| /* |
| * QEMU CXL Devices |
| * |
| * Copyright (c) 2020 Intel |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2. See the |
| * COPYING file in the top-level directory. |
| */ |
| |
| #ifndef CXL_DEVICE_H |
| #define CXL_DEVICE_H |
| |
| #include "hw/cxl/cxl_component.h" |
| #include "hw/pci/pci_device.h" |
| #include "hw/register.h" |
| |
| /* |
| * The following is how a CXL device's Memory Device registers are laid out. |
| * The only requirement from the spec is that the capabilities array and the |
| * capability headers start at offset 0 and are contiguously packed. The headers |
| * themselves provide offsets to the register fields. For this emulation, the |
| * actual registers * will start at offset 0x80 (m == 0x80). No secondary |
| * mailbox is implemented which means that the offset of the start of the |
| * mailbox payload (n) is given by |
| * n = m + sizeof(mailbox registers) + sizeof(device registers). |
| * |
| * +---------------------------------+ |
| * | | |
| * | Memory Device Registers | |
| * | | |
| * n + PAYLOAD_SIZE_MAX ----------------------------------- |
| * ^ | | |
| * | | | |
| * | | | |
| * | | | |
| * | | | |
| * | | Mailbox Payload | |
| * | | | |
| * | | | |
| * | | | |
| * n ----------------------------------- |
| * ^ | Mailbox Registers | |
| * | | | |
| * | ----------------------------------- |
| * | | | |
| * | | Device Registers | |
| * | | | |
| * m ----------------------------------> |
| * ^ | Memory Device Capability Header| |
| * | ----------------------------------- |
| * | | Mailbox Capability Header | |
| * | ----------------------------------- |
| * | | Device Capability Header | |
| * | ----------------------------------- |
| * | | Device Cap Array Register | |
| * 0 +---------------------------------+ |
| * |
| */ |
| |
| #define CXL_DEVICE_CAP_HDR1_OFFSET 0x10 /* Figure 138 */ |
| #define CXL_DEVICE_CAP_REG_SIZE 0x10 /* 8.2.8.2 */ |
| #define CXL_DEVICE_CAPS_MAX 4 /* 8.2.8.2.1 + 8.2.8.5 */ |
| #define CXL_CAPS_SIZE \ |
| (CXL_DEVICE_CAP_REG_SIZE * (CXL_DEVICE_CAPS_MAX + 1)) /* +1 for header */ |
| |
| #define CXL_DEVICE_STATUS_REGISTERS_OFFSET 0x80 /* Read comment above */ |
| #define CXL_DEVICE_STATUS_REGISTERS_LENGTH 0x8 /* 8.2.8.3.1 */ |
| |
| #define CXL_MAILBOX_REGISTERS_OFFSET \ |
| (CXL_DEVICE_STATUS_REGISTERS_OFFSET + CXL_DEVICE_STATUS_REGISTERS_LENGTH) |
| #define CXL_MAILBOX_REGISTERS_SIZE 0x20 /* 8.2.8.4, Figure 139 */ |
| #define CXL_MAILBOX_PAYLOAD_SHIFT 11 |
| #define CXL_MAILBOX_MAX_PAYLOAD_SIZE (1 << CXL_MAILBOX_PAYLOAD_SHIFT) |
| #define CXL_MAILBOX_REGISTERS_LENGTH \ |
| (CXL_MAILBOX_REGISTERS_SIZE + CXL_MAILBOX_MAX_PAYLOAD_SIZE) |
| |
| #define CXL_MEMORY_DEVICE_REGISTERS_OFFSET \ |
| (CXL_MAILBOX_REGISTERS_OFFSET + CXL_MAILBOX_REGISTERS_LENGTH) |
| #define CXL_MEMORY_DEVICE_REGISTERS_LENGTH 0x8 |
| |
| #define CXL_MMIO_SIZE \ |
| (CXL_DEVICE_CAP_REG_SIZE + CXL_DEVICE_STATUS_REGISTERS_LENGTH + \ |
| CXL_MAILBOX_REGISTERS_LENGTH + CXL_MEMORY_DEVICE_REGISTERS_LENGTH) |
| |
| typedef struct cxl_device_state { |
| MemoryRegion device_registers; |
| |
| /* mmio for device capabilities array - 8.2.8.2 */ |
| MemoryRegion device; |
| MemoryRegion memory_device; |
| struct { |
| MemoryRegion caps; |
| union { |
| uint32_t caps_reg_state32[CXL_CAPS_SIZE / 4]; |
| uint64_t caps_reg_state64[CXL_CAPS_SIZE / 8]; |
| }; |
| }; |
| |
| /* mmio for the mailbox registers 8.2.8.4 */ |
| struct { |
| MemoryRegion mailbox; |
| uint16_t payload_size; |
| union { |
| uint8_t mbox_reg_state[CXL_MAILBOX_REGISTERS_LENGTH]; |
| uint16_t mbox_reg_state16[CXL_MAILBOX_REGISTERS_LENGTH / 2]; |
| uint32_t mbox_reg_state32[CXL_MAILBOX_REGISTERS_LENGTH / 4]; |
| uint64_t mbox_reg_state64[CXL_MAILBOX_REGISTERS_LENGTH / 8]; |
| }; |
| struct cel_log { |
| uint16_t opcode; |
| uint16_t effect; |
| } cel_log[1 << 16]; |
| size_t cel_size; |
| }; |
| |
| struct { |
| bool set; |
| uint64_t last_set; |
| uint64_t host_set; |
| } timestamp; |
| |
| /* memory region for persistent memory, HDM */ |
| uint64_t pmem_size; |
| } CXLDeviceState; |
| |
| /* Initialize the register block for a device */ |
| void cxl_device_register_block_init(Object *obj, CXLDeviceState *dev); |
| |
| /* Set up default values for the register block */ |
| void cxl_device_register_init_common(CXLDeviceState *dev); |
| |
| /* |
| * CXL 2.0 - 8.2.8.1 including errata F4 |
| * Documented as a 128 bit register, but 64 bit accesses and the second |
| * 64 bits are currently reserved. |
| */ |
| REG64(CXL_DEV_CAP_ARRAY, 0) /* Documented as 128 bit register but 64 byte accesses */ |
| FIELD(CXL_DEV_CAP_ARRAY, CAP_ID, 0, 16) |
| FIELD(CXL_DEV_CAP_ARRAY, CAP_VERSION, 16, 8) |
| FIELD(CXL_DEV_CAP_ARRAY, CAP_COUNT, 32, 16) |
| |
| /* |
| * Helper macro to initialize capability headers for CXL devices. |
| * |
| * In the 8.2.8.2, this is listed as a 128b register, but in 8.2.8, it says: |
| * > No registers defined in Section 8.2.8 are larger than 64-bits wide so that |
| * > is the maximum access size allowed for these registers. If this rule is not |
| * > followed, the behavior is undefined |
| * |
| * CXL 2.0 Errata F4 states futher that the layouts in the specification are |
| * shown as greater than 128 bits, but implementations are expected to |
| * use any size of access up to 64 bits. |
| * |
| * Here we've chosen to make it 4 dwords. The spec allows any pow2 multiple |
| * access to be used for a register up to 64 bits. |
| */ |
| #define CXL_DEVICE_CAPABILITY_HEADER_REGISTER(n, offset) \ |
| REG32(CXL_DEV_##n##_CAP_HDR0, offset) \ |
| FIELD(CXL_DEV_##n##_CAP_HDR0, CAP_ID, 0, 16) \ |
| FIELD(CXL_DEV_##n##_CAP_HDR0, CAP_VERSION, 16, 8) \ |
| REG32(CXL_DEV_##n##_CAP_HDR1, offset + 4) \ |
| FIELD(CXL_DEV_##n##_CAP_HDR1, CAP_OFFSET, 0, 32) \ |
| REG32(CXL_DEV_##n##_CAP_HDR2, offset + 8) \ |
| FIELD(CXL_DEV_##n##_CAP_HDR2, CAP_LENGTH, 0, 32) |
| |
| CXL_DEVICE_CAPABILITY_HEADER_REGISTER(DEVICE_STATUS, CXL_DEVICE_CAP_HDR1_OFFSET) |
| CXL_DEVICE_CAPABILITY_HEADER_REGISTER(MAILBOX, CXL_DEVICE_CAP_HDR1_OFFSET + \ |
| CXL_DEVICE_CAP_REG_SIZE) |
| CXL_DEVICE_CAPABILITY_HEADER_REGISTER(MEMORY_DEVICE, |
| CXL_DEVICE_CAP_HDR1_OFFSET + |
| CXL_DEVICE_CAP_REG_SIZE * 2) |
| |
| void cxl_initialize_mailbox(CXLDeviceState *cxl_dstate); |
| void cxl_process_mailbox(CXLDeviceState *cxl_dstate); |
| |
| #define cxl_device_cap_init(dstate, reg, cap_id) \ |
| do { \ |
| uint32_t *cap_hdrs = dstate->caps_reg_state32; \ |
| int which = R_CXL_DEV_##reg##_CAP_HDR0; \ |
| cap_hdrs[which] = \ |
| FIELD_DP32(cap_hdrs[which], CXL_DEV_##reg##_CAP_HDR0, \ |
| CAP_ID, cap_id); \ |
| cap_hdrs[which] = FIELD_DP32( \ |
| cap_hdrs[which], CXL_DEV_##reg##_CAP_HDR0, CAP_VERSION, 1); \ |
| cap_hdrs[which + 1] = \ |
| FIELD_DP32(cap_hdrs[which + 1], CXL_DEV_##reg##_CAP_HDR1, \ |
| CAP_OFFSET, CXL_##reg##_REGISTERS_OFFSET); \ |
| cap_hdrs[which + 2] = \ |
| FIELD_DP32(cap_hdrs[which + 2], CXL_DEV_##reg##_CAP_HDR2, \ |
| CAP_LENGTH, CXL_##reg##_REGISTERS_LENGTH); \ |
| } while (0) |
| |
| /* CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register */ |
| REG32(CXL_DEV_MAILBOX_CAP, 0) |
| FIELD(CXL_DEV_MAILBOX_CAP, PAYLOAD_SIZE, 0, 5) |
| FIELD(CXL_DEV_MAILBOX_CAP, INT_CAP, 5, 1) |
| FIELD(CXL_DEV_MAILBOX_CAP, BG_INT_CAP, 6, 1) |
| FIELD(CXL_DEV_MAILBOX_CAP, MSI_N, 7, 4) |
| |
| /* CXL 2.0 8.2.8.4.4 Mailbox Control Register */ |
| REG32(CXL_DEV_MAILBOX_CTRL, 4) |
| FIELD(CXL_DEV_MAILBOX_CTRL, DOORBELL, 0, 1) |
| FIELD(CXL_DEV_MAILBOX_CTRL, INT_EN, 1, 1) |
| FIELD(CXL_DEV_MAILBOX_CTRL, BG_INT_EN, 2, 1) |
| |
| /* CXL 2.0 8.2.8.4.5 Command Register */ |
| REG64(CXL_DEV_MAILBOX_CMD, 8) |
| FIELD(CXL_DEV_MAILBOX_CMD, COMMAND, 0, 8) |
| FIELD(CXL_DEV_MAILBOX_CMD, COMMAND_SET, 8, 8) |
| FIELD(CXL_DEV_MAILBOX_CMD, LENGTH, 16, 20) |
| |
| /* CXL 2.0 8.2.8.4.6 Mailbox Status Register */ |
| REG64(CXL_DEV_MAILBOX_STS, 0x10) |
| FIELD(CXL_DEV_MAILBOX_STS, BG_OP, 0, 1) |
| FIELD(CXL_DEV_MAILBOX_STS, ERRNO, 32, 16) |
| FIELD(CXL_DEV_MAILBOX_STS, VENDOR_ERRNO, 48, 16) |
| |
| /* CXL 2.0 8.2.8.4.7 Background Command Status Register */ |
| REG64(CXL_DEV_BG_CMD_STS, 0x18) |
| FIELD(CXL_DEV_BG_CMD_STS, OP, 0, 16) |
| FIELD(CXL_DEV_BG_CMD_STS, PERCENTAGE_COMP, 16, 7) |
| FIELD(CXL_DEV_BG_CMD_STS, RET_CODE, 32, 16) |
| FIELD(CXL_DEV_BG_CMD_STS, VENDOR_RET_CODE, 48, 16) |
| |
| /* CXL 2.0 8.2.8.4.8 Command Payload Registers */ |
| REG32(CXL_DEV_CMD_PAYLOAD, 0x20) |
| |
| REG64(CXL_MEM_DEV_STS, 0) |
| FIELD(CXL_MEM_DEV_STS, FATAL, 0, 1) |
| FIELD(CXL_MEM_DEV_STS, FW_HALT, 1, 1) |
| FIELD(CXL_MEM_DEV_STS, MEDIA_STATUS, 2, 2) |
| FIELD(CXL_MEM_DEV_STS, MBOX_READY, 4, 1) |
| FIELD(CXL_MEM_DEV_STS, RESET_NEEDED, 5, 3) |
| |
| struct CXLType3Dev { |
| /* Private */ |
| PCIDevice parent_obj; |
| |
| /* Properties */ |
| HostMemoryBackend *hostmem; |
| HostMemoryBackend *lsa; |
| uint64_t sn; |
| |
| /* State */ |
| AddressSpace hostmem_as; |
| CXLComponentState cxl_cstate; |
| CXLDeviceState cxl_dstate; |
| |
| /* DOE */ |
| DOECap doe_cdat; |
| }; |
| |
| #define TYPE_CXL_TYPE3 "cxl-type3" |
| OBJECT_DECLARE_TYPE(CXLType3Dev, CXLType3Class, CXL_TYPE3) |
| |
| struct CXLType3Class { |
| /* Private */ |
| PCIDeviceClass parent_class; |
| |
| /* public */ |
| uint64_t (*get_lsa_size)(CXLType3Dev *ct3d); |
| |
| uint64_t (*get_lsa)(CXLType3Dev *ct3d, void *buf, uint64_t size, |
| uint64_t offset); |
| void (*set_lsa)(CXLType3Dev *ct3d, const void *buf, uint64_t size, |
| uint64_t offset); |
| }; |
| |
| MemTxResult cxl_type3_read(PCIDevice *d, hwaddr host_addr, uint64_t *data, |
| unsigned size, MemTxAttrs attrs); |
| MemTxResult cxl_type3_write(PCIDevice *d, hwaddr host_addr, uint64_t data, |
| unsigned size, MemTxAttrs attrs); |
| |
| #endif |
