| /* General "disassemble this chunk" code. Used for debugging. */ |
| #include "config.h" |
| #include "dis-asm.h" |
| #include "elf.h" |
| #include <errno.h> |
| |
| #include "cpu.h" |
| #include "exec-all.h" |
| #include "disas.h" |
| |
| /* Filled in by elfload.c. Simplistic, but will do for now. */ |
| struct syminfo *syminfos = NULL; |
| |
| /* Get LENGTH bytes from info's buffer, at target address memaddr. |
| Transfer them to myaddr. */ |
| int |
| buffer_read_memory(bfd_vma memaddr, bfd_byte *myaddr, int length, |
| struct disassemble_info *info) |
| { |
| if (memaddr < info->buffer_vma |
| || memaddr + length > info->buffer_vma + info->buffer_length) |
| /* Out of bounds. Use EIO because GDB uses it. */ |
| return EIO; |
| memcpy (myaddr, info->buffer + (memaddr - info->buffer_vma), length); |
| return 0; |
| } |
| |
| /* Get LENGTH bytes from info's buffer, at target address memaddr. |
| Transfer them to myaddr. */ |
| static int |
| target_read_memory (bfd_vma memaddr, |
| bfd_byte *myaddr, |
| int length, |
| struct disassemble_info *info) |
| { |
| cpu_memory_rw_debug(cpu_single_env, memaddr, myaddr, length, 0); |
| return 0; |
| } |
| |
| /* Print an error message. We can assume that this is in response to |
| an error return from buffer_read_memory. */ |
| void |
| perror_memory (int status, bfd_vma memaddr, struct disassemble_info *info) |
| { |
| if (status != EIO) |
| /* Can't happen. */ |
| (*info->fprintf_func) (info->stream, "Unknown error %d\n", status); |
| else |
| /* Actually, address between memaddr and memaddr + len was |
| out of bounds. */ |
| (*info->fprintf_func) (info->stream, |
| "Address 0x%" PRIx64 " is out of bounds.\n", memaddr); |
| } |
| |
| /* This could be in a separate file, to save miniscule amounts of space |
| in statically linked executables. */ |
| |
| /* Just print the address is hex. This is included for completeness even |
| though both GDB and objdump provide their own (to print symbolic |
| addresses). */ |
| |
| void |
| generic_print_address (bfd_vma addr, struct disassemble_info *info) |
| { |
| (*info->fprintf_func) (info->stream, "0x%" PRIx64, addr); |
| } |
| |
| /* Just return the given address. */ |
| |
| int |
| generic_symbol_at_address (bfd_vma addr, struct disassemble_info *info) |
| { |
| return 1; |
| } |
| |
| bfd_vma bfd_getl64 (const bfd_byte *addr) |
| { |
| unsigned long long v; |
| |
| v = (unsigned long long) addr[0]; |
| v |= (unsigned long long) addr[1] << 8; |
| v |= (unsigned long long) addr[2] << 16; |
| v |= (unsigned long long) addr[3] << 24; |
| v |= (unsigned long long) addr[4] << 32; |
| v |= (unsigned long long) addr[5] << 40; |
| v |= (unsigned long long) addr[6] << 48; |
| v |= (unsigned long long) addr[7] << 56; |
| return (bfd_vma) v; |
| } |
| |
| bfd_vma bfd_getl32 (const bfd_byte *addr) |
| { |
| unsigned long v; |
| |
| v = (unsigned long) addr[0]; |
| v |= (unsigned long) addr[1] << 8; |
| v |= (unsigned long) addr[2] << 16; |
| v |= (unsigned long) addr[3] << 24; |
| return (bfd_vma) v; |
| } |
| |
| bfd_vma bfd_getb32 (const bfd_byte *addr) |
| { |
| unsigned long v; |
| |
| v = (unsigned long) addr[0] << 24; |
| v |= (unsigned long) addr[1] << 16; |
| v |= (unsigned long) addr[2] << 8; |
| v |= (unsigned long) addr[3]; |
| return (bfd_vma) v; |
| } |
| |
| bfd_vma bfd_getl16 (const bfd_byte *addr) |
| { |
| unsigned long v; |
| |
| v = (unsigned long) addr[0]; |
| v |= (unsigned long) addr[1] << 8; |
| return (bfd_vma) v; |
| } |
| |
| bfd_vma bfd_getb16 (const bfd_byte *addr) |
| { |
| unsigned long v; |
| |
| v = (unsigned long) addr[0] << 24; |
| v |= (unsigned long) addr[1] << 16; |
| return (bfd_vma) v; |
| } |
| |
| #ifdef TARGET_ARM |
| static int |
| print_insn_thumb1(bfd_vma pc, disassemble_info *info) |
| { |
| return print_insn_arm(pc | 1, info); |
| } |
| #endif |
| |
| /* Disassemble this for me please... (debugging). 'flags' has the following |
| values: |
| i386 - nonzero means 16 bit code |
| arm - nonzero means thumb code |
| ppc - nonzero means little endian |
| other targets - unused |
| */ |
| void target_disas(FILE *out, target_ulong code, target_ulong size, int flags) |
| { |
| target_ulong pc; |
| int count; |
| struct disassemble_info disasm_info; |
| int (*print_insn)(bfd_vma pc, disassemble_info *info); |
| |
| INIT_DISASSEMBLE_INFO(disasm_info, out, fprintf); |
| |
| disasm_info.read_memory_func = target_read_memory; |
| disasm_info.buffer_vma = code; |
| disasm_info.buffer_length = size; |
| |
| #ifdef TARGET_WORDS_BIGENDIAN |
| disasm_info.endian = BFD_ENDIAN_BIG; |
| #else |
| disasm_info.endian = BFD_ENDIAN_LITTLE; |
| #endif |
| #if defined(TARGET_I386) |
| if (flags == 2) |
| disasm_info.mach = bfd_mach_x86_64; |
| else if (flags == 1) |
| disasm_info.mach = bfd_mach_i386_i8086; |
| else |
| disasm_info.mach = bfd_mach_i386_i386; |
| print_insn = print_insn_i386; |
| #elif defined(TARGET_ARM) |
| if (flags) |
| print_insn = print_insn_thumb1; |
| else |
| print_insn = print_insn_arm; |
| #elif defined(TARGET_SPARC) |
| print_insn = print_insn_sparc; |
| #ifdef TARGET_SPARC64 |
| disasm_info.mach = bfd_mach_sparc_v9b; |
| #endif |
| #elif defined(TARGET_PPC) |
| if (flags >> 16) |
| disasm_info.endian = BFD_ENDIAN_LITTLE; |
| if (flags & 0xFFFF) { |
| /* If we have a precise definitions of the instructions set, use it */ |
| disasm_info.mach = flags & 0xFFFF; |
| } else { |
| #ifdef TARGET_PPC64 |
| disasm_info.mach = bfd_mach_ppc64; |
| #else |
| disasm_info.mach = bfd_mach_ppc; |
| #endif |
| } |
| print_insn = print_insn_ppc; |
| #elif defined(TARGET_M68K) |
| print_insn = print_insn_m68k; |
| #elif defined(TARGET_MIPS) |
| #ifdef TARGET_WORDS_BIGENDIAN |
| print_insn = print_insn_big_mips; |
| #else |
| print_insn = print_insn_little_mips; |
| #endif |
| #elif defined(TARGET_SH4) |
| disasm_info.mach = bfd_mach_sh4; |
| print_insn = print_insn_sh; |
| #elif defined(TARGET_ALPHA) |
| disasm_info.mach = bfd_mach_alpha; |
| print_insn = print_insn_alpha; |
| #elif defined(TARGET_CRIS) |
| if (flags != 32) { |
| disasm_info.mach = bfd_mach_cris_v0_v10; |
| print_insn = print_insn_crisv10; |
| } else { |
| disasm_info.mach = bfd_mach_cris_v32; |
| print_insn = print_insn_crisv32; |
| } |
| #elif defined(TARGET_MICROBLAZE) |
| disasm_info.mach = bfd_arch_microblaze; |
| print_insn = print_insn_microblaze; |
| #else |
| fprintf(out, "0x" TARGET_FMT_lx |
| ": Asm output not supported on this arch\n", code); |
| return; |
| #endif |
| |
| for (pc = code; size > 0; pc += count, size -= count) { |
| fprintf(out, "0x" TARGET_FMT_lx ": ", pc); |
| count = print_insn(pc, &disasm_info); |
| #if 0 |
| { |
| int i; |
| uint8_t b; |
| fprintf(out, " {"); |
| for(i = 0; i < count; i++) { |
| target_read_memory(pc + i, &b, 1, &disasm_info); |
| fprintf(out, " %02x", b); |
| } |
| fprintf(out, " }"); |
| } |
| #endif |
| fprintf(out, "\n"); |
| if (count < 0) |
| break; |
| if (size < count) { |
| fprintf(out, |
| "Disassembler disagrees with translator over instruction " |
| "decoding\n" |
| "Please report this to qemu-devel@nongnu.org\n"); |
| break; |
| } |
| } |
| } |
| |
| /* Disassemble this for me please... (debugging). */ |
| void disas(FILE *out, void *code, unsigned long size) |
| { |
| unsigned long pc; |
| int count; |
| struct disassemble_info disasm_info; |
| int (*print_insn)(bfd_vma pc, disassemble_info *info); |
| |
| INIT_DISASSEMBLE_INFO(disasm_info, out, fprintf); |
| |
| disasm_info.buffer = code; |
| disasm_info.buffer_vma = (unsigned long)code; |
| disasm_info.buffer_length = size; |
| |
| #ifdef HOST_WORDS_BIGENDIAN |
| disasm_info.endian = BFD_ENDIAN_BIG; |
| #else |
| disasm_info.endian = BFD_ENDIAN_LITTLE; |
| #endif |
| #if defined(__i386__) |
| disasm_info.mach = bfd_mach_i386_i386; |
| print_insn = print_insn_i386; |
| #elif defined(__x86_64__) |
| disasm_info.mach = bfd_mach_x86_64; |
| print_insn = print_insn_i386; |
| #elif defined(_ARCH_PPC) |
| print_insn = print_insn_ppc; |
| #elif defined(__alpha__) |
| print_insn = print_insn_alpha; |
| #elif defined(__sparc__) |
| print_insn = print_insn_sparc; |
| #if defined(__sparc_v8plus__) || defined(__sparc_v8plusa__) || defined(__sparc_v9__) |
| disasm_info.mach = bfd_mach_sparc_v9b; |
| #endif |
| #elif defined(__arm__) |
| print_insn = print_insn_arm; |
| #elif defined(__MIPSEB__) |
| print_insn = print_insn_big_mips; |
| #elif defined(__MIPSEL__) |
| print_insn = print_insn_little_mips; |
| #elif defined(__m68k__) |
| print_insn = print_insn_m68k; |
| #elif defined(__s390__) |
| print_insn = print_insn_s390; |
| #elif defined(__hppa__) |
| print_insn = print_insn_hppa; |
| #elif defined(__ia64__) |
| print_insn = print_insn_ia64; |
| #else |
| fprintf(out, "0x%lx: Asm output not supported on this arch\n", |
| (long) code); |
| return; |
| #endif |
| for (pc = (unsigned long)code; size > 0; pc += count, size -= count) { |
| fprintf(out, "0x%08lx: ", pc); |
| count = print_insn(pc, &disasm_info); |
| fprintf(out, "\n"); |
| if (count < 0) |
| break; |
| } |
| } |
| |
| /* Look up symbol for debugging purpose. Returns "" if unknown. */ |
| const char *lookup_symbol(target_ulong orig_addr) |
| { |
| const char *symbol = ""; |
| struct syminfo *s; |
| |
| for (s = syminfos; s; s = s->next) { |
| symbol = s->lookup_symbol(s, orig_addr); |
| if (symbol[0] != '\0') { |
| break; |
| } |
| } |
| |
| return symbol; |
| } |
| |
| #if !defined(CONFIG_USER_ONLY) |
| |
| #include "monitor.h" |
| |
| static int monitor_disas_is_physical; |
| static CPUState *monitor_disas_env; |
| |
| static int |
| monitor_read_memory (bfd_vma memaddr, bfd_byte *myaddr, int length, |
| struct disassemble_info *info) |
| { |
| if (monitor_disas_is_physical) { |
| cpu_physical_memory_rw(memaddr, myaddr, length, 0); |
| } else { |
| cpu_memory_rw_debug(monitor_disas_env, memaddr,myaddr, length, 0); |
| } |
| return 0; |
| } |
| |
| static int GCC_FMT_ATTR(2, 3) |
| monitor_fprintf(FILE *stream, const char *fmt, ...) |
| { |
| va_list ap; |
| va_start(ap, fmt); |
| monitor_vprintf((Monitor *)stream, fmt, ap); |
| va_end(ap); |
| return 0; |
| } |
| |
| void monitor_disas(Monitor *mon, CPUState *env, |
| target_ulong pc, int nb_insn, int is_physical, int flags) |
| { |
| int count, i; |
| struct disassemble_info disasm_info; |
| int (*print_insn)(bfd_vma pc, disassemble_info *info); |
| |
| INIT_DISASSEMBLE_INFO(disasm_info, (FILE *)mon, monitor_fprintf); |
| |
| monitor_disas_env = env; |
| monitor_disas_is_physical = is_physical; |
| disasm_info.read_memory_func = monitor_read_memory; |
| |
| disasm_info.buffer_vma = pc; |
| |
| #ifdef TARGET_WORDS_BIGENDIAN |
| disasm_info.endian = BFD_ENDIAN_BIG; |
| #else |
| disasm_info.endian = BFD_ENDIAN_LITTLE; |
| #endif |
| #if defined(TARGET_I386) |
| if (flags == 2) |
| disasm_info.mach = bfd_mach_x86_64; |
| else if (flags == 1) |
| disasm_info.mach = bfd_mach_i386_i8086; |
| else |
| disasm_info.mach = bfd_mach_i386_i386; |
| print_insn = print_insn_i386; |
| #elif defined(TARGET_ARM) |
| print_insn = print_insn_arm; |
| #elif defined(TARGET_ALPHA) |
| print_insn = print_insn_alpha; |
| #elif defined(TARGET_SPARC) |
| print_insn = print_insn_sparc; |
| #ifdef TARGET_SPARC64 |
| disasm_info.mach = bfd_mach_sparc_v9b; |
| #endif |
| #elif defined(TARGET_PPC) |
| #ifdef TARGET_PPC64 |
| disasm_info.mach = bfd_mach_ppc64; |
| #else |
| disasm_info.mach = bfd_mach_ppc; |
| #endif |
| print_insn = print_insn_ppc; |
| #elif defined(TARGET_M68K) |
| print_insn = print_insn_m68k; |
| #elif defined(TARGET_MIPS) |
| #ifdef TARGET_WORDS_BIGENDIAN |
| print_insn = print_insn_big_mips; |
| #else |
| print_insn = print_insn_little_mips; |
| #endif |
| #elif defined(TARGET_SH4) |
| disasm_info.mach = bfd_mach_sh4; |
| print_insn = print_insn_sh; |
| #else |
| monitor_printf(mon, "0x" TARGET_FMT_lx |
| ": Asm output not supported on this arch\n", pc); |
| return; |
| #endif |
| |
| for(i = 0; i < nb_insn; i++) { |
| monitor_printf(mon, "0x" TARGET_FMT_lx ": ", pc); |
| count = print_insn(pc, &disasm_info); |
| monitor_printf(mon, "\n"); |
| if (count < 0) |
| break; |
| pc += count; |
| } |
| } |
| #endif |
