacheStats containing detailed XBZRLE |
| # migration statistics, only returned if XBZRLE feature is on and |
| # status is 'active' or 'completed' (since 1.2) |
| # |
| # @total-time: #optional total amount of milliseconds since migration started. |
| # If migration has ended, it returns the total migration |
| # time. (since 1.2) |
| # |
| # @downtime: #optional only present when migration finishes correctly |
| # total downtime in milliseconds for the guest. |
| # (since 1.3) |
| # |
| # @expected-downtime: #optional only present while migration is active |
| # expected downtime in milliseconds for the guest in last walk |
| # of the dirty bitmap. (since 1.3) |
| # |
| # @setup-time: #optional amount of setup time in milliseconds _before_ the |
| # iterations begin but _after_ the QMP command is issued. This is designed |
| # to provide an accounting of any activities (such as RDMA pinning) which |
| # may be expensive, but do not actually occur during the iterative |
| # migration rounds themselves. (since 1.6) |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'MigrationInfo', |
| 'data': {'*status': 'str', '*ram': 'MigrationStats', |
| '*disk': 'MigrationStats', |
| '*xbzrle-cache': 'XBZRLECacheStats', |
| '*total-time': 'int', |
| '*expected-downtime': 'int', |
| '*downtime': 'int', |
| '*setup-time': 'int'} } |
| |
| ## |
| # @query-migrate |
| # |
| # Returns information about current migration process. |
| # |
| # Returns: @MigrationInfo |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-migrate', 'returns': 'MigrationInfo' } |
| |
| ## |
| # @MigrationCapability |
| # |
| # Migration capabilities enumeration |
| # |
| # @xbzrle: Migration supports xbzrle (Xor Based Zero Run Length Encoding). |
| # This feature allows us to minimize migration traffic for certain work |
| # loads, by sending compressed difference of the pages |
| # |
| # @rdma-pin-all: Controls whether or not the entire VM memory footprint is |
| # mlock()'d on demand or all at once. Refer to docs/rdma.txt for usage. |
| # Disabled by default. (since 2.0) |
| # |
| # @zero-blocks: During storage migration encode blocks of zeroes efficiently. This |
| # essentially saves 1MB of zeroes per block on the wire. Enabling requires |
| # source and target VM to support this feature. To enable it is sufficient |
| # to enable the capability on the source VM. The feature is disabled by |
| # default. (since 1.6) |
| # |
| # @auto-converge: If enabled, QEMU will automatically throttle down the guest |
| # to speed up convergence of RAM migration. (since 1.6) |
| # |
| # Since: 1.2 |
| ## |
| { 'enum': 'MigrationCapability', |
| 'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks'] } |
| |
| ## |
| # @MigrationCapabilityStatus |
| # |
| # Migration capability information |
| # |
| # @capability: capability enum |
| # |
| # @state: capability state bool |
| # |
| # Since: 1.2 |
| ## |
| { 'type': 'MigrationCapabilityStatus', |
| 'data': { 'capability' : 'MigrationCapability', 'state' : 'bool' } } |
| |
| ## |
| # @migrate-set-capabilities |
| # |
| # Enable/Disable the following migration capabilities (like xbzrle) |
| # |
| # @capabilities: json array of capability modifications to make |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'migrate-set-capabilities', |
| 'data': { 'capabilities': ['MigrationCapabilityStatus'] } } |
| |
| ## |
| # @query-migrate-capabilities |
| # |
| # Returns information about the current migration capabilities status |
| # |
| # Returns: @MigrationCapabilitiesStatus |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'query-migrate-capabilities', 'returns': ['MigrationCapabilityStatus']} |
| |
| ## |
| # @MouseInfo: |
| # |
| # Information about a mouse device. |
| # |
| # @name: the name of the mouse device |
| # |
| # @index: the index of the mouse device |
| # |
| # @current: true if this device is currently receiving mouse events |
| # |
| # @absolute: true if this device supports absolute coordinates as input |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'MouseInfo', |
| 'data': {'name': 'str', 'index': 'int', 'current': 'bool', |
| 'absolute': 'bool'} } |
| |
| ## |
| # @query-mice: |
| # |
| # Returns information about each active mouse device |
| # |
| # Returns: a list of @MouseInfo for each device |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-mice', 'returns': ['MouseInfo'] } |
| |
| ## |
| # @CpuInfo: |
| # |
| # Information about a virtual CPU |
| # |
| # @CPU: the index of the virtual CPU |
| # |
| # @current: this only exists for backwards compatible and should be ignored |
| # |
| # @halted: true if the virtual CPU is in the halt state. Halt usually refers |
| # to a processor specific low power mode. |
| # |
| # @pc: #optional If the target is i386 or x86_64, this is the 64-bit instruction |
| # pointer. |
| # If the target is Sparc, this is the PC component of the |
| # instruction pointer. |
| # |
| # @nip: #optional If the target is PPC, the instruction pointer |
| # |
| # @npc: #optional If the target is Sparc, the NPC component of the instruction |
| # pointer |
| # |
| # @PC: #optional If the target is MIPS, the instruction pointer |
| # |
| # @thread_id: ID of the underlying host thread |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: @halted is a transient state that changes frequently. By the time the |
| # data is sent to the client, the guest may no longer be halted. |
| ## |
| { 'type': 'CpuInfo', |
| 'data': {'CPU': 'int', 'current': 'bool', 'halted': 'bool', '*pc': 'int', |
| '*nip': 'int', '*npc': 'int', '*PC': 'int', 'thread_id': 'int'} } |
| |
| ## |
| # @query-cpus: |
| # |
| # Returns a list of information about each virtual CPU. |
| # |
| # Returns: a list of @CpuInfo for each virtual CPU |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-cpus', 'returns': ['CpuInfo'] } |
| |
| ## |
| # @IOThreadInfo: |
| # |
| # Information about an iothread |
| # |
| # @id: the identifier of the iothread |
| # |
| # @thread-id: ID of the underlying host thread |
| # |
| # Since: 2.0 |
| ## |
| { 'type': 'IOThreadInfo', |
| 'data': {'id': 'str', 'thread-id': 'int'} } |
| |
| ## |
| # @query-iothreads: |
| # |
| # Returns a list of information about each iothread. |
| # |
| # Note this list excludes the QEMU main loop thread, which is not declared |
| # using the -object iothread command-line option. It is always the main thread |
| # of the process. |
| # |
| # Returns: a list of @IOThreadInfo for each iothread |
| # |
| # Since: 2.0 |
| ## |
| { 'command': 'query-iothreads', 'returns': ['IOThreadInfo'] } |
| |
| ## |
| # @NetworkAddressFamily |
| # |
| # The network address family |
| # |
| # @ipv4: IPV4 family |
| # |
| # @ipv6: IPV6 family |
| # |
| # @unix: unix socket |
| # |
| # @unknown: otherwise |
| # |
| # Since: 2.1 |
| ## |
| { 'enum': 'NetworkAddressFamily', |
| 'data': [ 'ipv4', 'ipv6', 'unix', 'unknown' ] } |
| |
| ## |
| # @VncBasicInfo |
| # |
| # The basic information for vnc network connection |
| # |
| # @host: IP address |
| # |
| # @service: The service name of the vnc port. This may depend on the host |
| # system's service database so symbolic names should not be relied |
| # on. |
| # |
| # @family: address family |
| # |
| # Since: 2.1 |
| ## |
| { 'type': 'VncBasicInfo', |
| 'data': { 'host': 'str', |
| 'service': 'str', |
| 'family': 'NetworkAddressFamily' } } |
| |
| ## |
| # @VncServerInfo |
| # |
| # The network connection information for server |
| # |
| # @auth: #optional, authentication method |
| # |
| # Since: 2.1 |
| ## |
| { 'type': 'VncServerInfo', |
| 'base': 'VncBasicInfo', |
| 'data': { '*auth': 'str' } } |
| |
| ## |
| # @VncClientInfo: |
| # |
| # Information about a connected VNC client. |
| # |
| # @x509_dname: #optional If x509 authentication is in use, the Distinguished |
| # Name of the client. |
| # |
| # @sasl_username: #optional If SASL authentication is in use, the SASL username |
| # used for authentication. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'VncClientInfo', |
| 'base': 'VncBasicInfo', |
| 'data': { '*x509_dname': 'str', '*sasl_username': 'str' } } |
| |
| ## |
| # @VncInfo: |
| # |
| # Information about the VNC session. |
| # |
| # @enabled: true if the VNC server is enabled, false otherwise |
| # |
| # @host: #optional The hostname the VNC server is bound to. This depends on |
| # the name resolution on the host and may be an IP address. |
| # |
| # @family: #optional 'ipv6' if the host is listening for IPv6 connections |
| # 'ipv4' if the host is listening for IPv4 connections |
| # 'unix' if the host is listening on a unix domain socket |
| # 'unknown' otherwise |
| # |
| # @service: #optional The service name of the server's port. This may depends |
| # on the host system's service database so symbolic names should not |
| # be relied on. |
| # |
| # @auth: #optional the current authentication type used by the server |
| # 'none' if no authentication is being used |
| # 'vnc' if VNC authentication is being used |
| # 'vencrypt+plain' if VEncrypt is used with plain text authentication |
| # 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication |
| # 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication |
| # 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth |
| # 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth |
| # 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth |
| # 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth |
| # 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth |
| # 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth |
| # |
| # @clients: a list of @VncClientInfo of all currently connected clients |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'VncInfo', |
| 'data': {'enabled': 'bool', '*host': 'str', |
| '*family': 'NetworkAddressFamily', |
| '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']} } |
| |
| ## |
| # @query-vnc: |
| # |
| # Returns information about the current VNC server |
| # |
| # Returns: @VncInfo |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-vnc', 'returns': 'VncInfo' } |
| |
| ## |
| # @SpiceBasicInfo |
| # |
| # The basic information for SPICE network connection |
| # |
| # @host: IP address |
| # |
| # @port: port number |
| # |
| # @family: address family |
| # |
| # Since: 2.1 |
| ## |
| { 'type': 'SpiceBasicInfo', |
| 'data': { 'host': 'str', |
| 'port': 'str', |
| 'family': 'NetworkAddressFamily' } } |
| |
| ## |
| # @SpiceServerInfo |
| # |
| # Information about a SPICE server |
| # |
| # @auth: #optional, authentication method |
| # |
| # Since: 2.1 |
| ## |
| { 'type': 'SpiceServerInfo', |
| 'base': 'SpiceBasicInfo', |
| 'data': { '*auth': 'str' } } |
| |
| ## |
| # @SpiceChannel |
| # |
| # Information about a SPICE client channel. |
| # |
| # @connection-id: SPICE connection id number. All channels with the same id |
| # belong to the same SPICE session. |
| # |
| # @connection-type: SPICE channel type number. "1" is the main control |
| # channel, filter for this one if you want to track spice |
| # sessions only |
| # |
| # @channel-id: SPICE channel ID number. Usually "0", might be different when |
| # multiple channels of the same type exist, such as multiple |
| # display channels in a multihead setup |
| # |
| # @tls: true if the channel is encrypted, false otherwise. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'SpiceChannel', |
| 'base': 'SpiceBasicInfo', |
| 'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int', |
| 'tls': 'bool'} } |
| |
| ## |
| # @SpiceQueryMouseMode |
| # |
| # An enumeration of Spice mouse states. |
| # |
| # @client: Mouse cursor position is determined by the client. |
| # |
| # @server: Mouse cursor position is determined by the server. |
| # |
| # @unknown: No information is available about mouse mode used by |
| # the spice server. |
| # |
| # Note: spice/enums.h has a SpiceMouseMode already, hence the name. |
| # |
| # Since: 1.1 |
| ## |
| { 'enum': 'SpiceQueryMouseMode', |
| 'data': [ 'client', 'server', 'unknown' ] } |
| |
| ## |
| # @SpiceInfo |
| # |
| # Information about the SPICE session. |
| # |
| # @enabled: true if the SPICE server is enabled, false otherwise |
| # |
| # @migrated: true if the last guest migration completed and spice |
| # migration had completed as well. false otherwise. |
| # |
| # @host: #optional The hostname the SPICE server is bound to. This depends on |
| # the name resolution on the host and may be an IP address. |
| # |
| # @port: #optional The SPICE server's port number. |
| # |
| # @compiled-version: #optional SPICE server version. |
| # |
| # @tls-port: #optional The SPICE server's TLS port number. |
| # |
| # @auth: #optional the current authentication type used by the server |
| # 'none' if no authentication is being used |
| # 'spice' uses SASL or direct TLS authentication, depending on command |
| # line options |
| # |
| # @mouse-mode: The mode in which the mouse cursor is displayed currently. Can |
| # be determined by the client or the server, or unknown if spice |
| # server doesn't provide this information. |
| # |
| # Since: 1.1 |
| # |
| # @channels: a list of @SpiceChannel for each active spice channel |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'SpiceInfo', |
| 'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int', |
| '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str', |
| 'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']} } |
| |
| ## |
| # @query-spice |
| # |
| # Returns information about the current SPICE server |
| # |
| # Returns: @SpiceInfo |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-spice', 'returns': 'SpiceInfo' } |
| |
| ## |
| # @BalloonInfo: |
| # |
| # Information about the guest balloon device. |
| # |
| # @actual: the number of bytes the balloon currently contains |
| # |
| # Since: 0.14.0 |
| # |
| ## |
| { 'type': 'BalloonInfo', 'data': {'actual': 'int' } } |
| |
| ## |
| # @query-balloon: |
| # |
| # Return information about the balloon device. |
| # |
| # Returns: @BalloonInfo on success |
| # If the balloon driver is enabled but not functional because the KVM |
| # kernel module cannot support it, KvmMissingCap |
| # If no balloon device is present, DeviceNotActive |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-balloon', 'returns': 'BalloonInfo' } |
| |
| ## |
| # @PciMemoryRange: |
| # |
| # A PCI device memory region |
| # |
| # @base: the starting address (guest physical) |
| # |
| # @limit: the ending address (guest physical) |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'PciMemoryRange', 'data': {'base': 'int', 'limit': 'int'} } |
| |
| ## |
| # @PciMemoryRegion |
| # |
| # Information about a PCI device I/O region. |
| # |
| # @bar: the index of the Base Address Register for this region |
| # |
| # @type: 'io' if the region is a PIO region |
| # 'memory' if the region is a MMIO region |
| # |
| # @prefetch: #optional if @type is 'memory', true if the memory is prefetchable |
| # |
| # @mem_type_64: #optional if @type is 'memory', true if the BAR is 64-bit |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'PciMemoryRegion', |
| 'data': {'bar': 'int', 'type': 'str', 'address': 'int', 'size': 'int', |
| '*prefetch': 'bool', '*mem_type_64': 'bool' } } |
| |
| ## |
| # @PciBridgeInfo: |
| # |
| # Information about a PCI Bridge device |
| # |
| # @bus.number: primary bus interface number. This should be the number of the |
| # bus the device resides on. |
| # |
| # @bus.secondary: secondary bus interface number. This is the number of the |
| # main bus for the bridge |
| # |
| # @bus.subordinate: This is the highest number bus that resides below the |
| # bridge. |
| # |
| # @bus.io_range: The PIO range for all devices on this bridge |
| # |
| # @bus.memory_range: The MMIO range for all devices on this bridge |
| # |
| # @bus.prefetchable_range: The range of prefetchable MMIO for all devices on |
| # this bridge |
| # |
| # @devices: a list of @PciDeviceInfo for each device on this bridge |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'PciBridgeInfo', |
| 'data': {'bus': { 'number': 'int', 'secondary': 'int', 'subordinate': 'int', |
| 'io_range': 'PciMemoryRange', |
| 'memory_range': 'PciMemoryRange', |
| 'prefetchable_range': 'PciMemoryRange' }, |
| '*devices': ['PciDeviceInfo']} } |
| |
| ## |
| # @PciDeviceInfo: |
| # |
| # Information about a PCI device |
| # |
| # @bus: the bus number of the device |
| # |
| # @slot: the slot the device is located in |
| # |
| # @function: the function of the slot used by the device |
| # |
| # @class_info.desc: #optional a string description of the device's class |
| # |
| # @class_info.class: the class code of the device |
| # |
| # @id.device: the PCI device id |
| # |
| # @id.vendor: the PCI vendor id |
| # |
| # @irq: #optional if an IRQ is assigned to the device, the IRQ number |
| # |
| # @qdev_id: the device name of the PCI device |
| # |
| # @pci_bridge: if the device is a PCI bridge, the bridge information |
| # |
| # @regions: a list of the PCI I/O regions associated with the device |
| # |
| # Notes: the contents of @class_info.desc are not stable and should only be |
| # treated as informational. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'PciDeviceInfo', |
| 'data': {'bus': 'int', 'slot': 'int', 'function': 'int', |
| 'class_info': {'*desc': 'str', 'class': 'int'}, |
| 'id': {'device': 'int', 'vendor': 'int'}, |
| '*irq': 'int', 'qdev_id': 'str', '*pci_bridge': 'PciBridgeInfo', |
| 'regions': ['PciMemoryRegion']} } |
| |
| ## |
| # @PciInfo: |
| # |
| # Information about a PCI bus |
| # |
| # @bus: the bus index |
| # |
| # @devices: a list of devices on this bus |
| # |
| # Since: 0.14.0 |
| ## |
| { 'type': 'PciInfo', 'data': {'bus': 'int', 'devices': ['PciDeviceInfo']} } |
| |
| ## |
| # @query-pci: |
| # |
| # Return information about the PCI bus topology of the guest. |
| # |
| # Returns: a list of @PciInfo for each PCI bus |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'query-pci', 'returns': ['PciInfo'] } |
| |
| ## |
| # @quit: |
| # |
| # This command will cause the QEMU process to exit gracefully. While every |
| # attempt is made to send the QMP response before terminating, this is not |
| # guaranteed. When using this interface, a premature EOF would not be |
| # unexpected. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'quit' } |
| |
| ## |
| # @stop: |
| # |
| # Stop all guest VCPU execution. |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: This function will succeed even if the guest is already in the stopped |
| # state. In "inmigrate" state, it will ensure that the guest |
| # remains paused once migration finishes, as if the -S option was |
| # passed on the command line. |
| ## |
| { 'command': 'stop' } |
| |
| ## |
| # @system_reset: |
| # |
| # Performs a hard reset of a guest. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'system_reset' } |
| |
| ## |
| # @system_powerdown: |
| # |
| # Requests that a guest perform a powerdown operation. |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: A guest may or may not respond to this command. This command |
| # returning does not indicate that a guest has accepted the request or |
| # that it has shut down. Many guests will respond to this command by |
| # prompting the user in some way. |
| ## |
| { 'command': 'system_powerdown' } |
| |
| ## |
| # @cpu: |
| # |
| # This command is a nop that is only provided for the purposes of compatibility. |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: Do not use this command. |
| ## |
| { 'command': 'cpu', 'data': {'index': 'int'} } |
| |
| ## |
| # @cpu-add |
| # |
| # Adds CPU with specified ID |
| # |
| # @id: ID of CPU to be created, valid values [0..max_cpus) |
| # |
| # Returns: Nothing on success |
| # |
| # Since 1.5 |
| ## |
| { 'command': 'cpu-add', 'data': {'id': 'int'} } |
| |
| ## |
| # @memsave: |
| # |
| # Save a portion of guest memory to a file. |
| # |
| # @val: the virtual address of the guest to start from |
| # |
| # @size: the size of memory region to save |
| # |
| # @filename: the file to save the memory to as binary data |
| # |
| # @cpu-index: #optional the index of the virtual CPU to use for translating the |
| # virtual address (defaults to CPU 0) |
| # |
| # Returns: Nothing on success |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: Errors were not reliably returned until 1.1 |
| ## |
| { 'command': 'memsave', |
| 'data': {'val': 'int', 'size': 'int', 'filename': 'str', '*cpu-index': 'int'} } |
| |
| ## |
| # @pmemsave: |
| # |
| # Save a portion of guest physical memory to a file. |
| # |
| # @val: the physical address of the guest to start from |
| # |
| # @size: the size of memory region to save |
| # |
| # @filename: the file to save the memory to as binary data |
| # |
| # Returns: Nothing on success |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: Errors were not reliably returned until 1.1 |
| ## |
| { 'command': 'pmemsave', |
| 'data': {'val': 'int', 'size': 'int', 'filename': 'str'} } |
| |
| ## |
| # @cont: |
| # |
| # Resume guest VCPU execution. |
| # |
| # Since: 0.14.0 |
| # |
| # Returns: If successful, nothing |
| # If QEMU was started with an encrypted block device and a key has |
| # not yet been set, DeviceEncrypted. |
| # |
| # Notes: This command will succeed if the guest is currently running. It |
| # will also succeed if the guest is in the "inmigrate" state; in |
| # this case, the effect of the command is to make sure the guest |
| # starts once migration finishes, removing the effect of the -S |
| # command line option if it was passed. |
| ## |
| { 'command': 'cont' } |
| |
| ## |
| # @system_wakeup: |
| # |
| # Wakeup guest from suspend. Does nothing in case the guest isn't suspended. |
| # |
| # Since: 1.1 |
| # |
| # Returns: nothing. |
| ## |
| { 'command': 'system_wakeup' } |
| |
| ## |
| # @inject-nmi: |
| # |
| # Injects a Non-Maskable Interrupt into the default CPU (x86/s390) or all CPUs (ppc64). |
| # |
| # Returns: If successful, nothing |
| # |
| # Since: 0.14.0 |
| # |
| # Note: prior to 2.1, this command was only supported for x86 and s390 VMs |
| ## |
| { 'command': 'inject-nmi' } |
| |
| ## |
| # @set_link: |
| # |
| # Sets the link status of a virtual network adapter. |
| # |
| # @name: the device name of the virtual network adapter |
| # |
| # @up: true to set the link status to be up |
| # |
| # Returns: Nothing on success |
| # If @name is not a valid network device, DeviceNotFound |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: Not all network adapters support setting link status. This command |
| # will succeed even if the network adapter does not support link status |
| # notification. |
| ## |
| { 'command': 'set_link', 'data': {'name': 'str', 'up': 'bool'} } |
| |
| ## |
| # @balloon: |
| # |
| # Request the balloon driver to change its balloon size. |
| # |
| # @value: the target size of the balloon in bytes |
| # |
| # Returns: Nothing on success |
| # If the balloon driver is enabled but not functional because the KVM |
| # kernel module cannot support it, KvmMissingCap |
| # If no balloon device is present, DeviceNotActive |
| # |
| # Notes: This command just issues a request to the guest. When it returns, |
| # the balloon size may not have changed. A guest can change the balloon |
| # size independent of this command. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'balloon', 'data': {'value': 'int'} } |
| |
| ## |
| # @Abort |
| # |
| # This action can be used to test transaction failure. |
| # |
| # Since: 1.6 |
| ### |
| { 'type': 'Abort', |
| 'data': { } } |
| |
| ## |
| # @TransactionAction |
| # |
| # A discriminated record of operations that can be performed with |
| # @transaction. |
| ## |
| { 'union': 'TransactionAction', |
| 'data': { |
| 'blockdev-snapshot-sync': 'BlockdevSnapshot', |
| 'drive-backup': 'DriveBackup', |
| 'abort': 'Abort', |
| 'blockdev-snapshot-internal-sync': 'BlockdevSnapshotInternal' |
| } } |
| |
| ## |
| # @transaction |
| # |
| # Executes a number of transactionable QMP commands atomically. If any |
| # operation fails, then the entire set of actions will be abandoned and the |
| # appropriate error returned. |
| # |
| # List of: |
| # @TransactionAction: information needed for the respective operation |
| # |
| # Returns: nothing on success |
| # Errors depend on the operations of the transaction |
| # |
| # Note: The transaction aborts on the first failure. Therefore, there will be |
| # information on only one failed operation returned in an error condition, and |
| # subsequent actions will not have been attempted. |
| # |
| # Since 1.1 |
| ## |
| { 'command': 'transaction', |
| 'data': { 'actions': [ 'TransactionAction' ] } } |
| |
| ## |
| # @human-monitor-command: |
| # |
| # Execute a command on the human monitor and return the output. |
| # |
| # @command-line: the command to execute in the human monitor |
| # |
| # @cpu-index: #optional The CPU to use for commands that require an implicit CPU |
| # |
| # Returns: the output of the command as a string |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: This command only exists as a stop-gap. Its use is highly |
| # discouraged. The semantics of this command are not guaranteed. |
| # |
| # Known limitations: |
| # |
| # o This command is stateless, this means that commands that depend |
| # on state information (such as getfd) might not work |
| # |
| # o Commands that prompt the user for data (eg. 'cont' when the block |
| # device is encrypted) don't currently work |
| ## |
| { 'command': 'human-monitor-command', |
| 'data': {'command-line': 'str', '*cpu-index': 'int'}, |
| 'returns': 'str' } |
| |
| ## |
| # @migrate_cancel |
| # |
| # Cancel the current executing migration process. |
| # |
| # Returns: nothing on success |
| # |
| # Notes: This command succeeds even if there is no migration process running. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'migrate_cancel' } |
| |
| ## |
| # @migrate_set_downtime |
| # |
| # Set maximum tolerated downtime for migration. |
| # |
| # @value: maximum downtime in seconds |
| # |
| # Returns: nothing on success |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'migrate_set_downtime', 'data': {'value': 'number'} } |
| |
| ## |
| # @migrate_set_speed |
| # |
| # Set maximum speed for migration. |
| # |
| # @value: maximum speed in bytes. |
| # |
| # Returns: nothing on success |
| # |
| # Notes: A value lesser than zero will be automatically round up to zero. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'migrate_set_speed', 'data': {'value': 'int'} } |
| |
| ## |
| # @migrate-set-cache-size |
| # |
| # Set XBZRLE cache size |
| # |
| # @value: cache size in bytes |
| # |
| # The size will be rounded down to the nearest power of 2. |
| # The cache size can be modified before and during ongoing migration |
| # |
| # Returns: nothing on success |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'migrate-set-cache-size', 'data': {'value': 'int'} } |
| |
| ## |
| # @query-migrate-cache-size |
| # |
| # query XBZRLE cache size |
| # |
| # Returns: XBZRLE cache size in bytes |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'query-migrate-cache-size', 'returns': 'int' } |
| |
| ## |
| # @ObjectPropertyInfo: |
| # |
| # @name: the name of the property |
| # |
| # @type: the type of the property. This will typically come in one of four |
| # forms: |
| # |
| # 1) A primitive type such as 'u8', 'u16', 'bool', 'str', or 'double'. |
| # These types are mapped to the appropriate JSON type. |
| # |
| # 2) A legacy type in the form 'legacy<subtype>' where subtype is the |
| # legacy qdev typename. These types are always treated as strings. |
| # |
| # 3) A child type in the form 'child<subtype>' where subtype is a qdev |
| # device type name. Child properties create the composition tree. |
| # |
| # 4) A link type in the form 'link<subtype>' where subtype is a qdev |
| # device type name. Link properties form the device model graph. |
| # |
| # Since: 1.2 |
| ## |
| { 'type': 'ObjectPropertyInfo', |
| 'data': { 'name': 'str', 'type': 'str' } } |
| |
| ## |
| # @qom-list: |
| # |
| # This command will list any properties of a object given a path in the object |
| # model. |
| # |
| # @path: the path within the object model. See @qom-get for a description of |
| # this parameter. |
| # |
| # Returns: a list of @ObjectPropertyInfo that describe the properties of the |
| # object. |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'qom-list', |
| 'data': { 'path': 'str' }, |
| 'returns': [ 'ObjectPropertyInfo' ] } |
| |
| ## |
| # @qom-get: |
| # |
| # This command will get a property from a object model path and return the |
| # value. |
| # |
| # @path: The path within the object model. There are two forms of supported |
| # paths--absolute and partial paths. |
| # |
| # Absolute paths are derived from the root object and can follow child<> |
| # or link<> properties. Since they can follow link<> properties, they |
| # can be arbitrarily long. Absolute paths look like absolute filenames |
| # and are prefixed with a leading slash. |
| # |
| # Partial paths look like relative filenames. They do not begin |
| # with a prefix. The matching rules for partial paths are subtle but |
| # designed to make specifying objects easy. At each level of the |
| # composition tree, the partial path is matched as an absolute path. |
| # The first match is not returned. At least two matches are searched |
| # for. A successful result is only returned if only one match is |
| # found. If more than one match is found, a flag is return to |
| # indicate that the match was ambiguous. |
| # |
| # @property: The property name to read |
| # |
| # Returns: The property value. The type depends on the property type. legacy<> |
| # properties are returned as #str. child<> and link<> properties are |
| # returns as #str pathnames. All integer property types (u8, u16, etc) |
| # are returned as #int. |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'qom-get', |
| 'data': { 'path': 'str', 'property': 'str' }, |
| 'returns': 'visitor', |
| 'gen': 'no' } |
| |
| ## |
| # @qom-set: |
| # |
| # This command will set a property from a object model path. |
| # |
| # @path: see @qom-get for a description of this parameter |
| # |
| # @property: the property name to set |
| # |
| # @value: a value who's type is appropriate for the property type. See @qom-get |
| # for a description of type mapping. |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'qom-set', |
| 'data': { 'path': 'str', 'property': 'str', 'value': 'visitor' }, |
| 'gen': 'no' } |
| |
| ## |
| # @set_password: |
| # |
| # Sets the password of a remote display session. |
| # |
| # @protocol: `vnc' to modify the VNC server password |
| # `spice' to modify the Spice server password |
| # |
| # @password: the new password |
| # |
| # @connected: #optional how to handle existing clients when changing the |
| # password. If nothing is specified, defaults to `keep' |
| # `fail' to fail the command if clients are connected |
| # `disconnect' to disconnect existing clients |
| # `keep' to maintain existing clients |
| # |
| # Returns: Nothing on success |
| # If Spice is not enabled, DeviceNotFound |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'set_password', |
| 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} } |
| |
| ## |
| # @expire_password: |
| # |
| # Expire the password of a remote display server. |
| # |
| # @protocol: the name of the remote display protocol `vnc' or `spice' |
| # |
| # @time: when to expire the password. |
| # `now' to expire the password immediately |
| # `never' to cancel password expiration |
| # `+INT' where INT is the number of seconds from now (integer) |
| # `INT' where INT is the absolute time in seconds |
| # |
| # Returns: Nothing on success |
| # If @protocol is `spice' and Spice is not active, DeviceNotFound |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: Time is relative to the server and currently there is no way to |
| # coordinate server time with client time. It is not recommended to |
| # use the absolute time version of the @time parameter unless you're |
| # sure you are on the same machine as the QEMU instance. |
| ## |
| { 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} } |
| |
| ## |
| # @change-vnc-password: |
| # |
| # Change the VNC server password. |
| # |
| # @target: the new password to use with VNC authentication |
| # |
| # Since: 1.1 |
| # |
| # Notes: An empty password in this command will set the password to the empty |
| # string. Existing clients are unaffected by executing this command. |
| ## |
| { 'command': 'change-vnc-password', 'data': {'password': 'str'} } |
| |
| ## |
| # @change: |
| # |
| # This command is multiple commands multiplexed together. |
| # |
| # @device: This is normally the name of a block device but it may also be 'vnc'. |
| # when it's 'vnc', then sub command depends on @target |
| # |
| # @target: If @device is a block device, then this is the new filename. |
| # If @device is 'vnc', then if the value 'password' selects the vnc |
| # change password command. Otherwise, this specifies a new server URI |
| # address to listen to for VNC connections. |
| # |
| # @arg: If @device is a block device, then this is an optional format to open |
| # the device with. |
| # If @device is 'vnc' and @target is 'password', this is the new VNC |
| # password to set. If this argument is an empty string, then no future |
| # logins will be allowed. |
| # |
| # Returns: Nothing on success. |
| # If @device is not a valid block device, DeviceNotFound |
| # If the new block device is encrypted, DeviceEncrypted. Note that |
| # if this error is returned, the device has been opened successfully |
| # and an additional call to @block_passwd is required to set the |
| # device's password. The behavior of reads and writes to the block |
| # device between when these calls are executed is undefined. |
| # |
| # Notes: It is strongly recommended that this interface is not used especially |
| # for changing block devices. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'change', |
| 'data': {'device': 'str', 'target': 'str', '*arg': 'str'} } |
| |
| ## |
| # @ObjectTypeInfo: |
| # |
| # This structure describes a search result from @qom-list-types |
| # |
| # @name: the type name found in the search |
| # |
| # Since: 1.1 |
| # |
| # Notes: This command is experimental and may change syntax in future releases. |
| ## |
| { 'type': 'ObjectTypeInfo', |
| 'data': { 'name': 'str' } } |
| |
| ## |
| # @qom-list-types: |
| # |
| # This command will return a list of types given search parameters |
| # |
| # @implements: if specified, only return types that implement this type name |
| # |
| # @abstract: if true, include abstract types in the results |
| # |
| # Returns: a list of @ObjectTypeInfo or an empty list if no results are found |
| # |
| # Since: 1.1 |
| ## |
| { 'command': 'qom-list-types', |
| 'data': { '*implements': 'str', '*abstract': 'bool' }, |
| 'returns': [ 'ObjectTypeInfo' ] } |
| |
| ## |
| # @DevicePropertyInfo: |
| # |
| # Information about device properties. |
| # |
| # @name: the name of the property |
| # @type: the typename of the property |
| # @description: #optional if specified, the description of the property. |
| # (since 2.2) |
| # |
| # Since: 1.2 |
| ## |
| { 'type': 'DevicePropertyInfo', |
| 'data': { 'name': 'str', 'type': 'str', '*description': 'str' } } |
| |
| ## |
| # @device-list-properties: |
| # |
| # List properties associated with a device. |
| # |
| # @typename: the type name of a device |
| # |
| # Returns: a list of DevicePropertyInfo describing a devices properties |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'device-list-properties', |
| 'data': { 'typename': 'str'}, |
| 'returns': [ 'DevicePropertyInfo' ] } |
| |
| ## |
| # @migrate |
| # |
| # Migrates the current running guest to another Virtual Machine. |
| # |
| # @uri: the Uniform Resource Identifier of the destination VM |
| # |
| # @blk: #optional do block migration (full disk copy) |
| # |
| # @inc: #optional incremental disk copy migration |
| # |
| # @detach: this argument exists only for compatibility reasons and |
| # is ignored by QEMU |
| # |
| # Returns: nothing on success |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'migrate', |
| 'data': {'uri': 'str', '*blk': 'bool', '*inc': 'bool', '*detach': 'bool' } } |
| |
| # @xen-save-devices-state: |
| # |
| # Save the state of all devices to file. The RAM and the block devices |
| # of the VM are not saved by this command. |
| # |
| # @filename: the file to save the state of the devices to as binary |
| # data. See xen-save-devices-state.txt for a description of the binary |
| # format. |
| # |
| # Returns: Nothing on success |
| # |
| # Since: 1.1 |
| ## |
| { 'command': 'xen-save-devices-state', 'data': {'filename': 'str'} } |
| |
| ## |
| # @xen-set-global-dirty-log |
| # |
| # Enable or disable the global dirty log mode. |
| # |
| # @enable: true to enable, false to disable. |
| # |
| # Returns: nothing |
| # |
| # Since: 1.3 |
| ## |
| { 'command': 'xen-set-global-dirty-log', 'data': { 'enable': 'bool' } } |
| |
| ## |
| # @device_del: |
| # |
| # Remove a device from a guest |
| # |
| # @id: the name of the device |
| # |
| # Returns: Nothing on success |
| # If @id is not a valid device, DeviceNotFound |
| # |
| # Notes: When this command completes, the device may not be removed from the |
| # guest. Hot removal is an operation that requires guest cooperation. |
| # This command merely requests that the guest begin the hot removal |
| # process. Completion of the device removal process is signaled with a |
| # DEVICE_DELETED event. Guest reset will automatically complete removal |
| # for all devices. |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'device_del', 'data': {'id': 'str'} } |
| |
| ## |
| # @DumpGuestMemoryFormat: |
| # |
| # An enumeration of guest-memory-dump's format. |
| # |
| # @elf: elf format |
| # |
| # @kdump-zlib: kdump-compressed format with zlib-compressed |
| # |
| # @kdump-lzo: kdump-compressed format with lzo-compressed |
| # |
| # @kdump-snappy: kdump-compressed format with snappy-compressed |
| # |
| # Since: 2.0 |
| ## |
| { 'enum': 'DumpGuestMemoryFormat', |
| 'data': [ 'elf', 'kdump-zlib', 'kdump-lzo', 'kdump-snappy' ] } |
| |
| ## |
| # @dump-guest-memory |
| # |
| # Dump guest's memory to vmcore. It is a synchronous operation that can take |
| # very long depending on the amount of guest memory. This command is only |
| # supported on i386 and x86_64. |
| # |
| # @paging: if true, do paging to get guest's memory mapping. This allows |
| # using gdb to process the core file. |
| # |
| # IMPORTANT: this option can make QEMU allocate several gigabytes |
| # of RAM. This can happen for a large guest, or a |
| # malicious guest pretending to be large. |
| # |
| # Also, paging=true has the following limitations: |
| # |
| # 1. The guest may be in a catastrophic state or can have corrupted |
| # memory, which cannot be trusted |
| # 2. The guest can be in real-mode even if paging is enabled. For |
| # example, the guest uses ACPI to sleep, and ACPI sleep state |
| # goes in real-mode |
| # |
| # @protocol: the filename or file descriptor of the vmcore. The supported |
| # protocols are: |
| # |
| # 1. file: the protocol starts with "file:", and the following |
| # string is the file's path. |
| # 2. fd: the protocol starts with "fd:", and the following string |
| # is the fd's name. |
| # |
| # @begin: #optional if specified, the starting physical address. |
| # |
| # @length: #optional if specified, the memory size, in bytes. If you don't |
| # want to dump all guest's memory, please specify the start @begin |
| # and @length |
| # |
| # @format: #optional if specified, the format of guest memory dump. But non-elf |
| # format is conflict with paging and filter, ie. @paging, @begin and |
| # @length is not allowed to be specified with non-elf @format at the |
| # same time (since 2.0) |
| # |
| # Returns: nothing on success |
| # |
| # Since: 1.2 |
| ## |
| { 'command': 'dump-guest-memory', |
| 'data': { 'paging': 'bool', 'protocol': 'str', '*begin': 'int', |
| '*length': 'int', '*format': 'DumpGuestMemoryFormat' } } |
| |
| ## |
| # @DumpGuestMemoryCapability: |
| # |
| # A list of the available formats for dump-guest-memory |
| # |
| # Since: 2.0 |
| ## |
| { 'type': 'DumpGuestMemoryCapability', |
| 'data': { |
| 'formats': ['DumpGuestMemoryFormat'] } } |
| |
| ## |
| # @query-dump-guest-memory-capability: |
| # |
| # Returns the available formats for dump-guest-memory |
| # |
| # Returns: A @DumpGuestMemoryCapability object listing available formats for |
| # dump-guest-memory |
| # |
| # Since: 2.0 |
| ## |
| { 'command': 'query-dump-guest-memory-capability', |
| 'returns': 'DumpGuestMemoryCapability' } |
| |
| ## |
| # @netdev_add: |
| # |
| # Add a network backend. |
| # |
| # @type: the type of network backend. Current valid values are 'user', 'tap', |
| # 'vde', 'socket', 'dump' and 'bridge' |
| # |
| # @id: the name of the new network backend |
| # |
| # @props: #optional a list of properties to be passed to the backend in |
| # the format 'name=value', like 'ifname=tap0,script=no' |
| # |
| # Notes: The semantics of @props is not well defined. Future commands will be |
| # introduced that provide stronger typing for backend creation. |
| # |
| # Since: 0.14.0 |
| # |
| # Returns: Nothing on success |
| # If @type is not a valid network backend, DeviceNotFound |
| ## |
| { 'command': 'netdev_add', |
| 'data': {'type': 'str', 'id': 'str', '*props': '**'}, |
| 'gen': 'no' } |
| |
| ## |
| # @netdev_del: |
| # |
| # Remove a network backend. |
| # |
| # @id: the name of the network backend to remove |
| # |
| # Returns: Nothing on success |
| # If @id is not a valid network backend, DeviceNotFound |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'netdev_del', 'data': {'id': 'str'} } |
| |
| ## |
| # @object-add: |
| # |
| # Create a QOM object. |
| # |
| # @qom-type: the class name for the object to be created |
| # |
| # @id: the name of the new object |
| # |
| # @props: #optional a dictionary of properties to be passed to the backend |
| # |
| # Returns: Nothing on success |
| # Error if @qom-type is not a valid class name |
| # |
| # Since: 2.0 |
| ## |
| { 'command': 'object-add', |
| 'data': {'qom-type': 'str', 'id': 'str', '*props': 'dict'}, |
| 'gen': 'no' } |
| |
| ## |
| # @object-del: |
| # |
| # Remove a QOM object. |
| # |
| # @id: the name of the QOM object to remove |
| # |
| # Returns: Nothing on success |
| # Error if @id is not a valid id for a QOM object |
| # |
| # Since: 2.0 |
| ## |
| { 'command': 'object-del', 'data': {'id': 'str'} } |
| |
| ## |
| # @NetdevNoneOptions |
| # |
| # Use it alone to have zero network devices. |
| # |
| # Since 1.2 |
| ## |
| { 'type': 'NetdevNoneOptions', |
| 'data': { } } |
| |
| ## |
| # @NetLegacyNicOptions |
| # |
| # Create a new Network Interface Card. |
| # |
| # @netdev: #optional id of -netdev to connect to |
| # |
| # @macaddr: #optional MAC address |
| # |
| # @model: #optional device model (e1000, rtl8139, virtio etc.) |
| # |
| # @addr: #optional PCI device address |
| # |
| # @vectors: #optional number of MSI-x vectors, 0 to disable MSI-X |
| # |
| # Since 1.2 |
| ## |
| { 'type': 'NetLegacyNicOptions', |
| 'data': { |
| '*netdev': 'str', |
| '*macaddr': 'str', |
| '*model': 'str', |
| '*addr': 'str', |
| '*vectors': 'uint32' } } |
| |
| ## |
| # @String |
| # |
| # A fat type wrapping 'str', to be embedded in lists. |
| # |
| # Since 1.2 |
| ## |
| { 'type': 'String', |
| 'data': { |
| 'str': 'str' } } |
| |
| ## |
| # @NetdevUserOptions |
| # |
| # Use the user mode network stack which requires no administrator privilege to |
| # run. |
| # |
| # @hostname: #optional client hostname reported by the builtin DHCP server |
| # |
| # @restrict: #optional isolate the guest from the host |
| # |
| # @ip: #optional legacy parameter, use net= instead |
| # |
| # @net: #optional IP address and optional netmask |
| # |
| # @host: #optional guest-visible address of the host |
| # |
| # @tftp: #optional root directory of the built-in TFTP server |
| # |
| # @bootfile: #optional BOOTP filename, for use with tftp= |
| # |
| # @dhcpstart: #optional the first of the 16 IPs the built-in DHCP server can |
| # assign |
| # |
| # @dns: #optional guest-visible address of the virtual nameserver |
| # |
| # @dnssearch: #optional list of DNS suffixes to search, passed as DHCP option |
| # to the guest |
| # |
| # @smb: #optional root directory of the built-in SMB server |
| # |
| # @smbserver: #optional IP address of the built-in SMB server |
| # |
| # @hostfwd: #optional redirect incoming TCP or UDP host connections to guest |
| # endpoints |
| # |
| # @guestfwd: #optional forward guest TCP connections |
| # |
| # Since 1.2 |
| ## |
| { 'type': 'NetdevUserOptions', |
| 'data': { |
| '*hostname': 'str', |
| '*restrict': 'bool', |
| '*ip': 'str', |
| '*net': 'str', |
| '*host': 'str', |
| '*tftp': 'str', |
| '*bootfile': 'str', |
| '*dhcpstart': 'str', |
| '*dns': 'str', |
| '*dnssearch': ['String'], |
| '*smb': 'str', |
| '*smbserver': 'str', |
| '*hostfwd': ['String'], |
| '*guestfwd': ['String'] } } |
| |
| ## |
| # @NetdevTapOptions |
| # |
| # Connect the host TAP network interface name to the VLAN. |
| # |
| # @ifname: #optional interface name |
| # |
| # @fd: #optional file descriptor of an already opened tap |
| # |
| # @fds: #optional multiple file descriptors of already opened multiqueue capable |
| # tap |
| # |
| # @script: #optional script to initialize the interface |
| # |
| # @downscript: #optional script to shut down the interface |
| # |
| # @helper: #optional command to execute to configure bridge |
| # |
| # @sndbuf: #optional send buffer limit. Understands [TGMKkb] suffixes. |
| # |
| # @vnet_hdr: #optional enable the IFF_VNET_HDR flag on the tap interface |
| # |
| # @vhost: #optional enable vhost-net network accelerator |
| # |
| # @vhostfd: #optional file descriptor of an already opened vhost net device |
| # |
| # @vhostfds: #optional file descriptors of multiple already opened vhost net |
| # devices |
| # |
| # @vhostforce: #optional vhost on for non-MSIX virtio guests |
| # |
| # @queues: #optional number of queues to be created for multiqueue capable tap |
| # |
| # Since 1.2 |
| ## |
| { 'type': 'NetdevTapOptions', |
| 'data': { |
| '*ifname': 'str', |
| '*fd': 'str', |
| '*fds': 'str', |
| '*script': 'str', |
| '*downscript': 'str', |
| '*helper': 'str', |
| '*sndbuf': 'size', |
| '*vnet_hdr': 'bool', |
| '*vhost': 'bool', |
| '*vhostfd': 'str', |
| '*vhostfds': 'str', |
| '*vhostforce': 'bool', |
| '*queues': 'uint32'} } |
| |
| ## |
| # @NetdevSocketOptions |
| # |
| # Connect the VLAN to a remote VLAN in another QEMU virtual machine using a TCP |
| # socket connection. |
| # |
| # @fd: #optional file descriptor of an already opened socket |
| # |
| # @listen: #optional port number, and optional hostname, to listen on |
| # |
| # @connect: #optional port number, and optional hostname, to connect to |
| # |
| # @mcast: #optional UDP multicast address and port number |
| # |
| # @localaddr: #optional source address and port for multicast and udp packets |
| # |
| # @udp: #optional UDP unicast address and port number |
| # |
| # Since 1.2 |
| ## |
| { 'type': 'NetdevSocketOptions', |
| 'data': { |
| '*fd': 'str', |
| '*listen': 'str', |
| '*connect': 'str', |
| '*mcast': 'str', |
| '*localaddr': 'str', |
| '*udp': 'str' } } |
| |
| ## |
| # @NetdevL2TPv3Options |
| # |
| # Connect the VLAN to Ethernet over L2TPv3 Static tunnel |
| # |
| # @src: source address |
| # |
| # @dst: destination address |
| # |
| # @srcport: #optional source port - mandatory for udp, optional for ip |
| # |
| # @dstport: #optional destination port - mandatory for udp, optional for ip |
| # |
| # @ipv6: #optional - force the use of ipv6 |
| # |
| # @udp: #optional - use the udp version of l2tpv3 encapsulation |
| # |
| # @cookie64: #optional - use 64 bit coookies |
| # |
| # @counter: #optional have sequence counter |
| # |
| # @pincounter: #optional pin sequence counter to zero - |
| # workaround for buggy implementations or |
| # networks with packet reorder |
| # |
| # @txcookie: #optional 32 or 64 bit transmit cookie |
| # |
| # @rxcookie: #optional 32 or 64 bit receive cookie |
| # |
| # @txsession: 32 bit transmit session |
| # |
| # @rxsession: #optional 32 bit receive session - if not specified |
| # set to the same value as transmit |
| # |
| # @offset: #optional additional offset - allows the insertion of |
| # additional application-specific data before the packet payload |
| # |
| # Since 2.1 |
| ## |
| { 'type': 'NetdevL2TPv3Options', |
| 'data': { |
| 'src': 'str', |
| 'dst': 'str', |
| '*srcport': 'str', |
| '*dstport': 'str', |
| '*ipv6': 'bool', |
| '*udp': 'bool', |
| '*cookie64': 'bool', |
| '*counter': 'bool', |
| '*pincounter': 'bool', |
| '*txcookie': 'uint64', |
| '*rxcookie': 'uint64', |
| 'txsession': 'uint32', |
| '*rxsession': 'uint32', |
| '*offset': 'uint32' } } |
| |
| ## |
| # @NetdevVdeOptions |
| # |
| # Connect the VLAN to a vde switch running on the host. |
| # |
| # @sock: #optional socket path |
| # |
| # @port: #optional port number |
| # |
| # @group: #optional group owner of socket |
| # |
| # @mode: #optional permissions for socket |
| # |
| # Since 1.2 |
| ## |
| { 'type': 'NetdevVdeOptions', |
| 'data': { |
| '*sock': 'str', |
| '*port': 'uint16', |
| '*group': 'str', |
| '*mode': 'uint16' } } |
| |
| ## |
| # @NetdevDumpOptions |
| # |
| # Dump VLAN network traffic to a file. |
| # |
| # @len: #optional per-packet size limit (64k default). Understands [TGMKkb] |
| # suffixes. |
| # |
| # @file: #optional dump file path (default is qemu-vlan0.pcap) |
| # |
| # Since 1.2 |
| ## |
| { 'type': 'NetdevDumpOptions', |
| 'data': { |
| '*len': 'size', |
| '*file': 'str' } } |
| |
| ## |
| # @NetdevBridgeOptions |
| # |
| # Connect a host TAP network interface to a host bridge device. |
| # |
| # @br: #optional bridge name |
| # |
| # @helper: #optional command to execute to configure bridge |
| # |
| # Since 1.2 |
| ## |
| { 'type': 'NetdevBridgeOptions', |
| 'data': { |
| '*br': 'str', |
| '*helper': 'str' } } |
| |
| ## |
| # @NetdevHubPortOptions |
| # |
| # Connect two or more net clients through a software hub. |
| # |
| # @hubid: hub identifier number |
| # |
| # Since 1.2 |
| ## |
| { 'type': 'NetdevHubPortOptions', |
| 'data': { |
| 'hubid': 'int32' } } |
| |
| ## |
| # @NetdevNetmapOptions |
| # |
| # Connect a client to a netmap-enabled NIC or to a VALE switch port |
| # |
| # @ifname: Either the name of an existing network interface supported by |
| # netmap, or the name of a VALE port (created on the fly). |
| # A VALE port name is in the form 'valeXXX:YYY', where XXX and |
| # YYY are non-negative integers. XXX identifies a switch and |
| # YYY identifies a port of the switch. VALE ports having the |
| # same XXX are therefore connected to the same switch. |
| # |
| # @devname: #optional path of the netmap device (default: '/dev/netmap'). |
| # |
| # Since 2.0 |
| ## |
| { 'type': 'NetdevNetmapOptions', |
| 'data': { |
| 'ifname': 'str', |
| '*devname': 'str' } } |
| |
| ## |
| # @NetdevVhostUserOptions |
| # |
| # Vhost-user network backend |
| # |
| # @chardev: name of a unix socket chardev |
| # |
| # @vhostforce: #optional vhost on for non-MSIX virtio guests (default: false). |
| # |
| # Since 2.1 |
| ## |
| { 'type': 'NetdevVhostUserOptions', |
| 'data': { |
| 'chardev': 'str', |
| '*vhostforce': 'bool' } } |
| |
| ## |
| # @NetClientOptions |
| # |
| # A discriminated record of network device traits. |
| # |
| # Since 1.2 |
| # |
| # 'l2tpv3' - since 2.1 |
| # |
| ## |
| { 'union': 'NetClientOptions', |
| 'data': { |
| 'none': 'NetdevNoneOptions', |
| 'nic': 'NetLegacyNicOptions', |
| 'user': 'NetdevUserOptions', |
| 'tap': 'NetdevTapOptions', |
| 'l2tpv3': 'NetdevL2TPv3Options', |
| 'socket': 'NetdevSocketOptions', |
| 'vde': 'NetdevVdeOptions', |
| 'dump': 'NetdevDumpOptions', |
| 'bridge': 'NetdevBridgeOptions', |
| 'hubport': 'NetdevHubPortOptions', |
| 'netmap': 'NetdevNetmapOptions', |
| 'vhost-user': 'NetdevVhostUserOptions' } } |
| |
| ## |
| # @NetLegacy |
| # |
| # Captures the configuration of a network device; legacy. |
| # |
| # @vlan: #optional vlan number |
| # |
| # @id: #optional identifier for monitor commands |
| # |
| # @name: #optional identifier for monitor commands, ignored if @id is present |
| # |
| # @opts: device type specific properties (legacy) |
| # |
| # Since 1.2 |
| ## |
| { 'type': 'NetLegacy', |
| 'data': { |
| '*vlan': 'int32', |
| '*id': 'str', |
| '*name': 'str', |
| 'opts': 'NetClientOptions' } } |
| |
| ## |
| # @Netdev |
| # |
| # Captures the configuration of a network device. |
| # |
| # @id: identifier for monitor commands. |
| # |
| # @opts: device type specific properties |
| # |
| # Since 1.2 |
| ## |
| { 'type': 'Netdev', |
| 'data': { |
| 'id': 'str', |
| 'opts': 'NetClientOptions' } } |
| |
| ## |
| # @InetSocketAddress |
| # |
| # Captures a socket address or address range in the Internet namespace. |
| # |
| # @host: host part of the address |
| # |
| # @port: port part of the address, or lowest port if @to is present |
| # |
| # @to: highest port to try |
| # |
| # @ipv4: whether to accept IPv4 addresses, default try both IPv4 and IPv6 |
| # #optional |
| # |
| # @ipv6: whether to accept IPv6 addresses, default try both IPv4 and IPv6 |
| # #optional |
| # |
| # Since 1.3 |
| ## |
| { 'type': 'InetSocketAddress', |
| 'data': { |
| 'host': 'str', |
| 'port': 'str', |
| '*to': 'uint16', |
| '*ipv4': 'bool', |
| '*ipv6': 'bool' } } |
| |
| ## |
| # @UnixSocketAddress |
| # |
| # Captures a socket address in the local ("Unix socket") namespace. |
| # |
| # @path: filesystem path to use |
| # |
| # Since 1.3 |
| ## |
| { 'type': 'UnixSocketAddress', |
| 'data': { |
| 'path': 'str' } } |
| |
| ## |
| # @SocketAddress |
| # |
| # Captures the address of a socket, which could also be a named file descriptor |
| # |
| # Since 1.3 |
| ## |
| { 'union': 'SocketAddress', |
| 'data': { |
| 'inet': 'InetSocketAddress', |
| 'unix': 'UnixSocketAddress', |
| 'fd': 'String' } } |
| |
| ## |
| # @getfd: |
| # |
| # Receive a file descriptor via SCM rights and assign it a name |
| # |
| # @fdname: file descriptor name |
| # |
| # Returns: Nothing on success |
| # |
| # Since: 0.14.0 |
| # |
| # Notes: If @fdname already exists, the file descriptor assigned to |
| # it will be closed and replaced by the received file |
| # descriptor. |
| # The 'closefd' command can be used to explicitly close the |
| # file descriptor when it is no longer needed. |
| ## |
| { 'command': 'getfd', 'data': {'fdname': 'str'} } |
| |
| ## |
| # @closefd: |
| # |
| # Close a file descriptor previously passed via SCM rights |
| # |
| # @fdname: file descriptor name |
| # |
| # Returns: Nothing on success |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'closefd', 'data': {'fdname': 'str'} } |
| |
| ## |
| # @MachineInfo: |
| # |
| # Information describing a machine. |
| # |
| # @name: the name of the machine |
| # |
| # @alias: #optional an alias for the machine name |
| # |
| # @default: #optional whether the machine is default |
| # |
| # @cpu-max: maximum number of CPUs supported by the machine type |
| # (since 1.5.0) |
| # |
| # Since: 1.2.0 |
| ## |
| { 'type': 'MachineInfo', |
| 'data': { 'name': 'str', '*alias': 'str', |
| '*is-default': 'bool', 'cpu-max': 'int' } } |
| |
| ## |
| # @query-machines: |
| # |
| # Return a list of supported machines |
| # |
| # Returns: a list of MachineInfo |
| # |
| # Since: 1.2.0 |
| ## |
| { 'command': 'query-machines', 'returns': ['MachineInfo'] } |
| |
| ## |
| # @CpuDefinitionInfo: |
| # |
| # Virtual CPU definition. |
| # |
| # @name: the name of the CPU definition |
| # |
| # Since: 1.2.0 |
| ## |
| { 'type': 'CpuDefinitionInfo', |
| 'data': { 'name': 'str' } } |
| |
| ## |
| # @query-cpu-definitions: |
| # |
| # Return a list of supported virtual CPU definitions |
| # |
| # Returns: a list of CpuDefInfo |
| # |
| # Since: 1.2.0 |
| ## |
| { 'command': 'query-cpu-definitions', 'returns': ['CpuDefinitionInfo'] } |
| |
| # @AddfdInfo: |
| # |
| # Information about a file descriptor that was added to an fd set. |
| # |
| # @fdset-id: The ID of the fd set that @fd was added to. |
| # |
| # @fd: The file descriptor that was received via SCM rights and |
| # added to the fd set. |
| # |
| # Since: 1.2.0 |
| ## |
| { 'type': 'AddfdInfo', 'data': {'fdset-id': 'int', 'fd': 'int'} } |
| |
| ## |
| # @add-fd: |
| # |
| # Add a file descriptor, that was passed via SCM rights, to an fd set. |
| # |
| # @fdset-id: #optional The ID of the fd set to add the file descriptor to. |
| # |
| # @opaque: #optional A free-form string that can be used to describe the fd. |
| # |
| # Returns: @AddfdInfo on success |
| # If file descriptor was not received, FdNotSupplied |
| # If @fdset-id is a negative value, InvalidParameterValue |
| # |
| # Notes: The list of fd sets is shared by all monitor connections. |
| # |
| # If @fdset-id is not specified, a new fd set will be created. |
| # |
| # Since: 1.2.0 |
| ## |
| { 'command': 'add-fd', 'data': {'*fdset-id': 'int', '*opaque': 'str'}, |
| 'returns': 'AddfdInfo' } |
| |
| ## |
| # @remove-fd: |
| # |
| # Remove a file descriptor from an fd set. |
| # |
| # @fdset-id: The ID of the fd set that the file descriptor belongs to. |
| # |
| # @fd: #optional The file descriptor that is to be removed. |
| # |
| # Returns: Nothing on success |
| # If @fdset-id or @fd is not found, FdNotFound |
| # |
| # Since: 1.2.0 |
| # |
| # Notes: The list of fd sets is shared by all monitor connections. |
| # |
| # If @fd is not specified, all file descriptors in @fdset-id |
| # will be removed. |
| ## |
| { 'command': 'remove-fd', 'data': {'fdset-id': 'int', '*fd': 'int'} } |
| |
| ## |
| # @FdsetFdInfo: |
| # |
| # Information about a file descriptor that belongs to an fd set. |
| # |
| # @fd: The file descriptor value. |
| # |
| # @opaque: #optional A free-form string that can be used to describe the fd. |
| # |
| # Since: 1.2.0 |
| ## |
| { 'type': 'FdsetFdInfo', |
| 'data': {'fd': 'int', '*opaque': 'str'} } |
| |
| ## |
| # @FdsetInfo: |
| # |
| # Information about an fd set. |
| # |
| # @fdset-id: The ID of the fd set. |
| # |
| # @fds: A list of file descriptors that belong to this fd set. |
| # |
| # Since: 1.2.0 |
| ## |
| { 'type': 'FdsetInfo', |
| 'data': {'fdset-id': 'int', 'fds': ['FdsetFdInfo']} } |
| |
| ## |
| # @query-fdsets: |
| # |
| # Return information describing all fd sets. |
| # |
| # Returns: A list of @FdsetInfo |
| # |
| # Since: 1.2.0 |
| # |
| # Note: The list of fd sets is shared by all monitor connections. |
| # |
| ## |
| { 'command': 'query-fdsets', 'returns': ['FdsetInfo'] } |
| |
| ## |
| # @TargetInfo: |
| # |
| # Information describing the QEMU target. |
| # |
| # @arch: the target architecture (eg "x86_64", "i386", etc) |
| # |
| # Since: 1.2.0 |
| ## |
| { 'type': 'TargetInfo', |
| 'data': { 'arch': 'str' } } |
| |
| ## |
| # @query-target: |
| # |
| # Return information about the target for this QEMU |
| # |
| # Returns: TargetInfo |
| # |
| # Since: 1.2.0 |
| ## |
| { 'command': 'query-target', 'returns': 'TargetInfo' } |
| |
| ## |
| # @QKeyCode: |
| # |
| # An enumeration of key name. |
| # |
| # This is used by the send-key command. |
| # |
| # Since: 1.3.0 |
| # |
| # 'unmapped' and 'pause' since 2.0 |
| ## |
| { 'enum': 'QKeyCode', |
| 'data': [ 'unmapped', |
| 'shift', 'shift_r', 'alt', 'alt_r', 'altgr', 'altgr_r', 'ctrl', |
| 'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8', |
| '9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e', |
| 'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right', |
| 'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon', |
| 'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b', |
| 'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock', |
| 'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10', |
| 'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply', |
| 'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0', |
| 'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8', |
| 'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end', |
| 'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again', |
| 'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut', |
| 'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause' ] } |
| |
| ## |
| # @KeyValue |
| # |
| # Represents a keyboard key. |
| # |
| # Since: 1.3.0 |
| ## |
| { 'union': 'KeyValue', |
| 'data': { |
| 'number': 'int', |
| 'qcode': 'QKeyCode' } } |
| |
| ## |
| # @send-key: |
| # |
| # Send keys to guest. |
| # |
| # @keys: An array of @KeyValue elements. All @KeyValues in this array are |
| # simultaneously sent to the guest. A @KeyValue.number value is sent |
| # directly to the guest, while @KeyValue.qcode must be a valid |
| # @QKeyCode value |
| # |
| # @hold-time: #optional time to delay key up events, milliseconds. Defaults |
| # to 100 |
| # |
| # Returns: Nothing on success |
| # If key is unknown or redundant, InvalidParameter |
| # |
| # Since: 1.3.0 |
| # |
| ## |
| { 'command': 'send-key', |
| 'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } } |
| |
| ## |
| # @screendump: |
| # |
| # Write a PPM of the VGA screen to a file. |
| # |
| # @filename: the path of a new PPM file to store the image |
| # |
| # Returns: Nothing on success |
| # |
| # Since: 0.14.0 |
| ## |
| { 'command': 'screendump', 'data': {'filename': 'str'} } |
| |
| ## |
| # @ChardevFile: |
| # |
| # Configuration info for file chardevs. |
| # |
| # @in: #optional The name of the input file |
| # @out: The name of the output file |
| # |
| # Since: 1.4 |
| ## |
| { 'type': 'ChardevFile', 'data': { '*in' : 'str', |
| 'out' : 'str' } } |
| |
| ## |
| # @ChardevHostdev: |
| # |
| # Configuration info for device and pipe chardevs. |
| # |
| # @device: The name of the special file for the device, |
| # i.e. /dev/ttyS0 on Unix or COM1: on Windows |
| # @type: What kind of device this is. |
| # |
| # Since: 1.4 |
| ## |
| { 'type': 'ChardevHostdev', 'data': { 'device' : 'str' } } |
| |
| ## |
| # @ChardevSocket: |
| # |
| # Configuration info for (stream) socket chardevs. |
| # |
| # @addr: socket address to listen on (server=true) |
| # or connect to (server=false) |
| # @server: #optional create server socket (default: true) |
| # @wait: #optional wait for incoming connection on server |
| # sockets (default: false). |
| # @nodelay: #optional set TCP_NODELAY socket option (default: false) |
| # @telnet: #optional enable telnet protocol on server |
| # sockets (default: false) |
| # @reconnect: #optional For a client socket, if a socket is disconnected, |
| # then attempt a reconnect after the given number of seconds. |
| # Setting this to zero disables this function. (default: 0) |
| # (Since: 2.2) |
| # |
| # Since: 1.4 |
| ## |
| { 'type': 'ChardevSocket', 'data': { 'addr' : 'SocketAddress', |
| '*server' : 'bool', |
| '*wait' : 'bool', |
| '*nodelay' : 'bool', |
| '*telnet' : 'bool', |
| '*reconnect' : 'int' } } |
| |
| ## |
| # @ChardevUdp: |
| # |
| # Configuration info for datagram socket chardevs. |
| # |
| # @remote: remote address |
| # @local: #optional local address |
| # |
| # Since: 1.5 |
| ## |
| { 'type': 'ChardevUdp', 'data': { 'remote' : 'SocketAddress', |
| '*local' : 'SocketAddress' } } |
| |
| ## |
| # @ChardevMux: |
| # |
| # Configuration info for mux chardevs. |
| # |
| # @chardev: name of the base chardev. |
| # |
| # Since: 1.5 |
| ## |
| { 'type': 'ChardevMux', 'data': { 'chardev' : 'str' } } |
| |
| ## |
| # @ChardevStdio: |
| # |
| # Configuration info for stdio chardevs. |
| # |
| # @signal: #optional Allow signals (such as SIGINT triggered by ^C) |
| # be delivered to qemu. Default: true in -nographic mode, |
| # false otherwise. |
| # |
| # Since: 1.5 |
| ## |
| { 'type': 'ChardevStdio', 'data': { '*signal' : 'bool' } } |
| |
| ## |
| # @ChardevSpiceChannel: |
| # |
| # Configuration info for spice vm channel chardevs. |
| # |
| # @type: kind of channel (for example vdagent). |
| # |
| # Since: 1.5 |
| ## |
| { 'type': 'ChardevSpiceChannel', 'data': { 'type' : 'str' } } |
| |
| ## |
| # @ChardevSpicePort: |
| # |
| # Configuration info for spice port chardevs. |
| # |
| # @fqdn: name of the channel (see docs/spice-port-fqdn.txt) |
| # |
| # Since: 1.5 |
| ## |
| { 'type': 'ChardevSpicePort', 'data': { 'fqdn' : 'str' } } |
| |
| ## |
| # @ChardevVC: |
| # |
| # Configuration info for virtual console chardevs. |
| # |
| # @width: console width, in pixels |
| # @height: console height, in pixels |
| # @cols: console width, in chars |
| # @rows: console height, in chars |
| # |
| # Since: 1.5 |
| ## |
| { 'type': 'ChardevVC', 'data': { '*width' : 'int', |
| '*height' : 'int', |
| '*cols' : 'int', |
| '*rows' : 'int' } } |
| |
| ## |
| # @ChardevRingbuf: |
| # |
| # Configuration info for ring buffer chardevs. |
| # |
| # @size: #optional ring buffer size, must be power of two, default is 65536 |
| # |
| # Since: 1.5 |
| ## |
| { 'type': 'ChardevRingbuf', 'data': { '*size' : 'int' } } |
| |
| ## |
| # @ChardevBackend: |
| # |
| # Configuration info for the new chardev backend. |
| # |
| # Since: 1.4 (testdev since 2.2) |
| ## |
| { 'type': 'ChardevDummy', 'data': { } } |
| |
| { 'union': 'ChardevBackend', 'data': { 'file' : 'ChardevFile', |
| 'serial' : 'ChardevHostdev', |
| 'parallel': 'ChardevHostdev', |
| 'pipe' : 'ChardevHostdev', |
| 'socket' : 'ChardevSocket', |
| 'udp' : 'ChardevUdp', |
| 'pty' : 'ChardevDummy', |
| 'null' : 'ChardevDummy', |
| 'mux' : 'ChardevMux', |
| 'msmouse': 'ChardevDummy', |
| 'braille': 'ChardevDummy', |
| 'testdev': 'ChardevDummy', |
| 'stdio' : 'ChardevStdio', |
| 'console': 'ChardevDummy', |
| 'spicevmc' : 'ChardevSpiceChannel', |
| 'spiceport' : 'ChardevSpicePort', |
| 'vc' : 'ChardevVC', |
| 'ringbuf': 'ChardevRingbuf', |
| # next one is just for compatibility |
| 'memory' : 'ChardevRingbuf' } } |
| |
| ## |
| # @ChardevReturn: |
| # |
| # Return info about the chardev backend just created. |
| # |
| # @pty: #optional name of the slave pseudoterminal device, present if |
| # and only if a chardev of type 'pty' was created |
| # |
| # Since: 1.4 |
| ## |
| { 'type' : 'ChardevReturn', 'data': { '*pty' : 'str' } } |
| |
| ## |
| # @chardev-add: |
| # |
| # Add a character device backend |
| # |
| # @id: the chardev's ID, must be unique |
| # @backend: backend type and parameters |
| # |
| # Returns: ChardevReturn. |
| # |
| # Since: 1.4 |
| ## |
| { 'command': 'chardev-add', 'data': {'id' : 'str', |
| 'backend' : 'ChardevBackend' }, |
| 'returns': 'ChardevReturn' } |
| |
| ## |
| # @chardev-remove: |
| # |
| # Remove a character device backend |
| # |
| # @id: the chardev's ID, must exist and not be in use |
| # |
| # Returns: Nothing on success |
| # |
| # Since: 1.4 |
| ## |
| { 'command': 'chardev-remove', 'data': {'id': 'str'} } |
| |
| ## |
| # @TpmModel: |
| # |
| # An enumeration of TPM models |
| # |
| # @tpm-tis: TPM TIS model |
| # |
| # Since: 1.5 |
| ## |
| { 'enum': 'TpmModel', 'data': [ 'tpm-tis' ] } |
| |
| ## |
| # @query-tpm-models: |
| # |
| # Return a list of supported TPM models |
| # |
| # Returns: a list of TpmModel |
| # |
| # Since: 1.5 |
| ## |
| { 'command': 'query-tpm-models', 'returns': ['TpmModel'] } |
| |
| ## |
| # @TpmType: |
| # |
| # An enumeration of TPM types |
| # |
| # @passthrough: TPM passthrough type |
| # |
| # Since: 1.5 |
| ## |
| { 'enum': 'TpmType', 'data': [ 'passthrough' ] } |
| |
| ## |
| # @query-tpm-types: |
| # |
| # Return a list of supported TPM types |
| # |
| # Returns: a list of TpmType |
| # |
| # Since: 1.5 |
| ## |
| { 'command': 'query-tpm-types', 'returns': ['TpmType'] } |
| |
| ## |
| # @TPMPassthroughOptions: |
| # |
| # Information about the TPM passthrough type |
| # |
| # @path: #optional string describing the path used for accessing the TPM device |
| # |
| # @cancel-path: #optional string showing the TPM's sysfs cancel file |
| # for cancellation of TPM commands while they are executing |
| # |
| # Since: 1.5 |
| ## |
| { 'type': 'TPMPassthroughOptions', 'data': { '*path' : 'str', |
| '*cancel-path' : 'str'} } |
| |
| ## |
| # @TpmTypeOptions: |
| # |
| # A union referencing different TPM backend types' configuration options |
| # |
| # @passthrough: The configuration options for the TPM passthrough type |
| # |
| # Since: 1.5 |
| ## |
| { 'union': 'TpmTypeOptions', |
| 'data': { 'passthrough' : 'TPMPassthroughOptions' } } |
| |
| ## |
| # @TpmInfo: |
| # |
| # Information about the TPM |
| # |
| # @id: The Id of the TPM |
| # |
| # @model: The TPM frontend model |
| # |
| # @options: The TPM (backend) type configuration options |
| # |
| # Since: 1.5 |
| ## |
| { 'type': 'TPMInfo', |
| 'data': {'id': 'str', |
| 'model': 'TpmModel', |
| 'options': 'TpmTypeOptions' } } |
| |
| ## |
| # @query-tpm: |
| # |
| # Return information about the TPM device |
| # |
| # Returns: @TPMInfo on success |
| # |
| # Since: 1.5 |
| ## |
| { 'command': 'query-tpm', 'returns': ['TPMInfo'] } |
| |
| ## |
| # @AcpiTableOptions |
| # |
| # Specify an ACPI table on the command line to load. |
| # |
| # At most one of @file and @data can be specified. The list of files specified |
| # by any one of them is loaded and concatenated in order. If both are omitted, |
| # @data is implied. |
| # |
| # Other fields / optargs can be used to override fields of the generic ACPI |
| # table header; refer to the ACPI specification 5.0, section 5.2.6 System |
| # Description Table Header. If a header field is not overridden, then the |
| # corresponding value from the concatenated blob is used (in case of @file), or |
| # it is filled in with a hard-coded value (in case of @data). |
| # |
| # String fields are copied into the matching ACPI member from lowest address |
| # upwards, and silently truncated / NUL-padded to length. |
| # |
| # @sig: #optional table signature / identifier (4 bytes) |
| # |
| # @rev: #optional table revision number (dependent on signature, 1 byte) |
| # |
| # @oem_id: #optional OEM identifier (6 bytes) |
| # |
| # @oem_table_id: #optional OEM table identifier (8 bytes) |
| # |
| # @oem_rev: #optional OEM-supplied revision number (4 bytes) |
| # |
| # @asl_compiler_id: #optional identifier of the utility that created the table |
| # (4 bytes) |
| # |
| # @asl_compiler_rev: #optional revision number of the utility that created the |
| # table (4 bytes) |
| # |
| # @file: #optional colon (:) separated list of pathnames to load and |
| # concatenate as table data. The resultant binary blob is expected to |
| # have an ACPI table header. At least one file is required. This field |
| # excludes @data. |
| # |
| # @data: #optional colon (:) separated list of pathnames to load and |
| # concatenate as table data. The resultant binary blob must not have an |
| # ACPI table header. At least one file is required. This field excludes |
| # @file. |
| # |
| # Since 1.5 |
| ## |
| { 'type': 'AcpiTableOptions', |
| 'data': { |
| '*sig': 'str', |
| '*rev': 'uint8', |
| '*oem_id': 'str', |
| '*oem_table_id': 'str', |
| '*oem_rev': 'uint32', |
| '*asl_compiler_id': 'str', |
| '*asl_compiler_rev': 'uint32', |
| '*file': 'str', |
| '*data': 'str' }} |
| |
| ## |
| # @CommandLineParameterType: |
| # |
| # Possible types for an option parameter. |
| # |
| # @string: accepts a character string |
| # |
| # @boolean: accepts "on" or "off" |
| # |
| # @number: accepts a number |
| # |
| # @size: accepts a number followed by an optional suffix (K)ilo, |
| # (M)ega, (G)iga, (T)era |
| # |
| # Since 1.5 |
| ## |
| { 'enum': 'CommandLineParameterType', |
| 'data': ['string', 'boolean', 'number', 'size'] } |
| |
| ## |
| # @CommandLineParameterInfo: |
| # |
| # Details about a single parameter of a command line option. |
| # |
| # @name: parameter name |
| # |
| # @type: parameter @CommandLineParameterType |
| # |
| # @help: #optional human readable text string, not suitable for parsing. |
| # |
| # @default: #optional default value string (since 2.1) |
| # |
| # Since 1.5 |
| ## |
| { 'type': 'CommandLineParameterInfo', |
| 'data': { 'name': 'str', |
| 'type': 'CommandLineParameterType', |
| '*help': 'str', |
| '*default': 'str' } } |
| |
| ## |
| # @CommandLineOptionInfo: |
| # |
| # Details about a command line option, including its list of parameter details |
| # |
| # @option: option name |
| # |
| # @parameters: an array of @CommandLineParameterInfo |
| # |
| # Since 1.5 |
| ## |
| { 'type': 'CommandLineOptionInfo', |
| 'data': { 'option': 'str', 'parameters': ['CommandLineParameterInfo'] } } |
| |
| ## |
| # @query-command-line-options: |
| # |
| # Query command line option schema. |
| # |
| # @option: #optional option name |
| # |
| # Returns: list of @CommandLineOptionInfo for all options (or for the given |
| # @option). Returns an error if the given @option doesn't exist. |
| # |
| # Since 1.5 |
| ## |
| {'command': 'query-command-line-options', 'data': { '*option': 'str' }, |
| 'returns': ['CommandLineOptionInfo'] } |
| |
| ## |
| # @X86CPURegister32 |
| # |
| # A X86 32-bit register |
| # |
| # Since: 1.5 |
| ## |
| { 'enum': 'X86CPURegister32', |
| 'data': [ 'EAX', 'EBX', 'ECX', 'EDX', 'ESP', 'EBP', 'ESI', 'EDI' ] } |
| |
| ## |
| # @X86CPUFeatureWordInfo |
| # |
| # Information about a X86 CPU feature word |
| # |
| # @cpuid-input-eax: Input EAX value for CPUID instruction for that feature word |
| # |
| # @cpuid-input-ecx: #optional Input ECX value for CPUID instruction for that |
| # feature word |
| # |
| # @cpuid-register: Output register containing the feature bits |
| # |
| # @features: value of output register, containing the feature bits |
| # |
| # Since: 1.5 |
| ## |
| { 'type': 'X86CPUFeatureWordInfo', |
| 'data': { 'cpuid-input-eax': 'int', |
| '*cpuid-input-ecx': 'int', |
| 'cpuid-register': 'X86CPURegister32', |
| 'features': 'int' } } |
| |
| ## |
| # @RxState: |
| # |
| # Packets receiving state |
| # |
| # @normal: filter assigned packets according to the mac-table |
| # |
| # @none: don't receive any assigned packet |
| # |
| # @all: receive all assigned packets |
| # |
| # Since: 1.6 |
| ## |
| { 'enum': 'RxState', 'data': [ 'normal', 'none', 'all' ] } |
| |
| ## |
| # @RxFilterInfo: |
| # |
| # Rx-filter information for a NIC. |
| # |
| # @name: net client name |
| # |
| # @promiscuous: whether promiscuous mode is enabled |
| # |
| # @multicast: multicast receive state |
| # |
| # @unicast: unicast receive state |
| # |
| # @vlan: vlan receive state (Since 2.0) |
| # |
| # @broadcast-allowed: whether to receive broadcast |
| # |
| # @multicast-overflow: multicast table is overflowed or not |
| # |
| # @unicast-overflow: unicast table is overflowed or not |
| # |
| # @main-mac: the main macaddr string |
| # |
| # @vlan-table: a list of active vlan id |
| # |
| # @unicast-table: a list of unicast macaddr string |
| # |
| # @multicast-table: a list of multicast macaddr string |
| # |
| # Since 1.6 |
| ## |
| |
| { 'type': 'RxFilterInfo', |
| 'data': { |
| 'name': 'str', |
| 'promiscuous': 'bool', |
| 'multicast': 'RxState', |
| 'unicast': 'RxState', |
| 'vlan': 'RxState', |
| 'broadcast-allowed': 'bool', |
| 'multicast-overflow': 'bool', |
| 'unicast-overflow': 'bool', |
| 'main-mac': 'str', |
| 'vlan-table': ['int'], |
| 'unicast-table': ['str'], |
| 'multicast-table': ['str'] }} |
| |
| ## |
| # @query-rx-filter: |
| # |
| # Return rx-filter information for all NICs (or for the given NIC). |
| # |
| # @name: #optional net client name |
| # |
| # Returns: list of @RxFilterInfo for all NICs (or for the given NIC). |
| # Returns an error if the given @name doesn't exist, or given |
| # NIC doesn't support rx-filter querying, or given net client |
| # isn't a NIC. |
| # |
| # Since: 1.6 |
| ## |
| { 'command': 'query-rx-filter', 'data': { '*name': 'str' }, |
| 'returns': ['RxFilterInfo'] } |
| |
| ## |
| # @InputButton |
| # |
| # Button of a pointer input device (mouse, tablet). |
| # |
| # Since: 2.0 |
| ## |
| { 'enum' : 'InputButton', |
| 'data' : [ 'Left', 'Middle', 'Right', 'WheelUp', 'WheelDown' ] } |
| |
| ## |
| # @InputButton |
| # |
| # Position axis of a pointer input device (mouse, tablet). |
| # |
| # Since: 2.0 |
| ## |
| { 'enum' : 'InputAxis', |
| 'data' : [ 'X', 'Y' ] } |
| |
| ## |
| # @InputKeyEvent |
| # |
| # Keyboard input event. |
| # |
| # @key: Which key this event is for. |
| # @down: True for key-down and false for key-up events. |
| # |
| # Since: 2.0 |
| ## |
| { 'type' : 'InputKeyEvent', |
| 'data' : { 'key' : 'KeyValue', |
| 'down' : 'bool' } } |
| |
| ## |
| # @InputBtnEvent |
| # |
| # Pointer button input event. |
| # |
| # @button: Which button this event is for. |
| # @down: True for key-down and false for key-up events. |
| # |
| # Since: 2.0 |
| ## |
| { 'type' : 'InputBtnEvent', |
| 'data' : { 'button' : 'InputButton', |
| 'down' : 'bool' } } |
| |
| ## |
| # @InputMoveEvent |
| # |
| # Pointer motion input event. |
| # |
| # @axis: Which axis is referenced by @value. |
| # @value: Pointer position. For absolute coordinates the |
| # valid range is 0 -> 0x7ffff |
| # |
| # Since: 2.0 |
| ## |
| { 'type' : 'InputMoveEvent', |
| 'data' : { 'axis' : 'InputAxis', |
| 'value' : 'int' } } |
| |
| ## |
| # @InputEvent |
| # |
| # Input event union. |
| # |
| # @key: Input event of Keyboard |
| # @btn: Input event of pointer buttons |
| # @rel: Input event of relative pointer motion |
| # @abs: Input event of absolute pointer motion |
| # |
| # Since: 2.0 |
| ## |
| { 'union' : 'InputEvent', |
| 'data' : { 'key' : 'InputKeyEvent', |
| 'btn' : 'InputBtnEvent', |
| 'rel' : 'InputMoveEvent', |
| 'abs' : 'InputMoveEvent' } } |
| |
| ## |
| # @input-send-event |
| # |
| # Send input event(s) to guest. |
| # |
| # @console: #optional console to send event(s) to. |
| # |
| # @events: List of InputEvent union. |
| # |
| # Returns: Nothing on success. |
| # |
| # Since: 2.2 |
| # |
| ## |
| { 'command': 'input-send-event', |
| 'data': { '*console':'int', 'events': [ 'InputEvent' ] } } |
| |
| ## |
| # @NumaOptions |
| # |
| # A discriminated record of NUMA options. (for OptsVisitor) |
| # |
| # Since 2.1 |
| ## |
| { 'union': 'NumaOptions', |
| 'data': { |
| 'node': 'NumaNodeOptions' }} |
| |
| ## |
| # @NumaNodeOptions |
| # |
| # Create a guest NUMA node. (for OptsVisitor) |
| # |
| # @nodeid: #optional NUMA node ID (increase by 1 from 0 if omitted) |
| # |
| # @cpus: #optional VCPUs belonging to this node (assign VCPUS round-robin |
| # if omitted) |
| # |
| # @mem: #optional memory size of this node; mutually exclusive with @memdev. |
| # Equally divide total memory among nodes if both @mem and @memdev are |
| # omitted. |
| # |
| # @memdev: #optional memory backend object. If specified for one node, |
| # it must be specified for all nodes. |
| # |
| # Since: 2.1 |
| ## |
| { 'type': 'NumaNodeOptions', |
| 'data': { |
| '*nodeid': 'uint16', |
| '*cpus': ['uint16'], |
| '*mem': 'size', |
| '*memdev': 'str' }} |
| |
| ## |
| # @HostMemPolicy |
| # |
| # Host memory policy types |
| # |
| # @default: restore default policy, remove any nondefault policy |
| # |
| # @preferred: set the preferred host nodes for allocation |
| # |
| # @bind: a strict policy that restricts memory allocation to the |
| # host nodes specified |
| # |
| # @interleave: memory allocations are interleaved across the set |
| # of host nodes specified |
| # |
| # Since 2.1 |
| ## |
| { 'enum': 'HostMemPolicy', |
| 'data': [ 'default', 'preferred', 'bind', 'interleave' ] } |
| |
| ## |
| # @Memdev: |
| # |
| # Information about memory backend |
| # |
| # @size: memory backend size |
| # |
| # @merge: enables or disables memory merge support |
| # |
| # @dump: includes memory backend's memory in a core dump or not |
| # |
| # @prealloc: enables or disables memory preallocation |
| # |
| # @host-nodes: host nodes for its memory policy |
| # |
| # @policy: memory policy of memory backend |
| # |
| # Since: 2.1 |
| ## |
| |
| { 'type': 'Memdev', |
| 'data': { |
| 'size': 'size', |
| 'merge': 'bool', |
| 'dump': 'bool', |
| 'prealloc': 'bool', |
| 'host-nodes': ['uint16'], |
| 'policy': 'HostMemPolicy' }} |
| |
| ## |
| # @query-memdev: |
| # |
| # Returns information for all memory backends. |
| # |
| # Returns: a list of @Memdev. |
| # |
| # Since: 2.1 |
| ## |
| { 'command': 'query-memdev', 'returns': ['Memdev'] } |
| |
| ## |
| # @PCDIMMDeviceInfo: |
| # |
| # PCDIMMDevice state information |
| # |
| # @id: #optional device's ID |
| # |
| # @addr: physical address, where device is mapped |
| # |
| # @size: size of memory that the device provides |
| # |
| # @slot: slot number at which device is plugged in |
| # |
| # @node: NUMA node number where device is plugged in |
| # |
| # @memdev: memory backend linked with device |
| # |
| # @hotplugged: true if device was hotplugged |
| # |
| # @hotpluggable: true if device if could be added/removed while machine is running |
| # |
| # Since: 2.1 |
| ## |
| { 'type': 'PCDIMMDeviceInfo', |
| 'data': { '*id': 'str', |
| 'addr': 'int', |
| 'size': 'int', |
| 'slot': 'int', |
| 'node': 'int', |
| 'memdev': 'str', |
| 'hotplugged': 'bool', |
| 'hotpluggable': 'bool' |
| } |
| } |
| |
| ## |
| # @MemoryDeviceInfo: |
| # |
| # Union containing information about a memory device |
| # |
| # Since: 2.1 |
| ## |
| { 'union': 'MemoryDeviceInfo', 'data': {'dimm': 'PCDIMMDeviceInfo'} } |
| |
| ## |
| # @query-memory-devices |
| # |
| # Lists available memory devices and their state |
| # |
| # Since: 2.1 |
| ## |
| { 'command': 'query-memory-devices', 'returns': ['MemoryDeviceInfo'] } |
| |
| ## @ACPISlotType |
| # |
| # @DIMM: memory slot |
| # |
| { 'enum': 'ACPISlotType', 'data': [ 'DIMM' ] } |
| |
| ## @ACPIOSTInfo |
| # |
| # OSPM Status Indication for a device |
| # For description of possible values of @source and @status fields |
| # see "_OST (OSPM Status Indication)" chapter of ACPI5.0 spec. |
| # |
| # @device: #optional device ID associated with slot |
| # |
| # @slot: slot ID, unique per slot of a given @slot-type |
| # |
| # @slot-type: type of the slot |
| # |
| # @source: an integer containing the source event |
| # |
| # @status: an integer containing the status code |
| # |
| # Since: 2.1 |
| ## |
| { 'type': 'ACPIOSTInfo', |
| 'data' : { '*device': 'str', |
| 'slot': 'str', |
| 'slot-type': 'ACPISlotType', |
| 'source': 'int', |
| 'status': 'int' } } |
| |
| ## |
| # @query-acpi-ospm-status |
| # |
| # Lists ACPI OSPM status of ACPI device objects, |
| # which might be reported via _OST method |
| # |
| # Since: 2.1 |
| ## |
| { 'command': 'query-acpi-ospm-status', 'returns': ['ACPIOSTInfo'] } |
| |
| ## |
| # @WatchdogExpirationAction |
| # |
| # An enumeration of the actions taken when the watchdog device's timer is |
| # expired |
| # |
| # @reset: system resets |
| # |
| # @shutdown: system shutdown, note that it is similar to @powerdown, which |
| # tries to set to system status and notify guest |
| # |
| # @poweroff: system poweroff, the emulator program exits |
| # |
| # @pause: system pauses, similar to @stop |
| # |
| # @debug: system enters debug state |
| # |
| # @none: nothing is done |
| # |
| # Since: 2.1 |
| ## |
| { 'enum': 'WatchdogExpirationAction', |
| 'data': [ 'reset', 'shutdown', 'poweroff', 'pause', 'debug', 'none' ] } |
| |
| ## |
| # @IoOperationType |
| # |
| # An enumeration of the I/O operation types |
| # |
| # @read: read operation |
| # |
| # @write: write operation |
| # |
| # Since: 2.1 |
| ## |
| { 'enum': 'IoOperationType', |
| 'data': [ 'read', 'write' ] } |
| |
| ## |
| # @GuestPanicAction |
| # |
| # An enumeration of the actions taken when guest OS panic is detected |
| # |
| # @pause: system pauses |
| # |
| # Since: 2.1 |
| ## |
| { 'enum': 'GuestPanicAction', |
| 'data': [ 'pause' ] } |
| |
| ## |
| # @rtc-reset-reinjection |
| # |
| # This command will reset the RTC interrupt reinjection backlog. |
| # Can be used if another mechanism to synchronize guest time |
| # is in effect, for example QEMU guest agent's guest-set-time |
| # command. |
| # |
| # Since: 2.1 |
| ## |
| { 'command': 'rtc-reset-reinjection' } |