qapi/run-state.json - qemu - Git at Google

 # -*- Mode: Python -*-
 # vim: filetype=python
 #

 ##
 # = VM run state
 ##

 ##
 # @RunState:
 #
 # An enumeration of VM run states.
 #
 # @debug: QEMU is running on a debugger
 #
 # @finish-migrate: guest is paused to finish the migration process
 #
 # @inmigrate: guest is paused waiting for an incoming migration.  Note
 #     that this state does not tell whether the machine will start at
 #     the end of the migration.  This depends on the command-line -S
 #     option and any invocation of 'stop' or 'cont' that has happened
 #     since QEMU was started.
 #
 # @internal-error: An internal error that prevents further guest
 #     execution has occurred
 #
 # @io-error: the last IOP has failed and the device is configured to
 #     pause on I/O errors
 #
 # @paused: guest has been paused via the 'stop' command
 #
 # @postmigrate: guest is paused following a successful 'migrate'
 #
 # @prelaunch: QEMU was started with -S and guest has not started
 #
 # @restore-vm: guest is paused to restore VM state
 #
 # @running: guest is actively running
 #
 # @save-vm: guest is paused to save the VM state
 #
 # @shutdown: guest is shut down (and -no-shutdown is in use)
 #
 # @suspended: guest is suspended (ACPI S3)
 #
 # @watchdog: the watchdog action is configured to pause and has been
 #     triggered
 #
 # @guest-panicked: guest has been panicked as a result of guest OS
 #     panic
 #
 # @colo: guest is paused to save/restore VM state under colo
 #     checkpoint, VM can not get into this state unless colo
 #     capability is enabled for migration.  (since 2.8)
 ##
 { 'enum': 'RunState',
   'data': [ 'debug', 'inmigrate', 'internal-error', 'io-error', 'paused',
             'postmigrate', 'prelaunch', 'finish-migrate', 'restore-vm',
             'running', 'save-vm', 'shutdown', 'suspended', 'watchdog',
             'guest-panicked', 'colo' ] }

 ##
 # @ShutdownCause:
 #
 # An enumeration of reasons for a Shutdown.
 #
 # @none: No shutdown request pending
 #
 # @host-error: An error prevents further use of guest
 #
 # @host-qmp-quit: Reaction to the QMP command 'quit'
 #
 # @host-qmp-system-reset: Reaction to the QMP command 'system_reset'
 #
 # @host-signal: Reaction to a signal, such as SIGINT
 #
 # @host-ui: Reaction to a UI event, like window close
 #
 # @guest-shutdown: Guest shutdown/suspend request, via ACPI or other
 #     hardware-specific means
 #
 # @guest-reset: Guest reset request, and command line turns that into
 #     a shutdown
 #
 # @guest-panic: Guest panicked, and command line turns that into a
 #     shutdown
 #
 # @subsystem-reset: Partial guest reset that does not trigger QMP
 #     events and ignores --no-reboot.  This is useful for sanitizing
 #     hypercalls on s390 that are used during kexec/kdump/boot
 #
 # @snapshot-load: A snapshot is being loaded by the record & replay
 #     subsystem.  This value is used only within QEMU.  It doesn't
 #     occur in QMP.  (since 7.2)
 ##
 { 'enum': 'ShutdownCause',
   # Beware, shutdown_caused_by_guest() depends on enumeration order
   'data': [ 'none', 'host-error', 'host-qmp-quit', 'host-qmp-system-reset',
             'host-signal', 'host-ui', 'guest-shutdown', 'guest-reset',
             'guest-panic', 'subsystem-reset', 'snapshot-load'] }

 ##
 # @StatusInfo:
 #
 # Information about VM run state
 #
 # @running: true if all VCPUs are runnable, false if not runnable
 #
 # @status: the virtual machine @RunState
 #
 # Since: 0.14
 ##
 { 'struct': 'StatusInfo',
   'data': {'running': 'bool',
            'status': 'RunState'} }

 ##
 # @query-status:
 #
 # Query the run status of the VM
 #
 # Returns: @StatusInfo reflecting the VM
 #
 # Since: 0.14
 #
 # Example:
 #
 #     -> { "execute": "query-status" }
 #     <- { "return": { "running": true,
 #                      "status": "running" } }
 ##
 { 'command': 'query-status', 'returns': 'StatusInfo',
   'allow-preconfig': true }

 ##
 # @SHUTDOWN:
 #
 # Emitted when the virtual machine has shut down, indicating that qemu
 # is about to exit.
 #
 # @guest: If true, the shutdown was triggered by a guest request (such
 #     as a guest-initiated ACPI shutdown request or other
 #     hardware-specific action) rather than a host request (such as
 #     sending qemu a SIGINT).  (since 2.10)
 #
 # @reason: The @ShutdownCause which resulted in the SHUTDOWN.
 #     (since 4.0)
 #
 # Note: If the command-line option "-no-shutdown" has been specified,
 #     qemu will not exit, and a STOP event will eventually follow the
 #     SHUTDOWN event
 #
 # Since: 0.12
 #
 # Example:
 #
 #     <- { "event": "SHUTDOWN",
 #          "data": { "guest": true, "reason": "guest-shutdown" },
 #          "timestamp": { "seconds": 1267040730, "microseconds": 682951 } }
 ##
 { 'event': 'SHUTDOWN', 'data': { 'guest': 'bool', 'reason': 'ShutdownCause' } }

 ##
 # @POWERDOWN:
 #
 # Emitted when the virtual machine is powered down through the power
 # control system, such as via ACPI.
 #
 # Since: 0.12
 #
 # Example:
 #
 #     <- { "event": "POWERDOWN",
 #          "timestamp": { "seconds": 1267040730, "microseconds": 682951 } }
 ##
 { 'event': 'POWERDOWN' }

 ##
 # @RESET:
 #
 # Emitted when the virtual machine is reset
 #
 # @guest: If true, the reset was triggered by a guest request (such as
 #     a guest-initiated ACPI reboot request or other hardware-specific
 #     action) rather than a host request (such as the QMP command
 #     system_reset).  (since 2.10)
 #
 # @reason: The @ShutdownCause of the RESET.  (since 4.0)
 #
 # Since: 0.12
 #
 # Example:
 #
 #     <- { "event": "RESET",
 #          "data": { "guest": false, "reason": "guest-reset" },
 #          "timestamp": { "seconds": 1267041653, "microseconds": 9518 } }
 ##
 { 'event': 'RESET', 'data': { 'guest': 'bool', 'reason': 'ShutdownCause' } }

 ##
 # @STOP:
 #
 # Emitted when the virtual machine is stopped
 #
 # Since: 0.12
 #
 # Example:
 #
 #     <- { "event": "STOP",
 #          "timestamp": { "seconds": 1267041730, "microseconds": 281295 } }
 ##
 { 'event': 'STOP' }

 ##
 # @RESUME:
 #
 # Emitted when the virtual machine resumes execution
 #
 # Since: 0.12
 #
 # Example:
 #
 #     <- { "event": "RESUME",
 #          "timestamp": { "seconds": 1271770767, "microseconds": 582542 } }
 ##
 { 'event': 'RESUME' }

 ##
 # @SUSPEND:
 #
 # Emitted when guest enters a hardware suspension state, for example,
 # S3 state, which is sometimes called standby state
 #
 # Since: 1.1
 #
 # Example:
 #
 #     <- { "event": "SUSPEND",
 #          "timestamp": { "seconds": 1344456160, "microseconds": 309119 } }
 ##
 { 'event': 'SUSPEND' }

 ##
 # @SUSPEND_DISK:
 #
 # Emitted when guest enters a hardware suspension state with data
 # saved on disk, for example, S4 state, which is sometimes called
 # hibernate state
 #
 # Note: QEMU shuts down (similar to event @SHUTDOWN) when entering
 #     this state
 #
 # Since: 1.2
 #
 # Example:
 #
 #     <- { "event": "SUSPEND_DISK",
 #          "timestamp": { "seconds": 1344456160, "microseconds": 309119 } }
 ##
 { 'event': 'SUSPEND_DISK' }

 ##
 # @WAKEUP:
 #
 # Emitted when the guest has woken up from suspend state and is
 # running
 #
 # Since: 1.1
 #
 # Example:
 #
 #     <- { "event": "WAKEUP",
 #          "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
 ##
 { 'event': 'WAKEUP' }

 ##
 # @WATCHDOG:
 #
 # Emitted when the watchdog device's timer is expired
 #
 # @action: action that has been taken
 #
 # Note: If action is "reset", "shutdown", or "pause" the WATCHDOG
 #     event is followed respectively by the RESET, SHUTDOWN, or STOP
 #     events
 #
 # Note: This event is rate-limited.
 #
 # Since: 0.13
 #
 # Example:
 #
 #     <- { "event": "WATCHDOG",
 #          "data": { "action": "reset" },
 #          "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
 ##
 { 'event': 'WATCHDOG',
   'data': { 'action': 'WatchdogAction' } }

 ##
 # @WatchdogAction:
 #
 # An enumeration of the actions taken when the watchdog device's timer
 # is expired
 #
 # @reset: system resets
 #
 # @shutdown: system shutdown, note that it is similar to @powerdown,
 #     which tries to set to system status and notify guest
 #
 # @poweroff: system poweroff, the emulator program exits
 #
 # @pause: system pauses, similar to @stop
 #
 # @debug: system enters debug state
 #
 # @none: nothing is done
 #
 # @inject-nmi: a non-maskable interrupt is injected into the first
 #     VCPU (all VCPUS on x86) (since 2.4)
 #
 # Since: 2.1
 ##
 { 'enum': 'WatchdogAction',
   'data': [ 'reset', 'shutdown', 'poweroff', 'pause', 'debug', 'none',
             'inject-nmi' ] }

 ##
 # @RebootAction:
 #
 # Possible QEMU actions upon guest reboot
 #
 # @reset: Reset the VM
 #
 # @shutdown: Shutdown the VM and exit, according to the shutdown
 #     action
 #
 # Since: 6.0
 ##
 { 'enum': 'RebootAction',
   'data': [ 'reset', 'shutdown' ] }

 ##
 # @ShutdownAction:
 #
 # Possible QEMU actions upon guest shutdown
 #
 # @poweroff: Shutdown the VM and exit
 #
 # @pause: pause the VM
 #
 # Since: 6.0
 ##
 { 'enum': 'ShutdownAction',
   'data': [ 'poweroff', 'pause' ] }

 ##
 # @PanicAction:
 #
 # @none: Continue VM execution
 #
 # @pause: Pause the VM
 #
 # @shutdown: Shutdown the VM and exit, according to the shutdown
 #     action
 #
 # @exit-failure: Shutdown the VM and exit with nonzero status (since
 #     7.1)
 #
 # Since: 6.0
 ##
 { 'enum': 'PanicAction',
   'data': [ 'pause', 'shutdown', 'exit-failure', 'none' ] }

 ##
 # @watchdog-set-action:
 #
 # Set watchdog action.
 #
 # @action: @WatchdogAction action taken when watchdog timer expires.
 #
 # Since: 2.11
 #
 # Example:
 #
 #     -> { "execute": "watchdog-set-action",
 #          "arguments": { "action": "inject-nmi" } }
 #     <- { "return": {} }
 ##
 { 'command': 'watchdog-set-action', 'data' : {'action': 'WatchdogAction'} }

 ##
 # @set-action:
 #
 # Set the actions that will be taken by the emulator in response to
 # guest events.
 #
 # @reboot: @RebootAction action taken on guest reboot.
 #
 # @shutdown: @ShutdownAction action taken on guest shutdown.
 #
 # @panic: @PanicAction action taken on guest panic.
 #
 # @watchdog: @WatchdogAction action taken when watchdog timer expires.
 #
 # Since: 6.0
 #
 # Example:
 #
 #     -> { "execute": "set-action",
 #          "arguments": { "reboot": "shutdown",
 #                         "shutdown" : "pause",
 #                         "panic": "pause",
 #                         "watchdog": "inject-nmi" } }
 #     <- { "return": {} }
 ##
 { 'command': 'set-action',
   'data': { '*reboot': 'RebootAction',
             '*shutdown': 'ShutdownAction',
             '*panic': 'PanicAction',
             '*watchdog': 'WatchdogAction' },
   'allow-preconfig': true }

 ##
 # @GUEST_PANICKED:
 #
 # Emitted when guest OS panic is detected
 #
 # @action: action that has been taken, currently always "pause"
 #
 # @info: information about a panic (since 2.9)
 #
 # Since: 1.5
 #
 # Example:
 #
 #     <- { "event": "GUEST_PANICKED",
 #          "data": { "action": "pause" },
 #          "timestamp": { "seconds": 1648245231, "microseconds": 900001 } }
 ##
 { 'event': 'GUEST_PANICKED',
   'data': { 'action': 'GuestPanicAction', '*info': 'GuestPanicInformation' } }

 ##
 # @GUEST_CRASHLOADED:
 #
 # Emitted when guest OS crash loaded is detected
 #
 # @action: action that has been taken, currently always "run"
 #
 # @info: information about a panic
 #
 # Since: 5.0
 #
 # Example:
 #
 #     <- { "event": "GUEST_CRASHLOADED",
 #          "data": { "action": "run" },
 #          "timestamp": { "seconds": 1648245259, "microseconds": 893771 } }
 ##
 { 'event': 'GUEST_CRASHLOADED',
   'data': { 'action': 'GuestPanicAction', '*info': 'GuestPanicInformation' } }

 ##
 # @GuestPanicAction:
 #
 # An enumeration of the actions taken when guest OS panic is detected
 #
 # @pause: system pauses
 #
 # @poweroff: system powers off (since 2.8)
 #
 # @run: system continues to run (since 5.0)
 #
 # Since: 2.1
 ##
 { 'enum': 'GuestPanicAction',
   'data': [ 'pause', 'poweroff', 'run' ] }

 ##
 # @GuestPanicInformationType:
 #
 # An enumeration of the guest panic information types
 #
 # @hyper-v: hyper-v guest panic information type
 #
 # @s390: s390 guest panic information type (Since: 2.12)
 #
 # Since: 2.9
 ##
 { 'enum': 'GuestPanicInformationType',
   'data': [ 'hyper-v', 's390' ] }

 ##
 # @GuestPanicInformation:
 #
 # Information about a guest panic
 #
 # @type: Crash type that defines the hypervisor specific information
 #
 # Since: 2.9
 ##
 {'union': 'GuestPanicInformation',
  'base': {'type': 'GuestPanicInformationType'},
  'discriminator': 'type',
  'data': {'hyper-v': 'GuestPanicInformationHyperV',
           's390': 'GuestPanicInformationS390'}}

 ##
 # @GuestPanicInformationHyperV:
 #
 # Hyper-V specific guest panic information (HV crash MSRs)
 #
 # @arg1: for Windows, STOP code for the guest crash.  For Linux,
 #        an error code.
 #
 # @arg2: for Windows, first argument of the STOP.  For Linux, the
 #        guest OS ID, which has the kernel version in bits 16-47
 #        and 0x8100 in bits 48-63.
 #
 # @arg3: for Windows, second argument of the STOP.  For Linux, the
 #        program counter of the guest.
 #
 # @arg4: for Windows, third argument of the STOP.  For Linux, the
 #        RAX register (x86) or the stack pointer (aarch64) of the guest.
 #
 # @arg5: for Windows, fourth argument of the STOP.  For x86 Linux, the
 #        stack pointer of the guest.
 #
 # Since: 2.9
 ##
 {'struct': 'GuestPanicInformationHyperV',
  'data': {'arg1': 'uint64',
           'arg2': 'uint64',
           'arg3': 'uint64',
           'arg4': 'uint64',
           'arg5': 'uint64'}}

 ##
 # @S390CrashReason:
 #
 # Reason why the CPU is in a crashed state.
 #
 # @unknown: no crash reason was set
 #
 # @disabled-wait: the CPU has entered a disabled wait state
 #
 # @extint-loop: clock comparator or cpu timer interrupt with new PSW
 #     enabled for external interrupts
 #
 # @pgmint-loop: program interrupt with BAD new PSW
 #
 # @opint-loop: operation exception interrupt with invalid code at the
 #     program interrupt new PSW
 #
 # Since: 2.12
 ##
 { 'enum': 'S390CrashReason',
   'data': [ 'unknown',
             'disabled-wait',
             'extint-loop',
             'pgmint-loop',
             'opint-loop' ] }

 ##
 # @GuestPanicInformationS390:
 #
 # S390 specific guest panic information (PSW)
 #
 # @core: core id of the CPU that crashed
 #
 # @psw-mask: control fields of guest PSW
 #
 # @psw-addr: guest instruction address
 #
 # @reason: guest crash reason
 #
 # Since: 2.12
 ##
 {'struct': 'GuestPanicInformationS390',
  'data': {'core': 'uint32',
           'psw-mask': 'uint64',
           'psw-addr': 'uint64',
           'reason': 'S390CrashReason'}}

 ##
 # @MEMORY_FAILURE:
 #
 # Emitted when a memory failure occurs on host side.
 #
 # @recipient: recipient is defined as @MemoryFailureRecipient.
 #
 # @action: action that has been taken.
 #
 # @flags: flags for MemoryFailureAction.
 #
 # Since: 5.2
 #
 # Example:
 #
 #     <- { "event": "MEMORY_FAILURE",
 #          "data": { "recipient": "hypervisor",
 #                    "action": "fatal",
 #                    "flags": { "action-required": false,
 #                               "recursive": false } },
 #          "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
 ##
 { 'event': 'MEMORY_FAILURE',
   'data': { 'recipient': 'MemoryFailureRecipient',
             'action': 'MemoryFailureAction',
             'flags': 'MemoryFailureFlags'} }

 ##
 # @MemoryFailureRecipient:
 #
 # Hardware memory failure occurs, handled by recipient.
 #
 # @hypervisor: memory failure at QEMU process address space.  (none
 #     guest memory, but used by QEMU itself).
 #
 # @guest: memory failure at guest memory,
 #
 # Since: 5.2
 ##
 { 'enum': 'MemoryFailureRecipient',
   'data': [ 'hypervisor',
             'guest' ] }

 ##
 # @MemoryFailureAction:
 #
 # Actions taken by QEMU in response to a hardware memory failure.
 #
 # @ignore: the memory failure could be ignored.  This will only be the
 #     case for action-optional failures.
 #
 # @inject: memory failure occurred in guest memory, the guest enabled
 #     MCE handling mechanism, and QEMU could inject the MCE into the
 #     guest successfully.
 #
 # @fatal: the failure is unrecoverable.  This occurs for
 #     action-required failures if the recipient is the hypervisor;
 #     QEMU will exit.
 #
 # @reset: the failure is unrecoverable but confined to the guest.
 #     This occurs if the recipient is a guest guest which is not ready
 #     to handle memory failures.
 #
 # Since: 5.2
 ##
 { 'enum': 'MemoryFailureAction',
   'data': [ 'ignore',
             'inject',
             'fatal',
             'reset' ] }

 ##
 # @MemoryFailureFlags:
 #
 # Additional information on memory failures.
 #
 # @action-required: whether a memory failure event is action-required
 #     or action-optional (e.g. a failure during memory scrub).
 #
 # @recursive: whether the failure occurred while the previous failure
 #     was still in progress.
 #
 # Since: 5.2
 ##
 { 'struct': 'MemoryFailureFlags',
   'data': { 'action-required': 'bool',
             'recursive': 'bool'} }

 ##
 # @NotifyVmexitOption:
 #
 # An enumeration of the options specified when enabling notify VM exit
 #
 # @run: enable the feature, do nothing and continue if the notify VM
 #     exit happens.
 #
 # @internal-error: enable the feature, raise a internal error if the
 #     notify VM exit happens.
 #
 # @disable: disable the feature.
 #
 # Since: 7.2
 ##
 { 'enum': 'NotifyVmexitOption',
   'data': [ 'run', 'internal-error', 'disable' ] }
	# -- Mode: Python --
	# vim: filetype=python
	#

	##
	# = VM run state
	##

	##
	# @RunState:
	#
	# An enumeration of VM run states.
	#
	# @debug: QEMU is running on a debugger
	#
	# @finish-migrate: guest is paused to finish the migration process
	#
	# @inmigrate: guest is paused waiting for an incoming migration. Note
	# that this state does not tell whether the machine will start at
	# the end of the migration. This depends on the command-line -S
	# option and any invocation of 'stop' or 'cont' that has happened
	# since QEMU was started.
	#
	# @internal-error: An internal error that prevents further guest
	# execution has occurred
	#
	# @io-error: the last IOP has failed and the device is configured to
	# pause on I/O errors
	#
	# @paused: guest has been paused via the 'stop' command
	#
	# @postmigrate: guest is paused following a successful 'migrate'
	#
	# @prelaunch: QEMU was started with -S and guest has not started
	#
	# @restore-vm: guest is paused to restore VM state
	#
	# @running: guest is actively running
	#
	# @save-vm: guest is paused to save the VM state
	#
	# @shutdown: guest is shut down (and -no-shutdown is in use)
	#
	# @suspended: guest is suspended (ACPI S3)
	#
	# @watchdog: the watchdog action is configured to pause and has been
	# triggered
	#
	# @guest-panicked: guest has been panicked as a result of guest OS
	# panic
	#
	# @colo: guest is paused to save/restore VM state under colo
	# checkpoint, VM can not get into this state unless colo
	# capability is enabled for migration. (since 2.8)
	##
	{ 'enum': 'RunState',
	'data': [ 'debug', 'inmigrate', 'internal-error', 'io-error', 'paused',
	'postmigrate', 'prelaunch', 'finish-migrate', 'restore-vm',
	'running', 'save-vm', 'shutdown', 'suspended', 'watchdog',
	'guest-panicked', 'colo' ] }

	##
	# @ShutdownCause:
	#
	# An enumeration of reasons for a Shutdown.
	#
	# @none: No shutdown request pending
	#
	# @host-error: An error prevents further use of guest
	#
	# @host-qmp-quit: Reaction to the QMP command 'quit'
	#
	# @host-qmp-system-reset: Reaction to the QMP command 'system_reset'
	#
	# @host-signal: Reaction to a signal, such as SIGINT
	#
	# @host-ui: Reaction to a UI event, like window close
	#
	# @guest-shutdown: Guest shutdown/suspend request, via ACPI or other
	# hardware-specific means
	#
	# @guest-reset: Guest reset request, and command line turns that into
	# a shutdown
	#
	# @guest-panic: Guest panicked, and command line turns that into a
	# shutdown
	#
	# @subsystem-reset: Partial guest reset that does not trigger QMP
	# events and ignores --no-reboot. This is useful for sanitizing
	# hypercalls on s390 that are used during kexec/kdump/boot
	#
	# @snapshot-load: A snapshot is being loaded by the record & replay
	# subsystem. This value is used only within QEMU. It doesn't
	# occur in QMP. (since 7.2)
	##
	{ 'enum': 'ShutdownCause',
	# Beware, shutdown_caused_by_guest() depends on enumeration order
	'data': [ 'none', 'host-error', 'host-qmp-quit', 'host-qmp-system-reset',
	'host-signal', 'host-ui', 'guest-shutdown', 'guest-reset',
	'guest-panic', 'subsystem-reset', 'snapshot-load'] }

	##
	# @StatusInfo:
	#
	# Information about VM run state
	#
	# @running: true if all VCPUs are runnable, false if not runnable
	#
	# @status: the virtual machine @RunState
	#
	# Since: 0.14
	##
	{ 'struct': 'StatusInfo',
	'data': {'running': 'bool',
	'status': 'RunState'} }

	##
	# @query-status:
	#
	# Query the run status of the VM
	#
	# Returns: @StatusInfo reflecting the VM
	#
	# Since: 0.14
	#
	# Example:
	#
	# -> { "execute": "query-status" }
	# <- { "return": { "running": true,
	# "status": "running" } }
	##
	{ 'command': 'query-status', 'returns': 'StatusInfo',
	'allow-preconfig': true }

	##
	# @SHUTDOWN:
	#
	# Emitted when the virtual machine has shut down, indicating that qemu
	# is about to exit.
	#
	# @guest: If true, the shutdown was triggered by a guest request (such
	# as a guest-initiated ACPI shutdown request or other
	# hardware-specific action) rather than a host request (such as
	# sending qemu a SIGINT). (since 2.10)
	#
	# @reason: The @ShutdownCause which resulted in the SHUTDOWN.
	# (since 4.0)
	#
	# Note: If the command-line option "-no-shutdown" has been specified,
	# qemu will not exit, and a STOP event will eventually follow the
	# SHUTDOWN event
	#
	# Since: 0.12
	#
	# Example:
	#
	# <- { "event": "SHUTDOWN",
	# "data": { "guest": true, "reason": "guest-shutdown" },
	# "timestamp": { "seconds": 1267040730, "microseconds": 682951 } }
	##
	{ 'event': 'SHUTDOWN', 'data': { 'guest': 'bool', 'reason': 'ShutdownCause' } }

	##
	# @POWERDOWN:
	#
	# Emitted when the virtual machine is powered down through the power
	# control system, such as via ACPI.
	#
	# Since: 0.12
	#
	# Example:
	#
	# <- { "event": "POWERDOWN",
	# "timestamp": { "seconds": 1267040730, "microseconds": 682951 } }
	##
	{ 'event': 'POWERDOWN' }

	##
	# @RESET:
	#
	# Emitted when the virtual machine is reset
	#
	# @guest: If true, the reset was triggered by a guest request (such as
	# a guest-initiated ACPI reboot request or other hardware-specific
	# action) rather than a host request (such as the QMP command
	# system_reset). (since 2.10)
	#
	# @reason: The @ShutdownCause of the RESET. (since 4.0)
	#
	# Since: 0.12
	#
	# Example:
	#
	# <- { "event": "RESET",
	# "data": { "guest": false, "reason": "guest-reset" },
	# "timestamp": { "seconds": 1267041653, "microseconds": 9518 } }
	##
	{ 'event': 'RESET', 'data': { 'guest': 'bool', 'reason': 'ShutdownCause' } }

	##
	# @STOP:
	#
	# Emitted when the virtual machine is stopped
	#
	# Since: 0.12
	#
	# Example:
	#
	# <- { "event": "STOP",
	# "timestamp": { "seconds": 1267041730, "microseconds": 281295 } }
	##
	{ 'event': 'STOP' }

	##
	# @RESUME:
	#
	# Emitted when the virtual machine resumes execution
	#
	# Since: 0.12
	#
	# Example:
	#
	# <- { "event": "RESUME",
	# "timestamp": { "seconds": 1271770767, "microseconds": 582542 } }
	##
	{ 'event': 'RESUME' }

	##
	# @SUSPEND:
	#
	# Emitted when guest enters a hardware suspension state, for example,
	# S3 state, which is sometimes called standby state
	#
	# Since: 1.1
	#
	# Example:
	#
	# <- { "event": "SUSPEND",
	# "timestamp": { "seconds": 1344456160, "microseconds": 309119 } }
	##
	{ 'event': 'SUSPEND' }

	##
	# @SUSPEND_DISK:
	#
	# Emitted when guest enters a hardware suspension state with data
	# saved on disk, for example, S4 state, which is sometimes called
	# hibernate state
	#
	# Note: QEMU shuts down (similar to event @SHUTDOWN) when entering
	# this state
	#
	# Since: 1.2
	#
	# Example:
	#
	# <- { "event": "SUSPEND_DISK",
	# "timestamp": { "seconds": 1344456160, "microseconds": 309119 } }
	##
	{ 'event': 'SUSPEND_DISK' }

	##
	# @WAKEUP:
	#
	# Emitted when the guest has woken up from suspend state and is
	# running
	#
	# Since: 1.1
	#
	# Example:
	#
	# <- { "event": "WAKEUP",
	# "timestamp": { "seconds": 1344522075, "microseconds": 745528 } }
	##
	{ 'event': 'WAKEUP' }

	##
	# @WATCHDOG:
	#
	# Emitted when the watchdog device's timer is expired
	#
	# @action: action that has been taken
	#
	# Note: If action is "reset", "shutdown", or "pause" the WATCHDOG
	# event is followed respectively by the RESET, SHUTDOWN, or STOP
	# events
	#
	# Note: This event is rate-limited.
	#
	# Since: 0.13
	#
	# Example:
	#
	# <- { "event": "WATCHDOG",
	# "data": { "action": "reset" },
	# "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
	##
	{ 'event': 'WATCHDOG',
	'data': { 'action': 'WatchdogAction' } }

	##
	# @WatchdogAction:
	#
	# An enumeration of the actions taken when the watchdog device's timer
	# is expired
	#
	# @reset: system resets
	#
	# @shutdown: system shutdown, note that it is similar to @powerdown,
	# which tries to set to system status and notify guest
	#
	# @poweroff: system poweroff, the emulator program exits
	#
	# @pause: system pauses, similar to @stop
	#
	# @debug: system enters debug state
	#
	# @none: nothing is done
	#
	# @inject-nmi: a non-maskable interrupt is injected into the first
	# VCPU (all VCPUS on x86) (since 2.4)
	#
	# Since: 2.1
	##
	{ 'enum': 'WatchdogAction',
	'data': [ 'reset', 'shutdown', 'poweroff', 'pause', 'debug', 'none',
	'inject-nmi' ] }

	##
	# @RebootAction:
	#
	# Possible QEMU actions upon guest reboot
	#
	# @reset: Reset the VM
	#
	# @shutdown: Shutdown the VM and exit, according to the shutdown
	# action
	#
	# Since: 6.0
	##
	{ 'enum': 'RebootAction',
	'data': [ 'reset', 'shutdown' ] }

	##
	# @ShutdownAction:
	#
	# Possible QEMU actions upon guest shutdown
	#
	# @poweroff: Shutdown the VM and exit
	#
	# @pause: pause the VM
	#
	# Since: 6.0
	##
	{ 'enum': 'ShutdownAction',
	'data': [ 'poweroff', 'pause' ] }

	##
	# @PanicAction:
	#
	# @none: Continue VM execution
	#
	# @pause: Pause the VM
	#
	# @shutdown: Shutdown the VM and exit, according to the shutdown
	# action
	#
	# @exit-failure: Shutdown the VM and exit with nonzero status (since
	# 7.1)
	#
	# Since: 6.0
	##
	{ 'enum': 'PanicAction',
	'data': [ 'pause', 'shutdown', 'exit-failure', 'none' ] }

	##
	# @watchdog-set-action:
	#
	# Set watchdog action.
	#
	# @action: @WatchdogAction action taken when watchdog timer expires.
	#
	# Since: 2.11
	#
	# Example:
	#
	# -> { "execute": "watchdog-set-action",
	# "arguments": { "action": "inject-nmi" } }
	# <- { "return": {} }
	##
	{ 'command': 'watchdog-set-action', 'data' : {'action': 'WatchdogAction'} }

	##
	# @set-action:
	#
	# Set the actions that will be taken by the emulator in response to
	# guest events.
	#
	# @reboot: @RebootAction action taken on guest reboot.
	#
	# @shutdown: @ShutdownAction action taken on guest shutdown.
	#
	# @panic: @PanicAction action taken on guest panic.
	#
	# @watchdog: @WatchdogAction action taken when watchdog timer expires.
	#
	# Since: 6.0
	#
	# Example:
	#
	# -> { "execute": "set-action",
	# "arguments": { "reboot": "shutdown",
	# "shutdown" : "pause",
	# "panic": "pause",
	# "watchdog": "inject-nmi" } }
	# <- { "return": {} }
	##
	{ 'command': 'set-action',
	'data': { '*reboot': 'RebootAction',
	'*shutdown': 'ShutdownAction',
	'*panic': 'PanicAction',
	'*watchdog': 'WatchdogAction' },
	'allow-preconfig': true }

	##
	# @GUEST_PANICKED:
	#
	# Emitted when guest OS panic is detected
	#
	# @action: action that has been taken, currently always "pause"
	#
	# @info: information about a panic (since 2.9)
	#
	# Since: 1.5
	#
	# Example:
	#
	# <- { "event": "GUEST_PANICKED",
	# "data": { "action": "pause" },
	# "timestamp": { "seconds": 1648245231, "microseconds": 900001 } }
	##
	{ 'event': 'GUEST_PANICKED',
	'data': { 'action': 'GuestPanicAction', '*info': 'GuestPanicInformation' } }

	##
	# @GUEST_CRASHLOADED:
	#
	# Emitted when guest OS crash loaded is detected
	#
	# @action: action that has been taken, currently always "run"
	#
	# @info: information about a panic
	#
	# Since: 5.0
	#
	# Example:
	#
	# <- { "event": "GUEST_CRASHLOADED",
	# "data": { "action": "run" },
	# "timestamp": { "seconds": 1648245259, "microseconds": 893771 } }
	##
	{ 'event': 'GUEST_CRASHLOADED',
	'data': { 'action': 'GuestPanicAction', '*info': 'GuestPanicInformation' } }

	##
	# @GuestPanicAction:
	#
	# An enumeration of the actions taken when guest OS panic is detected
	#
	# @pause: system pauses
	#
	# @poweroff: system powers off (since 2.8)
	#
	# @run: system continues to run (since 5.0)
	#
	# Since: 2.1
	##
	{ 'enum': 'GuestPanicAction',
	'data': [ 'pause', 'poweroff', 'run' ] }

	##
	# @GuestPanicInformationType:
	#
	# An enumeration of the guest panic information types
	#
	# @hyper-v: hyper-v guest panic information type
	#
	# @s390: s390 guest panic information type (Since: 2.12)
	#
	# Since: 2.9
	##
	{ 'enum': 'GuestPanicInformationType',
	'data': [ 'hyper-v', 's390' ] }

	##
	# @GuestPanicInformation:
	#
	# Information about a guest panic
	#
	# @type: Crash type that defines the hypervisor specific information
	#
	# Since: 2.9
	##
	{'union': 'GuestPanicInformation',
	'base': {'type': 'GuestPanicInformationType'},
	'discriminator': 'type',
	'data': {'hyper-v': 'GuestPanicInformationHyperV',
	's390': 'GuestPanicInformationS390'}}

	##
	# @GuestPanicInformationHyperV:
	#
	# Hyper-V specific guest panic information (HV crash MSRs)
	#
	# @arg1: for Windows, STOP code for the guest crash. For Linux,
	# an error code.
	#
	# @arg2: for Windows, first argument of the STOP. For Linux, the
	# guest OS ID, which has the kernel version in bits 16-47
	# and 0x8100 in bits 48-63.
	#
	# @arg3: for Windows, second argument of the STOP. For Linux, the
	# program counter of the guest.
	#
	# @arg4: for Windows, third argument of the STOP. For Linux, the
	# RAX register (x86) or the stack pointer (aarch64) of the guest.
	#
	# @arg5: for Windows, fourth argument of the STOP. For x86 Linux, the
	# stack pointer of the guest.
	#
	# Since: 2.9
	##
	{'struct': 'GuestPanicInformationHyperV',
	'data': {'arg1': 'uint64',
	'arg2': 'uint64',
	'arg3': 'uint64',
	'arg4': 'uint64',
	'arg5': 'uint64'}}

	##
	# @S390CrashReason:
	#
	# Reason why the CPU is in a crashed state.
	#
	# @unknown: no crash reason was set
	#
	# @disabled-wait: the CPU has entered a disabled wait state
	#
	# @extint-loop: clock comparator or cpu timer interrupt with new PSW
	# enabled for external interrupts
	#
	# @pgmint-loop: program interrupt with BAD new PSW
	#
	# @opint-loop: operation exception interrupt with invalid code at the
	# program interrupt new PSW
	#
	# Since: 2.12
	##
	{ 'enum': 'S390CrashReason',
	'data': [ 'unknown',
	'disabled-wait',
	'extint-loop',
	'pgmint-loop',
	'opint-loop' ] }

	##
	# @GuestPanicInformationS390:
	#
	# S390 specific guest panic information (PSW)
	#
	# @core: core id of the CPU that crashed
	#
	# @psw-mask: control fields of guest PSW
	#
	# @psw-addr: guest instruction address
	#
	# @reason: guest crash reason
	#
	# Since: 2.12
	##
	{'struct': 'GuestPanicInformationS390',
	'data': {'core': 'uint32',
	'psw-mask': 'uint64',
	'psw-addr': 'uint64',
	'reason': 'S390CrashReason'}}

	##
	# @MEMORY_FAILURE:
	#
	# Emitted when a memory failure occurs on host side.
	#
	# @recipient: recipient is defined as @MemoryFailureRecipient.
	#
	# @action: action that has been taken.
	#
	# @flags: flags for MemoryFailureAction.
	#
	# Since: 5.2
	#
	# Example:
	#
	# <- { "event": "MEMORY_FAILURE",
	# "data": { "recipient": "hypervisor",
	# "action": "fatal",
	# "flags": { "action-required": false,
	# "recursive": false } },
	# "timestamp": { "seconds": 1267061043, "microseconds": 959568 } }
	##
	{ 'event': 'MEMORY_FAILURE',
	'data': { 'recipient': 'MemoryFailureRecipient',
	'action': 'MemoryFailureAction',
	'flags': 'MemoryFailureFlags'} }

	##
	# @MemoryFailureRecipient:
	#
	# Hardware memory failure occurs, handled by recipient.
	#
	# @hypervisor: memory failure at QEMU process address space. (none
	# guest memory, but used by QEMU itself).
	#
	# @guest: memory failure at guest memory,
	#
	# Since: 5.2
	##
	{ 'enum': 'MemoryFailureRecipient',
	'data': [ 'hypervisor',
	'guest' ] }

	##
	# @MemoryFailureAction:
	#
	# Actions taken by QEMU in response to a hardware memory failure.
	#
	# @ignore: the memory failure could be ignored. This will only be the
	# case for action-optional failures.
	#
	# @inject: memory failure occurred in guest memory, the guest enabled
	# MCE handling mechanism, and QEMU could inject the MCE into the
	# guest successfully.
	#
	# @fatal: the failure is unrecoverable. This occurs for
	# action-required failures if the recipient is the hypervisor;
	# QEMU will exit.
	#
	# @reset: the failure is unrecoverable but confined to the guest.
	# This occurs if the recipient is a guest guest which is not ready
	# to handle memory failures.
	#
	# Since: 5.2
	##
	{ 'enum': 'MemoryFailureAction',
	'data': [ 'ignore',
	'inject',
	'fatal',
	'reset' ] }

	##
	# @MemoryFailureFlags:
	#
	# Additional information on memory failures.
	#
	# @action-required: whether a memory failure event is action-required
	# or action-optional (e.g. a failure during memory scrub).
	#
	# @recursive: whether the failure occurred while the previous failure
	# was still in progress.
	#
	# Since: 5.2
	##
	{ 'struct': 'MemoryFailureFlags',
	'data': { 'action-required': 'bool',
	'recursive': 'bool'} }

	##
	# @NotifyVmexitOption:
	#
	# An enumeration of the options specified when enabling notify VM exit
	#
	# @run: enable the feature, do nothing and continue if the notify VM
	# exit happens.
	#
	# @internal-error: enable the feature, raise a internal error if the
	# notify VM exit happens.
	#
	# @disable: disable the feature.
	#
	# Since: 7.2
	##
	{ 'enum': 'NotifyVmexitOption',
	'data': [ 'run', 'internal-error', 'disable' ] }