| /* |
| * QEMU Sparc SLAVIO interrupt controller emulation |
| * |
| * Copyright (c) 2003-2005 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "sun4m.h" |
| #include "monitor.h" |
| #include "sysbus.h" |
| |
| //#define DEBUG_IRQ_COUNT |
| //#define DEBUG_IRQ |
| |
| #ifdef DEBUG_IRQ |
| #define DPRINTF(fmt, ...) \ |
| do { printf("IRQ: " fmt , ## __VA_ARGS__); } while (0) |
| #else |
| #define DPRINTF(fmt, ...) |
| #endif |
| |
| /* |
| * Registers of interrupt controller in sun4m. |
| * |
| * This is the interrupt controller part of chip STP2001 (Slave I/O), also |
| * produced as NCR89C105. See |
| * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C105.txt |
| * |
| * There is a system master controller and one for each cpu. |
| * |
| */ |
| |
| #define MAX_CPUS 16 |
| #define MAX_PILS 16 |
| |
| struct SLAVIO_INTCTLState; |
| |
| typedef struct SLAVIO_CPUINTCTLState { |
| uint32_t intreg_pending; |
| struct SLAVIO_INTCTLState *master; |
| uint32_t cpu; |
| uint32_t irl_out; |
| } SLAVIO_CPUINTCTLState; |
| |
| typedef struct SLAVIO_INTCTLState { |
| SysBusDevice busdev; |
| uint32_t intregm_pending; |
| uint32_t intregm_disabled; |
| uint32_t target_cpu; |
| #ifdef DEBUG_IRQ_COUNT |
| uint64_t irq_count[32]; |
| #endif |
| qemu_irq cpu_irqs[MAX_CPUS][MAX_PILS]; |
| SLAVIO_CPUINTCTLState slaves[MAX_CPUS]; |
| } SLAVIO_INTCTLState; |
| |
| #define INTCTL_MAXADDR 0xf |
| #define INTCTL_SIZE (INTCTL_MAXADDR + 1) |
| #define INTCTLM_SIZE 0x14 |
| #define MASTER_IRQ_MASK ~0x0fa2007f |
| #define MASTER_DISABLE 0x80000000 |
| #define CPU_SOFTIRQ_MASK 0xfffe0000 |
| #define CPU_IRQ_INT15_IN (1 << 15) |
| #define CPU_IRQ_TIMER_IN (1 << 14) |
| |
| static void slavio_check_interrupts(SLAVIO_INTCTLState *s, int set_irqs); |
| |
| // per-cpu interrupt controller |
| static uint32_t slavio_intctl_mem_readl(void *opaque, target_phys_addr_t addr) |
| { |
| SLAVIO_CPUINTCTLState *s = opaque; |
| uint32_t saddr, ret; |
| |
| saddr = addr >> 2; |
| switch (saddr) { |
| case 0: |
| ret = s->intreg_pending; |
| break; |
| default: |
| ret = 0; |
| break; |
| } |
| DPRINTF("read cpu %d reg 0x" TARGET_FMT_plx " = %x\n", s->cpu, addr, ret); |
| |
| return ret; |
| } |
| |
| static void slavio_intctl_mem_writel(void *opaque, target_phys_addr_t addr, |
| uint32_t val) |
| { |
| SLAVIO_CPUINTCTLState *s = opaque; |
| uint32_t saddr; |
| |
| saddr = addr >> 2; |
| DPRINTF("write cpu %d reg 0x" TARGET_FMT_plx " = %x\n", s->cpu, addr, val); |
| switch (saddr) { |
| case 1: // clear pending softints |
| val &= CPU_SOFTIRQ_MASK | CPU_IRQ_INT15_IN; |
| s->intreg_pending &= ~val; |
| slavio_check_interrupts(s->master, 1); |
| DPRINTF("Cleared cpu %d irq mask %x, curmask %x\n", s->cpu, val, |
| s->intreg_pending); |
| break; |
| case 2: // set softint |
| val &= CPU_SOFTIRQ_MASK; |
| s->intreg_pending |= val; |
| slavio_check_interrupts(s->master, 1); |
| DPRINTF("Set cpu %d irq mask %x, curmask %x\n", s->cpu, val, |
| s->intreg_pending); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static CPUReadMemoryFunc * const slavio_intctl_mem_read[3] = { |
| NULL, |
| NULL, |
| slavio_intctl_mem_readl, |
| }; |
| |
| static CPUWriteMemoryFunc * const slavio_intctl_mem_write[3] = { |
| NULL, |
| NULL, |
| slavio_intctl_mem_writel, |
| }; |
| |
| // master system interrupt controller |
| static uint32_t slavio_intctlm_mem_readl(void *opaque, target_phys_addr_t addr) |
| { |
| SLAVIO_INTCTLState *s = opaque; |
| uint32_t saddr, ret; |
| |
| saddr = addr >> 2; |
| switch (saddr) { |
| case 0: |
| ret = s->intregm_pending & ~MASTER_DISABLE; |
| break; |
| case 1: |
| ret = s->intregm_disabled & MASTER_IRQ_MASK; |
| break; |
| case 4: |
| ret = s->target_cpu; |
| break; |
| default: |
| ret = 0; |
| break; |
| } |
| DPRINTF("read system reg 0x" TARGET_FMT_plx " = %x\n", addr, ret); |
| |
| return ret; |
| } |
| |
| static void slavio_intctlm_mem_writel(void *opaque, target_phys_addr_t addr, |
| uint32_t val) |
| { |
| SLAVIO_INTCTLState *s = opaque; |
| uint32_t saddr; |
| |
| saddr = addr >> 2; |
| DPRINTF("write system reg 0x" TARGET_FMT_plx " = %x\n", addr, val); |
| switch (saddr) { |
| case 2: // clear (enable) |
| // Force clear unused bits |
| val &= MASTER_IRQ_MASK; |
| s->intregm_disabled &= ~val; |
| DPRINTF("Enabled master irq mask %x, curmask %x\n", val, |
| s->intregm_disabled); |
| slavio_check_interrupts(s, 1); |
| break; |
| case 3: // set (disable, clear pending) |
| // Force clear unused bits |
| val &= MASTER_IRQ_MASK; |
| s->intregm_disabled |= val; |
| s->intregm_pending &= ~val; |
| slavio_check_interrupts(s, 1); |
| DPRINTF("Disabled master irq mask %x, curmask %x\n", val, |
| s->intregm_disabled); |
| break; |
| case 4: |
| s->target_cpu = val & (MAX_CPUS - 1); |
| slavio_check_interrupts(s, 1); |
| DPRINTF("Set master irq cpu %d\n", s->target_cpu); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static CPUReadMemoryFunc * const slavio_intctlm_mem_read[3] = { |
| NULL, |
| NULL, |
| slavio_intctlm_mem_readl, |
| }; |
| |
| static CPUWriteMemoryFunc * const slavio_intctlm_mem_write[3] = { |
| NULL, |
| NULL, |
| slavio_intctlm_mem_writel, |
| }; |
| |
| void slavio_pic_info(Monitor *mon, DeviceState *dev) |
| { |
| SysBusDevice *sd; |
| SLAVIO_INTCTLState *s; |
| int i; |
| |
| sd = sysbus_from_qdev(dev); |
| s = FROM_SYSBUS(SLAVIO_INTCTLState, sd); |
| for (i = 0; i < MAX_CPUS; i++) { |
| monitor_printf(mon, "per-cpu %d: pending 0x%08x\n", i, |
| s->slaves[i].intreg_pending); |
| } |
| monitor_printf(mon, "master: pending 0x%08x, disabled 0x%08x\n", |
| s->intregm_pending, s->intregm_disabled); |
| } |
| |
| void slavio_irq_info(Monitor *mon, DeviceState *dev) |
| { |
| #ifndef DEBUG_IRQ_COUNT |
| monitor_printf(mon, "irq statistic code not compiled.\n"); |
| #else |
| SysBusDevice *sd; |
| SLAVIO_INTCTLState *s; |
| int i; |
| int64_t count; |
| |
| sd = sysbus_from_qdev(dev); |
| s = FROM_SYSBUS(SLAVIO_INTCTLState, sd); |
| monitor_printf(mon, "IRQ statistics:\n"); |
| for (i = 0; i < 32; i++) { |
| count = s->irq_count[i]; |
| if (count > 0) |
| monitor_printf(mon, "%2d: %" PRId64 "\n", i, count); |
| } |
| #endif |
| } |
| |
| static const uint32_t intbit_to_level[] = { |
| 2, 3, 5, 7, 9, 11, 13, 2, 3, 5, 7, 9, 11, 13, 12, 12, |
| 6, 13, 4, 10, 8, 9, 11, 0, 0, 0, 0, 15, 15, 15, 15, 0, |
| }; |
| |
| static void slavio_check_interrupts(SLAVIO_INTCTLState *s, int set_irqs) |
| { |
| uint32_t pending = s->intregm_pending, pil_pending; |
| unsigned int i, j; |
| |
| pending &= ~s->intregm_disabled; |
| |
| DPRINTF("pending %x disabled %x\n", pending, s->intregm_disabled); |
| for (i = 0; i < MAX_CPUS; i++) { |
| pil_pending = 0; |
| |
| /* If we are the current interrupt target, get hard interrupts */ |
| if (pending && !(s->intregm_disabled & MASTER_DISABLE) && |
| (i == s->target_cpu)) { |
| for (j = 0; j < 32; j++) { |
| if ((pending & (1 << j)) && intbit_to_level[j]) { |
| pil_pending |= 1 << intbit_to_level[j]; |
| } |
| } |
| } |
| |
| /* Calculate current pending hard interrupts for display */ |
| s->slaves[i].intreg_pending &= CPU_SOFTIRQ_MASK | CPU_IRQ_INT15_IN | |
| CPU_IRQ_TIMER_IN; |
| if (i == s->target_cpu) { |
| for (j = 0; j < 32; j++) { |
| if ((s->intregm_pending & (1 << j)) && intbit_to_level[j]) { |
| s->slaves[i].intreg_pending |= 1 << intbit_to_level[j]; |
| } |
| } |
| } |
| |
| /* Level 15 and CPU timer interrupts are not maskable */ |
| pil_pending |= s->slaves[i].intreg_pending & |
| (CPU_IRQ_INT15_IN | CPU_IRQ_TIMER_IN); |
| |
| /* Add soft interrupts */ |
| pil_pending |= (s->slaves[i].intreg_pending & CPU_SOFTIRQ_MASK) >> 16; |
| |
| if (set_irqs) { |
| for (j = MAX_PILS; j > 0; j--) { |
| if (pil_pending & (1 << j)) { |
| if (!(s->slaves[i].irl_out & (1 << j))) { |
| qemu_irq_raise(s->cpu_irqs[i][j]); |
| } |
| } else { |
| if (s->slaves[i].irl_out & (1 << j)) { |
| qemu_irq_lower(s->cpu_irqs[i][j]); |
| } |
| } |
| } |
| } |
| s->slaves[i].irl_out = pil_pending; |
| } |
| } |
| |
| /* |
| * "irq" here is the bit number in the system interrupt register to |
| * separate serial and keyboard interrupts sharing a level. |
| */ |
| static void slavio_set_irq(void *opaque, int irq, int level) |
| { |
| SLAVIO_INTCTLState *s = opaque; |
| uint32_t mask = 1 << irq; |
| uint32_t pil = intbit_to_level[irq]; |
| unsigned int i; |
| |
| DPRINTF("Set cpu %d irq %d -> pil %d level %d\n", s->target_cpu, irq, pil, |
| level); |
| if (pil > 0) { |
| if (level) { |
| #ifdef DEBUG_IRQ_COUNT |
| s->irq_count[pil]++; |
| #endif |
| s->intregm_pending |= mask; |
| if (pil == 15) { |
| for (i = 0; i < MAX_CPUS; i++) { |
| s->slaves[i].intreg_pending |= 1 << pil; |
| } |
| } |
| } else { |
| s->intregm_pending &= ~mask; |
| if (pil == 15) { |
| for (i = 0; i < MAX_CPUS; i++) { |
| s->slaves[i].intreg_pending &= ~(1 << pil); |
| } |
| } |
| } |
| slavio_check_interrupts(s, 1); |
| } |
| } |
| |
| static void slavio_set_timer_irq_cpu(void *opaque, int cpu, int level) |
| { |
| SLAVIO_INTCTLState *s = opaque; |
| |
| DPRINTF("Set cpu %d local timer level %d\n", cpu, level); |
| |
| if (level) { |
| s->slaves[cpu].intreg_pending |= CPU_IRQ_TIMER_IN; |
| } else { |
| s->slaves[cpu].intreg_pending &= ~CPU_IRQ_TIMER_IN; |
| } |
| |
| slavio_check_interrupts(s, 1); |
| } |
| |
| static void slavio_set_irq_all(void *opaque, int irq, int level) |
| { |
| if (irq < 32) { |
| slavio_set_irq(opaque, irq, level); |
| } else { |
| slavio_set_timer_irq_cpu(opaque, irq - 32, level); |
| } |
| } |
| |
| static int vmstate_intctl_post_load(void *opaque, int version_id) |
| { |
| SLAVIO_INTCTLState *s = opaque; |
| |
| slavio_check_interrupts(s, 0); |
| return 0; |
| } |
| |
| static const VMStateDescription vmstate_intctl_cpu = { |
| .name ="slavio_intctl_cpu", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .minimum_version_id_old = 1, |
| .fields = (VMStateField []) { |
| VMSTATE_UINT32(intreg_pending, SLAVIO_CPUINTCTLState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_intctl = { |
| .name ="slavio_intctl", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .minimum_version_id_old = 1, |
| .post_load = vmstate_intctl_post_load, |
| .fields = (VMStateField []) { |
| VMSTATE_STRUCT_ARRAY(slaves, SLAVIO_INTCTLState, MAX_CPUS, 1, |
| vmstate_intctl_cpu, SLAVIO_CPUINTCTLState), |
| VMSTATE_UINT32(intregm_pending, SLAVIO_INTCTLState), |
| VMSTATE_UINT32(intregm_disabled, SLAVIO_INTCTLState), |
| VMSTATE_UINT32(target_cpu, SLAVIO_INTCTLState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void slavio_intctl_reset(DeviceState *d) |
| { |
| SLAVIO_INTCTLState *s = container_of(d, SLAVIO_INTCTLState, busdev.qdev); |
| int i; |
| |
| for (i = 0; i < MAX_CPUS; i++) { |
| s->slaves[i].intreg_pending = 0; |
| s->slaves[i].irl_out = 0; |
| } |
| s->intregm_disabled = ~MASTER_IRQ_MASK; |
| s->intregm_pending = 0; |
| s->target_cpu = 0; |
| slavio_check_interrupts(s, 0); |
| } |
| |
| static int slavio_intctl_init1(SysBusDevice *dev) |
| { |
| SLAVIO_INTCTLState *s = FROM_SYSBUS(SLAVIO_INTCTLState, dev); |
| int io_memory; |
| unsigned int i, j; |
| |
| qdev_init_gpio_in(&dev->qdev, slavio_set_irq_all, 32 + MAX_CPUS); |
| io_memory = cpu_register_io_memory(slavio_intctlm_mem_read, |
| slavio_intctlm_mem_write, s); |
| sysbus_init_mmio(dev, INTCTLM_SIZE, io_memory); |
| |
| for (i = 0; i < MAX_CPUS; i++) { |
| for (j = 0; j < MAX_PILS; j++) { |
| sysbus_init_irq(dev, &s->cpu_irqs[i][j]); |
| } |
| io_memory = cpu_register_io_memory(slavio_intctl_mem_read, |
| slavio_intctl_mem_write, |
| &s->slaves[i]); |
| sysbus_init_mmio(dev, INTCTL_SIZE, io_memory); |
| s->slaves[i].cpu = i; |
| s->slaves[i].master = s; |
| } |
| |
| return 0; |
| } |
| |
| static SysBusDeviceInfo slavio_intctl_info = { |
| .init = slavio_intctl_init1, |
| .qdev.name = "slavio_intctl", |
| .qdev.size = sizeof(SLAVIO_INTCTLState), |
| .qdev.vmsd = &vmstate_intctl, |
| .qdev.reset = slavio_intctl_reset, |
| }; |
| |
| static void slavio_intctl_register_devices(void) |
| { |
| sysbus_register_withprop(&slavio_intctl_info); |
| } |
| |
| device_init(slavio_intctl_register_devices) |