|  | /* | 
|  | * qtest I440FX test case | 
|  | * | 
|  | * Copyright IBM, Corp. 2012-2013 | 
|  | * Copyright Red Hat, Inc. 2013 | 
|  | * | 
|  | * Authors: | 
|  | *  Anthony Liguori   <aliguori@us.ibm.com> | 
|  | *  Laszlo Ersek      <lersek@redhat.com> | 
|  | * | 
|  | * This work is licensed under the terms of the GNU GPL, version 2 or later. | 
|  | * See the COPYING file in the top-level directory. | 
|  | */ | 
|  |  | 
|  | #include "qemu/osdep.h" | 
|  |  | 
|  | #include "libqtest-single.h" | 
|  | #include "libqos/pci.h" | 
|  | #include "libqos/pci-pc.h" | 
|  | #include "hw/pci/pci_regs.h" | 
|  |  | 
|  | #define BROKEN 1 | 
|  |  | 
|  | typedef struct TestData | 
|  | { | 
|  | int num_cpus; | 
|  | } TestData; | 
|  |  | 
|  | typedef struct FirmwareTestFixture { | 
|  | /* decides whether we're testing -bios or -pflash */ | 
|  | bool is_bios; | 
|  | } FirmwareTestFixture; | 
|  |  | 
|  | static QPCIBus *test_start_get_bus(const TestData *s) | 
|  | { | 
|  | char *cmdline; | 
|  |  | 
|  | cmdline = g_strdup_printf("-machine pc -smp %d", s->num_cpus); | 
|  | qtest_start(cmdline); | 
|  | g_free(cmdline); | 
|  | return qpci_new_pc(global_qtest, NULL); | 
|  | } | 
|  |  | 
|  | static void test_i440fx_defaults(gconstpointer opaque) | 
|  | { | 
|  | const TestData *s = opaque; | 
|  | QPCIBus *bus; | 
|  | QPCIDevice *dev; | 
|  | uint32_t value; | 
|  |  | 
|  | bus = test_start_get_bus(s); | 
|  | dev = qpci_device_find(bus, QPCI_DEVFN(0, 0)); | 
|  | g_assert(dev != NULL); | 
|  |  | 
|  | /* 3.2.2 */ | 
|  | g_assert_cmpint(qpci_config_readw(dev, PCI_VENDOR_ID), ==, 0x8086); | 
|  | /* 3.2.3 */ | 
|  | g_assert_cmpint(qpci_config_readw(dev, PCI_DEVICE_ID), ==, 0x1237); | 
|  | #ifndef BROKEN | 
|  | /* 3.2.4 */ | 
|  | g_assert_cmpint(qpci_config_readw(dev, PCI_COMMAND), ==, 0x0006); | 
|  | /* 3.2.5 */ | 
|  | g_assert_cmpint(qpci_config_readw(dev, PCI_STATUS), ==, 0x0280); | 
|  | #endif | 
|  | /* 3.2.7 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, PCI_CLASS_PROG), ==, 0x00); | 
|  | g_assert_cmpint(qpci_config_readw(dev, PCI_CLASS_DEVICE), ==, 0x0600); | 
|  | /* 3.2.8 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, PCI_LATENCY_TIMER), ==, 0x00); | 
|  | /* 3.2.9 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, PCI_HEADER_TYPE), ==, 0x00); | 
|  | /* 3.2.10 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, PCI_BIST), ==, 0x00); | 
|  |  | 
|  | /* 3.2.11 */ | 
|  | value = qpci_config_readw(dev, 0x50); /* PMCCFG */ | 
|  | if (s->num_cpus == 1) { /* WPE */ | 
|  | g_assert(!(value & (1 << 15))); | 
|  | } else { | 
|  | g_assert((value & (1 << 15))); | 
|  | } | 
|  |  | 
|  | g_assert(!(value & (1 << 6))); /* EPTE */ | 
|  |  | 
|  | /* 3.2.12 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x52), ==, 0x00); /* DETURBO */ | 
|  | /* 3.2.13 */ | 
|  | #ifndef BROKEN | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x53), ==, 0x80); /* DBC */ | 
|  | #endif | 
|  | /* 3.2.14 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x54), ==, 0x00); /* AXC */ | 
|  | /* 3.2.15 */ | 
|  | g_assert_cmpint(qpci_config_readw(dev, 0x55), ==, 0x0000); /* DRT */ | 
|  | #ifndef BROKEN | 
|  | /* 3.2.16 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x57), ==, 0x01); /* DRAMC */ | 
|  | /* 3.2.17 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x58), ==, 0x10); /* DRAMT */ | 
|  | #endif | 
|  | /* 3.2.18 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x59), ==, 0x00); /* PAM0 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x5A), ==, 0x00); /* PAM1 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x5B), ==, 0x00); /* PAM2 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x5C), ==, 0x00); /* PAM3 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x5D), ==, 0x00); /* PAM4 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x5E), ==, 0x00); /* PAM5 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x5F), ==, 0x00); /* PAM6 */ | 
|  | #ifndef BROKEN | 
|  | /* 3.2.19 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x60), ==, 0x01); /* DRB0 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x61), ==, 0x01); /* DRB1 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x62), ==, 0x01); /* DRB2 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x63), ==, 0x01); /* DRB3 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x64), ==, 0x01); /* DRB4 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x65), ==, 0x01); /* DRB5 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x66), ==, 0x01); /* DRB6 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x67), ==, 0x01); /* DRB7 */ | 
|  | #endif | 
|  | /* 3.2.20 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x68), ==, 0x00); /* FDHC */ | 
|  | /* 3.2.21 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x70), ==, 0x00); /* MTT */ | 
|  | #ifndef BROKEN | 
|  | /* 3.2.22 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x71), ==, 0x10); /* CLT */ | 
|  | #endif | 
|  | /* 3.2.23 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x72), ==, 0x02); /* SMRAM */ | 
|  | /* 3.2.24 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x90), ==, 0x00); /* ERRCMD */ | 
|  | /* 3.2.25 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x91), ==, 0x00); /* ERRSTS */ | 
|  | /* 3.2.26 */ | 
|  | g_assert_cmpint(qpci_config_readb(dev, 0x93), ==, 0x00); /* TRC */ | 
|  |  | 
|  | g_free(dev); | 
|  | qpci_free_pc(bus); | 
|  | qtest_end(); | 
|  | } | 
|  |  | 
|  | #define PAM_RE 1 | 
|  | #define PAM_WE 2 | 
|  |  | 
|  | static void pam_set(QPCIDevice *dev, int index, int flags) | 
|  | { | 
|  | int regno = 0x59 + (index / 2); | 
|  | uint8_t reg; | 
|  |  | 
|  | reg = qpci_config_readb(dev, regno); | 
|  | if (index & 1) { | 
|  | reg = (reg & 0x0F) | (flags << 4); | 
|  | } else { | 
|  | reg = (reg & 0xF0) | flags; | 
|  | } | 
|  | qpci_config_writeb(dev, regno, reg); | 
|  | } | 
|  |  | 
|  | static gboolean verify_area(uint32_t start, uint32_t end, uint8_t value) | 
|  | { | 
|  | uint32_t size = end - start + 1; | 
|  | gboolean ret = TRUE; | 
|  | uint8_t *data; | 
|  | int i; | 
|  |  | 
|  | data = g_malloc0(size); | 
|  | memread(start, data, size); | 
|  |  | 
|  | g_test_message("verify_area: data[0] = 0x%x", data[0]); | 
|  |  | 
|  | for (i = 0; i < size; i++) { | 
|  | if (data[i] != value) { | 
|  | ret = FALSE; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | g_free(data); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void write_area(uint32_t start, uint32_t end, uint8_t value) | 
|  | { | 
|  | uint32_t size = end - start + 1; | 
|  | uint8_t *data; | 
|  |  | 
|  | data = g_malloc(size); | 
|  | memset(data, value, size); | 
|  | memwrite(start, data, size); | 
|  |  | 
|  | g_free(data); | 
|  | } | 
|  |  | 
|  | static void test_i440fx_pam(gconstpointer opaque) | 
|  | { | 
|  | const TestData *s = opaque; | 
|  | QPCIBus *bus; | 
|  | QPCIDevice *dev; | 
|  | int i; | 
|  | static struct { | 
|  | uint32_t start; | 
|  | uint32_t end; | 
|  | } pam_area[] = { | 
|  | { 0, 0 },             /* Reserved */ | 
|  | { 0xF0000, 0xFFFFF }, /* BIOS Area */ | 
|  | { 0xC0000, 0xC3FFF }, /* Option ROM */ | 
|  | { 0xC4000, 0xC7FFF }, /* Option ROM */ | 
|  | { 0xC8000, 0xCBFFF }, /* Option ROM */ | 
|  | { 0xCC000, 0xCFFFF }, /* Option ROM */ | 
|  | { 0xD0000, 0xD3FFF }, /* Option ROM */ | 
|  | { 0xD4000, 0xD7FFF }, /* Option ROM */ | 
|  | { 0xD8000, 0xDBFFF }, /* Option ROM */ | 
|  | { 0xDC000, 0xDFFFF }, /* Option ROM */ | 
|  | { 0xE0000, 0xE3FFF }, /* BIOS Extension */ | 
|  | { 0xE4000, 0xE7FFF }, /* BIOS Extension */ | 
|  | { 0xE8000, 0xEBFFF }, /* BIOS Extension */ | 
|  | { 0xEC000, 0xEFFFF }, /* BIOS Extension */ | 
|  | }; | 
|  |  | 
|  | bus = test_start_get_bus(s); | 
|  | dev = qpci_device_find(bus, QPCI_DEVFN(0, 0)); | 
|  | g_assert(dev != NULL); | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(pam_area); i++) { | 
|  | if (pam_area[i].start == pam_area[i].end) { | 
|  | continue; | 
|  | } | 
|  |  | 
|  | g_test_message("Checking area 0x%05x..0x%05x", | 
|  | pam_area[i].start, pam_area[i].end); | 
|  | /* Switch to RE for the area */ | 
|  | pam_set(dev, i, PAM_RE); | 
|  | /* Verify the RAM is all zeros */ | 
|  | g_assert(verify_area(pam_area[i].start, pam_area[i].end, 0)); | 
|  |  | 
|  | /* Switch to WE for the area */ | 
|  | pam_set(dev, i, PAM_RE | PAM_WE); | 
|  | /* Write out a non-zero mask to the full area */ | 
|  | write_area(pam_area[i].start, pam_area[i].end, 0x42); | 
|  |  | 
|  | #ifndef BROKEN | 
|  | /* QEMU only supports a limited form of PAM */ | 
|  |  | 
|  | /* Switch to !RE for the area */ | 
|  | pam_set(dev, i, PAM_WE); | 
|  | /* Verify the area is not our mask */ | 
|  | g_assert(!verify_area(pam_area[i].start, pam_area[i].end, 0x42)); | 
|  | #endif | 
|  |  | 
|  | /* Verify the area is our new mask */ | 
|  | g_assert(verify_area(pam_area[i].start, pam_area[i].end, 0x42)); | 
|  |  | 
|  | /* Write out a new mask */ | 
|  | write_area(pam_area[i].start, pam_area[i].end, 0x82); | 
|  |  | 
|  | #ifndef BROKEN | 
|  | /* QEMU only supports a limited form of PAM */ | 
|  |  | 
|  | /* Verify the area is not our mask */ | 
|  | g_assert(!verify_area(pam_area[i].start, pam_area[i].end, 0x82)); | 
|  |  | 
|  | /* Switch to RE for the area */ | 
|  | pam_set(dev, i, PAM_RE | PAM_WE); | 
|  | #endif | 
|  | /* Verify the area is our new mask */ | 
|  | g_assert(verify_area(pam_area[i].start, pam_area[i].end, 0x82)); | 
|  |  | 
|  | /* Reset area */ | 
|  | pam_set(dev, i, 0); | 
|  |  | 
|  | /* Verify the area is not our new mask */ | 
|  | g_assert(!verify_area(pam_area[i].start, pam_area[i].end, 0x82)); | 
|  | } | 
|  |  | 
|  | g_free(dev); | 
|  | qpci_free_pc(bus); | 
|  | qtest_end(); | 
|  | } | 
|  |  | 
|  | #define BLOB_SIZE ((size_t)65536) | 
|  | #define ISA_BIOS_MAXSZ ((size_t)(128 * 1024)) | 
|  |  | 
|  | /* | 
|  | * Create a blob file, and return its absolute pathname as a dynamically | 
|  | * allocated string. | 
|  | * The file is closed before the function returns. | 
|  | * In case of error, the function aborts and prints the error message. | 
|  | */ | 
|  | static char *create_blob_file(void) | 
|  | { | 
|  | int i, fd; | 
|  | char *pathname; | 
|  | GError *error = NULL; | 
|  | g_autofree uint8_t *buf = g_malloc(BLOB_SIZE); | 
|  |  | 
|  | fd = g_file_open_tmp("blob_XXXXXX", &pathname, &error); | 
|  | g_assert_no_error(error); | 
|  | close(fd); | 
|  |  | 
|  | for (i = 0; i < BLOB_SIZE; i++) { | 
|  | buf[i] = i; | 
|  | } | 
|  |  | 
|  | g_file_set_contents(pathname, (char *)buf, BLOB_SIZE, &error); | 
|  | g_assert_no_error(error); | 
|  |  | 
|  | return pathname; | 
|  | } | 
|  |  | 
|  | static void test_i440fx_firmware(FirmwareTestFixture *fixture, | 
|  | gconstpointer user_data) | 
|  | { | 
|  | char *fw_pathname, *cmdline; | 
|  | uint8_t *buf; | 
|  | size_t i, isa_bios_size; | 
|  |  | 
|  | fw_pathname = create_blob_file(); | 
|  | g_assert(fw_pathname != NULL); | 
|  |  | 
|  | /* Better hope the user didn't put metacharacters in TMPDIR and co. */ | 
|  | cmdline = g_strdup_printf("-S %s%s", fixture->is_bios | 
|  | ? "-bios " | 
|  | : "-drive if=pflash,format=raw,file=", | 
|  | fw_pathname); | 
|  | g_test_message("qemu cmdline: %s", cmdline); | 
|  | qtest_start(cmdline); | 
|  | g_free(cmdline); | 
|  |  | 
|  | /* QEMU has loaded the firmware (because qtest_start() only returns after | 
|  | * the QMP handshake completes). We must unlink the firmware blob right | 
|  | * here, because any assertion firing below would leak it in the | 
|  | * filesystem. This is also the reason why we recreate the blob every time | 
|  | * this function is invoked. | 
|  | */ | 
|  | unlink(fw_pathname); | 
|  | g_free(fw_pathname); | 
|  |  | 
|  | /* check below 4G */ | 
|  | buf = g_malloc0(BLOB_SIZE); | 
|  | memread(0x100000000ULL - BLOB_SIZE, buf, BLOB_SIZE); | 
|  | for (i = 0; i < BLOB_SIZE; ++i) { | 
|  | g_assert_cmphex(buf[i], ==, (uint8_t)i); | 
|  | } | 
|  |  | 
|  | /* check in ISA space too */ | 
|  | memset(buf, 0, BLOB_SIZE); | 
|  | isa_bios_size = ISA_BIOS_MAXSZ < BLOB_SIZE ? ISA_BIOS_MAXSZ : BLOB_SIZE; | 
|  | memread(0x100000 - isa_bios_size, buf, isa_bios_size); | 
|  | for (i = 0; i < isa_bios_size; ++i) { | 
|  | g_assert_cmphex(buf[i], ==, | 
|  | (uint8_t)((BLOB_SIZE - isa_bios_size) + i)); | 
|  | } | 
|  |  | 
|  | g_free(buf); | 
|  | qtest_end(); | 
|  | } | 
|  |  | 
|  | static void add_firmware_test(const char *testpath, | 
|  | void (*setup_fixture)(FirmwareTestFixture *f, | 
|  | gconstpointer test_data)) | 
|  | { | 
|  | qtest_add(testpath, FirmwareTestFixture, NULL, setup_fixture, | 
|  | test_i440fx_firmware, NULL); | 
|  | } | 
|  |  | 
|  | static void request_bios(FirmwareTestFixture *fixture, | 
|  | gconstpointer user_data) | 
|  | { | 
|  | fixture->is_bios = true; | 
|  | } | 
|  |  | 
|  | static void request_pflash(FirmwareTestFixture *fixture, | 
|  | gconstpointer user_data) | 
|  | { | 
|  | fixture->is_bios = false; | 
|  | } | 
|  |  | 
|  | int main(int argc, char **argv) | 
|  | { | 
|  | TestData data; | 
|  |  | 
|  | g_test_init(&argc, &argv, NULL); | 
|  |  | 
|  | data.num_cpus = 1; | 
|  |  | 
|  | qtest_add_data_func("i440fx/defaults", &data, test_i440fx_defaults); | 
|  | qtest_add_data_func("i440fx/pam", &data, test_i440fx_pam); | 
|  | add_firmware_test("i440fx/firmware/bios", request_bios); | 
|  | add_firmware_test("i440fx/firmware/pflash", request_pflash); | 
|  |  | 
|  | return g_test_run(); | 
|  | } |