hw/block/dataplane/virtio-blk.c - qemu - Git at Google

 /*
  * Dedicated thread for virtio-blk I/O processing
  *
  * Copyright 2012 IBM, Corp.
  * Copyright 2012 Red Hat, Inc. and/or its affiliates
  *
  * Authors:
  *   Stefan Hajnoczi <stefanha@redhat.com>
  *
  * This work is licensed under the terms of the GNU GPL, version 2 or later.
  * See the COPYING file in the top-level directory.
  *
  */

 #include "qemu/osdep.h"
 #include "qapi/error.h"
 #include "trace.h"
 #include "qemu/iov.h"
 #include "qemu/main-loop.h"
 #include "qemu/thread.h"
 #include "qemu/error-report.h"
 #include "hw/virtio/virtio-blk.h"
 #include "virtio-blk.h"
 #include "block/aio.h"
 #include "hw/virtio/virtio-bus.h"
 #include "qom/object_interfaces.h"

 struct VirtIOBlockDataPlane {
     bool starting;
     bool stopping;

     VirtIOBlkConf *conf;
     VirtIODevice *vdev;

     /* Note that these EventNotifiers are assigned by value.  This is
      * fine as long as you do not call event_notifier_cleanup on them
      * (because you don't own the file descriptor or handle; you just
      * use it).
      */
     IOThread *iothread;
     AioContext *ctx;
 };

 /* Raise an interrupt to signal guest, if necessary */
 void virtio_blk_data_plane_notify(VirtIOBlockDataPlane *s, VirtQueue *vq)
 {
     virtio_notify_irqfd(s->vdev, vq);
 }

 /* Context: QEMU global mutex held */
 bool virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *conf,
                                   VirtIOBlockDataPlane **dataplane,
                                   Error **errp)
 {
     VirtIOBlockDataPlane *s;
     BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
     VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);

     *dataplane = NULL;

     if (conf->iothread) {
         if (!k->set_guest_notifiers || !k->ioeventfd_assign) {
             error_setg(errp,
                        "device is incompatible with iothread "
                        "(transport does not support notifiers)");
             return false;
         }
         if (!virtio_device_ioeventfd_enabled(vdev)) {
             error_setg(errp, "ioeventfd is required for iothread");
             return false;
         }

         /* If dataplane is (re-)enabled while the guest is running there could
          * be block jobs that can conflict.
          */
         if (blk_op_is_blocked(conf->conf.blk, BLOCK_OP_TYPE_DATAPLANE, errp)) {
             error_prepend(errp, "cannot start virtio-blk dataplane: ");
             return false;
         }
     }
     /* Don't try if transport does not support notifiers. */
     if (!virtio_device_ioeventfd_enabled(vdev)) {
         return false;
     }

     s = g_new0(VirtIOBlockDataPlane, 1);
     s->vdev = vdev;
     s->conf = conf;

     if (conf->iothread) {
         s->iothread = conf->iothread;
         object_ref(OBJECT(s->iothread));
         s->ctx = iothread_get_aio_context(s->iothread);
     } else {
         s->ctx = qemu_get_aio_context();
     }

     *dataplane = s;

     return true;
 }

 /* Context: QEMU global mutex held */
 void virtio_blk_data_plane_destroy(VirtIOBlockDataPlane *s)
 {
     VirtIOBlock *vblk;

     if (!s) {
         return;
     }

     vblk = VIRTIO_BLK(s->vdev);
     assert(!vblk->dataplane_started);
     if (s->iothread) {
         object_unref(OBJECT(s->iothread));
     }
     g_free(s);
 }

 /* Context: QEMU global mutex held */
 int virtio_blk_data_plane_start(VirtIODevice *vdev)
 {
     VirtIOBlock *vblk = VIRTIO_BLK(vdev);
     VirtIOBlockDataPlane *s = vblk->dataplane;
     BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vblk)));
     VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
     unsigned i;
     unsigned nvqs = s->conf->num_queues;
     Error *local_err = NULL;
     int r;

     if (vblk->dataplane_started || s->starting) {
         return 0;
     }

     s->starting = true;

     /* Set up guest notifier (irq) */
     r = k->set_guest_notifiers(qbus->parent, nvqs, true);
     if (r != 0) {
         error_report("virtio-blk failed to set guest notifier (%d), "
                      "ensure -accel kvm is set.", r);
         goto fail_guest_notifiers;
     }

     /*
      * Batch all the host notifiers in a single transaction to avoid
      * quadratic time complexity in address_space_update_ioeventfds().
      */
     memory_region_transaction_begin();

     /* Set up virtqueue notify */
     for (i = 0; i < nvqs; i++) {
         r = virtio_bus_set_host_notifier(VIRTIO_BUS(qbus), i, true);
         if (r != 0) {
             int j = i;

             fprintf(stderr, "virtio-blk failed to set host notifier (%d)\n", r);
             while (i--) {
                 virtio_bus_set_host_notifier(VIRTIO_BUS(qbus), i, false);
             }

             /*
              * The transaction expects the ioeventfds to be open when it
              * commits. Do it now, before the cleanup loop.
              */
             memory_region_transaction_commit();

             while (j--) {
                 virtio_bus_cleanup_host_notifier(VIRTIO_BUS(qbus), j);
             }
             goto fail_host_notifiers;
         }
     }

     memory_region_transaction_commit();

     trace_virtio_blk_data_plane_start(s);

     r = blk_set_aio_context(s->conf->conf.blk, s->ctx, &local_err);
     if (r < 0) {
         error_report_err(local_err);
         goto fail_aio_context;
     }

     /* Kick right away to begin processing requests already in vring */
     for (i = 0; i < nvqs; i++) {
         VirtQueue *vq = virtio_get_queue(s->vdev, i);

         event_notifier_set(virtio_queue_get_host_notifier(vq));
     }

     /*
      * These fields must be visible to the IOThread when it processes the
      * virtqueue, otherwise it will think dataplane has not started yet.
      *
      * Make sure ->dataplane_started is false when blk_set_aio_context() is
      * called above so that draining does not cause the host notifier to be
      * detached/attached prematurely.
      */
     s->starting = false;
     vblk->dataplane_started = true;
     smp_wmb(); /* paired with aio_notify_accept() on the read side */

     /* Get this show started by hooking up our callbacks */
     if (!blk_in_drain(s->conf->conf.blk)) {
         for (i = 0; i < nvqs; i++) {
             VirtQueue *vq = virtio_get_queue(s->vdev, i);

             virtio_queue_aio_attach_host_notifier(vq, s->ctx);
         }
     }
     return 0;

   fail_aio_context:
     memory_region_transaction_begin();

     for (i = 0; i < nvqs; i++) {
         virtio_bus_set_host_notifier(VIRTIO_BUS(qbus), i, false);
     }

     memory_region_transaction_commit();

     for (i = 0; i < nvqs; i++) {
         virtio_bus_cleanup_host_notifier(VIRTIO_BUS(qbus), i);
     }
   fail_host_notifiers:
     k->set_guest_notifiers(qbus->parent, nvqs, false);
   fail_guest_notifiers:
     vblk->dataplane_disabled = true;
     s->starting = false;
     return -ENOSYS;
 }

 /* Stop notifications for new requests from guest.
  *
  * Context: BH in IOThread
  */
 static void virtio_blk_data_plane_stop_bh(void *opaque)
 {
     VirtIOBlockDataPlane *s = opaque;
     unsigned i;

     for (i = 0; i < s->conf->num_queues; i++) {
         VirtQueue *vq = virtio_get_queue(s->vdev, i);
         EventNotifier *host_notifier = virtio_queue_get_host_notifier(vq);

         virtio_queue_aio_detach_host_notifier(vq, s->ctx);

         /*
          * Test and clear notifier after disabling event, in case poll callback
          * didn't have time to run.
          */
         virtio_queue_host_notifier_read(host_notifier);
     }
 }

 /* Context: QEMU global mutex held */
 void virtio_blk_data_plane_stop(VirtIODevice *vdev)
 {
     VirtIOBlock *vblk = VIRTIO_BLK(vdev);
     VirtIOBlockDataPlane *s = vblk->dataplane;
     BusState *qbus = qdev_get_parent_bus(DEVICE(vblk));
     VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
     unsigned i;
     unsigned nvqs = s->conf->num_queues;

     if (!vblk->dataplane_started || s->stopping) {
         return;
     }

     /* Better luck next time. */
     if (vblk->dataplane_disabled) {
         vblk->dataplane_disabled = false;
         vblk->dataplane_started = false;
         return;
     }
     s->stopping = true;
     trace_virtio_blk_data_plane_stop(s);

     if (!blk_in_drain(s->conf->conf.blk)) {
         aio_wait_bh_oneshot(s->ctx, virtio_blk_data_plane_stop_bh, s);
     }

     /*
      * Batch all the host notifiers in a single transaction to avoid
      * quadratic time complexity in address_space_update_ioeventfds().
      */
     memory_region_transaction_begin();

     for (i = 0; i < nvqs; i++) {
         virtio_bus_set_host_notifier(VIRTIO_BUS(qbus), i, false);
     }

     /*
      * The transaction expects the ioeventfds to be open when it
      * commits. Do it now, before the cleanup loop.
      */
     memory_region_transaction_commit();

     for (i = 0; i < nvqs; i++) {
         virtio_bus_cleanup_host_notifier(VIRTIO_BUS(qbus), i);
     }

     /*
      * Set ->dataplane_started to false before draining so that host notifiers
      * are not detached/attached anymore.
      */
     vblk->dataplane_started = false;

     /* Wait for virtio_blk_dma_restart_bh() and in flight I/O to complete */
     blk_drain(s->conf->conf.blk);

     /*
      * Try to switch bs back to the QEMU main loop. If other users keep the
      * BlockBackend in the iothread, that's ok
      */
     blk_set_aio_context(s->conf->conf.blk, qemu_get_aio_context(), NULL);

     /* Clean up guest notifier (irq) */
     k->set_guest_notifiers(qbus->parent, nvqs, false);

     s->stopping = false;
 }
	/*
	* Dedicated thread for virtio-blk I/O processing
	*
	* Copyright 2012 IBM, Corp.
	* Copyright 2012 Red Hat, Inc. and/or its affiliates
	*
	* Authors:
	* Stefan Hajnoczi <stefanha@redhat.com>
	*
	* This work is licensed under the terms of the GNU GPL, version 2 or later.
	* See the COPYING file in the top-level directory.
	*
	*/

	#include "qemu/osdep.h"
	#include "qapi/error.h"
	#include "trace.h"
	#include "qemu/iov.h"
	#include "qemu/main-loop.h"
	#include "qemu/thread.h"
	#include "qemu/error-report.h"
	#include "hw/virtio/virtio-blk.h"
	#include "virtio-blk.h"
	#include "block/aio.h"
	#include "hw/virtio/virtio-bus.h"
	#include "qom/object_interfaces.h"

	struct VirtIOBlockDataPlane {
	bool starting;
	bool stopping;

	VirtIOBlkConf *conf;
	VirtIODevice *vdev;

	/* Note that these EventNotifiers are assigned by value. This is
	* fine as long as you do not call event_notifier_cleanup on them
	* (because you don't own the file descriptor or handle; you just
	* use it).
	*/
	IOThread *iothread;
	AioContext *ctx;
	};

	/* Raise an interrupt to signal guest, if necessary */
	void virtio_blk_data_plane_notify(VirtIOBlockDataPlane s, VirtQueue vq)
	{
	virtio_notify_irqfd(s->vdev, vq);
	}

	/* Context: QEMU global mutex held */
	bool virtio_blk_data_plane_create(VirtIODevice vdev, VirtIOBlkConf conf,
	VirtIOBlockDataPlane **dataplane,
	Error **errp)
	{
	VirtIOBlockDataPlane *s;
	BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vdev)));
	VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);

	*dataplane = NULL;

	if (conf->iothread) {
	if (!k->set_guest_notifiers \|\| !k->ioeventfd_assign) {
	error_setg(errp,
	"device is incompatible with iothread "
	"(transport does not support notifiers)");
	return false;
	}
	if (!virtio_device_ioeventfd_enabled(vdev)) {
	error_setg(errp, "ioeventfd is required for iothread");
	return false;
	}

	/* If dataplane is (re-)enabled while the guest is running there could
	* be block jobs that can conflict.
	*/
	if (blk_op_is_blocked(conf->conf.blk, BLOCK_OP_TYPE_DATAPLANE, errp)) {
	error_prepend(errp, "cannot start virtio-blk dataplane: ");
	return false;
	}
	}
	/* Don't try if transport does not support notifiers. */
	if (!virtio_device_ioeventfd_enabled(vdev)) {
	return false;
	}

	s = g_new0(VirtIOBlockDataPlane, 1);
	s->vdev = vdev;
	s->conf = conf;

	if (conf->iothread) {
	s->iothread = conf->iothread;
	object_ref(OBJECT(s->iothread));
	s->ctx = iothread_get_aio_context(s->iothread);
	} else {
	s->ctx = qemu_get_aio_context();
	}

	*dataplane = s;

	return true;
	}

	/* Context: QEMU global mutex held */
	void virtio_blk_data_plane_destroy(VirtIOBlockDataPlane *s)
	{
	VirtIOBlock *vblk;

	if (!s) {
	return;
	}

	vblk = VIRTIO_BLK(s->vdev);
	assert(!vblk->dataplane_started);
	if (s->iothread) {
	object_unref(OBJECT(s->iothread));
	}
	g_free(s);
	}

	/* Context: QEMU global mutex held */
	int virtio_blk_data_plane_start(VirtIODevice *vdev)
	{
	VirtIOBlock *vblk = VIRTIO_BLK(vdev);
	VirtIOBlockDataPlane *s = vblk->dataplane;
	BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(vblk)));
	VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
	unsigned i;
	unsigned nvqs = s->conf->num_queues;
	Error *local_err = NULL;
	int r;

	if (vblk->dataplane_started \|\| s->starting) {
	return 0;
	}

	s->starting = true;

	/* Set up guest notifier (irq) */
	r = k->set_guest_notifiers(qbus->parent, nvqs, true);
	if (r != 0) {
	error_report("virtio-blk failed to set guest notifier (%d), "
	"ensure -accel kvm is set.", r);
	goto fail_guest_notifiers;
	}

	/*
	* Batch all the host notifiers in a single transaction to avoid
	* quadratic time complexity in address_space_update_ioeventfds().
	*/
	memory_region_transaction_begin();

	/* Set up virtqueue notify */
	for (i = 0; i < nvqs; i++) {
	r = virtio_bus_set_host_notifier(VIRTIO_BUS(qbus), i, true);
	if (r != 0) {
	int j = i;

	fprintf(stderr, "virtio-blk failed to set host notifier (%d)\n", r);
	while (i--) {
	virtio_bus_set_host_notifier(VIRTIO_BUS(qbus), i, false);
	}

	/*
	* The transaction expects the ioeventfds to be open when it
	* commits. Do it now, before the cleanup loop.
	*/
	memory_region_transaction_commit();

	while (j--) {
	virtio_bus_cleanup_host_notifier(VIRTIO_BUS(qbus), j);
	}
	goto fail_host_notifiers;
	}
	}

	memory_region_transaction_commit();

	trace_virtio_blk_data_plane_start(s);

	r = blk_set_aio_context(s->conf->conf.blk, s->ctx, &local_err);
	if (r < 0) {
	error_report_err(local_err);
	goto fail_aio_context;
	}

	/* Kick right away to begin processing requests already in vring */
	for (i = 0; i < nvqs; i++) {
	VirtQueue *vq = virtio_get_queue(s->vdev, i);

	event_notifier_set(virtio_queue_get_host_notifier(vq));
	}

	/*
	* These fields must be visible to the IOThread when it processes the
	* virtqueue, otherwise it will think dataplane has not started yet.
	*
	* Make sure ->dataplane_started is false when blk_set_aio_context() is
	* called above so that draining does not cause the host notifier to be
	* detached/attached prematurely.
	*/
	s->starting = false;
	vblk->dataplane_started = true;
	smp_wmb(); /* paired with aio_notify_accept() on the read side */

	/* Get this show started by hooking up our callbacks */
	if (!blk_in_drain(s->conf->conf.blk)) {
	for (i = 0; i < nvqs; i++) {
	VirtQueue *vq = virtio_get_queue(s->vdev, i);

	virtio_queue_aio_attach_host_notifier(vq, s->ctx);
	}
	}
	return 0;

	fail_aio_context:
	memory_region_transaction_begin();

	for (i = 0; i < nvqs; i++) {
	virtio_bus_set_host_notifier(VIRTIO_BUS(qbus), i, false);
	}

	memory_region_transaction_commit();

	for (i = 0; i < nvqs; i++) {
	virtio_bus_cleanup_host_notifier(VIRTIO_BUS(qbus), i);
	}
	fail_host_notifiers:
	k->set_guest_notifiers(qbus->parent, nvqs, false);
	fail_guest_notifiers:
	vblk->dataplane_disabled = true;
	s->starting = false;
	return -ENOSYS;
	}

	/* Stop notifications for new requests from guest.
	*
	* Context: BH in IOThread
	*/
	static void virtio_blk_data_plane_stop_bh(void *opaque)
	{
	VirtIOBlockDataPlane *s = opaque;
	unsigned i;

	for (i = 0; i < s->conf->num_queues; i++) {
	VirtQueue *vq = virtio_get_queue(s->vdev, i);
	EventNotifier *host_notifier = virtio_queue_get_host_notifier(vq);

	virtio_queue_aio_detach_host_notifier(vq, s->ctx);

	/*
	* Test and clear notifier after disabling event, in case poll callback
	* didn't have time to run.
	*/
	virtio_queue_host_notifier_read(host_notifier);
	}
	}

	/* Context: QEMU global mutex held */
	void virtio_blk_data_plane_stop(VirtIODevice *vdev)
	{
	VirtIOBlock *vblk = VIRTIO_BLK(vdev);
	VirtIOBlockDataPlane *s = vblk->dataplane;
	BusState *qbus = qdev_get_parent_bus(DEVICE(vblk));
	VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus);
	unsigned i;
	unsigned nvqs = s->conf->num_queues;

	if (!vblk->dataplane_started \|\| s->stopping) {
	return;
	}

	/* Better luck next time. */
	if (vblk->dataplane_disabled) {
	vblk->dataplane_disabled = false;
	vblk->dataplane_started = false;
	return;
	}
	s->stopping = true;
	trace_virtio_blk_data_plane_stop(s);

	if (!blk_in_drain(s->conf->conf.blk)) {
	aio_wait_bh_oneshot(s->ctx, virtio_blk_data_plane_stop_bh, s);
	}

	/*
	* Batch all the host notifiers in a single transaction to avoid
	* quadratic time complexity in address_space_update_ioeventfds().
	*/
	memory_region_transaction_begin();

	for (i = 0; i < nvqs; i++) {
	virtio_bus_set_host_notifier(VIRTIO_BUS(qbus), i, false);
	}

	/*
	* The transaction expects the ioeventfds to be open when it
	* commits. Do it now, before the cleanup loop.
	*/
	memory_region_transaction_commit();

	for (i = 0; i < nvqs; i++) {
	virtio_bus_cleanup_host_notifier(VIRTIO_BUS(qbus), i);
	}

	/*
	* Set ->dataplane_started to false before draining so that host notifiers
	* are not detached/attached anymore.
	*/
	vblk->dataplane_started = false;

	/* Wait for virtio_blk_dma_restart_bh() and in flight I/O to complete */
	blk_drain(s->conf->conf.blk);

	/*
	* Try to switch bs back to the QEMU main loop. If other users keep the
	* BlockBackend in the iothread, that's ok
	*/
	blk_set_aio_context(s->conf->conf.blk, qemu_get_aio_context(), NULL);

	/* Clean up guest notifier (irq) */
	k->set_guest_notifiers(qbus->parent, nvqs, false);

	s->stopping = false;
	}