| /* |
| * QEMU low level functions |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "qemu/osdep.h" |
| |
| /* Needed early for CONFIG_BSD etc. */ |
| |
| #ifdef CONFIG_SOLARIS |
| #include <sys/statvfs.h> |
| /* See MySQL bug #7156 (http://bugs.mysql.com/bug.php?id=7156) for |
| discussion about Solaris header problems */ |
| extern int madvise(caddr_t, size_t, int); |
| #endif |
| |
| #include "qemu-common.h" |
| #include "qemu/cutils.h" |
| #include "qemu/sockets.h" |
| #include "qemu/error-report.h" |
| #include "monitor/monitor.h" |
| |
| #ifdef F_OFD_SETLK |
| #define QEMU_SETLK F_OFD_SETLK |
| #define QEMU_GETLK F_OFD_GETLK |
| #else |
| #define QEMU_SETLK F_SETLK |
| #define QEMU_GETLK F_GETLK |
| #endif |
| |
| static bool fips_enabled = false; |
| |
| static const char *hw_version = QEMU_HW_VERSION; |
| |
| int socket_set_cork(int fd, int v) |
| { |
| #if defined(SOL_TCP) && defined(TCP_CORK) |
| return qemu_setsockopt(fd, SOL_TCP, TCP_CORK, &v, sizeof(v)); |
| #else |
| return 0; |
| #endif |
| } |
| |
| int socket_set_nodelay(int fd) |
| { |
| int v = 1; |
| return qemu_setsockopt(fd, IPPROTO_TCP, TCP_NODELAY, &v, sizeof(v)); |
| } |
| |
| int qemu_madvise(void *addr, size_t len, int advice) |
| { |
| if (advice == QEMU_MADV_INVALID) { |
| errno = EINVAL; |
| return -1; |
| } |
| #if defined(CONFIG_MADVISE) |
| return madvise(addr, len, advice); |
| #elif defined(CONFIG_POSIX_MADVISE) |
| return posix_madvise(addr, len, advice); |
| #else |
| errno = EINVAL; |
| return -1; |
| #endif |
| } |
| |
| #ifndef _WIN32 |
| /* |
| * Dups an fd and sets the flags |
| */ |
| static int qemu_dup_flags(int fd, int flags) |
| { |
| int ret; |
| int serrno; |
| int dup_flags; |
| |
| ret = qemu_dup(fd); |
| if (ret == -1) { |
| goto fail; |
| } |
| |
| dup_flags = fcntl(ret, F_GETFL); |
| if (dup_flags == -1) { |
| goto fail; |
| } |
| |
| if ((flags & O_SYNC) != (dup_flags & O_SYNC)) { |
| errno = EINVAL; |
| goto fail; |
| } |
| |
| /* Set/unset flags that we can with fcntl */ |
| if (fcntl(ret, F_SETFL, flags) == -1) { |
| goto fail; |
| } |
| |
| /* Truncate the file in the cases that open() would truncate it */ |
| if (flags & O_TRUNC || |
| ((flags & (O_CREAT | O_EXCL)) == (O_CREAT | O_EXCL))) { |
| if (ftruncate(ret, 0) == -1) { |
| goto fail; |
| } |
| } |
| |
| return ret; |
| |
| fail: |
| serrno = errno; |
| if (ret != -1) { |
| close(ret); |
| } |
| errno = serrno; |
| return -1; |
| } |
| |
| int qemu_dup(int fd) |
| { |
| int ret; |
| #ifdef F_DUPFD_CLOEXEC |
| ret = fcntl(fd, F_DUPFD_CLOEXEC, 0); |
| #else |
| ret = dup(fd); |
| if (ret != -1) { |
| qemu_set_cloexec(ret); |
| } |
| #endif |
| return ret; |
| } |
| |
| static int qemu_parse_fdset(const char *param) |
| { |
| return qemu_parse_fd(param); |
| } |
| |
| static int qemu_lock_fcntl(int fd, int64_t start, int64_t len, int fl_type) |
| { |
| int ret; |
| struct flock fl = { |
| .l_whence = SEEK_SET, |
| .l_start = start, |
| .l_len = len, |
| .l_type = fl_type, |
| }; |
| ret = fcntl(fd, QEMU_SETLK, &fl); |
| return ret == -1 ? -errno : 0; |
| } |
| |
| int qemu_lock_fd(int fd, int64_t start, int64_t len, bool exclusive) |
| { |
| return qemu_lock_fcntl(fd, start, len, exclusive ? F_WRLCK : F_RDLCK); |
| } |
| |
| int qemu_unlock_fd(int fd, int64_t start, int64_t len) |
| { |
| return qemu_lock_fcntl(fd, start, len, F_UNLCK); |
| } |
| |
| int qemu_lock_fd_test(int fd, int64_t start, int64_t len, bool exclusive) |
| { |
| int ret; |
| struct flock fl = { |
| .l_whence = SEEK_SET, |
| .l_start = start, |
| .l_len = len, |
| .l_type = exclusive ? F_WRLCK : F_RDLCK, |
| }; |
| ret = fcntl(fd, QEMU_GETLK, &fl); |
| if (ret == -1) { |
| return -errno; |
| } else { |
| return fl.l_type == F_UNLCK ? 0 : -EAGAIN; |
| } |
| } |
| #endif |
| |
| /* |
| * Opens a file with FD_CLOEXEC set |
| */ |
| int qemu_open(const char *name, int flags, ...) |
| { |
| int ret; |
| int mode = 0; |
| |
| #ifndef _WIN32 |
| const char *fdset_id_str; |
| |
| /* Attempt dup of fd from fd set */ |
| if (strstart(name, "/dev/fdset/", &fdset_id_str)) { |
| int64_t fdset_id; |
| int fd, dupfd; |
| |
| fdset_id = qemu_parse_fdset(fdset_id_str); |
| if (fdset_id == -1) { |
| errno = EINVAL; |
| return -1; |
| } |
| |
| fd = monitor_fdset_get_fd(fdset_id, flags); |
| if (fd == -1) { |
| return -1; |
| } |
| |
| dupfd = qemu_dup_flags(fd, flags); |
| if (dupfd == -1) { |
| return -1; |
| } |
| |
| ret = monitor_fdset_dup_fd_add(fdset_id, dupfd); |
| if (ret == -1) { |
| close(dupfd); |
| errno = EINVAL; |
| return -1; |
| } |
| |
| return dupfd; |
| } |
| #endif |
| |
| if (flags & O_CREAT) { |
| va_list ap; |
| |
| va_start(ap, flags); |
| mode = va_arg(ap, int); |
| va_end(ap); |
| } |
| |
| #ifdef O_CLOEXEC |
| ret = open(name, flags | O_CLOEXEC, mode); |
| #else |
| ret = open(name, flags, mode); |
| if (ret >= 0) { |
| qemu_set_cloexec(ret); |
| } |
| #endif |
| |
| #ifdef O_DIRECT |
| if (ret == -1 && errno == EINVAL && (flags & O_DIRECT)) { |
| error_report("file system may not support O_DIRECT"); |
| errno = EINVAL; /* in case it was clobbered */ |
| } |
| #endif /* O_DIRECT */ |
| |
| return ret; |
| } |
| |
| int qemu_close(int fd) |
| { |
| int64_t fdset_id; |
| |
| /* Close fd that was dup'd from an fdset */ |
| fdset_id = monitor_fdset_dup_fd_find(fd); |
| if (fdset_id != -1) { |
| int ret; |
| |
| ret = close(fd); |
| if (ret == 0) { |
| monitor_fdset_dup_fd_remove(fd); |
| } |
| |
| return ret; |
| } |
| |
| return close(fd); |
| } |
| |
| /* |
| * A variant of write(2) which handles partial write. |
| * |
| * Return the number of bytes transferred. |
| * Set errno if fewer than `count' bytes are written. |
| * |
| * This function don't work with non-blocking fd's. |
| * Any of the possibilities with non-bloking fd's is bad: |
| * - return a short write (then name is wrong) |
| * - busy wait adding (errno == EAGAIN) to the loop |
| */ |
| ssize_t qemu_write_full(int fd, const void *buf, size_t count) |
| { |
| ssize_t ret = 0; |
| ssize_t total = 0; |
| |
| while (count) { |
| ret = write(fd, buf, count); |
| if (ret < 0) { |
| if (errno == EINTR) |
| continue; |
| break; |
| } |
| |
| count -= ret; |
| buf += ret; |
| total += ret; |
| } |
| |
| return total; |
| } |
| |
| /* |
| * Opens a socket with FD_CLOEXEC set |
| */ |
| int qemu_socket(int domain, int type, int protocol) |
| { |
| int ret; |
| |
| #ifdef SOCK_CLOEXEC |
| ret = socket(domain, type | SOCK_CLOEXEC, protocol); |
| if (ret != -1 || errno != EINVAL) { |
| return ret; |
| } |
| #endif |
| ret = socket(domain, type, protocol); |
| if (ret >= 0) { |
| qemu_set_cloexec(ret); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Accept a connection and set FD_CLOEXEC |
| */ |
| int qemu_accept(int s, struct sockaddr *addr, socklen_t *addrlen) |
| { |
| int ret; |
| |
| #ifdef CONFIG_ACCEPT4 |
| ret = accept4(s, addr, addrlen, SOCK_CLOEXEC); |
| if (ret != -1 || errno != ENOSYS) { |
| return ret; |
| } |
| #endif |
| ret = accept(s, addr, addrlen); |
| if (ret >= 0) { |
| qemu_set_cloexec(ret); |
| } |
| |
| return ret; |
| } |
| |
| void qemu_set_hw_version(const char *version) |
| { |
| hw_version = version; |
| } |
| |
| const char *qemu_hw_version(void) |
| { |
| return hw_version; |
| } |
| |
| void fips_set_state(bool requested) |
| { |
| #ifdef __linux__ |
| if (requested) { |
| FILE *fds = fopen("/proc/sys/crypto/fips_enabled", "r"); |
| if (fds != NULL) { |
| fips_enabled = (fgetc(fds) == '1'); |
| fclose(fds); |
| } |
| } |
| #else |
| fips_enabled = false; |
| #endif /* __linux__ */ |
| |
| #ifdef _FIPS_DEBUG |
| fprintf(stderr, "FIPS mode %s (requested %s)\n", |
| (fips_enabled ? "enabled" : "disabled"), |
| (requested ? "enabled" : "disabled")); |
| #endif |
| } |
| |
| bool fips_get_state(void) |
| { |
| return fips_enabled; |
| } |
| |
| #ifdef _WIN32 |
| static void socket_cleanup(void) |
| { |
| WSACleanup(); |
| } |
| #endif |
| |
| int socket_init(void) |
| { |
| #ifdef _WIN32 |
| WSADATA Data; |
| int ret, err; |
| |
| ret = WSAStartup(MAKEWORD(2, 2), &Data); |
| if (ret != 0) { |
| err = WSAGetLastError(); |
| fprintf(stderr, "WSAStartup: %d\n", err); |
| return -1; |
| } |
| atexit(socket_cleanup); |
| #endif |
| return 0; |
| } |
| |
| #if !GLIB_CHECK_VERSION(2, 31, 0) |
| /* Ensure that glib is running in multi-threaded mode |
| * Old versions of glib require explicit initialization. Failure to do |
| * this results in the single-threaded code paths being taken inside |
| * glib. For example, the g_slice allocator will not be thread-safe |
| * and cause crashes. |
| */ |
| static void __attribute__((constructor)) thread_init(void) |
| { |
| if (!g_thread_supported()) { |
| g_thread_init(NULL); |
| } |
| } |
| #endif |
| |
| #ifndef CONFIG_IOVEC |
| /* helper function for iov_send_recv() */ |
| static ssize_t |
| readv_writev(int fd, const struct iovec *iov, int iov_cnt, bool do_write) |
| { |
| unsigned i = 0; |
| ssize_t ret = 0; |
| while (i < iov_cnt) { |
| ssize_t r = do_write |
| ? write(fd, iov[i].iov_base, iov[i].iov_len) |
| : read(fd, iov[i].iov_base, iov[i].iov_len); |
| if (r > 0) { |
| ret += r; |
| } else if (!r) { |
| break; |
| } else if (errno == EINTR) { |
| continue; |
| } else { |
| /* else it is some "other" error, |
| * only return if there was no data processed. */ |
| if (ret == 0) { |
| ret = -1; |
| } |
| break; |
| } |
| i++; |
| } |
| return ret; |
| } |
| |
| ssize_t |
| readv(int fd, const struct iovec *iov, int iov_cnt) |
| { |
| return readv_writev(fd, iov, iov_cnt, false); |
| } |
| |
| ssize_t |
| writev(int fd, const struct iovec *iov, int iov_cnt) |
| { |
| return readv_writev(fd, iov, iov_cnt, true); |
| } |
| #endif |