| /* |
| * SiFive E series machine interface |
| * |
| * Copyright (c) 2017 SiFive, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2 or later, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #ifndef HW_SIFIVE_E_H |
| #define HW_SIFIVE_E_H |
| |
| #include "hw/riscv/riscv_hart.h" |
| #include "hw/riscv/sifive_cpu.h" |
| #include "hw/gpio/sifive_gpio.h" |
| #include "hw/misc/sifive_e_aon.h" |
| #include "hw/boards.h" |
| |
| #define TYPE_RISCV_E_SOC "riscv.sifive.e.soc" |
| #define RISCV_E_SOC(obj) \ |
| OBJECT_CHECK(SiFiveESoCState, (obj), TYPE_RISCV_E_SOC) |
| |
| typedef struct SiFiveESoCState { |
| /*< private >*/ |
| DeviceState parent_obj; |
| |
| /*< public >*/ |
| RISCVHartArrayState cpus; |
| DeviceState *plic; |
| SiFiveEAONState aon; |
| SIFIVEGPIOState gpio; |
| MemoryRegion xip_mem; |
| MemoryRegion mask_rom; |
| } SiFiveESoCState; |
| |
| typedef struct SiFiveEState { |
| /*< private >*/ |
| MachineState parent_obj; |
| |
| /*< public >*/ |
| SiFiveESoCState soc; |
| bool revb; |
| } SiFiveEState; |
| |
| #define TYPE_RISCV_E_MACHINE MACHINE_TYPE_NAME("sifive_e") |
| #define RISCV_E_MACHINE(obj) \ |
| OBJECT_CHECK(SiFiveEState, (obj), TYPE_RISCV_E_MACHINE) |
| |
| enum { |
| SIFIVE_E_DEV_DEBUG, |
| SIFIVE_E_DEV_MROM, |
| SIFIVE_E_DEV_OTP, |
| SIFIVE_E_DEV_CLINT, |
| SIFIVE_E_DEV_PLIC, |
| SIFIVE_E_DEV_AON, |
| SIFIVE_E_DEV_PRCI, |
| SIFIVE_E_DEV_OTP_CTRL, |
| SIFIVE_E_DEV_GPIO0, |
| SIFIVE_E_DEV_UART0, |
| SIFIVE_E_DEV_QSPI0, |
| SIFIVE_E_DEV_PWM0, |
| SIFIVE_E_DEV_UART1, |
| SIFIVE_E_DEV_QSPI1, |
| SIFIVE_E_DEV_PWM1, |
| SIFIVE_E_DEV_QSPI2, |
| SIFIVE_E_DEV_PWM2, |
| SIFIVE_E_DEV_XIP, |
| SIFIVE_E_DEV_DTIM |
| }; |
| |
| enum { |
| SIFIVE_E_AON_WDT_IRQ = 1, |
| SIFIVE_E_UART0_IRQ = 3, |
| SIFIVE_E_UART1_IRQ = 4, |
| SIFIVE_E_GPIO0_IRQ0 = 8 |
| }; |
| |
| #define SIFIVE_E_PLIC_HART_CONFIG "M" |
| /* |
| * Freedom E310 G002 and G003 supports 52 interrupt sources while |
| * Freedom E310 G000 supports 51 interrupt sources. We use the value |
| * of G002 and G003, so it is 53 (including interrupt source 0). |
| */ |
| #define SIFIVE_E_PLIC_NUM_SOURCES 53 |
| #define SIFIVE_E_PLIC_NUM_PRIORITIES 7 |
| #define SIFIVE_E_PLIC_PRIORITY_BASE 0x00 |
| #define SIFIVE_E_PLIC_PENDING_BASE 0x1000 |
| #define SIFIVE_E_PLIC_ENABLE_BASE 0x2000 |
| #define SIFIVE_E_PLIC_ENABLE_STRIDE 0x80 |
| #define SIFIVE_E_PLIC_CONTEXT_BASE 0x200000 |
| #define SIFIVE_E_PLIC_CONTEXT_STRIDE 0x1000 |
| |
| #endif |