| #ifndef SCSI_UTILS_H |
| #define SCSI_UTILS_H 1 |
| |
| #ifdef CONFIG_LINUX |
| #include <scsi/sg.h> |
| #endif |
| |
| #define SCSI_CMD_BUF_SIZE 16 |
| #define SCSI_SENSE_LEN 18 |
| #define SCSI_SENSE_LEN_SCANNER 32 |
| #define SCSI_INQUIRY_LEN 36 |
| |
| enum SCSIXferMode { |
| SCSI_XFER_NONE, /* TEST_UNIT_READY, ... */ |
| SCSI_XFER_FROM_DEV, /* READ, INQUIRY, MODE_SENSE, ... */ |
| SCSI_XFER_TO_DEV, /* WRITE, MODE_SELECT, ... */ |
| }; |
| |
| typedef struct SCSICommand { |
| uint8_t buf[SCSI_CMD_BUF_SIZE]; |
| int len; |
| size_t xfer; |
| uint64_t lba; |
| enum SCSIXferMode mode; |
| } SCSICommand; |
| |
| typedef struct SCSISense { |
| uint8_t key; |
| uint8_t asc; |
| uint8_t ascq; |
| } SCSISense; |
| |
| int scsi_build_sense(uint8_t *buf, SCSISense sense); |
| SCSISense scsi_parse_sense_buf(const uint8_t *in_buf, int in_len); |
| int scsi_build_sense_buf(uint8_t *buf, size_t max_size, SCSISense sense, |
| bool fixed_sense); |
| |
| /* |
| * Predefined sense codes |
| */ |
| |
| /* No sense data available */ |
| extern const struct SCSISense sense_code_NO_SENSE; |
| /* LUN not ready, Manual intervention required */ |
| extern const struct SCSISense sense_code_LUN_NOT_READY; |
| /* LUN not ready, Medium not present */ |
| extern const struct SCSISense sense_code_NO_MEDIUM; |
| /* LUN not ready, medium removal prevented */ |
| extern const struct SCSISense sense_code_NOT_READY_REMOVAL_PREVENTED; |
| /* Hardware error, internal target failure */ |
| extern const struct SCSISense sense_code_TARGET_FAILURE; |
| /* Illegal request, invalid command operation code */ |
| extern const struct SCSISense sense_code_INVALID_OPCODE; |
| /* Illegal request, LBA out of range */ |
| extern const struct SCSISense sense_code_LBA_OUT_OF_RANGE; |
| /* Illegal request, Invalid field in CDB */ |
| extern const struct SCSISense sense_code_INVALID_FIELD; |
| /* Illegal request, Invalid field in parameter list */ |
| extern const struct SCSISense sense_code_INVALID_PARAM; |
| /* Illegal request, Parameter list length error */ |
| extern const struct SCSISense sense_code_INVALID_PARAM_LEN; |
| /* Illegal request, LUN not supported */ |
| extern const struct SCSISense sense_code_LUN_NOT_SUPPORTED; |
| /* Illegal request, Saving parameters not supported */ |
| extern const struct SCSISense sense_code_SAVING_PARAMS_NOT_SUPPORTED; |
| /* Illegal request, Incompatible format */ |
| extern const struct SCSISense sense_code_INCOMPATIBLE_FORMAT; |
| /* Illegal request, medium removal prevented */ |
| extern const struct SCSISense sense_code_ILLEGAL_REQ_REMOVAL_PREVENTED; |
| /* Illegal request, Invalid Transfer Tag */ |
| extern const struct SCSISense sense_code_INVALID_TAG; |
| /* Command aborted, I/O process terminated */ |
| extern const struct SCSISense sense_code_IO_ERROR; |
| /* Command aborted, I_T Nexus loss occurred */ |
| extern const struct SCSISense sense_code_I_T_NEXUS_LOSS; |
| /* Command aborted, Logical Unit failure */ |
| extern const struct SCSISense sense_code_LUN_FAILURE; |
| /* Command aborted, LUN Communication failure */ |
| extern const struct SCSISense sense_code_LUN_COMM_FAILURE; |
| /* Command aborted, Overlapped Commands Attempted */ |
| extern const struct SCSISense sense_code_OVERLAPPED_COMMANDS; |
| /* Medium error, Unrecovered read error */ |
| extern const struct SCSISense sense_code_READ_ERROR; |
| /* LUN not ready, Cause not reportable */ |
| extern const struct SCSISense sense_code_NOT_READY; |
| /* Unit attention, Capacity data has changed */ |
| extern const struct SCSISense sense_code_CAPACITY_CHANGED; |
| /* Unit attention, SCSI bus reset */ |
| extern const struct SCSISense sense_code_SCSI_BUS_RESET; |
| /* LUN not ready, Medium not present */ |
| extern const struct SCSISense sense_code_UNIT_ATTENTION_NO_MEDIUM; |
| /* Unit attention, Power on, reset or bus device reset occurred */ |
| extern const struct SCSISense sense_code_RESET; |
| /* Unit attention, Medium may have changed*/ |
| extern const struct SCSISense sense_code_MEDIUM_CHANGED; |
| /* Unit attention, Reported LUNs data has changed */ |
| extern const struct SCSISense sense_code_REPORTED_LUNS_CHANGED; |
| /* Unit attention, Device internal reset */ |
| extern const struct SCSISense sense_code_DEVICE_INTERNAL_RESET; |
| /* Data Protection, Write Protected */ |
| extern const struct SCSISense sense_code_WRITE_PROTECTED; |
| /* Data Protection, Space Allocation Failed Write Protect */ |
| extern const struct SCSISense sense_code_SPACE_ALLOC_FAILED; |
| |
| #define SENSE_CODE(x) sense_code_ ## x |
| |
| int scsi_sense_to_errno(int key, int asc, int ascq); |
| int scsi_sense_buf_to_errno(const uint8_t *sense, size_t sense_size); |
| |
| int scsi_convert_sense(uint8_t *in_buf, int in_len, |
| uint8_t *buf, int len, bool fixed); |
| const char *scsi_command_name(uint8_t cmd); |
| |
| uint64_t scsi_cmd_lba(SCSICommand *cmd); |
| uint32_t scsi_data_cdb_xfer(uint8_t *buf); |
| uint32_t scsi_cdb_xfer(uint8_t *buf); |
| int scsi_cdb_length(uint8_t *buf); |
| |
| /* Linux SG_IO interface. */ |
| #ifdef CONFIG_LINUX |
| #define SG_ERR_DRIVER_TIMEOUT 0x06 |
| #define SG_ERR_DRIVER_SENSE 0x08 |
| |
| #define SG_ERR_DID_OK 0x00 |
| #define SG_ERR_DID_NO_CONNECT 0x01 |
| #define SG_ERR_DID_BUS_BUSY 0x02 |
| #define SG_ERR_DID_TIME_OUT 0x03 |
| |
| #define SG_ERR_DRIVER_SENSE 0x08 |
| |
| int sg_io_sense_from_errno(int errno_value, struct sg_io_hdr *io_hdr, |
| SCSISense *sense); |
| #endif |
| |
| #endif |