Google Git
Sign in
qemu / qemu / b887b6b71c0008413314e2b5e7d691f4812776f3 / . / hw / pci-host / astro.c
blob: e3e589ceacc4f1a45a74caf544809ca5ec73661e [file] [log] [blame]
/*
* HP-PARISC Astro/Pluto/Ike/REO system bus adapter (SBA)
* with Elroy PCI bus (LBA) adapter emulation
* Found in C3000 and similar machines
*
* (C) 2023 by Helge Deller <deller@gmx.de>
*
* This work is licensed under the GNU GPL license version 2 or later.
*
* Chip documentation is available at:
* https://parisc.wiki.kernel.org/index.php/Technical_Documentation
*
* TODO:
* - All user-added devices are currently attached to the first
* Elroy (PCI bus) only for now. To fix this additional work in
* SeaBIOS and this driver is needed. See "user_creatable" flag below.
* - GMMIO (Greater than 4 GB MMIO) register
*/
#define TYPE_ASTRO_IOMMU_MEMORY_REGION "astro-iommu-memory-region"
#define F_EXTEND(addr) ((addr) | MAKE_64BIT_MASK(32, 32))
#include "qemu/osdep.h"
#include "qemu/module.h"
#include "qemu/units.h"
#include "qapi/error.h"
#include "hw/irq.h"
#include "hw/pci/pci_device.h"
#include "hw/pci/pci_bus.h"
#include "hw/qdev-properties.h"
#include "hw/pci-host/astro.h"
#include "hw/hppa/hppa_hardware.h"
#include "migration/vmstate.h"
#include "target/hppa/cpu.h"
#include "trace.h"
#include "qom/object.h"
/*
* Helper functions
*/
static uint64_t mask_32bit_val(hwaddr addr, unsigned size, uint64_t val)
{
if (size == 8) {
return val;
}
if (addr & 4) {
val >>= 32;
} else {
val = (uint32_t) val;
}
return val;
}
static void put_val_in_int64(uint64_t *p, hwaddr addr, unsigned size,
uint64_t val)
{
if (size == 8) {
*p = val;
} else if (size == 4) {
if (addr & 4) {
*p = ((*p << 32) >> 32) | (val << 32);
} else {
*p = ((*p >> 32) << 32) | (uint32_t) val;
}
}
}
static void put_val_in_arrary(uint64_t *array, hwaddr start_addr,
hwaddr addr, unsigned size, uint64_t val)
{
int index;
index = (addr - start_addr) / 8;
put_val_in_int64(&array[index], addr, size, val);
}
/*
* The Elroy PCI host bridge. We have at least 4 of those under Astro.
*/
static MemTxResult elroy_chip_read_with_attrs(void *opaque, hwaddr addr,
uint64_t *data, unsigned size,
MemTxAttrs attrs)
{
MemTxResult ret = MEMTX_OK;
ElroyState *s = opaque;
uint64_t val = -1;
int index;
switch ((addr >> 3) << 3) {
case 0x0008:
val = 0x6000005; /* func_class */
break;
case 0x0058:
/*
* Scratch register, but firmware initializes it with the
* PCI BUS number and Linux/HP-UX uses it then.
*/
val = s->pci_bus_num;
/* Upper byte holds the end of this bus number */
val |= s->pci_bus_num << 8;
break;
case 0x0080:
val = s->arb_mask; /* set ARB mask */
break;
case 0x0108:
val = s->status_control;
break;
case 0x200 ... 0x250 - 1: /* LMMIO, GMMIO, WLMMIO, WGMMIO, ... */
index = (addr - 0x200) / 8;
val = s->mmio_base[index];
break;
case 0x0680:
val = s->error_config;
break;
case 0x0688:
val = 0; /* ERROR_STATUS */
break;
case 0x0800: /* IOSAPIC_REG_SELECT */
val = s->iosapic_reg_select;
break;
case 0x0810: /* IOSAPIC_REG_WINDOW */
switch (s->iosapic_reg_select) {
case 0x01: /* IOSAPIC_REG_VERSION */
val = (32 << 16) | 1; /* upper 16bit holds max entries */
break;
default:
if (s->iosapic_reg_select < ARRAY_SIZE(s->iosapic_reg)) {
val = s->iosapic_reg[s->iosapic_reg_select];
} else {
goto check_hf;
}
}
trace_iosapic_reg_read(s->iosapic_reg_select, size, val);
break;
default:
check_hf:
if (s->status_control & HF_ENABLE) {
val = 0;
ret = MEMTX_DECODE_ERROR;
} else {
/* return -1ULL if HardFail is disabled */
val = ~0;
ret = MEMTX_OK;
}
}
trace_elroy_read(addr, size, val);
/* for 32-bit accesses mask return value */
val = mask_32bit_val(addr, size, val);
trace_astro_chip_read(addr, size, val);
*data = val;
return ret;
}
static MemTxResult elroy_chip_write_with_attrs(void *opaque, hwaddr addr,
uint64_t val, unsigned size,
MemTxAttrs attrs)
{
ElroyState *s = opaque;
int i;
trace_elroy_write(addr, size, val);
switch ((addr >> 3) << 3) {
case 0x000: /* PCI_ID & PCI_COMMAND_STATUS_REG */
break;
case 0x080:
put_val_in_int64(&s->arb_mask, addr, size, val);
break;
case 0x0108:
put_val_in_int64(&s->status_control, addr, size, val);
break;
case 0x200 ... 0x250 - 1: /* LMMIO, GMMIO, WLMMIO, WGMMIO, ... */
put_val_in_arrary(s->mmio_base, 0x200, addr, size, val);
break;
case 0x300: /* ibase */
case 0x308: /* imask */
break;
case 0x0680:
put_val_in_int64(&s->error_config, addr, size, val);
break;
case 0x0800: /* IOSAPIC_REG_SELECT */
s->iosapic_reg_select = val;
break;
case 0x0810: /* IOSAPIC_REG_WINDOW */
trace_iosapic_reg_write(s->iosapic_reg_select, size, val);
if (s->iosapic_reg_select < ARRAY_SIZE(s->iosapic_reg)) {
s->iosapic_reg[s->iosapic_reg_select] = val;
} else {
goto check_hf;
}
break;
case 0x0840: /* IOSAPIC_REG_EOI */
val = le64_to_cpu(val);
val &= 63;
for (i = 0; i < ELROY_IRQS; i++) {
if ((s->iosapic_reg[0x10 + 2 * i] & 63) == val) {
s->ilr &= ~(1ull << i);
}
}
break;
default:
check_hf:
if (s->status_control & HF_ENABLE) {
return MEMTX_DECODE_ERROR;
}
}
return MEMTX_OK;
}
static const MemoryRegionOps elroy_chip_ops = {
.read_with_attrs = elroy_chip_read_with_attrs,
.write_with_attrs = elroy_chip_write_with_attrs,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 8,
},
.impl = {
.min_access_size = 4,
.max_access_size = 8,
},
};
/* Unlike pci_config_data_le_ops, no check of high bit set in config_reg. */
static uint64_t elroy_config_data_read(void *opaque, hwaddr addr, unsigned len)
{
uint64_t val;
PCIHostState *s = opaque;
val = pci_data_read(s->bus, s->config_reg | (addr & 3), len);
trace_elroy_pci_config_data_read(s->config_reg | (addr & 3), len, val);
return val;
}
static void elroy_config_data_write(void *opaque, hwaddr addr,
uint64_t val, unsigned len)
{
PCIHostState *s = opaque;
pci_data_write(s->bus, s->config_reg | (addr & 3), val, len);
trace_elroy_pci_config_data_write(s->config_reg | (addr & 3), len, val);
}
static const MemoryRegionOps elroy_config_data_ops = {
.read = elroy_config_data_read,
.write = elroy_config_data_write,
.endianness = DEVICE_LITTLE_ENDIAN,
};
static uint64_t elroy_config_addr_read(void *opaque, hwaddr addr, unsigned len)
{
ElroyState *s = opaque;
return s->config_reg_elroy;
}
static void elroy_config_addr_write(void *opaque, hwaddr addr,
uint64_t val, unsigned len)
{
PCIHostState *s = opaque;
ElroyState *es = opaque;
es->config_reg_elroy = val; /* keep a copy of original value */
s->config_reg = val;
}
static const MemoryRegionOps elroy_config_addr_ops = {
.read = elroy_config_addr_read,
.write = elroy_config_addr_write,
.valid.min_access_size = 4,
.valid.max_access_size = 8,
.endianness = DEVICE_LITTLE_ENDIAN,
};
/* Handle PCI-to-system address translation. */
static IOMMUTLBEntry astro_translate_iommu(IOMMUMemoryRegion *iommu,
hwaddr addr,
IOMMUAccessFlags flag,
int iommu_idx)
{
AstroState *s = container_of(iommu, AstroState, iommu);
hwaddr pdir_ptr, index, ibase;
hwaddr addr_mask = 0xfff; /* 4k translation */
uint64_t entry;
#define IOVP_SHIFT 12 /* equals PAGE_SHIFT */
#define PDIR_INDEX(iovp) ((iovp) >> IOVP_SHIFT)
#define SBA_PDIR_VALID_BIT 0x8000000000000000ULL
addr &= ~addr_mask;
/*
* Default translation: "32-bit PCI Addressing on 40-bit Runway".
* For addresses in the 32-bit memory address range ... and then
* language which not-coincidentally matches the PSW.W=0 mapping.
*/
if (addr <= UINT32_MAX) {
entry = hppa_abs_to_phys_pa2_w0(addr);
} else {
entry = addr;
}
/* "range enable" flag cleared? */
if ((s->tlb_ibase & 1) == 0) {
goto skip;
}
ibase = s->tlb_ibase & ~1ULL;
if ((addr & s->tlb_imask) != ibase) {
/* do not translate this one! */
goto skip;
}
index = PDIR_INDEX(addr);
pdir_ptr = s->tlb_pdir_base + index * sizeof(entry);
entry = ldq_le_phys(&address_space_memory, pdir_ptr);
if (!(entry & SBA_PDIR_VALID_BIT)) { /* I/O PDIR entry valid ? */
/* failure */
return (IOMMUTLBEntry) { .perm = IOMMU_NONE };
}
entry &= ~SBA_PDIR_VALID_BIT;
entry >>= IOVP_SHIFT;
entry <<= 12;
skip:
return (IOMMUTLBEntry) {
.target_as = &address_space_memory,
.iova = addr,
.translated_addr = entry,
.addr_mask = addr_mask,
.perm = IOMMU_RW,
};
}
static AddressSpace *elroy_pcihost_set_iommu(PCIBus *bus, void *opaque,
int devfn)
{
ElroyState *s = opaque;
return &s->astro->iommu_as;
}
static const PCIIOMMUOps elroy_pcihost_iommu_ops = {
.get_address_space = elroy_pcihost_set_iommu,
};
/*
* Encoding in IOSAPIC:
* base_addr == 0xfffa0000, we want to get 0xa0ff0000.
* eid 0x0ff00000 -> 0x00ff0000
* id 0x000ff000 -> 0xff000000
*/
#define SWIZZLE_HPA(a) \
((((a) & 0x0ff00000) >> 4) | (((a) & 0x000ff000) << 12))
#define UNSWIZZLE_HPA(a) \
(((((a) << 4) & 0x0ff00000) | (((a) >> 12) & 0x000ff000) | 0xf0000000))
/* bits in the "low" I/O Sapic IRdT entry */
#define IOSAPIC_IRDT_DISABLE 0x10000 /* if bit is set, mask this irq */
#define IOSAPIC_IRDT_PO_LOW 0x02000
#define IOSAPIC_IRDT_LEVEL_TRIG 0x08000
#define IOSAPIC_IRDT_MODE_LPRI 0x00100
#define CPU_IRQ_OFFSET 2
static void elroy_set_irq(void *opaque, int irq, int level)
{
ElroyState *s = opaque;
uint32_t bit;
uint32_t old_ilr = s->ilr;
hwaddr cpu_hpa;
uint32_t val;
val = s->iosapic_reg[0x10 + 2 * irq];
cpu_hpa = s->iosapic_reg[0x11 + 2 * irq];
/* low nibble of val has value to write into CPU irq reg */
bit = 1u << (val & (ELROY_IRQS - 1));
cpu_hpa = UNSWIZZLE_HPA(cpu_hpa);
if (level && (!(val & IOSAPIC_IRDT_DISABLE)) && cpu_hpa) {
uint32_t ena = bit & ~old_ilr;
s->ilr = old_ilr | bit;
if (ena != 0) {
stl_be_phys(&address_space_memory, F_EXTEND(cpu_hpa), val & 63);
}
} else {
s->ilr = old_ilr & ~bit;
}
}
static int elroy_pci_map_irq(PCIDevice *d, int irq_num)
{
int slot = PCI_SLOT(d->devfn);
assert(irq_num >= 0 && irq_num < ELROY_IRQS);
return slot & (ELROY_IRQS - 1);
}
static void elroy_reset(DeviceState *dev)
{
ElroyState *s = ELROY_PCI_HOST_BRIDGE(dev);
int irq;
/*
* Make sure to disable interrupts at reboot, otherwise the Linux kernel
* serial8250_config_port() in drivers/tty/serial/8250/8250_port.c
* will hang during autoconfig().
*/
s->ilr = 0;
for (irq = 0; irq < ELROY_IRQS; irq++) {
s->iosapic_reg[0x10 + 2 * irq] = IOSAPIC_IRDT_PO_LOW |
IOSAPIC_IRDT_LEVEL_TRIG | (irq + CPU_IRQ_OFFSET) |
IOSAPIC_IRDT_DISABLE;
s->iosapic_reg[0x11 + 2 * irq] = SWIZZLE_HPA(CPU_HPA);
}
}
static void elroy_pcihost_init(Object *obj)
{
ElroyState *s = ELROY_PCI_HOST_BRIDGE(obj);
PCIHostState *phb = PCI_HOST_BRIDGE(obj);
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
/* Elroy config access from CPU. */
memory_region_init_io(&s->this_mem, OBJECT(s), &elroy_chip_ops,
s, "elroy", 0x2000);
/* Elroy PCI config. */
memory_region_init_io(&phb->conf_mem, OBJECT(phb),
&elroy_config_addr_ops, DEVICE(s),
"pci-conf-idx", 8);
memory_region_init_io(&phb->data_mem, OBJECT(phb),
&elroy_config_data_ops, DEVICE(s),
"pci-conf-data", 8);
memory_region_add_subregion(&s->this_mem, 0x40,
&phb->conf_mem);
memory_region_add_subregion(&s->this_mem, 0x48,
&phb->data_mem);
/* Elroy PCI bus memory. */
memory_region_init(&s->pci_mmio, OBJECT(s), "pci-mmio", UINT64_MAX);
memory_region_init_io(&s->pci_io, OBJECT(s), &unassigned_io_ops, obj,
"pci-isa-mmio",
((uint32_t) IOS_DIST_BASE_SIZE) / ROPES_PER_IOC);
phb->bus = pci_register_root_bus(DEVICE(s), "pci",
elroy_set_irq, elroy_pci_map_irq, s,
&s->pci_mmio, &s->pci_io,
PCI_DEVFN(0, 0), ELROY_IRQS, TYPE_PCI_BUS);
sysbus_init_mmio(sbd, &s->this_mem);
qdev_init_gpio_in(DEVICE(obj), elroy_set_irq, ELROY_IRQS);
}
static Property elroy_pcihost_properties[] = {
DEFINE_PROP_END_OF_LIST(),
};
static const VMStateDescription vmstate_elroy = {
.name = "Elroy",
.version_id = 1,
.minimum_version_id = 1,
.fields = (const VMStateField[]) {
VMSTATE_UINT64(hpa, ElroyState),
VMSTATE_UINT32(pci_bus_num, ElroyState),
VMSTATE_UINT64(config_address, ElroyState),
VMSTATE_UINT64(config_reg_elroy, ElroyState),
VMSTATE_UINT64(status_control, ElroyState),
VMSTATE_UINT64(arb_mask, ElroyState),
VMSTATE_UINT64_ARRAY(mmio_base, ElroyState, (0x0250 - 0x200) / 8),
VMSTATE_UINT64(error_config, ElroyState),
VMSTATE_UINT32(iosapic_reg_select, ElroyState),
VMSTATE_UINT64_ARRAY(iosapic_reg, ElroyState, 0x20),
VMSTATE_UINT32(ilr, ElroyState),
VMSTATE_END_OF_LIST()
}
};
static void elroy_pcihost_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->reset = elroy_reset;
device_class_set_props(dc, elroy_pcihost_properties);
dc->vmsd = &vmstate_elroy;
dc->user_creatable = false;
}
static const TypeInfo elroy_pcihost_info = {
.name = TYPE_ELROY_PCI_HOST_BRIDGE,
.parent = TYPE_PCI_HOST_BRIDGE,
.instance_init = elroy_pcihost_init,
.instance_size = sizeof(ElroyState),
.class_init = elroy_pcihost_class_init,
};
static void elroy_register_types(void)
{
type_register_static(&elroy_pcihost_info);
}
type_init(elroy_register_types)
static ElroyState *elroy_init(int num)
{
DeviceState *dev;
dev = qdev_new(TYPE_ELROY_PCI_HOST_BRIDGE);
dev->id = g_strdup_printf("elroy%d", num);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
return ELROY_PCI_HOST_BRIDGE(dev);
}
/*
* Astro Runway chip.
*/
static MemTxResult astro_chip_read_with_attrs(void *opaque, hwaddr addr,
uint64_t *data, unsigned size,
MemTxAttrs attrs)
{
AstroState *s = opaque;
MemTxResult ret = MEMTX_OK;
uint64_t val = -1;
int index;
switch ((addr >> 3) << 3) {
/* R2I registers */
case 0x0000: /* ID */
val = (0x01 << 3) | 0x01ULL;
break;
case 0x0008: /* IOC_CTRL */
val = s->ioc_ctrl;
break;
case 0x0010: /* TOC_CLIENT_ID */
break;
case 0x0030: /* HP-UX 10.20 and 11.11 reads it. No idea. */
val = -1;
break;
case 0x0078: /* NetBSD reads 0x78 ? */
val = -1;
break;
case 0x0300 ... 0x03d8: /* LMMIO_DIRECT0_BASE... */
index = (addr - 0x300) / 8;
val = s->ioc_ranges[index];
break;
case 0x10200:
val = 0;
break;
case 0x10220:
case 0x10230: /* HP-UX 11.11 reads it. No idea. */
val = -1;
break;
case 0x22108: /* IOC STATUS_CONTROL */
val = s->ioc_status_ctrl;
break;
case 0x20200 ... 0x20240 - 1: /* IOC Rope0_Control ... */
index = (addr - 0x20200) / 8;
val = s->ioc_rope_control[index];
break;
case 0x20040: /* IOC Rope config */
val = s->ioc_rope_config;
break;
case 0x20050: /* IOC Rope debug */
val = 0;
break;
case 0x20108: /* IOC STATUS_CONTROL */
val = s->ioc_status_control;
break;
case 0x20310: /* IOC_PCOM */
val = s->tlb_pcom;
/* TODO: flush iommu */
break;
case 0x20400:
val = s->ioc_flush_control;
break;
/* empty placeholders for non-existent elroys */
#define EMPTY_PORT(x) case x: case x+8: val = 0; break; \
case x+40: case x+48: val = UINT64_MAX; break;
EMPTY_PORT(0x30000)
EMPTY_PORT(0x32000)
EMPTY_PORT(0x34000)
EMPTY_PORT(0x36000)
EMPTY_PORT(0x38000)
EMPTY_PORT(0x3a000)
EMPTY_PORT(0x3c000)
EMPTY_PORT(0x3e000)
#undef EMPTY_PORT
default:
val = 0;
ret = MEMTX_DECODE_ERROR;
}
/* for 32-bit accesses mask return value */
val = mask_32bit_val(addr, size, val);
trace_astro_chip_read(addr, size, val);
*data = val;
return ret;
}
static MemTxResult astro_chip_write_with_attrs(void *opaque, hwaddr addr,
uint64_t val, unsigned size,
MemTxAttrs attrs)
{
MemTxResult ret = MEMTX_OK;
AstroState *s = opaque;
trace_astro_chip_write(addr, size, val);
switch ((addr >> 3) << 3) {
case 0x0000: /* ID */
break;
case 0x0008: /* IOC_CTRL */
val &= 0x0ffffff;
put_val_in_int64(&s->ioc_ctrl, addr, size, val);
break;
case 0x0010: /* TOC_CLIENT_ID */
break;
case 0x0030: /* HP-UX 10.20 and 11.11 reads it. No idea. */
break;
case 0x0300 ... 0x03d8 - 1: /* LMMIO_DIRECT0_BASE... */
put_val_in_arrary(s->ioc_ranges, 0x300, addr, size, val);
break;
case 0x10200:
case 0x10220:
case 0x10230: /* HP-UX 11.11 reads it. No idea. */
break;
case 0x20200 ... 0x20240 - 1: /* IOC Rope0_Control ... */
put_val_in_arrary(s->ioc_rope_control, 0x20200, addr, size, val);
break;
case 0x20040: /* IOC Rope config */
case 0x22040:
put_val_in_int64(&s->ioc_rope_config, addr, size, val);
break;
case 0x20300:
case 0x22300:
put_val_in_int64(&s->tlb_ibase, addr, size, val);
break;
case 0x20308:
case 0x22308:
put_val_in_int64(&s->tlb_imask, addr, size, val);
break;
case 0x20310:
case 0x22310:
put_val_in_int64(&s->tlb_pcom, addr, size, val);
/* TODO: flush iommu */
break;
case 0x20318:
case 0x22318:
put_val_in_int64(&s->tlb_tcnfg, addr, size, val);
break;
case 0x20320:
case 0x22320:
put_val_in_int64(&s->tlb_pdir_base, addr, size, val);
break;
case 0x22000: /* func_id */
break;
case 0x22008: /* func_class */
break;
case 0x22050: /* rope_debug */
break;
case 0x22108: /* IOC STATUS_CONTROL */
put_val_in_int64(&s->ioc_status_ctrl, addr, size, val);
break;
/*
* empty placeholders for non-existent elroys, e.g.
* func_class, pci config & data
*/
#define EMPTY_PORT(x) case x: case x+8: case x+0x40: case x+0x48:
EMPTY_PORT(0x30000)
EMPTY_PORT(0x32000)
EMPTY_PORT(0x34000)
EMPTY_PORT(0x36000)
EMPTY_PORT(0x38000)
EMPTY_PORT(0x3a000)
EMPTY_PORT(0x3c000)
EMPTY_PORT(0x3e000)
break;
#undef EMPTY_PORT
default:
ret = MEMTX_DECODE_ERROR;
}
return ret;
}
static const MemoryRegionOps astro_chip_ops = {
.read_with_attrs = astro_chip_read_with_attrs,
.write_with_attrs = astro_chip_write_with_attrs,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid = {
.min_access_size = 4,
.max_access_size = 8,
},
.impl = {
.min_access_size = 4,
.max_access_size = 8,
},
};
static const VMStateDescription vmstate_astro = {
.name = "Astro",
.version_id = 1,
.minimum_version_id = 1,
.fields = (const VMStateField[]) {
VMSTATE_UINT64(ioc_ctrl, AstroState),
VMSTATE_UINT64(ioc_status_ctrl, AstroState),
VMSTATE_UINT64_ARRAY(ioc_ranges, AstroState, (0x03d8 - 0x300) / 8),
VMSTATE_UINT64(ioc_rope_config, AstroState),
VMSTATE_UINT64(ioc_status_control, AstroState),
VMSTATE_UINT64(ioc_flush_control, AstroState),
VMSTATE_UINT64_ARRAY(ioc_rope_control, AstroState, 8),
VMSTATE_UINT64(tlb_ibase, AstroState),
VMSTATE_UINT64(tlb_imask, AstroState),
VMSTATE_UINT64(tlb_pcom, AstroState),
VMSTATE_UINT64(tlb_tcnfg, AstroState),
VMSTATE_UINT64(tlb_pdir_base, AstroState),
VMSTATE_END_OF_LIST()
}
};
static void astro_reset(DeviceState *dev)
{
AstroState *s = ASTRO_CHIP(dev);
int i;
s->ioc_ctrl = 0x29cf;
s->ioc_rope_config = 0xc5f;
s->ioc_flush_control = 0xb03;
s->ioc_status_control = 0;
memset(&s->ioc_rope_control, 0, sizeof(s->ioc_rope_control));
/*
* The SBA BASE/MASK registers control CPU -> IO routing.
* The LBA BASE/MASK registers control IO -> System routing (in Elroy)
*/
memset(&s->ioc_ranges, 0, sizeof(s->ioc_ranges));
s->ioc_ranges[(0x360 - 0x300) / 8] = LMMIO_DIST_BASE_ADDR | 0x01; /* LMMIO_DIST_BASE (SBA) */
s->ioc_ranges[(0x368 - 0x300) / 8] = 0xfc000000; /* LMMIO_DIST_MASK */
s->ioc_ranges[(0x370 - 0x300) / 8] = 0; /* LMMIO_DIST_ROUTE */
s->ioc_ranges[(0x390 - 0x300) / 8] = IOS_DIST_BASE_ADDR | 0x01; /* IOS_DIST_BASE */
s->ioc_ranges[(0x398 - 0x300) / 8] = 0xffffff0000; /* IOS_DIST_MASK */
s->ioc_ranges[(0x3a0 - 0x300) / 8] = 0x3400000000000000ULL; /* IOS_DIST_ROUTE */
s->ioc_ranges[(0x3c0 - 0x300) / 8] = 0xfffee00000; /* IOS_DIRECT_BASE */
s->ioc_ranges[(0x3c8 - 0x300) / 8] = 0xffffff0000; /* IOS_DIRECT_MASK */
s->ioc_ranges[(0x3d0 - 0x300) / 8] = 0x0; /* IOS_DIRECT_ROUTE */
s->tlb_ibase = 0;
s->tlb_imask = 0;
s->tlb_pcom = 0;
s->tlb_tcnfg = 0;
s->tlb_pdir_base = 0;
for (i = 0; i < ELROY_NUM; i++) {
elroy_reset(DEVICE(s->elroy[i]));
}
}
static void astro_init(Object *obj)
{
}
static void astro_realize(DeviceState *obj, Error **errp)
{
AstroState *s = ASTRO_CHIP(obj);
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
int i;
memory_region_init_io(&s->this_mem, OBJECT(s), &astro_chip_ops,
s, "astro", 0x40000);
sysbus_init_mmio(sbd, &s->this_mem);
/* Host memory as seen from Elroys PCI side, via the IOMMU. */
memory_region_init_iommu(&s->iommu, sizeof(s->iommu),
TYPE_ASTRO_IOMMU_MEMORY_REGION, OBJECT(s),
"iommu-astro", UINT64_MAX);
address_space_init(&s->iommu_as, MEMORY_REGION(&s->iommu),
"bm-pci");
/* Create Elroys (PCI host bus chips). */
for (i = 0; i < ELROY_NUM; i++) {
static const int elroy_hpa_offsets[ELROY_NUM] = {
0x30000, 0x32000, 0x38000, 0x3c000 };
static const char elroy_rope_nr[ELROY_NUM] = {
0, 1, 4, 6 }; /* busnum path, e.g. [10:6] */
int addr_offset;
ElroyState *elroy;
hwaddr map_addr;
uint64_t map_size;
int rope;
addr_offset = elroy_hpa_offsets[i];
rope = elroy_rope_nr[i];
elroy = elroy_init(i);
s->elroy[i] = elroy;
elroy->hpa = ASTRO_HPA + addr_offset;
elroy->pci_bus_num = i;
elroy->astro = s;
/*
* NOTE: we only allow PCI devices on first Elroy for now.
* SeaBIOS will not find devices on the other busses.
*/
if (i > 0) {
qbus_mark_full(&PCI_HOST_BRIDGE(elroy)->bus->qbus);
}
/* map elroy config addresses into Astro space */
memory_region_add_subregion(&s->this_mem, addr_offset,
&elroy->this_mem);
/* LMMIO */
elroy->mmio_base[(0x0200 - 0x200) / 8] = 0xf0000001;
elroy->mmio_base[(0x0208 - 0x200) / 8] = 0xf8000000;
/* GMMIO */
elroy->mmio_base[(0x0210 - 0x200) / 8] = 0x000000f800000001;
elroy->mmio_base[(0x0218 - 0x200) / 8] = 0x000000ff80000000;
/* WLMMIO */
elroy->mmio_base[(0x0220 - 0x200) / 8] = 0xf0000001;
elroy->mmio_base[(0x0228 - 0x200) / 8] = 0xf0000000;
/* WGMMIO */
elroy->mmio_base[(0x0230 - 0x200) / 8] = 0x000000f800000001;
elroy->mmio_base[(0x0238 - 0x200) / 8] = 0x000000fc00000000;
/* IOS_BASE */
map_size = IOS_DIST_BASE_SIZE / ROPES_PER_IOC;
elroy->mmio_base[(0x0240 - 0x200) / 8] = rope * map_size | 0x01;
elroy->mmio_base[(0x0248 - 0x200) / 8] = 0x0000e000;
/* map elroys mmio */
map_size = LMMIO_DIST_BASE_SIZE / ROPES_PER_IOC;
map_addr = F_EXTEND(LMMIO_DIST_BASE_ADDR + rope * map_size);
memory_region_init_alias(&elroy->pci_mmio_alias, OBJECT(elroy),
"pci-mmio-alias",
&elroy->pci_mmio, (uint32_t) map_addr, map_size);
memory_region_add_subregion(get_system_memory(), map_addr,
&elroy->pci_mmio_alias);
/* map elroys io */
map_size = IOS_DIST_BASE_SIZE / ROPES_PER_IOC;
map_addr = F_EXTEND(IOS_DIST_BASE_ADDR + rope * map_size);
memory_region_add_subregion(get_system_memory(), map_addr,
&elroy->pci_io);
/* Host memory as seen from the PCI side, via the IOMMU. */
pci_setup_iommu(PCI_HOST_BRIDGE(elroy)->bus, &elroy_pcihost_iommu_ops,
elroy);
}
}
static void astro_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->reset = astro_reset;
dc->vmsd = &vmstate_astro;
dc->realize = astro_realize;
/*
* astro with elroys are hard part of the newer PA2.0 machines and can not
* be created without that hardware
*/
dc->user_creatable = false;
}
static const TypeInfo astro_chip_info = {
.name = TYPE_ASTRO_CHIP,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_init = astro_init,
.instance_size = sizeof(AstroState),
.class_init = astro_class_init,
};
static void astro_iommu_memory_region_class_init(ObjectClass *klass,
void *data)
{
IOMMUMemoryRegionClass *imrc = IOMMU_MEMORY_REGION_CLASS(klass);
imrc->translate = astro_translate_iommu;
}
static const TypeInfo astro_iommu_memory_region_info = {
.parent = TYPE_IOMMU_MEMORY_REGION,
.name = TYPE_ASTRO_IOMMU_MEMORY_REGION,
.class_init = astro_iommu_memory_region_class_init,
};
static void astro_register_types(void)
{
type_register_static(&astro_chip_info);
type_register_static(&astro_iommu_memory_region_info);
}
type_init(astro_register_types)