| /* |
| * pcie_sriov.c: |
| * |
| * Implementation of SR/IOV emulation support. |
| * |
| * Copyright (c) 2015-2017 Knut Omang <knut.omang@oracle.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| * |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/pci/pci_device.h" |
| #include "hw/pci/pcie.h" |
| #include "hw/pci/pci_bus.h" |
| #include "hw/qdev-properties.h" |
| #include "qemu/error-report.h" |
| #include "qemu/range.h" |
| #include "qapi/error.h" |
| #include "trace.h" |
| |
| static PCIDevice *register_vf(PCIDevice *pf, int devfn, |
| const char *name, uint16_t vf_num); |
| static void unregister_vfs(PCIDevice *dev); |
| |
| void pcie_sriov_pf_init(PCIDevice *dev, uint16_t offset, |
| const char *vfname, uint16_t vf_dev_id, |
| uint16_t init_vfs, uint16_t total_vfs, |
| uint16_t vf_offset, uint16_t vf_stride) |
| { |
| uint8_t *cfg = dev->config + offset; |
| uint8_t *wmask; |
| |
| pcie_add_capability(dev, PCI_EXT_CAP_ID_SRIOV, 1, |
| offset, PCI_EXT_CAP_SRIOV_SIZEOF); |
| dev->exp.sriov_cap = offset; |
| dev->exp.sriov_pf.num_vfs = 0; |
| dev->exp.sriov_pf.vfname = g_strdup(vfname); |
| dev->exp.sriov_pf.vf = NULL; |
| |
| pci_set_word(cfg + PCI_SRIOV_VF_OFFSET, vf_offset); |
| pci_set_word(cfg + PCI_SRIOV_VF_STRIDE, vf_stride); |
| |
| /* |
| * Mandatory page sizes to support. |
| * Device implementations can call pcie_sriov_pf_add_sup_pgsize() |
| * to set more bits: |
| */ |
| pci_set_word(cfg + PCI_SRIOV_SUP_PGSIZE, SRIOV_SUP_PGSIZE_MINREQ); |
| |
| /* |
| * Default is to use 4K pages, software can modify it |
| * to any of the supported bits |
| */ |
| pci_set_word(cfg + PCI_SRIOV_SYS_PGSIZE, 0x1); |
| |
| /* Set up device ID and initial/total number of VFs available */ |
| pci_set_word(cfg + PCI_SRIOV_VF_DID, vf_dev_id); |
| pci_set_word(cfg + PCI_SRIOV_INITIAL_VF, init_vfs); |
| pci_set_word(cfg + PCI_SRIOV_TOTAL_VF, total_vfs); |
| pci_set_word(cfg + PCI_SRIOV_NUM_VF, 0); |
| |
| /* Write enable control bits */ |
| wmask = dev->wmask + offset; |
| pci_set_word(wmask + PCI_SRIOV_CTRL, |
| PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE | PCI_SRIOV_CTRL_ARI); |
| pci_set_word(wmask + PCI_SRIOV_NUM_VF, 0xffff); |
| pci_set_word(wmask + PCI_SRIOV_SYS_PGSIZE, 0x553); |
| |
| qdev_prop_set_bit(&dev->qdev, "multifunction", true); |
| } |
| |
| void pcie_sriov_pf_exit(PCIDevice *dev) |
| { |
| unregister_vfs(dev); |
| g_free((char *)dev->exp.sriov_pf.vfname); |
| dev->exp.sriov_pf.vfname = NULL; |
| } |
| |
| void pcie_sriov_pf_init_vf_bar(PCIDevice *dev, int region_num, |
| uint8_t type, dma_addr_t size) |
| { |
| uint32_t addr; |
| uint64_t wmask; |
| uint16_t sriov_cap = dev->exp.sriov_cap; |
| |
| assert(sriov_cap > 0); |
| assert(region_num >= 0); |
| assert(region_num < PCI_NUM_REGIONS); |
| assert(region_num != PCI_ROM_SLOT); |
| |
| wmask = ~(size - 1); |
| addr = sriov_cap + PCI_SRIOV_BAR + region_num * 4; |
| |
| pci_set_long(dev->config + addr, type); |
| if (!(type & PCI_BASE_ADDRESS_SPACE_IO) && |
| type & PCI_BASE_ADDRESS_MEM_TYPE_64) { |
| pci_set_quad(dev->wmask + addr, wmask); |
| pci_set_quad(dev->cmask + addr, ~0ULL); |
| } else { |
| pci_set_long(dev->wmask + addr, wmask & 0xffffffff); |
| pci_set_long(dev->cmask + addr, 0xffffffff); |
| } |
| dev->exp.sriov_pf.vf_bar_type[region_num] = type; |
| } |
| |
| void pcie_sriov_vf_register_bar(PCIDevice *dev, int region_num, |
| MemoryRegion *memory) |
| { |
| PCIIORegion *r; |
| PCIBus *bus = pci_get_bus(dev); |
| uint8_t type; |
| pcibus_t size = memory_region_size(memory); |
| |
| assert(pci_is_vf(dev)); /* PFs must use pci_register_bar */ |
| assert(region_num >= 0); |
| assert(region_num < PCI_NUM_REGIONS); |
| type = dev->exp.sriov_vf.pf->exp.sriov_pf.vf_bar_type[region_num]; |
| |
| if (!is_power_of_2(size)) { |
| error_report("%s: PCI region size must be a power" |
| " of two - type=0x%x, size=0x%"FMT_PCIBUS, |
| __func__, type, size); |
| exit(1); |
| } |
| |
| r = &dev->io_regions[region_num]; |
| r->memory = memory; |
| r->address_space = |
| type & PCI_BASE_ADDRESS_SPACE_IO |
| ? bus->address_space_io |
| : bus->address_space_mem; |
| r->size = size; |
| r->type = type; |
| |
| r->addr = pci_bar_address(dev, region_num, r->type, r->size); |
| if (r->addr != PCI_BAR_UNMAPPED) { |
| memory_region_add_subregion_overlap(r->address_space, |
| r->addr, r->memory, 1); |
| } |
| } |
| |
| static PCIDevice *register_vf(PCIDevice *pf, int devfn, const char *name, |
| uint16_t vf_num) |
| { |
| PCIDevice *dev = pci_new(devfn, name); |
| dev->exp.sriov_vf.pf = pf; |
| dev->exp.sriov_vf.vf_number = vf_num; |
| PCIBus *bus = pci_get_bus(pf); |
| Error *local_err = NULL; |
| |
| qdev_realize(&dev->qdev, &bus->qbus, &local_err); |
| if (local_err) { |
| error_report_err(local_err); |
| return NULL; |
| } |
| |
| /* set vid/did according to sr/iov spec - they are not used */ |
| pci_config_set_vendor_id(dev->config, 0xffff); |
| pci_config_set_device_id(dev->config, 0xffff); |
| |
| return dev; |
| } |
| |
| static void register_vfs(PCIDevice *dev) |
| { |
| uint16_t num_vfs; |
| uint16_t i; |
| uint16_t sriov_cap = dev->exp.sriov_cap; |
| uint16_t vf_offset = |
| pci_get_word(dev->config + sriov_cap + PCI_SRIOV_VF_OFFSET); |
| uint16_t vf_stride = |
| pci_get_word(dev->config + sriov_cap + PCI_SRIOV_VF_STRIDE); |
| int32_t devfn = dev->devfn + vf_offset; |
| |
| assert(sriov_cap > 0); |
| num_vfs = pci_get_word(dev->config + sriov_cap + PCI_SRIOV_NUM_VF); |
| |
| dev->exp.sriov_pf.vf = g_new(PCIDevice *, num_vfs); |
| assert(dev->exp.sriov_pf.vf); |
| |
| trace_sriov_register_vfs(dev->name, PCI_SLOT(dev->devfn), |
| PCI_FUNC(dev->devfn), num_vfs); |
| for (i = 0; i < num_vfs; i++) { |
| dev->exp.sriov_pf.vf[i] = register_vf(dev, devfn, |
| dev->exp.sriov_pf.vfname, i); |
| if (!dev->exp.sriov_pf.vf[i]) { |
| num_vfs = i; |
| break; |
| } |
| devfn += vf_stride; |
| } |
| dev->exp.sriov_pf.num_vfs = num_vfs; |
| } |
| |
| static void unregister_vfs(PCIDevice *dev) |
| { |
| Error *local_err = NULL; |
| uint16_t num_vfs = dev->exp.sriov_pf.num_vfs; |
| uint16_t i; |
| |
| trace_sriov_unregister_vfs(dev->name, PCI_SLOT(dev->devfn), |
| PCI_FUNC(dev->devfn), num_vfs); |
| for (i = 0; i < num_vfs; i++) { |
| PCIDevice *vf = dev->exp.sriov_pf.vf[i]; |
| object_property_set_bool(OBJECT(vf), "realized", false, &local_err); |
| if (local_err) { |
| fprintf(stderr, "Failed to unplug: %s\n", |
| error_get_pretty(local_err)); |
| error_free(local_err); |
| } |
| object_unparent(OBJECT(vf)); |
| object_unref(OBJECT(vf)); |
| } |
| g_free(dev->exp.sriov_pf.vf); |
| dev->exp.sriov_pf.vf = NULL; |
| dev->exp.sriov_pf.num_vfs = 0; |
| pci_set_word(dev->config + dev->exp.sriov_cap + PCI_SRIOV_NUM_VF, 0); |
| } |
| |
| void pcie_sriov_config_write(PCIDevice *dev, uint32_t address, |
| uint32_t val, int len) |
| { |
| uint32_t off; |
| uint16_t sriov_cap = dev->exp.sriov_cap; |
| |
| if (!sriov_cap || address < sriov_cap) { |
| return; |
| } |
| off = address - sriov_cap; |
| if (off >= PCI_EXT_CAP_SRIOV_SIZEOF) { |
| return; |
| } |
| |
| trace_sriov_config_write(dev->name, PCI_SLOT(dev->devfn), |
| PCI_FUNC(dev->devfn), off, val, len); |
| |
| if (range_covers_byte(off, len, PCI_SRIOV_CTRL)) { |
| if (dev->exp.sriov_pf.num_vfs) { |
| if (!(val & PCI_SRIOV_CTRL_VFE)) { |
| unregister_vfs(dev); |
| } |
| } else { |
| if (val & PCI_SRIOV_CTRL_VFE) { |
| register_vfs(dev); |
| } |
| } |
| } |
| } |
| |
| |
| /* Reset SR/IOV VF Enable bit to trigger an unregister of all VFs */ |
| void pcie_sriov_pf_disable_vfs(PCIDevice *dev) |
| { |
| uint16_t sriov_cap = dev->exp.sriov_cap; |
| if (sriov_cap) { |
| uint32_t val = pci_get_byte(dev->config + sriov_cap + PCI_SRIOV_CTRL); |
| if (val & PCI_SRIOV_CTRL_VFE) { |
| val &= ~PCI_SRIOV_CTRL_VFE; |
| pcie_sriov_config_write(dev, sriov_cap + PCI_SRIOV_CTRL, val, 1); |
| } |
| } |
| } |
| |
| /* Add optional supported page sizes to the mask of supported page sizes */ |
| void pcie_sriov_pf_add_sup_pgsize(PCIDevice *dev, uint16_t opt_sup_pgsize) |
| { |
| uint8_t *cfg = dev->config + dev->exp.sriov_cap; |
| uint8_t *wmask = dev->wmask + dev->exp.sriov_cap; |
| |
| uint16_t sup_pgsize = pci_get_word(cfg + PCI_SRIOV_SUP_PGSIZE); |
| |
| sup_pgsize |= opt_sup_pgsize; |
| |
| /* |
| * Make sure the new bits are set, and that system page size |
| * also can be set to any of the new values according to spec: |
| */ |
| pci_set_word(cfg + PCI_SRIOV_SUP_PGSIZE, sup_pgsize); |
| pci_set_word(wmask + PCI_SRIOV_SYS_PGSIZE, sup_pgsize); |
| } |
| |
| |
| uint16_t pcie_sriov_vf_number(PCIDevice *dev) |
| { |
| assert(pci_is_vf(dev)); |
| return dev->exp.sriov_vf.vf_number; |
| } |
| |
| PCIDevice *pcie_sriov_get_pf(PCIDevice *dev) |
| { |
| return dev->exp.sriov_vf.pf; |
| } |
| |
| PCIDevice *pcie_sriov_get_vf_at_index(PCIDevice *dev, int n) |
| { |
| assert(!pci_is_vf(dev)); |
| if (n < dev->exp.sriov_pf.num_vfs) { |
| return dev->exp.sriov_pf.vf[n]; |
| } |
| return NULL; |
| } |
| |
| uint16_t pcie_sriov_num_vfs(PCIDevice *dev) |
| { |
| return dev->exp.sriov_pf.num_vfs; |
| } |