blob: d03f57e579b35ae80da011c49b428759de4268ef [file] [log] [blame]
/*
* Cortex-A9MPCore internal peripheral emulation.
*
* Copyright (c) 2009 CodeSourcery.
* Copyright (c) 2011 Linaro Limited.
* Written by Paul Brook, Peter Maydell.
*
* This code is licensed under the GPL.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu/module.h"
#include "hw/cpu/a9mpcore.h"
#include "hw/irq.h"
#include "hw/qdev-properties.h"
#include "hw/core/cpu.h"
#include "cpu.h"
#define A9_GIC_NUM_PRIORITY_BITS 5
static void a9mp_priv_set_irq(void *opaque, int irq, int level)
{
A9MPPrivState *s = (A9MPPrivState *)opaque;
qemu_set_irq(qdev_get_gpio_in(DEVICE(&s->gic), irq), level);
}
static void a9mp_priv_initfn(Object *obj)
{
A9MPPrivState *s = A9MPCORE_PRIV(obj);
memory_region_init(&s->container, obj, "a9mp-priv-container", 0x2000);
sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->container);
object_initialize_child(obj, "scu", &s->scu, TYPE_A9_SCU);
object_initialize_child(obj, "gic", &s->gic, TYPE_ARM_GIC);
object_initialize_child(obj, "gtimer", &s->gtimer, TYPE_A9_GTIMER);
object_initialize_child(obj, "mptimer", &s->mptimer, TYPE_ARM_MPTIMER);
object_initialize_child(obj, "wdt", &s->wdt, TYPE_ARM_MPTIMER);
}
static void a9mp_priv_realize(DeviceState *dev, Error **errp)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
A9MPPrivState *s = A9MPCORE_PRIV(dev);
DeviceState *scudev, *gicdev, *gtimerdev, *mptimerdev, *wdtdev;
SysBusDevice *scubusdev, *gicbusdev, *gtimerbusdev, *mptimerbusdev,
*wdtbusdev;
int i;
bool has_el3;
CPUState *cpu0;
Object *cpuobj;
cpu0 = qemu_get_cpu(0);
cpuobj = OBJECT(cpu0);
if (strcmp(object_get_typename(cpuobj), ARM_CPU_TYPE_NAME("cortex-a9"))) {
/* We might allow Cortex-A5 once we model it */
error_setg(errp,
"Cortex-A9MPCore peripheral can only use Cortex-A9 CPU");
return;
}
scudev = DEVICE(&s->scu);
qdev_prop_set_uint32(scudev, "num-cpu", s->num_cpu);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->scu), errp)) {
return;
}
scubusdev = SYS_BUS_DEVICE(&s->scu);
gicdev = DEVICE(&s->gic);
qdev_prop_set_uint32(gicdev, "num-cpu", s->num_cpu);
qdev_prop_set_uint32(gicdev, "num-irq", s->num_irq);
qdev_prop_set_uint32(gicdev, "num-priority-bits",
A9_GIC_NUM_PRIORITY_BITS);
/* Make the GIC's TZ support match the CPUs. We assume that
* either all the CPUs have TZ, or none do.
*/
has_el3 = object_property_find(cpuobj, "has_el3") &&
object_property_get_bool(cpuobj, "has_el3", &error_abort);
qdev_prop_set_bit(gicdev, "has-security-extensions", has_el3);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->gic), errp)) {
return;
}
gicbusdev = SYS_BUS_DEVICE(&s->gic);
/* Pass through outbound IRQ lines from the GIC */
sysbus_pass_irq(sbd, gicbusdev);
/* Pass through inbound GPIO lines to the GIC */
qdev_init_gpio_in(dev, a9mp_priv_set_irq, s->num_irq - 32);
gtimerdev = DEVICE(&s->gtimer);
qdev_prop_set_uint32(gtimerdev, "num-cpu", s->num_cpu);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->gtimer), errp)) {
return;
}
gtimerbusdev = SYS_BUS_DEVICE(&s->gtimer);
mptimerdev = DEVICE(&s->mptimer);
qdev_prop_set_uint32(mptimerdev, "num-cpu", s->num_cpu);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->mptimer), errp)) {
return;
}
mptimerbusdev = SYS_BUS_DEVICE(&s->mptimer);
wdtdev = DEVICE(&s->wdt);
qdev_prop_set_uint32(wdtdev, "num-cpu", s->num_cpu);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->wdt), errp)) {
return;
}
wdtbusdev = SYS_BUS_DEVICE(&s->wdt);
/* Memory map (addresses are offsets from PERIPHBASE):
* 0x0000-0x00ff -- Snoop Control Unit
* 0x0100-0x01ff -- GIC CPU interface
* 0x0200-0x02ff -- Global Timer
* 0x0300-0x05ff -- nothing
* 0x0600-0x06ff -- private timers and watchdogs
* 0x0700-0x0fff -- nothing
* 0x1000-0x1fff -- GIC Distributor
*/
memory_region_add_subregion(&s->container, 0,
sysbus_mmio_get_region(scubusdev, 0));
/* GIC CPU interface */
memory_region_add_subregion(&s->container, 0x100,
sysbus_mmio_get_region(gicbusdev, 1));
memory_region_add_subregion(&s->container, 0x200,
sysbus_mmio_get_region(gtimerbusdev, 0));
/* Note that the A9 exposes only the "timer/watchdog for this core"
* memory region, not the "timer/watchdog for core X" ones 11MPcore has.
*/
memory_region_add_subregion(&s->container, 0x600,
sysbus_mmio_get_region(mptimerbusdev, 0));
memory_region_add_subregion(&s->container, 0x620,
sysbus_mmio_get_region(wdtbusdev, 0));
memory_region_add_subregion(&s->container, 0x1000,
sysbus_mmio_get_region(gicbusdev, 0));
/* Wire up the interrupt from each watchdog and timer.
* For each core the global timer is PPI 27, the private
* timer is PPI 29 and the watchdog PPI 30.
*/
for (i = 0; i < s->num_cpu; i++) {
int ppibase = (s->num_irq - 32) + i * 32;
sysbus_connect_irq(gtimerbusdev, i,
qdev_get_gpio_in(gicdev, ppibase + 27));
sysbus_connect_irq(mptimerbusdev, i,
qdev_get_gpio_in(gicdev, ppibase + 29));
sysbus_connect_irq(wdtbusdev, i,
qdev_get_gpio_in(gicdev, ppibase + 30));
}
}
static Property a9mp_priv_properties[] = {
DEFINE_PROP_UINT32("num-cpu", A9MPPrivState, num_cpu, 1),
/* The Cortex-A9MP may have anything from 0 to 224 external interrupt
* IRQ lines (with another 32 internal). We default to 64+32, which
* is the number provided by the Cortex-A9MP test chip in the
* Realview PBX-A9 and Versatile Express A9 development boards.
* Other boards may differ and should set this property appropriately.
*/
DEFINE_PROP_UINT32("num-irq", A9MPPrivState, num_irq, 96),
DEFINE_PROP_END_OF_LIST(),
};
static void a9mp_priv_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = a9mp_priv_realize;
device_class_set_props(dc, a9mp_priv_properties);
}
static const TypeInfo a9mp_priv_info = {
.name = TYPE_A9MPCORE_PRIV,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(A9MPPrivState),
.instance_init = a9mp_priv_initfn,
.class_init = a9mp_priv_class_init,
};
static void a9mp_register_types(void)
{
type_register_static(&a9mp_priv_info);
}
type_init(a9mp_register_types)