| /* |
| * QEMU SiI3112A PCI to Serial ATA Controller Emulation |
| * |
| * Copyright (C) 2017 BALATON Zoltan <balaton@eik.bme.hu> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| * |
| */ |
| |
| /* For documentation on this and similar cards see: |
| * http://wiki.osdev.org/User:Quok/Silicon_Image_Datasheets |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/ide/pci.h" |
| #include "qemu/module.h" |
| #include "trace.h" |
| #include "qom/object.h" |
| #include "ide-internal.h" |
| |
| #define TYPE_SII3112_PCI "sii3112" |
| OBJECT_DECLARE_SIMPLE_TYPE(SiI3112PCIState, SII3112_PCI) |
| |
| typedef struct SiI3112Regs { |
| uint32_t confstat; |
| uint32_t scontrol; |
| uint16_t sien; |
| uint8_t swdata; |
| } SiI3112Regs; |
| |
| struct SiI3112PCIState { |
| PCIIDEState i; |
| MemoryRegion mmio; |
| SiI3112Regs regs[2]; |
| }; |
| |
| /* The sii3112_reg_read and sii3112_reg_write functions implement the |
| * Internal Register Space - BAR5 (section 6.7 of the data sheet). |
| */ |
| |
| static uint64_t sii3112_reg_read(void *opaque, hwaddr addr, |
| unsigned int size) |
| { |
| SiI3112PCIState *d = opaque; |
| uint64_t val; |
| |
| switch (addr) { |
| case 0x00: |
| val = d->i.bmdma[0].cmd; |
| break; |
| case 0x01: |
| val = d->regs[0].swdata; |
| break; |
| case 0x02: |
| val = d->i.bmdma[0].status; |
| break; |
| case 0x03: |
| val = 0; |
| break; |
| case 0x04 ... 0x07: |
| val = bmdma_addr_ioport_ops.read(&d->i.bmdma[0], addr - 4, size); |
| break; |
| case 0x08: |
| val = d->i.bmdma[1].cmd; |
| break; |
| case 0x09: |
| val = d->regs[1].swdata; |
| break; |
| case 0x0a: |
| val = d->i.bmdma[1].status; |
| break; |
| case 0x0b: |
| val = 0; |
| break; |
| case 0x0c ... 0x0f: |
| val = bmdma_addr_ioport_ops.read(&d->i.bmdma[1], addr - 12, size); |
| break; |
| case 0x10: |
| val = d->i.bmdma[0].cmd; |
| val |= (d->regs[0].confstat & (1UL << 11) ? (1 << 4) : 0); /*SATAINT0*/ |
| val |= (d->regs[1].confstat & (1UL << 11) ? (1 << 6) : 0); /*SATAINT1*/ |
| val |= (d->i.bmdma[1].status & BM_STATUS_INT ? (1 << 14) : 0); |
| val |= (uint32_t)d->i.bmdma[0].status << 16; |
| val |= (uint32_t)d->i.bmdma[1].status << 24; |
| break; |
| case 0x18: |
| val = d->i.bmdma[1].cmd; |
| val |= (d->regs[1].confstat & (1UL << 11) ? (1 << 4) : 0); |
| val |= (uint32_t)d->i.bmdma[1].status << 16; |
| break; |
| case 0x80 ... 0x87: |
| val = pci_ide_data_le_ops.read(&d->i.bus[0], addr - 0x80, size); |
| break; |
| case 0x8a: |
| val = pci_ide_cmd_le_ops.read(&d->i.bus[0], 2, size); |
| break; |
| case 0xa0: |
| val = d->regs[0].confstat; |
| break; |
| case 0xc0 ... 0xc7: |
| val = pci_ide_data_le_ops.read(&d->i.bus[1], addr - 0xc0, size); |
| break; |
| case 0xca: |
| val = pci_ide_cmd_le_ops.read(&d->i.bus[1], 2, size); |
| break; |
| case 0xe0: |
| val = d->regs[1].confstat; |
| break; |
| case 0x100: |
| val = d->regs[0].scontrol; |
| break; |
| case 0x104: |
| val = (d->i.bus[0].ifs[0].blk) ? 0x113 : 0; |
| break; |
| case 0x148: |
| val = (uint32_t)d->regs[0].sien << 16; |
| break; |
| case 0x180: |
| val = d->regs[1].scontrol; |
| break; |
| case 0x184: |
| val = (d->i.bus[1].ifs[0].blk) ? 0x113 : 0; |
| break; |
| case 0x1c8: |
| val = (uint32_t)d->regs[1].sien << 16; |
| break; |
| default: |
| val = 0; |
| break; |
| } |
| trace_sii3112_read(size, addr, val); |
| return val; |
| } |
| |
| static void sii3112_reg_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned int size) |
| { |
| SiI3112PCIState *d = opaque; |
| |
| trace_sii3112_write(size, addr, val); |
| switch (addr) { |
| case 0x00: |
| case 0x10: |
| bmdma_cmd_writeb(&d->i.bmdma[0], val); |
| break; |
| case 0x01: |
| case 0x11: |
| d->regs[0].swdata = val & 0x3f; |
| break; |
| case 0x02: |
| case 0x12: |
| bmdma_status_writeb(&d->i.bmdma[0], val); |
| break; |
| case 0x04 ... 0x07: |
| bmdma_addr_ioport_ops.write(&d->i.bmdma[0], addr - 4, val, size); |
| break; |
| case 0x08: |
| case 0x18: |
| bmdma_cmd_writeb(&d->i.bmdma[1], val); |
| break; |
| case 0x09: |
| case 0x19: |
| d->regs[1].swdata = val & 0x3f; |
| break; |
| case 0x0a: |
| case 0x1a: |
| bmdma_status_writeb(&d->i.bmdma[1], val); |
| break; |
| case 0x0c ... 0x0f: |
| bmdma_addr_ioport_ops.write(&d->i.bmdma[1], addr - 12, val, size); |
| break; |
| case 0x80 ... 0x87: |
| pci_ide_data_le_ops.write(&d->i.bus[0], addr - 0x80, val, size); |
| break; |
| case 0x8a: |
| pci_ide_cmd_le_ops.write(&d->i.bus[0], 2, val, size); |
| break; |
| case 0xc0 ... 0xc7: |
| pci_ide_data_le_ops.write(&d->i.bus[1], addr - 0xc0, val, size); |
| break; |
| case 0xca: |
| pci_ide_cmd_le_ops.write(&d->i.bus[1], 2, val, size); |
| break; |
| case 0x100: |
| d->regs[0].scontrol = val & 0xfff; |
| if (val & 1) { |
| ide_bus_reset(&d->i.bus[0]); |
| } |
| break; |
| case 0x148: |
| d->regs[0].sien = (val >> 16) & 0x3eed; |
| break; |
| case 0x180: |
| d->regs[1].scontrol = val & 0xfff; |
| if (val & 1) { |
| ide_bus_reset(&d->i.bus[1]); |
| } |
| break; |
| case 0x1c8: |
| d->regs[1].sien = (val >> 16) & 0x3eed; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static const MemoryRegionOps sii3112_reg_ops = { |
| .read = sii3112_reg_read, |
| .write = sii3112_reg_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| /* the PCI irq level is the logical OR of the two channels */ |
| static void sii3112_update_irq(SiI3112PCIState *s) |
| { |
| int i, set = 0; |
| |
| for (i = 0; i < 2; i++) { |
| set |= s->regs[i].confstat & (1UL << 11); |
| } |
| pci_set_irq(PCI_DEVICE(s), (set ? 1 : 0)); |
| } |
| |
| static void sii3112_set_irq(void *opaque, int channel, int level) |
| { |
| SiI3112PCIState *s = opaque; |
| |
| trace_sii3112_set_irq(channel, level); |
| if (level) { |
| s->regs[channel].confstat |= (1UL << 11); |
| } else { |
| s->regs[channel].confstat &= ~(1UL << 11); |
| } |
| |
| sii3112_update_irq(s); |
| } |
| |
| static void sii3112_reset(DeviceState *dev) |
| { |
| SiI3112PCIState *s = SII3112_PCI(dev); |
| int i; |
| |
| for (i = 0; i < 2; i++) { |
| s->regs[i].confstat = 0x6515 << 16; |
| ide_bus_reset(&s->i.bus[i]); |
| } |
| } |
| |
| static void sii3112_pci_realize(PCIDevice *dev, Error **errp) |
| { |
| SiI3112PCIState *d = SII3112_PCI(dev); |
| PCIIDEState *s = PCI_IDE(dev); |
| DeviceState *ds = DEVICE(dev); |
| MemoryRegion *mr; |
| int i; |
| |
| pci_config_set_interrupt_pin(dev->config, 1); |
| pci_set_byte(dev->config + PCI_CACHE_LINE_SIZE, 8); |
| |
| /* BAR5 is in PCI memory space */ |
| memory_region_init_io(&d->mmio, OBJECT(d), &sii3112_reg_ops, d, |
| "sii3112.bar5", 0x200); |
| pci_register_bar(dev, 5, PCI_BASE_ADDRESS_SPACE_MEMORY, &d->mmio); |
| |
| /* BAR0-BAR4 are PCI I/O space aliases into BAR5 */ |
| mr = g_new(MemoryRegion, 1); |
| memory_region_init_alias(mr, OBJECT(d), "sii3112.bar0", &d->mmio, 0x80, 8); |
| pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, mr); |
| mr = g_new(MemoryRegion, 1); |
| memory_region_init_alias(mr, OBJECT(d), "sii3112.bar1", &d->mmio, 0x88, 4); |
| pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_IO, mr); |
| mr = g_new(MemoryRegion, 1); |
| memory_region_init_alias(mr, OBJECT(d), "sii3112.bar2", &d->mmio, 0xc0, 8); |
| pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_IO, mr); |
| mr = g_new(MemoryRegion, 1); |
| memory_region_init_alias(mr, OBJECT(d), "sii3112.bar3", &d->mmio, 0xc8, 4); |
| pci_register_bar(dev, 3, PCI_BASE_ADDRESS_SPACE_IO, mr); |
| mr = g_new(MemoryRegion, 1); |
| memory_region_init_alias(mr, OBJECT(d), "sii3112.bar4", &d->mmio, 0, 16); |
| pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, mr); |
| |
| qdev_init_gpio_in(ds, sii3112_set_irq, 2); |
| for (i = 0; i < 2; i++) { |
| ide_bus_init(&s->bus[i], sizeof(s->bus[i]), ds, i, 1); |
| ide_bus_init_output_irq(&s->bus[i], qdev_get_gpio_in(ds, i)); |
| |
| bmdma_init(&s->bus[i], &s->bmdma[i], s); |
| ide_bus_register_restart_cb(&s->bus[i]); |
| } |
| } |
| |
| static void sii3112_pci_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *pd = PCI_DEVICE_CLASS(klass); |
| |
| pd->vendor_id = 0x1095; |
| pd->device_id = 0x3112; |
| pd->class_id = PCI_CLASS_STORAGE_RAID; |
| pd->revision = 1; |
| pd->realize = sii3112_pci_realize; |
| dc->reset = sii3112_reset; |
| dc->desc = "SiI3112A SATA controller"; |
| set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); |
| } |
| |
| static const TypeInfo sii3112_pci_info = { |
| .name = TYPE_SII3112_PCI, |
| .parent = TYPE_PCI_IDE, |
| .instance_size = sizeof(SiI3112PCIState), |
| .class_init = sii3112_pci_class_init, |
| }; |
| |
| static void sii3112_register_types(void) |
| { |
| type_register_static(&sii3112_pci_info); |
| } |
| |
| type_init(sii3112_register_types) |