| /* |
| * QEMU ATAPI Emulation |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * Copyright (c) 2006 Openedhand Ltd. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/ide/internal.h" |
| #include "hw/scsi/scsi.h" |
| #include "sysemu/block-backend.h" |
| #include "trace.h" |
| |
| #define ATAPI_SECTOR_BITS (2 + BDRV_SECTOR_BITS) |
| #define ATAPI_SECTOR_SIZE (1 << ATAPI_SECTOR_BITS) |
| |
| static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret); |
| |
| static void padstr8(uint8_t *buf, int buf_size, const char *src) |
| { |
| int i; |
| for(i = 0; i < buf_size; i++) { |
| if (*src) |
| buf[i] = *src++; |
| else |
| buf[i] = ' '; |
| } |
| } |
| |
| static void lba_to_msf(uint8_t *buf, int lba) |
| { |
| lba += 150; |
| buf[0] = (lba / 75) / 60; |
| buf[1] = (lba / 75) % 60; |
| buf[2] = lba % 75; |
| } |
| |
| static inline int media_present(IDEState *s) |
| { |
| return !s->tray_open && s->nb_sectors > 0; |
| } |
| |
| /* XXX: DVDs that could fit on a CD will be reported as a CD */ |
| static inline int media_is_dvd(IDEState *s) |
| { |
| return (media_present(s) && s->nb_sectors > CD_MAX_SECTORS); |
| } |
| |
| static inline int media_is_cd(IDEState *s) |
| { |
| return (media_present(s) && s->nb_sectors <= CD_MAX_SECTORS); |
| } |
| |
| static void cd_data_to_raw(uint8_t *buf, int lba) |
| { |
| /* sync bytes */ |
| buf[0] = 0x00; |
| memset(buf + 1, 0xff, 10); |
| buf[11] = 0x00; |
| buf += 12; |
| /* MSF */ |
| lba_to_msf(buf, lba); |
| buf[3] = 0x01; /* mode 1 data */ |
| buf += 4; |
| /* data */ |
| buf += 2048; |
| /* XXX: ECC not computed */ |
| memset(buf, 0, 288); |
| } |
| |
| static int |
| cd_read_sector_sync(IDEState *s) |
| { |
| int ret; |
| block_acct_start(blk_get_stats(s->blk), &s->acct, |
| ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ); |
| |
| trace_cd_read_sector_sync(s->lba); |
| |
| switch (s->cd_sector_size) { |
| case 2048: |
| ret = blk_pread(s->blk, (int64_t)s->lba << ATAPI_SECTOR_BITS, |
| ATAPI_SECTOR_SIZE, s->io_buffer, 0); |
| break; |
| case 2352: |
| ret = blk_pread(s->blk, (int64_t)s->lba << ATAPI_SECTOR_BITS, |
| ATAPI_SECTOR_SIZE, s->io_buffer + 16, 0); |
| if (ret >= 0) { |
| cd_data_to_raw(s->io_buffer, s->lba); |
| } |
| break; |
| default: |
| block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ); |
| return -EIO; |
| } |
| |
| if (ret < 0) { |
| block_acct_failed(blk_get_stats(s->blk), &s->acct); |
| } else { |
| block_acct_done(blk_get_stats(s->blk), &s->acct); |
| s->lba++; |
| s->io_buffer_index = 0; |
| } |
| |
| return ret; |
| } |
| |
| static void cd_read_sector_cb(void *opaque, int ret) |
| { |
| IDEState *s = opaque; |
| |
| trace_cd_read_sector_cb(s->lba, ret); |
| |
| if (ret < 0) { |
| block_acct_failed(blk_get_stats(s->blk), &s->acct); |
| ide_atapi_io_error(s, ret); |
| return; |
| } |
| |
| block_acct_done(blk_get_stats(s->blk), &s->acct); |
| |
| if (s->cd_sector_size == 2352) { |
| cd_data_to_raw(s->io_buffer, s->lba); |
| } |
| |
| s->lba++; |
| s->io_buffer_index = 0; |
| s->status &= ~BUSY_STAT; |
| |
| ide_atapi_cmd_reply_end(s); |
| } |
| |
| static int cd_read_sector(IDEState *s) |
| { |
| void *buf; |
| |
| if (s->cd_sector_size != 2048 && s->cd_sector_size != 2352) { |
| block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ); |
| return -EINVAL; |
| } |
| |
| buf = (s->cd_sector_size == 2352) ? s->io_buffer + 16 : s->io_buffer; |
| qemu_iovec_init_buf(&s->qiov, buf, ATAPI_SECTOR_SIZE); |
| |
| trace_cd_read_sector(s->lba); |
| |
| block_acct_start(blk_get_stats(s->blk), &s->acct, |
| ATAPI_SECTOR_SIZE, BLOCK_ACCT_READ); |
| |
| ide_buffered_readv(s, (int64_t)s->lba << 2, &s->qiov, 4, |
| cd_read_sector_cb, s); |
| |
| s->status |= BUSY_STAT; |
| return 0; |
| } |
| |
| void ide_atapi_cmd_ok(IDEState *s) |
| { |
| s->error = 0; |
| s->status = READY_STAT | SEEK_STAT; |
| s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; |
| ide_transfer_stop(s); |
| ide_set_irq(s->bus); |
| } |
| |
| void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc) |
| { |
| trace_ide_atapi_cmd_error(s, sense_key, asc); |
| s->error = sense_key << 4; |
| s->status = READY_STAT | ERR_STAT; |
| s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; |
| s->sense_key = sense_key; |
| s->asc = asc; |
| ide_transfer_stop(s); |
| ide_set_irq(s->bus); |
| } |
| |
| void ide_atapi_io_error(IDEState *s, int ret) |
| { |
| /* XXX: handle more errors */ |
| if (ret == -ENOMEDIUM) { |
| ide_atapi_cmd_error(s, NOT_READY, |
| ASC_MEDIUM_NOT_PRESENT); |
| } else { |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, |
| ASC_LOGICAL_BLOCK_OOR); |
| } |
| } |
| |
| static uint16_t atapi_byte_count_limit(IDEState *s) |
| { |
| uint16_t bcl; |
| |
| bcl = s->lcyl | (s->hcyl << 8); |
| if (bcl == 0xffff) { |
| return 0xfffe; |
| } |
| return bcl; |
| } |
| |
| /* The whole ATAPI transfer logic is handled in this function */ |
| void ide_atapi_cmd_reply_end(IDEState *s) |
| { |
| int byte_count_limit, size, ret; |
| while (s->packet_transfer_size > 0) { |
| trace_ide_atapi_cmd_reply_end(s, s->packet_transfer_size, |
| s->elementary_transfer_size, |
| s->io_buffer_index); |
| |
| /* see if a new sector must be read */ |
| if (s->lba != -1 && s->io_buffer_index >= s->cd_sector_size) { |
| if (!s->elementary_transfer_size) { |
| ret = cd_read_sector(s); |
| if (ret < 0) { |
| ide_atapi_io_error(s, ret); |
| } |
| return; |
| } else { |
| /* rebuffering within an elementary transfer is |
| * only possible with a sync request because we |
| * end up with a race condition otherwise */ |
| ret = cd_read_sector_sync(s); |
| if (ret < 0) { |
| ide_atapi_io_error(s, ret); |
| return; |
| } |
| } |
| } |
| if (s->elementary_transfer_size > 0) { |
| /* there are some data left to transmit in this elementary |
| transfer */ |
| size = s->cd_sector_size - s->io_buffer_index; |
| if (size > s->elementary_transfer_size) |
| size = s->elementary_transfer_size; |
| } else { |
| /* a new transfer is needed */ |
| s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO; |
| ide_set_irq(s->bus); |
| byte_count_limit = atapi_byte_count_limit(s); |
| trace_ide_atapi_cmd_reply_end_bcl(s, byte_count_limit); |
| size = s->packet_transfer_size; |
| if (size > byte_count_limit) { |
| /* byte count limit must be even if this case */ |
| if (byte_count_limit & 1) |
| byte_count_limit--; |
| size = byte_count_limit; |
| } |
| s->lcyl = size; |
| s->hcyl = size >> 8; |
| s->elementary_transfer_size = size; |
| /* we cannot transmit more than one sector at a time */ |
| if (s->lba != -1) { |
| if (size > (s->cd_sector_size - s->io_buffer_index)) |
| size = (s->cd_sector_size - s->io_buffer_index); |
| } |
| trace_ide_atapi_cmd_reply_end_new(s, s->status); |
| } |
| s->packet_transfer_size -= size; |
| s->elementary_transfer_size -= size; |
| s->io_buffer_index += size; |
| assert(size <= s->io_buffer_total_len); |
| assert(s->io_buffer_index <= s->io_buffer_total_len); |
| |
| /* Some adapters process PIO data right away. In that case, we need |
| * to avoid mutual recursion between ide_transfer_start |
| * and ide_atapi_cmd_reply_end. |
| */ |
| if (!ide_transfer_start_norecurse(s, |
| s->io_buffer + s->io_buffer_index - size, |
| size, ide_atapi_cmd_reply_end)) { |
| return; |
| } |
| } |
| |
| /* end of transfer */ |
| trace_ide_atapi_cmd_reply_end_eot(s, s->status); |
| ide_atapi_cmd_ok(s); |
| ide_set_irq(s->bus); |
| } |
| |
| /* send a reply of 'size' bytes in s->io_buffer to an ATAPI command */ |
| static void ide_atapi_cmd_reply(IDEState *s, int size, int max_size) |
| { |
| if (size > max_size) |
| size = max_size; |
| s->lba = -1; /* no sector read */ |
| s->packet_transfer_size = size; |
| s->io_buffer_size = size; /* dma: send the reply data as one chunk */ |
| s->elementary_transfer_size = 0; |
| |
| if (s->atapi_dma) { |
| block_acct_start(blk_get_stats(s->blk), &s->acct, size, |
| BLOCK_ACCT_READ); |
| s->status = READY_STAT | SEEK_STAT | DRQ_STAT; |
| ide_start_dma(s, ide_atapi_cmd_read_dma_cb); |
| } else { |
| s->status = READY_STAT | SEEK_STAT; |
| s->io_buffer_index = 0; |
| ide_atapi_cmd_reply_end(s); |
| } |
| } |
| |
| /* start a CD-ROM read command */ |
| static void ide_atapi_cmd_read_pio(IDEState *s, int lba, int nb_sectors, |
| int sector_size) |
| { |
| assert(0 <= lba && lba < (s->nb_sectors >> 2)); |
| |
| s->lba = lba; |
| s->packet_transfer_size = nb_sectors * sector_size; |
| s->elementary_transfer_size = 0; |
| s->io_buffer_index = sector_size; |
| s->cd_sector_size = sector_size; |
| |
| ide_atapi_cmd_reply_end(s); |
| } |
| |
| static void ide_atapi_cmd_check_status(IDEState *s) |
| { |
| trace_ide_atapi_cmd_check_status(s); |
| s->error = MC_ERR | (UNIT_ATTENTION << 4); |
| s->status = ERR_STAT; |
| s->nsector = 0; |
| ide_set_irq(s->bus); |
| } |
| /* ATAPI DMA support */ |
| |
| static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret) |
| { |
| IDEState *s = opaque; |
| int data_offset, n; |
| |
| if (ret < 0) { |
| if (ide_handle_rw_error(s, -ret, ide_dma_cmd_to_retry(s->dma_cmd))) { |
| if (s->bus->error_status) { |
| s->bus->dma->aiocb = NULL; |
| return; |
| } |
| goto eot; |
| } |
| } |
| |
| if (s->io_buffer_size > 0) { |
| /* |
| * For a cdrom read sector command (s->lba != -1), |
| * adjust the lba for the next s->io_buffer_size chunk |
| * and dma the current chunk. |
| * For a command != read (s->lba == -1), just transfer |
| * the reply data. |
| */ |
| if (s->lba != -1) { |
| if (s->cd_sector_size == 2352) { |
| n = 1; |
| cd_data_to_raw(s->io_buffer, s->lba); |
| } else { |
| n = s->io_buffer_size >> 11; |
| } |
| s->lba += n; |
| } |
| s->packet_transfer_size -= s->io_buffer_size; |
| if (s->bus->dma->ops->rw_buf(s->bus->dma, 1) == 0) |
| goto eot; |
| } |
| |
| if (s->packet_transfer_size <= 0) { |
| s->status = READY_STAT | SEEK_STAT; |
| s->nsector = (s->nsector & ~7) | ATAPI_INT_REASON_IO | ATAPI_INT_REASON_CD; |
| ide_set_irq(s->bus); |
| goto eot; |
| } |
| |
| s->io_buffer_index = 0; |
| if (s->cd_sector_size == 2352) { |
| n = 1; |
| s->io_buffer_size = s->cd_sector_size; |
| data_offset = 16; |
| } else { |
| n = s->packet_transfer_size >> 11; |
| if (n > (IDE_DMA_BUF_SECTORS / 4)) |
| n = (IDE_DMA_BUF_SECTORS / 4); |
| s->io_buffer_size = n * 2048; |
| data_offset = 0; |
| } |
| trace_ide_atapi_cmd_read_dma_cb_aio(s, s->lba, n); |
| qemu_iovec_init_buf(&s->bus->dma->qiov, s->io_buffer + data_offset, |
| n * ATAPI_SECTOR_SIZE); |
| |
| s->bus->dma->aiocb = ide_buffered_readv(s, (int64_t)s->lba << 2, |
| &s->bus->dma->qiov, n * 4, |
| ide_atapi_cmd_read_dma_cb, s); |
| return; |
| |
| eot: |
| if (ret < 0) { |
| block_acct_failed(blk_get_stats(s->blk), &s->acct); |
| } else { |
| block_acct_done(blk_get_stats(s->blk), &s->acct); |
| } |
| ide_set_inactive(s, false); |
| } |
| |
| /* start a CD-ROM read command with DMA */ |
| /* XXX: test if DMA is available */ |
| static void ide_atapi_cmd_read_dma(IDEState *s, int lba, int nb_sectors, |
| int sector_size) |
| { |
| assert(0 <= lba && lba < (s->nb_sectors >> 2)); |
| |
| s->lba = lba; |
| s->packet_transfer_size = nb_sectors * sector_size; |
| s->io_buffer_size = 0; |
| s->cd_sector_size = sector_size; |
| |
| block_acct_start(blk_get_stats(s->blk), &s->acct, s->packet_transfer_size, |
| BLOCK_ACCT_READ); |
| |
| /* XXX: check if BUSY_STAT should be set */ |
| s->status = READY_STAT | SEEK_STAT | DRQ_STAT | BUSY_STAT; |
| ide_start_dma(s, ide_atapi_cmd_read_dma_cb); |
| } |
| |
| static void ide_atapi_cmd_read(IDEState *s, int lba, int nb_sectors, |
| int sector_size) |
| { |
| trace_ide_atapi_cmd_read(s, s->atapi_dma ? "dma" : "pio", |
| lba, nb_sectors); |
| if (s->atapi_dma) { |
| ide_atapi_cmd_read_dma(s, lba, nb_sectors, sector_size); |
| } else { |
| ide_atapi_cmd_read_pio(s, lba, nb_sectors, sector_size); |
| } |
| } |
| |
| void ide_atapi_dma_restart(IDEState *s) |
| { |
| /* |
| * At this point we can just re-evaluate the packet command and start over. |
| * The presence of ->dma_cb callback in the pre_save ensures that the packet |
| * command has been completely sent and we can safely restart command. |
| */ |
| s->unit = s->bus->retry_unit; |
| s->bus->dma->ops->restart_dma(s->bus->dma); |
| ide_atapi_cmd(s); |
| } |
| |
| static inline uint8_t ide_atapi_set_profile(uint8_t *buf, uint8_t *index, |
| uint16_t profile) |
| { |
| uint8_t *buf_profile = buf + 12; /* start of profiles */ |
| |
| buf_profile += ((*index) * 4); /* start of indexed profile */ |
| stw_be_p(buf_profile, profile); |
| buf_profile[2] = ((buf_profile[0] == buf[6]) && (buf_profile[1] == buf[7])); |
| |
| /* each profile adds 4 bytes to the response */ |
| (*index)++; |
| buf[11] += 4; /* Additional Length */ |
| |
| return 4; |
| } |
| |
| static int ide_dvd_read_structure(IDEState *s, int format, |
| const uint8_t *packet, uint8_t *buf) |
| { |
| switch (format) { |
| case 0x0: /* Physical format information */ |
| { |
| int layer = packet[6]; |
| uint64_t total_sectors; |
| |
| if (layer != 0) |
| return -ASC_INV_FIELD_IN_CMD_PACKET; |
| |
| total_sectors = s->nb_sectors >> 2; |
| if (total_sectors == 0) { |
| return -ASC_MEDIUM_NOT_PRESENT; |
| } |
| |
| buf[4] = 1; /* DVD-ROM, part version 1 */ |
| buf[5] = 0xf; /* 120mm disc, minimum rate unspecified */ |
| buf[6] = 1; /* one layer, read-only (per MMC-2 spec) */ |
| buf[7] = 0; /* default densities */ |
| |
| /* FIXME: 0x30000 per spec? */ |
| stl_be_p(buf + 8, 0); /* start sector */ |
| stl_be_p(buf + 12, total_sectors - 1); /* end sector */ |
| stl_be_p(buf + 16, total_sectors - 1); /* l0 end sector */ |
| |
| /* Size of buffer, not including 2 byte size field */ |
| stw_be_p(buf, 2048 + 2); |
| |
| /* 2k data + 4 byte header */ |
| return (2048 + 4); |
| } |
| |
| case 0x01: /* DVD copyright information */ |
| buf[4] = 0; /* no copyright data */ |
| buf[5] = 0; /* no region restrictions */ |
| |
| /* Size of buffer, not including 2 byte size field */ |
| stw_be_p(buf, 4 + 2); |
| |
| /* 4 byte header + 4 byte data */ |
| return (4 + 4); |
| |
| case 0x03: /* BCA information - invalid field for no BCA info */ |
| return -ASC_INV_FIELD_IN_CMD_PACKET; |
| |
| case 0x04: /* DVD disc manufacturing information */ |
| /* Size of buffer, not including 2 byte size field */ |
| stw_be_p(buf, 2048 + 2); |
| |
| /* 2k data + 4 byte header */ |
| return (2048 + 4); |
| |
| case 0xff: |
| /* |
| * This lists all the command capabilities above. Add new ones |
| * in order and update the length and buffer return values. |
| */ |
| |
| buf[4] = 0x00; /* Physical format */ |
| buf[5] = 0x40; /* Not writable, is readable */ |
| stw_be_p(buf + 6, 2048 + 4); |
| |
| buf[8] = 0x01; /* Copyright info */ |
| buf[9] = 0x40; /* Not writable, is readable */ |
| stw_be_p(buf + 10, 4 + 4); |
| |
| buf[12] = 0x03; /* BCA info */ |
| buf[13] = 0x40; /* Not writable, is readable */ |
| stw_be_p(buf + 14, 188 + 4); |
| |
| buf[16] = 0x04; /* Manufacturing info */ |
| buf[17] = 0x40; /* Not writable, is readable */ |
| stw_be_p(buf + 18, 2048 + 4); |
| |
| /* Size of buffer, not including 2 byte size field */ |
| stw_be_p(buf, 16 + 2); |
| |
| /* data written + 4 byte header */ |
| return (16 + 4); |
| |
| default: /* TODO: formats beyond DVD-ROM requires */ |
| return -ASC_INV_FIELD_IN_CMD_PACKET; |
| } |
| } |
| |
| static unsigned int event_status_media(IDEState *s, |
| uint8_t *buf) |
| { |
| uint8_t event_code, media_status; |
| |
| media_status = 0; |
| if (s->tray_open) { |
| media_status = MS_TRAY_OPEN; |
| } else if (blk_is_inserted(s->blk)) { |
| media_status = MS_MEDIA_PRESENT; |
| } |
| |
| /* Event notification descriptor */ |
| event_code = MEC_NO_CHANGE; |
| if (media_status != MS_TRAY_OPEN) { |
| if (s->events.new_media) { |
| event_code = MEC_NEW_MEDIA; |
| s->events.new_media = false; |
| } else if (s->events.eject_request) { |
| event_code = MEC_EJECT_REQUESTED; |
| s->events.eject_request = false; |
| } |
| } |
| |
| buf[4] = event_code; |
| buf[5] = media_status; |
| |
| /* These fields are reserved, just clear them. */ |
| buf[6] = 0; |
| buf[7] = 0; |
| |
| return 8; /* We wrote to 4 extra bytes from the header */ |
| } |
| |
| /* |
| * Before transferring data or otherwise signalling acceptance of a command |
| * marked CONDDATA, we must check the validity of the byte_count_limit. |
| */ |
| static bool validate_bcl(IDEState *s) |
| { |
| /* TODO: Check IDENTIFY data word 125 for defacult BCL (currently 0) */ |
| if (s->atapi_dma || atapi_byte_count_limit(s)) { |
| return true; |
| } |
| |
| /* TODO: Move abort back into core.c and introduce proper error flow between |
| * ATAPI layer and IDE core layer */ |
| ide_abort_command(s); |
| return false; |
| } |
| |
| static void cmd_get_event_status_notification(IDEState *s, |
| uint8_t *buf) |
| { |
| const uint8_t *packet = buf; |
| |
| struct { |
| uint8_t opcode; |
| uint8_t polled; /* lsb bit is polled; others are reserved */ |
| uint8_t reserved2[2]; |
| uint8_t class; |
| uint8_t reserved3[2]; |
| uint16_t len; |
| uint8_t control; |
| } QEMU_PACKED *gesn_cdb; |
| |
| struct { |
| uint16_t len; |
| uint8_t notification_class; |
| uint8_t supported_events; |
| } QEMU_PACKED *gesn_event_header; |
| unsigned int max_len, used_len; |
| |
| gesn_cdb = (void *)packet; |
| gesn_event_header = (void *)buf; |
| |
| max_len = be16_to_cpu(gesn_cdb->len); |
| |
| /* It is fine by the MMC spec to not support async mode operations */ |
| if (!(gesn_cdb->polled & 0x01)) { /* asynchronous mode */ |
| /* Only polling is supported, asynchronous mode is not. */ |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, |
| ASC_INV_FIELD_IN_CMD_PACKET); |
| return; |
| } |
| |
| /* polling mode operation */ |
| |
| /* |
| * These are the supported events. |
| * |
| * We currently only support requests of the 'media' type. |
| * Notification class requests and supported event classes are bitmasks, |
| * but they are build from the same values as the "notification class" |
| * field. |
| */ |
| gesn_event_header->supported_events = 1 << GESN_MEDIA; |
| |
| /* |
| * We use |= below to set the class field; other bits in this byte |
| * are reserved now but this is useful to do if we have to use the |
| * reserved fields later. |
| */ |
| gesn_event_header->notification_class = 0; |
| |
| /* |
| * Responses to requests are to be based on request priority. The |
| * notification_class_request_type enum above specifies the |
| * priority: upper elements are higher prio than lower ones. |
| */ |
| if (gesn_cdb->class & (1 << GESN_MEDIA)) { |
| gesn_event_header->notification_class |= GESN_MEDIA; |
| used_len = event_status_media(s, buf); |
| } else { |
| gesn_event_header->notification_class = 0x80; /* No event available */ |
| used_len = sizeof(*gesn_event_header); |
| } |
| gesn_event_header->len = cpu_to_be16(used_len |
| - sizeof(*gesn_event_header)); |
| ide_atapi_cmd_reply(s, used_len, max_len); |
| } |
| |
| static void cmd_request_sense(IDEState *s, uint8_t *buf) |
| { |
| int max_len = buf[4]; |
| |
| memset(buf, 0, 18); |
| buf[0] = 0x70 | (1 << 7); |
| buf[2] = s->sense_key; |
| buf[7] = 10; |
| buf[12] = s->asc; |
| |
| if (s->sense_key == UNIT_ATTENTION) { |
| s->sense_key = NO_SENSE; |
| } |
| |
| ide_atapi_cmd_reply(s, 18, max_len); |
| } |
| |
| static void cmd_inquiry(IDEState *s, uint8_t *buf) |
| { |
| uint8_t page_code = buf[2]; |
| int max_len = buf[4]; |
| |
| unsigned idx = 0; |
| unsigned size_idx; |
| unsigned preamble_len; |
| |
| /* If the EVPD (Enable Vital Product Data) bit is set in byte 1, |
| * we are being asked for a specific page of info indicated by byte 2. */ |
| if (buf[1] & 0x01) { |
| preamble_len = 4; |
| size_idx = 3; |
| |
| buf[idx++] = 0x05; /* CD-ROM */ |
| buf[idx++] = page_code; /* Page Code */ |
| buf[idx++] = 0x00; /* reserved */ |
| idx++; /* length (set later) */ |
| |
| switch (page_code) { |
| case 0x00: |
| /* Supported Pages: List of supported VPD responses. */ |
| buf[idx++] = 0x00; /* 0x00: Supported Pages, and: */ |
| buf[idx++] = 0x83; /* 0x83: Device Identification. */ |
| break; |
| |
| case 0x83: |
| /* Device Identification. Each entry is optional, but the entries |
| * included here are modeled after libata's VPD responses. |
| * If the response is given, at least one entry must be present. */ |
| |
| /* Entry 1: Serial */ |
| if (idx + 24 > max_len) { |
| /* Not enough room for even the first entry: */ |
| /* 4 byte header + 20 byte string */ |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, |
| ASC_DATA_PHASE_ERROR); |
| return; |
| } |
| buf[idx++] = 0x02; /* Ascii */ |
| buf[idx++] = 0x00; /* Vendor Specific */ |
| buf[idx++] = 0x00; |
| buf[idx++] = 20; /* Remaining length */ |
| padstr8(buf + idx, 20, s->drive_serial_str); |
| idx += 20; |
| |
| /* Entry 2: Drive Model and Serial */ |
| if (idx + 72 > max_len) { |
| /* 4 (header) + 8 (vendor) + 60 (model & serial) */ |
| goto out; |
| } |
| buf[idx++] = 0x02; /* Ascii */ |
| buf[idx++] = 0x01; /* T10 Vendor */ |
| buf[idx++] = 0x00; |
| buf[idx++] = 68; |
| padstr8(buf + idx, 8, "ATA"); /* Generic T10 vendor */ |
| idx += 8; |
| padstr8(buf + idx, 40, s->drive_model_str); |
| idx += 40; |
| padstr8(buf + idx, 20, s->drive_serial_str); |
| idx += 20; |
| |
| /* Entry 3: WWN */ |
| if (s->wwn && (idx + 12 <= max_len)) { |
| /* 4 byte header + 8 byte wwn */ |
| buf[idx++] = 0x01; /* Binary */ |
| buf[idx++] = 0x03; /* NAA */ |
| buf[idx++] = 0x00; |
| buf[idx++] = 0x08; |
| stq_be_p(&buf[idx], s->wwn); |
| idx += 8; |
| } |
| break; |
| |
| default: |
| /* SPC-3, revision 23 sec. 6.4 */ |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, |
| ASC_INV_FIELD_IN_CMD_PACKET); |
| return; |
| } |
| } else { |
| preamble_len = 5; |
| size_idx = 4; |
| |
| buf[0] = 0x05; /* CD-ROM */ |
| buf[1] = 0x80; /* removable */ |
| buf[2] = 0x00; /* ISO */ |
| buf[3] = 0x21; /* ATAPI-2 (XXX: put ATAPI-4 ?) */ |
| /* buf[size_idx] set below. */ |
| buf[5] = 0; /* reserved */ |
| buf[6] = 0; /* reserved */ |
| buf[7] = 0; /* reserved */ |
| padstr8(buf + 8, 8, "QEMU"); |
| padstr8(buf + 16, 16, "QEMU DVD-ROM"); |
| padstr8(buf + 32, 4, s->version); |
| idx = 36; |
| } |
| |
| out: |
| buf[size_idx] = idx - preamble_len; |
| ide_atapi_cmd_reply(s, idx, max_len); |
| } |
| |
| static void cmd_get_configuration(IDEState *s, uint8_t *buf) |
| { |
| uint32_t len; |
| uint8_t index = 0; |
| int max_len; |
| |
| /* only feature 0 is supported */ |
| if (buf[2] != 0 || buf[3] != 0) { |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, |
| ASC_INV_FIELD_IN_CMD_PACKET); |
| return; |
| } |
| |
| /* XXX: could result in alignment problems in some architectures */ |
| max_len = lduw_be_p(buf + 7); |
| |
| /* |
| * XXX: avoid overflow for io_buffer if max_len is bigger than |
| * the size of that buffer (dimensioned to max number of |
| * sectors to transfer at once) |
| * |
| * Only a problem if the feature/profiles grow. |
| */ |
| if (max_len > BDRV_SECTOR_SIZE) { |
| /* XXX: assume 1 sector */ |
| max_len = BDRV_SECTOR_SIZE; |
| } |
| |
| memset(buf, 0, max_len); |
| /* |
| * the number of sectors from the media tells us which profile |
| * to use as current. 0 means there is no media |
| */ |
| if (media_is_dvd(s)) { |
| stw_be_p(buf + 6, MMC_PROFILE_DVD_ROM); |
| } else if (media_is_cd(s)) { |
| stw_be_p(buf + 6, MMC_PROFILE_CD_ROM); |
| } |
| |
| buf[10] = 0x02 | 0x01; /* persistent and current */ |
| len = 12; /* headers: 8 + 4 */ |
| len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_DVD_ROM); |
| len += ide_atapi_set_profile(buf, &index, MMC_PROFILE_CD_ROM); |
| stl_be_p(buf, len - 4); /* data length */ |
| |
| ide_atapi_cmd_reply(s, len, max_len); |
| } |
| |
| static void cmd_mode_sense(IDEState *s, uint8_t *buf) |
| { |
| int action, code; |
| int max_len; |
| |
| max_len = lduw_be_p(buf + 7); |
| action = buf[2] >> 6; |
| code = buf[2] & 0x3f; |
| |
| switch(action) { |
| case 0: /* current values */ |
| switch(code) { |
| case MODE_PAGE_R_W_ERROR: /* error recovery */ |
| stw_be_p(&buf[0], 16 - 2); |
| buf[2] = 0x70; |
| buf[3] = 0; |
| buf[4] = 0; |
| buf[5] = 0; |
| buf[6] = 0; |
| buf[7] = 0; |
| |
| buf[8] = MODE_PAGE_R_W_ERROR; |
| buf[9] = 16 - 10; |
| buf[10] = 0x00; |
| buf[11] = 0x05; |
| buf[12] = 0x00; |
| buf[13] = 0x00; |
| buf[14] = 0x00; |
| buf[15] = 0x00; |
| ide_atapi_cmd_reply(s, 16, max_len); |
| break; |
| case MODE_PAGE_AUDIO_CTL: |
| stw_be_p(&buf[0], 24 - 2); |
| buf[2] = 0x70; |
| buf[3] = 0; |
| buf[4] = 0; |
| buf[5] = 0; |
| buf[6] = 0; |
| buf[7] = 0; |
| |
| buf[8] = MODE_PAGE_AUDIO_CTL; |
| buf[9] = 24 - 10; |
| /* Fill with CDROM audio volume */ |
| buf[17] = 0; |
| buf[19] = 0; |
| buf[21] = 0; |
| buf[23] = 0; |
| |
| ide_atapi_cmd_reply(s, 24, max_len); |
| break; |
| case MODE_PAGE_CAPABILITIES: |
| stw_be_p(&buf[0], 30 - 2); |
| buf[2] = 0x70; |
| buf[3] = 0; |
| buf[4] = 0; |
| buf[5] = 0; |
| buf[6] = 0; |
| buf[7] = 0; |
| |
| buf[8] = MODE_PAGE_CAPABILITIES; |
| buf[9] = 30 - 10; |
| buf[10] = 0x3b; /* read CDR/CDRW/DVDROM/DVDR/DVDRAM */ |
| buf[11] = 0x00; |
| |
| /* Claim PLAY_AUDIO capability (0x01) since some Linux |
| code checks for this to automount media. */ |
| buf[12] = 0x71; |
| buf[13] = 3 << 5; |
| buf[14] = (1 << 0) | (1 << 3) | (1 << 5); |
| if (s->tray_locked) { |
| buf[14] |= 1 << 1; |
| } |
| buf[15] = 0x00; /* No volume & mute control, no changer */ |
| stw_be_p(&buf[16], 704); /* 4x read speed */ |
| buf[18] = 0; /* Two volume levels */ |
| buf[19] = 2; |
| stw_be_p(&buf[20], 512); /* 512k buffer */ |
| stw_be_p(&buf[22], 704); /* 4x read speed current */ |
| buf[24] = 0; |
| buf[25] = 0; |
| buf[26] = 0; |
| buf[27] = 0; |
| buf[28] = 0; |
| buf[29] = 0; |
| ide_atapi_cmd_reply(s, 30, max_len); |
| break; |
| default: |
| goto error_cmd; |
| } |
| break; |
| case 1: /* changeable values */ |
| goto error_cmd; |
| case 2: /* default values */ |
| goto error_cmd; |
| default: |
| case 3: /* saved values */ |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, |
| ASC_SAVING_PARAMETERS_NOT_SUPPORTED); |
| break; |
| } |
| return; |
| |
| error_cmd: |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_INV_FIELD_IN_CMD_PACKET); |
| } |
| |
| static void cmd_test_unit_ready(IDEState *s, uint8_t *buf) |
| { |
| /* Not Ready Conditions are already handled in ide_atapi_cmd(), so if we |
| * come here, we know that it's ready. */ |
| ide_atapi_cmd_ok(s); |
| } |
| |
| static void cmd_prevent_allow_medium_removal(IDEState *s, uint8_t* buf) |
| { |
| s->tray_locked = buf[4] & 1; |
| blk_lock_medium(s->blk, buf[4] & 1); |
| ide_atapi_cmd_ok(s); |
| } |
| |
| static void cmd_read(IDEState *s, uint8_t* buf) |
| { |
| unsigned int nb_sectors, lba; |
| |
| /* Total logical sectors of ATAPI_SECTOR_SIZE(=2048) bytes */ |
| uint64_t total_sectors = s->nb_sectors >> 2; |
| |
| if (buf[0] == GPCMD_READ_10) { |
| nb_sectors = lduw_be_p(buf + 7); |
| } else { |
| nb_sectors = ldl_be_p(buf + 6); |
| } |
| if (nb_sectors == 0) { |
| ide_atapi_cmd_ok(s); |
| return; |
| } |
| |
| lba = ldl_be_p(buf + 2); |
| if (lba >= total_sectors || lba + nb_sectors - 1 >= total_sectors) { |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR); |
| return; |
| } |
| |
| ide_atapi_cmd_read(s, lba, nb_sectors, 2048); |
| } |
| |
| static void cmd_read_cd(IDEState *s, uint8_t* buf) |
| { |
| unsigned int nb_sectors, lba, transfer_request; |
| |
| /* Total logical sectors of ATAPI_SECTOR_SIZE(=2048) bytes */ |
| uint64_t total_sectors = s->nb_sectors >> 2; |
| |
| nb_sectors = (buf[6] << 16) | (buf[7] << 8) | buf[8]; |
| if (nb_sectors == 0) { |
| ide_atapi_cmd_ok(s); |
| return; |
| } |
| |
| lba = ldl_be_p(buf + 2); |
| if (lba >= total_sectors || lba + nb_sectors - 1 >= total_sectors) { |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR); |
| return; |
| } |
| |
| transfer_request = buf[9] & 0xf8; |
| if (transfer_request == 0x00) { |
| /* nothing */ |
| ide_atapi_cmd_ok(s); |
| return; |
| } |
| |
| /* Check validity of BCL before transferring data */ |
| if (!validate_bcl(s)) { |
| return; |
| } |
| |
| switch (transfer_request) { |
| case 0x10: |
| /* normal read */ |
| ide_atapi_cmd_read(s, lba, nb_sectors, 2048); |
| break; |
| case 0xf8: |
| /* read all data */ |
| ide_atapi_cmd_read(s, lba, nb_sectors, 2352); |
| break; |
| default: |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, |
| ASC_INV_FIELD_IN_CMD_PACKET); |
| break; |
| } |
| } |
| |
| static void cmd_seek(IDEState *s, uint8_t* buf) |
| { |
| unsigned int lba; |
| uint64_t total_sectors = s->nb_sectors >> 2; |
| |
| lba = ldl_be_p(buf + 2); |
| if (lba >= total_sectors) { |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_LOGICAL_BLOCK_OOR); |
| return; |
| } |
| |
| ide_atapi_cmd_ok(s); |
| } |
| |
| static void cmd_start_stop_unit(IDEState *s, uint8_t* buf) |
| { |
| int sense; |
| bool start = buf[4] & 1; |
| bool loej = buf[4] & 2; /* load on start, eject on !start */ |
| int pwrcnd = buf[4] & 0xf0; |
| |
| if (pwrcnd) { |
| /* eject/load only happens for power condition == 0 */ |
| ide_atapi_cmd_ok(s); |
| return; |
| } |
| |
| if (loej) { |
| if (!start && !s->tray_open && s->tray_locked) { |
| sense = blk_is_inserted(s->blk) |
| ? NOT_READY : ILLEGAL_REQUEST; |
| ide_atapi_cmd_error(s, sense, ASC_MEDIA_REMOVAL_PREVENTED); |
| return; |
| } |
| |
| if (s->tray_open != !start) { |
| blk_eject(s->blk, !start); |
| s->tray_open = !start; |
| } |
| } |
| |
| ide_atapi_cmd_ok(s); |
| } |
| |
| static void cmd_mechanism_status(IDEState *s, uint8_t* buf) |
| { |
| int max_len = lduw_be_p(buf + 8); |
| |
| stw_be_p(buf, 0); |
| /* no current LBA */ |
| buf[2] = 0; |
| buf[3] = 0; |
| buf[4] = 0; |
| buf[5] = 1; |
| stw_be_p(buf + 6, 0); |
| ide_atapi_cmd_reply(s, 8, max_len); |
| } |
| |
| static void cmd_read_toc_pma_atip(IDEState *s, uint8_t* buf) |
| { |
| int format, msf, start_track, len; |
| int max_len; |
| uint64_t total_sectors = s->nb_sectors >> 2; |
| |
| max_len = lduw_be_p(buf + 7); |
| format = buf[9] >> 6; |
| msf = (buf[1] >> 1) & 1; |
| start_track = buf[6]; |
| |
| switch(format) { |
| case 0: |
| len = cdrom_read_toc(total_sectors, buf, msf, start_track); |
| if (len < 0) |
| goto error_cmd; |
| ide_atapi_cmd_reply(s, len, max_len); |
| break; |
| case 1: |
| /* multi session : only a single session defined */ |
| memset(buf, 0, 12); |
| buf[1] = 0x0a; |
| buf[2] = 0x01; |
| buf[3] = 0x01; |
| ide_atapi_cmd_reply(s, 12, max_len); |
| break; |
| case 2: |
| len = cdrom_read_toc_raw(total_sectors, buf, msf, start_track); |
| if (len < 0) |
| goto error_cmd; |
| ide_atapi_cmd_reply(s, len, max_len); |
| break; |
| default: |
| error_cmd: |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, |
| ASC_INV_FIELD_IN_CMD_PACKET); |
| } |
| } |
| |
| static void cmd_read_cdvd_capacity(IDEState *s, uint8_t* buf) |
| { |
| uint64_t total_sectors = s->nb_sectors >> 2; |
| |
| /* NOTE: it is really the number of sectors minus 1 */ |
| stl_be_p(buf, total_sectors - 1); |
| stl_be_p(buf + 4, 2048); |
| ide_atapi_cmd_reply(s, 8, 8); |
| } |
| |
| static void cmd_read_disc_information(IDEState *s, uint8_t* buf) |
| { |
| uint8_t type = buf[1] & 7; |
| uint32_t max_len = lduw_be_p(buf + 7); |
| |
| /* Types 1/2 are only defined for Blu-Ray. */ |
| if (type != 0) { |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, |
| ASC_INV_FIELD_IN_CMD_PACKET); |
| return; |
| } |
| |
| memset(buf, 0, 34); |
| buf[1] = 32; |
| buf[2] = 0xe; /* last session complete, disc finalized */ |
| buf[3] = 1; /* first track on disc */ |
| buf[4] = 1; /* # of sessions */ |
| buf[5] = 1; /* first track of last session */ |
| buf[6] = 1; /* last track of last session */ |
| buf[7] = 0x20; /* unrestricted use */ |
| buf[8] = 0x00; /* CD-ROM or DVD-ROM */ |
| /* 9-10-11: most significant byte corresponding bytes 4-5-6 */ |
| /* 12-23: not meaningful for CD-ROM or DVD-ROM */ |
| /* 24-31: disc bar code */ |
| /* 32: disc application code */ |
| /* 33: number of OPC tables */ |
| |
| ide_atapi_cmd_reply(s, 34, max_len); |
| } |
| |
| static void cmd_read_dvd_structure(IDEState *s, uint8_t* buf) |
| { |
| int max_len; |
| int media = buf[1]; |
| int format = buf[7]; |
| int ret; |
| |
| max_len = lduw_be_p(buf + 8); |
| |
| if (format < 0xff) { |
| if (media_is_cd(s)) { |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, |
| ASC_INCOMPATIBLE_FORMAT); |
| return; |
| } else if (!media_present(s)) { |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, |
| ASC_INV_FIELD_IN_CMD_PACKET); |
| return; |
| } |
| } |
| |
| memset(buf, 0, max_len > IDE_DMA_BUF_SECTORS * BDRV_SECTOR_SIZE + 4 ? |
| IDE_DMA_BUF_SECTORS * BDRV_SECTOR_SIZE + 4 : max_len); |
| |
| switch (format) { |
| case 0x00 ... 0x7f: |
| case 0xff: |
| if (media == 0) { |
| ret = ide_dvd_read_structure(s, format, buf, buf); |
| |
| if (ret < 0) { |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, -ret); |
| } else { |
| ide_atapi_cmd_reply(s, ret, max_len); |
| } |
| |
| break; |
| } |
| /* TODO: BD support, fall through for now */ |
| |
| /* Generic disk structures */ |
| case 0x80: /* TODO: AACS volume identifier */ |
| case 0x81: /* TODO: AACS media serial number */ |
| case 0x82: /* TODO: AACS media identifier */ |
| case 0x83: /* TODO: AACS media key block */ |
| case 0x90: /* TODO: List of recognized format layers */ |
| case 0xc0: /* TODO: Write protection status */ |
| default: |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, |
| ASC_INV_FIELD_IN_CMD_PACKET); |
| break; |
| } |
| } |
| |
| static void cmd_set_speed(IDEState *s, uint8_t* buf) |
| { |
| ide_atapi_cmd_ok(s); |
| } |
| |
| enum { |
| /* |
| * Only commands flagged as ALLOW_UA are allowed to run under a |
| * unit attention condition. (See MMC-5, section 4.1.6.1) |
| */ |
| ALLOW_UA = 0x01, |
| |
| /* |
| * Commands flagged with CHECK_READY can only execute if a medium is present. |
| * Otherwise they report the Not Ready Condition. (See MMC-5, section |
| * 4.1.8) |
| */ |
| CHECK_READY = 0x02, |
| |
| /* |
| * Commands flagged with NONDATA do not in any circumstances return |
| * any data via ide_atapi_cmd_reply. These commands are exempt from |
| * the normal byte_count_limit constraints. |
| * See ATA8-ACS3 "7.21.5 Byte Count Limit" |
| */ |
| NONDATA = 0x04, |
| |
| /* |
| * CONDDATA implies a command that transfers data only conditionally based |
| * on the presence of suboptions. It should be exempt from the BCL check at |
| * command validation time, but it needs to be checked at the command |
| * handler level instead. |
| */ |
| CONDDATA = 0x08, |
| }; |
| |
| static const struct AtapiCmd { |
| void (*handler)(IDEState *s, uint8_t *buf); |
| int flags; |
| } atapi_cmd_table[0x100] = { |
| [ 0x00 ] = { cmd_test_unit_ready, CHECK_READY | NONDATA }, |
| [ 0x03 ] = { cmd_request_sense, ALLOW_UA }, |
| [ 0x12 ] = { cmd_inquiry, ALLOW_UA }, |
| [ 0x1b ] = { cmd_start_stop_unit, NONDATA }, /* [1] */ |
| [ 0x1e ] = { cmd_prevent_allow_medium_removal, NONDATA }, |
| [ 0x25 ] = { cmd_read_cdvd_capacity, CHECK_READY }, |
| [ 0x28 ] = { cmd_read, /* (10) */ CHECK_READY }, |
| [ 0x2b ] = { cmd_seek, CHECK_READY | NONDATA }, |
| [ 0x43 ] = { cmd_read_toc_pma_atip, CHECK_READY }, |
| [ 0x46 ] = { cmd_get_configuration, ALLOW_UA }, |
| [ 0x4a ] = { cmd_get_event_status_notification, ALLOW_UA }, |
| [ 0x51 ] = { cmd_read_disc_information, CHECK_READY }, |
| [ 0x5a ] = { cmd_mode_sense, /* (10) */ 0 }, |
| [ 0xa8 ] = { cmd_read, /* (12) */ CHECK_READY }, |
| [ 0xad ] = { cmd_read_dvd_structure, CHECK_READY }, |
| [ 0xbb ] = { cmd_set_speed, NONDATA }, |
| [ 0xbd ] = { cmd_mechanism_status, 0 }, |
| [ 0xbe ] = { cmd_read_cd, CHECK_READY | CONDDATA }, |
| /* [1] handler detects and reports not ready condition itself */ |
| }; |
| |
| void ide_atapi_cmd(IDEState *s) |
| { |
| uint8_t *buf = s->io_buffer; |
| const struct AtapiCmd *cmd = &atapi_cmd_table[s->io_buffer[0]]; |
| |
| trace_ide_atapi_cmd(s, s->io_buffer[0]); |
| |
| if (trace_event_get_state_backends(TRACE_IDE_ATAPI_CMD_PACKET)) { |
| /* Each pretty-printed byte needs two bytes and a space; */ |
| char *ppacket = g_malloc(ATAPI_PACKET_SIZE * 3 + 1); |
| int i; |
| for (i = 0; i < ATAPI_PACKET_SIZE; i++) { |
| sprintf(ppacket + (i * 3), "%02x ", buf[i]); |
| } |
| trace_ide_atapi_cmd_packet(s, s->lcyl | (s->hcyl << 8), ppacket); |
| g_free(ppacket); |
| } |
| |
| /* |
| * If there's a UNIT_ATTENTION condition pending, only command flagged with |
| * ALLOW_UA are allowed to complete. with other commands getting a CHECK |
| * condition response unless a higher priority status, defined by the drive |
| * here, is pending. |
| */ |
| if (s->sense_key == UNIT_ATTENTION && !(cmd->flags & ALLOW_UA)) { |
| ide_atapi_cmd_check_status(s); |
| return; |
| } |
| /* |
| * When a CD gets changed, we have to report an ejected state and |
| * then a loaded state to guests so that they detect tray |
| * open/close and media change events. Guests that do not use |
| * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close |
| * states rely on this behavior. |
| */ |
| if (!(cmd->flags & ALLOW_UA) && |
| !s->tray_open && blk_is_inserted(s->blk) && s->cdrom_changed) { |
| |
| if (s->cdrom_changed == 1) { |
| ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT); |
| s->cdrom_changed = 2; |
| } else { |
| ide_atapi_cmd_error(s, UNIT_ATTENTION, ASC_MEDIUM_MAY_HAVE_CHANGED); |
| s->cdrom_changed = 0; |
| } |
| |
| return; |
| } |
| |
| /* Report a Not Ready condition if appropriate for the command */ |
| if ((cmd->flags & CHECK_READY) && |
| (!media_present(s) || !blk_is_inserted(s->blk))) |
| { |
| ide_atapi_cmd_error(s, NOT_READY, ASC_MEDIUM_NOT_PRESENT); |
| return; |
| } |
| |
| /* Commands that don't transfer DATA permit the byte_count_limit to be 0. |
| * If this is a data-transferring PIO command and BCL is 0, |
| * we abort at the /ATA/ level, not the ATAPI level. |
| * See ATA8 ACS3 section 7.17.6.49 and 7.21.5 */ |
| if (cmd->handler && !(cmd->flags & (NONDATA | CONDDATA))) { |
| if (!validate_bcl(s)) { |
| return; |
| } |
| } |
| |
| /* Execute the command */ |
| if (cmd->handler) { |
| cmd->handler(s, buf); |
| return; |
| } |
| |
| ide_atapi_cmd_error(s, ILLEGAL_REQUEST, ASC_ILLEGAL_OPCODE); |
| } |