| /* |
| * QEMU IDE disk and CD/DVD-ROM Emulator |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * Copyright (c) 2006 Openedhand Ltd. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/isa/isa.h" |
| #include "migration/vmstate.h" |
| #include "qemu/error-report.h" |
| #include "qemu/main-loop.h" |
| #include "qemu/timer.h" |
| #include "sysemu/sysemu.h" |
| #include "sysemu/blockdev.h" |
| #include "sysemu/dma.h" |
| #include "hw/block/block.h" |
| #include "sysemu/block-backend.h" |
| #include "qapi/error.h" |
| #include "qemu/cutils.h" |
| #include "sysemu/replay.h" |
| #include "sysemu/runstate.h" |
| #include "hw/ide/internal.h" |
| #include "trace.h" |
| |
| /* These values were based on a Seagate ST3500418AS but have been modified |
| to make more sense in QEMU */ |
| static const int smart_attributes[][12] = { |
| /* id, flags, hflags, val, wrst, raw (6 bytes), threshold */ |
| /* raw read error rate*/ |
| { 0x01, 0x03, 0x00, 0x64, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06}, |
| /* spin up */ |
| { 0x03, 0x03, 0x00, 0x64, 0x64, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, |
| /* start stop count */ |
| { 0x04, 0x02, 0x00, 0x64, 0x64, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x14}, |
| /* remapped sectors */ |
| { 0x05, 0x03, 0x00, 0x64, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x24}, |
| /* power on hours */ |
| { 0x09, 0x03, 0x00, 0x64, 0x64, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, |
| /* power cycle count */ |
| { 0x0c, 0x03, 0x00, 0x64, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, |
| /* airflow-temperature-celsius */ |
| { 190, 0x03, 0x00, 0x45, 0x45, 0x1f, 0x00, 0x1f, 0x1f, 0x00, 0x00, 0x32}, |
| }; |
| |
| const char *IDE_DMA_CMD_lookup[IDE_DMA__COUNT] = { |
| [IDE_DMA_READ] = "DMA READ", |
| [IDE_DMA_WRITE] = "DMA WRITE", |
| [IDE_DMA_TRIM] = "DMA TRIM", |
| [IDE_DMA_ATAPI] = "DMA ATAPI" |
| }; |
| |
| static const char *IDE_DMA_CMD_str(enum ide_dma_cmd enval) |
| { |
| if ((unsigned)enval < IDE_DMA__COUNT) { |
| return IDE_DMA_CMD_lookup[enval]; |
| } |
| return "DMA UNKNOWN CMD"; |
| } |
| |
| static void ide_dummy_transfer_stop(IDEState *s); |
| |
| static void padstr(char *str, const char *src, int len) |
| { |
| int i, v; |
| for(i = 0; i < len; i++) { |
| if (*src) |
| v = *src++; |
| else |
| v = ' '; |
| str[i^1] = v; |
| } |
| } |
| |
| static void put_le16(uint16_t *p, unsigned int v) |
| { |
| *p = cpu_to_le16(v); |
| } |
| |
| static void ide_identify_size(IDEState *s) |
| { |
| uint16_t *p = (uint16_t *)s->identify_data; |
| put_le16(p + 60, s->nb_sectors); |
| put_le16(p + 61, s->nb_sectors >> 16); |
| put_le16(p + 100, s->nb_sectors); |
| put_le16(p + 101, s->nb_sectors >> 16); |
| put_le16(p + 102, s->nb_sectors >> 32); |
| put_le16(p + 103, s->nb_sectors >> 48); |
| } |
| |
| static void ide_identify(IDEState *s) |
| { |
| uint16_t *p; |
| unsigned int oldsize; |
| IDEDevice *dev = s->unit ? s->bus->slave : s->bus->master; |
| |
| p = (uint16_t *)s->identify_data; |
| if (s->identify_set) { |
| goto fill_buffer; |
| } |
| memset(p, 0, sizeof(s->identify_data)); |
| |
| put_le16(p + 0, 0x0040); |
| put_le16(p + 1, s->cylinders); |
| put_le16(p + 3, s->heads); |
| put_le16(p + 4, 512 * s->sectors); /* XXX: retired, remove ? */ |
| put_le16(p + 5, 512); /* XXX: retired, remove ? */ |
| put_le16(p + 6, s->sectors); |
| padstr((char *)(p + 10), s->drive_serial_str, 20); /* serial number */ |
| put_le16(p + 20, 3); /* XXX: retired, remove ? */ |
| put_le16(p + 21, 512); /* cache size in sectors */ |
| put_le16(p + 22, 4); /* ecc bytes */ |
| padstr((char *)(p + 23), s->version, 8); /* firmware version */ |
| padstr((char *)(p + 27), s->drive_model_str, 40); /* model */ |
| #if MAX_MULT_SECTORS > 1 |
| put_le16(p + 47, 0x8000 | MAX_MULT_SECTORS); |
| #endif |
| put_le16(p + 48, 1); /* dword I/O */ |
| put_le16(p + 49, (1 << 11) | (1 << 9) | (1 << 8)); /* DMA and LBA supported */ |
| put_le16(p + 51, 0x200); /* PIO transfer cycle */ |
| put_le16(p + 52, 0x200); /* DMA transfer cycle */ |
| put_le16(p + 53, 1 | (1 << 1) | (1 << 2)); /* words 54-58,64-70,88 are valid */ |
| put_le16(p + 54, s->cylinders); |
| put_le16(p + 55, s->heads); |
| put_le16(p + 56, s->sectors); |
| oldsize = s->cylinders * s->heads * s->sectors; |
| put_le16(p + 57, oldsize); |
| put_le16(p + 58, oldsize >> 16); |
| if (s->mult_sectors) |
| put_le16(p + 59, 0x100 | s->mult_sectors); |
| /* *(p + 60) := nb_sectors -- see ide_identify_size */ |
| /* *(p + 61) := nb_sectors >> 16 -- see ide_identify_size */ |
| put_le16(p + 62, 0x07); /* single word dma0-2 supported */ |
| put_le16(p + 63, 0x07); /* mdma0-2 supported */ |
| put_le16(p + 64, 0x03); /* pio3-4 supported */ |
| put_le16(p + 65, 120); |
| put_le16(p + 66, 120); |
| put_le16(p + 67, 120); |
| put_le16(p + 68, 120); |
| if (dev && dev->conf.discard_granularity) { |
| put_le16(p + 69, (1 << 14)); /* determinate TRIM behavior */ |
| } |
| |
| if (s->ncq_queues) { |
| put_le16(p + 75, s->ncq_queues - 1); |
| /* NCQ supported */ |
| put_le16(p + 76, (1 << 8)); |
| } |
| |
| put_le16(p + 80, 0xf0); /* ata3 -> ata6 supported */ |
| put_le16(p + 81, 0x16); /* conforms to ata5 */ |
| /* 14=NOP supported, 5=WCACHE supported, 0=SMART supported */ |
| put_le16(p + 82, (1 << 14) | (1 << 5) | 1); |
| /* 13=flush_cache_ext,12=flush_cache,10=lba48 */ |
| put_le16(p + 83, (1 << 14) | (1 << 13) | (1 <<12) | (1 << 10)); |
| /* 14=set to 1, 8=has WWN, 1=SMART self test, 0=SMART error logging */ |
| if (s->wwn) { |
| put_le16(p + 84, (1 << 14) | (1 << 8) | 0); |
| } else { |
| put_le16(p + 84, (1 << 14) | 0); |
| } |
| /* 14 = NOP supported, 5=WCACHE enabled, 0=SMART feature set enabled */ |
| if (blk_enable_write_cache(s->blk)) { |
| put_le16(p + 85, (1 << 14) | (1 << 5) | 1); |
| } else { |
| put_le16(p + 85, (1 << 14) | 1); |
| } |
| /* 13=flush_cache_ext,12=flush_cache,10=lba48 */ |
| put_le16(p + 86, (1 << 13) | (1 <<12) | (1 << 10)); |
| /* 14=set to 1, 8=has WWN, 1=SMART self test, 0=SMART error logging */ |
| if (s->wwn) { |
| put_le16(p + 87, (1 << 14) | (1 << 8) | 0); |
| } else { |
| put_le16(p + 87, (1 << 14) | 0); |
| } |
| put_le16(p + 88, 0x3f | (1 << 13)); /* udma5 set and supported */ |
| put_le16(p + 93, 1 | (1 << 14) | 0x2000); |
| /* *(p + 100) := nb_sectors -- see ide_identify_size */ |
| /* *(p + 101) := nb_sectors >> 16 -- see ide_identify_size */ |
| /* *(p + 102) := nb_sectors >> 32 -- see ide_identify_size */ |
| /* *(p + 103) := nb_sectors >> 48 -- see ide_identify_size */ |
| |
| if (dev && dev->conf.physical_block_size) |
| put_le16(p + 106, 0x6000 | get_physical_block_exp(&dev->conf)); |
| if (s->wwn) { |
| /* LE 16-bit words 111-108 contain 64-bit World Wide Name */ |
| put_le16(p + 108, s->wwn >> 48); |
| put_le16(p + 109, s->wwn >> 32); |
| put_le16(p + 110, s->wwn >> 16); |
| put_le16(p + 111, s->wwn); |
| } |
| if (dev && dev->conf.discard_granularity) { |
| put_le16(p + 169, 1); /* TRIM support */ |
| } |
| if (dev) { |
| put_le16(p + 217, dev->rotation_rate); /* Nominal media rotation rate */ |
| } |
| |
| ide_identify_size(s); |
| s->identify_set = 1; |
| |
| fill_buffer: |
| memcpy(s->io_buffer, p, sizeof(s->identify_data)); |
| } |
| |
| static void ide_atapi_identify(IDEState *s) |
| { |
| uint16_t *p; |
| |
| p = (uint16_t *)s->identify_data; |
| if (s->identify_set) { |
| goto fill_buffer; |
| } |
| memset(p, 0, sizeof(s->identify_data)); |
| |
| /* Removable CDROM, 50us response, 12 byte packets */ |
| put_le16(p + 0, (2 << 14) | (5 << 8) | (1 << 7) | (2 << 5) | (0 << 0)); |
| padstr((char *)(p + 10), s->drive_serial_str, 20); /* serial number */ |
| put_le16(p + 20, 3); /* buffer type */ |
| put_le16(p + 21, 512); /* cache size in sectors */ |
| put_le16(p + 22, 4); /* ecc bytes */ |
| padstr((char *)(p + 23), s->version, 8); /* firmware version */ |
| padstr((char *)(p + 27), s->drive_model_str, 40); /* model */ |
| put_le16(p + 48, 1); /* dword I/O (XXX: should not be set on CDROM) */ |
| #ifdef USE_DMA_CDROM |
| put_le16(p + 49, 1 << 9 | 1 << 8); /* DMA and LBA supported */ |
| put_le16(p + 53, 7); /* words 64-70, 54-58, 88 valid */ |
| put_le16(p + 62, 7); /* single word dma0-2 supported */ |
| put_le16(p + 63, 7); /* mdma0-2 supported */ |
| #else |
| put_le16(p + 49, 1 << 9); /* LBA supported, no DMA */ |
| put_le16(p + 53, 3); /* words 64-70, 54-58 valid */ |
| put_le16(p + 63, 0x103); /* DMA modes XXX: may be incorrect */ |
| #endif |
| put_le16(p + 64, 3); /* pio3-4 supported */ |
| put_le16(p + 65, 0xb4); /* minimum DMA multiword tx cycle time */ |
| put_le16(p + 66, 0xb4); /* recommended DMA multiword tx cycle time */ |
| put_le16(p + 67, 0x12c); /* minimum PIO cycle time without flow control */ |
| put_le16(p + 68, 0xb4); /* minimum PIO cycle time with IORDY flow control */ |
| |
| put_le16(p + 71, 30); /* in ns */ |
| put_le16(p + 72, 30); /* in ns */ |
| |
| if (s->ncq_queues) { |
| put_le16(p + 75, s->ncq_queues - 1); |
| /* NCQ supported */ |
| put_le16(p + 76, (1 << 8)); |
| } |
| |
| put_le16(p + 80, 0x1e); /* support up to ATA/ATAPI-4 */ |
| if (s->wwn) { |
| put_le16(p + 84, (1 << 8)); /* supports WWN for words 108-111 */ |
| put_le16(p + 87, (1 << 8)); /* WWN enabled */ |
| } |
| |
| #ifdef USE_DMA_CDROM |
| put_le16(p + 88, 0x3f | (1 << 13)); /* udma5 set and supported */ |
| #endif |
| |
| if (s->wwn) { |
| /* LE 16-bit words 111-108 contain 64-bit World Wide Name */ |
| put_le16(p + 108, s->wwn >> 48); |
| put_le16(p + 109, s->wwn >> 32); |
| put_le16(p + 110, s->wwn >> 16); |
| put_le16(p + 111, s->wwn); |
| } |
| |
| s->identify_set = 1; |
| |
| fill_buffer: |
| memcpy(s->io_buffer, p, sizeof(s->identify_data)); |
| } |
| |
| static void ide_cfata_identify_size(IDEState *s) |
| { |
| uint16_t *p = (uint16_t *)s->identify_data; |
| put_le16(p + 7, s->nb_sectors >> 16); /* Sectors per card */ |
| put_le16(p + 8, s->nb_sectors); /* Sectors per card */ |
| put_le16(p + 60, s->nb_sectors); /* Total LBA sectors */ |
| put_le16(p + 61, s->nb_sectors >> 16); /* Total LBA sectors */ |
| } |
| |
| static void ide_cfata_identify(IDEState *s) |
| { |
| uint16_t *p; |
| uint32_t cur_sec; |
| |
| p = (uint16_t *)s->identify_data; |
| if (s->identify_set) { |
| goto fill_buffer; |
| } |
| memset(p, 0, sizeof(s->identify_data)); |
| |
| cur_sec = s->cylinders * s->heads * s->sectors; |
| |
| put_le16(p + 0, 0x848a); /* CF Storage Card signature */ |
| put_le16(p + 1, s->cylinders); /* Default cylinders */ |
| put_le16(p + 3, s->heads); /* Default heads */ |
| put_le16(p + 6, s->sectors); /* Default sectors per track */ |
| /* *(p + 7) := nb_sectors >> 16 -- see ide_cfata_identify_size */ |
| /* *(p + 8) := nb_sectors -- see ide_cfata_identify_size */ |
| padstr((char *)(p + 10), s->drive_serial_str, 20); /* serial number */ |
| put_le16(p + 22, 0x0004); /* ECC bytes */ |
| padstr((char *) (p + 23), s->version, 8); /* Firmware Revision */ |
| padstr((char *) (p + 27), s->drive_model_str, 40);/* Model number */ |
| #if MAX_MULT_SECTORS > 1 |
| put_le16(p + 47, 0x8000 | MAX_MULT_SECTORS); |
| #else |
| put_le16(p + 47, 0x0000); |
| #endif |
| put_le16(p + 49, 0x0f00); /* Capabilities */ |
| put_le16(p + 51, 0x0002); /* PIO cycle timing mode */ |
| put_le16(p + 52, 0x0001); /* DMA cycle timing mode */ |
| put_le16(p + 53, 0x0003); /* Translation params valid */ |
| put_le16(p + 54, s->cylinders); /* Current cylinders */ |
| put_le16(p + 55, s->heads); /* Current heads */ |
| put_le16(p + 56, s->sectors); /* Current sectors */ |
| put_le16(p + 57, cur_sec); /* Current capacity */ |
| put_le16(p + 58, cur_sec >> 16); /* Current capacity */ |
| if (s->mult_sectors) /* Multiple sector setting */ |
| put_le16(p + 59, 0x100 | s->mult_sectors); |
| /* *(p + 60) := nb_sectors -- see ide_cfata_identify_size */ |
| /* *(p + 61) := nb_sectors >> 16 -- see ide_cfata_identify_size */ |
| put_le16(p + 63, 0x0203); /* Multiword DMA capability */ |
| put_le16(p + 64, 0x0001); /* Flow Control PIO support */ |
| put_le16(p + 65, 0x0096); /* Min. Multiword DMA cycle */ |
| put_le16(p + 66, 0x0096); /* Rec. Multiword DMA cycle */ |
| put_le16(p + 68, 0x00b4); /* Min. PIO cycle time */ |
| put_le16(p + 82, 0x400c); /* Command Set supported */ |
| put_le16(p + 83, 0x7068); /* Command Set supported */ |
| put_le16(p + 84, 0x4000); /* Features supported */ |
| put_le16(p + 85, 0x000c); /* Command Set enabled */ |
| put_le16(p + 86, 0x7044); /* Command Set enabled */ |
| put_le16(p + 87, 0x4000); /* Features enabled */ |
| put_le16(p + 91, 0x4060); /* Current APM level */ |
| put_le16(p + 129, 0x0002); /* Current features option */ |
| put_le16(p + 130, 0x0005); /* Reassigned sectors */ |
| put_le16(p + 131, 0x0001); /* Initial power mode */ |
| put_le16(p + 132, 0x0000); /* User signature */ |
| put_le16(p + 160, 0x8100); /* Power requirement */ |
| put_le16(p + 161, 0x8001); /* CF command set */ |
| |
| ide_cfata_identify_size(s); |
| s->identify_set = 1; |
| |
| fill_buffer: |
| memcpy(s->io_buffer, p, sizeof(s->identify_data)); |
| } |
| |
| static void ide_set_signature(IDEState *s) |
| { |
| s->select &= ~(ATA_DEV_HS); /* clear head */ |
| /* put signature */ |
| s->nsector = 1; |
| s->sector = 1; |
| if (s->drive_kind == IDE_CD) { |
| s->lcyl = 0x14; |
| s->hcyl = 0xeb; |
| } else if (s->blk) { |
| s->lcyl = 0; |
| s->hcyl = 0; |
| } else { |
| s->lcyl = 0xff; |
| s->hcyl = 0xff; |
| } |
| } |
| |
| static bool ide_sect_range_ok(IDEState *s, |
| uint64_t sector, uint64_t nb_sectors) |
| { |
| uint64_t total_sectors; |
| |
| blk_get_geometry(s->blk, &total_sectors); |
| if (sector > total_sectors || nb_sectors > total_sectors - sector) { |
| return false; |
| } |
| return true; |
| } |
| |
| typedef struct TrimAIOCB { |
| BlockAIOCB common; |
| IDEState *s; |
| QEMUBH *bh; |
| int ret; |
| QEMUIOVector *qiov; |
| BlockAIOCB *aiocb; |
| int i, j; |
| } TrimAIOCB; |
| |
| static void trim_aio_cancel(BlockAIOCB *acb) |
| { |
| TrimAIOCB *iocb = container_of(acb, TrimAIOCB, common); |
| |
| /* Exit the loop so ide_issue_trim_cb will not continue */ |
| iocb->j = iocb->qiov->niov - 1; |
| iocb->i = (iocb->qiov->iov[iocb->j].iov_len / 8) - 1; |
| |
| iocb->ret = -ECANCELED; |
| |
| if (iocb->aiocb) { |
| blk_aio_cancel_async(iocb->aiocb); |
| iocb->aiocb = NULL; |
| } |
| } |
| |
| static const AIOCBInfo trim_aiocb_info = { |
| .aiocb_size = sizeof(TrimAIOCB), |
| .cancel_async = trim_aio_cancel, |
| }; |
| |
| static void ide_trim_bh_cb(void *opaque) |
| { |
| TrimAIOCB *iocb = opaque; |
| |
| iocb->common.cb(iocb->common.opaque, iocb->ret); |
| |
| qemu_bh_delete(iocb->bh); |
| iocb->bh = NULL; |
| qemu_aio_unref(iocb); |
| } |
| |
| static void ide_issue_trim_cb(void *opaque, int ret) |
| { |
| TrimAIOCB *iocb = opaque; |
| IDEState *s = iocb->s; |
| |
| if (iocb->i >= 0) { |
| if (ret >= 0) { |
| block_acct_done(blk_get_stats(s->blk), &s->acct); |
| } else { |
| block_acct_failed(blk_get_stats(s->blk), &s->acct); |
| } |
| } |
| |
| if (ret >= 0) { |
| while (iocb->j < iocb->qiov->niov) { |
| int j = iocb->j; |
| while (++iocb->i < iocb->qiov->iov[j].iov_len / 8) { |
| int i = iocb->i; |
| uint64_t *buffer = iocb->qiov->iov[j].iov_base; |
| |
| /* 6-byte LBA + 2-byte range per entry */ |
| uint64_t entry = le64_to_cpu(buffer[i]); |
| uint64_t sector = entry & 0x0000ffffffffffffULL; |
| uint16_t count = entry >> 48; |
| |
| if (count == 0) { |
| continue; |
| } |
| |
| if (!ide_sect_range_ok(s, sector, count)) { |
| block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_UNMAP); |
| iocb->ret = -EINVAL; |
| goto done; |
| } |
| |
| block_acct_start(blk_get_stats(s->blk), &s->acct, |
| count << BDRV_SECTOR_BITS, BLOCK_ACCT_UNMAP); |
| |
| /* Got an entry! Submit and exit. */ |
| iocb->aiocb = blk_aio_pdiscard(s->blk, |
| sector << BDRV_SECTOR_BITS, |
| count << BDRV_SECTOR_BITS, |
| ide_issue_trim_cb, opaque); |
| return; |
| } |
| |
| iocb->j++; |
| iocb->i = -1; |
| } |
| } else { |
| iocb->ret = ret; |
| } |
| |
| done: |
| iocb->aiocb = NULL; |
| if (iocb->bh) { |
| replay_bh_schedule_event(iocb->bh); |
| } |
| } |
| |
| BlockAIOCB *ide_issue_trim( |
| int64_t offset, QEMUIOVector *qiov, |
| BlockCompletionFunc *cb, void *cb_opaque, void *opaque) |
| { |
| IDEState *s = opaque; |
| TrimAIOCB *iocb; |
| |
| iocb = blk_aio_get(&trim_aiocb_info, s->blk, cb, cb_opaque); |
| iocb->s = s; |
| iocb->bh = qemu_bh_new(ide_trim_bh_cb, iocb); |
| iocb->ret = 0; |
| iocb->qiov = qiov; |
| iocb->i = -1; |
| iocb->j = 0; |
| ide_issue_trim_cb(iocb, 0); |
| return &iocb->common; |
| } |
| |
| void ide_abort_command(IDEState *s) |
| { |
| ide_transfer_stop(s); |
| s->status = READY_STAT | ERR_STAT; |
| s->error = ABRT_ERR; |
| } |
| |
| static void ide_set_retry(IDEState *s) |
| { |
| s->bus->retry_unit = s->unit; |
| s->bus->retry_sector_num = ide_get_sector(s); |
| s->bus->retry_nsector = s->nsector; |
| } |
| |
| static void ide_clear_retry(IDEState *s) |
| { |
| s->bus->retry_unit = -1; |
| s->bus->retry_sector_num = 0; |
| s->bus->retry_nsector = 0; |
| } |
| |
| /* prepare data transfer and tell what to do after */ |
| bool ide_transfer_start_norecurse(IDEState *s, uint8_t *buf, int size, |
| EndTransferFunc *end_transfer_func) |
| { |
| s->data_ptr = buf; |
| s->data_end = buf + size; |
| ide_set_retry(s); |
| if (!(s->status & ERR_STAT)) { |
| s->status |= DRQ_STAT; |
| } |
| if (!s->bus->dma->ops->pio_transfer) { |
| s->end_transfer_func = end_transfer_func; |
| return false; |
| } |
| s->bus->dma->ops->pio_transfer(s->bus->dma); |
| return true; |
| } |
| |
| void ide_transfer_start(IDEState *s, uint8_t *buf, int size, |
| EndTransferFunc *end_transfer_func) |
| { |
| if (ide_transfer_start_norecurse(s, buf, size, end_transfer_func)) { |
| end_transfer_func(s); |
| } |
| } |
| |
| static void ide_cmd_done(IDEState *s) |
| { |
| if (s->bus->dma->ops->cmd_done) { |
| s->bus->dma->ops->cmd_done(s->bus->dma); |
| } |
| } |
| |
| static void ide_transfer_halt(IDEState *s) |
| { |
| s->end_transfer_func = ide_transfer_stop; |
| s->data_ptr = s->io_buffer; |
| s->data_end = s->io_buffer; |
| s->status &= ~DRQ_STAT; |
| } |
| |
| void ide_transfer_stop(IDEState *s) |
| { |
| ide_transfer_halt(s); |
| ide_cmd_done(s); |
| } |
| |
| int64_t ide_get_sector(IDEState *s) |
| { |
| int64_t sector_num; |
| if (s->select & (ATA_DEV_LBA)) { |
| if (s->lba48) { |
| sector_num = ((int64_t)s->hob_hcyl << 40) | |
| ((int64_t) s->hob_lcyl << 32) | |
| ((int64_t) s->hob_sector << 24) | |
| ((int64_t) s->hcyl << 16) | |
| ((int64_t) s->lcyl << 8) | s->sector; |
| } else { |
| /* LBA28 */ |
| sector_num = ((s->select & (ATA_DEV_LBA_MSB)) << 24) | |
| (s->hcyl << 16) | (s->lcyl << 8) | s->sector; |
| } |
| } else { |
| /* CHS */ |
| sector_num = ((s->hcyl << 8) | s->lcyl) * s->heads * s->sectors + |
| (s->select & (ATA_DEV_HS)) * s->sectors + (s->sector - 1); |
| } |
| |
| return sector_num; |
| } |
| |
| void ide_set_sector(IDEState *s, int64_t sector_num) |
| { |
| unsigned int cyl, r; |
| if (s->select & (ATA_DEV_LBA)) { |
| if (s->lba48) { |
| s->sector = sector_num; |
| s->lcyl = sector_num >> 8; |
| s->hcyl = sector_num >> 16; |
| s->hob_sector = sector_num >> 24; |
| s->hob_lcyl = sector_num >> 32; |
| s->hob_hcyl = sector_num >> 40; |
| } else { |
| /* LBA28 */ |
| s->select = (s->select & ~(ATA_DEV_LBA_MSB)) | |
| ((sector_num >> 24) & (ATA_DEV_LBA_MSB)); |
| s->hcyl = (sector_num >> 16); |
| s->lcyl = (sector_num >> 8); |
| s->sector = (sector_num); |
| } |
| } else { |
| /* CHS */ |
| cyl = sector_num / (s->heads * s->sectors); |
| r = sector_num % (s->heads * s->sectors); |
| s->hcyl = cyl >> 8; |
| s->lcyl = cyl; |
| s->select = (s->select & ~(ATA_DEV_HS)) | |
| ((r / s->sectors) & (ATA_DEV_HS)); |
| s->sector = (r % s->sectors) + 1; |
| } |
| } |
| |
| static void ide_rw_error(IDEState *s) { |
| ide_abort_command(s); |
| ide_set_irq(s->bus); |
| } |
| |
| static void ide_buffered_readv_cb(void *opaque, int ret) |
| { |
| IDEBufferedRequest *req = opaque; |
| if (!req->orphaned) { |
| if (!ret) { |
| assert(req->qiov.size == req->original_qiov->size); |
| qemu_iovec_from_buf(req->original_qiov, 0, |
| req->qiov.local_iov.iov_base, |
| req->original_qiov->size); |
| } |
| req->original_cb(req->original_opaque, ret); |
| } |
| QLIST_REMOVE(req, list); |
| qemu_vfree(qemu_iovec_buf(&req->qiov)); |
| g_free(req); |
| } |
| |
| #define MAX_BUFFERED_REQS 16 |
| |
| BlockAIOCB *ide_buffered_readv(IDEState *s, int64_t sector_num, |
| QEMUIOVector *iov, int nb_sectors, |
| BlockCompletionFunc *cb, void *opaque) |
| { |
| BlockAIOCB *aioreq; |
| IDEBufferedRequest *req; |
| int c = 0; |
| |
| QLIST_FOREACH(req, &s->buffered_requests, list) { |
| c++; |
| } |
| if (c > MAX_BUFFERED_REQS) { |
| return blk_abort_aio_request(s->blk, cb, opaque, -EIO); |
| } |
| |
| req = g_new0(IDEBufferedRequest, 1); |
| req->original_qiov = iov; |
| req->original_cb = cb; |
| req->original_opaque = opaque; |
| qemu_iovec_init_buf(&req->qiov, blk_blockalign(s->blk, iov->size), |
| iov->size); |
| |
| aioreq = blk_aio_preadv(s->blk, sector_num << BDRV_SECTOR_BITS, |
| &req->qiov, 0, ide_buffered_readv_cb, req); |
| |
| QLIST_INSERT_HEAD(&s->buffered_requests, req, list); |
| return aioreq; |
| } |
| |
| /** |
| * Cancel all pending DMA requests. |
| * Any buffered DMA requests are instantly canceled, |
| * but any pending unbuffered DMA requests must be waited on. |
| */ |
| void ide_cancel_dma_sync(IDEState *s) |
| { |
| IDEBufferedRequest *req; |
| |
| /* First invoke the callbacks of all buffered requests |
| * and flag those requests as orphaned. Ideally there |
| * are no unbuffered (Scatter Gather DMA Requests or |
| * write requests) pending and we can avoid to drain. */ |
| QLIST_FOREACH(req, &s->buffered_requests, list) { |
| if (!req->orphaned) { |
| trace_ide_cancel_dma_sync_buffered(req->original_cb, req); |
| req->original_cb(req->original_opaque, -ECANCELED); |
| } |
| req->orphaned = true; |
| } |
| |
| /* |
| * We can't cancel Scatter Gather DMA in the middle of the |
| * operation or a partial (not full) DMA transfer would reach |
| * the storage so we wait for completion instead (we behave |
| * like if the DMA was completed by the time the guest trying |
| * to cancel dma with bmdma_cmd_writeb with BM_CMD_START not |
| * set). |
| * |
| * In the future we'll be able to safely cancel the I/O if the |
| * whole DMA operation will be submitted to disk with a single |
| * aio operation with preadv/pwritev. |
| */ |
| if (s->bus->dma->aiocb) { |
| trace_ide_cancel_dma_sync_remaining(); |
| blk_drain(s->blk); |
| assert(s->bus->dma->aiocb == NULL); |
| } |
| } |
| |
| static void ide_sector_read(IDEState *s); |
| |
| static void ide_sector_read_cb(void *opaque, int ret) |
| { |
| IDEState *s = opaque; |
| int n; |
| |
| s->pio_aiocb = NULL; |
| s->status &= ~BUSY_STAT; |
| |
| if (ret != 0) { |
| if (ide_handle_rw_error(s, -ret, IDE_RETRY_PIO | |
| IDE_RETRY_READ)) { |
| return; |
| } |
| } |
| |
| block_acct_done(blk_get_stats(s->blk), &s->acct); |
| |
| n = s->nsector; |
| if (n > s->req_nb_sectors) { |
| n = s->req_nb_sectors; |
| } |
| |
| ide_set_sector(s, ide_get_sector(s) + n); |
| s->nsector -= n; |
| /* Allow the guest to read the io_buffer */ |
| ide_transfer_start(s, s->io_buffer, n * BDRV_SECTOR_SIZE, ide_sector_read); |
| ide_set_irq(s->bus); |
| } |
| |
| static void ide_sector_read(IDEState *s) |
| { |
| int64_t sector_num; |
| int n; |
| |
| s->status = READY_STAT | SEEK_STAT; |
| s->error = 0; /* not needed by IDE spec, but needed by Windows */ |
| sector_num = ide_get_sector(s); |
| n = s->nsector; |
| |
| if (n == 0) { |
| ide_transfer_stop(s); |
| return; |
| } |
| |
| s->status |= BUSY_STAT; |
| |
| if (n > s->req_nb_sectors) { |
| n = s->req_nb_sectors; |
| } |
| |
| trace_ide_sector_read(sector_num, n); |
| |
| if (!ide_sect_range_ok(s, sector_num, n)) { |
| ide_rw_error(s); |
| block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_READ); |
| return; |
| } |
| |
| qemu_iovec_init_buf(&s->qiov, s->io_buffer, n * BDRV_SECTOR_SIZE); |
| |
| block_acct_start(blk_get_stats(s->blk), &s->acct, |
| n * BDRV_SECTOR_SIZE, BLOCK_ACCT_READ); |
| s->pio_aiocb = ide_buffered_readv(s, sector_num, &s->qiov, n, |
| ide_sector_read_cb, s); |
| } |
| |
| void dma_buf_commit(IDEState *s, uint32_t tx_bytes) |
| { |
| if (s->bus->dma->ops->commit_buf) { |
| s->bus->dma->ops->commit_buf(s->bus->dma, tx_bytes); |
| } |
| s->io_buffer_offset += tx_bytes; |
| qemu_sglist_destroy(&s->sg); |
| } |
| |
| void ide_set_inactive(IDEState *s, bool more) |
| { |
| s->bus->dma->aiocb = NULL; |
| ide_clear_retry(s); |
| if (s->bus->dma->ops->set_inactive) { |
| s->bus->dma->ops->set_inactive(s->bus->dma, more); |
| } |
| ide_cmd_done(s); |
| } |
| |
| void ide_dma_error(IDEState *s) |
| { |
| dma_buf_commit(s, 0); |
| ide_abort_command(s); |
| ide_set_inactive(s, false); |
| ide_set_irq(s->bus); |
| } |
| |
| int ide_handle_rw_error(IDEState *s, int error, int op) |
| { |
| bool is_read = (op & IDE_RETRY_READ) != 0; |
| BlockErrorAction action = blk_get_error_action(s->blk, is_read, error); |
| |
| if (action == BLOCK_ERROR_ACTION_STOP) { |
| assert(s->bus->retry_unit == s->unit); |
| s->bus->error_status = op; |
| } else if (action == BLOCK_ERROR_ACTION_REPORT) { |
| block_acct_failed(blk_get_stats(s->blk), &s->acct); |
| if (IS_IDE_RETRY_DMA(op)) { |
| ide_dma_error(s); |
| } else if (IS_IDE_RETRY_ATAPI(op)) { |
| ide_atapi_io_error(s, -error); |
| } else { |
| ide_rw_error(s); |
| } |
| } |
| blk_error_action(s->blk, action, is_read, error); |
| return action != BLOCK_ERROR_ACTION_IGNORE; |
| } |
| |
| static void ide_dma_cb(void *opaque, int ret) |
| { |
| IDEState *s = opaque; |
| int n; |
| int64_t sector_num; |
| uint64_t offset; |
| bool stay_active = false; |
| int32_t prep_size = 0; |
| |
| if (ret == -EINVAL) { |
| ide_dma_error(s); |
| return; |
| } |
| |
| if (ret < 0) { |
| if (ide_handle_rw_error(s, -ret, ide_dma_cmd_to_retry(s->dma_cmd))) { |
| s->bus->dma->aiocb = NULL; |
| dma_buf_commit(s, 0); |
| return; |
| } |
| } |
| |
| if (s->io_buffer_size > s->nsector * 512) { |
| /* |
| * The PRDs were longer than needed for this request. |
| * The Active bit must remain set after the request completes. |
| */ |
| n = s->nsector; |
| stay_active = true; |
| } else { |
| n = s->io_buffer_size >> 9; |
| } |
| |
| sector_num = ide_get_sector(s); |
| if (n > 0) { |
| assert(n * 512 == s->sg.size); |
| dma_buf_commit(s, s->sg.size); |
| sector_num += n; |
| ide_set_sector(s, sector_num); |
| s->nsector -= n; |
| } |
| |
| /* end of transfer ? */ |
| if (s->nsector == 0) { |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| goto eot; |
| } |
| |
| /* launch next transfer */ |
| n = s->nsector; |
| s->io_buffer_index = 0; |
| s->io_buffer_size = n * 512; |
| prep_size = s->bus->dma->ops->prepare_buf(s->bus->dma, s->io_buffer_size); |
| /* prepare_buf() must succeed and respect the limit */ |
| assert(prep_size >= 0 && prep_size <= n * 512); |
| |
| /* |
| * Now prep_size stores the number of bytes in the sglist, and |
| * s->io_buffer_size stores the number of bytes described by the PRDs. |
| */ |
| |
| if (prep_size < n * 512) { |
| /* |
| * The PRDs are too short for this request. Error condition! |
| * Reset the Active bit and don't raise the interrupt. |
| */ |
| s->status = READY_STAT | SEEK_STAT; |
| dma_buf_commit(s, 0); |
| goto eot; |
| } |
| |
| trace_ide_dma_cb(s, sector_num, n, IDE_DMA_CMD_str(s->dma_cmd)); |
| |
| if ((s->dma_cmd == IDE_DMA_READ || s->dma_cmd == IDE_DMA_WRITE) && |
| !ide_sect_range_ok(s, sector_num, n)) { |
| ide_dma_error(s); |
| block_acct_invalid(blk_get_stats(s->blk), s->acct.type); |
| return; |
| } |
| |
| offset = sector_num << BDRV_SECTOR_BITS; |
| switch (s->dma_cmd) { |
| case IDE_DMA_READ: |
| s->bus->dma->aiocb = dma_blk_read(s->blk, &s->sg, offset, |
| BDRV_SECTOR_SIZE, ide_dma_cb, s); |
| break; |
| case IDE_DMA_WRITE: |
| s->bus->dma->aiocb = dma_blk_write(s->blk, &s->sg, offset, |
| BDRV_SECTOR_SIZE, ide_dma_cb, s); |
| break; |
| case IDE_DMA_TRIM: |
| s->bus->dma->aiocb = dma_blk_io(blk_get_aio_context(s->blk), |
| &s->sg, offset, BDRV_SECTOR_SIZE, |
| ide_issue_trim, s, ide_dma_cb, s, |
| DMA_DIRECTION_TO_DEVICE); |
| break; |
| default: |
| abort(); |
| } |
| return; |
| |
| eot: |
| if (s->dma_cmd == IDE_DMA_READ || s->dma_cmd == IDE_DMA_WRITE) { |
| block_acct_done(blk_get_stats(s->blk), &s->acct); |
| } |
| ide_set_inactive(s, stay_active); |
| } |
| |
| static void ide_sector_start_dma(IDEState *s, enum ide_dma_cmd dma_cmd) |
| { |
| s->status = READY_STAT | SEEK_STAT | DRQ_STAT; |
| s->io_buffer_size = 0; |
| s->dma_cmd = dma_cmd; |
| |
| switch (dma_cmd) { |
| case IDE_DMA_READ: |
| block_acct_start(blk_get_stats(s->blk), &s->acct, |
| s->nsector * BDRV_SECTOR_SIZE, BLOCK_ACCT_READ); |
| break; |
| case IDE_DMA_WRITE: |
| block_acct_start(blk_get_stats(s->blk), &s->acct, |
| s->nsector * BDRV_SECTOR_SIZE, BLOCK_ACCT_WRITE); |
| break; |
| default: |
| break; |
| } |
| |
| ide_start_dma(s, ide_dma_cb); |
| } |
| |
| void ide_start_dma(IDEState *s, BlockCompletionFunc *cb) |
| { |
| s->io_buffer_index = 0; |
| ide_set_retry(s); |
| if (s->bus->dma->ops->start_dma) { |
| s->bus->dma->ops->start_dma(s->bus->dma, s, cb); |
| } |
| } |
| |
| static void ide_sector_write(IDEState *s); |
| |
| static void ide_sector_write_timer_cb(void *opaque) |
| { |
| IDEState *s = opaque; |
| ide_set_irq(s->bus); |
| } |
| |
| static void ide_sector_write_cb(void *opaque, int ret) |
| { |
| IDEState *s = opaque; |
| int n; |
| |
| s->pio_aiocb = NULL; |
| s->status &= ~BUSY_STAT; |
| |
| if (ret != 0) { |
| if (ide_handle_rw_error(s, -ret, IDE_RETRY_PIO)) { |
| return; |
| } |
| } |
| |
| block_acct_done(blk_get_stats(s->blk), &s->acct); |
| |
| n = s->nsector; |
| if (n > s->req_nb_sectors) { |
| n = s->req_nb_sectors; |
| } |
| s->nsector -= n; |
| |
| ide_set_sector(s, ide_get_sector(s) + n); |
| if (s->nsector == 0) { |
| /* no more sectors to write */ |
| ide_transfer_stop(s); |
| } else { |
| int n1 = s->nsector; |
| if (n1 > s->req_nb_sectors) { |
| n1 = s->req_nb_sectors; |
| } |
| ide_transfer_start(s, s->io_buffer, n1 * BDRV_SECTOR_SIZE, |
| ide_sector_write); |
| } |
| |
| if (win2k_install_hack && ((++s->irq_count % 16) == 0)) { |
| /* It seems there is a bug in the Windows 2000 installer HDD |
| IDE driver which fills the disk with empty logs when the |
| IDE write IRQ comes too early. This hack tries to correct |
| that at the expense of slower write performances. Use this |
| option _only_ to install Windows 2000. You must disable it |
| for normal use. */ |
| timer_mod(s->sector_write_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + |
| (NANOSECONDS_PER_SECOND / 1000)); |
| } else { |
| ide_set_irq(s->bus); |
| } |
| } |
| |
| static void ide_sector_write(IDEState *s) |
| { |
| int64_t sector_num; |
| int n; |
| |
| s->status = READY_STAT | SEEK_STAT | BUSY_STAT; |
| sector_num = ide_get_sector(s); |
| |
| n = s->nsector; |
| if (n > s->req_nb_sectors) { |
| n = s->req_nb_sectors; |
| } |
| |
| trace_ide_sector_write(sector_num, n); |
| |
| if (!ide_sect_range_ok(s, sector_num, n)) { |
| ide_rw_error(s); |
| block_acct_invalid(blk_get_stats(s->blk), BLOCK_ACCT_WRITE); |
| return; |
| } |
| |
| qemu_iovec_init_buf(&s->qiov, s->io_buffer, n * BDRV_SECTOR_SIZE); |
| |
| block_acct_start(blk_get_stats(s->blk), &s->acct, |
| n * BDRV_SECTOR_SIZE, BLOCK_ACCT_WRITE); |
| s->pio_aiocb = blk_aio_pwritev(s->blk, sector_num << BDRV_SECTOR_BITS, |
| &s->qiov, 0, ide_sector_write_cb, s); |
| } |
| |
| static void ide_flush_cb(void *opaque, int ret) |
| { |
| IDEState *s = opaque; |
| |
| s->pio_aiocb = NULL; |
| |
| if (ret < 0) { |
| /* XXX: What sector number to set here? */ |
| if (ide_handle_rw_error(s, -ret, IDE_RETRY_FLUSH)) { |
| return; |
| } |
| } |
| |
| if (s->blk) { |
| block_acct_done(blk_get_stats(s->blk), &s->acct); |
| } |
| s->status = READY_STAT | SEEK_STAT; |
| ide_cmd_done(s); |
| ide_set_irq(s->bus); |
| } |
| |
| static void ide_flush_cache(IDEState *s) |
| { |
| if (s->blk == NULL) { |
| ide_flush_cb(s, 0); |
| return; |
| } |
| |
| s->status |= BUSY_STAT; |
| ide_set_retry(s); |
| block_acct_start(blk_get_stats(s->blk), &s->acct, 0, BLOCK_ACCT_FLUSH); |
| s->pio_aiocb = blk_aio_flush(s->blk, ide_flush_cb, s); |
| } |
| |
| static void ide_cfata_metadata_inquiry(IDEState *s) |
| { |
| uint16_t *p; |
| uint32_t spd; |
| |
| p = (uint16_t *) s->io_buffer; |
| memset(p, 0, 0x200); |
| spd = ((s->mdata_size - 1) >> 9) + 1; |
| |
| put_le16(p + 0, 0x0001); /* Data format revision */ |
| put_le16(p + 1, 0x0000); /* Media property: silicon */ |
| put_le16(p + 2, s->media_changed); /* Media status */ |
| put_le16(p + 3, s->mdata_size & 0xffff); /* Capacity in bytes (low) */ |
| put_le16(p + 4, s->mdata_size >> 16); /* Capacity in bytes (high) */ |
| put_le16(p + 5, spd & 0xffff); /* Sectors per device (low) */ |
| put_le16(p + 6, spd >> 16); /* Sectors per device (high) */ |
| } |
| |
| static void ide_cfata_metadata_read(IDEState *s) |
| { |
| uint16_t *p; |
| |
| if (((s->hcyl << 16) | s->lcyl) << 9 > s->mdata_size + 2) { |
| s->status = ERR_STAT; |
| s->error = ABRT_ERR; |
| return; |
| } |
| |
| p = (uint16_t *) s->io_buffer; |
| memset(p, 0, 0x200); |
| |
| put_le16(p + 0, s->media_changed); /* Media status */ |
| memcpy(p + 1, s->mdata_storage + (((s->hcyl << 16) | s->lcyl) << 9), |
| MIN(MIN(s->mdata_size - (((s->hcyl << 16) | s->lcyl) << 9), |
| s->nsector << 9), 0x200 - 2)); |
| } |
| |
| static void ide_cfata_metadata_write(IDEState *s) |
| { |
| if (((s->hcyl << 16) | s->lcyl) << 9 > s->mdata_size + 2) { |
| s->status = ERR_STAT; |
| s->error = ABRT_ERR; |
| return; |
| } |
| |
| s->media_changed = 0; |
| |
| memcpy(s->mdata_storage + (((s->hcyl << 16) | s->lcyl) << 9), |
| s->io_buffer + 2, |
| MIN(MIN(s->mdata_size - (((s->hcyl << 16) | s->lcyl) << 9), |
| s->nsector << 9), 0x200 - 2)); |
| } |
| |
| /* called when the inserted state of the media has changed */ |
| static void ide_cd_change_cb(void *opaque, bool load, Error **errp) |
| { |
| IDEState *s = opaque; |
| uint64_t nb_sectors; |
| |
| s->tray_open = !load; |
| blk_get_geometry(s->blk, &nb_sectors); |
| s->nb_sectors = nb_sectors; |
| |
| /* |
| * First indicate to the guest that a CD has been removed. That's |
| * done on the next command the guest sends us. |
| * |
| * Then we set UNIT_ATTENTION, by which the guest will |
| * detect a new CD in the drive. See ide_atapi_cmd() for details. |
| */ |
| s->cdrom_changed = 1; |
| s->events.new_media = true; |
| s->events.eject_request = false; |
| ide_set_irq(s->bus); |
| } |
| |
| static void ide_cd_eject_request_cb(void *opaque, bool force) |
| { |
| IDEState *s = opaque; |
| |
| s->events.eject_request = true; |
| if (force) { |
| s->tray_locked = false; |
| } |
| ide_set_irq(s->bus); |
| } |
| |
| static void ide_cmd_lba48_transform(IDEState *s, int lba48) |
| { |
| s->lba48 = lba48; |
| |
| /* handle the 'magic' 0 nsector count conversion here. to avoid |
| * fiddling with the rest of the read logic, we just store the |
| * full sector count in ->nsector and ignore ->hob_nsector from now |
| */ |
| if (!s->lba48) { |
| if (!s->nsector) |
| s->nsector = 256; |
| } else { |
| if (!s->nsector && !s->hob_nsector) |
| s->nsector = 65536; |
| else { |
| int lo = s->nsector; |
| int hi = s->hob_nsector; |
| |
| s->nsector = (hi << 8) | lo; |
| } |
| } |
| } |
| |
| static void ide_clear_hob(IDEBus *bus) |
| { |
| /* any write clears HOB high bit of device control register */ |
| bus->cmd &= ~(IDE_CTRL_HOB); |
| } |
| |
| /* IOport [W]rite [R]egisters */ |
| enum ATA_IOPORT_WR { |
| ATA_IOPORT_WR_DATA = 0, |
| ATA_IOPORT_WR_FEATURES = 1, |
| ATA_IOPORT_WR_SECTOR_COUNT = 2, |
| ATA_IOPORT_WR_SECTOR_NUMBER = 3, |
| ATA_IOPORT_WR_CYLINDER_LOW = 4, |
| ATA_IOPORT_WR_CYLINDER_HIGH = 5, |
| ATA_IOPORT_WR_DEVICE_HEAD = 6, |
| ATA_IOPORT_WR_COMMAND = 7, |
| ATA_IOPORT_WR_NUM_REGISTERS, |
| }; |
| |
| const char *ATA_IOPORT_WR_lookup[ATA_IOPORT_WR_NUM_REGISTERS] = { |
| [ATA_IOPORT_WR_DATA] = "Data", |
| [ATA_IOPORT_WR_FEATURES] = "Features", |
| [ATA_IOPORT_WR_SECTOR_COUNT] = "Sector Count", |
| [ATA_IOPORT_WR_SECTOR_NUMBER] = "Sector Number", |
| [ATA_IOPORT_WR_CYLINDER_LOW] = "Cylinder Low", |
| [ATA_IOPORT_WR_CYLINDER_HIGH] = "Cylinder High", |
| [ATA_IOPORT_WR_DEVICE_HEAD] = "Device/Head", |
| [ATA_IOPORT_WR_COMMAND] = "Command" |
| }; |
| |
| void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s = idebus_active_if(bus); |
| int reg_num = addr & 7; |
| |
| trace_ide_ioport_write(addr, ATA_IOPORT_WR_lookup[reg_num], val, bus, s); |
| |
| /* ignore writes to command block while busy with previous command */ |
| if (reg_num != 7 && (s->status & (BUSY_STAT|DRQ_STAT))) { |
| return; |
| } |
| |
| /* NOTE: Device0 and Device1 both receive incoming register writes. |
| * (They're on the same bus! They have to!) */ |
| |
| switch (reg_num) { |
| case 0: |
| break; |
| case ATA_IOPORT_WR_FEATURES: |
| ide_clear_hob(bus); |
| bus->ifs[0].hob_feature = bus->ifs[0].feature; |
| bus->ifs[1].hob_feature = bus->ifs[1].feature; |
| bus->ifs[0].feature = val; |
| bus->ifs[1].feature = val; |
| break; |
| case ATA_IOPORT_WR_SECTOR_COUNT: |
| ide_clear_hob(bus); |
| bus->ifs[0].hob_nsector = bus->ifs[0].nsector; |
| bus->ifs[1].hob_nsector = bus->ifs[1].nsector; |
| bus->ifs[0].nsector = val; |
| bus->ifs[1].nsector = val; |
| break; |
| case ATA_IOPORT_WR_SECTOR_NUMBER: |
| ide_clear_hob(bus); |
| bus->ifs[0].hob_sector = bus->ifs[0].sector; |
| bus->ifs[1].hob_sector = bus->ifs[1].sector; |
| bus->ifs[0].sector = val; |
| bus->ifs[1].sector = val; |
| break; |
| case ATA_IOPORT_WR_CYLINDER_LOW: |
| ide_clear_hob(bus); |
| bus->ifs[0].hob_lcyl = bus->ifs[0].lcyl; |
| bus->ifs[1].hob_lcyl = bus->ifs[1].lcyl; |
| bus->ifs[0].lcyl = val; |
| bus->ifs[1].lcyl = val; |
| break; |
| case ATA_IOPORT_WR_CYLINDER_HIGH: |
| ide_clear_hob(bus); |
| bus->ifs[0].hob_hcyl = bus->ifs[0].hcyl; |
| bus->ifs[1].hob_hcyl = bus->ifs[1].hcyl; |
| bus->ifs[0].hcyl = val; |
| bus->ifs[1].hcyl = val; |
| break; |
| case ATA_IOPORT_WR_DEVICE_HEAD: |
| ide_clear_hob(bus); |
| bus->ifs[0].select = val | (ATA_DEV_ALWAYS_ON); |
| bus->ifs[1].select = val | (ATA_DEV_ALWAYS_ON); |
| /* select drive */ |
| bus->unit = (val & (ATA_DEV_SELECT)) ? 1 : 0; |
| break; |
| default: |
| case ATA_IOPORT_WR_COMMAND: |
| ide_clear_hob(bus); |
| qemu_irq_lower(bus->irq); |
| ide_exec_cmd(bus, val); |
| break; |
| } |
| } |
| |
| static void ide_reset(IDEState *s) |
| { |
| trace_ide_reset(s); |
| |
| if (s->pio_aiocb) { |
| blk_aio_cancel(s->pio_aiocb); |
| s->pio_aiocb = NULL; |
| } |
| |
| if (s->drive_kind == IDE_CFATA) |
| s->mult_sectors = 0; |
| else |
| s->mult_sectors = MAX_MULT_SECTORS; |
| /* ide regs */ |
| s->feature = 0; |
| s->error = 0; |
| s->nsector = 0; |
| s->sector = 0; |
| s->lcyl = 0; |
| s->hcyl = 0; |
| |
| /* lba48 */ |
| s->hob_feature = 0; |
| s->hob_sector = 0; |
| s->hob_nsector = 0; |
| s->hob_lcyl = 0; |
| s->hob_hcyl = 0; |
| |
| s->select = (ATA_DEV_ALWAYS_ON); |
| s->status = READY_STAT | SEEK_STAT; |
| |
| s->lba48 = 0; |
| |
| /* ATAPI specific */ |
| s->sense_key = 0; |
| s->asc = 0; |
| s->cdrom_changed = 0; |
| s->packet_transfer_size = 0; |
| s->elementary_transfer_size = 0; |
| s->io_buffer_index = 0; |
| s->cd_sector_size = 0; |
| s->atapi_dma = 0; |
| s->tray_locked = 0; |
| s->tray_open = 0; |
| /* ATA DMA state */ |
| s->io_buffer_size = 0; |
| s->req_nb_sectors = 0; |
| |
| ide_set_signature(s); |
| /* init the transfer handler so that 0xffff is returned on data |
| accesses */ |
| s->end_transfer_func = ide_dummy_transfer_stop; |
| ide_dummy_transfer_stop(s); |
| s->media_changed = 0; |
| } |
| |
| static bool cmd_nop(IDEState *s, uint8_t cmd) |
| { |
| return true; |
| } |
| |
| static bool cmd_device_reset(IDEState *s, uint8_t cmd) |
| { |
| /* Halt PIO (in the DRQ phase), then DMA */ |
| ide_transfer_halt(s); |
| ide_cancel_dma_sync(s); |
| |
| /* Reset any PIO commands, reset signature, etc */ |
| ide_reset(s); |
| |
| /* RESET: ATA8-ACS3 7.10.4 "Normal Outputs"; |
| * ATA8-ACS3 Table 184 "Device Signatures for Normal Output" */ |
| s->status = 0x00; |
| |
| /* Do not overwrite status register */ |
| return false; |
| } |
| |
| static bool cmd_data_set_management(IDEState *s, uint8_t cmd) |
| { |
| switch (s->feature) { |
| case DSM_TRIM: |
| if (s->blk) { |
| ide_sector_start_dma(s, IDE_DMA_TRIM); |
| return false; |
| } |
| break; |
| } |
| |
| ide_abort_command(s); |
| return true; |
| } |
| |
| static bool cmd_identify(IDEState *s, uint8_t cmd) |
| { |
| if (s->blk && s->drive_kind != IDE_CD) { |
| if (s->drive_kind != IDE_CFATA) { |
| ide_identify(s); |
| } else { |
| ide_cfata_identify(s); |
| } |
| s->status = READY_STAT | SEEK_STAT; |
| ide_transfer_start(s, s->io_buffer, 512, ide_transfer_stop); |
| ide_set_irq(s->bus); |
| return false; |
| } else { |
| if (s->drive_kind == IDE_CD) { |
| ide_set_signature(s); |
| } |
| ide_abort_command(s); |
| } |
| |
| return true; |
| } |
| |
| static bool cmd_verify(IDEState *s, uint8_t cmd) |
| { |
| bool lba48 = (cmd == WIN_VERIFY_EXT); |
| |
| /* do sector number check ? */ |
| ide_cmd_lba48_transform(s, lba48); |
| |
| return true; |
| } |
| |
| static bool cmd_set_multiple_mode(IDEState *s, uint8_t cmd) |
| { |
| if (s->drive_kind == IDE_CFATA && s->nsector == 0) { |
| /* Disable Read and Write Multiple */ |
| s->mult_sectors = 0; |
| } else if ((s->nsector & 0xff) != 0 && |
| ((s->nsector & 0xff) > MAX_MULT_SECTORS || |
| (s->nsector & (s->nsector - 1)) != 0)) { |
| ide_abort_command(s); |
| } else { |
| s->mult_sectors = s->nsector & 0xff; |
| } |
| |
| return true; |
| } |
| |
| static bool cmd_read_multiple(IDEState *s, uint8_t cmd) |
| { |
| bool lba48 = (cmd == WIN_MULTREAD_EXT); |
| |
| if (!s->blk || !s->mult_sectors) { |
| ide_abort_command(s); |
| return true; |
| } |
| |
| ide_cmd_lba48_transform(s, lba48); |
| s->req_nb_sectors = s->mult_sectors; |
| ide_sector_read(s); |
| return false; |
| } |
| |
| static bool cmd_write_multiple(IDEState *s, uint8_t cmd) |
| { |
| bool lba48 = (cmd == WIN_MULTWRITE_EXT); |
| int n; |
| |
| if (!s->blk || !s->mult_sectors) { |
| ide_abort_command(s); |
| return true; |
| } |
| |
| ide_cmd_lba48_transform(s, lba48); |
| |
| s->req_nb_sectors = s->mult_sectors; |
| n = MIN(s->nsector, s->req_nb_sectors); |
| |
| s->status = SEEK_STAT | READY_STAT; |
| ide_transfer_start(s, s->io_buffer, 512 * n, ide_sector_write); |
| |
| s->media_changed = 1; |
| |
| return false; |
| } |
| |
| static bool cmd_read_pio(IDEState *s, uint8_t cmd) |
| { |
| bool lba48 = (cmd == WIN_READ_EXT); |
| |
| if (s->drive_kind == IDE_CD) { |
| ide_set_signature(s); /* odd, but ATA4 8.27.5.2 requires it */ |
| ide_abort_command(s); |
| return true; |
| } |
| |
| if (!s->blk) { |
| ide_abort_command(s); |
| return true; |
| } |
| |
| ide_cmd_lba48_transform(s, lba48); |
| s->req_nb_sectors = 1; |
| ide_sector_read(s); |
| |
| return false; |
| } |
| |
| static bool cmd_write_pio(IDEState *s, uint8_t cmd) |
| { |
| bool lba48 = (cmd == WIN_WRITE_EXT); |
| |
| if (!s->blk) { |
| ide_abort_command(s); |
| return true; |
| } |
| |
| ide_cmd_lba48_transform(s, lba48); |
| |
| s->req_nb_sectors = 1; |
| s->status = SEEK_STAT | READY_STAT; |
| ide_transfer_start(s, s->io_buffer, 512, ide_sector_write); |
| |
| s->media_changed = 1; |
| |
| return false; |
| } |
| |
| static bool cmd_read_dma(IDEState *s, uint8_t cmd) |
| { |
| bool lba48 = (cmd == WIN_READDMA_EXT); |
| |
| if (!s->blk) { |
| ide_abort_command(s); |
| return true; |
| } |
| |
| ide_cmd_lba48_transform(s, lba48); |
| ide_sector_start_dma(s, IDE_DMA_READ); |
| |
| return false; |
| } |
| |
| static bool cmd_write_dma(IDEState *s, uint8_t cmd) |
| { |
| bool lba48 = (cmd == WIN_WRITEDMA_EXT); |
| |
| if (!s->blk) { |
| ide_abort_command(s); |
| return true; |
| } |
| |
| ide_cmd_lba48_transform(s, lba48); |
| ide_sector_start_dma(s, IDE_DMA_WRITE); |
| |
| s->media_changed = 1; |
| |
| return false; |
| } |
| |
| static bool cmd_flush_cache(IDEState *s, uint8_t cmd) |
| { |
| ide_flush_cache(s); |
| return false; |
| } |
| |
| static bool cmd_seek(IDEState *s, uint8_t cmd) |
| { |
| /* XXX: Check that seek is within bounds */ |
| return true; |
| } |
| |
| static bool cmd_read_native_max(IDEState *s, uint8_t cmd) |
| { |
| bool lba48 = (cmd == WIN_READ_NATIVE_MAX_EXT); |
| |
| /* Refuse if no sectors are addressable (e.g. medium not inserted) */ |
| if (s->nb_sectors == 0) { |
| ide_abort_command(s); |
| return true; |
| } |
| |
| ide_cmd_lba48_transform(s, lba48); |
| ide_set_sector(s, s->nb_sectors - 1); |
| |
| return true; |
| } |
| |
| static bool cmd_check_power_mode(IDEState *s, uint8_t cmd) |
| { |
| s->nsector = 0xff; /* device active or idle */ |
| return true; |
| } |
| |
| static bool cmd_set_features(IDEState *s, uint8_t cmd) |
| { |
| uint16_t *identify_data; |
| |
| if (!s->blk) { |
| ide_abort_command(s); |
| return true; |
| } |
| |
| /* XXX: valid for CDROM ? */ |
| switch (s->feature) { |
| case 0x02: /* write cache enable */ |
| blk_set_enable_write_cache(s->blk, true); |
| identify_data = (uint16_t *)s->identify_data; |
| put_le16(identify_data + 85, (1 << 14) | (1 << 5) | 1); |
| return true; |
| case 0x82: /* write cache disable */ |
| blk_set_enable_write_cache(s->blk, false); |
| identify_data = (uint16_t *)s->identify_data; |
| put_le16(identify_data + 85, (1 << 14) | 1); |
| ide_flush_cache(s); |
| return false; |
| case 0xcc: /* reverting to power-on defaults enable */ |
| case 0x66: /* reverting to power-on defaults disable */ |
| case 0xaa: /* read look-ahead enable */ |
| case 0x55: /* read look-ahead disable */ |
| case 0x05: /* set advanced power management mode */ |
| case 0x85: /* disable advanced power management mode */ |
| case 0x69: /* NOP */ |
| case 0x67: /* NOP */ |
| case 0x96: /* NOP */ |
| case 0x9a: /* NOP */ |
| case 0x42: /* enable Automatic Acoustic Mode */ |
| case 0xc2: /* disable Automatic Acoustic Mode */ |
| return true; |
| case 0x03: /* set transfer mode */ |
| { |
| uint8_t val = s->nsector & 0x07; |
| identify_data = (uint16_t *)s->identify_data; |
| |
| switch (s->nsector >> 3) { |
| case 0x00: /* pio default */ |
| case 0x01: /* pio mode */ |
| put_le16(identify_data + 62, 0x07); |
| put_le16(identify_data + 63, 0x07); |
| put_le16(identify_data + 88, 0x3f); |
| break; |
| case 0x02: /* sigle word dma mode*/ |
| put_le16(identify_data + 62, 0x07 | (1 << (val + 8))); |
| put_le16(identify_data + 63, 0x07); |
| put_le16(identify_data + 88, 0x3f); |
| break; |
| case 0x04: /* mdma mode */ |
| put_le16(identify_data + 62, 0x07); |
| put_le16(identify_data + 63, 0x07 | (1 << (val + 8))); |
| put_le16(identify_data + 88, 0x3f); |
| break; |
| case 0x08: /* udma mode */ |
| put_le16(identify_data + 62, 0x07); |
| put_le16(identify_data + 63, 0x07); |
| put_le16(identify_data + 88, 0x3f | (1 << (val + 8))); |
| break; |
| default: |
| goto abort_cmd; |
| } |
| return true; |
| } |
| } |
| |
| abort_cmd: |
| ide_abort_command(s); |
| return true; |
| } |
| |
| |
| /*** ATAPI commands ***/ |
| |
| static bool cmd_identify_packet(IDEState *s, uint8_t cmd) |
| { |
| ide_atapi_identify(s); |
| s->status = READY_STAT | SEEK_STAT; |
| ide_transfer_start(s, s->io_buffer, 512, ide_transfer_stop); |
| ide_set_irq(s->bus); |
| return false; |
| } |
| |
| static bool cmd_exec_dev_diagnostic(IDEState *s, uint8_t cmd) |
| { |
| ide_set_signature(s); |
| |
| if (s->drive_kind == IDE_CD) { |
| s->status = 0; /* ATAPI spec (v6) section 9.10 defines packet |
| * devices to return a clear status register |
| * with READY_STAT *not* set. */ |
| s->error = 0x01; |
| } else { |
| s->status = READY_STAT | SEEK_STAT; |
| /* The bits of the error register are not as usual for this command! |
| * They are part of the regular output (this is why ERR_STAT isn't set) |
| * Device 0 passed, Device 1 passed or not present. */ |
| s->error = 0x01; |
| ide_set_irq(s->bus); |
| } |
| |
| return false; |
| } |
| |
| static bool cmd_packet(IDEState *s, uint8_t cmd) |
| { |
| /* overlapping commands not supported */ |
| if (s->feature & 0x02) { |
| ide_abort_command(s); |
| return true; |
| } |
| |
| s->status = READY_STAT | SEEK_STAT; |
| s->atapi_dma = s->feature & 1; |
| if (s->atapi_dma) { |
| s->dma_cmd = IDE_DMA_ATAPI; |
| } |
| s->nsector = 1; |
| ide_transfer_start(s, s->io_buffer, ATAPI_PACKET_SIZE, |
| ide_atapi_cmd); |
| return false; |
| } |
| |
| |
| /*** CF-ATA commands ***/ |
| |
| static bool cmd_cfa_req_ext_error_code(IDEState *s, uint8_t cmd) |
| { |
| s->error = 0x09; /* miscellaneous error */ |
| s->status = READY_STAT | SEEK_STAT; |
| ide_set_irq(s->bus); |
| |
| return false; |
| } |
| |
| static bool cmd_cfa_erase_sectors(IDEState *s, uint8_t cmd) |
| { |
| /* WIN_SECURITY_FREEZE_LOCK has the same ID as CFA_WEAR_LEVEL and is |
| * required for Windows 8 to work with AHCI */ |
| |
| if (cmd == CFA_WEAR_LEVEL) { |
| s->nsector = 0; |
| } |
| |
| if (cmd == CFA_ERASE_SECTORS) { |
| s->media_changed = 1; |
| } |
| |
| return true; |
| } |
| |
| static bool cmd_cfa_translate_sector(IDEState *s, uint8_t cmd) |
| { |
| s->status = READY_STAT | SEEK_STAT; |
| |
| memset(s->io_buffer, 0, 0x200); |
| s->io_buffer[0x00] = s->hcyl; /* Cyl MSB */ |
| s->io_buffer[0x01] = s->lcyl; /* Cyl LSB */ |
| s->io_buffer[0x02] = s->select; /* Head */ |
| s->io_buffer[0x03] = s->sector; /* Sector */ |
| s->io_buffer[0x04] = ide_get_sector(s) >> 16; /* LBA MSB */ |
| s->io_buffer[0x05] = ide_get_sector(s) >> 8; /* LBA */ |
| s->io_buffer[0x06] = ide_get_sector(s) >> 0; /* LBA LSB */ |
| s->io_buffer[0x13] = 0x00; /* Erase flag */ |
| s->io_buffer[0x18] = 0x00; /* Hot count */ |
| s->io_buffer[0x19] = 0x00; /* Hot count */ |
| s->io_buffer[0x1a] = 0x01; /* Hot count */ |
| |
| ide_transfer_start(s, s->io_buffer, 0x200, ide_transfer_stop); |
| ide_set_irq(s->bus); |
| |
| return false; |
| } |
| |
| static bool cmd_cfa_access_metadata_storage(IDEState *s, uint8_t cmd) |
| { |
| switch (s->feature) { |
| case 0x02: /* Inquiry Metadata Storage */ |
| ide_cfata_metadata_inquiry(s); |
| break; |
| case 0x03: /* Read Metadata Storage */ |
| ide_cfata_metadata_read(s); |
| break; |
| case 0x04: /* Write Metadata Storage */ |
| ide_cfata_metadata_write(s); |
| break; |
| default: |
| ide_abort_command(s); |
| return true; |
| } |
| |
| ide_transfer_start(s, s->io_buffer, 0x200, ide_transfer_stop); |
| s->status = 0x00; /* NOTE: READY is _not_ set */ |
| ide_set_irq(s->bus); |
| |
| return false; |
| } |
| |
| static bool cmd_ibm_sense_condition(IDEState *s, uint8_t cmd) |
| { |
| switch (s->feature) { |
| case 0x01: /* sense temperature in device */ |
| s->nsector = 0x50; /* +20 C */ |
| break; |
| default: |
| ide_abort_command(s); |
| return true; |
| } |
| |
| return true; |
| } |
| |
| |
| /*** SMART commands ***/ |
| |
| static bool cmd_smart(IDEState *s, uint8_t cmd) |
| { |
| int n; |
| |
| if (s->hcyl != 0xc2 || s->lcyl != 0x4f) { |
| goto abort_cmd; |
| } |
| |
| if (!s->smart_enabled && s->feature != SMART_ENABLE) { |
| goto abort_cmd; |
| } |
| |
| switch (s->feature) { |
| case SMART_DISABLE: |
| s->smart_enabled = 0; |
| return true; |
| |
| case SMART_ENABLE: |
| s->smart_enabled = 1; |
| return true; |
| |
| case SMART_ATTR_AUTOSAVE: |
| switch (s->sector) { |
| case 0x00: |
| s->smart_autosave = 0; |
| break; |
| case 0xf1: |
| s->smart_autosave = 1; |
| break; |
| default: |
| goto abort_cmd; |
| } |
| return true; |
| |
| case SMART_STATUS: |
| if (!s->smart_errors) { |
| s->hcyl = 0xc2; |
| s->lcyl = 0x4f; |
| } else { |
| s->hcyl = 0x2c; |
| s->lcyl = 0xf4; |
| } |
| return true; |
| |
| case SMART_READ_THRESH: |
| memset(s->io_buffer, 0, 0x200); |
| s->io_buffer[0] = 0x01; /* smart struct version */ |
| |
| for (n = 0; n < ARRAY_SIZE(smart_attributes); n++) { |
| s->io_buffer[2 + 0 + (n * 12)] = smart_attributes[n][0]; |
| s->io_buffer[2 + 1 + (n * 12)] = smart_attributes[n][11]; |
| } |
| |
| /* checksum */ |
| for (n = 0; n < 511; n++) { |
| s->io_buffer[511] += s->io_buffer[n]; |
| } |
| s->io_buffer[511] = 0x100 - s->io_buffer[511]; |
| |
| s->status = READY_STAT | SEEK_STAT; |
| ide_transfer_start(s, s->io_buffer, 0x200, ide_transfer_stop); |
| ide_set_irq(s->bus); |
| return false; |
| |
| case SMART_READ_DATA: |
| memset(s->io_buffer, 0, 0x200); |
| s->io_buffer[0] = 0x01; /* smart struct version */ |
| |
| for (n = 0; n < ARRAY_SIZE(smart_attributes); n++) { |
| int i; |
| for (i = 0; i < 11; i++) { |
| s->io_buffer[2 + i + (n * 12)] = smart_attributes[n][i]; |
| } |
| } |
| |
| s->io_buffer[362] = 0x02 | (s->smart_autosave ? 0x80 : 0x00); |
| if (s->smart_selftest_count == 0) { |
| s->io_buffer[363] = 0; |
| } else { |
| s->io_buffer[363] = |
| s->smart_selftest_data[3 + |
| (s->smart_selftest_count - 1) * |
| 24]; |
| } |
| s->io_buffer[364] = 0x20; |
| s->io_buffer[365] = 0x01; |
| /* offline data collection capacity: execute + self-test*/ |
| s->io_buffer[367] = (1 << 4 | 1 << 3 | 1); |
| s->io_buffer[368] = 0x03; /* smart capability (1) */ |
| s->io_buffer[369] = 0x00; /* smart capability (2) */ |
| s->io_buffer[370] = 0x01; /* error logging supported */ |
| s->io_buffer[372] = 0x02; /* minutes for poll short test */ |
| s->io_buffer[373] = 0x36; /* minutes for poll ext test */ |
| s->io_buffer[374] = 0x01; /* minutes for poll conveyance */ |
| |
| for (n = 0; n < 511; n++) { |
| s->io_buffer[511] += s->io_buffer[n]; |
| } |
| s->io_buffer[511] = 0x100 - s->io_buffer[511]; |
| |
| s->status = READY_STAT | SEEK_STAT; |
| ide_transfer_start(s, s->io_buffer, 0x200, ide_transfer_stop); |
| ide_set_irq(s->bus); |
| return false; |
| |
| case SMART_READ_LOG: |
| switch (s->sector) { |
| case 0x01: /* summary smart error log */ |
| memset(s->io_buffer, 0, 0x200); |
| s->io_buffer[0] = 0x01; |
| s->io_buffer[1] = 0x00; /* no error entries */ |
| s->io_buffer[452] = s->smart_errors & 0xff; |
| s->io_buffer[453] = (s->smart_errors & 0xff00) >> 8; |
| |
| for (n = 0; n < 511; n++) { |
| s->io_buffer[511] += s->io_buffer[n]; |
| } |
| s->io_buffer[511] = 0x100 - s->io_buffer[511]; |
| break; |
| case 0x06: /* smart self test log */ |
| memset(s->io_buffer, 0, 0x200); |
| s->io_buffer[0] = 0x01; |
| if (s->smart_selftest_count == 0) { |
| s->io_buffer[508] = 0; |
| } else { |
| s->io_buffer[508] = s->smart_selftest_count; |
| for (n = 2; n < 506; n++) { |
| s->io_buffer[n] = s->smart_selftest_data[n]; |
| } |
| } |
| |
| for (n = 0; n < 511; n++) { |
| s->io_buffer[511] += s->io_buffer[n]; |
| } |
| s->io_buffer[511] = 0x100 - s->io_buffer[511]; |
| break; |
| default: |
| goto abort_cmd; |
| } |
| s->status = READY_STAT | SEEK_STAT; |
| ide_transfer_start(s, s->io_buffer, 0x200, ide_transfer_stop); |
| ide_set_irq(s->bus); |
| return false; |
| |
| case SMART_EXECUTE_OFFLINE: |
| switch (s->sector) { |
| case 0: /* off-line routine */ |
| case 1: /* short self test */ |
| case 2: /* extended self test */ |
| s->smart_selftest_count++; |
| if (s->smart_selftest_count > 21) { |
| s->smart_selftest_count = 1; |
| } |
| n = 2 + (s->smart_selftest_count - 1) * 24; |
| s->smart_selftest_data[n] = s->sector; |
| s->smart_selftest_data[n + 1] = 0x00; /* OK and finished */ |
| s->smart_selftest_data[n + 2] = 0x34; /* hour count lsb */ |
| s->smart_selftest_data[n + 3] = 0x12; /* hour count msb */ |
| break; |
| default: |
| goto abort_cmd; |
| } |
| return true; |
| } |
| |
| abort_cmd: |
| ide_abort_command(s); |
| return true; |
| } |
| |
| #define HD_OK (1u << IDE_HD) |
| #define CD_OK (1u << IDE_CD) |
| #define CFA_OK (1u << IDE_CFATA) |
| #define HD_CFA_OK (HD_OK | CFA_OK) |
| #define ALL_OK (HD_OK | CD_OK | CFA_OK) |
| |
| /* Set the Disk Seek Completed status bit during completion */ |
| #define SET_DSC (1u << 8) |
| |
| /* See ACS-2 T13/2015-D Table B.2 Command codes */ |
| static const struct { |
| /* Returns true if the completion code should be run */ |
| bool (*handler)(IDEState *s, uint8_t cmd); |
| int flags; |
| } ide_cmd_table[0x100] = { |
| /* NOP not implemented, mandatory for CD */ |
| [CFA_REQ_EXT_ERROR_CODE] = { cmd_cfa_req_ext_error_code, CFA_OK }, |
| [WIN_DSM] = { cmd_data_set_management, HD_CFA_OK }, |
| [WIN_DEVICE_RESET] = { cmd_device_reset, CD_OK }, |
| [WIN_RECAL] = { cmd_nop, HD_CFA_OK | SET_DSC}, |
| [WIN_READ] = { cmd_read_pio, ALL_OK }, |
| [WIN_READ_ONCE] = { cmd_read_pio, HD_CFA_OK }, |
| [WIN_READ_EXT] = { cmd_read_pio, HD_CFA_OK }, |
| [WIN_READDMA_EXT] = { cmd_read_dma, HD_CFA_OK }, |
| [WIN_READ_NATIVE_MAX_EXT] = { cmd_read_native_max, HD_CFA_OK | SET_DSC }, |
| [WIN_MULTREAD_EXT] = { cmd_read_multiple, HD_CFA_OK }, |
| [WIN_WRITE] = { cmd_write_pio, HD_CFA_OK }, |
| [WIN_WRITE_ONCE] = { cmd_write_pio, HD_CFA_OK }, |
| [WIN_WRITE_EXT] = { cmd_write_pio, HD_CFA_OK }, |
| [WIN_WRITEDMA_EXT] = { cmd_write_dma, HD_CFA_OK }, |
| [CFA_WRITE_SECT_WO_ERASE] = { cmd_write_pio, CFA_OK }, |
| [WIN_MULTWRITE_EXT] = { cmd_write_multiple, HD_CFA_OK }, |
| [WIN_WRITE_VERIFY] = { cmd_write_pio, HD_CFA_OK }, |
| [WIN_VERIFY] = { cmd_verify, HD_CFA_OK | SET_DSC }, |
| [WIN_VERIFY_ONCE] = { cmd_verify, HD_CFA_OK | SET_DSC }, |
| [WIN_VERIFY_EXT] = { cmd_verify, HD_CFA_OK | SET_DSC }, |
| [WIN_SEEK] = { cmd_seek, HD_CFA_OK | SET_DSC }, |
| [CFA_TRANSLATE_SECTOR] = { cmd_cfa_translate_sector, CFA_OK }, |
| [WIN_DIAGNOSE] = { cmd_exec_dev_diagnostic, ALL_OK }, |
| [WIN_SPECIFY] = { cmd_nop, HD_CFA_OK | SET_DSC }, |
| [WIN_STANDBYNOW2] = { cmd_nop, HD_CFA_OK }, |
| [WIN_IDLEIMMEDIATE2] = { cmd_nop, HD_CFA_OK }, |
| [WIN_STANDBY2] = { cmd_nop, HD_CFA_OK }, |
| [WIN_SETIDLE2] = { cmd_nop, HD_CFA_OK }, |
| [WIN_CHECKPOWERMODE2] = { cmd_check_power_mode, HD_CFA_OK | SET_DSC }, |
| [WIN_SLEEPNOW2] = { cmd_nop, HD_CFA_OK }, |
| [WIN_PACKETCMD] = { cmd_packet, CD_OK }, |
| [WIN_PIDENTIFY] = { cmd_identify_packet, CD_OK }, |
| [WIN_SMART] = { cmd_smart, HD_CFA_OK | SET_DSC }, |
| [CFA_ACCESS_METADATA_STORAGE] = { cmd_cfa_access_metadata_storage, CFA_OK }, |
| [CFA_ERASE_SECTORS] = { cmd_cfa_erase_sectors, CFA_OK | SET_DSC }, |
| [WIN_MULTREAD] = { cmd_read_multiple, HD_CFA_OK }, |
| [WIN_MULTWRITE] = { cmd_write_multiple, HD_CFA_OK }, |
| [WIN_SETMULT] = { cmd_set_multiple_mode, HD_CFA_OK | SET_DSC }, |
| [WIN_READDMA] = { cmd_read_dma, HD_CFA_OK }, |
| [WIN_READDMA_ONCE] = { cmd_read_dma, HD_CFA_OK }, |
| [WIN_WRITEDMA] = { cmd_write_dma, HD_CFA_OK }, |
| [WIN_WRITEDMA_ONCE] = { cmd_write_dma, HD_CFA_OK }, |
| [CFA_WRITE_MULTI_WO_ERASE] = { cmd_write_multiple, CFA_OK }, |
| [WIN_STANDBYNOW1] = { cmd_nop, HD_CFA_OK }, |
| [WIN_IDLEIMMEDIATE] = { cmd_nop, HD_CFA_OK }, |
| [WIN_STANDBY] = { cmd_nop, HD_CFA_OK }, |
| [WIN_SETIDLE1] = { cmd_nop, HD_CFA_OK }, |
| [WIN_CHECKPOWERMODE1] = { cmd_check_power_mode, HD_CFA_OK | SET_DSC }, |
| [WIN_SLEEPNOW1] = { cmd_nop, HD_CFA_OK }, |
| [WIN_FLUSH_CACHE] = { cmd_flush_cache, ALL_OK }, |
| [WIN_FLUSH_CACHE_EXT] = { cmd_flush_cache, HD_CFA_OK }, |
| [WIN_IDENTIFY] = { cmd_identify, ALL_OK }, |
| [WIN_SETFEATURES] = { cmd_set_features, ALL_OK | SET_DSC }, |
| [IBM_SENSE_CONDITION] = { cmd_ibm_sense_condition, CFA_OK | SET_DSC }, |
| [CFA_WEAR_LEVEL] = { cmd_cfa_erase_sectors, HD_CFA_OK | SET_DSC }, |
| [WIN_READ_NATIVE_MAX] = { cmd_read_native_max, HD_CFA_OK | SET_DSC }, |
| }; |
| |
| static bool ide_cmd_permitted(IDEState *s, uint32_t cmd) |
| { |
| return cmd < ARRAY_SIZE(ide_cmd_table) |
| && (ide_cmd_table[cmd].flags & (1u << s->drive_kind)); |
| } |
| |
| void ide_exec_cmd(IDEBus *bus, uint32_t val) |
| { |
| IDEState *s; |
| bool complete; |
| |
| s = idebus_active_if(bus); |
| trace_ide_exec_cmd(bus, s, val); |
| |
| /* ignore commands to non existent slave */ |
| if (s != bus->ifs && !s->blk) { |
| return; |
| } |
| |
| /* Only RESET is allowed while BSY and/or DRQ are set, |
| * and only to ATAPI devices. */ |
| if (s->status & (BUSY_STAT|DRQ_STAT)) { |
| if (val != WIN_DEVICE_RESET || s->drive_kind != IDE_CD) { |
| return; |
| } |
| } |
| |
| if (!ide_cmd_permitted(s, val)) { |
| ide_abort_command(s); |
| ide_set_irq(s->bus); |
| return; |
| } |
| |
| s->status = READY_STAT | BUSY_STAT; |
| s->error = 0; |
| s->io_buffer_offset = 0; |
| |
| complete = ide_cmd_table[val].handler(s, val); |
| if (complete) { |
| s->status &= ~BUSY_STAT; |
| assert(!!s->error == !!(s->status & ERR_STAT)); |
| |
| if ((ide_cmd_table[val].flags & SET_DSC) && !s->error) { |
| s->status |= SEEK_STAT; |
| } |
| |
| ide_cmd_done(s); |
| ide_set_irq(s->bus); |
| } |
| } |
| |
| /* IOport [R]ead [R]egisters */ |
| enum ATA_IOPORT_RR { |
| ATA_IOPORT_RR_DATA = 0, |
| ATA_IOPORT_RR_ERROR = 1, |
| ATA_IOPORT_RR_SECTOR_COUNT = 2, |
| ATA_IOPORT_RR_SECTOR_NUMBER = 3, |
| ATA_IOPORT_RR_CYLINDER_LOW = 4, |
| ATA_IOPORT_RR_CYLINDER_HIGH = 5, |
| ATA_IOPORT_RR_DEVICE_HEAD = 6, |
| ATA_IOPORT_RR_STATUS = 7, |
| ATA_IOPORT_RR_NUM_REGISTERS, |
| }; |
| |
| const char *ATA_IOPORT_RR_lookup[ATA_IOPORT_RR_NUM_REGISTERS] = { |
| [ATA_IOPORT_RR_DATA] = "Data", |
| [ATA_IOPORT_RR_ERROR] = "Error", |
| [ATA_IOPORT_RR_SECTOR_COUNT] = "Sector Count", |
| [ATA_IOPORT_RR_SECTOR_NUMBER] = "Sector Number", |
| [ATA_IOPORT_RR_CYLINDER_LOW] = "Cylinder Low", |
| [ATA_IOPORT_RR_CYLINDER_HIGH] = "Cylinder High", |
| [ATA_IOPORT_RR_DEVICE_HEAD] = "Device/Head", |
| [ATA_IOPORT_RR_STATUS] = "Status" |
| }; |
| |
| uint32_t ide_ioport_read(void *opaque, uint32_t addr) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s = idebus_active_if(bus); |
| uint32_t reg_num; |
| int ret, hob; |
| |
| reg_num = addr & 7; |
| hob = bus->cmd & (IDE_CTRL_HOB); |
| switch (reg_num) { |
| case ATA_IOPORT_RR_DATA: |
| ret = 0xff; |
| break; |
| case ATA_IOPORT_RR_ERROR: |
| if ((!bus->ifs[0].blk && !bus->ifs[1].blk) || |
| (s != bus->ifs && !s->blk)) { |
| ret = 0; |
| } else if (!hob) { |
| ret = s->error; |
| } else { |
| ret = s->hob_feature; |
| } |
| break; |
| case ATA_IOPORT_RR_SECTOR_COUNT: |
| if (!bus->ifs[0].blk && !bus->ifs[1].blk) { |
| ret = 0; |
| } else if (!hob) { |
| ret = s->nsector & 0xff; |
| } else { |
| ret = s->hob_nsector; |
| } |
| break; |
| case ATA_IOPORT_RR_SECTOR_NUMBER: |
| if (!bus->ifs[0].blk && !bus->ifs[1].blk) { |
| ret = 0; |
| } else if (!hob) { |
| ret = s->sector; |
| } else { |
| ret = s->hob_sector; |
| } |
| break; |
| case ATA_IOPORT_RR_CYLINDER_LOW: |
| if (!bus->ifs[0].blk && !bus->ifs[1].blk) { |
| ret = 0; |
| } else if (!hob) { |
| ret = s->lcyl; |
| } else { |
| ret = s->hob_lcyl; |
| } |
| break; |
| case ATA_IOPORT_RR_CYLINDER_HIGH: |
| if (!bus->ifs[0].blk && !bus->ifs[1].blk) { |
| ret = 0; |
| } else if (!hob) { |
| ret = s->hcyl; |
| } else { |
| ret = s->hob_hcyl; |
| } |
| break; |
| case ATA_IOPORT_RR_DEVICE_HEAD: |
| if (!bus->ifs[0].blk && !bus->ifs[1].blk) { |
| ret = 0; |
| } else { |
| ret = s->select; |
| } |
| break; |
| default: |
| case ATA_IOPORT_RR_STATUS: |
| if ((!bus->ifs[0].blk && !bus->ifs[1].blk) || |
| (s != bus->ifs && !s->blk)) { |
| ret = 0; |
| } else { |
| ret = s->status; |
| } |
| qemu_irq_lower(bus->irq); |
| break; |
| } |
| |
| trace_ide_ioport_read(addr, ATA_IOPORT_RR_lookup[reg_num], ret, bus, s); |
| return ret; |
| } |
| |
| uint32_t ide_status_read(void *opaque, uint32_t addr) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s = idebus_active_if(bus); |
| int ret; |
| |
| if ((!bus->ifs[0].blk && !bus->ifs[1].blk) || |
| (s != bus->ifs && !s->blk)) { |
| ret = 0; |
| } else { |
| ret = s->status; |
| } |
| |
| trace_ide_status_read(addr, ret, bus, s); |
| return ret; |
| } |
| |
| static void ide_perform_srst(IDEState *s) |
| { |
| s->status |= BUSY_STAT; |
| |
| /* Halt PIO (Via register state); PIO BH remains scheduled. */ |
| ide_transfer_halt(s); |
| |
| /* Cancel DMA -- may drain block device and invoke callbacks */ |
| ide_cancel_dma_sync(s); |
| |
| /* Cancel PIO callback, reset registers/signature, etc */ |
| ide_reset(s); |
| |
| /* perform diagnostic */ |
| cmd_exec_dev_diagnostic(s, WIN_DIAGNOSE); |
| } |
| |
| static void ide_bus_perform_srst(void *opaque) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s; |
| int i; |
| |
| for (i = 0; i < 2; i++) { |
| s = &bus->ifs[i]; |
| ide_perform_srst(s); |
| } |
| |
| bus->cmd &= ~IDE_CTRL_RESET; |
| } |
| |
| void ide_ctrl_write(void *opaque, uint32_t addr, uint32_t val) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s; |
| int i; |
| |
| trace_ide_ctrl_write(addr, val, bus); |
| |
| /* Device0 and Device1 each have their own control register, |
| * but QEMU models it as just one register in the controller. */ |
| if (!(bus->cmd & IDE_CTRL_RESET) && (val & IDE_CTRL_RESET)) { |
| for (i = 0; i < 2; i++) { |
| s = &bus->ifs[i]; |
| s->status |= BUSY_STAT; |
| } |
| replay_bh_schedule_oneshot_event(qemu_get_aio_context(), |
| ide_bus_perform_srst, bus); |
| } |
| |
| bus->cmd = val; |
| } |
| |
| /* |
| * Returns true if the running PIO transfer is a PIO out (i.e. data is |
| * transferred from the device to the guest), false if it's a PIO in |
| */ |
| static bool ide_is_pio_out(IDEState *s) |
| { |
| if (s->end_transfer_func == ide_sector_write || |
| s->end_transfer_func == ide_atapi_cmd) { |
| return false; |
| } else if (s->end_transfer_func == ide_sector_read || |
| s->end_transfer_func == ide_transfer_stop || |
| s->end_transfer_func == ide_atapi_cmd_reply_end || |
| s->end_transfer_func == ide_dummy_transfer_stop) { |
| return true; |
| } |
| |
| abort(); |
| } |
| |
| void ide_data_writew(void *opaque, uint32_t addr, uint32_t val) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s = idebus_active_if(bus); |
| uint8_t *p; |
| |
| trace_ide_data_writew(addr, val, bus, s); |
| |
| /* PIO data access allowed only when DRQ bit is set. The result of a write |
| * during PIO out is indeterminate, just ignore it. */ |
| if (!(s->status & DRQ_STAT) || ide_is_pio_out(s)) { |
| return; |
| } |
| |
| p = s->data_ptr; |
| if (p + 2 > s->data_end) { |
| return; |
| } |
| |
| *(uint16_t *)p = le16_to_cpu(val); |
| p += 2; |
| s->data_ptr = p; |
| if (p >= s->data_end) { |
| s->status &= ~DRQ_STAT; |
| s->end_transfer_func(s); |
| } |
| } |
| |
| uint32_t ide_data_readw(void *opaque, uint32_t addr) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s = idebus_active_if(bus); |
| uint8_t *p; |
| int ret; |
| |
| /* PIO data access allowed only when DRQ bit is set. The result of a read |
| * during PIO in is indeterminate, return 0 and don't move forward. */ |
| if (!(s->status & DRQ_STAT) || !ide_is_pio_out(s)) { |
| return 0; |
| } |
| |
| p = s->data_ptr; |
| if (p + 2 > s->data_end) { |
| return 0; |
| } |
| |
| ret = cpu_to_le16(*(uint16_t *)p); |
| p += 2; |
| s->data_ptr = p; |
| if (p >= s->data_end) { |
| s->status &= ~DRQ_STAT; |
| s->end_transfer_func(s); |
| } |
| |
| trace_ide_data_readw(addr, ret, bus, s); |
| return ret; |
| } |
| |
| void ide_data_writel(void *opaque, uint32_t addr, uint32_t val) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s = idebus_active_if(bus); |
| uint8_t *p; |
| |
| trace_ide_data_writel(addr, val, bus, s); |
| |
| /* PIO data access allowed only when DRQ bit is set. The result of a write |
| * during PIO out is indeterminate, just ignore it. */ |
| if (!(s->status & DRQ_STAT) || ide_is_pio_out(s)) { |
| return; |
| } |
| |
| p = s->data_ptr; |
| if (p + 4 > s->data_end) { |
| return; |
| } |
| |
| *(uint32_t *)p = le32_to_cpu(val); |
| p += 4; |
| s->data_ptr = p; |
| if (p >= s->data_end) { |
| s->status &= ~DRQ_STAT; |
| s->end_transfer_func(s); |
| } |
| } |
| |
| uint32_t ide_data_readl(void *opaque, uint32_t addr) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s = idebus_active_if(bus); |
| uint8_t *p; |
| int ret; |
| |
| /* PIO data access allowed only when DRQ bit is set. The result of a read |
| * during PIO in is indeterminate, return 0 and don't move forward. */ |
| if (!(s->status & DRQ_STAT) || !ide_is_pio_out(s)) { |
| ret = 0; |
| goto out; |
| } |
| |
| p = s->data_ptr; |
| if (p + 4 > s->data_end) { |
| return 0; |
| } |
| |
| ret = cpu_to_le32(*(uint32_t *)p); |
| p += 4; |
| s->data_ptr = p; |
| if (p >= s->data_end) { |
| s->status &= ~DRQ_STAT; |
| s->end_transfer_func(s); |
| } |
| |
| out: |
| trace_ide_data_readl(addr, ret, bus, s); |
| return ret; |
| } |
| |
| static void ide_dummy_transfer_stop(IDEState *s) |
| { |
| s->data_ptr = s->io_buffer; |
| s->data_end = s->io_buffer; |
| s->io_buffer[0] = 0xff; |
| s->io_buffer[1] = 0xff; |
| s->io_buffer[2] = 0xff; |
| s->io_buffer[3] = 0xff; |
| } |
| |
| void ide_bus_reset(IDEBus *bus) |
| { |
| bus->unit = 0; |
| bus->cmd = 0; |
| ide_reset(&bus->ifs[0]); |
| ide_reset(&bus->ifs[1]); |
| ide_clear_hob(bus); |
| |
| /* pending async DMA */ |
| if (bus->dma->aiocb) { |
| trace_ide_bus_reset_aio(); |
| blk_aio_cancel(bus->dma->aiocb); |
| bus->dma->aiocb = NULL; |
| } |
| |
| /* reset dma provider too */ |
| if (bus->dma->ops->reset) { |
| bus->dma->ops->reset(bus->dma); |
| } |
| } |
| |
| static bool ide_cd_is_tray_open(void *opaque) |
| { |
| return ((IDEState *)opaque)->tray_open; |
| } |
| |
| static bool ide_cd_is_medium_locked(void *opaque) |
| { |
| return ((IDEState *)opaque)->tray_locked; |
| } |
| |
| static void ide_resize_cb(void *opaque) |
| { |
| IDEState *s = opaque; |
| uint64_t nb_sectors; |
| |
| if (!s->identify_set) { |
| return; |
| } |
| |
| blk_get_geometry(s->blk, &nb_sectors); |
| s->nb_sectors = nb_sectors; |
| |
| /* Update the identify data buffer. */ |
| if (s->drive_kind == IDE_CFATA) { |
| ide_cfata_identify_size(s); |
| } else { |
| /* IDE_CD uses a different set of callbacks entirely. */ |
| assert(s->drive_kind != IDE_CD); |
| ide_identify_size(s); |
| } |
| } |
| |
| static const BlockDevOps ide_cd_block_ops = { |
| .change_media_cb = ide_cd_change_cb, |
| .eject_request_cb = ide_cd_eject_request_cb, |
| .is_tray_open = ide_cd_is_tray_open, |
| .is_medium_locked = ide_cd_is_medium_locked, |
| }; |
| |
| static const BlockDevOps ide_hd_block_ops = { |
| .resize_cb = ide_resize_cb, |
| }; |
| |
| int ide_init_drive(IDEState *s, BlockBackend *blk, IDEDriveKind kind, |
| const char *version, const char *serial, const char *model, |
| uint64_t wwn, |
| uint32_t cylinders, uint32_t heads, uint32_t secs, |
| int chs_trans, Error **errp) |
| { |
| uint64_t nb_sectors; |
| |
| s->blk = blk; |
| s->drive_kind = kind; |
| |
| blk_get_geometry(blk, &nb_sectors); |
| s->cylinders = cylinders; |
| s->heads = heads; |
| s->sectors = secs; |
| s->chs_trans = chs_trans; |
| s->nb_sectors = nb_sectors; |
| s->wwn = wwn; |
| /* The SMART values should be preserved across power cycles |
| but they aren't. */ |
| s->smart_enabled = 1; |
| s->smart_autosave = 1; |
| s->smart_errors = 0; |
| s->smart_selftest_count = 0; |
| if (kind == IDE_CD) { |
| blk_set_dev_ops(blk, &ide_cd_block_ops, s); |
| blk_set_guest_block_size(blk, 2048); |
| } else { |
| if (!blk_is_inserted(s->blk)) { |
| error_setg(errp, "Device needs media, but drive is empty"); |
| return -1; |
| } |
| if (!blk_is_writable(blk)) { |
| error_setg(errp, "Can't use a read-only drive"); |
| return -1; |
| } |
| blk_set_dev_ops(blk, &ide_hd_block_ops, s); |
| } |
| if (serial) { |
| pstrcpy(s->drive_serial_str, sizeof(s->drive_serial_str), serial); |
| } else { |
| snprintf(s->drive_serial_str, sizeof(s->drive_serial_str), |
| "QM%05d", s->drive_serial); |
| } |
| if (model) { |
| pstrcpy(s->drive_model_str, sizeof(s->drive_model_str), model); |
| } else { |
| switch (kind) { |
| case IDE_CD: |
| strcpy(s->drive_model_str, "QEMU DVD-ROM"); |
| break; |
| case IDE_CFATA: |
| strcpy(s->drive_model_str, "QEMU MICRODRIVE"); |
| break; |
| default: |
| strcpy(s->drive_model_str, "QEMU HARDDISK"); |
| break; |
| } |
| } |
| |
| if (version) { |
| pstrcpy(s->version, sizeof(s->version), version); |
| } else { |
| pstrcpy(s->version, sizeof(s->version), qemu_hw_version()); |
| } |
| |
| ide_reset(s); |
| blk_iostatus_enable(blk); |
| return 0; |
| } |
| |
| static void ide_init1(IDEBus *bus, int unit) |
| { |
| static int drive_serial = 1; |
| IDEState *s = &bus->ifs[unit]; |
| |
| s->bus = bus; |
| s->unit = unit; |
| s->drive_serial = drive_serial++; |
| /* we need at least 2k alignment for accessing CDROMs using O_DIRECT */ |
| s->io_buffer_total_len = IDE_DMA_BUF_SECTORS*512 + 4; |
| s->io_buffer = qemu_memalign(2048, s->io_buffer_total_len); |
| memset(s->io_buffer, 0, s->io_buffer_total_len); |
| |
| s->smart_selftest_data = blk_blockalign(s->blk, 512); |
| memset(s->smart_selftest_data, 0, 512); |
| |
| s->sector_write_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, |
| ide_sector_write_timer_cb, s); |
| } |
| |
| static int ide_nop_int(const IDEDMA *dma, bool is_write) |
| { |
| return 0; |
| } |
| |
| static void ide_nop(const IDEDMA *dma) |
| { |
| } |
| |
| static int32_t ide_nop_int32(const IDEDMA *dma, int32_t l) |
| { |
| return 0; |
| } |
| |
| static const IDEDMAOps ide_dma_nop_ops = { |
| .prepare_buf = ide_nop_int32, |
| .restart_dma = ide_nop, |
| .rw_buf = ide_nop_int, |
| }; |
| |
| static void ide_restart_dma(IDEState *s, enum ide_dma_cmd dma_cmd) |
| { |
| s->unit = s->bus->retry_unit; |
| ide_set_sector(s, s->bus->retry_sector_num); |
| s->nsector = s->bus->retry_nsector; |
| s->bus->dma->ops->restart_dma(s->bus->dma); |
| s->io_buffer_size = 0; |
| s->dma_cmd = dma_cmd; |
| ide_start_dma(s, ide_dma_cb); |
| } |
| |
| static void ide_restart_bh(void *opaque) |
| { |
| IDEBus *bus = opaque; |
| IDEState *s; |
| bool is_read; |
| int error_status; |
| |
| qemu_bh_delete(bus->bh); |
| bus->bh = NULL; |
| |
| error_status = bus->error_status; |
| if (bus->error_status == 0) { |
| return; |
| } |
| |
| s = idebus_active_if(bus); |
| is_read = (bus->error_status & IDE_RETRY_READ) != 0; |
| |
| /* The error status must be cleared before resubmitting the request: The |
| * request may fail again, and this case can only be distinguished if the |
| * called function can set a new error status. */ |
| bus->error_status = 0; |
| |
| /* The HBA has generically asked to be kicked on retry */ |
| if (error_status & IDE_RETRY_HBA) { |
| if (s->bus->dma->ops->restart) { |
| s->bus->dma->ops->restart(s->bus->dma); |
| } |
| } else if (IS_IDE_RETRY_DMA(error_status)) { |
| if (error_status & IDE_RETRY_TRIM) { |
| ide_restart_dma(s, IDE_DMA_TRIM); |
| } else { |
| ide_restart_dma(s, is_read ? IDE_DMA_READ : IDE_DMA_WRITE); |
| } |
| } else if (IS_IDE_RETRY_PIO(error_status)) { |
| if (is_read) { |
| ide_sector_read(s); |
| } else { |
| ide_sector_write(s); |
| } |
| } else if (error_status & IDE_RETRY_FLUSH) { |
| ide_flush_cache(s); |
| } else if (IS_IDE_RETRY_ATAPI(error_status)) { |
| assert(s->end_transfer_func == ide_atapi_cmd); |
| ide_atapi_dma_restart(s); |
| } else { |
| abort(); |
| } |
| } |
| |
| static void ide_restart_cb(void *opaque, bool running, RunState state) |
| { |
| IDEBus *bus = opaque; |
| |
| if (!running) |
| return; |
| |
| if (!bus->bh) { |
| bus->bh = qemu_bh_new(ide_restart_bh, bus); |
| qemu_bh_schedule(bus->bh); |
| } |
| } |
| |
| void ide_register_restart_cb(IDEBus *bus) |
| { |
| if (bus->dma->ops->restart_dma) { |
| bus->vmstate = qemu_add_vm_change_state_handler(ide_restart_cb, bus); |
| } |
| } |
| |
| static IDEDMA ide_dma_nop = { |
| .ops = &ide_dma_nop_ops, |
| .aiocb = NULL, |
| }; |
| |
| void ide_init2(IDEBus *bus, qemu_irq irq) |
| { |
| int i; |
| |
| for(i = 0; i < 2; i++) { |
| ide_init1(bus, i); |
| ide_reset(&bus->ifs[i]); |
| } |
| bus->irq = irq; |
| bus->dma = &ide_dma_nop; |
| } |
| |
| void ide_exit(IDEState *s) |
| { |
| timer_free(s->sector_write_timer); |
| qemu_vfree(s->smart_selftest_data); |
| qemu_vfree(s->io_buffer); |
| } |
| |
| static bool is_identify_set(void *opaque, int version_id) |
| { |
| IDEState *s = opaque; |
| |
| return s->identify_set != 0; |
| } |
| |
| static EndTransferFunc* transfer_end_table[] = { |
| ide_sector_read, |
| ide_sector_write, |
| ide_transfer_stop, |
| ide_atapi_cmd_reply_end, |
| ide_atapi_cmd, |
| ide_dummy_transfer_stop, |
| }; |
| |
| static int transfer_end_table_idx(EndTransferFunc *fn) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(transfer_end_table); i++) |
| if (transfer_end_table[i] == fn) |
| return i; |
| |
| return -1; |
| } |
| |
| static int ide_drive_post_load(void *opaque, int version_id) |
| { |
| IDEState *s = opaque; |
| |
| if (s->blk && s->identify_set) { |
| blk_set_enable_write_cache(s->blk, !!(s->identify_data[85] & (1 << 5))); |
| } |
| return 0; |
| } |
| |
| static int ide_drive_pio_post_load(void *opaque, int version_id) |
| { |
| IDEState *s = opaque; |
| |
| if (s->end_transfer_fn_idx >= ARRAY_SIZE(transfer_end_table)) { |
| return -EINVAL; |
| } |
| s->end_transfer_func = transfer_end_table[s->end_transfer_fn_idx]; |
| s->data_ptr = s->io_buffer + s->cur_io_buffer_offset; |
| s->data_end = s->data_ptr + s->cur_io_buffer_len; |
| s->atapi_dma = s->feature & 1; /* as per cmd_packet */ |
| |
| return 0; |
| } |
| |
| static int ide_drive_pio_pre_save(void *opaque) |
| { |
| IDEState *s = opaque; |
| int idx; |
| |
| s->cur_io_buffer_offset = s->data_ptr - s->io_buffer; |
| s->cur_io_buffer_len = s->data_end - s->data_ptr; |
| |
| idx = transfer_end_table_idx(s->end_transfer_func); |
| if (idx == -1) { |
| fprintf(stderr, "%s: invalid end_transfer_func for DRQ_STAT\n", |
| __func__); |
| s->end_transfer_fn_idx = 2; |
| } else { |
| s->end_transfer_fn_idx = idx; |
| } |
| |
| return 0; |
| } |
| |
| static bool ide_drive_pio_state_needed(void *opaque) |
| { |
| IDEState *s = opaque; |
| |
| return ((s->status & DRQ_STAT) != 0) |
| || (s->bus->error_status & IDE_RETRY_PIO); |
| } |
| |
| static bool ide_tray_state_needed(void *opaque) |
| { |
| IDEState *s = opaque; |
| |
| return s->tray_open || s->tray_locked; |
| } |
| |
| static bool ide_atapi_gesn_needed(void *opaque) |
| { |
| IDEState *s = opaque; |
| |
| return s->events.new_media || s->events.eject_request; |
| } |
| |
| static bool ide_error_needed(void *opaque) |
| { |
| IDEBus *bus = opaque; |
| |
| return (bus->error_status != 0); |
| } |
| |
| /* Fields for GET_EVENT_STATUS_NOTIFICATION ATAPI command */ |
| static const VMStateDescription vmstate_ide_atapi_gesn_state = { |
| .name ="ide_drive/atapi/gesn_state", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .needed = ide_atapi_gesn_needed, |
| .fields = (VMStateField[]) { |
| VMSTATE_BOOL(events.new_media, IDEState), |
| VMSTATE_BOOL(events.eject_request, IDEState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_ide_tray_state = { |
| .name = "ide_drive/tray_state", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .needed = ide_tray_state_needed, |
| .fields = (VMStateField[]) { |
| VMSTATE_BOOL(tray_open, IDEState), |
| VMSTATE_BOOL(tray_locked, IDEState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_ide_drive_pio_state = { |
| .name = "ide_drive/pio_state", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .pre_save = ide_drive_pio_pre_save, |
| .post_load = ide_drive_pio_post_load, |
| .needed = ide_drive_pio_state_needed, |
| .fields = (VMStateField[]) { |
| VMSTATE_INT32(req_nb_sectors, IDEState), |
| VMSTATE_VARRAY_INT32(io_buffer, IDEState, io_buffer_total_len, 1, |
| vmstate_info_uint8, uint8_t), |
| VMSTATE_INT32(cur_io_buffer_offset, IDEState), |
| VMSTATE_INT32(cur_io_buffer_len, IDEState), |
| VMSTATE_UINT8(end_transfer_fn_idx, IDEState), |
| VMSTATE_INT32(elementary_transfer_size, IDEState), |
| VMSTATE_INT32(packet_transfer_size, IDEState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| const VMStateDescription vmstate_ide_drive = { |
| .name = "ide_drive", |
| .version_id = 3, |
| .minimum_version_id = 0, |
| .post_load = ide_drive_post_load, |
| .fields = (VMStateField[]) { |
| VMSTATE_INT32(mult_sectors, IDEState), |
| VMSTATE_INT32(identify_set, IDEState), |
| VMSTATE_BUFFER_TEST(identify_data, IDEState, is_identify_set), |
| VMSTATE_UINT8(feature, IDEState), |
| VMSTATE_UINT8(error, IDEState), |
| VMSTATE_UINT32(nsector, IDEState), |
| VMSTATE_UINT8(sector, IDEState), |
| VMSTATE_UINT8(lcyl, IDEState), |
| VMSTATE_UINT8(hcyl, IDEState), |
| VMSTATE_UINT8(hob_feature, IDEState), |
| VMSTATE_UINT8(hob_sector, IDEState), |
| VMSTATE_UINT8(hob_nsector, IDEState), |
| VMSTATE_UINT8(hob_lcyl, IDEState), |
| VMSTATE_UINT8(hob_hcyl, IDEState), |
| VMSTATE_UINT8(select, IDEState), |
| VMSTATE_UINT8(status, IDEState), |
| VMSTATE_UINT8(lba48, IDEState), |
| VMSTATE_UINT8(sense_key, IDEState), |
| VMSTATE_UINT8(asc, IDEState), |
| VMSTATE_UINT8_V(cdrom_changed, IDEState, 3), |
| VMSTATE_END_OF_LIST() |
| }, |
| .subsections = (const VMStateDescription*[]) { |
| &vmstate_ide_drive_pio_state, |
| &vmstate_ide_tray_state, |
| &vmstate_ide_atapi_gesn_state, |
| NULL |
| } |
| }; |
| |
| static const VMStateDescription vmstate_ide_error_status = { |
| .name ="ide_bus/error", |
| .version_id = 2, |
| .minimum_version_id = 1, |
| .needed = ide_error_needed, |
| .fields = (VMStateField[]) { |
| VMSTATE_INT32(error_status, IDEBus), |
| VMSTATE_INT64_V(retry_sector_num, IDEBus, 2), |
| VMSTATE_UINT32_V(retry_nsector, IDEBus, 2), |
| VMSTATE_UINT8_V(retry_unit, IDEBus, 2), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| const VMStateDescription vmstate_ide_bus = { |
| .name = "ide_bus", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT8(cmd, IDEBus), |
| VMSTATE_UINT8(unit, IDEBus), |
| VMSTATE_END_OF_LIST() |
| }, |
| .subsections = (const VMStateDescription*[]) { |
| &vmstate_ide_error_status, |
| NULL |
| } |
| }; |
| |
| void ide_drive_get(DriveInfo **hd, int n) |
| { |
| int i; |
| |
| for (i = 0; i < n; i++) { |
| hd[i] = drive_get_by_index(IF_IDE, i); |
| } |
| } |