| /* |
| * QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator |
| * |
| * Hypercall based emulated RTAS |
| * |
| * Copyright (c) 2010-2011 David Gibson, IBM Corporation. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| * |
| */ |
| #include "qemu/osdep.h" |
| #include "cpu.h" |
| #include "qemu/log.h" |
| #include "qemu/error-report.h" |
| #include "sysemu/sysemu.h" |
| #include "sysemu/char.h" |
| #include "hw/qdev.h" |
| #include "sysemu/device_tree.h" |
| #include "sysemu/cpus.h" |
| #include "sysemu/kvm.h" |
| |
| #include "hw/ppc/spapr.h" |
| #include "hw/ppc/spapr_vio.h" |
| #include "hw/ppc/spapr_rtas.h" |
| #include "hw/ppc/ppc.h" |
| #include "qapi-event.h" |
| #include "hw/boards.h" |
| |
| #include <libfdt.h> |
| #include "hw/ppc/spapr_drc.h" |
| #include "qemu/cutils.h" |
| #include "trace.h" |
| #include "hw/ppc/fdt.h" |
| |
| static sPAPRConfigureConnectorState *spapr_ccs_find(sPAPRMachineState *spapr, |
| uint32_t drc_index) |
| { |
| sPAPRConfigureConnectorState *ccs = NULL; |
| |
| QTAILQ_FOREACH(ccs, &spapr->ccs_list, next) { |
| if (ccs->drc_index == drc_index) { |
| break; |
| } |
| } |
| |
| return ccs; |
| } |
| |
| static void spapr_ccs_add(sPAPRMachineState *spapr, |
| sPAPRConfigureConnectorState *ccs) |
| { |
| g_assert(!spapr_ccs_find(spapr, ccs->drc_index)); |
| QTAILQ_INSERT_HEAD(&spapr->ccs_list, ccs, next); |
| } |
| |
| static void spapr_ccs_remove(sPAPRMachineState *spapr, |
| sPAPRConfigureConnectorState *ccs) |
| { |
| QTAILQ_REMOVE(&spapr->ccs_list, ccs, next); |
| g_free(ccs); |
| } |
| |
| void spapr_ccs_reset_hook(void *opaque) |
| { |
| sPAPRMachineState *spapr = opaque; |
| sPAPRConfigureConnectorState *ccs, *ccs_tmp; |
| |
| QTAILQ_FOREACH_SAFE(ccs, &spapr->ccs_list, next, ccs_tmp) { |
| spapr_ccs_remove(spapr, ccs); |
| } |
| } |
| |
| static void rtas_display_character(PowerPCCPU *cpu, sPAPRMachineState *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| uint8_t c = rtas_ld(args, 0); |
| VIOsPAPRDevice *sdev = vty_lookup(spapr, 0); |
| |
| if (!sdev) { |
| rtas_st(rets, 0, RTAS_OUT_HW_ERROR); |
| } else { |
| vty_putchars(sdev, &c, sizeof(c)); |
| rtas_st(rets, 0, RTAS_OUT_SUCCESS); |
| } |
| } |
| |
| static void rtas_power_off(PowerPCCPU *cpu, sPAPRMachineState *spapr, |
| uint32_t token, uint32_t nargs, target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| if (nargs != 2 || nret != 1) { |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| return; |
| } |
| qemu_system_shutdown_request(); |
| cpu_stop_current(); |
| rtas_st(rets, 0, RTAS_OUT_SUCCESS); |
| } |
| |
| static void rtas_system_reboot(PowerPCCPU *cpu, sPAPRMachineState *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| if (nargs != 0 || nret != 1) { |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| return; |
| } |
| qemu_system_reset_request(); |
| rtas_st(rets, 0, RTAS_OUT_SUCCESS); |
| } |
| |
| static void rtas_query_cpu_stopped_state(PowerPCCPU *cpu_, |
| sPAPRMachineState *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| target_ulong id; |
| PowerPCCPU *cpu; |
| |
| if (nargs != 1 || nret != 2) { |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| return; |
| } |
| |
| id = rtas_ld(args, 0); |
| cpu = ppc_get_vcpu_by_dt_id(id); |
| if (cpu != NULL) { |
| if (CPU(cpu)->halted) { |
| rtas_st(rets, 1, 0); |
| } else { |
| rtas_st(rets, 1, 2); |
| } |
| |
| rtas_st(rets, 0, RTAS_OUT_SUCCESS); |
| return; |
| } |
| |
| /* Didn't find a matching cpu */ |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| } |
| |
| /* |
| * Set the timebase offset of the CPU to that of first CPU. |
| * This helps hotplugged CPU to have the correct timebase offset. |
| */ |
| static void spapr_cpu_update_tb_offset(PowerPCCPU *cpu) |
| { |
| PowerPCCPU *fcpu = POWERPC_CPU(first_cpu); |
| |
| cpu->env.tb_env->tb_offset = fcpu->env.tb_env->tb_offset; |
| } |
| |
| static void spapr_cpu_set_endianness(PowerPCCPU *cpu) |
| { |
| PowerPCCPU *fcpu = POWERPC_CPU(first_cpu); |
| PowerPCCPUClass *pcc = POWERPC_CPU_GET_CLASS(fcpu); |
| |
| if (!pcc->interrupts_big_endian(fcpu)) { |
| cpu->env.spr[SPR_LPCR] |= LPCR_ILE; |
| } |
| } |
| |
| static void rtas_start_cpu(PowerPCCPU *cpu_, sPAPRMachineState *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| target_ulong id, start, r3; |
| PowerPCCPU *cpu; |
| |
| if (nargs != 3 || nret != 1) { |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| return; |
| } |
| |
| id = rtas_ld(args, 0); |
| start = rtas_ld(args, 1); |
| r3 = rtas_ld(args, 2); |
| |
| cpu = ppc_get_vcpu_by_dt_id(id); |
| if (cpu != NULL) { |
| CPUState *cs = CPU(cpu); |
| CPUPPCState *env = &cpu->env; |
| |
| if (!cs->halted) { |
| rtas_st(rets, 0, RTAS_OUT_HW_ERROR); |
| return; |
| } |
| |
| /* This will make sure qemu state is up to date with kvm, and |
| * mark it dirty so our changes get flushed back before the |
| * new cpu enters */ |
| kvm_cpu_synchronize_state(cs); |
| |
| env->msr = (1ULL << MSR_SF) | (1ULL << MSR_ME); |
| env->nip = start; |
| env->gpr[3] = r3; |
| cs->halted = 0; |
| spapr_cpu_set_endianness(cpu); |
| spapr_cpu_update_tb_offset(cpu); |
| |
| qemu_cpu_kick(cs); |
| |
| rtas_st(rets, 0, RTAS_OUT_SUCCESS); |
| return; |
| } |
| |
| /* Didn't find a matching cpu */ |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| } |
| |
| static void rtas_stop_self(PowerPCCPU *cpu, sPAPRMachineState *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| CPUState *cs = CPU(cpu); |
| CPUPPCState *env = &cpu->env; |
| |
| cs->halted = 1; |
| qemu_cpu_kick(cs); |
| /* |
| * While stopping a CPU, the guest calls H_CPPR which |
| * effectively disables interrupts on XICS level. |
| * However decrementer interrupts in TCG can still |
| * wake the CPU up so here we disable interrupts in MSR |
| * as well. |
| * As rtas_start_cpu() resets the whole MSR anyway, there is |
| * no need to bother with specific bits, we just clear it. |
| */ |
| env->msr = 0; |
| } |
| |
| static inline int sysparm_st(target_ulong addr, target_ulong len, |
| const void *val, uint16_t vallen) |
| { |
| hwaddr phys = ppc64_phys_to_real(addr); |
| |
| if (len < 2) { |
| return RTAS_OUT_SYSPARM_PARAM_ERROR; |
| } |
| stw_be_phys(&address_space_memory, phys, vallen); |
| cpu_physical_memory_write(phys + 2, val, MIN(len - 2, vallen)); |
| return RTAS_OUT_SUCCESS; |
| } |
| |
| static void rtas_ibm_get_system_parameter(PowerPCCPU *cpu, |
| sPAPRMachineState *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| target_ulong parameter = rtas_ld(args, 0); |
| target_ulong buffer = rtas_ld(args, 1); |
| target_ulong length = rtas_ld(args, 2); |
| target_ulong ret; |
| |
| switch (parameter) { |
| case RTAS_SYSPARM_SPLPAR_CHARACTERISTICS: { |
| char *param_val = g_strdup_printf("MaxEntCap=%d," |
| "DesMem=%llu," |
| "DesProcs=%d," |
| "MaxPlatProcs=%d", |
| max_cpus, |
| current_machine->ram_size / M_BYTE, |
| smp_cpus, |
| max_cpus); |
| ret = sysparm_st(buffer, length, param_val, strlen(param_val) + 1); |
| g_free(param_val); |
| break; |
| } |
| case RTAS_SYSPARM_DIAGNOSTICS_RUN_MODE: { |
| uint8_t param_val = DIAGNOSTICS_RUN_MODE_DISABLED; |
| |
| ret = sysparm_st(buffer, length, ¶m_val, sizeof(param_val)); |
| break; |
| } |
| case RTAS_SYSPARM_UUID: |
| ret = sysparm_st(buffer, length, (unsigned char *)&qemu_uuid, |
| (qemu_uuid_set ? 16 : 0)); |
| break; |
| default: |
| ret = RTAS_OUT_NOT_SUPPORTED; |
| } |
| |
| rtas_st(rets, 0, ret); |
| } |
| |
| static void rtas_ibm_set_system_parameter(PowerPCCPU *cpu, |
| sPAPRMachineState *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| target_ulong parameter = rtas_ld(args, 0); |
| target_ulong ret = RTAS_OUT_NOT_SUPPORTED; |
| |
| switch (parameter) { |
| case RTAS_SYSPARM_SPLPAR_CHARACTERISTICS: |
| case RTAS_SYSPARM_DIAGNOSTICS_RUN_MODE: |
| case RTAS_SYSPARM_UUID: |
| ret = RTAS_OUT_NOT_AUTHORIZED; |
| break; |
| } |
| |
| rtas_st(rets, 0, ret); |
| } |
| |
| static void rtas_ibm_os_term(PowerPCCPU *cpu, |
| sPAPRMachineState *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| target_ulong ret = 0; |
| |
| qapi_event_send_guest_panicked(GUEST_PANIC_ACTION_PAUSE, &error_abort); |
| |
| rtas_st(rets, 0, ret); |
| } |
| |
| static void rtas_set_power_level(PowerPCCPU *cpu, sPAPRMachineState *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, uint32_t nret, |
| target_ulong rets) |
| { |
| int32_t power_domain; |
| |
| if (nargs != 2 || nret != 2) { |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| return; |
| } |
| |
| /* we currently only use a single, "live insert" powerdomain for |
| * hotplugged/dlpar'd resources, so the power is always live/full (100) |
| */ |
| power_domain = rtas_ld(args, 0); |
| if (power_domain != -1) { |
| rtas_st(rets, 0, RTAS_OUT_NOT_SUPPORTED); |
| return; |
| } |
| |
| rtas_st(rets, 0, RTAS_OUT_SUCCESS); |
| rtas_st(rets, 1, 100); |
| } |
| |
| static void rtas_get_power_level(PowerPCCPU *cpu, sPAPRMachineState *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, uint32_t nret, |
| target_ulong rets) |
| { |
| int32_t power_domain; |
| |
| if (nargs != 1 || nret != 2) { |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| return; |
| } |
| |
| /* we currently only use a single, "live insert" powerdomain for |
| * hotplugged/dlpar'd resources, so the power is always live/full (100) |
| */ |
| power_domain = rtas_ld(args, 0); |
| if (power_domain != -1) { |
| rtas_st(rets, 0, RTAS_OUT_NOT_SUPPORTED); |
| return; |
| } |
| |
| rtas_st(rets, 0, RTAS_OUT_SUCCESS); |
| rtas_st(rets, 1, 100); |
| } |
| |
| static bool sensor_type_is_dr(uint32_t sensor_type) |
| { |
| switch (sensor_type) { |
| case RTAS_SENSOR_TYPE_ISOLATION_STATE: |
| case RTAS_SENSOR_TYPE_DR: |
| case RTAS_SENSOR_TYPE_ALLOCATION_STATE: |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static void rtas_set_indicator(PowerPCCPU *cpu, sPAPRMachineState *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, uint32_t nret, |
| target_ulong rets) |
| { |
| uint32_t sensor_type; |
| uint32_t sensor_index; |
| uint32_t sensor_state; |
| uint32_t ret = RTAS_OUT_SUCCESS; |
| sPAPRDRConnector *drc; |
| sPAPRDRConnectorClass *drck; |
| |
| if (nargs != 3 || nret != 1) { |
| ret = RTAS_OUT_PARAM_ERROR; |
| goto out; |
| } |
| |
| sensor_type = rtas_ld(args, 0); |
| sensor_index = rtas_ld(args, 1); |
| sensor_state = rtas_ld(args, 2); |
| |
| if (!sensor_type_is_dr(sensor_type)) { |
| goto out_unimplemented; |
| } |
| |
| /* if this is a DR sensor we can assume sensor_index == drc_index */ |
| drc = spapr_dr_connector_by_index(sensor_index); |
| if (!drc) { |
| trace_spapr_rtas_set_indicator_invalid(sensor_index); |
| ret = RTAS_OUT_PARAM_ERROR; |
| goto out; |
| } |
| drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc); |
| |
| switch (sensor_type) { |
| case RTAS_SENSOR_TYPE_ISOLATION_STATE: |
| /* if the guest is configuring a device attached to this |
| * DRC, we should reset the configuration state at this |
| * point since it may no longer be reliable (guest released |
| * device and needs to start over, or unplug occurred so |
| * the FDT is no longer valid) |
| */ |
| if (sensor_state == SPAPR_DR_ISOLATION_STATE_ISOLATED) { |
| sPAPRConfigureConnectorState *ccs = spapr_ccs_find(spapr, |
| sensor_index); |
| if (ccs) { |
| spapr_ccs_remove(spapr, ccs); |
| } |
| } |
| ret = drck->set_isolation_state(drc, sensor_state); |
| break; |
| case RTAS_SENSOR_TYPE_DR: |
| ret = drck->set_indicator_state(drc, sensor_state); |
| break; |
| case RTAS_SENSOR_TYPE_ALLOCATION_STATE: |
| ret = drck->set_allocation_state(drc, sensor_state); |
| break; |
| default: |
| goto out_unimplemented; |
| } |
| |
| out: |
| rtas_st(rets, 0, ret); |
| return; |
| |
| out_unimplemented: |
| /* currently only DR-related sensors are implemented */ |
| trace_spapr_rtas_set_indicator_not_supported(sensor_index, sensor_type); |
| rtas_st(rets, 0, RTAS_OUT_NOT_SUPPORTED); |
| } |
| |
| static void rtas_get_sensor_state(PowerPCCPU *cpu, sPAPRMachineState *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, uint32_t nret, |
| target_ulong rets) |
| { |
| uint32_t sensor_type; |
| uint32_t sensor_index; |
| uint32_t sensor_state = 0; |
| sPAPRDRConnector *drc; |
| sPAPRDRConnectorClass *drck; |
| uint32_t ret = RTAS_OUT_SUCCESS; |
| |
| if (nargs != 2 || nret != 2) { |
| ret = RTAS_OUT_PARAM_ERROR; |
| goto out; |
| } |
| |
| sensor_type = rtas_ld(args, 0); |
| sensor_index = rtas_ld(args, 1); |
| |
| if (sensor_type != RTAS_SENSOR_TYPE_ENTITY_SENSE) { |
| /* currently only DR-related sensors are implemented */ |
| trace_spapr_rtas_get_sensor_state_not_supported(sensor_index, |
| sensor_type); |
| ret = RTAS_OUT_NOT_SUPPORTED; |
| goto out; |
| } |
| |
| drc = spapr_dr_connector_by_index(sensor_index); |
| if (!drc) { |
| trace_spapr_rtas_get_sensor_state_invalid(sensor_index); |
| ret = RTAS_OUT_PARAM_ERROR; |
| goto out; |
| } |
| drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc); |
| ret = drck->entity_sense(drc, &sensor_state); |
| |
| out: |
| rtas_st(rets, 0, ret); |
| rtas_st(rets, 1, sensor_state); |
| } |
| |
| /* configure-connector work area offsets, int32_t units for field |
| * indexes, bytes for field offset/len values. |
| * |
| * as documented by PAPR+ v2.7, 13.5.3.5 |
| */ |
| #define CC_IDX_NODE_NAME_OFFSET 2 |
| #define CC_IDX_PROP_NAME_OFFSET 2 |
| #define CC_IDX_PROP_LEN 3 |
| #define CC_IDX_PROP_DATA_OFFSET 4 |
| #define CC_VAL_DATA_OFFSET ((CC_IDX_PROP_DATA_OFFSET + 1) * 4) |
| #define CC_WA_LEN 4096 |
| |
| static void configure_connector_st(target_ulong addr, target_ulong offset, |
| const void *buf, size_t len) |
| { |
| cpu_physical_memory_write(ppc64_phys_to_real(addr + offset), |
| buf, MIN(len, CC_WA_LEN - offset)); |
| } |
| |
| static void rtas_ibm_configure_connector(PowerPCCPU *cpu, |
| sPAPRMachineState *spapr, |
| uint32_t token, uint32_t nargs, |
| target_ulong args, uint32_t nret, |
| target_ulong rets) |
| { |
| uint64_t wa_addr; |
| uint64_t wa_offset; |
| uint32_t drc_index; |
| sPAPRDRConnector *drc; |
| sPAPRDRConnectorClass *drck; |
| sPAPRConfigureConnectorState *ccs; |
| sPAPRDRCCResponse resp = SPAPR_DR_CC_RESPONSE_CONTINUE; |
| int rc; |
| const void *fdt; |
| |
| if (nargs != 2 || nret != 1) { |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| return; |
| } |
| |
| wa_addr = ((uint64_t)rtas_ld(args, 1) << 32) | rtas_ld(args, 0); |
| |
| drc_index = rtas_ld(wa_addr, 0); |
| drc = spapr_dr_connector_by_index(drc_index); |
| if (!drc) { |
| trace_spapr_rtas_ibm_configure_connector_invalid(drc_index); |
| rc = RTAS_OUT_PARAM_ERROR; |
| goto out; |
| } |
| |
| drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc); |
| fdt = drck->get_fdt(drc, NULL); |
| if (!fdt) { |
| trace_spapr_rtas_ibm_configure_connector_missing_fdt(drc_index); |
| rc = SPAPR_DR_CC_RESPONSE_NOT_CONFIGURABLE; |
| goto out; |
| } |
| |
| ccs = spapr_ccs_find(spapr, drc_index); |
| if (!ccs) { |
| ccs = g_new0(sPAPRConfigureConnectorState, 1); |
| (void)drck->get_fdt(drc, &ccs->fdt_offset); |
| ccs->drc_index = drc_index; |
| spapr_ccs_add(spapr, ccs); |
| } |
| |
| do { |
| uint32_t tag; |
| const char *name; |
| const struct fdt_property *prop; |
| int fdt_offset_next, prop_len; |
| |
| tag = fdt_next_tag(fdt, ccs->fdt_offset, &fdt_offset_next); |
| |
| switch (tag) { |
| case FDT_BEGIN_NODE: |
| ccs->fdt_depth++; |
| name = fdt_get_name(fdt, ccs->fdt_offset, NULL); |
| |
| /* provide the name of the next OF node */ |
| wa_offset = CC_VAL_DATA_OFFSET; |
| rtas_st(wa_addr, CC_IDX_NODE_NAME_OFFSET, wa_offset); |
| configure_connector_st(wa_addr, wa_offset, name, strlen(name) + 1); |
| resp = SPAPR_DR_CC_RESPONSE_NEXT_CHILD; |
| break; |
| case FDT_END_NODE: |
| ccs->fdt_depth--; |
| if (ccs->fdt_depth == 0) { |
| /* done sending the device tree, don't need to track |
| * the state anymore |
| */ |
| drck->set_configured(drc); |
| spapr_ccs_remove(spapr, ccs); |
| ccs = NULL; |
| resp = SPAPR_DR_CC_RESPONSE_SUCCESS; |
| } else { |
| resp = SPAPR_DR_CC_RESPONSE_PREV_PARENT; |
| } |
| break; |
| case FDT_PROP: |
| prop = fdt_get_property_by_offset(fdt, ccs->fdt_offset, |
| &prop_len); |
| name = fdt_string(fdt, fdt32_to_cpu(prop->nameoff)); |
| |
| /* provide the name of the next OF property */ |
| wa_offset = CC_VAL_DATA_OFFSET; |
| rtas_st(wa_addr, CC_IDX_PROP_NAME_OFFSET, wa_offset); |
| configure_connector_st(wa_addr, wa_offset, name, strlen(name) + 1); |
| |
| /* provide the length and value of the OF property. data gets |
| * placed immediately after NULL terminator of the OF property's |
| * name string |
| */ |
| wa_offset += strlen(name) + 1, |
| rtas_st(wa_addr, CC_IDX_PROP_LEN, prop_len); |
| rtas_st(wa_addr, CC_IDX_PROP_DATA_OFFSET, wa_offset); |
| configure_connector_st(wa_addr, wa_offset, prop->data, prop_len); |
| resp = SPAPR_DR_CC_RESPONSE_NEXT_PROPERTY; |
| break; |
| case FDT_END: |
| resp = SPAPR_DR_CC_RESPONSE_ERROR; |
| default: |
| /* keep seeking for an actionable tag */ |
| break; |
| } |
| if (ccs) { |
| ccs->fdt_offset = fdt_offset_next; |
| } |
| } while (resp == SPAPR_DR_CC_RESPONSE_CONTINUE); |
| |
| rc = resp; |
| out: |
| rtas_st(rets, 0, rc); |
| } |
| |
| static struct rtas_call { |
| const char *name; |
| spapr_rtas_fn fn; |
| } rtas_table[RTAS_TOKEN_MAX - RTAS_TOKEN_BASE]; |
| |
| target_ulong spapr_rtas_call(PowerPCCPU *cpu, sPAPRMachineState *spapr, |
| uint32_t token, uint32_t nargs, target_ulong args, |
| uint32_t nret, target_ulong rets) |
| { |
| if ((token >= RTAS_TOKEN_BASE) && (token < RTAS_TOKEN_MAX)) { |
| struct rtas_call *call = rtas_table + (token - RTAS_TOKEN_BASE); |
| |
| if (call->fn) { |
| call->fn(cpu, spapr, token, nargs, args, nret, rets); |
| return H_SUCCESS; |
| } |
| } |
| |
| /* HACK: Some Linux early debug code uses RTAS display-character, |
| * but assumes the token value is 0xa (which it is on some real |
| * machines) without looking it up in the device tree. This |
| * special case makes this work */ |
| if (token == 0xa) { |
| rtas_display_character(cpu, spapr, 0xa, nargs, args, nret, rets); |
| return H_SUCCESS; |
| } |
| |
| hcall_dprintf("Unknown RTAS token 0x%x\n", token); |
| rtas_st(rets, 0, RTAS_OUT_PARAM_ERROR); |
| return H_PARAMETER; |
| } |
| |
| uint64_t qtest_rtas_call(char *cmd, uint32_t nargs, uint64_t args, |
| uint32_t nret, uint64_t rets) |
| { |
| int token; |
| |
| for (token = 0; token < RTAS_TOKEN_MAX - RTAS_TOKEN_BASE; token++) { |
| if (strcmp(cmd, rtas_table[token].name) == 0) { |
| sPAPRMachineState *spapr = SPAPR_MACHINE(qdev_get_machine()); |
| PowerPCCPU *cpu = POWERPC_CPU(first_cpu); |
| |
| rtas_table[token].fn(cpu, spapr, token + RTAS_TOKEN_BASE, |
| nargs, args, nret, rets); |
| return H_SUCCESS; |
| } |
| } |
| return H_PARAMETER; |
| } |
| |
| void spapr_rtas_register(int token, const char *name, spapr_rtas_fn fn) |
| { |
| assert((token >= RTAS_TOKEN_BASE) && (token < RTAS_TOKEN_MAX)); |
| |
| token -= RTAS_TOKEN_BASE; |
| |
| assert(!rtas_table[token].name); |
| |
| rtas_table[token].name = name; |
| rtas_table[token].fn = fn; |
| } |
| |
| void spapr_dt_rtas_tokens(void *fdt, int rtas) |
| { |
| int i; |
| |
| for (i = 0; i < RTAS_TOKEN_MAX - RTAS_TOKEN_BASE; i++) { |
| struct rtas_call *call = &rtas_table[i]; |
| |
| if (!call->name) { |
| continue; |
| } |
| |
| _FDT(fdt_setprop_cell(fdt, rtas, call->name, i + RTAS_TOKEN_BASE)); |
| } |
| } |
| |
| void spapr_load_rtas(sPAPRMachineState *spapr, void *fdt, hwaddr addr) |
| { |
| int rtas_node; |
| int ret; |
| |
| /* Copy RTAS blob into guest RAM */ |
| cpu_physical_memory_write(addr, spapr->rtas_blob, spapr->rtas_size); |
| |
| ret = fdt_add_mem_rsv(fdt, addr, spapr->rtas_size); |
| if (ret < 0) { |
| error_report("Couldn't add RTAS reserve entry: %s", |
| fdt_strerror(ret)); |
| exit(1); |
| } |
| |
| /* Update the device tree with the blob's location */ |
| rtas_node = fdt_path_offset(fdt, "/rtas"); |
| assert(rtas_node >= 0); |
| |
| ret = fdt_setprop_cell(fdt, rtas_node, "linux,rtas-base", addr); |
| if (ret < 0) { |
| error_report("Couldn't add linux,rtas-base property: %s", |
| fdt_strerror(ret)); |
| exit(1); |
| } |
| |
| ret = fdt_setprop_cell(fdt, rtas_node, "linux,rtas-entry", addr); |
| if (ret < 0) { |
| error_report("Couldn't add linux,rtas-entry property: %s", |
| fdt_strerror(ret)); |
| exit(1); |
| } |
| |
| ret = fdt_setprop_cell(fdt, rtas_node, "rtas-size", spapr->rtas_size); |
| if (ret < 0) { |
| error_report("Couldn't add rtas-size property: %s", |
| fdt_strerror(ret)); |
| exit(1); |
| } |
| } |
| |
| static void core_rtas_register_types(void) |
| { |
| spapr_rtas_register(RTAS_DISPLAY_CHARACTER, "display-character", |
| rtas_display_character); |
| spapr_rtas_register(RTAS_POWER_OFF, "power-off", rtas_power_off); |
| spapr_rtas_register(RTAS_SYSTEM_REBOOT, "system-reboot", |
| rtas_system_reboot); |
| spapr_rtas_register(RTAS_QUERY_CPU_STOPPED_STATE, "query-cpu-stopped-state", |
| rtas_query_cpu_stopped_state); |
| spapr_rtas_register(RTAS_START_CPU, "start-cpu", rtas_start_cpu); |
| spapr_rtas_register(RTAS_STOP_SELF, "stop-self", rtas_stop_self); |
| spapr_rtas_register(RTAS_IBM_GET_SYSTEM_PARAMETER, |
| "ibm,get-system-parameter", |
| rtas_ibm_get_system_parameter); |
| spapr_rtas_register(RTAS_IBM_SET_SYSTEM_PARAMETER, |
| "ibm,set-system-parameter", |
| rtas_ibm_set_system_parameter); |
| spapr_rtas_register(RTAS_IBM_OS_TERM, "ibm,os-term", |
| rtas_ibm_os_term); |
| spapr_rtas_register(RTAS_SET_POWER_LEVEL, "set-power-level", |
| rtas_set_power_level); |
| spapr_rtas_register(RTAS_GET_POWER_LEVEL, "get-power-level", |
| rtas_get_power_level); |
| spapr_rtas_register(RTAS_SET_INDICATOR, "set-indicator", |
| rtas_set_indicator); |
| spapr_rtas_register(RTAS_GET_SENSOR_STATE, "get-sensor-state", |
| rtas_get_sensor_state); |
| spapr_rtas_register(RTAS_IBM_CONFIGURE_CONNECTOR, "ibm,configure-connector", |
| rtas_ibm_configure_connector); |
| } |
| |
| type_init(core_rtas_register_types) |