| /* |
| * QEMU PCI bus manager |
| * |
| * Copyright (c) 2004 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/datadir.h" |
| #include "qemu/units.h" |
| #include "hw/irq.h" |
| #include "hw/pci/pci.h" |
| #include "hw/pci/pci_bridge.h" |
| #include "hw/pci/pci_bus.h" |
| #include "hw/pci/pci_host.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/qdev-properties-system.h" |
| #include "migration/qemu-file-types.h" |
| #include "migration/vmstate.h" |
| #include "net/net.h" |
| #include "sysemu/numa.h" |
| #include "sysemu/runstate.h" |
| #include "sysemu/sysemu.h" |
| #include "hw/loader.h" |
| #include "qemu/error-report.h" |
| #include "qemu/range.h" |
| #include "trace.h" |
| #include "hw/pci/msi.h" |
| #include "hw/pci/msix.h" |
| #include "hw/hotplug.h" |
| #include "hw/boards.h" |
| #include "qapi/error.h" |
| #include "qemu/cutils.h" |
| #include "pci-internal.h" |
| |
| #include "hw/xen/xen.h" |
| #include "hw/i386/kvm/xen_evtchn.h" |
| |
| //#define DEBUG_PCI |
| #ifdef DEBUG_PCI |
| # define PCI_DPRINTF(format, ...) printf(format, ## __VA_ARGS__) |
| #else |
| # define PCI_DPRINTF(format, ...) do { } while (0) |
| #endif |
| |
| bool pci_available = true; |
| |
| static char *pcibus_get_dev_path(DeviceState *dev); |
| static char *pcibus_get_fw_dev_path(DeviceState *dev); |
| static void pcibus_reset_hold(Object *obj, ResetType type); |
| static bool pcie_has_upstream_port(PCIDevice *dev); |
| |
| static Property pci_props[] = { |
| DEFINE_PROP_PCI_DEVFN("addr", PCIDevice, devfn, -1), |
| DEFINE_PROP_STRING("romfile", PCIDevice, romfile), |
| DEFINE_PROP_UINT32("romsize", PCIDevice, romsize, -1), |
| DEFINE_PROP_UINT32("rombar", PCIDevice, rom_bar, 1), |
| DEFINE_PROP_BIT("multifunction", PCIDevice, cap_present, |
| QEMU_PCI_CAP_MULTIFUNCTION_BITNR, false), |
| DEFINE_PROP_BIT("x-pcie-lnksta-dllla", PCIDevice, cap_present, |
| QEMU_PCIE_LNKSTA_DLLLA_BITNR, true), |
| DEFINE_PROP_BIT("x-pcie-extcap-init", PCIDevice, cap_present, |
| QEMU_PCIE_EXTCAP_INIT_BITNR, true), |
| DEFINE_PROP_STRING("failover_pair_id", PCIDevice, |
| failover_pair_id), |
| DEFINE_PROP_UINT32("acpi-index", PCIDevice, acpi_index, 0), |
| DEFINE_PROP_BIT("x-pcie-err-unc-mask", PCIDevice, cap_present, |
| QEMU_PCIE_ERR_UNC_MASK_BITNR, true), |
| DEFINE_PROP_BIT("x-pcie-ari-nextfn-1", PCIDevice, cap_present, |
| QEMU_PCIE_ARI_NEXTFN_1_BITNR, false), |
| DEFINE_PROP_END_OF_LIST() |
| }; |
| |
| static const VMStateDescription vmstate_pcibus = { |
| .name = "PCIBUS", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (const VMStateField[]) { |
| VMSTATE_INT32_EQUAL(nirq, PCIBus, NULL), |
| VMSTATE_VARRAY_INT32(irq_count, PCIBus, |
| nirq, 0, vmstate_info_int32, |
| int32_t), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static gint g_cmp_uint32(gconstpointer a, gconstpointer b, gpointer user_data) |
| { |
| return a - b; |
| } |
| |
| static GSequence *pci_acpi_index_list(void) |
| { |
| static GSequence *used_acpi_index_list; |
| |
| if (!used_acpi_index_list) { |
| used_acpi_index_list = g_sequence_new(NULL); |
| } |
| return used_acpi_index_list; |
| } |
| |
| static void pci_init_bus_master(PCIDevice *pci_dev) |
| { |
| AddressSpace *dma_as = pci_device_iommu_address_space(pci_dev); |
| |
| memory_region_init_alias(&pci_dev->bus_master_enable_region, |
| OBJECT(pci_dev), "bus master", |
| dma_as->root, 0, memory_region_size(dma_as->root)); |
| memory_region_set_enabled(&pci_dev->bus_master_enable_region, false); |
| memory_region_add_subregion(&pci_dev->bus_master_container_region, 0, |
| &pci_dev->bus_master_enable_region); |
| } |
| |
| static void pcibus_machine_done(Notifier *notifier, void *data) |
| { |
| PCIBus *bus = container_of(notifier, PCIBus, machine_done); |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(bus->devices); ++i) { |
| if (bus->devices[i]) { |
| pci_init_bus_master(bus->devices[i]); |
| } |
| } |
| } |
| |
| static void pci_bus_realize(BusState *qbus, Error **errp) |
| { |
| PCIBus *bus = PCI_BUS(qbus); |
| |
| bus->machine_done.notify = pcibus_machine_done; |
| qemu_add_machine_init_done_notifier(&bus->machine_done); |
| |
| vmstate_register_any(NULL, &vmstate_pcibus, bus); |
| } |
| |
| static void pcie_bus_realize(BusState *qbus, Error **errp) |
| { |
| PCIBus *bus = PCI_BUS(qbus); |
| Error *local_err = NULL; |
| |
| pci_bus_realize(qbus, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| |
| /* |
| * A PCI-E bus can support extended config space if it's the root |
| * bus, or if the bus/bridge above it does as well |
| */ |
| if (pci_bus_is_root(bus)) { |
| bus->flags |= PCI_BUS_EXTENDED_CONFIG_SPACE; |
| } else { |
| PCIBus *parent_bus = pci_get_bus(bus->parent_dev); |
| |
| if (pci_bus_allows_extended_config_space(parent_bus)) { |
| bus->flags |= PCI_BUS_EXTENDED_CONFIG_SPACE; |
| } |
| } |
| } |
| |
| static void pci_bus_unrealize(BusState *qbus) |
| { |
| PCIBus *bus = PCI_BUS(qbus); |
| |
| qemu_remove_machine_init_done_notifier(&bus->machine_done); |
| |
| vmstate_unregister(NULL, &vmstate_pcibus, bus); |
| } |
| |
| static int pcibus_num(PCIBus *bus) |
| { |
| if (pci_bus_is_root(bus)) { |
| return 0; /* pci host bridge */ |
| } |
| return bus->parent_dev->config[PCI_SECONDARY_BUS]; |
| } |
| |
| static uint16_t pcibus_numa_node(PCIBus *bus) |
| { |
| return NUMA_NODE_UNASSIGNED; |
| } |
| |
| static void pci_bus_class_init(ObjectClass *klass, void *data) |
| { |
| BusClass *k = BUS_CLASS(klass); |
| PCIBusClass *pbc = PCI_BUS_CLASS(klass); |
| ResettableClass *rc = RESETTABLE_CLASS(klass); |
| |
| k->print_dev = pcibus_dev_print; |
| k->get_dev_path = pcibus_get_dev_path; |
| k->get_fw_dev_path = pcibus_get_fw_dev_path; |
| k->realize = pci_bus_realize; |
| k->unrealize = pci_bus_unrealize; |
| |
| rc->phases.hold = pcibus_reset_hold; |
| |
| pbc->bus_num = pcibus_num; |
| pbc->numa_node = pcibus_numa_node; |
| } |
| |
| static const TypeInfo pci_bus_info = { |
| .name = TYPE_PCI_BUS, |
| .parent = TYPE_BUS, |
| .instance_size = sizeof(PCIBus), |
| .class_size = sizeof(PCIBusClass), |
| .class_init = pci_bus_class_init, |
| }; |
| |
| static const TypeInfo cxl_interface_info = { |
| .name = INTERFACE_CXL_DEVICE, |
| .parent = TYPE_INTERFACE, |
| }; |
| |
| static const TypeInfo pcie_interface_info = { |
| .name = INTERFACE_PCIE_DEVICE, |
| .parent = TYPE_INTERFACE, |
| }; |
| |
| static const TypeInfo conventional_pci_interface_info = { |
| .name = INTERFACE_CONVENTIONAL_PCI_DEVICE, |
| .parent = TYPE_INTERFACE, |
| }; |
| |
| static void pcie_bus_class_init(ObjectClass *klass, void *data) |
| { |
| BusClass *k = BUS_CLASS(klass); |
| |
| k->realize = pcie_bus_realize; |
| } |
| |
| static const TypeInfo pcie_bus_info = { |
| .name = TYPE_PCIE_BUS, |
| .parent = TYPE_PCI_BUS, |
| .class_init = pcie_bus_class_init, |
| }; |
| |
| static const TypeInfo cxl_bus_info = { |
| .name = TYPE_CXL_BUS, |
| .parent = TYPE_PCIE_BUS, |
| .class_init = pcie_bus_class_init, |
| }; |
| |
| static void pci_update_mappings(PCIDevice *d); |
| static void pci_irq_handler(void *opaque, int irq_num, int level); |
| static void pci_add_option_rom(PCIDevice *pdev, bool is_default_rom, Error **); |
| static void pci_del_option_rom(PCIDevice *pdev); |
| |
| static uint16_t pci_default_sub_vendor_id = PCI_SUBVENDOR_ID_REDHAT_QUMRANET; |
| static uint16_t pci_default_sub_device_id = PCI_SUBDEVICE_ID_QEMU; |
| |
| PCIHostStateList pci_host_bridges; |
| |
| int pci_bar(PCIDevice *d, int reg) |
| { |
| uint8_t type; |
| |
| /* PCIe virtual functions do not have their own BARs */ |
| assert(!pci_is_vf(d)); |
| |
| if (reg != PCI_ROM_SLOT) |
| return PCI_BASE_ADDRESS_0 + reg * 4; |
| |
| type = d->config[PCI_HEADER_TYPE] & ~PCI_HEADER_TYPE_MULTI_FUNCTION; |
| return type == PCI_HEADER_TYPE_BRIDGE ? PCI_ROM_ADDRESS1 : PCI_ROM_ADDRESS; |
| } |
| |
| static inline int pci_irq_state(PCIDevice *d, int irq_num) |
| { |
| return (d->irq_state >> irq_num) & 0x1; |
| } |
| |
| static inline void pci_set_irq_state(PCIDevice *d, int irq_num, int level) |
| { |
| d->irq_state &= ~(0x1 << irq_num); |
| d->irq_state |= level << irq_num; |
| } |
| |
| static void pci_bus_change_irq_level(PCIBus *bus, int irq_num, int change) |
| { |
| assert(irq_num >= 0); |
| assert(irq_num < bus->nirq); |
| bus->irq_count[irq_num] += change; |
| bus->set_irq(bus->irq_opaque, irq_num, bus->irq_count[irq_num] != 0); |
| } |
| |
| static void pci_change_irq_level(PCIDevice *pci_dev, int irq_num, int change) |
| { |
| PCIBus *bus; |
| for (;;) { |
| int dev_irq = irq_num; |
| bus = pci_get_bus(pci_dev); |
| assert(bus->map_irq); |
| irq_num = bus->map_irq(pci_dev, irq_num); |
| trace_pci_route_irq(dev_irq, DEVICE(pci_dev)->canonical_path, irq_num, |
| pci_bus_is_root(bus) ? "root-complex" |
| : DEVICE(bus->parent_dev)->canonical_path); |
| if (bus->set_irq) |
| break; |
| pci_dev = bus->parent_dev; |
| } |
| pci_bus_change_irq_level(bus, irq_num, change); |
| } |
| |
| int pci_bus_get_irq_level(PCIBus *bus, int irq_num) |
| { |
| assert(irq_num >= 0); |
| assert(irq_num < bus->nirq); |
| return !!bus->irq_count[irq_num]; |
| } |
| |
| /* Update interrupt status bit in config space on interrupt |
| * state change. */ |
| static void pci_update_irq_status(PCIDevice *dev) |
| { |
| if (dev->irq_state) { |
| dev->config[PCI_STATUS] |= PCI_STATUS_INTERRUPT; |
| } else { |
| dev->config[PCI_STATUS] &= ~PCI_STATUS_INTERRUPT; |
| } |
| } |
| |
| void pci_device_deassert_intx(PCIDevice *dev) |
| { |
| int i; |
| for (i = 0; i < PCI_NUM_PINS; ++i) { |
| pci_irq_handler(dev, i, 0); |
| } |
| } |
| |
| static void pci_msi_trigger(PCIDevice *dev, MSIMessage msg) |
| { |
| MemTxAttrs attrs = {}; |
| |
| /* |
| * Xen uses the high bits of the address to contain some of the bits |
| * of the PIRQ#. Therefore we can't just send the write cycle and |
| * trust that it's caught by the APIC at 0xfee00000 because the |
| * target of the write might be e.g. 0x0x1000fee46000 for PIRQ#4166. |
| * So we intercept the delivery here instead of in kvm_send_msi(). |
| */ |
| if (xen_mode == XEN_EMULATE && |
| xen_evtchn_deliver_pirq_msi(msg.address, msg.data)) { |
| return; |
| } |
| attrs.requester_id = pci_requester_id(dev); |
| address_space_stl_le(&dev->bus_master_as, msg.address, msg.data, |
| attrs, NULL); |
| } |
| |
| static void pci_reset_regions(PCIDevice *dev) |
| { |
| int r; |
| if (pci_is_vf(dev)) { |
| return; |
| } |
| |
| for (r = 0; r < PCI_NUM_REGIONS; ++r) { |
| PCIIORegion *region = &dev->io_regions[r]; |
| if (!region->size) { |
| continue; |
| } |
| |
| if (!(region->type & PCI_BASE_ADDRESS_SPACE_IO) && |
| region->type & PCI_BASE_ADDRESS_MEM_TYPE_64) { |
| pci_set_quad(dev->config + pci_bar(dev, r), region->type); |
| } else { |
| pci_set_long(dev->config + pci_bar(dev, r), region->type); |
| } |
| } |
| } |
| |
| static void pci_do_device_reset(PCIDevice *dev) |
| { |
| pci_device_deassert_intx(dev); |
| assert(dev->irq_state == 0); |
| |
| /* Clear all writable bits */ |
| pci_word_test_and_clear_mask(dev->config + PCI_COMMAND, |
| pci_get_word(dev->wmask + PCI_COMMAND) | |
| pci_get_word(dev->w1cmask + PCI_COMMAND)); |
| pci_word_test_and_clear_mask(dev->config + PCI_STATUS, |
| pci_get_word(dev->wmask + PCI_STATUS) | |
| pci_get_word(dev->w1cmask + PCI_STATUS)); |
| /* Some devices make bits of PCI_INTERRUPT_LINE read only */ |
| pci_byte_test_and_clear_mask(dev->config + PCI_INTERRUPT_LINE, |
| pci_get_word(dev->wmask + PCI_INTERRUPT_LINE) | |
| pci_get_word(dev->w1cmask + PCI_INTERRUPT_LINE)); |
| dev->config[PCI_CACHE_LINE_SIZE] = 0x0; |
| pci_reset_regions(dev); |
| pci_update_mappings(dev); |
| |
| msi_reset(dev); |
| msix_reset(dev); |
| pcie_sriov_pf_reset(dev); |
| } |
| |
| /* |
| * This function is called on #RST and FLR. |
| * FLR if PCI_EXP_DEVCTL_BCR_FLR is set |
| */ |
| void pci_device_reset(PCIDevice *dev) |
| { |
| device_cold_reset(&dev->qdev); |
| pci_do_device_reset(dev); |
| } |
| |
| /* |
| * Trigger pci bus reset under a given bus. |
| * Called via bus_cold_reset on RST# assert, after the devices |
| * have been reset device_cold_reset-ed already. |
| */ |
| static void pcibus_reset_hold(Object *obj, ResetType type) |
| { |
| PCIBus *bus = PCI_BUS(obj); |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(bus->devices); ++i) { |
| if (bus->devices[i]) { |
| pci_do_device_reset(bus->devices[i]); |
| } |
| } |
| |
| for (i = 0; i < bus->nirq; i++) { |
| assert(bus->irq_count[i] == 0); |
| } |
| } |
| |
| static void pci_host_bus_register(DeviceState *host) |
| { |
| PCIHostState *host_bridge = PCI_HOST_BRIDGE(host); |
| |
| QLIST_INSERT_HEAD(&pci_host_bridges, host_bridge, next); |
| } |
| |
| static void pci_host_bus_unregister(DeviceState *host) |
| { |
| PCIHostState *host_bridge = PCI_HOST_BRIDGE(host); |
| |
| QLIST_REMOVE(host_bridge, next); |
| } |
| |
| PCIBus *pci_device_root_bus(const PCIDevice *d) |
| { |
| PCIBus *bus = pci_get_bus(d); |
| |
| while (!pci_bus_is_root(bus)) { |
| d = bus->parent_dev; |
| assert(d != NULL); |
| |
| bus = pci_get_bus(d); |
| } |
| |
| return bus; |
| } |
| |
| const char *pci_root_bus_path(PCIDevice *dev) |
| { |
| PCIBus *rootbus = pci_device_root_bus(dev); |
| PCIHostState *host_bridge = PCI_HOST_BRIDGE(rootbus->qbus.parent); |
| PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_GET_CLASS(host_bridge); |
| |
| assert(host_bridge->bus == rootbus); |
| |
| if (hc->root_bus_path) { |
| return (*hc->root_bus_path)(host_bridge, rootbus); |
| } |
| |
| return rootbus->qbus.name; |
| } |
| |
| bool pci_bus_bypass_iommu(PCIBus *bus) |
| { |
| PCIBus *rootbus = bus; |
| PCIHostState *host_bridge; |
| |
| if (!pci_bus_is_root(bus)) { |
| rootbus = pci_device_root_bus(bus->parent_dev); |
| } |
| |
| host_bridge = PCI_HOST_BRIDGE(rootbus->qbus.parent); |
| |
| assert(host_bridge->bus == rootbus); |
| |
| return host_bridge->bypass_iommu; |
| } |
| |
| static void pci_root_bus_internal_init(PCIBus *bus, DeviceState *parent, |
| MemoryRegion *mem, MemoryRegion *io, |
| uint8_t devfn_min) |
| { |
| assert(PCI_FUNC(devfn_min) == 0); |
| bus->devfn_min = devfn_min; |
| bus->slot_reserved_mask = 0x0; |
| bus->address_space_mem = mem; |
| bus->address_space_io = io; |
| bus->flags |= PCI_BUS_IS_ROOT; |
| |
| /* host bridge */ |
| QLIST_INIT(&bus->child); |
| |
| pci_host_bus_register(parent); |
| } |
| |
| static void pci_bus_uninit(PCIBus *bus) |
| { |
| pci_host_bus_unregister(BUS(bus)->parent); |
| } |
| |
| bool pci_bus_is_express(const PCIBus *bus) |
| { |
| return object_dynamic_cast(OBJECT(bus), TYPE_PCIE_BUS); |
| } |
| |
| void pci_root_bus_init(PCIBus *bus, size_t bus_size, DeviceState *parent, |
| const char *name, |
| MemoryRegion *mem, MemoryRegion *io, |
| uint8_t devfn_min, const char *typename) |
| { |
| qbus_init(bus, bus_size, typename, parent, name); |
| pci_root_bus_internal_init(bus, parent, mem, io, devfn_min); |
| } |
| |
| PCIBus *pci_root_bus_new(DeviceState *parent, const char *name, |
| MemoryRegion *mem, MemoryRegion *io, |
| uint8_t devfn_min, const char *typename) |
| { |
| PCIBus *bus; |
| |
| bus = PCI_BUS(qbus_new(typename, parent, name)); |
| pci_root_bus_internal_init(bus, parent, mem, io, devfn_min); |
| return bus; |
| } |
| |
| void pci_root_bus_cleanup(PCIBus *bus) |
| { |
| pci_bus_uninit(bus); |
| /* the caller of the unplug hotplug handler will delete this device */ |
| qbus_unrealize(BUS(bus)); |
| } |
| |
| void pci_bus_irqs(PCIBus *bus, pci_set_irq_fn set_irq, |
| void *irq_opaque, int nirq) |
| { |
| bus->set_irq = set_irq; |
| bus->irq_opaque = irq_opaque; |
| bus->nirq = nirq; |
| g_free(bus->irq_count); |
| bus->irq_count = g_malloc0(nirq * sizeof(bus->irq_count[0])); |
| } |
| |
| void pci_bus_map_irqs(PCIBus *bus, pci_map_irq_fn map_irq) |
| { |
| bus->map_irq = map_irq; |
| } |
| |
| void pci_bus_irqs_cleanup(PCIBus *bus) |
| { |
| bus->set_irq = NULL; |
| bus->map_irq = NULL; |
| bus->irq_opaque = NULL; |
| bus->nirq = 0; |
| g_free(bus->irq_count); |
| bus->irq_count = NULL; |
| } |
| |
| PCIBus *pci_register_root_bus(DeviceState *parent, const char *name, |
| pci_set_irq_fn set_irq, pci_map_irq_fn map_irq, |
| void *irq_opaque, |
| MemoryRegion *mem, MemoryRegion *io, |
| uint8_t devfn_min, int nirq, |
| const char *typename) |
| { |
| PCIBus *bus; |
| |
| bus = pci_root_bus_new(parent, name, mem, io, devfn_min, typename); |
| pci_bus_irqs(bus, set_irq, irq_opaque, nirq); |
| pci_bus_map_irqs(bus, map_irq); |
| return bus; |
| } |
| |
| void pci_unregister_root_bus(PCIBus *bus) |
| { |
| pci_bus_irqs_cleanup(bus); |
| pci_root_bus_cleanup(bus); |
| } |
| |
| int pci_bus_num(PCIBus *s) |
| { |
| return PCI_BUS_GET_CLASS(s)->bus_num(s); |
| } |
| |
| /* Returns the min and max bus numbers of a PCI bus hierarchy */ |
| void pci_bus_range(PCIBus *bus, int *min_bus, int *max_bus) |
| { |
| int i; |
| *min_bus = *max_bus = pci_bus_num(bus); |
| |
| for (i = 0; i < ARRAY_SIZE(bus->devices); ++i) { |
| PCIDevice *dev = bus->devices[i]; |
| |
| if (dev && IS_PCI_BRIDGE(dev)) { |
| *min_bus = MIN(*min_bus, dev->config[PCI_SECONDARY_BUS]); |
| *max_bus = MAX(*max_bus, dev->config[PCI_SUBORDINATE_BUS]); |
| } |
| } |
| } |
| |
| int pci_bus_numa_node(PCIBus *bus) |
| { |
| return PCI_BUS_GET_CLASS(bus)->numa_node(bus); |
| } |
| |
| static int get_pci_config_device(QEMUFile *f, void *pv, size_t size, |
| const VMStateField *field) |
| { |
| PCIDevice *s = container_of(pv, PCIDevice, config); |
| uint8_t *config; |
| int i; |
| |
| assert(size == pci_config_size(s)); |
| config = g_malloc(size); |
| |
| qemu_get_buffer(f, config, size); |
| for (i = 0; i < size; ++i) { |
| if ((config[i] ^ s->config[i]) & |
| s->cmask[i] & ~s->wmask[i] & ~s->w1cmask[i]) { |
| error_report("%s: Bad config data: i=0x%x read: %x device: %x " |
| "cmask: %x wmask: %x w1cmask:%x", __func__, |
| i, config[i], s->config[i], |
| s->cmask[i], s->wmask[i], s->w1cmask[i]); |
| g_free(config); |
| return -EINVAL; |
| } |
| } |
| memcpy(s->config, config, size); |
| |
| pci_update_mappings(s); |
| if (IS_PCI_BRIDGE(s)) { |
| pci_bridge_update_mappings(PCI_BRIDGE(s)); |
| } |
| |
| memory_region_set_enabled(&s->bus_master_enable_region, |
| pci_get_word(s->config + PCI_COMMAND) |
| & PCI_COMMAND_MASTER); |
| |
| g_free(config); |
| return 0; |
| } |
| |
| /* just put buffer */ |
| static int put_pci_config_device(QEMUFile *f, void *pv, size_t size, |
| const VMStateField *field, JSONWriter *vmdesc) |
| { |
| const uint8_t **v = pv; |
| assert(size == pci_config_size(container_of(pv, PCIDevice, config))); |
| qemu_put_buffer(f, *v, size); |
| |
| return 0; |
| } |
| |
| static const VMStateInfo vmstate_info_pci_config = { |
| .name = "pci config", |
| .get = get_pci_config_device, |
| .put = put_pci_config_device, |
| }; |
| |
| static int get_pci_irq_state(QEMUFile *f, void *pv, size_t size, |
| const VMStateField *field) |
| { |
| PCIDevice *s = container_of(pv, PCIDevice, irq_state); |
| uint32_t irq_state[PCI_NUM_PINS]; |
| int i; |
| for (i = 0; i < PCI_NUM_PINS; ++i) { |
| irq_state[i] = qemu_get_be32(f); |
| if (irq_state[i] != 0x1 && irq_state[i] != 0) { |
| fprintf(stderr, "irq state %d: must be 0 or 1.\n", |
| irq_state[i]); |
| return -EINVAL; |
| } |
| } |
| |
| for (i = 0; i < PCI_NUM_PINS; ++i) { |
| pci_set_irq_state(s, i, irq_state[i]); |
| } |
| |
| return 0; |
| } |
| |
| static int put_pci_irq_state(QEMUFile *f, void *pv, size_t size, |
| const VMStateField *field, JSONWriter *vmdesc) |
| { |
| int i; |
| PCIDevice *s = container_of(pv, PCIDevice, irq_state); |
| |
| for (i = 0; i < PCI_NUM_PINS; ++i) { |
| qemu_put_be32(f, pci_irq_state(s, i)); |
| } |
| |
| return 0; |
| } |
| |
| static const VMStateInfo vmstate_info_pci_irq_state = { |
| .name = "pci irq state", |
| .get = get_pci_irq_state, |
| .put = put_pci_irq_state, |
| }; |
| |
| static bool migrate_is_pcie(void *opaque, int version_id) |
| { |
| return pci_is_express((PCIDevice *)opaque); |
| } |
| |
| static bool migrate_is_not_pcie(void *opaque, int version_id) |
| { |
| return !pci_is_express((PCIDevice *)opaque); |
| } |
| |
| const VMStateDescription vmstate_pci_device = { |
| .name = "PCIDevice", |
| .version_id = 2, |
| .minimum_version_id = 1, |
| .fields = (const VMStateField[]) { |
| VMSTATE_INT32_POSITIVE_LE(version_id, PCIDevice), |
| VMSTATE_BUFFER_UNSAFE_INFO_TEST(config, PCIDevice, |
| migrate_is_not_pcie, |
| 0, vmstate_info_pci_config, |
| PCI_CONFIG_SPACE_SIZE), |
| VMSTATE_BUFFER_UNSAFE_INFO_TEST(config, PCIDevice, |
| migrate_is_pcie, |
| 0, vmstate_info_pci_config, |
| PCIE_CONFIG_SPACE_SIZE), |
| VMSTATE_BUFFER_UNSAFE_INFO(irq_state, PCIDevice, 2, |
| vmstate_info_pci_irq_state, |
| PCI_NUM_PINS * sizeof(int32_t)), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| |
| void pci_device_save(PCIDevice *s, QEMUFile *f) |
| { |
| /* Clear interrupt status bit: it is implicit |
| * in irq_state which we are saving. |
| * This makes us compatible with old devices |
| * which never set or clear this bit. */ |
| s->config[PCI_STATUS] &= ~PCI_STATUS_INTERRUPT; |
| vmstate_save_state(f, &vmstate_pci_device, s, NULL); |
| /* Restore the interrupt status bit. */ |
| pci_update_irq_status(s); |
| } |
| |
| int pci_device_load(PCIDevice *s, QEMUFile *f) |
| { |
| int ret; |
| ret = vmstate_load_state(f, &vmstate_pci_device, s, s->version_id); |
| /* Restore the interrupt status bit. */ |
| pci_update_irq_status(s); |
| return ret; |
| } |
| |
| static void pci_set_default_subsystem_id(PCIDevice *pci_dev) |
| { |
| pci_set_word(pci_dev->config + PCI_SUBSYSTEM_VENDOR_ID, |
| pci_default_sub_vendor_id); |
| pci_set_word(pci_dev->config + PCI_SUBSYSTEM_ID, |
| pci_default_sub_device_id); |
| } |
| |
| /* |
| * Parse [[<domain>:]<bus>:]<slot>, return -1 on error if funcp == NULL |
| * [[<domain>:]<bus>:]<slot>.<func>, return -1 on error |
| */ |
| static int pci_parse_devaddr(const char *addr, int *domp, int *busp, |
| unsigned int *slotp, unsigned int *funcp) |
| { |
| const char *p; |
| char *e; |
| unsigned long val; |
| unsigned long dom = 0, bus = 0; |
| unsigned int slot = 0; |
| unsigned int func = 0; |
| |
| p = addr; |
| val = strtoul(p, &e, 16); |
| if (e == p) |
| return -1; |
| if (*e == ':') { |
| bus = val; |
| p = e + 1; |
| val = strtoul(p, &e, 16); |
| if (e == p) |
| return -1; |
| if (*e == ':') { |
| dom = bus; |
| bus = val; |
| p = e + 1; |
| val = strtoul(p, &e, 16); |
| if (e == p) |
| return -1; |
| } |
| } |
| |
| slot = val; |
| |
| if (funcp != NULL) { |
| if (*e != '.') |
| return -1; |
| |
| p = e + 1; |
| val = strtoul(p, &e, 16); |
| if (e == p) |
| return -1; |
| |
| func = val; |
| } |
| |
| /* if funcp == NULL func is 0 */ |
| if (dom > 0xffff || bus > 0xff || slot > 0x1f || func > 7) |
| return -1; |
| |
| if (*e) |
| return -1; |
| |
| *domp = dom; |
| *busp = bus; |
| *slotp = slot; |
| if (funcp != NULL) |
| *funcp = func; |
| return 0; |
| } |
| |
| static void pci_init_cmask(PCIDevice *dev) |
| { |
| pci_set_word(dev->cmask + PCI_VENDOR_ID, 0xffff); |
| pci_set_word(dev->cmask + PCI_DEVICE_ID, 0xffff); |
| dev->cmask[PCI_STATUS] = PCI_STATUS_CAP_LIST; |
| dev->cmask[PCI_REVISION_ID] = 0xff; |
| dev->cmask[PCI_CLASS_PROG] = 0xff; |
| pci_set_word(dev->cmask + PCI_CLASS_DEVICE, 0xffff); |
| dev->cmask[PCI_HEADER_TYPE] = 0xff; |
| dev->cmask[PCI_CAPABILITY_LIST] = 0xff; |
| } |
| |
| static void pci_init_wmask(PCIDevice *dev) |
| { |
| int config_size = pci_config_size(dev); |
| |
| dev->wmask[PCI_CACHE_LINE_SIZE] = 0xff; |
| dev->wmask[PCI_INTERRUPT_LINE] = 0xff; |
| pci_set_word(dev->wmask + PCI_COMMAND, |
| PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | |
| PCI_COMMAND_INTX_DISABLE); |
| pci_word_test_and_set_mask(dev->wmask + PCI_COMMAND, PCI_COMMAND_SERR); |
| |
| memset(dev->wmask + PCI_CONFIG_HEADER_SIZE, 0xff, |
| config_size - PCI_CONFIG_HEADER_SIZE); |
| } |
| |
| static void pci_init_w1cmask(PCIDevice *dev) |
| { |
| /* |
| * Note: It's okay to set w1cmask even for readonly bits as |
| * long as their value is hardwired to 0. |
| */ |
| pci_set_word(dev->w1cmask + PCI_STATUS, |
| PCI_STATUS_PARITY | PCI_STATUS_SIG_TARGET_ABORT | |
| PCI_STATUS_REC_TARGET_ABORT | PCI_STATUS_REC_MASTER_ABORT | |
| PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_DETECTED_PARITY); |
| } |
| |
| static void pci_init_mask_bridge(PCIDevice *d) |
| { |
| /* PCI_PRIMARY_BUS, PCI_SECONDARY_BUS, PCI_SUBORDINATE_BUS and |
| PCI_SEC_LATENCY_TIMER */ |
| memset(d->wmask + PCI_PRIMARY_BUS, 0xff, 4); |
| |
| /* base and limit */ |
| d->wmask[PCI_IO_BASE] = PCI_IO_RANGE_MASK & 0xff; |
| d->wmask[PCI_IO_LIMIT] = PCI_IO_RANGE_MASK & 0xff; |
| pci_set_word(d->wmask + PCI_MEMORY_BASE, |
| PCI_MEMORY_RANGE_MASK & 0xffff); |
| pci_set_word(d->wmask + PCI_MEMORY_LIMIT, |
| PCI_MEMORY_RANGE_MASK & 0xffff); |
| pci_set_word(d->wmask + PCI_PREF_MEMORY_BASE, |
| PCI_PREF_RANGE_MASK & 0xffff); |
| pci_set_word(d->wmask + PCI_PREF_MEMORY_LIMIT, |
| PCI_PREF_RANGE_MASK & 0xffff); |
| |
| /* PCI_PREF_BASE_UPPER32 and PCI_PREF_LIMIT_UPPER32 */ |
| memset(d->wmask + PCI_PREF_BASE_UPPER32, 0xff, 8); |
| |
| /* Supported memory and i/o types */ |
| d->config[PCI_IO_BASE] |= PCI_IO_RANGE_TYPE_16; |
| d->config[PCI_IO_LIMIT] |= PCI_IO_RANGE_TYPE_16; |
| pci_word_test_and_set_mask(d->config + PCI_PREF_MEMORY_BASE, |
| PCI_PREF_RANGE_TYPE_64); |
| pci_word_test_and_set_mask(d->config + PCI_PREF_MEMORY_LIMIT, |
| PCI_PREF_RANGE_TYPE_64); |
| |
| /* |
| * TODO: Bridges default to 10-bit VGA decoding but we currently only |
| * implement 16-bit decoding (no alias support). |
| */ |
| pci_set_word(d->wmask + PCI_BRIDGE_CONTROL, |
| PCI_BRIDGE_CTL_PARITY | |
| PCI_BRIDGE_CTL_SERR | |
| PCI_BRIDGE_CTL_ISA | |
| PCI_BRIDGE_CTL_VGA | |
| PCI_BRIDGE_CTL_VGA_16BIT | |
| PCI_BRIDGE_CTL_MASTER_ABORT | |
| PCI_BRIDGE_CTL_BUS_RESET | |
| PCI_BRIDGE_CTL_FAST_BACK | |
| PCI_BRIDGE_CTL_DISCARD | |
| PCI_BRIDGE_CTL_SEC_DISCARD | |
| PCI_BRIDGE_CTL_DISCARD_SERR); |
| /* Below does not do anything as we never set this bit, put here for |
| * completeness. */ |
| pci_set_word(d->w1cmask + PCI_BRIDGE_CONTROL, |
| PCI_BRIDGE_CTL_DISCARD_STATUS); |
| d->cmask[PCI_IO_BASE] |= PCI_IO_RANGE_TYPE_MASK; |
| d->cmask[PCI_IO_LIMIT] |= PCI_IO_RANGE_TYPE_MASK; |
| pci_word_test_and_set_mask(d->cmask + PCI_PREF_MEMORY_BASE, |
| PCI_PREF_RANGE_TYPE_MASK); |
| pci_word_test_and_set_mask(d->cmask + PCI_PREF_MEMORY_LIMIT, |
| PCI_PREF_RANGE_TYPE_MASK); |
| } |
| |
| static void pci_init_multifunction(PCIBus *bus, PCIDevice *dev, Error **errp) |
| { |
| uint8_t slot = PCI_SLOT(dev->devfn); |
| uint8_t func; |
| |
| if (dev->cap_present & QEMU_PCI_CAP_MULTIFUNCTION) { |
| dev->config[PCI_HEADER_TYPE] |= PCI_HEADER_TYPE_MULTI_FUNCTION; |
| } |
| |
| /* |
| * With SR/IOV and ARI, a device at function 0 need not be a multifunction |
| * device, as it may just be a VF that ended up with function 0 in |
| * the legacy PCI interpretation. Avoid failing in such cases: |
| */ |
| if (pci_is_vf(dev) && |
| dev->exp.sriov_vf.pf->cap_present & QEMU_PCI_CAP_MULTIFUNCTION) { |
| return; |
| } |
| |
| /* |
| * multifunction bit is interpreted in two ways as follows. |
| * - all functions must set the bit to 1. |
| * Example: Intel X53 |
| * - function 0 must set the bit, but the rest function (> 0) |
| * is allowed to leave the bit to 0. |
| * Example: PIIX3(also in qemu), PIIX4(also in qemu), ICH10, |
| * |
| * So OS (at least Linux) checks the bit of only function 0, |
| * and doesn't see the bit of function > 0. |
| * |
| * The below check allows both interpretation. |
| */ |
| if (PCI_FUNC(dev->devfn)) { |
| PCIDevice *f0 = bus->devices[PCI_DEVFN(slot, 0)]; |
| if (f0 && !(f0->cap_present & QEMU_PCI_CAP_MULTIFUNCTION)) { |
| /* function 0 should set multifunction bit */ |
| error_setg(errp, "PCI: single function device can't be populated " |
| "in function %x.%x", slot, PCI_FUNC(dev->devfn)); |
| return; |
| } |
| return; |
| } |
| |
| if (dev->cap_present & QEMU_PCI_CAP_MULTIFUNCTION) { |
| return; |
| } |
| /* function 0 indicates single function, so function > 0 must be NULL */ |
| for (func = 1; func < PCI_FUNC_MAX; ++func) { |
| if (bus->devices[PCI_DEVFN(slot, func)]) { |
| error_setg(errp, "PCI: %x.0 indicates single function, " |
| "but %x.%x is already populated.", |
| slot, slot, func); |
| return; |
| } |
| } |
| } |
| |
| static void pci_config_alloc(PCIDevice *pci_dev) |
| { |
| int config_size = pci_config_size(pci_dev); |
| |
| pci_dev->config = g_malloc0(config_size); |
| pci_dev->cmask = g_malloc0(config_size); |
| pci_dev->wmask = g_malloc0(config_size); |
| pci_dev->w1cmask = g_malloc0(config_size); |
| pci_dev->used = g_malloc0(config_size); |
| } |
| |
| static void pci_config_free(PCIDevice *pci_dev) |
| { |
| g_free(pci_dev->config); |
| g_free(pci_dev->cmask); |
| g_free(pci_dev->wmask); |
| g_free(pci_dev->w1cmask); |
| g_free(pci_dev->used); |
| } |
| |
| static void do_pci_unregister_device(PCIDevice *pci_dev) |
| { |
| pci_get_bus(pci_dev)->devices[pci_dev->devfn] = NULL; |
| pci_config_free(pci_dev); |
| |
| if (xen_mode == XEN_EMULATE) { |
| xen_evtchn_remove_pci_device(pci_dev); |
| } |
| if (memory_region_is_mapped(&pci_dev->bus_master_enable_region)) { |
| memory_region_del_subregion(&pci_dev->bus_master_container_region, |
| &pci_dev->bus_master_enable_region); |
| } |
| address_space_destroy(&pci_dev->bus_master_as); |
| } |
| |
| /* Extract PCIReqIDCache into BDF format */ |
| static uint16_t pci_req_id_cache_extract(PCIReqIDCache *cache) |
| { |
| uint8_t bus_n; |
| uint16_t result; |
| |
| switch (cache->type) { |
| case PCI_REQ_ID_BDF: |
| result = pci_get_bdf(cache->dev); |
| break; |
| case PCI_REQ_ID_SECONDARY_BUS: |
| bus_n = pci_dev_bus_num(cache->dev); |
| result = PCI_BUILD_BDF(bus_n, 0); |
| break; |
| default: |
| error_report("Invalid PCI requester ID cache type: %d", |
| cache->type); |
| exit(1); |
| break; |
| } |
| |
| return result; |
| } |
| |
| /* Parse bridges up to the root complex and return requester ID |
| * cache for specific device. For full PCIe topology, the cache |
| * result would be exactly the same as getting BDF of the device. |
| * However, several tricks are required when system mixed up with |
| * legacy PCI devices and PCIe-to-PCI bridges. |
| * |
| * Here we cache the proxy device (and type) not requester ID since |
| * bus number might change from time to time. |
| */ |
| static PCIReqIDCache pci_req_id_cache_get(PCIDevice *dev) |
| { |
| PCIDevice *parent; |
| PCIReqIDCache cache = { |
| .dev = dev, |
| .type = PCI_REQ_ID_BDF, |
| }; |
| |
| while (!pci_bus_is_root(pci_get_bus(dev))) { |
| /* We are under PCI/PCIe bridges */ |
| parent = pci_get_bus(dev)->parent_dev; |
| if (pci_is_express(parent)) { |
| if (pcie_cap_get_type(parent) == PCI_EXP_TYPE_PCI_BRIDGE) { |
| /* When we pass through PCIe-to-PCI/PCIX bridges, we |
| * override the requester ID using secondary bus |
| * number of parent bridge with zeroed devfn |
| * (pcie-to-pci bridge spec chap 2.3). */ |
| cache.type = PCI_REQ_ID_SECONDARY_BUS; |
| cache.dev = dev; |
| } |
| } else { |
| /* Legacy PCI, override requester ID with the bridge's |
| * BDF upstream. When the root complex connects to |
| * legacy PCI devices (including buses), it can only |
| * obtain requester ID info from directly attached |
| * devices. If devices are attached under bridges, only |
| * the requester ID of the bridge that is directly |
| * attached to the root complex can be recognized. */ |
| cache.type = PCI_REQ_ID_BDF; |
| cache.dev = parent; |
| } |
| dev = parent; |
| } |
| |
| return cache; |
| } |
| |
| uint16_t pci_requester_id(PCIDevice *dev) |
| { |
| return pci_req_id_cache_extract(&dev->requester_id_cache); |
| } |
| |
| static bool pci_bus_devfn_available(PCIBus *bus, int devfn) |
| { |
| return !(bus->devices[devfn]); |
| } |
| |
| static bool pci_bus_devfn_reserved(PCIBus *bus, int devfn) |
| { |
| return bus->slot_reserved_mask & (1UL << PCI_SLOT(devfn)); |
| } |
| |
| uint32_t pci_bus_get_slot_reserved_mask(PCIBus *bus) |
| { |
| return bus->slot_reserved_mask; |
| } |
| |
| void pci_bus_set_slot_reserved_mask(PCIBus *bus, uint32_t mask) |
| { |
| bus->slot_reserved_mask |= mask; |
| } |
| |
| void pci_bus_clear_slot_reserved_mask(PCIBus *bus, uint32_t mask) |
| { |
| bus->slot_reserved_mask &= ~mask; |
| } |
| |
| /* -1 for devfn means auto assign */ |
| static PCIDevice *do_pci_register_device(PCIDevice *pci_dev, |
| const char *name, int devfn, |
| Error **errp) |
| { |
| PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(pci_dev); |
| PCIConfigReadFunc *config_read = pc->config_read; |
| PCIConfigWriteFunc *config_write = pc->config_write; |
| Error *local_err = NULL; |
| DeviceState *dev = DEVICE(pci_dev); |
| PCIBus *bus = pci_get_bus(pci_dev); |
| bool is_bridge = IS_PCI_BRIDGE(pci_dev); |
| |
| /* Only pci bridges can be attached to extra PCI root buses */ |
| if (pci_bus_is_root(bus) && bus->parent_dev && !is_bridge) { |
| error_setg(errp, |
| "PCI: Only PCI/PCIe bridges can be plugged into %s", |
| bus->parent_dev->name); |
| return NULL; |
| } |
| |
| if (devfn < 0) { |
| for(devfn = bus->devfn_min ; devfn < ARRAY_SIZE(bus->devices); |
| devfn += PCI_FUNC_MAX) { |
| if (pci_bus_devfn_available(bus, devfn) && |
| !pci_bus_devfn_reserved(bus, devfn)) { |
| goto found; |
| } |
| } |
| error_setg(errp, "PCI: no slot/function available for %s, all in use " |
| "or reserved", name); |
| return NULL; |
| found: ; |
| } else if (pci_bus_devfn_reserved(bus, devfn)) { |
| error_setg(errp, "PCI: slot %d function %d not available for %s," |
| " reserved", |
| PCI_SLOT(devfn), PCI_FUNC(devfn), name); |
| return NULL; |
| } else if (!pci_bus_devfn_available(bus, devfn)) { |
| error_setg(errp, "PCI: slot %d function %d not available for %s," |
| " in use by %s,id=%s", |
| PCI_SLOT(devfn), PCI_FUNC(devfn), name, |
| bus->devices[devfn]->name, bus->devices[devfn]->qdev.id); |
| return NULL; |
| } /* |
| * Populating function 0 triggers a scan from the guest that |
| * exposes other non-zero functions. Hence we need to ensure that |
| * function 0 wasn't added yet. |
| */ |
| else if (dev->hotplugged && |
| !pci_is_vf(pci_dev) && |
| pci_get_function_0(pci_dev)) { |
| error_setg(errp, "PCI: slot %d function 0 already occupied by %s," |
| " new func %s cannot be exposed to guest.", |
| PCI_SLOT(pci_get_function_0(pci_dev)->devfn), |
| pci_get_function_0(pci_dev)->name, |
| name); |
| |
| return NULL; |
| } |
| |
| pci_dev->devfn = devfn; |
| pci_dev->requester_id_cache = pci_req_id_cache_get(pci_dev); |
| pstrcpy(pci_dev->name, sizeof(pci_dev->name), name); |
| |
| memory_region_init(&pci_dev->bus_master_container_region, OBJECT(pci_dev), |
| "bus master container", UINT64_MAX); |
| address_space_init(&pci_dev->bus_master_as, |
| &pci_dev->bus_master_container_region, pci_dev->name); |
| |
| if (phase_check(PHASE_MACHINE_READY)) { |
| pci_init_bus_master(pci_dev); |
| } |
| pci_dev->irq_state = 0; |
| pci_config_alloc(pci_dev); |
| |
| pci_config_set_vendor_id(pci_dev->config, pc->vendor_id); |
| pci_config_set_device_id(pci_dev->config, pc->device_id); |
| pci_config_set_revision(pci_dev->config, pc->revision); |
| pci_config_set_class(pci_dev->config, pc->class_id); |
| |
| if (!is_bridge) { |
| if (pc->subsystem_vendor_id || pc->subsystem_id) { |
| pci_set_word(pci_dev->config + PCI_SUBSYSTEM_VENDOR_ID, |
| pc->subsystem_vendor_id); |
| pci_set_word(pci_dev->config + PCI_SUBSYSTEM_ID, |
| pc->subsystem_id); |
| } else { |
| pci_set_default_subsystem_id(pci_dev); |
| } |
| } else { |
| /* subsystem_vendor_id/subsystem_id are only for header type 0 */ |
| assert(!pc->subsystem_vendor_id); |
| assert(!pc->subsystem_id); |
| } |
| pci_init_cmask(pci_dev); |
| pci_init_wmask(pci_dev); |
| pci_init_w1cmask(pci_dev); |
| if (is_bridge) { |
| pci_init_mask_bridge(pci_dev); |
| } |
| pci_init_multifunction(bus, pci_dev, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| do_pci_unregister_device(pci_dev); |
| return NULL; |
| } |
| |
| if (!config_read) |
| config_read = pci_default_read_config; |
| if (!config_write) |
| config_write = pci_default_write_config; |
| pci_dev->config_read = config_read; |
| pci_dev->config_write = config_write; |
| bus->devices[devfn] = pci_dev; |
| pci_dev->version_id = 2; /* Current pci device vmstate version */ |
| return pci_dev; |
| } |
| |
| static void pci_unregister_io_regions(PCIDevice *pci_dev) |
| { |
| PCIIORegion *r; |
| int i; |
| |
| for(i = 0; i < PCI_NUM_REGIONS; i++) { |
| r = &pci_dev->io_regions[i]; |
| if (!r->size || r->addr == PCI_BAR_UNMAPPED) |
| continue; |
| memory_region_del_subregion(r->address_space, r->memory); |
| } |
| |
| pci_unregister_vga(pci_dev); |
| } |
| |
| static void pci_qdev_unrealize(DeviceState *dev) |
| { |
| PCIDevice *pci_dev = PCI_DEVICE(dev); |
| PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(pci_dev); |
| |
| pci_unregister_io_regions(pci_dev); |
| pci_del_option_rom(pci_dev); |
| |
| if (pc->exit) { |
| pc->exit(pci_dev); |
| } |
| |
| pci_device_deassert_intx(pci_dev); |
| do_pci_unregister_device(pci_dev); |
| |
| pci_dev->msi_trigger = NULL; |
| |
| /* |
| * clean up acpi-index so it could reused by another device |
| */ |
| if (pci_dev->acpi_index) { |
| GSequence *used_indexes = pci_acpi_index_list(); |
| |
| g_sequence_remove(g_sequence_lookup(used_indexes, |
| GINT_TO_POINTER(pci_dev->acpi_index), |
| g_cmp_uint32, NULL)); |
| } |
| } |
| |
| void pci_register_bar(PCIDevice *pci_dev, int region_num, |
| uint8_t type, MemoryRegion *memory) |
| { |
| PCIIORegion *r; |
| uint32_t addr; /* offset in pci config space */ |
| uint64_t wmask; |
| pcibus_t size = memory_region_size(memory); |
| uint8_t hdr_type; |
| |
| assert(!pci_is_vf(pci_dev)); /* VFs must use pcie_sriov_vf_register_bar */ |
| assert(region_num >= 0); |
| assert(region_num < PCI_NUM_REGIONS); |
| assert(is_power_of_2(size)); |
| |
| /* A PCI bridge device (with Type 1 header) may only have at most 2 BARs */ |
| hdr_type = |
| pci_dev->config[PCI_HEADER_TYPE] & ~PCI_HEADER_TYPE_MULTI_FUNCTION; |
| assert(hdr_type != PCI_HEADER_TYPE_BRIDGE || region_num < 2); |
| |
| r = &pci_dev->io_regions[region_num]; |
| r->addr = PCI_BAR_UNMAPPED; |
| r->size = size; |
| r->type = type; |
| r->memory = memory; |
| r->address_space = type & PCI_BASE_ADDRESS_SPACE_IO |
| ? pci_get_bus(pci_dev)->address_space_io |
| : pci_get_bus(pci_dev)->address_space_mem; |
| |
| wmask = ~(size - 1); |
| if (region_num == PCI_ROM_SLOT) { |
| /* ROM enable bit is writable */ |
| wmask |= PCI_ROM_ADDRESS_ENABLE; |
| } |
| |
| addr = pci_bar(pci_dev, region_num); |
| pci_set_long(pci_dev->config + addr, type); |
| |
| if (!(r->type & PCI_BASE_ADDRESS_SPACE_IO) && |
| r->type & PCI_BASE_ADDRESS_MEM_TYPE_64) { |
| pci_set_quad(pci_dev->wmask + addr, wmask); |
| pci_set_quad(pci_dev->cmask + addr, ~0ULL); |
| } else { |
| pci_set_long(pci_dev->wmask + addr, wmask & 0xffffffff); |
| pci_set_long(pci_dev->cmask + addr, 0xffffffff); |
| } |
| } |
| |
| static void pci_update_vga(PCIDevice *pci_dev) |
| { |
| uint16_t cmd; |
| |
| if (!pci_dev->has_vga) { |
| return; |
| } |
| |
| cmd = pci_get_word(pci_dev->config + PCI_COMMAND); |
| |
| memory_region_set_enabled(pci_dev->vga_regions[QEMU_PCI_VGA_MEM], |
| cmd & PCI_COMMAND_MEMORY); |
| memory_region_set_enabled(pci_dev->vga_regions[QEMU_PCI_VGA_IO_LO], |
| cmd & PCI_COMMAND_IO); |
| memory_region_set_enabled(pci_dev->vga_regions[QEMU_PCI_VGA_IO_HI], |
| cmd & PCI_COMMAND_IO); |
| } |
| |
| void pci_register_vga(PCIDevice *pci_dev, MemoryRegion *mem, |
| MemoryRegion *io_lo, MemoryRegion *io_hi) |
| { |
| PCIBus *bus = pci_get_bus(pci_dev); |
| |
| assert(!pci_dev->has_vga); |
| |
| assert(memory_region_size(mem) == QEMU_PCI_VGA_MEM_SIZE); |
| pci_dev->vga_regions[QEMU_PCI_VGA_MEM] = mem; |
| memory_region_add_subregion_overlap(bus->address_space_mem, |
| QEMU_PCI_VGA_MEM_BASE, mem, 1); |
| |
| assert(memory_region_size(io_lo) == QEMU_PCI_VGA_IO_LO_SIZE); |
| pci_dev->vga_regions[QEMU_PCI_VGA_IO_LO] = io_lo; |
| memory_region_add_subregion_overlap(bus->address_space_io, |
| QEMU_PCI_VGA_IO_LO_BASE, io_lo, 1); |
| |
| assert(memory_region_size(io_hi) == QEMU_PCI_VGA_IO_HI_SIZE); |
| pci_dev->vga_regions[QEMU_PCI_VGA_IO_HI] = io_hi; |
| memory_region_add_subregion_overlap(bus->address_space_io, |
| QEMU_PCI_VGA_IO_HI_BASE, io_hi, 1); |
| pci_dev->has_vga = true; |
| |
| pci_update_vga(pci_dev); |
| } |
| |
| void pci_unregister_vga(PCIDevice *pci_dev) |
| { |
| PCIBus *bus = pci_get_bus(pci_dev); |
| |
| if (!pci_dev->has_vga) { |
| return; |
| } |
| |
| memory_region_del_subregion(bus->address_space_mem, |
| pci_dev->vga_regions[QEMU_PCI_VGA_MEM]); |
| memory_region_del_subregion(bus->address_space_io, |
| pci_dev->vga_regions[QEMU_PCI_VGA_IO_LO]); |
| memory_region_del_subregion(bus->address_space_io, |
| pci_dev->vga_regions[QEMU_PCI_VGA_IO_HI]); |
| pci_dev->has_vga = false; |
| } |
| |
| pcibus_t pci_get_bar_addr(PCIDevice *pci_dev, int region_num) |
| { |
| return pci_dev->io_regions[region_num].addr; |
| } |
| |
| static pcibus_t pci_config_get_bar_addr(PCIDevice *d, int reg, |
| uint8_t type, pcibus_t size) |
| { |
| pcibus_t new_addr; |
| if (!pci_is_vf(d)) { |
| int bar = pci_bar(d, reg); |
| if (type & PCI_BASE_ADDRESS_MEM_TYPE_64) { |
| new_addr = pci_get_quad(d->config + bar); |
| } else { |
| new_addr = pci_get_long(d->config + bar); |
| } |
| } else { |
| PCIDevice *pf = d->exp.sriov_vf.pf; |
| uint16_t sriov_cap = pf->exp.sriov_cap; |
| int bar = sriov_cap + PCI_SRIOV_BAR + reg * 4; |
| uint16_t vf_offset = |
| pci_get_word(pf->config + sriov_cap + PCI_SRIOV_VF_OFFSET); |
| uint16_t vf_stride = |
| pci_get_word(pf->config + sriov_cap + PCI_SRIOV_VF_STRIDE); |
| uint32_t vf_num = (d->devfn - (pf->devfn + vf_offset)) / vf_stride; |
| |
| if (type & PCI_BASE_ADDRESS_MEM_TYPE_64) { |
| new_addr = pci_get_quad(pf->config + bar); |
| } else { |
| new_addr = pci_get_long(pf->config + bar); |
| } |
| new_addr += vf_num * size; |
| } |
| /* The ROM slot has a specific enable bit, keep it intact */ |
| if (reg != PCI_ROM_SLOT) { |
| new_addr &= ~(size - 1); |
| } |
| return new_addr; |
| } |
| |
| pcibus_t pci_bar_address(PCIDevice *d, |
| int reg, uint8_t type, pcibus_t size) |
| { |
| pcibus_t new_addr, last_addr; |
| uint16_t cmd = pci_get_word(d->config + PCI_COMMAND); |
| MachineClass *mc = MACHINE_GET_CLASS(qdev_get_machine()); |
| bool allow_0_address = mc->pci_allow_0_address; |
| |
| if (type & PCI_BASE_ADDRESS_SPACE_IO) { |
| if (!(cmd & PCI_COMMAND_IO)) { |
| return PCI_BAR_UNMAPPED; |
| } |
| new_addr = pci_config_get_bar_addr(d, reg, type, size); |
| last_addr = new_addr + size - 1; |
| /* Check if 32 bit BAR wraps around explicitly. |
| * TODO: make priorities correct and remove this work around. |
| */ |
| if (last_addr <= new_addr || last_addr >= UINT32_MAX || |
| (!allow_0_address && new_addr == 0)) { |
| return PCI_BAR_UNMAPPED; |
| } |
| return new_addr; |
| } |
| |
| if (!(cmd & PCI_COMMAND_MEMORY)) { |
| return PCI_BAR_UNMAPPED; |
| } |
| new_addr = pci_config_get_bar_addr(d, reg, type, size); |
| /* the ROM slot has a specific enable bit */ |
| if (reg == PCI_ROM_SLOT && !(new_addr & PCI_ROM_ADDRESS_ENABLE)) { |
| return PCI_BAR_UNMAPPED; |
| } |
| new_addr &= ~(size - 1); |
| last_addr = new_addr + size - 1; |
| /* NOTE: we do not support wrapping */ |
| /* XXX: as we cannot support really dynamic |
| mappings, we handle specific values as invalid |
| mappings. */ |
| if (last_addr <= new_addr || last_addr == PCI_BAR_UNMAPPED || |
| (!allow_0_address && new_addr == 0)) { |
| return PCI_BAR_UNMAPPED; |
| } |
| |
| /* Now pcibus_t is 64bit. |
| * Check if 32 bit BAR wraps around explicitly. |
| * Without this, PC ide doesn't work well. |
| * TODO: remove this work around. |
| */ |
| if (!(type & PCI_BASE_ADDRESS_MEM_TYPE_64) && last_addr >= UINT32_MAX) { |
| return PCI_BAR_UNMAPPED; |
| } |
| |
| /* |
| * OS is allowed to set BAR beyond its addressable |
| * bits. For example, 32 bit OS can set 64bit bar |
| * to >4G. Check it. TODO: we might need to support |
| * it in the future for e.g. PAE. |
| */ |
| if (last_addr >= HWADDR_MAX) { |
| return PCI_BAR_UNMAPPED; |
| } |
| |
| return new_addr; |
| } |
| |
| static void pci_update_mappings(PCIDevice *d) |
| { |
| PCIIORegion *r; |
| int i; |
| pcibus_t new_addr; |
| |
| for(i = 0; i < PCI_NUM_REGIONS; i++) { |
| r = &d->io_regions[i]; |
| |
| /* this region isn't registered */ |
| if (!r->size) |
| continue; |
| |
| new_addr = pci_bar_address(d, i, r->type, r->size); |
| if (!d->has_power) { |
| new_addr = PCI_BAR_UNMAPPED; |
| } |
| |
| /* This bar isn't changed */ |
| if (new_addr == r->addr) |
| continue; |
| |
| /* now do the real mapping */ |
| if (r->addr != PCI_BAR_UNMAPPED) { |
| trace_pci_update_mappings_del(d->name, pci_dev_bus_num(d), |
| PCI_SLOT(d->devfn), |
| PCI_FUNC(d->devfn), |
| i, r->addr, r->size); |
| memory_region_del_subregion(r->address_space, r->memory); |
| } |
| r->addr = new_addr; |
| if (r->addr != PCI_BAR_UNMAPPED) { |
| trace_pci_update_mappings_add(d->name, pci_dev_bus_num(d), |
| PCI_SLOT(d->devfn), |
| PCI_FUNC(d->devfn), |
| i, r->addr, r->size); |
| memory_region_add_subregion_overlap(r->address_space, |
| r->addr, r->memory, 1); |
| } |
| } |
| |
| pci_update_vga(d); |
| } |
| |
| static inline int pci_irq_disabled(PCIDevice *d) |
| { |
| return pci_get_word(d->config + PCI_COMMAND) & PCI_COMMAND_INTX_DISABLE; |
| } |
| |
| /* Called after interrupt disabled field update in config space, |
| * assert/deassert interrupts if necessary. |
| * Gets original interrupt disable bit value (before update). */ |
| static void pci_update_irq_disabled(PCIDevice *d, int was_irq_disabled) |
| { |
| int i, disabled = pci_irq_disabled(d); |
| if (disabled == was_irq_disabled) |
| return; |
| for (i = 0; i < PCI_NUM_PINS; ++i) { |
| int state = pci_irq_state(d, i); |
| pci_change_irq_level(d, i, disabled ? -state : state); |
| } |
| } |
| |
| uint32_t pci_default_read_config(PCIDevice *d, |
| uint32_t address, int len) |
| { |
| uint32_t val = 0; |
| |
| assert(address + len <= pci_config_size(d)); |
| |
| if (pci_is_express_downstream_port(d) && |
| ranges_overlap(address, len, d->exp.exp_cap + PCI_EXP_LNKSTA, 2)) { |
| pcie_sync_bridge_lnk(d); |
| } |
| memcpy(&val, d->config + address, len); |
| return le32_to_cpu(val); |
| } |
| |
| void pci_default_write_config(PCIDevice *d, uint32_t addr, uint32_t val_in, int l) |
| { |
| int i, was_irq_disabled = pci_irq_disabled(d); |
| uint32_t val = val_in; |
| |
| assert(addr + l <= pci_config_size(d)); |
| |
| for (i = 0; i < l; val >>= 8, ++i) { |
| uint8_t wmask = d->wmask[addr + i]; |
| uint8_t w1cmask = d->w1cmask[addr + i]; |
| assert(!(wmask & w1cmask)); |
| d->config[addr + i] = (d->config[addr + i] & ~wmask) | (val & wmask); |
| d->config[addr + i] &= ~(val & w1cmask); /* W1C: Write 1 to Clear */ |
| } |
| if (ranges_overlap(addr, l, PCI_BASE_ADDRESS_0, 24) || |
| ranges_overlap(addr, l, PCI_ROM_ADDRESS, 4) || |
| ranges_overlap(addr, l, PCI_ROM_ADDRESS1, 4) || |
| range_covers_byte(addr, l, PCI_COMMAND)) |
| pci_update_mappings(d); |
| |
| if (ranges_overlap(addr, l, PCI_COMMAND, 2)) { |
| pci_update_irq_disabled(d, was_irq_disabled); |
| memory_region_set_enabled(&d->bus_master_enable_region, |
| (pci_get_word(d->config + PCI_COMMAND) |
| & PCI_COMMAND_MASTER) && d->has_power); |
| } |
| |
| msi_write_config(d, addr, val_in, l); |
| msix_write_config(d, addr, val_in, l); |
| pcie_sriov_config_write(d, addr, val_in, l); |
| } |
| |
| /***********************************************************/ |
| /* generic PCI irq support */ |
| |
| /* 0 <= irq_num <= 3. level must be 0 or 1 */ |
| static void pci_irq_handler(void *opaque, int irq_num, int level) |
| { |
| PCIDevice *pci_dev = opaque; |
| int change; |
| |
| assert(0 <= irq_num && irq_num < PCI_NUM_PINS); |
| assert(level == 0 || level == 1); |
| change = level - pci_irq_state(pci_dev, irq_num); |
| if (!change) |
| return; |
| |
| pci_set_irq_state(pci_dev, irq_num, level); |
| pci_update_irq_status(pci_dev); |
| if (pci_irq_disabled(pci_dev)) |
| return; |
| pci_change_irq_level(pci_dev, irq_num, change); |
| } |
| |
| qemu_irq pci_allocate_irq(PCIDevice *pci_dev) |
| { |
| int intx = pci_intx(pci_dev); |
| assert(0 <= intx && intx < PCI_NUM_PINS); |
| |
| return qemu_allocate_irq(pci_irq_handler, pci_dev, intx); |
| } |
| |
| void pci_set_irq(PCIDevice *pci_dev, int level) |
| { |
| int intx = pci_intx(pci_dev); |
| pci_irq_handler(pci_dev, intx, level); |
| } |
| |
| /* Special hooks used by device assignment */ |
| void pci_bus_set_route_irq_fn(PCIBus *bus, pci_route_irq_fn route_intx_to_irq) |
| { |
| assert(pci_bus_is_root(bus)); |
| bus->route_intx_to_irq = route_intx_to_irq; |
| } |
| |
| PCIINTxRoute pci_device_route_intx_to_irq(PCIDevice *dev, int pin) |
| { |
| PCIBus *bus; |
| |
| do { |
| int dev_irq = pin; |
| bus = pci_get_bus(dev); |
| pin = bus->map_irq(dev, pin); |
| trace_pci_route_irq(dev_irq, DEVICE(dev)->canonical_path, pin, |
| pci_bus_is_root(bus) ? "root-complex" |
| : DEVICE(bus->parent_dev)->canonical_path); |
| dev = bus->parent_dev; |
| } while (dev); |
| |
| if (!bus->route_intx_to_irq) { |
| error_report("PCI: Bug - unimplemented PCI INTx routing (%s)", |
| object_get_typename(OBJECT(bus->qbus.parent))); |
| return (PCIINTxRoute) { PCI_INTX_DISABLED, -1 }; |
| } |
| |
| return bus->route_intx_to_irq(bus->irq_opaque, pin); |
| } |
| |
| bool pci_intx_route_changed(PCIINTxRoute *old, PCIINTxRoute *new) |
| { |
| return old->mode != new->mode || old->irq != new->irq; |
| } |
| |
| void pci_bus_fire_intx_routing_notifier(PCIBus *bus) |
| { |
| PCIDevice *dev; |
| PCIBus *sec; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(bus->devices); ++i) { |
| dev = bus->devices[i]; |
| if (dev && dev->intx_routing_notifier) { |
| dev->intx_routing_notifier(dev); |
| } |
| } |
| |
| QLIST_FOREACH(sec, &bus->child, sibling) { |
| pci_bus_fire_intx_routing_notifier(sec); |
| } |
| } |
| |
| void pci_device_set_intx_routing_notifier(PCIDevice *dev, |
| PCIINTxRoutingNotifier notifier) |
| { |
| dev->intx_routing_notifier = notifier; |
| } |
| |
| /* |
| * PCI-to-PCI bridge specification |
| * 9.1: Interrupt routing. Table 9-1 |
| * |
| * the PCI Express Base Specification, Revision 2.1 |
| * 2.2.8.1: INTx interrupt signaling - Rules |
| * the Implementation Note |
| * Table 2-20 |
| */ |
| /* |
| * 0 <= pin <= 3 0 = INTA, 1 = INTB, 2 = INTC, 3 = INTD |
| * 0-origin unlike PCI interrupt pin register. |
| */ |
| int pci_swizzle_map_irq_fn(PCIDevice *pci_dev, int pin) |
| { |
| return pci_swizzle(PCI_SLOT(pci_dev->devfn), pin); |
| } |
| |
| /***********************************************************/ |
| /* monitor info on PCI */ |
| |
| static const pci_class_desc pci_class_descriptions[] = |
| { |
| { 0x0001, "VGA controller", "display"}, |
| { 0x0100, "SCSI controller", "scsi"}, |
| { 0x0101, "IDE controller", "ide"}, |
| { 0x0102, "Floppy controller", "fdc"}, |
| { 0x0103, "IPI controller", "ipi"}, |
| { 0x0104, "RAID controller", "raid"}, |
| { 0x0106, "SATA controller"}, |
| { 0x0107, "SAS controller"}, |
| { 0x0180, "Storage controller"}, |
| { 0x0200, "Ethernet controller", "ethernet"}, |
| { 0x0201, "Token Ring controller", "token-ring"}, |
| { 0x0202, "FDDI controller", "fddi"}, |
| { 0x0203, "ATM controller", "atm"}, |
| { 0x0280, "Network controller"}, |
| { 0x0300, "VGA controller", "display", 0x00ff}, |
| { 0x0301, "XGA controller"}, |
| { 0x0302, "3D controller"}, |
| { 0x0380, "Display controller"}, |
| { 0x0400, "Video controller", "video"}, |
| { 0x0401, "Audio controller", "sound"}, |
| { 0x0402, "Phone"}, |
| { 0x0403, "Audio controller", "sound"}, |
| { 0x0480, "Multimedia controller"}, |
| { 0x0500, "RAM controller", "memory"}, |
| { 0x0501, "Flash controller", "flash"}, |
| { 0x0580, "Memory controller"}, |
| { 0x0600, "Host bridge", "host"}, |
| { 0x0601, "ISA bridge", "isa"}, |
| { 0x0602, "EISA bridge", "eisa"}, |
| { 0x0603, "MC bridge", "mca"}, |
| { 0x0604, "PCI bridge", "pci-bridge"}, |
| { 0x0605, "PCMCIA bridge", "pcmcia"}, |
| { 0x0606, "NUBUS bridge", "nubus"}, |
| { 0x0607, "CARDBUS bridge", "cardbus"}, |
| { 0x0608, "RACEWAY bridge"}, |
| { 0x0680, "Bridge"}, |
| { 0x0700, "Serial port", "serial"}, |
| { 0x0701, "Parallel port", "parallel"}, |
| { 0x0800, "Interrupt controller", "interrupt-controller"}, |
| { 0x0801, "DMA controller", "dma-controller"}, |
| { 0x0802, "Timer", "timer"}, |
| { 0x0803, "RTC", "rtc"}, |
| { 0x0900, "Keyboard", "keyboard"}, |
| { 0x0901, "Pen", "pen"}, |
| { 0x0902, "Mouse", "mouse"}, |
| { 0x0A00, "Dock station", "dock", 0x00ff}, |
| { 0x0B00, "i386 cpu", "cpu", 0x00ff}, |
| { 0x0c00, "Firewire controller", "firewire"}, |
| { 0x0c01, "Access bus controller", "access-bus"}, |
| { 0x0c02, "SSA controller", "ssa"}, |
| { 0x0c03, "USB controller", "usb"}, |
| { 0x0c04, "Fibre channel controller", "fibre-channel"}, |
| { 0x0c05, "SMBus"}, |
| { 0, NULL} |
| }; |
| |
| void pci_for_each_device_under_bus_reverse(PCIBus *bus, |
| pci_bus_dev_fn fn, |
| void *opaque) |
| { |
| PCIDevice *d; |
| int devfn; |
| |
| for (devfn = 0; devfn < ARRAY_SIZE(bus->devices); devfn++) { |
| d = bus->devices[ARRAY_SIZE(bus->devices) - 1 - devfn]; |
| if (d) { |
| fn(bus, d, opaque); |
| } |
| } |
| } |
| |
| void pci_for_each_device_reverse(PCIBus *bus, int bus_num, |
| pci_bus_dev_fn fn, void *opaque) |
| { |
| bus = pci_find_bus_nr(bus, bus_num); |
| |
| if (bus) { |
| pci_for_each_device_under_bus_reverse(bus, fn, opaque); |
| } |
| } |
| |
| void pci_for_each_device_under_bus(PCIBus *bus, |
| pci_bus_dev_fn fn, void *opaque) |
| { |
| PCIDevice *d; |
| int devfn; |
| |
| for(devfn = 0; devfn < ARRAY_SIZE(bus->devices); devfn++) { |
| d = bus->devices[devfn]; |
| if (d) { |
| fn(bus, d, opaque); |
| } |
| } |
| } |
| |
| void pci_for_each_device(PCIBus *bus, int bus_num, |
| pci_bus_dev_fn fn, void *opaque) |
| { |
| bus = pci_find_bus_nr(bus, bus_num); |
| |
| if (bus) { |
| pci_for_each_device_under_bus(bus, fn, opaque); |
| } |
| } |
| |
| const pci_class_desc *get_class_desc(int class) |
| { |
| const pci_class_desc *desc; |
| |
| desc = pci_class_descriptions; |
| while (desc->desc && class != desc->class) { |
| desc++; |
| } |
| |
| return desc; |
| } |
| |
| void pci_init_nic_devices(PCIBus *bus, const char *default_model) |
| { |
| qemu_create_nic_bus_devices(&bus->qbus, TYPE_PCI_DEVICE, default_model, |
| "virtio", "virtio-net-pci"); |
| } |
| |
| bool pci_init_nic_in_slot(PCIBus *rootbus, const char *model, |
| const char *alias, const char *devaddr) |
| { |
| NICInfo *nd = qemu_find_nic_info(model, true, alias); |
| int dom, busnr, devfn; |
| PCIDevice *pci_dev; |
| unsigned slot; |
| PCIBus *bus; |
| |
| if (!nd) { |
| return false; |
| } |
| |
| if (!devaddr || pci_parse_devaddr(devaddr, &dom, &busnr, &slot, NULL) < 0) { |
| error_report("Invalid PCI device address %s for device %s", |
| devaddr, model); |
| exit(1); |
| } |
| |
| if (dom != 0) { |
| error_report("No support for non-zero PCI domains"); |
| exit(1); |
| } |
| |
| devfn = PCI_DEVFN(slot, 0); |
| |
| bus = pci_find_bus_nr(rootbus, busnr); |
| if (!bus) { |
| error_report("Invalid PCI device address %s for device %s", |
| devaddr, model); |
| exit(1); |
| } |
| |
| pci_dev = pci_new(devfn, model); |
| qdev_set_nic_properties(&pci_dev->qdev, nd); |
| pci_realize_and_unref(pci_dev, bus, &error_fatal); |
| return true; |
| } |
| |
| PCIDevice *pci_vga_init(PCIBus *bus) |
| { |
| vga_interface_created = true; |
| switch (vga_interface_type) { |
| case VGA_CIRRUS: |
| return pci_create_simple(bus, -1, "cirrus-vga"); |
| case VGA_QXL: |
| return pci_create_simple(bus, -1, "qxl-vga"); |
| case VGA_STD: |
| return pci_create_simple(bus, -1, "VGA"); |
| case VGA_VMWARE: |
| return pci_create_simple(bus, -1, "vmware-svga"); |
| case VGA_VIRTIO: |
| return pci_create_simple(bus, -1, "virtio-vga"); |
| case VGA_NONE: |
| default: /* Other non-PCI types. Checking for unsupported types is already |
| done in vl.c. */ |
| return NULL; |
| } |
| } |
| |
| /* Whether a given bus number is in range of the secondary |
| * bus of the given bridge device. */ |
| static bool pci_secondary_bus_in_range(PCIDevice *dev, int bus_num) |
| { |
| return !(pci_get_word(dev->config + PCI_BRIDGE_CONTROL) & |
| PCI_BRIDGE_CTL_BUS_RESET) /* Don't walk the bus if it's reset. */ && |
| dev->config[PCI_SECONDARY_BUS] <= bus_num && |
| bus_num <= dev->config[PCI_SUBORDINATE_BUS]; |
| } |
| |
| /* Whether a given bus number is in a range of a root bus */ |
| static bool pci_root_bus_in_range(PCIBus *bus, int bus_num) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(bus->devices); ++i) { |
| PCIDevice *dev = bus->devices[i]; |
| |
| if (dev && IS_PCI_BRIDGE(dev)) { |
| if (pci_secondary_bus_in_range(dev, bus_num)) { |
| return true; |
| } |
| } |
| } |
| |
| return false; |
| } |
| |
| PCIBus *pci_find_bus_nr(PCIBus *bus, int bus_num) |
| { |
| PCIBus *sec; |
| |
| if (!bus) { |
| return NULL; |
| } |
| |
| if (pci_bus_num(bus) == bus_num) { |
| return bus; |
| } |
| |
| /* Consider all bus numbers in range for the host pci bridge. */ |
| if (!pci_bus_is_root(bus) && |
| !pci_secondary_bus_in_range(bus->parent_dev, bus_num)) { |
| return NULL; |
| } |
| |
| /* try child bus */ |
| for (; bus; bus = sec) { |
| QLIST_FOREACH(sec, &bus->child, sibling) { |
| if (pci_bus_num(sec) == bus_num) { |
| return sec; |
| } |
| /* PXB buses assumed to be children of bus 0 */ |
| if (pci_bus_is_root(sec)) { |
| if (pci_root_bus_in_range(sec, bus_num)) { |
| break; |
| } |
| } else { |
| if (pci_secondary_bus_in_range(sec->parent_dev, bus_num)) { |
| break; |
| } |
| } |
| } |
| } |
| |
| return NULL; |
| } |
| |
| void pci_for_each_bus_depth_first(PCIBus *bus, pci_bus_ret_fn begin, |
| pci_bus_fn end, void *parent_state) |
| { |
| PCIBus *sec; |
| void *state; |
| |
| if (!bus) { |
| return; |
| } |
| |
| if (begin) { |
| state = begin(bus, parent_state); |
| } else { |
| state = parent_state; |
| } |
| |
| QLIST_FOREACH(sec, &bus->child, sibling) { |
| pci_for_each_bus_depth_first(sec, begin, end, state); |
| } |
| |
| if (end) { |
| end(bus, state); |
| } |
| } |
| |
| |
| PCIDevice *pci_find_device(PCIBus *bus, int bus_num, uint8_t devfn) |
| { |
| bus = pci_find_bus_nr(bus, bus_num); |
| |
| if (!bus) |
| return NULL; |
| |
| return bus->devices[devfn]; |
| } |
| |
| #define ONBOARD_INDEX_MAX (16 * 1024 - 1) |
| |
| static void pci_qdev_realize(DeviceState *qdev, Error **errp) |
| { |
| PCIDevice *pci_dev = (PCIDevice *)qdev; |
| PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(pci_dev); |
| ObjectClass *klass = OBJECT_CLASS(pc); |
| Error *local_err = NULL; |
| bool is_default_rom; |
| uint16_t class_id; |
| |
| /* |
| * capped by systemd (see: udev-builtin-net_id.c) |
| * as it's the only known user honor it to avoid users |
| * misconfigure QEMU and then wonder why acpi-index doesn't work |
| */ |
| if (pci_dev->acpi_index > ONBOARD_INDEX_MAX) { |
| error_setg(errp, "acpi-index should be less or equal to %u", |
| ONBOARD_INDEX_MAX); |
| return; |
| } |
| |
| /* |
| * make sure that acpi-index is unique across all present PCI devices |
| */ |
| if (pci_dev->acpi_index) { |
| GSequence *used_indexes = pci_acpi_index_list(); |
| |
| if (g_sequence_lookup(used_indexes, |
| GINT_TO_POINTER(pci_dev->acpi_index), |
| g_cmp_uint32, NULL)) { |
| error_setg(errp, "a PCI device with acpi-index = %" PRIu32 |
| " already exist", pci_dev->acpi_index); |
| return; |
| } |
| g_sequence_insert_sorted(used_indexes, |
| GINT_TO_POINTER(pci_dev->acpi_index), |
| g_cmp_uint32, NULL); |
| } |
| |
| if (pci_dev->romsize != -1 && !is_power_of_2(pci_dev->romsize)) { |
| error_setg(errp, "ROM size %u is not a power of two", pci_dev->romsize); |
| return; |
| } |
| |
| /* initialize cap_present for pci_is_express() and pci_config_size(), |
| * Note that hybrid PCIs are not set automatically and need to manage |
| * QEMU_PCI_CAP_EXPRESS manually */ |
| if (object_class_dynamic_cast(klass, INTERFACE_PCIE_DEVICE) && |
| !object_class_dynamic_cast(klass, INTERFACE_CONVENTIONAL_PCI_DEVICE)) { |
| pci_dev->cap_present |= QEMU_PCI_CAP_EXPRESS; |
| } |
| |
| if (object_class_dynamic_cast(klass, INTERFACE_CXL_DEVICE)) { |
| pci_dev->cap_present |= QEMU_PCIE_CAP_CXL; |
| } |
| |
| pci_dev = do_pci_register_device(pci_dev, |
| object_get_typename(OBJECT(qdev)), |
| pci_dev->devfn, errp); |
| if (pci_dev == NULL) |
| return; |
| |
| if (pc->realize) { |
| pc->realize(pci_dev, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| do_pci_unregister_device(pci_dev); |
| return; |
| } |
| } |
| |
| /* |
| * A PCIe Downstream Port that do not have ARI Forwarding enabled must |
| * associate only Device 0 with the device attached to the bus |
| * representing the Link from the Port (PCIe base spec rev 4.0 ver 0.3, |
| * sec 7.3.1). |
| * With ARI, PCI_SLOT() can return non-zero value as the traditional |
| * 5-bit Device Number and 3-bit Function Number fields in its associated |
| * Routing IDs, Requester IDs and Completer IDs are interpreted as a |
| * single 8-bit Function Number. Hence, ignore ARI capable devices. |
| */ |
| if (pci_is_express(pci_dev) && |
| !pcie_find_capability(pci_dev, PCI_EXT_CAP_ID_ARI) && |
| pcie_has_upstream_port(pci_dev) && |
| PCI_SLOT(pci_dev->devfn)) { |
| warn_report("PCI: slot %d is not valid for %s," |
| " parent device only allows plugging into slot 0.", |
| PCI_SLOT(pci_dev->devfn), pci_dev->name); |
| } |
| |
| if (pci_dev->failover_pair_id) { |
| if (!pci_bus_is_express(pci_get_bus(pci_dev))) { |
| error_setg(errp, "failover primary device must be on " |
| "PCIExpress bus"); |
| pci_qdev_unrealize(DEVICE(pci_dev)); |
| return; |
| } |
| class_id = pci_get_word(pci_dev->config + PCI_CLASS_DEVICE); |
| if (class_id != PCI_CLASS_NETWORK_ETHERNET) { |
| error_setg(errp, "failover primary device is not an " |
| "Ethernet device"); |
| pci_qdev_unrealize(DEVICE(pci_dev)); |
| return; |
| } |
| if ((pci_dev->cap_present & QEMU_PCI_CAP_MULTIFUNCTION) |
| || (PCI_FUNC(pci_dev->devfn) != 0)) { |
| error_setg(errp, "failover: primary device must be in its own " |
| "PCI slot"); |
| pci_qdev_unrealize(DEVICE(pci_dev)); |
| return; |
| } |
| qdev->allow_unplug_during_migration = true; |
| } |
| |
| /* rom loading */ |
| is_default_rom = false; |
| if (pci_dev->romfile == NULL && pc->romfile != NULL) { |
| pci_dev->romfile = g_strdup(pc->romfile); |
| is_default_rom = true; |
| } |
| |
| pci_add_option_rom(pci_dev, is_default_rom, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| pci_qdev_unrealize(DEVICE(pci_dev)); |
| return; |
| } |
| |
| pci_set_power(pci_dev, true); |
| |
| pci_dev->msi_trigger = pci_msi_trigger; |
| } |
| |
| static PCIDevice *pci_new_internal(int devfn, bool multifunction, |
| const char *name) |
| { |
| DeviceState *dev; |
| |
| dev = qdev_new(name); |
| qdev_prop_set_int32(dev, "addr", devfn); |
| qdev_prop_set_bit(dev, "multifunction", multifunction); |
| return PCI_DEVICE(dev); |
| } |
| |
| PCIDevice *pci_new_multifunction(int devfn, const char *name) |
| { |
| return pci_new_internal(devfn, true, name); |
| } |
| |
| PCIDevice *pci_new(int devfn, const char *name) |
| { |
| return pci_new_internal(devfn, false, name); |
| } |
| |
| bool pci_realize_and_unref(PCIDevice *dev, PCIBus *bus, Error **errp) |
| { |
| return qdev_realize_and_unref(&dev->qdev, &bus->qbus, errp); |
| } |
| |
| PCIDevice *pci_create_simple_multifunction(PCIBus *bus, int devfn, |
| const char *name) |
| { |
| PCIDevice *dev = pci_new_multifunction(devfn, name); |
| pci_realize_and_unref(dev, bus, &error_fatal); |
| return dev; |
| } |
| |
| PCIDevice *pci_create_simple(PCIBus *bus, int devfn, const char *name) |
| { |
| PCIDevice *dev = pci_new(devfn, name); |
| pci_realize_and_unref(dev, bus, &error_fatal); |
| return dev; |
| } |
| |
| static uint8_t pci_find_space(PCIDevice *pdev, uint8_t size) |
| { |
| int offset = PCI_CONFIG_HEADER_SIZE; |
| int i; |
| for (i = PCI_CONFIG_HEADER_SIZE; i < PCI_CONFIG_SPACE_SIZE; ++i) { |
| if (pdev->used[i]) |
| offset = i + 1; |
| else if (i - offset + 1 == size) |
| return offset; |
| } |
| return 0; |
| } |
| |
| static uint8_t pci_find_capability_list(PCIDevice *pdev, uint8_t cap_id, |
| uint8_t *prev_p) |
| { |
| uint8_t next, prev; |
| |
| if (!(pdev->config[PCI_STATUS] & PCI_STATUS_CAP_LIST)) |
| return 0; |
| |
| for (prev = PCI_CAPABILITY_LIST; (next = pdev->config[prev]); |
| prev = next + PCI_CAP_LIST_NEXT) |
| if (pdev->config[next + PCI_CAP_LIST_ID] == cap_id) |
| break; |
| |
| if (prev_p) |
| *prev_p = prev; |
| return next; |
| } |
| |
| static uint8_t pci_find_capability_at_offset(PCIDevice *pdev, uint8_t offset) |
| { |
| uint8_t next, prev, found = 0; |
| |
| if (!(pdev->used[offset])) { |
| return 0; |
| } |
| |
| assert(pdev->config[PCI_STATUS] & PCI_STATUS_CAP_LIST); |
| |
| for (prev = PCI_CAPABILITY_LIST; (next = pdev->config[prev]); |
| prev = next + PCI_CAP_LIST_NEXT) { |
| if (next <= offset && next > found) { |
| found = next; |
| } |
| } |
| return found; |
| } |
| |
| /* Patch the PCI vendor and device ids in a PCI rom image if necessary. |
| This is needed for an option rom which is used for more than one device. */ |
| static void pci_patch_ids(PCIDevice *pdev, uint8_t *ptr, uint32_t size) |
| { |
| uint16_t vendor_id; |
| uint16_t device_id; |
| uint16_t rom_vendor_id; |
| uint16_t rom_device_id; |
| uint16_t rom_magic; |
| uint16_t pcir_offset; |
| uint8_t checksum; |
| |
| /* Words in rom data are little endian (like in PCI configuration), |
| so they can be read / written with pci_get_word / pci_set_word. */ |
| |
| /* Only a valid rom will be patched. */ |
| rom_magic = pci_get_word(ptr); |
| if (rom_magic != 0xaa55) { |
| PCI_DPRINTF("Bad ROM magic %04x\n", rom_magic); |
| return; |
| } |
| pcir_offset = pci_get_word(ptr + 0x18); |
| if (pcir_offset + 8 >= size || memcmp(ptr + pcir_offset, "PCIR", 4)) { |
| PCI_DPRINTF("Bad PCIR offset 0x%x or signature\n", pcir_offset); |
| return; |
| } |
| |
| vendor_id = pci_get_word(pdev->config + PCI_VENDOR_ID); |
| device_id = pci_get_word(pdev->config + PCI_DEVICE_ID); |
| rom_vendor_id = pci_get_word(ptr + pcir_offset + 4); |
| rom_device_id = pci_get_word(ptr + pcir_offset + 6); |
| |
| PCI_DPRINTF("%s: ROM id %04x%04x / PCI id %04x%04x\n", pdev->romfile, |
| vendor_id, device_id, rom_vendor_id, rom_device_id); |
| |
| checksum = ptr[6]; |
| |
| if (vendor_id != rom_vendor_id) { |
| /* Patch vendor id and checksum (at offset 6 for etherboot roms). */ |
| checksum += (uint8_t)rom_vendor_id + (uint8_t)(rom_vendor_id >> 8); |
| checksum -= (uint8_t)vendor_id + (uint8_t)(vendor_id >> 8); |
| PCI_DPRINTF("ROM checksum %02x / %02x\n", ptr[6], checksum); |
| ptr[6] = checksum; |
| pci_set_word(ptr + pcir_offset + 4, vendor_id); |
| } |
| |
| if (device_id != rom_device_id) { |
| /* Patch device id and checksum (at offset 6 for etherboot roms). */ |
| checksum += (uint8_t)rom_device_id + (uint8_t)(rom_device_id >> 8); |
| checksum -= (uint8_t)device_id + (uint8_t)(device_id >> 8); |
| PCI_DPRINTF("ROM checksum %02x / %02x\n", ptr[6], checksum); |
| ptr[6] = checksum; |
| pci_set_word(ptr + pcir_offset + 6, device_id); |
| } |
| } |
| |
| /* Add an option rom for the device */ |
| static void pci_add_option_rom(PCIDevice *pdev, bool is_default_rom, |
| Error **errp) |
| { |
| int64_t size = 0; |
| g_autofree char *path = NULL; |
| char name[32]; |
| const VMStateDescription *vmsd; |
| |
| /* |
| * In case of incoming migration ROM will come with migration stream, no |
| * reason to load the file. Neither we want to fail if local ROM file |
| * mismatches with specified romsize. |
| */ |
| bool load_file = !runstate_check(RUN_STATE_INMIGRATE); |
| |
| if (!pdev->romfile || !strlen(pdev->romfile)) { |
| return; |
| } |
| |
| if (!pdev->rom_bar) { |
| /* |
| * Load rom via fw_cfg instead of creating a rom bar, |
| * for 0.11 compatibility. |
| */ |
| int class = pci_get_word(pdev->config + PCI_CLASS_DEVICE); |
| |
| /* |
| * Hot-plugged devices can't use the option ROM |
| * if the rom bar is disabled. |
| */ |
| if (DEVICE(pdev)->hotplugged) { |
| error_setg(errp, "Hot-plugged device without ROM bar" |
| " can't have an option ROM"); |
| return; |
| } |
| |
| if (class == 0x0300) { |
| rom_add_vga(pdev->romfile); |
| } else { |
| rom_add_option(pdev->romfile, -1); |
| } |
| return; |
| } |
| |
| if (load_file || pdev->romsize == -1) { |
| path = qemu_find_file(QEMU_FILE_TYPE_BIOS, pdev->romfile); |
| if (path == NULL) { |
| path = g_strdup(pdev->romfile); |
| } |
| |
| size = get_image_size(path); |
| if (size < 0) { |
| error_setg(errp, "failed to find romfile \"%s\"", pdev->romfile); |
| return; |
| } else if (size == 0) { |
| error_setg(errp, "romfile \"%s\" is empty", pdev->romfile); |
| return; |
| } else if (size > 2 * GiB) { |
| error_setg(errp, |
| "romfile \"%s\" too large (size cannot exceed 2 GiB)", |
| pdev->romfile); |
| return; |
| } |
| if (pdev->romsize != -1) { |
| if (size > pdev->romsize) { |
| error_setg(errp, "romfile \"%s\" (%u bytes) " |
| "is too large for ROM size %u", |
| pdev->romfile, (uint32_t)size, pdev->romsize); |
| return; |
| } |
| } else { |
| pdev->romsize = pow2ceil(size); |
| } |
| } |
| |
| vmsd = qdev_get_vmsd(DEVICE(pdev)); |
| snprintf(name, sizeof(name), "%s.rom", |
| vmsd ? vmsd->name : object_get_typename(OBJECT(pdev))); |
| |
| pdev->has_rom = true; |
| memory_region_init_rom(&pdev->rom, OBJECT(pdev), name, pdev->romsize, |
| &error_fatal); |
| |
| if (load_file) { |
| void *ptr = memory_region_get_ram_ptr(&pdev->rom); |
| |
| if (load_image_size(path, ptr, size) < 0) { |
| error_setg(errp, "failed to load romfile \"%s\"", pdev->romfile); |
| return; |
| } |
| |
| if (is_default_rom) { |
| /* Only the default rom images will be patched (if needed). */ |
| pci_patch_ids(pdev, ptr, size); |
| } |
| } |
| |
| pci_register_bar(pdev, PCI_ROM_SLOT, 0, &pdev->rom); |
| } |
| |
| static void pci_del_option_rom(PCIDevice *pdev) |
| { |
| if (!pdev->has_rom) |
| return; |
| |
| vmstate_unregister_ram(&pdev->rom, &pdev->qdev); |
| pdev->has_rom = false; |
| } |
| |
| /* |
| * On success, pci_add_capability() returns a positive value |
| * that the offset of the pci capability. |
| * On failure, it sets an error and returns a negative error |
| * code. |
| */ |
| int pci_add_capability(PCIDevice *pdev, uint8_t cap_id, |
| uint8_t offset, uint8_t size, |
| Error **errp) |
| { |
| uint8_t *config; |
| int i, overlapping_cap; |
| |
| if (!offset) { |
| offset = pci_find_space(pdev, size); |
| /* out of PCI config space is programming error */ |
| assert(offset); |
| } else { |
| /* Verify that capabilities don't overlap. Note: device assignment |
| * depends on this check to verify that the device is not broken. |
| * Should never trigger for emulated devices, but it's helpful |
| * for debugging these. */ |
| for (i = offset; i < offset + size; i++) { |
| overlapping_cap = pci_find_capability_at_offset(pdev, i); |
| if (overlapping_cap) { |
| error_setg(errp, "%s:%02x:%02x.%x " |
| "Attempt to add PCI capability %x at offset " |
| "%x overlaps existing capability %x at offset %x", |
| pci_root_bus_path(pdev), pci_dev_bus_num(pdev), |
| PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), |
| cap_id, offset, overlapping_cap, i); |
| return -EINVAL; |
| } |
| } |
| } |
| |
| config = pdev->config + offset; |
| config[PCI_CAP_LIST_ID] = cap_id; |
| config[PCI_CAP_LIST_NEXT] = pdev->config[PCI_CAPABILITY_LIST]; |
| pdev->config[PCI_CAPABILITY_LIST] = offset; |
| pdev->config[PCI_STATUS] |= PCI_STATUS_CAP_LIST; |
| memset(pdev->used + offset, 0xFF, QEMU_ALIGN_UP(size, 4)); |
| /* Make capability read-only by default */ |
| memset(pdev->wmask + offset, 0, size); |
| /* Check capability by default */ |
| memset(pdev->cmask + offset, 0xFF, size); |
| return offset; |
| } |
| |
| /* Unlink capability from the pci config space. */ |
| void pci_del_capability(PCIDevice *pdev, uint8_t cap_id, uint8_t size) |
| { |
| uint8_t prev, offset = pci_find_capability_list(pdev, cap_id, &prev); |
| if (!offset) |
| return; |
| pdev->config[prev] = pdev->config[offset + PCI_CAP_LIST_NEXT]; |
| /* Make capability writable again */ |
| memset(pdev->wmask + offset, 0xff, size); |
| memset(pdev->w1cmask + offset, 0, size); |
| /* Clear cmask as device-specific registers can't be checked */ |
| memset(pdev->cmask + offset, 0, size); |
| memset(pdev->used + offset, 0, QEMU_ALIGN_UP(size, 4)); |
| |
| if (!pdev->config[PCI_CAPABILITY_LIST]) |
| pdev->config[PCI_STATUS] &= ~PCI_STATUS_CAP_LIST; |
| } |
| |
| uint8_t pci_find_capability(PCIDevice *pdev, uint8_t cap_id) |
| { |
| return pci_find_capability_list(pdev, cap_id, NULL); |
| } |
| |
| static char *pci_dev_fw_name(DeviceState *dev, char *buf, int len) |
| { |
| PCIDevice *d = (PCIDevice *)dev; |
| const char *name = NULL; |
| const pci_class_desc *desc = pci_class_descriptions; |
| int class = pci_get_word(d->config + PCI_CLASS_DEVICE); |
| |
| while (desc->desc && |
| (class & ~desc->fw_ign_bits) != |
| (desc->class & ~desc->fw_ign_bits)) { |
| desc++; |
| } |
| |
| if (desc->desc) { |
| name = desc->fw_name; |
| } |
| |
| if (name) { |
| pstrcpy(buf, len, name); |
| } else { |
| snprintf(buf, len, "pci%04x,%04x", |
| pci_get_word(d->config + PCI_VENDOR_ID), |
| pci_get_word(d->config + PCI_DEVICE_ID)); |
| } |
| |
| return buf; |
| } |
| |
| static char *pcibus_get_fw_dev_path(DeviceState *dev) |
| { |
| PCIDevice *d = (PCIDevice *)dev; |
| char name[33]; |
| int has_func = !!PCI_FUNC(d->devfn); |
| |
| return g_strdup_printf("%s@%x%s%.*x", |
| pci_dev_fw_name(dev, name, sizeof(name)), |
| PCI_SLOT(d->devfn), |
| has_func ? "," : "", |
| has_func, |
| PCI_FUNC(d->devfn)); |
| } |
| |
| static char *pcibus_get_dev_path(DeviceState *dev) |
| { |
| PCIDevice *d = container_of(dev, PCIDevice, qdev); |
| PCIDevice *t; |
| int slot_depth; |
| /* Path format: Domain:00:Slot.Function:Slot.Function....:Slot.Function. |
| * 00 is added here to make this format compatible with |
| * domain:Bus:Slot.Func for systems without nested PCI bridges. |
| * Slot.Function list specifies the slot and function numbers for all |
| * devices on the path from root to the specific device. */ |
| const char *root_bus_path; |
| int root_bus_len; |
| char slot[] = ":SS.F"; |
| int slot_len = sizeof slot - 1 /* For '\0' */; |
| int path_len; |
| char *path, *p; |
| int s; |
| |
| root_bus_path = pci_root_bus_path(d); |
| root_bus_len = strlen(root_bus_path); |
| |
| /* Calculate # of slots on path between device and root. */; |
| slot_depth = 0; |
| for (t = d; t; t = pci_get_bus(t)->parent_dev) { |
| ++slot_depth; |
| } |
| |
| path_len = root_bus_len + slot_len * slot_depth; |
| |
| /* Allocate memory, fill in the terminating null byte. */ |
| path = g_malloc(path_len + 1 /* For '\0' */); |
| path[path_len] = '\0'; |
| |
| memcpy(path, root_bus_path, root_bus_len); |
| |
| /* Fill in slot numbers. We walk up from device to root, so need to print |
| * them in the reverse order, last to first. */ |
| p = path + path_len; |
| for (t = d; t; t = pci_get_bus(t)->parent_dev) { |
| p -= slot_len; |
| s = snprintf(slot, sizeof slot, ":%02x.%x", |
| PCI_SLOT(t->devfn), PCI_FUNC(t->devfn)); |
| assert(s == slot_len); |
| memcpy(p, slot, slot_len); |
| } |
| |
| return path; |
| } |
| |
| static int pci_qdev_find_recursive(PCIBus *bus, |
| const char *id, PCIDevice **pdev) |
| { |
| DeviceState *qdev = qdev_find_recursive(&bus->qbus, id); |
| if (!qdev) { |
| return -ENODEV; |
| } |
| |
| /* roughly check if given qdev is pci device */ |
| if (object_dynamic_cast(OBJECT(qdev), TYPE_PCI_DEVICE)) { |
| *pdev = PCI_DEVICE(qdev); |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| int pci_qdev_find_device(const char *id, PCIDevice **pdev) |
| { |
| PCIHostState *host_bridge; |
| int rc = -ENODEV; |
| |
| QLIST_FOREACH(host_bridge, &pci_host_bridges, next) { |
| int tmp = pci_qdev_find_recursive(host_bridge->bus, id, pdev); |
| if (!tmp) { |
| rc = 0; |
| break; |
| } |
| if (tmp != -ENODEV) { |
| rc = tmp; |
| } |
| } |
| |
| return rc; |
| } |
| |
| MemoryRegion *pci_address_space(PCIDevice *dev) |
| { |
| return pci_get_bus(dev)->address_space_mem; |
| } |
| |
| MemoryRegion *pci_address_space_io(PCIDevice *dev) |
| { |
| return pci_get_bus(dev)->address_space_io; |
| } |
| |
| static void pci_device_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *k = DEVICE_CLASS(klass); |
| |
| k->realize = pci_qdev_realize; |
| k->unrealize = pci_qdev_unrealize; |
| k->bus_type = TYPE_PCI_BUS; |
| device_class_set_props(k, pci_props); |
| } |
| |
| static void pci_device_class_base_init(ObjectClass *klass, void *data) |
| { |
| if (!object_class_is_abstract(klass)) { |
| ObjectClass *conventional = |
| object_class_dynamic_cast(klass, INTERFACE_CONVENTIONAL_PCI_DEVICE); |
| ObjectClass *pcie = |
| object_class_dynamic_cast(klass, INTERFACE_PCIE_DEVICE); |
| ObjectClass *cxl = |
| object_class_dynamic_cast(klass, INTERFACE_CXL_DEVICE); |
| assert(conventional || pcie || cxl); |
| } |
| } |
| |
| /* |
| * Get IOMMU root bus, aliased bus and devfn of a PCI device |
| * |
| * IOMMU root bus is needed by all call sites to call into iommu_ops. |
| * For call sites which don't need aliased BDF, passing NULL to |
| * aliased_[bus|devfn] is allowed. |
| * |
| * @piommu_bus: return root #PCIBus backed by an IOMMU for the PCI device. |
| * |
| * @aliased_bus: return aliased #PCIBus of the PCI device, optional. |
| * |
| * @aliased_devfn: return aliased devfn of the PCI device, optional. |
| */ |
| static void pci_device_get_iommu_bus_devfn(PCIDevice *dev, |
| PCIBus **piommu_bus, |
| PCIBus **aliased_bus, |
| int *aliased_devfn) |
| { |
| PCIBus *bus = pci_get_bus(dev); |
| PCIBus *iommu_bus = bus; |
| int devfn = dev->devfn; |
| |
| while (iommu_bus && !iommu_bus->iommu_ops && iommu_bus->parent_dev) { |
| PCIBus *parent_bus = pci_get_bus(iommu_bus->parent_dev); |
| |
| /* |
| * The requester ID of the provided device may be aliased, as seen from |
| * the IOMMU, due to topology limitations. The IOMMU relies on a |
| * requester ID to provide a unique AddressSpace for devices, but |
| * conventional PCI buses pre-date such concepts. Instead, the PCIe- |
| * to-PCI bridge creates and accepts transactions on behalf of down- |
| * stream devices. When doing so, all downstream devices are masked |
| * (aliased) behind a single requester ID. The requester ID used |
| * depends on the format of the bridge devices. Proper PCIe-to-PCI |
| * bridges, with a PCIe capability indicating such, follow the |
| * guidelines of chapter 2.3 of the PCIe-to-PCI/X bridge specification, |
| * where the bridge uses the seconary bus as the bridge portion of the |
| * requester ID and devfn of 00.0. For other bridges, typically those |
| * found on the root complex such as the dmi-to-pci-bridge, we follow |
| * the convention of typical bare-metal hardware, which uses the |
| * requester ID of the bridge itself. There are device specific |
| * exceptions to these rules, but these are the defaults that the |
| * Linux kernel uses when determining DMA aliases itself and believed |
| * to be true for the bare metal equivalents of the devices emulated |
| * in QEMU. |
| */ |
| if (!pci_bus_is_express(iommu_bus)) { |
| PCIDevice *parent = iommu_bus->parent_dev; |
| |
| if (pci_is_express(parent) && |
| pcie_cap_get_type(parent) == PCI_EXP_TYPE_PCI_BRIDGE) { |
| devfn = PCI_DEVFN(0, 0); |
| bus = iommu_bus; |
| } else { |
| devfn = parent->devfn; |
| bus = parent_bus; |
| } |
| } |
| |
| iommu_bus = parent_bus; |
| } |
| |
| assert(0 <= devfn && devfn < PCI_DEVFN_MAX); |
| assert(iommu_bus); |
| |
| if (pci_bus_bypass_iommu(bus) || !iommu_bus->iommu_ops) { |
| iommu_bus = NULL; |
| } |
| |
| *piommu_bus = iommu_bus; |
| |
| if (aliased_bus) { |
| *aliased_bus = bus; |
| } |
| |
| if (aliased_devfn) { |
| *aliased_devfn = devfn; |
| } |
| } |
| |
| AddressSpace *pci_device_iommu_address_space(PCIDevice *dev) |
| { |
| PCIBus *bus; |
| PCIBus *iommu_bus; |
| int devfn; |
| |
| pci_device_get_iommu_bus_devfn(dev, &iommu_bus, &bus, &devfn); |
| if (iommu_bus) { |
| return iommu_bus->iommu_ops->get_address_space(bus, |
| iommu_bus->iommu_opaque, devfn); |
| } |
| return &address_space_memory; |
| } |
| |
| bool pci_device_set_iommu_device(PCIDevice *dev, HostIOMMUDevice *hiod, |
| Error **errp) |
| { |
| PCIBus *iommu_bus, *aliased_bus; |
| int aliased_devfn; |
| |
| /* set_iommu_device requires device's direct BDF instead of aliased BDF */ |
| pci_device_get_iommu_bus_devfn(dev, &iommu_bus, |
| &aliased_bus, &aliased_devfn); |
| if (iommu_bus && iommu_bus->iommu_ops->set_iommu_device) { |
| hiod->aliased_bus = aliased_bus; |
| hiod->aliased_devfn = aliased_devfn; |
| return iommu_bus->iommu_ops->set_iommu_device(pci_get_bus(dev), |
| iommu_bus->iommu_opaque, |
| dev->devfn, hiod, errp); |
| } |
| return true; |
| } |
| |
| void pci_device_unset_iommu_device(PCIDevice *dev) |
| { |
| PCIBus *iommu_bus; |
| |
| pci_device_get_iommu_bus_devfn(dev, &iommu_bus, NULL, NULL); |
| if (iommu_bus && iommu_bus->iommu_ops->unset_iommu_device) { |
| return iommu_bus->iommu_ops->unset_iommu_device(pci_get_bus(dev), |
| iommu_bus->iommu_opaque, |
| dev->devfn); |
| } |
| } |
| |
| void pci_setup_iommu(PCIBus *bus, const PCIIOMMUOps *ops, void *opaque) |
| { |
| /* |
| * If called, pci_setup_iommu() should provide a minimum set of |
| * useful callbacks for the bus. |
| */ |
| assert(ops); |
| assert(ops->get_address_space); |
| |
| bus->iommu_ops = ops; |
| bus->iommu_opaque = opaque; |
| } |
| |
| static void pci_dev_get_w64(PCIBus *b, PCIDevice *dev, void *opaque) |
| { |
| Range *range = opaque; |
| uint16_t cmd = pci_get_word(dev->config + PCI_COMMAND); |
| int i; |
| |
| if (!(cmd & PCI_COMMAND_MEMORY)) { |
| return; |
| } |
| |
| if (IS_PCI_BRIDGE(dev)) { |
| pcibus_t base = pci_bridge_get_base(dev, PCI_BASE_ADDRESS_MEM_PREFETCH); |
| pcibus_t limit = pci_bridge_get_limit(dev, PCI_BASE_ADDRESS_MEM_PREFETCH); |
| |
| base = MAX(base, 0x1ULL << 32); |
| |
| if (limit >= base) { |
| Range pref_range; |
| range_set_bounds(&pref_range, base, limit); |
| range_extend(range, &pref_range); |
| } |
| } |
| for (i = 0; i < PCI_NUM_REGIONS; ++i) { |
| PCIIORegion *r = &dev->io_regions[i]; |
| pcibus_t lob, upb; |
| Range region_range; |
| |
| if (!r->size || |
| (r->type & PCI_BASE_ADDRESS_SPACE_IO) || |
| !(r->type & PCI_BASE_ADDRESS_MEM_TYPE_64)) { |
| continue; |
| } |
| |
| lob = pci_bar_address(dev, i, r->type, r->size); |
| upb = lob + r->size - 1; |
| if (lob == PCI_BAR_UNMAPPED) { |
| continue; |
| } |
| |
| lob = MAX(lob, 0x1ULL << 32); |
| |
| if (upb >= lob) { |
| range_set_bounds(®ion_range, lob, upb); |
| range_extend(range, ®ion_range); |
| } |
| } |
| } |
| |
| void pci_bus_get_w64_range(PCIBus *bus, Range *range) |
| { |
| range_make_empty(range); |
| pci_for_each_device_under_bus(bus, pci_dev_get_w64, range); |
| } |
| |
| static bool pcie_has_upstream_port(PCIDevice *dev) |
| { |
| PCIDevice *parent_dev = pci_bridge_get_device(pci_get_bus(dev)); |
| |
| /* Device associated with an upstream port. |
| * As there are several types of these, it's easier to check the |
| * parent device: upstream ports are always connected to |
| * root or downstream ports. |
| */ |
| return parent_dev && |
| pci_is_express(parent_dev) && |
| parent_dev->exp.exp_cap && |
| (pcie_cap_get_type(parent_dev) == PCI_EXP_TYPE_ROOT_PORT || |
| pcie_cap_get_type(parent_dev) == PCI_EXP_TYPE_DOWNSTREAM); |
| } |
| |
| PCIDevice *pci_get_function_0(PCIDevice *pci_dev) |
| { |
| PCIBus *bus = pci_get_bus(pci_dev); |
| |
| if(pcie_has_upstream_port(pci_dev)) { |
| /* With an upstream PCIe port, we only support 1 device at slot 0 */ |
| return bus->devices[0]; |
| } else { |
| /* Other bus types might support multiple devices at slots 0-31 */ |
| return bus->devices[PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 0)]; |
| } |
| } |
| |
| MSIMessage pci_get_msi_message(PCIDevice *dev, int vector) |
| { |
| MSIMessage msg; |
| if (msix_enabled(dev)) { |
| msg = msix_get_message(dev, vector); |
| } else if (msi_enabled(dev)) { |
| msg = msi_get_message(dev, vector); |
| } else { |
| /* Should never happen */ |
| error_report("%s: unknown interrupt type", __func__); |
| abort(); |
| } |
| return msg; |
| } |
| |
| void pci_set_power(PCIDevice *d, bool state) |
| { |
| if (d->has_power == state) { |
| return; |
| } |
| |
| d->has_power = state; |
| pci_update_mappings(d); |
| memory_region_set_enabled(&d->bus_master_enable_region, |
| (pci_get_word(d->config + PCI_COMMAND) |
| & PCI_COMMAND_MASTER) && d->has_power); |
| if (!d->has_power) { |
| pci_device_reset(d); |
| } |
| } |
| |
| static const TypeInfo pci_device_type_info = { |
| .name = TYPE_PCI_DEVICE, |
| .parent = TYPE_DEVICE, |
| .instance_size = sizeof(PCIDevice), |
| .abstract = true, |
| .class_size = sizeof(PCIDeviceClass), |
| .class_init = pci_device_class_init, |
| .class_base_init = pci_device_class_base_init, |
| }; |
| |
| static void pci_register_types(void) |
| { |
| type_register_static(&pci_bus_info); |
| type_register_static(&pcie_bus_info); |
| type_register_static(&cxl_bus_info); |
| type_register_static(&conventional_pci_interface_info); |
| type_register_static(&cxl_interface_info); |
| type_register_static(&pcie_interface_info); |
| type_register_static(&pci_device_type_info); |
| } |
| |
| type_init(pci_register_types) |