| /* |
| * ARM GIC support |
| * |
| * Copyright (c) 2012 Linaro Limited |
| * Written by Peter Maydell |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation, either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #ifndef HW_ARM_GIC_COMMON_H |
| #define HW_ARM_GIC_COMMON_H |
| |
| #include "hw/sysbus.h" |
| #include "qom/object.h" |
| |
| /* Maximum number of possible interrupts, determined by the GIC architecture */ |
| #define GIC_MAXIRQ 1020 |
| /* First 32 are private to each CPU (SGIs and PPIs). */ |
| #define GIC_INTERNAL 32 |
| #define GIC_NR_SGIS 16 |
| /* Maximum number of possible CPU interfaces, determined by GIC architecture */ |
| #define GIC_NCPU 8 |
| /* Maximum number of possible CPU interfaces with their respective vCPU */ |
| #define GIC_NCPU_VCPU (GIC_NCPU * 2) |
| |
| #define MAX_NR_GROUP_PRIO 128 |
| #define GIC_NR_APRS (MAX_NR_GROUP_PRIO / 32) |
| |
| #define GIC_MIN_BPR 0 |
| #define GIC_MIN_ABPR (GIC_MIN_BPR + 1) |
| |
| /* Architectural maximum number of list registers in the virtual interface */ |
| #define GIC_MAX_LR 64 |
| |
| /* Only 32 priority levels and 32 preemption levels in the vCPU interfaces */ |
| #define GIC_VIRT_MAX_GROUP_PRIO_BITS 5 |
| #define GIC_VIRT_MAX_NR_GROUP_PRIO (1 << GIC_VIRT_MAX_GROUP_PRIO_BITS) |
| #define GIC_VIRT_NR_APRS (GIC_VIRT_MAX_NR_GROUP_PRIO / 32) |
| |
| #define GIC_VIRT_MIN_BPR 2 |
| #define GIC_VIRT_MIN_ABPR (GIC_VIRT_MIN_BPR + 1) |
| |
| typedef struct gic_irq_state { |
| /* The enable bits are only banked for per-cpu interrupts. */ |
| uint8_t enabled; |
| uint8_t pending; |
| uint8_t active; |
| uint8_t level; |
| bool model; /* 0 = N:N, 1 = 1:N */ |
| bool edge_trigger; /* true: edge-triggered, false: level-triggered */ |
| uint8_t group; |
| } gic_irq_state; |
| |
| struct GICState { |
| /*< private >*/ |
| SysBusDevice parent_obj; |
| /*< public >*/ |
| |
| qemu_irq parent_irq[GIC_NCPU]; |
| qemu_irq parent_fiq[GIC_NCPU]; |
| qemu_irq parent_virq[GIC_NCPU]; |
| qemu_irq parent_vfiq[GIC_NCPU]; |
| qemu_irq maintenance_irq[GIC_NCPU]; |
| |
| /* GICD_CTLR; for a GIC with the security extensions the NS banked version |
| * of this register is just an alias of bit 1 of the S banked version. |
| */ |
| uint32_t ctlr; |
| /* GICC_CTLR; again, the NS banked version is just aliases of bits of |
| * the S banked register, so our state only needs to store the S version. |
| */ |
| uint32_t cpu_ctlr[GIC_NCPU_VCPU]; |
| |
| gic_irq_state irq_state[GIC_MAXIRQ]; |
| uint8_t irq_target[GIC_MAXIRQ]; |
| uint8_t priority1[GIC_INTERNAL][GIC_NCPU]; |
| uint8_t priority2[GIC_MAXIRQ - GIC_INTERNAL]; |
| /* For each SGI on the target CPU, we store 8 bits |
| * indicating which source CPUs have made this SGI |
| * pending on the target CPU. These correspond to |
| * the bytes in the GIC_SPENDSGIR* registers as |
| * read by the target CPU. |
| */ |
| uint8_t sgi_pending[GIC_NR_SGIS][GIC_NCPU]; |
| |
| uint16_t priority_mask[GIC_NCPU_VCPU]; |
| uint16_t running_priority[GIC_NCPU_VCPU]; |
| uint16_t current_pending[GIC_NCPU_VCPU]; |
| uint32_t n_prio_bits; |
| |
| /* If we present the GICv2 without security extensions to a guest, |
| * the guest can configure the GICC_CTLR to configure group 1 binary point |
| * in the abpr. |
| * For a GIC with Security Extensions we use use bpr for the |
| * secure copy and abpr as storage for the non-secure copy of the register. |
| */ |
| uint8_t bpr[GIC_NCPU_VCPU]; |
| uint8_t abpr[GIC_NCPU_VCPU]; |
| |
| /* The APR is implementation defined, so we choose a layout identical to |
| * the KVM ABI layout for QEMU's implementation of the gic: |
| * If an interrupt for preemption level X is active, then |
| * APRn[X mod 32] == 0b1, where n = X / 32 |
| * otherwise the bit is clear. |
| */ |
| uint32_t apr[GIC_NR_APRS][GIC_NCPU]; |
| uint32_t nsapr[GIC_NR_APRS][GIC_NCPU]; |
| |
| /* Virtual interface control registers */ |
| uint32_t h_hcr[GIC_NCPU]; |
| uint32_t h_misr[GIC_NCPU]; |
| uint32_t h_lr[GIC_MAX_LR][GIC_NCPU]; |
| uint32_t h_apr[GIC_NCPU]; |
| |
| /* Number of LRs implemented in this GIC instance */ |
| uint32_t num_lrs; |
| |
| uint32_t num_cpu; |
| |
| MemoryRegion iomem; /* Distributor */ |
| /* This is just so we can have an opaque pointer which identifies |
| * both this GIC and which CPU interface we should be accessing. |
| */ |
| struct GICState *backref[GIC_NCPU]; |
| MemoryRegion cpuiomem[GIC_NCPU + 1]; /* CPU interfaces */ |
| MemoryRegion vifaceiomem[GIC_NCPU + 1]; /* Virtual interfaces */ |
| MemoryRegion vcpuiomem; /* vCPU interface */ |
| |
| uint32_t num_irq; |
| uint32_t revision; |
| bool security_extn; |
| bool virt_extn; |
| bool irq_reset_nonsecure; /* configure IRQs as group 1 (NS) on reset? */ |
| int dev_fd; /* kvm device fd if backed by kvm vgic support */ |
| Error *migration_blocker; |
| }; |
| typedef struct GICState GICState; |
| |
| #define TYPE_ARM_GIC_COMMON "arm_gic_common" |
| typedef struct ARMGICCommonClass ARMGICCommonClass; |
| DECLARE_OBJ_CHECKERS(GICState, ARMGICCommonClass, |
| ARM_GIC_COMMON, TYPE_ARM_GIC_COMMON) |
| |
| struct ARMGICCommonClass { |
| /*< private >*/ |
| SysBusDeviceClass parent_class; |
| /*< public >*/ |
| |
| void (*pre_save)(GICState *s); |
| void (*post_load)(GICState *s); |
| }; |
| |
| void gic_init_irqs_and_mmio(GICState *s, qemu_irq_handler handler, |
| const MemoryRegionOps *ops, |
| const MemoryRegionOps *virt_ops); |
| |
| #endif |