| /* |
| * QTest testcase for the Nuvoton NPCM7xx Timer |
| * |
| * Copyright 2020 Google LLC |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/timer.h" |
| #include "libqtest-single.h" |
| |
| #define TIM_REF_HZ (25000000) |
| |
| /* Bits in TCSRx */ |
| #define CEN BIT(30) |
| #define IE BIT(29) |
| #define MODE_ONESHOT (0 << 27) |
| #define MODE_PERIODIC (1 << 27) |
| #define CRST BIT(26) |
| #define CACT BIT(25) |
| #define PRESCALE(x) (x) |
| |
| /* Registers shared between all timers in a module. */ |
| #define TISR 0x18 |
| #define WTCR 0x1c |
| # define WTCLK(x) ((x) << 10) |
| |
| /* Power-on default; used to re-initialize timers before each test. */ |
| #define TCSR_DEFAULT PRESCALE(5) |
| |
| /* Register offsets for a timer within a timer block. */ |
| typedef struct Timer { |
| unsigned int tcsr_offset; |
| unsigned int ticr_offset; |
| unsigned int tdr_offset; |
| } Timer; |
| |
| /* A timer block containing 5 timers. */ |
| typedef struct TimerBlock { |
| int irq_base; |
| uint64_t base_addr; |
| } TimerBlock; |
| |
| /* Testdata for testing a particular timer within a timer block. */ |
| typedef struct TestData { |
| const TimerBlock *tim; |
| const Timer *timer; |
| } TestData; |
| |
| const TimerBlock timer_block[] = { |
| { |
| .irq_base = 32, |
| .base_addr = 0xf0008000, |
| }, |
| { |
| .irq_base = 37, |
| .base_addr = 0xf0009000, |
| }, |
| { |
| .irq_base = 42, |
| .base_addr = 0xf000a000, |
| }, |
| }; |
| |
| const Timer timer[] = { |
| { |
| .tcsr_offset = 0x00, |
| .ticr_offset = 0x08, |
| .tdr_offset = 0x10, |
| }, { |
| .tcsr_offset = 0x04, |
| .ticr_offset = 0x0c, |
| .tdr_offset = 0x14, |
| }, { |
| .tcsr_offset = 0x20, |
| .ticr_offset = 0x28, |
| .tdr_offset = 0x30, |
| }, { |
| .tcsr_offset = 0x24, |
| .ticr_offset = 0x2c, |
| .tdr_offset = 0x34, |
| }, { |
| .tcsr_offset = 0x40, |
| .ticr_offset = 0x48, |
| .tdr_offset = 0x50, |
| }, |
| }; |
| |
| /* Returns the index of the timer block. */ |
| static int tim_index(const TimerBlock *tim) |
| { |
| ptrdiff_t diff = tim - timer_block; |
| |
| g_assert(diff >= 0 && diff < ARRAY_SIZE(timer_block)); |
| |
| return diff; |
| } |
| |
| /* Returns the index of a timer within a timer block. */ |
| static int timer_index(const Timer *t) |
| { |
| ptrdiff_t diff = t - timer; |
| |
| g_assert(diff >= 0 && diff < ARRAY_SIZE(timer)); |
| |
| return diff; |
| } |
| |
| /* Returns the irq line for a given timer. */ |
| static int tim_timer_irq(const TestData *td) |
| { |
| return td->tim->irq_base + timer_index(td->timer); |
| } |
| |
| /* Register read/write accessors. */ |
| |
| static void tim_write(const TestData *td, |
| unsigned int offset, uint32_t value) |
| { |
| writel(td->tim->base_addr + offset, value); |
| } |
| |
| static uint32_t tim_read(const TestData *td, unsigned int offset) |
| { |
| return readl(td->tim->base_addr + offset); |
| } |
| |
| static void tim_write_tcsr(const TestData *td, uint32_t value) |
| { |
| tim_write(td, td->timer->tcsr_offset, value); |
| } |
| |
| static uint32_t tim_read_tcsr(const TestData *td) |
| { |
| return tim_read(td, td->timer->tcsr_offset); |
| } |
| |
| static void tim_write_ticr(const TestData *td, uint32_t value) |
| { |
| tim_write(td, td->timer->ticr_offset, value); |
| } |
| |
| static uint32_t tim_read_ticr(const TestData *td) |
| { |
| return tim_read(td, td->timer->ticr_offset); |
| } |
| |
| static uint32_t tim_read_tdr(const TestData *td) |
| { |
| return tim_read(td, td->timer->tdr_offset); |
| } |
| |
| /* Returns the number of nanoseconds to count the given number of cycles. */ |
| static int64_t tim_calculate_step(uint32_t count, uint32_t prescale) |
| { |
| return (1000000000LL / TIM_REF_HZ) * count * (prescale + 1); |
| } |
| |
| /* Returns a bitmask corresponding to the timer under test. */ |
| static uint32_t tim_timer_bit(const TestData *td) |
| { |
| return BIT(timer_index(td->timer)); |
| } |
| |
| /* Resets all timers to power-on defaults. */ |
| static void tim_reset(const TestData *td) |
| { |
| int i, j; |
| |
| /* Reset all the timers, in case a previous test left a timer running. */ |
| for (i = 0; i < ARRAY_SIZE(timer_block); i++) { |
| for (j = 0; j < ARRAY_SIZE(timer); j++) { |
| writel(timer_block[i].base_addr + timer[j].tcsr_offset, |
| CRST | TCSR_DEFAULT); |
| } |
| writel(timer_block[i].base_addr + TISR, -1); |
| } |
| } |
| |
| /* Verifies the reset state of a timer. */ |
| static void test_reset(gconstpointer test_data) |
| { |
| const TestData *td = test_data; |
| |
| tim_reset(td); |
| |
| g_assert_cmphex(tim_read_tcsr(td), ==, TCSR_DEFAULT); |
| g_assert_cmphex(tim_read_ticr(td), ==, 0); |
| g_assert_cmphex(tim_read_tdr(td), ==, 0); |
| g_assert_cmphex(tim_read(td, TISR), ==, 0); |
| g_assert_cmphex(tim_read(td, WTCR), ==, WTCLK(1)); |
| } |
| |
| /* Verifies that CRST wins if both CEN and CRST are set. */ |
| static void test_reset_overrides_enable(gconstpointer test_data) |
| { |
| const TestData *td = test_data; |
| |
| tim_reset(td); |
| |
| /* CRST should force CEN to 0 */ |
| tim_write_tcsr(td, CEN | CRST | TCSR_DEFAULT); |
| |
| g_assert_cmphex(tim_read_tcsr(td), ==, TCSR_DEFAULT); |
| g_assert_cmphex(tim_read_tdr(td), ==, 0); |
| g_assert_cmphex(tim_read(td, TISR), ==, 0); |
| } |
| |
| /* Verifies the behavior when CEN is set and then cleared. */ |
| static void test_oneshot_enable_then_disable(gconstpointer test_data) |
| { |
| const TestData *td = test_data; |
| |
| tim_reset(td); |
| |
| /* Enable the timer with zero initial count, then disable it again. */ |
| tim_write_tcsr(td, CEN | TCSR_DEFAULT); |
| tim_write_tcsr(td, TCSR_DEFAULT); |
| |
| g_assert_cmphex(tim_read_tcsr(td), ==, TCSR_DEFAULT); |
| g_assert_cmphex(tim_read_tdr(td), ==, 0); |
| /* Timer interrupt flag should be set, but interrupts are not enabled. */ |
| g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td)); |
| g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td))); |
| } |
| |
| /* Verifies that a one-shot timer fires when expected with prescaler 5. */ |
| static void test_oneshot_ps5(gconstpointer test_data) |
| { |
| const TestData *td = test_data; |
| unsigned int count = 256; |
| unsigned int ps = 5; |
| |
| tim_reset(td); |
| |
| tim_write_ticr(td, count); |
| tim_write_tcsr(td, CEN | PRESCALE(ps)); |
| g_assert_cmphex(tim_read_tcsr(td), ==, CEN | CACT | PRESCALE(ps)); |
| g_assert_cmpuint(tim_read_tdr(td), ==, count); |
| |
| clock_step(tim_calculate_step(count, ps) - 1); |
| |
| g_assert_cmphex(tim_read_tcsr(td), ==, CEN | CACT | PRESCALE(ps)); |
| g_assert_cmpuint(tim_read_tdr(td), <, count); |
| g_assert_cmphex(tim_read(td, TISR), ==, 0); |
| |
| clock_step(1); |
| |
| g_assert_cmphex(tim_read_tcsr(td), ==, PRESCALE(ps)); |
| g_assert_cmpuint(tim_read_tdr(td), ==, count); |
| g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td)); |
| g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td))); |
| |
| /* Clear the interrupt flag. */ |
| tim_write(td, TISR, tim_timer_bit(td)); |
| g_assert_cmphex(tim_read(td, TISR), ==, 0); |
| g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td))); |
| |
| /* Verify that this isn't a periodic timer. */ |
| clock_step(2 * tim_calculate_step(count, ps)); |
| g_assert_cmphex(tim_read(td, TISR), ==, 0); |
| g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td))); |
| } |
| |
| /* Verifies that a one-shot timer fires when expected with prescaler 0. */ |
| static void test_oneshot_ps0(gconstpointer test_data) |
| { |
| const TestData *td = test_data; |
| unsigned int count = 1; |
| unsigned int ps = 0; |
| |
| tim_reset(td); |
| |
| tim_write_ticr(td, count); |
| tim_write_tcsr(td, CEN | PRESCALE(ps)); |
| g_assert_cmphex(tim_read_tcsr(td), ==, CEN | CACT | PRESCALE(ps)); |
| g_assert_cmpuint(tim_read_tdr(td), ==, count); |
| |
| clock_step(tim_calculate_step(count, ps) - 1); |
| |
| g_assert_cmphex(tim_read_tcsr(td), ==, CEN | CACT | PRESCALE(ps)); |
| g_assert_cmpuint(tim_read_tdr(td), <, count); |
| g_assert_cmphex(tim_read(td, TISR), ==, 0); |
| |
| clock_step(1); |
| |
| g_assert_cmphex(tim_read_tcsr(td), ==, PRESCALE(ps)); |
| g_assert_cmpuint(tim_read_tdr(td), ==, count); |
| g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td)); |
| g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td))); |
| } |
| |
| /* Verifies that a one-shot timer fires when expected with highest prescaler. */ |
| static void test_oneshot_ps255(gconstpointer test_data) |
| { |
| const TestData *td = test_data; |
| unsigned int count = (1U << 24) - 1; |
| unsigned int ps = 255; |
| |
| tim_reset(td); |
| |
| tim_write_ticr(td, count); |
| tim_write_tcsr(td, CEN | PRESCALE(ps)); |
| g_assert_cmphex(tim_read_tcsr(td), ==, CEN | CACT | PRESCALE(ps)); |
| g_assert_cmpuint(tim_read_tdr(td), ==, count); |
| |
| clock_step(tim_calculate_step(count, ps) - 1); |
| |
| g_assert_cmphex(tim_read_tcsr(td), ==, CEN | CACT | PRESCALE(ps)); |
| g_assert_cmpuint(tim_read_tdr(td), <, count); |
| g_assert_cmphex(tim_read(td, TISR), ==, 0); |
| |
| clock_step(1); |
| |
| g_assert_cmphex(tim_read_tcsr(td), ==, PRESCALE(ps)); |
| g_assert_cmpuint(tim_read_tdr(td), ==, count); |
| g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td)); |
| g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td))); |
| } |
| |
| /* Verifies that a oneshot timer fires an interrupt when expected. */ |
| static void test_oneshot_interrupt(gconstpointer test_data) |
| { |
| const TestData *td = test_data; |
| unsigned int count = 256; |
| unsigned int ps = 7; |
| |
| tim_reset(td); |
| |
| tim_write_ticr(td, count); |
| tim_write_tcsr(td, IE | CEN | MODE_ONESHOT | PRESCALE(ps)); |
| |
| clock_step_next(); |
| |
| g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td)); |
| g_assert_true(qtest_get_irq(global_qtest, tim_timer_irq(td))); |
| } |
| |
| /* |
| * Verifies that the timer can be paused and later resumed, and it still fires |
| * at the right moment. |
| */ |
| static void test_pause_resume(gconstpointer test_data) |
| { |
| const TestData *td = test_data; |
| unsigned int count = 256; |
| unsigned int ps = 1; |
| |
| tim_reset(td); |
| |
| tim_write_ticr(td, count); |
| tim_write_tcsr(td, IE | CEN | MODE_ONESHOT | PRESCALE(ps)); |
| |
| /* Pause the timer halfway to expiration. */ |
| clock_step(tim_calculate_step(count / 2, ps)); |
| tim_write_tcsr(td, IE | MODE_ONESHOT | PRESCALE(ps)); |
| g_assert_cmpuint(tim_read_tdr(td), ==, count / 2); |
| |
| /* Counter should not advance during the following step. */ |
| clock_step(2 * tim_calculate_step(count, ps)); |
| g_assert_cmpuint(tim_read_tdr(td), ==, count / 2); |
| g_assert_cmphex(tim_read(td, TISR), ==, 0); |
| g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td))); |
| |
| /* Resume the timer and run _almost_ to expiration. */ |
| tim_write_tcsr(td, IE | CEN | MODE_ONESHOT | PRESCALE(ps)); |
| clock_step(tim_calculate_step(count / 2, ps) - 1); |
| g_assert_cmpuint(tim_read_tdr(td), <, count); |
| g_assert_cmphex(tim_read(td, TISR), ==, 0); |
| g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td))); |
| |
| /* Now, run the rest of the way and verify that the interrupt fires. */ |
| clock_step(1); |
| g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td)); |
| g_assert_true(qtest_get_irq(global_qtest, tim_timer_irq(td))); |
| } |
| |
| /* Verifies that the prescaler can be changed while the timer is running. */ |
| static void test_prescaler_change(gconstpointer test_data) |
| { |
| const TestData *td = test_data; |
| unsigned int count = 256; |
| unsigned int ps = 5; |
| |
| tim_reset(td); |
| |
| tim_write_ticr(td, count); |
| tim_write_tcsr(td, CEN | MODE_ONESHOT | PRESCALE(ps)); |
| |
| /* Run a quarter of the way, and change the prescaler. */ |
| clock_step(tim_calculate_step(count / 4, ps)); |
| g_assert_cmpuint(tim_read_tdr(td), ==, 3 * count / 4); |
| ps = 2; |
| tim_write_tcsr(td, CEN | MODE_ONESHOT | PRESCALE(ps)); |
| /* The counter must not change. */ |
| g_assert_cmpuint(tim_read_tdr(td), ==, 3 * count / 4); |
| |
| /* Run another quarter of the way, and change the prescaler again. */ |
| clock_step(tim_calculate_step(count / 4, ps)); |
| g_assert_cmpuint(tim_read_tdr(td), ==, count / 2); |
| ps = 8; |
| tim_write_tcsr(td, CEN | MODE_ONESHOT | PRESCALE(ps)); |
| /* The counter must not change. */ |
| g_assert_cmpuint(tim_read_tdr(td), ==, count / 2); |
| |
| /* Run another quarter of the way, and change the prescaler again. */ |
| clock_step(tim_calculate_step(count / 4, ps)); |
| g_assert_cmpuint(tim_read_tdr(td), ==, count / 4); |
| ps = 0; |
| tim_write_tcsr(td, CEN | MODE_ONESHOT | PRESCALE(ps)); |
| /* The counter must not change. */ |
| g_assert_cmpuint(tim_read_tdr(td), ==, count / 4); |
| |
| /* Run almost to expiration, and verify the timer didn't fire yet. */ |
| clock_step(tim_calculate_step(count / 4, ps) - 1); |
| g_assert_cmpuint(tim_read_tdr(td), <, count); |
| g_assert_cmphex(tim_read(td, TISR), ==, 0); |
| |
| /* Now, run the rest of the way and verify that the timer fires. */ |
| clock_step(1); |
| g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td)); |
| } |
| |
| /* Verifies that a periodic timer automatically restarts after expiration. */ |
| static void test_periodic_no_interrupt(gconstpointer test_data) |
| { |
| const TestData *td = test_data; |
| unsigned int count = 2; |
| unsigned int ps = 3; |
| int i; |
| |
| tim_reset(td); |
| |
| tim_write_ticr(td, count); |
| tim_write_tcsr(td, CEN | MODE_PERIODIC | PRESCALE(ps)); |
| |
| for (i = 0; i < 4; i++) { |
| clock_step_next(); |
| |
| g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td)); |
| g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td))); |
| |
| tim_write(td, TISR, tim_timer_bit(td)); |
| |
| g_assert_cmphex(tim_read(td, TISR), ==, 0); |
| g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td))); |
| } |
| } |
| |
| /* Verifies that a periodict timer fires an interrupt every time it expires. */ |
| static void test_periodic_interrupt(gconstpointer test_data) |
| { |
| const TestData *td = test_data; |
| unsigned int count = 65535; |
| unsigned int ps = 2; |
| int i; |
| |
| tim_reset(td); |
| clock_step_next(); |
| |
| tim_write_ticr(td, count); |
| tim_write_tcsr(td, CEN | IE | MODE_PERIODIC | PRESCALE(ps)); |
| |
| for (i = 0; i < 4; i++) { |
| clock_step_next(); |
| |
| g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td)); |
| g_assert_true(qtest_get_irq(global_qtest, tim_timer_irq(td))); |
| |
| tim_write(td, TISR, tim_timer_bit(td)); |
| |
| g_assert_cmphex(tim_read(td, TISR), ==, 0); |
| g_assert_false(qtest_get_irq(global_qtest, tim_timer_irq(td))); |
| } |
| } |
| |
| /* |
| * Verifies that the timer behaves correctly when disabled right before and |
| * exactly when it's supposed to expire. |
| */ |
| static void test_disable_on_expiration(gconstpointer test_data) |
| { |
| const TestData *td = test_data; |
| unsigned int count = 8; |
| unsigned int ps = 255; |
| |
| tim_reset(td); |
| |
| tim_write_ticr(td, count); |
| tim_write_tcsr(td, CEN | MODE_ONESHOT | PRESCALE(ps)); |
| |
| clock_step(tim_calculate_step(count, ps) - 1); |
| |
| tim_write_tcsr(td, MODE_ONESHOT | PRESCALE(ps)); |
| tim_write_tcsr(td, CEN | MODE_ONESHOT | PRESCALE(ps)); |
| clock_step(1); |
| tim_write_tcsr(td, MODE_ONESHOT | PRESCALE(ps)); |
| g_assert_cmphex(tim_read(td, TISR), ==, tim_timer_bit(td)); |
| } |
| |
| /* |
| * Constructs a name that includes the timer block, timer and testcase name, |
| * and adds the test to the test suite. |
| */ |
| static void tim_add_test(const char *name, const TestData *td, GTestDataFunc fn) |
| { |
| g_autofree char *full_name = g_strdup_printf( |
| "npcm7xx_timer/tim[%d]/timer[%d]/%s", tim_index(td->tim), |
| timer_index(td->timer), name); |
| qtest_add_data_func(full_name, td, fn); |
| } |
| |
| /* Convenience macro for adding a test with a predictable function name. */ |
| #define add_test(name, td) tim_add_test(#name, td, test_##name) |
| |
| int main(int argc, char **argv) |
| { |
| TestData testdata[ARRAY_SIZE(timer_block) * ARRAY_SIZE(timer)]; |
| int ret; |
| int i, j; |
| |
| g_test_init(&argc, &argv, NULL); |
| g_test_set_nonfatal_assertions(); |
| |
| for (i = 0; i < ARRAY_SIZE(timer_block); i++) { |
| for (j = 0; j < ARRAY_SIZE(timer); j++) { |
| TestData *td = &testdata[i * ARRAY_SIZE(timer) + j]; |
| td->tim = &timer_block[i]; |
| td->timer = &timer[j]; |
| |
| add_test(reset, td); |
| add_test(reset_overrides_enable, td); |
| add_test(oneshot_enable_then_disable, td); |
| add_test(oneshot_ps5, td); |
| add_test(oneshot_ps0, td); |
| add_test(oneshot_ps255, td); |
| add_test(oneshot_interrupt, td); |
| add_test(pause_resume, td); |
| add_test(prescaler_change, td); |
| add_test(periodic_no_interrupt, td); |
| add_test(periodic_interrupt, td); |
| add_test(disable_on_expiration, td); |
| } |
| } |
| |
| qtest_start("-machine npcm750-evb"); |
| qtest_irq_intercept_in(global_qtest, "/machine/soc/a9mpcore/gic"); |
| ret = g_test_run(); |
| qtest_end(); |
| |
| return ret; |
| } |